User's Manual
Start Here
Beeper Tag
Motion Sensor Tag
Wireless Tag Manager
Plug a Wireless Tag Manager
USB Stick into your computer’s USB port.
If you see the following window popping up, choose
“Open folder to view les.”
Otherwise, go to “My Computer” and double click Tag
Manager like below.
You should see the les inside like below.
Double click WirelessTagManager.exe to start the
program.
Click Add New in the Wireless Tag Manager window.
This step asscociates a new Beeper Tag or Motion Sen-
sor Tag with this Tag Manager.
Pick either a Beeper or Motion Sensor Tag, remove the
insulating tape from the hole below. A light on the tag
should start to ash, indicating that this tag has not yet
been associated with a Tag Manager. Click “Next”.
1 2 3
Step 1 Step 2 Step 3
If the new Tag is recognized, its information will be
displayed below and the Next button will become
active.
Click “Next” and the recognized tag will be pro-
grammed wirelessly and become associated with this
tag manager. The tag will beep twice and stop ashing.
In this next and nal step, assign a name to the new
tag. For example “My Wallet”, “The TV Remote” or “My
Car’s Key”.