CANON FAX – L360 SOFTWARE MANUAL
MP330.book Page 2 Thursday, January 31, 2002 11:39 AM Before You Begin the Installation: a Checklist 2 To ensure a smooth and successful installation, take some time before you begin to plan and prepare for the installation process. ❏ Do not connect. Do not connect the printer cable to the port on your computer at this time. When you begin the installation of the software, the installation program will prompt you when it is appropriate to connect the printer to your computer.
If your current printer purchase is replacing a MultiPASS printer, you must remove the MultiPASS software installed on your system before installing the new printer. For instructions on removing the MultiPASS software, see the software user’s guide that came with your MultiPASS software. Installing the Software 2 You are ready to install the software once you have prepared your system, as described in the “Before You Begin the Installation: a Checklist” section.
MP330.book Page 4 Thursday, January 31, 2002 11:39 AM If installation does not start automatically: • On the Windows desktop, click Start, and then click Run. • In the Run dialog box, type the following command and click OK (where D: is your disk drive containing the installation disk). D:\SETUP\SETUP.EXE 3. Follow the on-screen instructions to complete the installation process. During installation, follow these guidelines: 4. • Click Next to move from one dialog box to the next.
MP330.book Page 5 Thursday, January 31, 2002 11:39 AM The system displays messages indicating that the driver for your printer is being installed. For Windows 98/Me: Wait for the system to complete the installation of the printer driver. For Windows 2000/XP: See Step 6. 6.
MP330.book Page 6 Thursday, January 31, 2002 11:39 AM For Windows XP • 7. Select Install the software automatically (Recommended). When the setup is finished, if prompted, restart Windows. The installation program determines whether Windows needs to be restarted on your system. Setting the Default Printer 2 When you install the printer driver software, the system automatically sets the printer as the default printer. If necessary, however, follow these instructions to set the default printer.
MP330.book Page 7 Thursday, January 31, 2002 11:39 AM To use your printer, the client systems must have the printer driver software installed on them. The software can be installed on the client systems directly from your system.
MP330.book Page 8 Thursday, January 31, 2002 11:39 AM 5. In the Share Name box (Windows 98/Me/XP) or Shared As box (Windows 2000), type a name you want to assign to the shared printer. If available, you may also want to assign a password, which would then be required by the client system when using the printer. 6. If your situation matches the following, set up an alternate driver: • Windows 2000/XP server system sharing with Windows 98/Me client systems.
MP330.book Page 9 Thursday, January 31, 2002 11:39 AM Removing the Printer Driver 2 To remove the printer driver: 1. On the Windows desktop, click Start, point to Settings, and then click Control Panel (in Windows XP, click Start, and then click Control Panel). 2. In Control Panel, double-click Add/Remove Programs (in Windows XP, click Add or Remove Programs). 3.