CONTENTS INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 8 OPTIONS 9 SCANNER SPECIFICATIONS Appendix fi-5110C Image Scanner Operator's Guide P3PC-1082-01EN
CONTENTS INTRODUCTION Regulatory Information Introduction Thank you for purchasing the fi-5110C duplex color scanner. This document describes how to handle fi-5110C Duplex Color scanner and basic operation methods. Before you start using fi-5110C Duplex Color scanner, be sure to thoroughly read this manual to ensure the correct use.
CONTENTS Regulatory Information 1 INTRODUCTION 2 3 FCC Declaration Regulatory Information Trademarks Note, Liability Preface Safety Precautions 1 NAMES AND FUNCTIONS OF PARTS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CONTENTS Regulatory Information(2) 1 INTRODUCTION 2 3 Canadian DOC Regulations Regulatory Information Trademarks Note, Liability Preface Safety Precautions 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS This digital apparatus does not exceed the Class B limit for radio noise emissions from digital apparatus set out in the Radio interference Regulations of the Canadian Department of Communications. This Class B digital apparatus complies with Canadian ICES-003.
CONTENTS Regulatory Information(3) 1 INTRODUCTION 2 3 Use in High-safety Applications Regulatory Information Trademarks Note, Liability Preface Safety Precautions 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS This product has been designed and manufactured on the assumption that it will be used in office, personal, domestic, regular industrial, and general-purpose applications.
CONTENTS Trademarks 1 2 Trademarks INTRODUCTION Regulatory Information Trademarks Note, Liability Preface Safety Precautions 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation in the United States and/or other countries.
CONTENTS Trademarks(2) 1 2 Manufacturer INTRODUCTION PFU LIMITED Regulatory Information Trademarks Note, Liability International Sales Dept.
CONTENTS Note, Liability BEFORE USING THIS PRODUCT, PLEASE READ THIS MANUAL CAREFULLY. IF THIS PRODUCT IS NOT USED CORRECTLY, UNEXPECTED INJURY CAN OCCUR TO USERS OR BYSTANDERS Keep this manual in a safe place so that it can be easily referred to during use of this product.
CONTENTS Preface 1 2 3 Safety Precautions INTRODUCTION Trademarks This manual describes important details for ensuring the safe and correct use of this product. Thoroughly read this manual before you start to use this product. In particular, be sure to read and fully understand the Safety Precautions described in this manual before you use this product. Note, Liability Also, store this manual in a safe place so that it can be easily referred to during use of this product.
CONTENTS Preface(2) 1 2 3 Symbols Used In This Manual INTRODUCTION Regulatory Information This manual uses the following symbols in the explanations in addition to the warning indications. Trademarks Note, Liability This symbol alerts operators to particularly important information. Be sure to read this information. Preface This symbol alerts operators to helpful advice regarding operation.
CONTENTS Preface(3) 1 2 3 Screen Examples In This Manual INTRODUCTION Regulatory Information Trademarks Note, Liability Preface The screen examples in this manual are subject to change without notice in the interest of product improvement. If the actual displayed screen differs from the screen examples in this manual, operate by following the actual displayed screen while referring to the User's Manual of the scanner application you are using.
CONTENTS Safety Precautions 1 2 3 4 INTRODUCTION Regulatory Information WARNING Trademarks Note, Liability Preface The following are the important warnings described in this manual. Safety Precautions 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES Do not damage the AC cable. A damaged AC cable may cause fire or electric shock.
CONTENTS Safety Precautions(2) 1 2 3 4 INTRODUCTION Regulatory Information Trademarks Note, Liability Do not install the scanner in locations subject to oil smoke, steam, humidity, and dust. Preface Safety Precautions 1 NAMES AND FUNCTIONS OF PARTS Do not install the scanner in locations subject to oil smoke, steam, humidity, and dust. Doing so might cause a fire or electric shock. 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS Turn the scanner OFF if it is damaged.
CONTENTS Safety Precautions(3) 1 2 3 4 INTRODUCTION Regulatory Information CAUTION Trademarks Note, Liability Preface The following are the important cautions described in this manual. Safety Precautions 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS Do not install the scanner on unstable surfaces.
CONTENTS Safety Precautions(4) 1 INTRODUCTION Regulatory Information Trademarks Note, Liability Preface Safety Precautions 1 NAMES AND FUNCTIONS OF PARTS 2 3 4 Before moving the scanner, disconnect the power plug from the power outlet. Do not move the scanner with the power and interface cables connected as this can damage the cables, which can later cause fire, electric shock as well as injury.
CONTENTS 1 NAMES AND FUNCTIONS OF PARTS This chapter describes names and functions of parts. INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 1.1 Names and functions of parts 1.
CONTENTS 1.1 Names and functions of parts 1 2 3 Front view INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 1.1 Names and functions of parts 1.2 Functions of the operator panel 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 8 OPTIONS 9 SCANNER SPECIFICATIONS Appendix No. 1 2 3 4 5 6 Name Function Automatic document feeder(ADF) It transports the document to the reading position automatically.
CONTENTS 1.1 Names and functions of parts(2) 1 2 3 Rear view INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 1.1 Names and functions of parts 1.2 Functions of the operator panel 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 8 OPTIONS 9 SCANNER SPECIFICATIONS Appendix No. Name Function 7 USB Interface connector Used for connecting a USB interface cable from a PC.
CONTENTS 1.1 Names and functions of parts(3) 1 2 3 Removable Parts INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 1.1 Names and functions of parts 1.2 Functions of the operator panel 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 8 OPTIONS 9 SCANNER SPECIFICATIONS Appendix No.
CONTENTS 1.2 Functions of the operator panel INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 1.1 Names and functions of parts 1.2 Functions of the operator panel 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 8 OPTIONS 9 SCANNER SPECIFICATIONS Appendix No. Name Function 1 Function No. display Indicates the function No. and error status.
CONTENTS 2 BASIC SCANNER OPERATION This chapter describes basic scanner operations. INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 2.1 Turning the scanner ON 2.2 Loading Documents on the ADF for Scanning 2.3 Scanning Documents 2.
CONTENTS 2.1 Turning the scanner ON 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 2.1 Turning the scanner ON 2.2 Loading Documents on the ADF for Scanning 2 This section describes how to turn the scanner ON. The following shows the procedure for turning the scanner ON. 1. Press the power button on the operator panel. The scanner is turned ON, and the green LED on the operator panel lights.
CONTENTS 2.1 Turning the scanner ON(2) 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 2.1 Turning the scanner ON 2.2 Loading Documents on the ADF for Scanning 2.3 Scanning Documents 2.
CONTENTS 2.2 Loading Documents on the ADF for Scanning 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 2 3 4 5 6 1. Confirm the following items before loading documents. Confirm that all the documents have the same width. Check the number of sheets in the document stack. The standard number of sheets that can be loaded on the scanner is as follows: ❍ A4-size paper or smaller that makes a document stack of 5mm or less 2.
CONTENTS 2.2 Loading Documents on the ADF for Scanning(2) 1 INTRODUCTION 2 3 4 5 6 3. Load the document on the ADF paper chute. Pull out the ADF paper chute extension according to the length of the document. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS Extension 2.1 Turning the scanner ON 2.2 Loading Documents on the ADF for Scanning 2.3 Scanning Documents 2.
CONTENTS 2.2 Loading Documents on the ADF for Scanning(3) 1 2 3 4 5 6 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS ATTENTION 2 BASIC SCANNER OPERATIONS 2.1 Turning the scanner ON 2.2 Loading Documents on the ADF for Scanning In case of operating with Windows XP OS: When the document is set on the ADF paper chute the following window may appear on the screen. 2.3 Scanning Documents 2.
CONTENTS 2.2 Loading Documents on the ADF for Scanning(4) 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 2.1 Turning the scanner ON 2 3 4 5 6 4. Adjust the side guides to the width of the documents. Move the side guides so that they touch both sides of the documents. If there is any space between the side guides and the edges of documents, the scanned image may be skewed. Side guides 2.2 Loading Documents on the ADF for Scanning 2.3 Scanning Documents 2.
CONTENTS 2.2 Loading Documents on the ADF for Scanning(5) 1 2 3 4 5 6 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS HINT 2 BASIC SCANNER OPERATIONS 2.1 Turning the scanner ON 2.2 Loading Documents on the ADF for Scanning 2.3 Scanning Documents 2.4 How to Use the Scanner Driver The stacker prevents document sheets from dropping after they are scanned. Use the stacker as follows: 1. Lift up the stacker towards you by inserting your fingertips into the handle on the scanner.
CONTENTS 2.2 Loading Documents on the ADF for Scanning(6) 1 INTRODUCTION 2 3 4 5 6 With the movie below, review how to load the document onto the ADF: 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 2.1 Turning the scanner ON 2.2 Loading Documents on the ADF for Scanning 2.3 Scanning Documents 2.
CONTENTS 2.3 Scanning Documents 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 2.1 Turning the scanner ON 2.2 Loading Documents on the ADF for Scanning 2.3 Scanning Documents 2 1. Load the document on the scanner's ADF paper chute. For details on how to load documents, see "2.2 Loading Documents on the ADF for Scanning". 2. Start up ScandAll 21. Select [Start] - [Program] - [Scanner Utility for Microsoft Windows] - [ScandAll 21]. This starts up ScandAll 21. 3.
CONTENTS 2.3 Scanning Documents(2) 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 5. Set the scan resolution, paper size and other scan conditions, and click the [Scan] button. For details on settings in the [TWAIN Driver] dialog box, refer to "2.4 How to Use the Scanner Driver" . 2 BASIC SCANNER OPERATIONS 2.1 Turning the scanner ON 2.2 Loading Documents on the ADF for Scanning 2.3 Scanning Documents 2.
CONTENTS 2.4 How to Use the Scanner Driver 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 2.1 Turning the scanner ON 2.2 Loading Documents on the ADF for Scanning 2.3 Scanning Documents 2.4 How to Use the Scanner Driver 2 3 4 5 6 7 8 9 10 FUJITSU TWAIN32 Scanner Driver FUJITSU TWAIN32 Scanner Driver is designed for scanning documents with FUJITSU image scanner fi series by using application software that complies with the TWAIN standard.
CONTENTS 2.4 How to Use the Scanner Driver(2) 1 2 3 4 5 6 7 8 9 10 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS HINT 2 BASIC SCANNER OPERATIONS 2.1 Turning the scanner ON 2.2 Loading Documents on the ADF for Scanning ScandAll 21 provide scanning methods as follows: ● 2.3 Scanning Documents 2.4 How to Use the Scanner Driver ● ● ● 3 SCANNING VARIOUS TYPES OF DOCUMENTS ● 4 DAILY CARE ● 5 REPLACING CONSUMABLES [To View...]: Displays scanned images on the window. [To File...
CONTENTS 2.4 How to Use the Scanner Driver(3) 1 2 3 4 5 6 7 8 9 10 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 2.1 Turning the scanner ON 2.2 Loading Documents on the ADF for Scanning 2.3 Scanning Documents 2.
CONTENTS 2.4 How to Use the Scanner Driver(4) 1 INTRODUCTION 2 3 4 5 6 7 8 9 10 2. Setting Window for FUJITSU TWAIN32 Scanner Driver 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 2.1 Turning the scanner ON 2.2 Loading Documents on the ADF for Scanning 2.3 Scanning Documents 2.
CONTENTS 2.4 How to Use the Scanner Driver(5) 1 2 3 4 5 6 7 8 9 10 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS Resolution 2.3 Scanning Documents Specifies the resolution of scanning. It can be specified by selecting a default value from the list or customizing (specify any resolution in 1 dpi unit). By marking the [Predefine] checkbox, you can select one from three predefined settings as [Normal], [Fine], [Super Fine] to scan documents instead of setting details by yourself.
CONTENTS 2.4 How to Use the Scanner Driver(6) 1 2 3 4 5 6 7 8 9 10 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 2.1 Turning the scanner ON 2.2 Loading Documents on the ADF for Scanning 2.3 Scanning Documents 2.4 How to Use the Scanner Driver 3 SCANNING VARIOUS TYPES OF DOCUMENTS [Preview] button Documents are scanned preliminarily before the actual scanning. You can confirm the image of the documents in the preview window.
CONTENTS 2.4 How to Use the Scanner Driver(7) 1 2 3 4 5 6 7 8 9 10 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS [Option...] button You can set up the details of optional functions on the window below. 2.1 Turning the scanner ON 2.2 Loading Documents on the ADF for Scanning 2.3 Scanning Documents 2.
CONTENTS 2.4 How to Use the Scanner Driver(8) 1 2 3 4 5 6 7 8 9 10 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 2.1 Turning the scanner ON 2.2 Loading Documents on the ADF for Scanning 2.3 Scanning Documents 2.4 How to Use the Scanner Driver 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 8 OPTIONS 9 SCANNER SPECIFICATIONS Appendix [Advance...
CONTENTS 2.4 How to Use the Scanner Driver(9) 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 2.1 Turning the scanner ON 2.2 Loading Documents on the ADF for Scanning 2.3 Scanning Documents 2.
CONTENTS 2.4 How to Use the Scanner Driver(10) 10 INTRODUCTION 11 12 13 14 15 16 Select the profile for scanning. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 2.1 Turning the scanner ON 2.2 Loading Documents on the ADF for Scanning 2.3 Scanning Documents 2.
CONTENTS 2.4 How to Use the Scanner Driver(11) 10 INTRODUCTION 11 12 13 14 15 16 Configure settings for scanning and click the [OK] button. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 2.1 Turning the scanner ON 2.2 Loading Documents on the ADF for Scanning 2.3 Scanning Documents 2.
CONTENTS 2.4 How to Use the Scanner Driver(12) 10 INTRODUCTION 11 12 13 14 15 16 2. Configuration Window of FUJITSU ISIS Scanner Driver 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 2.1 Turning the scanner ON 2.2 Loading Documents on the ADF for Scanning 2.3 Scanning Documents 2.
CONTENTS 2.4 How to Use the Scanner Driver(13) 10 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 11 12 2.3 Scanning Documents This setting is suitable for scanning dark photographs. Dither Pattern 1 This setting is suitable for scanning dark-colored documents containing both text and photographs. Dither Pattern 2 This setting is suitable for scanning light photographs.
CONTENTS 2.4 How to Use the Scanner Driver(14) 10 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 11 12 13 14 15 16 Scan Type Selects the scanning method 2 BASIC SCANNER OPERATIONS 2.1 Turning the scanner ON ADF (Front Side) Scans only the front sides of documents. 2.2 Loading Documents on the ADF for Scanning ADF (Back Side) Scans only back sides of documents. ADF (Duplex) Scans both front and the back sides of documents.
CONTENTS 2.4 How to Use the Scanner Driver(15) 10 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 2.1 Turning the scanner ON 11 12 13 14 15 16 [Area...] button Opens the Scan Area dialog box. Specify scan area for the document size. The size can be set by dragging the frame with mouse. Otherwise, enter any value for the setting. 2.2 Loading Documents on the ADF for Scanning 2.3 Scanning Documents 2.
CONTENTS 2.4 How to Use the Scanner Driver(16) 10 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 11 12 13 14 15 16 [More...] button Opens [More Settings] window. Used for setting advanced features. 2 BASIC SCANNER OPERATIONS 2.1 Turning the scanner ON 2.2 Loading Documents on the ADF for Scanning 2.3 Scanning Documents 2.
CONTENTS 3 SCANNING VARIOUS TYPES OF DOCUMENTS This chapter describes how to scan various types of documents. INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning Double Sided Documents 3.2 Scanning Different-width Documents 3.3 Scanning Documents longer than A4 size 3.4 Saving Scanned Images in PDF Format 3.5 Excluding a Color in the Image (dropout color) 3.6 Skipping blank pages 3.
CONTENTS 3.1 Scanning Double Sided Documents 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 2 3 The following shows the procedure for reading the double sided documents. 1. Load the document on the ADF paper chute. For details on how to load documents, see "2.2 Loading Documents on the ADF for Scanning". 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning Double Sided Documents 3.2 Scanning Different-width Documents 3.3 Scanning Documents longer than A4 size 3.
CONTENTS 3.1 Scanning Double Sided Documents(2) 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 2 3 3. Start up ScandAll 21. From [Start] menu, select [Program] - [Scanner Utility for Microsoft Windows] - [ScandAll 21]. This starts up ScandAll 21. 4. Select [Select Source] from the [Scan] menu. 5. Select [FUJITSU fi-5110Cdj] and then click the [Select] button. 3.1 Scanning Double Sided Documents 3.2 Scanning Different-width Documents 6.
CONTENTS 3.1 Scanning Double Sided Documents(3) 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 3 7. Click the [Scan] button. For [TWAIN Driver] dialog box setting, refer to "2.4 How to Use the Scanner Driver". 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning Double Sided Documents 3.2 Scanning Different-width Documents 3.3 Scanning Documents longer than A4 size 3.4 Saving Scanned Images in PDF Format 3.5 Excluding a Color in the Image (dropout color) 3.
CONTENTS INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning Double Sided Documents 3.2 Scanning Different-width Documents 3.3 Scanning Documents longer than A4 size 3.4 Saving Scanned Images in PDF Format 3.5 Excluding a Color in the Image (dropout color) 3.6 Skipping blank pages 3.
CONTENTS 3.3 Scanning Documents longer than A4 size 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 3 1. Load the documents on the ADF paper chute. For details on loading documents, refer to "2.2 Loading Documents on the ADF for Scanning". 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning Double Sided Documents 3.2 Scanning Different-width Documents 3.3 Scanning Documents longer than A4 size 3.
CONTENTS 3.3 Scanning Documents longer than A4 size(2) 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 2 3 3. Start up ScandAll 21. For starting up ScandAll 21, select [Programs] - [Scanner Utility for Microsoft Windows] - [ScandAll 21] from [Start]. 4. Select [Select Source] from the [Scan] menu. 5. Select [FUJITSU fi-5110Cdj] and then click the [Select] button. 3.1 Scanning Double Sided Documents 3.2 Scanning Different-width Documents 3.
CONTENTS 3.3 Scanning Documents longer than A4 size(3) 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 3 8. Click the [Scan] button. For settings in the [TWAIN Driver] dialogbox, refer to "2.4 How to Use the Scanner Driver". 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning Double Sided Documents 3.2 Scanning Different-width Documents 3.3 Scanning Documents longer than A4 size 3.4 Saving Scanned Images in PDF Format 3.5 Excluding a Color in the Image (dropout color) 3.
CONTENTS 3.4 Saving Scanned Images in PDF Format 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning Double Sided Documents 3.5 Excluding a Color in the Image (dropout color) 3.6 Skipping blank pages 3.7 Detecting Multi Feeds 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 8 OPTIONS 9 SCANNER SPECIFICATIONS Appendix 5 6 7 1.
CONTENTS 3.4 Saving Scanned Images in PDF Format(2) 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 3 4 5 6 7 Using ScandAll 21 1. Load the documents on the ADF paper chute. 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning Double Sided Documents 3.2 Scanning Different-width Documents 2. Start up ScandAll 21. From [Start] menu, select [Program] - [Scanner Utility for Microsoft Windows] [ScandAll 21]. This starts up ScandAll 21. 3.
CONTENTS 3.4 Saving Scanned Images in PDF Format(3) 1 INTRODUCTION 2 3 4 5 6 7 4. Select the scan resolution, document size and other scan conditions, and then click the [Scan] button. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning Double Sided Documents 3.2 Scanning Different-width Documents 3.3 Scanning Documents longer than A4 size 3.4 Saving Scanned Images in PDF Format 3.5 Excluding a Color in the Image (dropout color) 3.
CONTENTS 3.4 Saving Scanned Images in PDF Format(4) 1 INTRODUCTION 2 3 4 5 6 7 Using Adobe Acrobat 6.0 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS ATTENTION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning Double Sided Documents 3.2 Scanning Different-width Documents Usage note for Adobe Acrobat 6.0 ● 3.3 Scanning Documents longer than A4 size 3.4 Saving Scanned Images in PDF Format 3.
CONTENTS 3.4 Saving Scanned Images in PDF Format(5) 1 INTRODUCTION 2 3 4 5 6 7 5. Select the scan resolution, document size and other scan conditions, and click the [Scan] button. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning Double Sided Documents 3.2 Scanning Different-width Documents 3.3 Scanning Documents longer than A4 size 3.4 Saving Scanned Images in PDF Format 3.5 Excluding a Color in the Image (dropout color) 3.
CONTENTS 3.4 Saving Scanned Images in PDF Format(6) 1 INTRODUCTION 2 3 4 5 6 7 7. Select [Save as...] or [Save] from [File] menu to save the scanned image. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning Double Sided Documents 3.2 Scanning Different-width Documents 3.3 Scanning Documents longer than A4 size 3.4 Saving Scanned Images in PDF Format 3.5 Excluding a Color in the Image (dropout color) For the details on Adobe Acrobat 6.
CONTENTS 3.4 Saving Scanned Images in PDF Format(7) 1 2 3 4 5 6 7 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS HINT(Continued from the previous page) 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 5. Select one from [Default Settings]. The following shows an example of [Standard]. 3.1 Scanning Double Sided Documents 3.2 Scanning Different-width Documents 3.3 Scanning Documents longer than A4 size 3.4 Saving Scanned Images in PDF Format 3.
CONTENTS INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 3.5 Excluding a Color in the Image (dropout color) A selected color (primary colors: red, green or blue) can be removed (dropped out) from the scanned image data. For example, if the document contains black text in a green frame, you can set the scanner to read only the text and eliminate (drop out) the green frame. To set the scanner to drop out a color, change the settings in the [TWAIN Driver] dialogbox before scanning. 1. Click the [Advance...
CONTENTS 3.6 Skipping blank pages 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 Change settings in the [TWAIN Driver] dialog box for skipping blank pages at scanning documents. 1. Click [Option] button in the [TWAIN Driver] dialog box. 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning Double Sided Documents 3.2 Scanning Different-width Documents 3.3 Scanning Documents longer than A4 size 3.4 Saving Scanned Images in PDF Format 3.
CONTENTS 3.6 Skipping blank pages(2) 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 4. With the slider control under [Blank Page Skip], specify the Blank Page Skip degree. 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning Double Sided Documents 3.2 Scanning Different-width Documents 3.5 Excluding a Color in the Image (dropout color) For white pages, use the [Black Dots Ratio] slider bar to set the skip condition.
CONTENTS 3.7 Detecting Multi Feeds 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 2 "Multi feed" is a feeding error that occurs when two or more sheets in the ADF paper chute are fed simultaneously into the scanner. You can set the scanner to detect multi feed, stop scanner operation, and display an error message. To set the scanner to detect multi feed, change the settings in the [TWAIN Driver] dialog box. 1. Click the [Option...] button in the [TWAIN Driver] dialog box.
CONTENTS 3.7 Detecting Multi Feeds(2) 1 INTRODUCTION 2 3. Select the detection conditions from "Multi Feed Detection" under "ADF Option". 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning Double Sided Documents 3.2 Scanning Different-width Documents 3.3 Scanning Documents longer than A4 size 3.4 Saving Scanned Images in PDF Format 3.5 Excluding a Color in the Image (dropout color) 3.6 Skipping blank pages 3.
CONTENTS 4 DAILY CARE This chapter describes how to clean the scanner. CAUTION INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 4.1 Cleaning Materials 4.2 Cleaning the Scanner Exterior 4.3 Cleaning the Inside of the Scanner 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 8 OPTIONS 9 SCANNER SPECIFICATIONS Appendix When operating the scanner, the ADF's glass becomes very hot.
CONTENTS 4.1 Cleaning Materials The table below shows the cleaning materials that are used on this scanner. Cleaning Materials Part No. Remarks INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS Cleaner F1 (or isopropyl alcohol) CA99501-0013 1 bottle (100 ml) Moisten cloth with this fluid and wipe the scanner clean. Lint-free dry cloth Commercially available. Any lint-free cloth can be used. 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 4.1 Cleaning Materials 4.
CONTENTS 4.2 Cleaning the Scanner Exterior Clean the scanner exterior, the ADF paper chute and the Stacker with a cloth moistened with a small amount of Cleaner F1 or any neutral detergent INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS ATTENTION 2 BASIC SCANNER OPERATIONS ● 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 4.1 Cleaning Materials 4.2 Cleaning the Scanner Exterior 4.
CONTENTS 4.3 Cleaning the Inside of the Scanner 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 2 3 4 5 Clean inside of the scanner with a cloth moistened with Cleaner F1. In an alternating succession of scanning documents, the accumulated paper-powder and dust inside the scanner causes a scanning error. As a guideline, clean the ADF every 1,000 scans.
CONTENTS 4.3 Cleaning the Inside of the Scanner (2) 1 2 3 4 5 1. Open the ADF by pulling the ADF open lever. INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS CAUTION Be careful, the ADF may close and pinch your finger. 4 DAILY CARE 4.1 Cleaning Materials 4.2 Cleaning the Scanner Exterior 2. Clean the following locations with a cloth moistened with cleaner F1. 4.
CONTENTS 4.3 Cleaning the Inside of the Scanner (3) 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 3 4 5 Turn off the scanner before cleaning the following locations. ● Pad ASSY (x 1) Wipe the Pad ASSY (rubber surface) downwards. When cleaning the Pad ASSY, take care to prevent the cloth from catching on the metallic parts. 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS Metallic parts 4 DAILY CARE 4.1 Cleaning Materials 4.
1 2 3 4 5
CONTENTS 4.3 Cleaning the Inside of the Scanner (4) 1 2 3 4 5 Turn on the scanner before cleaning the following locations. INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE ● Feed rollers (x 4) Clean lightly taking care not to roughen the surface of the rollers. Take particular care in cleaning the feed rollers since black debris on the rollers adversely affect the pickup performance. 1.
CONTENTS 4.3 Cleaning the Inside of the Scanner (5) 1 2 3 4 5 With the movie below, review the procedure to clean the Feed Rollers: INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 4.1 Cleaning Materials 4.2 Cleaning the Scanner Exterior 4.3 Cleaning the Inside of the Scanner 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 8 OPTIONS 3. Close the ADF.
CONTENTS 5 REPLACING CONSUMABLES This chapter describes how to replace scanner consumables. INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS In this chapter Windows XP screenshots are illustrated. The screens and operations may differ slightly if the OS that you are using is not Windows XP. Also, when FUJITSU TWAIN32 or FUJITSU ISIS is updated the screens and operations noted in this chapter will differ slightly.
CONTENTS 5.1 Consumable and Replacement Cycle 1 2 3 4 5 The following table shows the specifications of consumables and their standard replacement cycle. INTRODUCTION Description 1 NAMES AND FUNCTIONS OF PARTS PAD ASSY Parts Number Standard Replacement Cycle PA03360-0002 After 50,000 scans or one year. PA03360-0001 100,000 scans or one year. 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 5.1 Consumable and Replacement Cycle 5.
CONTENTS 5.1 Consumable and Replacement Cycle (2) 1 2 3 4 5 Guidelines for Consumable Replacement Cycle INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE With this product, you can learn how many times the consumables are used so that you can estimate the right timing for the replacement. 1. When turning on the power, check that the scanner is connected to the PC. Refer to "2.
CONTENTS 5.1 Consumable and Replacement Cycle (3) 1 INTRODUCTION 2 3 4 5 4. On "fi-5110Cdj" icon, right click and select [Properties] (for Windows Me, Windows XP), or double click (for Windows 98, Windows 2000). 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 5.1 Consumable and Replacement Cycle 5.2 Replacing the Pad ASSY 5.
CONTENTS 5.1 Consumable and Replacement Cycle (4) 1 INTRODUCTION 2 3 4 5 5. Click the "Device Set" tab. The following screen is displayed. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 5.1 Consumable and Replacement Cycle 5.2 Replacing the Pad ASSY 5.
CONTENTS 5.1 Consumable and Replacement Cycle (5) 1 2 3 4 5 The following message may appear while you use the scanner: INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 5.1 Consumable and Replacement Cycle 5.2 Replacing the Pad ASSY 5.
CONTENTS 5.2 Replacing the Pad ASSY 1 2 1. Remove any documents on the ADF Paper Chute. INTRODUCTION 2. Open the ADF by pulling the ADF Open Lever. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS CAUTION 4 DAILY CARE Be careful, the ADF may close and pinch your finger. 5 REPLACING CONSUMABLES 5.1 Consumable and Replacement Cycle 5.2 Replacing the Pad ASSY 5.3 Replacing the Pick Roller 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 3.
CONTENTS 5.2 Replacing the Pad ASSY (2) 1 2 6. Reset the Pad Counter. INTRODUCTION When turning on the power, check that the scanner is connected to your PC. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE Open the [Scanners and Cameras] from the [Control Panel] of your PC. Open the [Properties] of [fi-5110Cdj] from the [Scanners and Cameras]. The [fi-5110Cdj Properties] dialogbox appears. Click the "Device Set" tab.
CONTENTS 5.3 Replacing the Pick Roller 1 2 3 1. Remove any documents on the ADF Paper Chute. INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 2. Remove the ADF paper chute. 3. Open the ADF by pulling the ADF Open Lever. 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE Caution 5 REPLACING CONSUMABLES 5.1 Consumable and Replacement Cycle 5.2 Replacing the Pad ASSY 5.
Caution If you push up the pick roller tab using your fingernail, it may hurt or get chipped your fingernail. If you worry about that, push up the pick roller tab using a paper clip.
CONTENTS 5.3 Replacing the Pick Roller (2) 1 2 3 8. Attach the new pick roller to the shaft. INTRODUCTION Insert the new pick roller aligning the protrusion with the slot on the pick roller. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS : Pick Roller Shaft 4 DAILY CARE : Protusion 5 REPLACING CONSUMABLES : Pick Roller 5.1 Consumable and Replacement Cycle 5.2 Replacing the Pad ASSY 5.
With the movie below, review the replacement procedure of the Pick Roller.
CONTENTS 5.3 Replacing the Pick Roller(3) 1 2 3 14. Reset the pick counter. INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS When turning on the power, check that the scanner is connected to your PC. Open the [Scanners and Cameras] from the [Control Panel] of your PC. Open the [Properties] of [fi-5110Cdj] from the [Scanners and Cameras]. The [Properties of fi-5110Cdj] dialogbox is displayed.
CONTENTS 6 TROUBLESHOOTING This chapter describes how to remedy document jams, other trouble, items to check before contacting the agent where you bought the scanner, and how to check device labels. INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS ATTENTION 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 6.1 Removing Jammed Documents 6.2 Error Indications in the Operator Panel 6.3 Remedying Typical Troubles 6.
CONTENTS 6.1 Removing Jammed Documents 1 INTRODUCTION 2 3 If a document jam occured, follow the procedure below to remove the jammed documents. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS CAUTION 3 SCANNING VARIOUS TYPES OF DOCUMENTS ● 4 DAILY CARE ● 5 REPLACING CONSUMABLES ● 6 TROUBLESHOOTING 6.1 Removing Jammed Documents Take care not to get injured when removing jammed documents. Be careful not to get neckties, necklaces, etc.
1 2 3
CONTENTS 6.1 Removing Jammed Documents(2) 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 3 If a document jam or Multi Feed errors occur frequenlty, follow the procedures below . 1. Align the edges of the document sheets. 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 6.1 Removing Jammed Documents 6.2 Error Indications in the Operator Panel 6.3 Remedying Typical Troubles 6.
CONTENTS 6.1 Removing Jammed Documents(3) 1 INTRODUCTION 2 3 4. Load the documents into the ADF chute, as shown in the picture. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 6.1 Removing Jammed Documents 6.2 Error Indications in the Operator Panel 6.3 Remedying Typical Troubles 6.4 Items to Check Before Contacting the Agent Where You Bought the Scanner 6.
CONTENTS 6.2 Error Indications in the Operator Panel 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 2 When any error occurrs, the operator panel indicates "U" followed by a number for temporary errors or "E" followed by a number for device alarms (permanent error). Temporary errors can be resolved by the operator, but the device alarm requires recovery works by support engineers.
CONTENTS 6.2 Error Indications in the Operator Panel (2) 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 Device alarms: A number appearing in alternation following the "E" refers to the following type of device alarms: 2 BASIC SCANNER OPERATIONS Indication Meaning E2 Trouble in the optical system (front). E3 Trouble in the optical system (back). E4 The motor fuse has blown out. E6 Trouble with the Operator Panel. 6.
CONTENTS INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 6.3 Remedying Typical Troubles This section describes troubles that may occur during scanning and how to remedy that trouble. Before you ask for repair, check the following flowcharts. If the remedies in these flowcharts do not solve the problem, check the items in "6.
CONTENTS Symptom 1 : Scanner cannot be turned ON. Back INTRODUCTION Are power cable and AC adapter No 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS Correctly connect power cable. correctly connected? Yes 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES You must use the AC adapter and cable supplied with your scanner by the manufacturer.
CONTENTS Symptom 2F@Indication on Function No. display goes out. Back Does the display remain blank even INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS after you push any button on the operator panel? The scanner operation is normal. No Yes 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE Does the display remain blank even after trunning ON the scanner again? No 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING Yes 6.1 Removing Jammed Documents 6.
CONTENTS Symptom 3 : The scanning does not start. Back INTRODUCTION chute. the ADF paper chute? No 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS Load document correctly on ADF paper Is the document loaded correctly on Yes 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE No 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING Close the ADF completely. Is the ADF closed completely? Yes 6.1 Removing Jammed Documents 6.2 Error Indications in the Operator Panel 6.
CONTENTS Symptom 4 : Quality of scanned pictures or photos is not satisfactory. Back INTRODUCTION No 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS Select halftoning or dithering on your PC. Did you select halftoning or dithering? Yes 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE Are the upper/lower glasses inside the ADF clean? No 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING Yes 6.1 Removing Jammed Documents 6.2 Error Indications in the Operator Panel 6.
CONTENTS Symptom 5 : Quality of scanned text or lines is unsatisfactory. Back INTRODUCTION Are the upper/lower glasses inside the ADF clean? No 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES Yes If you cannot solve the problem after taking measures, check the items in "6.4 Items to Check Before Contacting the Agent Where You Bought the 6 TROUBLESHOOTING 6.1 Removing Jammed Documents 6.
CONTENTS Symptom 6 : Images are distorted or blurred. Back INTRODUCTION Are the upper/lower glasses inside the ADF clean? No 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING Clean dirty locations. For details on how to clean dirty locations, see "Chapter 4 DAILY CARE".
CONTENTS Symptom 7 : Vertical lines appear in the scanned image. Back INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS Clean the upper/lower glasses inside the ADF. For cleaning the glass, refer to "4.3 Do the lines appear on the same part of images? Yes Cleaning the Inside of the Scanner". 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES No Scan the documents with low resolution settings.
CONTENTS Symptom 8 : The Function No. display indicates alarm after the scanner is turned ON. Back INTRODUCTION Does the Function No. display indicate 1 NAMES AND FUNCTIONS OF PARTS any alarm after turning ON the scanner again? 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING Yes If you cannot solve the problem after taking measures, check the items in "6.4 Items to Check Before Contacting the Agent Where You Bought the 6.
CONTENTS Symptom 9 : Multi feed errors occur frequently. Back INTRODUCTION Do the documents satisfy the conditions described in "7.2 Document 1 NAMES AND FUNCTIONS OF PARTS Quality"? Use documents that satisfy the requirements. For details on requirements, see "7.2 No Document Quality". 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 6.1 Removing Jammed Documents 6.
If you cannot solve the problem after taking measures, check the items in "6.4 Items to Check Before Contacting the Agent Where You Bought the Scanner" and contact the dealer or an authorized FUJITSU service provider.
CONTENTS Symptom 10 : Pickup errors occur frequently. Back Use documents that satisfy the requirements. For details on requirements, see "7.2 Do the documents satisfy the INTRODUCTION conditions described on "7.2 Document 1 NAMES AND FUNCTIONS OF PARTS Quality"? No Document Quality".
CONTENTS Symptom 11 : Paper jams occur frequently Back INTRODUCTION Do the documents satisfy the conditions described in "7.2 Document 1 NAMES AND FUNCTIONS OF PARTS Quality"? Use the document that satisfy the requirements. For details on requirements, see "7.2 No Document Quality". 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS Yes Clean the ADF or remove debris from 4 DAILY CARE 5 REPLACING CONSUMABLES Is there any debris in the ADF? 6 TROUBLESHOOTING Yes Scanner" . 6.
CONTENTS Symptom 12 : The scanned images are elongated Back INTRODUCTION Clean all the rollers. For details on how to clean the rollers, see "4.3 Cleaning the Inside of the Have you cleaned all the rollers? 1 NAMES AND FUNCTIONS OF PARTS No Scanner". 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS Yes Check the items in "6.4 Items to Check 4 DAILY CARE Before Contacting the Agent Where 5 REPLACING CONSUMABLES Have you adjusted the scan scale? 6 TROUBLESHOOTING Yes 6.
CONTENTS Symptom 13 There is a shadow on the top and bottom edge of the scanned images. Back Check the items in "6.4 Items to Check INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS Did you adjust the offset (starting 2 BASIC SCANNER OPERATIONS position for scanning the document)? No 4 DAILY CARE 6 TROUBLESHOOTING 6.1 Removing Jammed Documents 6.2 Error Indications in the Operator Panel 6.3 Remedying Typical Troubles 6.4 Items to Check Before Contacting the Agent Where You Bought the Scanner 6.
CONTENTS 6.4 Items to Check Before Contacting the Agent Where You Bought the Scanner INTRODUCTION If you cannot solve the problem after checking the remedies in the Trouble shooting table, contact the dealer where you bought the scanner or an authorized FUJITSU scanner service provider. Before you ask for repair service, please collect the following information.
Items to check before contacting the dealer where you bought the scanner Check the following items before you contact the dealer where you bought the scanner. PRINT General Details Meaning Findings Model fi-5110C Serial No. (*) (Example) 000001 Production date (*) (Example) 2004-08 (August, 2004) Date of purchase January 1 , 2004 Symptom Frequency of trouble Total Page Count(ADF) (**) *Please confirm the necessary information in the product label. (Refer to 6.
Feed system trouble Meaning Findings Document type Main purpose of use Last cleaning date Value of Consumable counter (Example) Pick roller set counter XXX Displayed sign or number on the Operator panel at trouble Imaging system trouble Meaning Findings Type and version of scanner driver Type of interface controller OS (Windows) (Example) made by Adaptec SCSI Card 2940AU Windows XP Application software (Example) ScandAll 21, Acrobat Others Meaning Findings Can you send us both the original docum
CONTENTS 6.5 Checking Labels on the Scanner The following illustrations are samples of the product labels of fi-5110C Image Scanner. INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 6.1 Removing Jammed Documents 6.2 Error Indications in the Operator Panel 6.3 Remedying Typical Troubles 6.4 Items to Check Before Contacting the Agent Where You Bought the Scanner 6.
CONTENTS 7 DOCUMENT SPECIFICATIONS FOR ADF This chapter describes the required document size and paper quality for ensuring correct operation when scanning documents on the ADF. INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 7.1 Document Size 7.2 Document Quality 7.3 Maximum Document Loading Capacity 7.4 Area not to be perforated 7.
CONTENTS 7.1 Document Size The following shows the size of documents that can be scanned on the ADF. INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 7.1 Document Size 7.2 Document Quality 7.3 Maximum Document Loading Capacity 7.4 Area not to be perforated 7.5 Multi feed Detection Conditions 8 OPTIONS 9 SCANNER SPECIFICATIONS Appendix Maximum A 216 (8.
CONTENTS 7.2 Document Quality 1 2 Document Type INTRODUCTION The following paper types are recommended for document use: 1 NAMES AND FUNCTIONS OF PARTS ● 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 7.
CONTENTS 7.2 Document Quality(2) 1 2 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS HINT 2 BASIC SCANNER OPERATIONS ● 3 SCANNING VARIOUS TYPES OF DOCUMENTS ● 4 DAILY CARE When scanning semi-transparent documents, slide the [Brightness] bar to "light" to avoid bleed through. To prevent the rollers from becoming dirty, avoid scanning documents containing large areas written or filled in pencil. If scanning of such documents is unavoidable, clean the rollers frequently.
CONTENTS 7.3 Maximum Document Loading Capacity The maximum number of sheets that can be loaded on the ADF paper chute is determined by the size and weight of the document. The following graph shows the maximum document loading capacity of ADF according to paper weight. INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 7.1 Document Size 7.2 Document Quality 7.
CONTENTS 7.4 Area not to be perforated Document trouble might occur if there are punched holes in the shaded area in the following figure. INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 7.1 Document Size 7.2 Document Quality 7.3 Maximum Document Loading Capacity 7.4 Area not to be perforated 7.
CONTENTS 7.5 Multi feed Detection Conditions 1 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 2 There are three multi feed detection modes: document thickness, document length, and both document thickness and length. The following conditions must be satisfied in each of these detection modes. Detection by Document Thickness Sheets of the same thickness shall be set in the ADF at a time.
CONTENTS 7.5 Multi feed Detection Conditions(2) 1 2 INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS HINT 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS The type of document and document conditions sometimes cause the multi feed detection rate to drop. 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 7.1 Document Size 7.2 Document Quality 7.3 Maximum Document Loading Capacity 7.4 Area not to be perforated 7.
CONTENTS 8 OPTIONS This chapter describes the options (sold separately) for fi-5110C Image Scanner. INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 8 OPTIONS 8.
8.1 Image Processing Software Option CONTENTS fi-5110C Image Scanner option. No. INTRODUCTION 1 Name Image Processing Software Option Spec PA43400-D72201 Description For image processing (Binarizaiton) 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 8 OPTIONS 8.
CONTENTS 9 SCANNER SPECIFICATIONS This chapter lists the scanner specifications. INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 8 OPTIONS 9 SCANNER SPECIFICATIONS 9.1 Basic Specifications 9.2 Installation Specifications 9.
CONTENTS 9.1 Basic Specifications 1 No. INTRODUCTION 2 Items Specification Remarks 1 NAMES AND FUNCTIONS OF PARTS 1 Scanner Type ADF (Automatic Document Feeder) - 2 BASIC SCANNER OPERATIONS 2 Image sensor CCD x 2 Front / Back 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3 Light source White cold cathode fluorescent lamp x 2 Front / Back 4 Scanning area A8 size (Portrait) ADF 127g/ m2 paper A4 / Legal size Long page scanning : 216 x 864mm (8.
CONTENTS 9.1 Basic Specifications(2) 1 No.
CONTENTS 9.2 Installation Specifications 1 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS Dimensions (mm) (Without ADF paper chute and Stacker) Installation Space (mm) 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING Weight (kg) Input power 7 DOCUMENT SPECIFICATIONS FOR ADF 8 OPTIONS 9 SCANNER SPECIFICATIONS Specification Items INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 Power consumption Depth Width Height 166 (6.54 in) 293.5 (11.55 in) 130 (5.
CONTENTS 9.2 Installation Specifications(2) 1 2 Items INTRODUCTION Ambient condition Specification Device status Operating Not operating Temperature 5 to 35 °C (41 to 95°F) -20 to 60 °C (-4 to 140°F) Humidity 20 to 80 % 8 to 95 % 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES Heat capacity 24.1 kcal / H or less Shipping Weight (kg) 4.5 (9.
CONTENTS 9.3 External Dimensions The following shows the external dimensions of the fi-5110C: INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 8 OPTIONS 9 SCANNER SPECIFICATIONS 9.1 Basic Specifications 9.2 Installation Specifications 9.
CONTENTS Appendix The Appendix is structured as follows: Appendix 1 Before using [Scan] button and [Send to] button Appendix 2 Glossary INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 8 OPTIONS 9 SCANNER SPECIFICATIONS Appendix Appendix 1 Before using "Scan" button and "Send to" button Appendix 2 Glossary
CONTENTS Appendix 1 Before using [Scan] button and [Send to] button 1 INTRODUCTION 2 By setting the link of the application software to the [ Scan ] button and [ Send to ] button, you can launch the linked application by simply pushing the button. 1 NAMES AND FUNCTIONS OF PARTS 1. Select [ Control panel ] from the [ Start ] menu. 2 BASIC SCANNER OPERATIONS 2. Select [ Properties ] from [ Scanner & Cameras ]. 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3. Select the [ Event ] tab. 4. Select an event.
CONTENTS Appendix 1 Before using [Scan] button and [Send to] button (2) 1 INTRODUCTION 2 5. Select the application with its process, excuted by the event. For Windows XP, click [Start this program] under [Actions] and select the application and process from the menu.
