Instruction Manual
The following instructions have been developed for optimized use of your Cansonic UltraDash S1 camera. Each of the default settings have been put forth for having the highest quality video while maintaining the peace of mind when the camera is on. It is not recommended you adjust the default settings. EASY TO USE: With new technology at everyone’s hand, the creators of Cansonic have developed an easy to use camera for everyday use.
TABLE OF CONTENT The Cansonic UltraDash S1......................................................................01 Precautions............................................................................................03 Product Specs.........................................................................................04 Package Contents...................................................................................05 Product Features....................................................................
PRECAUTIONS: Please read the following instructions carefully. Proper Use of the Cansonic UltraDash S1 is necessary in order to avoid operational problems that may occur. WARNING: DO NOT expose UltraDash S1 to moisture under any circumstance. The camera is NOT WATERPROOF and will become defective as result and may put the user at risk of electric shock or fire exposure. CAUTION: Do not perform any activities or services with the device unless you are qualified to control the object.
PRODUCT SPECS Model Number / Name UltraDash S1 Power Requirements 5V / 1.5A Power Supply 12-24Vdc Car Power Cable (supplied) Output: 5Vdc Lens Type / Angle / Aperture 6G / 140° / F1.8 Recording Resolution 1920 x 1080 @ 30fps (default) Screen Size 2.
PACKAGE CONTENTS Please check the contents of your UltraDash product. UltraDash S1 Suction mount Car Power Cable USB Cable * Product appearance may differ slightly to that shown above. PRODUCT FEATURES We here at Cansonic would like to thank you for choosing UltraDash S1 as your choice for camera. We strive to bring you the highest quality products to allow you to capture memories and content. In the section below, we will show you the features of your new camera. Enjoy! -2.
-Built-In Microphone & Speaker Our Cameras have a built in microphone as well as speaker for you to be able to use. The feature also works with the cameras playback feature. Cansonic UltraDash S1 SUCTION MOUNT We have specific goals when it comes to creating a product anyone can use. Our Suction Mount lets any and all types of vehicles to carry your camera around. Below are instructions for you to install the mount to your car with your new Cansonic UltraDash S1. 1 2 3 4 1.
placement. Remember to have a clean surface and place it where it will not be a distraction to the drivers view. CAMERA PARTS & CONTROL Front 1 2 3 1. Camera mounting point You are able to attach the camera to the provided mount here. 2. Camera Lens The Cansonic UltraDash S1 camera lens has a standard wide angle view (140 Degrees) and a 6 element glass lens for the best available picture quality. 3.
CAMERA PARTS & CONTROL Back 4 12 11 10 9 8 7 6 5 4.Screen The UltraDash S1 is equipped with a standard 2.7 LCD color screen to let you view your files with its playback feature. 5.Protect File Button In the event of an accident, we created this feature for convenient use of the protect file feature the UltraDash S1 offers. Simply press the button and hold until a beep sound is produced. This will indicate that the file was successfully protected. 6.
CAMERA PARTS & CONTROL Back (Cont.) 4 12 11 10 9 8 7 6 5 9.UP/Microphone OFF button UP: This button will allow you to navigate through the cameras menu and can select the next video during the cameras playback feature. Microphone OFF: By pressing down on this button you will be able to turn on and off the microphone (All audio recordings). This feature is only available through Video Mode. 10.
CAMERA PARTS & CONTROL TOP 13 14 13. AV Outlet This feature is available to let your Cansonic UltraDash S1 connect to your television directly by using the AV Cable (sold separately) 14. DC-IN/USB Port By connecting the UltraDash S1 with the supplied power cord you are able to charge the camera. This will also be utilized to let you connect the USB cord to your PC.
CAMERA PARTS & CONTROL SIDES 16 15 17 15. RESET Button If your camera is having problems, the button allows for the camera to undergo the ‘Default Settings’ reset. Simply press the button until the camera shuts off and restarts again. 16. MicroSD Card Slot You can insert the recommended memory card in this location. Align the gold parts of the memory card correctly facing the back of the UltraDash S1. 17. Microphone The camera come equipped with an integrated microphone for audio recording.
IN VEHICLE INSTALLATION Thank you for choosing the Cansonic UltraDash S1! Our team wants it to be known that we take pride in creating a quality camera at an affordable price and for that we have come up with UltraDash S1. The following instructions below are for first time installation. You can have day-to-day use of the UltraDash S1, simply remove it from the mount.
• ATTACH THE MOUNT TO THE WINDSHIELD & START RECORDING When you are holding the suction that will hold the mount, you have to remove the protective plastic film. Once you remove it, select a location to put the suction cup in place. When you have found a suitable location, remember to clean the area with a dry/clean cloth to allow a strong bond between the glass and the suction cup. -Release the locking lever from the mount by pulling down on it.
-Plug the power cable into the camera to allow the camera to charge. 12-24V DC -The Cansonic UltraDash S1 will automatically start recording once power has been made available from the in-car power supply. Just start the vehicle and start driving! -If there is no cigarette outlet for your vehicle, use the USB power cord supplied within the camera packaging. TIP: -Remember to plug the car power cord to the camera in the power socket located on the top right corner.
WARNING: Please remember to ALWAYS pay attention to the road ahead you. Driving with distractions on the road may result in penalties, accidents, or even death. PLEASE DRIVE CAREFULLY. Always remember to place the mount in a location that will not obstruct your view of the road. Place the mount in location high and preferably on the side of the passenger behind the rearview mirror. The UltraDash S1 must view through the windshield wiping area so it can record the road ahead clearly.
VIDEO MODE The Cansonic UltraDash S1’s video mode is designed be easy to use. We have created a key to help you better understand the cameras unique details. The following information will help you better understand the icons and their relative functions. 2 3 4 5 6 7 P 1 08/08/2016 12 11 10 9 1. Mode: This will indicate when the UltraDash S1 is in video mode. 2. Video Length: This will indicate the length of the recording in progress. 3.
VIDEO MENU Access the video menu by pressing the MENU button while in video mode. Video Menu Resolution Exposure Exposure Audio Recording Video Length MENU Back OK Enter The UltraDash S1 navigations function help select where you would like to access, by pressing UP or DOWN and the OK button to enter the settings sub-menu. Once you access the sub-menu, while using the up and down buttons, highlight the desired setting and press the OK to confirm your selection and to return to the VIDEO MENU.
VIDEO MENU (Cont.) Video Menu Information Resolution Stamp G Sensor Exposure MENU Back OK Enter • INFORMATION STAMP: You can turn ON or OFF the cameras model number as well as the TIME & DATE stamps shown on the recorded files. o OPTIONS: On and Off DEFAULT SETTINGS: On o TIP: Turning off this function will also turn the NUMBER PLATE STAMP off as well.
PHOTO MODE While the camera is on, press down on the MODE button to switch to PHOTO MODE. The following instructions are to let you know how the PHOTO MODE camera setting works. In it you will be able to know when and how the camera is functioning as well as adjusting any settings you feel are appropriate. Thank you for choosing Cansonic! 1 2 08/08/2016 6 5 4 3 1. MODE: This will indicate when the UltraDash S1 is in PHOTO MODE. 2.
PHOTO MENU While pressing down on the MENU button, you will be able to access the PHOTO MODE MENU. Photo Video Menu Resolution Exposure Exposure Time & Date Stamp MENU Back OK Enter The Cansonic UltraDash S1 settings have been selected to allow the use of the photo mode without the need to change any settings. If you need to change these settings, follow the instructions below. Use the UP and DOWN buttons to select the functions you would like to adjust.
PLAYBACK MODE When you would like to view your cameras previous recording files, go ahead and press down on the menu button. Select PLAYBACK MODE and you will access all your files on the MicroSD card! Press the UP or down buttons to navigate through the menu. These buttons will also allow you to move forward or backwards through the video files. -Depending on the type of file recorded, the on-screen information and playback function will differ. VIDEO FILES 2 3 1 9 8 OK : / II MODE : UP: 23550001.
DOWN: Press down the DOWN button to select the next file. -Only available once playback has been stopped. UP: Press down on the UP button to select the previous file. -Only available once playback has been stopped. PLAYBACK MODE (Cont.) PHOTO FILES 3 2 1 01140002.JPG 8 23:55:54 08/08/2016 UP: 7 4 5 DN: 6 1. MODE: When the icon appears on-screen, the UltraDash S1 is in PLAYBACK MODE. 2. FILE TYPE: The camera icon will appear when a photo is being viewed. 3.
PLAYBACK MODE (Cont.) DELETING FILES Highlight the DELETE FILES option and press the OK button down.
PLAYBACK MODE (Cont.) PROTECTING FILES: Highlight the PROTECT FILES option and press the OK button.
SETUP MENU The SETUP MENU is accessed by pressing on the MENU button twice. Setup Video Menu Resolution Parking Mode Exposure Time & Date Audio Recording Language Video Length Screen Saver MENU Back OK Enter The Cansonic UltraDash S1 settings have been selected to allow the use of the camera without the need to change any settings. If you need to change these settings, read the following instructions.
SETUP MENU (Cont.) Video Menu Setup Device Sounds Resolution Auto Power Off Exposure Number Plate Audio Recording Format SD Card Video Length MENU Back OK Enter • DEVICE SOUNDS: You can turn ON or OFF the beep sound the camera makes when the buttons are pushed or when the device shuts down. THIS DOES NOT MUTE THE STARTUP SOUND. i. OPTIONS: On and Off DEFAULT SETTINGS: On • AUTO POWER OFF: You are able to adjust the timing of the AUTO POWER OFF function.
SETUP MENU (Cont.) Video Menu Setup System Info Resolution Restore ExposureDefaults MENU Back OK Enter • SYSTEM INFO: Display the version number of the Cansonic UltraDash S1 firmware. • RESTORE DEFAULTS: Reset the Cansonic UltraDash S1 to the factory settings.
USB STORAGE & PC CAMERA Thank you for choosing Cansonic! The content below will instruct you on how you will be able to store your picture and video files from your Cansonic UltraDash S1 to your home PC or MAC computer. Please keep in mind that you will need the provided DC-IN USB cable in order for the transfer to properly function. Please use your provided USB cable for the UltraDash S1 and connect it. Once the connection has been established, the UltraDash S1 will turn on on its own.
DASH CAM – Windows & Mac The Cansonic UltraDash S1 standard turn on feature allows for you to use the camera anywhere you desire. Simply turn on the camera and let your internal battery run as the camera records or takes pictures. A fully charged UltraDash S1 will have enough power to last estimated 2 hours depending on how you utilize the camera. TIP: Remember to always turn off the UltraDash S1 before disconnecting from your computer.
TROUBLE SHOOTING Blurred Image (Video) The UltraDash S1 comes with a protective lens cover for the cameras lens, be sure to remove it. Wipe the lens with a soft cloth until any debris/stains are removed. Clean your vehicles windshield where the camera is placed. Unable to insert Micro SD Memory Card The Cansonic UltraDash S1 memory card slot is fitted to allow easy access and removal to the memory card. Be sure to align the memory card with the memory slot in the UltraDash S1.
I cannot save my video files to my computer through the mass storage feature If you want to modify, upload (firmware) or delete file on the memory card, you must take the memory card out to operate on your PC/Mac. The suction cup does not attach to the surface Be sure the protective film on the suction cup has been removed. Before you place it on a surface, make sure the surface is clean and smooth. Wipe down the surface and add a small amount of moisture to the suction cup for allow for a stronger bond.
My UltraDash S1’s battery powers up for 6 minutes only Your cameras Auto Power Off feature is working properly. In the event of power loss, the camera will turn off automatically. Remember, this is not intended as an alternate power source and will need to be charged regularly. A “Card Error” message appears on my UltraDash S1 This indicates that the Micro SD card is not properly formatted to your UltraDash S1.
Instagram: @cansonic_usa Facebook: @cansonicusa Youtube: Cansonic USA Official: www.cansonic.