iOS App User Manual Install our iPhone/iPad app from AppStore by searching "Wireless Tag List". Use the 12 digit serial numbers on your Ethernet Tag Manager to create a login. Keep the serial number in a safe place. In the login screen, tap "Create a login to access Tag Manager" button. Fill in the serial number (case insensitive), login email (used to recover password), and choose a password. Tap "Create" button in the upper right corner to create an account. Uncheck "Allow creating more accounts...
Follow this step to associate each new Tags with the Tag Manager. In the tag list screen, tap "+" button at the lower right corner. An unassociated tag periodically broadcasts information about itself when powered on. Click "Scan" button to receive this information. When an unassociated tag is found, its information is displayed. Assign a name and comment (optional) to the tag, then tap "Associate".
You can edit tag names, comments and assign pictures to each Wireless Sensor Tag. Assign Picture Tap the picture icon in each Tag's screen to bring up the camera, or delete the picture if you already have one for the tag. Take the picture and use finger to move or scale. The picture is now assign to the tag, and will be automatically visible on other devices accessing the same tag list in a few seconds. Edit Name In the tag list screen, tap on the tag you want to edit to open the tag screen.
list.
Motion sensor, temperature monitoring, and out-of-range notification are turned off until they are needed to conserve battery. Follow the steps below to turn them on/off as needed. Motion Sensor Tap the tag of interest on the list screen to open the details screen, and tap the keypad icon at the bottom. Instead of arming/disarming motion sensor for each tag individually, you can also tap the keypad icon in the tag list screen to arm/diarm all motion sensor tags.
Open the temperature sensor options for each tag individually by tapping the gear icon at the bottom. The temperature sensor often needs calibration to remove an offset. In the "Calibrate Temperature at Tag" section, set the correct current temperature, and tap the "Calibrate" button. Turn on "Monitor Temperature", choose notification settings you want, and tap "Save". The tag will notify you when the temperature exceeds upper or lower limits, or returned to normal range.
Tune the sensitivity and responsiveness of the motion sensor to suit your application. In motion detection mode, choose to remember moved state indefinitely or reset to armed state after a while. In door/gate mode, choose the threshold angle (23 degree is recommended for automatic garage doors, 2~5 degree for regular doors), or choose to get notified only when door is opened for too long. Choose to get notified by emails, tweets, speech, or whether to make tag beep upon motion.
When not in door/gate mode, after movement is detected, by default the system remembers the tag has been moved indefinitely. Instead you can choose to have the tag automatically reset to armed state after a while. When in door/gate mode, you can choose to be notified only when it is been open for longer than a certain time period. You can choose to be notified by email, have the system post a tweet on your Twitter account, beep or speak on your phones, or make the tag beep.
Every wireless sensor tag has a beep function to help you find missing tags. Attach the tag to key chains, put inside your wallet, or strap to TV remote controls, and never waste time looking for these items again. In the tag list screen, tap on the tag you want to beep. The tag details screen opens. Beep the tag by tapping on the speaker button at the upper right corner. To change beep options, scroll down until you see "Beep option". Tap on it to choose the option.
Each tag automatically logs temperature and each time it is moved, opened or closed, so you can always check what happened while you were away. Door Stats In the tag detail screen, scroll down and tap on "Door Stats" button. For every day in the past 2 months (when there is data available), number of times door is opened and average duration vs. time of the day are displayed. When you tap on anywhere on the graph for a particular date, a detail history for that day is displayed.
scroll down and tap on "Temperature Stats" button. months (when there is data available), temperature at that tag and battery voltage vs. time of the day are displayed. This device complies with Par t 15 of the FCC Rules. Oper ation is subject to the following two conditions: 1. This device may not cause har mful inter fer ence. 2. This device must accept any inter fer ence r eceived, including inter fer ence that may cause undesir ed oper ation.