<< Previous Next >> Installing Your Multifunction to Additional Computers on Your Network PIXMA MX712 Mac and Windows OS 1
<< Previous Next >> Installing Your Multifunction to Additional Computers on Your Network PIXMA MX712 Mac and Windows OS Preparing to Connect My Multifunction To My Network Network Requirements Notes on Wireless Connection Using the Machine from Additional Computers 3 3 4 5 2
Preparing to Connect My Multifunction To My Network << Previous Next >> Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network. Wireless Connection Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that configuration of the computer and access point or router is complete.
Preparing to Connect My Multifunction To My Network << Previous Next >> An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported. Notes on Network Connection • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device's instruction manual or contact its manufacturer.
Using the Machine from Additional Computers << Previous Next >> Software Installation If the machine is already connected to a wireless connection, it can be used from additional computers on the same network. To use from additional computers IMPORTANT • Log on as the administrator (or a member of the Administrators group). • Quit all running applications before installation.
Using the Machine from Additional Computers << Previous Next >> Installing the PIXMA MX712 on Additional Computers If your printer is already on your network, and you wish to use the printer from additional computers, you will need to install the printer software on the other computers. A step-by-step walk through of the wireless setup is built in to the installation routine of the software that shipped with your PIXMA.
Using the Machine from Additional Computers << Previous Installing the PIXMA MX712 on Additional Computers If you can’t find your CD-ROM, you may download the MX710 series Mini Master Setup, which includes the same step-by-step installation as the CDROM, by following the instructions below: 1. Click here to access the MX712 Drivers & Software page. 2. Select the operating system of your computer (see example below). 3. 4. 5. 6. Expand the ‘Drivers’ section by clicking the red triangle.