Series Printer Guide before operating this equipment. this guide, store it in a safe place for future reference.
About the Manuals for the Machine The manuals for this machine are divided as follows. Please read them to suit your needs. For Basic Use ................................................ Troubleshooting ............................................. Reference Guide For Basic Copying ........................................... For Convenient Copying .................................... Copying Guide For Basic Mail Box Function Use ......................... For Convenient Mail Box Function Use ............
How This Manual Is Organized Chap 1 Before You Start Using the Machine Chap 2 Menu Functions and Operation 2 Chap 3 Printer Settings Menu Functions and Operation 3 Chap 4 Report Settings Menu 4 Chap 5 Troubleshooting 5 Chap 6 Appendix 6 Please read this chapter first Contains the Index and Appendix. • Considerable effort has been made to make sure that this manual is free of inaccuracies and omissions.
PREFACE Thank you for purchasing the Canon Network Multi-PDL Printer Kit-C1/C2. This manual describes the additional functionality this kit provides for an iR3300/2800/2200 Series machine, and how to specify these functions from the touch panel display. Please read this manual thoroughly before using the Network Multi-PDL Printer Kit-C1/C2 with an iR3300/2800/2200 Series machine in order to familiarise yourself with the added capabilities, and to make the most of the functions.
About Trademarks License Notice Universal Font Scaling Technology, UFST, is licensed from Agfa Monotype Corporation. Copyright © 1993-2000 Agfa Monotype Corporation. Trademark Credits Adobe, PostScript, and PostScript 3 are trademarks of Adobe Systems Incorporated. Agfa is a trademark of Agfa-Gevaert AG and may be registered in some jurisdictions. Apple, Macintosh and TrueType are trademarks of Apple Computer, Inc. Albertus, Arial and Times New Roman are trademarks of The Monotype Corporation Plc.
Safety Information 1. Laser Safety This Product is certified as a Class 1 laser product under EN60825-1:1994. This means that the product does not produce hazardous laser radiation. Since radiation emitted inside the product is completely confined within protective housings and external covers, the laser beam can not escape from the machine during any phase of user operation. 2.
Table of Contents How This Manual Is Organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i PREFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii About Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii License Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Trademark Credits . . . . .
Chapter 3 Printer Settings Menu Functions and Operation Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 2-Sided Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Paper Feed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 4 Report Settings Menu PCL Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2 Configuration Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2 Font List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2 PS Menu (Printer Kit-C1 Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3 Configuration Page .
How to Use This Manual Symbols Used in This Manual The following symbols are used in this manual, for explanations of procedures and restrictions, handling cautions, and instructions that should be observed for safety. WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. In order to use the machine safely, always pay attention to these warnings.
Displays Used in This Manual Screenshots of the touch panel display used in this manual are those taken when the Finisher-J1, Cassette Feeding Unit-W1, Feeder (DADF-H1), Printer Kit, and Network Interface Adapter are attached to the iR3300. Note that functions that cannot be used depending on the model or options, are not displayed on the touch panel display. The keys which you should press are marked with , as shown below. When multiple keys can be pressed on the touch panel display, all keys are marked.
Operation of the Machine and Terms Used in This Manual This machine makes effective use of memory in order to perform print operations efficiently. For example, as soon as the machine has scanned the original that you want to copy, it can immediately scan the next person’s original. You can also print from this machine, using a function other than the Copy function.
What the Machine Can Do Additional Functions Screen Additional Functions Press to open the Additional Functions screen. The Printer Settings or the Report Settings can be accessed from this screen. Report Settings Printer Settings In the Additional Functions screen, press [Printer Settings] to open the Custom Priting Settings menu. Utility Press this key to open the Utility menu, for initializing the printer. Settings Press this key to open the Settings menu.
xii What the Machine Can Do
Before You Start Using the Machine 1 CHAPTER This chapter describes how to set up the printing environment from the touch panel display. Menu Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 What Are Menu Functions? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2 Accessing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Menu Functions This chapter describes the menu functions and how to access them with the touch panel display. Before You Start Using the Machine 1 What Are Menu Functions? The machine lets you specify the number of copies, the paper size, etc., to use when it receives a print job. Normally, however, these types of settings are specified by the application sending the print job, or by the printer driver. However, you can specify many other settings other than the number of copies, the paper size, etc.
Accessing the Menus To access the printer related menu functions, display the Printer Settings screen on the touch panel display and use the keys on the display to specify the settings. 1 Press Additional Functions . Clear Reset 1 2 3 4 5 6 7 8 9 ✳ 0 # C Star Guide ? Additional Functions Intereupt 2 ID Press [Printer Settings]. Menu Functions 1-3 1 Before You Start Using the Machine IMPORTANT • You can access menus and modify settings while print jobs are waiting in the queue.
3 Press [Settings] or [Utility] to access the corresponding menu. The Settings menu provides access to common settings, such as number of copies, error handling, and toner density. The Utility menu provides access to the reset printer function.
Using the Printer Settings Menu The Printer Settings Menu enables you to access common features. Below is an abbreviated outline of the Printer Settings Menu structure. For a detailed description of all Printer Settings Menu options, see “Printer Settings Menu Functions and Operation,” on p. 3-1 through p. 3-23.
As an example, the following is the sequence of steps for setting the number of copies. 1 Press Additional Functions . Clear Reset 1 1 2 3 4 5 6 7 8 9 ✳ 0 # C Start Before You Start Using the Machine Guide ? Additional Functions Intereupt 1-6 2 Press [Printer Settings]. 3 Press [Settings].
4 Press [Copies]. 5 6 Enter the number of copies using the numeric keys or [-] and [+]. Confirm the setting, then press [OK].
Using the Report Settings Menu The Report Settings Menu enables you to access report print features such as checking the configuration. Below is an abbreviated outline of the Report Settings Menu structure. For a detailed description of Report Settings Menu options, see “Report Settings Menu,” on p. 4-1.
As an example, the following is the sequence of steps for printing a Configuration Page. Additional Functions . Clear Reset 1 2 3 Star Guide ? 1 C 4 5 6 7 8 9 ✳ 0 # Before You Start Using the Machine 1 Press Additional Functions Intereupt 2 Press [Report Settings]. 3 Press [Printer].
4 Press [PCL]. 5 Press [Configuration Page]. 6 Press [Yes] to print the page.
Configuration Page Sample If the printer function is working correctly, the Configuration Page will be similar to the sample below.
Before You Start Using the Machine 1 1-12 Using the Report Settings Menu
Menu Functions and Operation 2 CHAPTER This chapter describes outline of all functions and settings. Printer Settings Menu Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Report Settings Menu Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printer Settings Menu Functions The following table lists all settings of the Printer Settings Menu. NOTE • The bold values indicate the default settings. Menu Functions and Operation 2 Setting Available Options Description Settings Menu (See p.3-3) Copies 1 - 2000 Sets the number of copies to be printed. 2-Sided Printing On, Off Turns double-sided printing on or off.
Setting Available Options Description On, Off Turns the Auto Continue function on or off. When Auto Continue is enabled, the machine automatically continues if an error skip error ocurrs. Job Securing Time 1 hour, 2 hours, 3 hours, 6 hours, 12 hours, 24 hours Determines how long a secured job remains in the queue before being cancelled. Timeout Timeout (5 - 15 - 300 s), Off Determines the timeout interval in seconds.
Setting Description Symbol Set DESKTOP, ISO4, ISO6, ISO11, ISO15, ISO17, ISO21, ISO60, ISO69, ISOL1, ISOL2, ISOL5, ISOL6, LEGAL, MATH8, MCTEXT, MSPUBL, PC775, PC8, PC850, PC852, PC8DN, PC8TK, PC1004, PIFONT, PSMATH, PSTEXT, ROMAN8, VNINTL, VNMATH, VNUS, WIN30, WINBALT, WINL1, WINL2, WINL5 Sets the symbol set. Custom Paper On, Off Toggles custom paper on or off. Unit of Measure Millimeters, Inches Sets the unit of measurement for specifying the custom paper size.
Report Settings Menu Functions The following table lists functions of the Report Settings Menu. Setting Description 2 Menu Functions and Operation Printer Menu (See p.4-1) PCL Configuration Page Enables you to print the PCL Configuration Page. Font List Enables you to print the PCL Font List. PS (Printer Kit-C1 Only) Configuration Page Enables you to print the PS Configuration Page. Font List Enables you to print the PS Font List.
Menu Functions and Operation 2 2-6 Report Settings Menu Functions
Printer Settings Menu Functions and Operation 3 CHAPTER This chapter describes how to use the Printer Settings Menu and its submenus. Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3 2-Sided Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. Printer Settings Menu Functions and Operation Custom Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unit of Measure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X Dimension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Y Dimension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Settings Menu NOTE • The bold values indicate the default settings. 1-2000 Enables you to specify the number of copies printed. The default setting is 1, but you can specify up to 2000 copies. 2-Sided Printing On, Off This parameter selects one-sided or two-sided printing. When 2-Sided Printing is specified, the document is printed on both sides of the paper.
Paper Feed Default Paper Size Letter, Legal, A4, A3, A5, 11x17, Executive, Statement, Monarch, COM10, DL, ISO-B5, ISO-C5 This parameter defines the default paper size used when the paper size cannot be set within the application software, when no paper source is specified. IMPORTANT • If you are printing from an OS that does not have a printer driver for the machine (MS-DOS, UNIX, etc.) make sure that the paper loaded in the paper drawer matches the paper size specified in this setting.
Default Paper Type Plain Paper, Transparency, Heavy Paper, Recycled, Color, Letterhead, Tracing Paper, Labels, Bond Paper, Envelope This parameter sets the default paper type to be used for print job. This printer has internally defined optimal print modes for each specified paper type. IMPORTANT NOTE • Use the following figures as a guideline to decide whether paper should be specified as Plain Paper or Heavy Paper.
Print Quality Image Refinement On, Off This setting smoothes the jagged outlines of characters and graphics. If [On] is selected, smoothing is performed before printing. If [Off] is selected, jobs are printed without being smoothed. NOTE • The results of image refinement might be different depending on the types of characters and graphics you want to print. Density 3 1-5-9 Printer Settings Menu Functions and Operation This setting adjusts the print density.
Layout Long Edge, Short Edge This parameter determines whether the binding position is along the long edge or the short edge of the paper. When binding for 2-sided printing, the image orientation is automatically adjusted for correct layout.
Margin -30.0 - 0.0 - +30.0 mm (in increments of 0.5 mm) This setting sets the page margin in mm. The settings can be set between -30.0 mm (-1.20 inch) to +30.0 mm (+1.20 inch) in increments of 0.5 mm (0.01 inch). Use [ ] to increase the width of the inside margin. Use [ increase the size of the outside margin.
Binding and Margin Settings Refer to the figures below to set binding and margins.
Offset X Offset Y -50.0 - 0.0 - +50.0 mm (in increments of 0.5 mm) This setting sets the offset position in mm. The settings can be set between -50.0 mm (-2.00 inch) to +50.0 mm (+2.00 inch) in increments of 0.5 mm (0.01 inch). The print position is adjusted in the vertical or horizontal direction only to the value specified in the setting value. You can increase or decrease the setting in increments of 0.5 mm (0.01 inch) to adjust the print position as described below.
Auto Continue On, Off You can set whether or not this function is used automatically to temporarily clear an error and continue printing (Error skip) when an error occurs. When [Off] has been selected, you must use the touch panel display to perform an error skip. When [On] has been selected, an error skip is performed automatically.
Timeout Timeout (5 - 15 - 300 s), Off When the machine is set to switch between printer modes, the machine detects the control commands and starts printing in the appropriate mode. After all the data has been received and the end of the data is detected, the print mode stops. This processing of print data is called a job. If the data for a job does not end, the machine will not start the next job even if it receives other print commands.
None, Rotate Collating, Rotate Grouping, Offset Collating, Offset Grouping, Staple Sort Staple Position Corner (Upper-L), Double (Top) Corner (Upper-R), Double (Right) Corner (Lower-R), Double (Bottom) Corner (Lower-L), Double (Left) Some of the above options require specific delivery trays and may not be available unless appropriate delivery trays are installed: No options Saddle Finisher-J1 Finisher-G1 Rotate Collating Yes Yes No Rotate Grouping Yes Yes No Offset Collating No Yes Yes Offset
Examples of each Finisher option when printing three copies of a threepage document: Rotate Collating None 1 2 3 1 1 1 2 2 2 3 3 3 1 2 3 Offset Collating Rotate Grouping 2 2 2 3 1 1 1 1 2 3 3 3 3 1 2 3 1 2 3 Staple Sort Offset Grouping Printer Settings Menu Functions and Operation 1 2 3 1 1 1 3 3 3 1 2 2 2 1 1 NOTE • Rotate Collating and Rotate Grouping are available for selection if the paper size is A5, A4, JIS-B5, Letter or Statement, and if the printer has paper of the selected siz
When you select [Staple Sort], you can select the stapling position. Corner (Upper-L) Double (Top) Corner (Upper-R) Double (Right) ABC ABC ABC ABC ABC ABC ABC ABC Double (Bottom) Corner (Lower-L) Double (Left) ABC ABC ABC Corner (Lower-R) ABC ABC ABC ABC ABC NOTE • When stapling paper in landscape orientation, the image orientation and the staple position may not match.
- Finisher-J1 Staple Position Corner Corner Corner Corner Capacity (Upper-L) (Upper-R) (Lower-R) (Lower-L) (Sheets) Paper Size 11x17 No Yes No Yes 15 Legal No Yes No Yes 20 Letter Yes No Yes No 30 Letter-R No Yes* No Yes* 30 Executive Yes No Yes No 30 A3 No Yes No Yes 15 B4 No Yes No Yes 20 A4 Yes No Yes No 30 A4R No Yes* No Yes* 30 JIS-B5 Yes No Yes No 30 3 Printer Settings Menu Functions and Operation NOTE • The maximum number of sheets that ca
On, Off Enables you to prepare the printout for binding as a booklet. Unlike a book, pages in a booklet are bound on the same side. If [On] is selected, the pages are bound on the left side. On 2 7 1 4 6 3 3 NOTE • This function is available for selection if the image page size is B4, A4, A5, Letter-R or Statement. A4 pages are printed on A3 paper, and A5 pages on A4R paper, LetterR pages on 11x17 paper, and Statement pages on Letter paper.
Saddle Stitch On, Off Saddle Stitch enables the machine to bind a finished print job by stapling and folding the pages of a booklet in the center. The Saddle Stitch function is valid only when booklet print is selected. This can be selected independently from the driver. 3 1 8 Printer Settings Menu Functions and Operation 6 3 NOTE • Saddle Stitch can only be performed if the Saddle Finisher-G1 is installed. • Saddle Stitch is not available if [Off] has been selected for [Booklet].
Transparency Interleaving None, Blank, Printed When printing on transparencies you can use this setting to output a sheet of paper after each transparency. The paper can be blank, or it can be a paper copy of the transparency. If [None] is selected, no sheets are interleaved with the transparencies. If [Blank] is selected, a blank sheet of paper is inserted between each transparency. If [Printed] is selected, a printed paper from the print job is inserted between each transparency.
PCL/PS Settings This section explains the different menu settings available for PCL and PS, respectively. PCL Orientation 3 Portrait, Landscape Printer Settings Menu Functions and Operation Enables you to set the paper orientation. If [Portrait] is selected, the print image is printed in portrait orientation regardless of the orientation of the paper in the paper drawers.
Form Lines 5 - 64 - 128 lines Enables you to specify the number of lines to be printed on a page. You can specify from 5 to 128 lines. DESKTOP, ISO4, ISO6, ISO11, ISO15, ISO17, ISO21, ISO60, ISO69, ISOL1, ISOL2, ISOL5, ISOL6, LEGAL, MATH8, MCTEXT, MSPUBL, PC775, PC8, PC850, PC852, PC8DN, PC8TK, PC1004, PIFONT, PSMATH, PSTEXT, ROMAN8, VNINTL, VNMATH, VNUS, WIN30, WINBALT, WINL1, WINL2, WINL5 Enables you to select the symbol set most suited to the needs of the host computer.
Y Dimension 100 - 297 mm Enables you to specify the Y dimension of the custom paper. The Y dimension can be adjusted in increments of 1 mm. This function can be very useful when part of the printed image is cut off. By increasing the dimension some of the missing text may be correctly printed. Make sure you do not increase the X dimension beyond the actual size of the paper you are using for printing. NOTE • This function is not available if the Custom Paper option is set to Off.
Utility Menu This section explains the Utility Menu function. Reset Printer NOTE • If the machine is being used on a network, please note that resetting the printer function may affect data being received from other users. • When you reset the printer function, data for print jobs that have already been received, or are received while the printer function is being reset, may be deleted. However, in some cases the data is not deleted from the machine’s memory.
Printer Settings Menu Functions and Operation 3 3-24 Utility Menu
Report Settings Menu 4 CHAPTER This chapter describes how to use the Report Settings Menu to check the configuration of the print function or print a font list. PCL Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 PS Menu (Printer Kit-C1 Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PCL Menu This section explains the report functions available for PCL. Configuration Page Details of RAM capacity, settings in the printer’s menus, etc. are printed. When you select Configuration Page, the confirmation message “Print configuration page?” is displayed. If you select [Yes], the configuration page will be printed, and if you select [No], it will not be printed. Font List 4 Report Settings Menu ID numbers, names and samples of fonts held by the printer will be printed.
PS Menu (Printer Kit-C1 Only) This section explains the report functions available for PS. Details of RAM capacity, settings in the printer’s menus, etc. are printed. When you select Configuration Page, the confirmation message “Print configuration page?” is displayed. If you select [Yes], the configuration page will be printed, and if you select [No], it will not be printed. Font List 4 ID numbers, names and samples of fonts held by the printer will be printed.
Report Settings Menu 4 4-4 PS Menu (Printer Kit-C1 Only)
Troubleshooting 5 CHAPTER This chapter explains how to solve printing problems and the steps to take if printing fails. Responding to Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Resetting the Machine After a Service Call Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-2 When a Message Is Displayed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 Printing Problems . . . . .
Responding to Error Messages When the status indicator is orange, printing is not possible. If this happens during printing, the print operation stops. Read the displayed error message to determine the appropriate actions necessary to correct the problem. This section describes how to handle error messages that appear on the touch panel display. The two types of error messages are: • Service Call Messages • Error Messages NOTE • Other messages that may appear indicate the current condition of the machine.
When a Message Is Displayed If the printer is unable to print for some reason, the error indicator lights up and a message indicating the cause of the problem is displayed on the touch panel display. When these messages are displayed, take the following action to solve the problem. PDL Offending Command Cause The printer was unable to understand a print command it received. Solution Try resending the PS job. If the problem persists, verify the PS options in the application and print again.
E677-5800 PDL Service Call Service Call Cause An internal error has occurred. Solution Perform a printer reset to try to initialize the function again. If this error persists, contact a service representative. PDL RIP Initialize Error Error Skip Cause An error occurred during printer initialization, and the initialization could not be performed correctly. Solution Try to initialize again. If the error still occurs, perform a reset and try to initialize again.
Printing Problems If you have trouble printing, we recommend dealing with the problems in the following ways. NOTE • Please contact your Canon service representative if a problem persists, or if you encounter problems not listed below. Printer Trouble The printer does not work 5 There is data remaining in the printer’s memory (The Processing/Data lamp is flashing or lit.) Solution Print out the data. Reference See “Operating Print Jobs Sent from a Computer,” in the Reference Guide.
Printing Problems Meaningless characters are being printed Cause 1 You have printed from Windows without installing the printer driver for Windows that was included with the printer. Solution Install the printer driver for Windows that was included with the printer and print the data again. Reference See the PCL Driver Guide and the PS Driver Guide. Cause 2 Solution Reset the DOS application software printer settings on a printer that is compatible with the machine.
The data does not fit on the page properly (All of the data that should be on the page is not printed) Cause 1 The paper is not in the correct position. Solution Make sure the printer’s set correctly and try printing again. Reference See “Loading Paper,” in the Reference Guide. Cause 2 A full page of data, without a border, was printed. Solution Insert a border greater than 5 mm (3/16 in.) around the data and print the data again. (Data cannot be printed in a border area of 5 mm (3/16 in.
Print Quality Problems The printout is too light or too dark Cause 1 The toner density settings are not correct. Solution Adjust Density in the printer settings menu. Reference See “Density,” on p. 3-6. Cause 2 Toner Save in the printer settings menu is set to [On]. Solution Toner Save Mode to [Off]. Reference See “Toner Save,” on p.
Appendix 6 CHAPTER This chapter shows print samples for different fonts, describes font information, including sources and font lists, and lists a summary of the specifications for the machine. Some Basic Facts About Fonts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 What Is a Font? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2 Attributes of Fonts . . . . . . . . . . . . . . . .
Some Basic Facts About Fonts This section summarises some of the basic facts you should know about fonts. What Is a Font? A font is a collection of letters and symbols used when printing a document. In general, a group of letters and symbols sharing a common design is referred to as a font. A font consists of the letters A to Z in both upper and lowercase, digits, and symbols. The design that distinguishes one font from another is referred to as a “typeface.
Typeface Typeface refers to the design of the characters and symbols. The following figure shows an example of some typefaces. ■ Typeface Courier ABCDEFGHIJKLMNOPQRSTUVWXYZ Times ABCDEFGHIJKLMNOPQRSTUVWXYZ Helvetica ABCDEFGHIJKLMNOPQRSTUVWXYZ Stroke Weight Stroke weight refers to the thickness of the print. There are light, medium, and bold stroke weights. The printer function has medium and bold fonts available. The figure below shows an example of medium and bold printing.
Point size Point size refers to the height of the character. Point size is measured in points. One inch is divided into 72 points and 1 point is 1/72 of an inch (about 0.35 mm). The printer function has bit-mapped fonts and scalable fonts available. The bit-mapped fonts are fixed in size, but the scalable fonts are not fixed in size. Scalable fonts are freely scalable to any size you wish in 0.1 point increments. The following figure shows an example of various point sizes.
Pitch (cpi) Pitch refers to the number of characters that are printed in one inch. The unit is cpi (characters per inch). As the number of characters per inch increases, the space between characters decreases; as the cpi decreases, the space between characters increases. ■ Pitch Character Width (Fix and PS) Each character has a different width from all the other characters in a font at a given point size. For example, “W” is a wider letter than “I.
■ Fixed spacing and Proportional spacing Fixed spacing Proportional spacing Orientation Orientation refers to the direction of printing. The printer function can print using two different paper orientations: portrait and landscape. With portrait orientation, text is printed across the width of the paper (short edge), and with landscape orientation, text is printed across the length of the paper (long edge).
Symbol Set When you print the letter “A,” the host computer sends a code corresponding to “A” (hexadecimal 41 is an example of this) to the machine. This code is referred to as the character code. The machine stores an internal representation of each character, and selects from among these character patterns the pattern corresponding to the received code. In this case, the machine searches for the pattern for “A,” and prints it.
Bit-mapped Fonts and Scalable Fonts There are two types of fonts available, and these fonts are distinguished by the type of data from which they are formed. • Bit-mapped fonts • Scalable fonts Bit-mapped Fonts Each character of bit-mapped fonts are composed of grid of small dots and stored in the machine’s memory in dot matrix. Bit-mapped fonts are fixed in size and specified by the characteristics called “attributes,” such as typeface, stroke weight, style and so on.
Scalable Fonts With scalable fonts, characters are freely enlarged or compressed from the one point to any size you wish in 0.1 point increments.
Standard Scalable Fonts (PCL) With scalable fonts, characters are freely enlarged or compressed from one point to any size you wish in 0.1 point increments. (The maximum range of scaling depends on the size of the memory installed in the machine and the size of the paper used.) The following scalable typefaces are included with the machine.
Code 128 Expanded Bold Codebar Codebar Condensed Codebar Expanded Interleaved 2 of 5 Light Interleaved 2 of 5 Interleaved 2 of 5 Semi Interleaved 2 of 5 Bold Interleaved 2 of 5 Narrow Light Interleaved 2 of 5 Narrow Interleaved 2 of 5 Narrow Semi Interleaved 2 of 5 Narrow Bold MSI Plessey PostNet UPC/EAN UPC/EAN Bold UPC/EAN Condensed UPC/EAN Condensed Bold UPC/EAN Expanded UPC/EAN Expanded Bold Symbol Sets (For Scalable Typefaces Only) The following symbol sets are included with the machine.
BookmanCE Light Bookman LightItalic BookmanCE LightItalic Bookman Demi BookmanCE Demi Bookman DemiItalic BookmanCE DemiItalic Candid Chicago Chicago CE Clarendon ClarendonCE Clarendon Light ClarendonCE Light Clarendon Bold ClarendonCE Bold CooperBlack CooperBlack Italic Copperplate ThirtyTwoBC Copperplate ThirtyThreeBC Coronet Regular CoronetCE Regular Courier CourierCE Courier Oblique CourierCE Oblique Courier Bold CourierCE Bold Courier BoldOblique CourierCE BoldOblique Eurostile EurostileCE Eurostile Bol
TimesNewRomanPS ItalicMT TimesNewRomanCE Italic TlmesNewRomanPS BoldMT TimesNewRomanCE Bold TimesNewRomanPS BoldItalicMT TimesNewRomanCE BoldItalic Univers UniversCE Medium Univers Oblique UniversCE Oblique Univers Bold UniversCE Bold Univers BoldOblique UniversCE BoldOblique Univers Light UniversCE Light Univers Light Oblique Univers CE Light Oblique Univers Condensed UniversCE Condensed Univers CondensedOblique UniversCE CondensedOblique Univers CondensedBold UniversCE CondensedBold Univers CondensedBoldO
Checking the Font Lists for Available Fonts Font lists are a comprehensive listing of all fonts currently available. The listing contains both the names of resident fonts, and the names of the fonts stored on any external hard disk that may be present.
The Font List includes the following information: q Font Name The typeface name. w Spacing This indicates whether a font is a fixed-size, non-proportional font or a proportional font. e Style Upright (straight) characters or italic (slanted) characters. r Stroke Weight The stroke weight of the characters in the font. t Pitch/Point Size The pitch and point size. For a scalable font, Scale is displayed. The vertical distance in points from the top of capital letters to the tail of the letter y.
Typeface Samples Standard Scalable Fonts (PCL) Courier CG Times CG Times Bold CG Times Italic CG Times Bold Italic CG Omega CG Omega Bold CG Omega Italic CG Omega Bold Italic Coronet Clarendon Condensed Univers Medium 6 Appendix Univers Bold Univers Medium Italic Univers Bold Italic Univers Medium Condensed Univers Bold Condensed Univers Medium Condensed Italic Univers Bold Condensed Italic Antique Olive Antique Olive Bold Antique Olive Italic Garamond Antique Garamond Halbfett Garamond Kursiv Garamond Ku
Marigold Albertus Medium Albertus Extra Bold Arial Arial Bold Arial Italic Arial Bold Italic Times New Times New Bold Times New Italic Times New Bold Italic Helvetica Helvetica Bold Helvetica Oblique Helvetica Bold Oblique 6 Helvetica Narrow Appendix Helvetica Narrow Bold Helvetica Narrow Oblique Helvetica Narrow Bold Oblique Palatino Roman Palatino Bold Palatino Italic Palatino Bold Italic ITC Avant Garde Gothic Book ITC Avant Garde Gothic Demi ITC Avant Garde Gothic Book Oblique Checking the Font Lis
ITC Avant Garde Gothic Demi Oblique ITC Bookman Light ITC Bookman Demi ITC Bookman Light Italic ITC Bookman Demi Italic New Century Schoolbook Roman New Century Schoolbook Bold New Century Schoolbook Italic New Century Schoolbook Bold Italic Times Roman Times Bold Times Italic Times Bold Italic ITC Zapf Chancery Medium Italic Symbol 6 SymbolPS Appendix Wingdings ITC Zapf Dingbats Courier Bold Courier Italic Courier Bold Italic Letter Gothic Letter Gothic Bold Letter Gothic Italic CourierPS CourierPS Bol
Bar Code Scalable Fonts (PCL) BC 3 of 9 Thin BC 3 of 9 Light BC 3 of 9 BC 3 of 9 Semi BC 3 of 9 Heavy Code 128 Code 128 Bold Code 128 Condensed Code 128 Condensed Bold Code 128 Expanded Code 128 Expanded Bold Interleaved 2 of 5 Light Interleaved 2 of 5 Interleaved 2 of 5 Semi 6 Interleaved 2 of 5 Bold Appendix Interleaved 2 of 5 Narrow Light Interleaved 2 of 5 Narrow Interleaved 2 of 5 Narrow Semi Interleaved 2 of 5 Narrow Bold UPC/EAN UPC/EAN Bold UPC/EAN Condensed UPC/EAN Condensed Bold UPC/EAN Expand
OCR Code Scalable Fonts (PCL) OCR A OCR B Bit-mapped Fonts Line Printer Line Printer Line Printer Line Printer Line Printer Line Printer Line Printer Line Printer Line Printer Appendix 6 6-20 Checking the Font Lists for Available Fonts
PS Fonts (Printer Kit-C1 Only) AlbertusMT AlbertusMT Italic AlbertusMT Light AntiqueOlive Roman AntiqueOliveCE Roman AntiqueOlive Italic AntiqueOliveCE Italic AntiqueOlive Bold AntiqueOliveCE Bold AntiqueOlive Compact AntiqueOliveCE Compact Apple Chancery Apple ChanceryCE ArialMT ArialCE 6 Arial ItalicMT Appendix ArialCE Italic Arial BoldMT ArialCE Bold Arial BoldItalicMT ArialCE BoldItalic AvantGarde Book AvantGardeCE Book AvantGarde BookOblique AvantGardeCE BookOblique AvantGarde Demi AvantGardeCE Dem
AvantGardeCE DemiOblique Bodoni BodoniCE Bodoni Italic BodoniCE Italic Bodoni Bold BodoniCE Bold Bodoni BoldItalic BodoniCE BoldItalic Bodoni Poster BodoniCE Poster Bodoni PosterCompressed BodoniCE PosterCompressed Bookman Light BookmanCE Light Bookman LightItalic 6 BookmanCE LightItalic Appendix Bookman Demi BookmanCE Demi Bookman DemiItalic BookmanCE DemiItalic Candid Chicago Chicago CE Clarendon ClarendonCE Clarendon Light ClarendonCE Light 6-22 Checking the Font Lists for Available Fonts
Clarendon Bold ClarendonCE Bold CooperBlack CooperBlack Italic Copperplate ThirtyTwoBC Copperplate ThirtyThreeBC Coronet Regular CoronetCE Regular Courier CourierCE Courier Oblique CourierCE Oblique Courier Bold CourierCE Bold Courier BoldOblique CourierCE BoldOblique 6 Eurostile Appendix EurostileCE Eurostile Bold EurostileCE Bold Eurostile ExtendedTwo EurostileCE ExtendedTwo Eurostile BoldExtendedTwo EurostileCE BoldExtendedTwo Geneva GenevaCE GillSans GillSansCE Roman Checking the Font Lists for Ava
GillSans Italic GillSansCE Italic GillSans Bold GillSansCE Bold GlllSans BoldItalic GlllSansCE BoldItalic GillSans Condensed GillSansCE Condensed GillSans BoldCondensed GillSansCE BoldCondensed GillSans Light GillSansCE Light GillSans LightItalic GillSansCE LightItalic GillSans ExtraBold GillSansCE ExtraBold 6 Goudy Appendix Goudy Italic Goudy Bold Goudy BoldItalic Goudy ExtraBold Helvetica HelveticaCE Helvetica Oblique HelveticaCE Oblique Helvetica Bold HelveticaCE Bold Helvetica BoldOblique 6-24 Che
HelveticaCE BoldOblique Helvetica Condensed HelveticaCE Cond Helvetica Condensed Oblique HelveticaCE CondObl Helvetica Condensed Bold HelveticaCE CondBold Helvetica Condensed BoldObl HelveticaCE CondBoldObl Helvetica Narrow HelveticaCE Narrow Helvetica Narrow Bold HelveticaCE NarrowBold Helvetica Narrow BoldOblique HelveticaCE Narrow BoldOblique Helvetica Narrow Oblique 6 HelveticaCE NarrowOblique Appendix HoeflerText Regular HoeflerTextCE Regular HoeflerText Italic HoeflerTextCE Italic HoeflerText Blac
JoannaMT Italic JoannaMTCE Italic JoannaMT Bold JoannaMTCE Bold JoannaMT BoldItalic JoannaMTCE BoldItalic LetterGothic LetterGothicCE LetterGothic Slanted LetterGothicCE Slanted LetterGothic Bold LetterGothicCE Bold LetterGothic BoldSlanted LetterGothicCE BoldSlanted LubalinGraph Book LubalinGraphCE Book 6 LubalinGraph BookOblique Appendix LubalinGraphCE BookOblique LubalinGraph Demi LubalinGraphCE Demi LubalinGraph DemiOblique LubalinGraphCE DemiOblique Marigold Monaco MonacoCE MonaLisa Recut NewCentur
NewCenturySchlbk Italic NewCenturySchlbkCE Italic NewCenturySchlbk Bold NewCenturySchlbkCE Bold NewCenturySchlbk BoldItalic NewCenturySchlbkCE BoldItalic NewYork NewYorkCE Optima OptimaCE Roman Optima Italic OptimaCE Italic Optima Bold OptimaCE Bold Optima BoldItalic OptimaCE BoldItalic 6 Oxford Appendix Palatino Roman PalatinoCE Roman Palatino Italic PalatinoCE Italic Palatino Bold PalatinoCE Bold Palatino BoldItalic PalatinoCE BoldItalic StempelGaramond Roman StempelGaramondCE Roman StempelGaramond It
StempelGaramondCE Italic StempelGaramond Bold StempelGaramondCE Bold StempelGaramond BoldItalic StempelGaramondCE BoldItalic Symbol Tekton Times Roman TimesCE Roman Times Italic TimesCE Italic Times Bold TimesCE Bold Times BoldItalic TimesCE BoldItalic TimesNewRomanPSMT 6 TimesNewRomanCE Appendix TimesNewRomanPS ItalicMT TimesNewRomanCE Italic TlmesNewRomanPS BoldMT TimesNewRomanCE Bold TimesNewRomanPS BoldItalicMT TimesNewRomanCE BoldItalic Univers UniversCE Medium Univers Oblique UniversCE Oblique Uni
UniversCE Bold Univers BoldOblique UniversCE BoldOblique Univers Light UniversCE Light Univers Light Oblique Univers CE Light Oblique Univers Condensed UniversCE Condensed Univers CondensedOblique UniversCE CondensedOblique Univers CondensedBold UniversCE CondensedBold Univers CondensedBoldOblique UniversCE CondensedBoldOblique Univers Extended 6 UniversCE Extended Appendix Univers ExtendedObl UniversCE ExtendedObl Univers BoldExt UniversCE BoldExt Univers BoldExtObl UniversCE BoldExtObl Wingdings Regul
Symbol Sets ASCII Appendix 6 DeskTop 6-30 Checking the Font Lists for Available Fonts
ISO 8859-1 Latin 1 6 Appendix ISO 8859-10 Latin 6 Checking the Font Lists for Available Fonts 6-31
ISO 8859-2 Latin 2 6 Appendix ISO 8859-9 Latin 5 6-32 Checking the Font Lists for Available Fonts
ISO French 6 Appendix ISO German Checking the Font Lists for Available Fonts 6-33
ISO Italian 6 Appendix ISO Norwegian 6-34 Checking the Font Lists for Available Fonts
ISO Spanish 6 Appendix ISO Swedish Checking the Font Lists for Available Fonts 6-35
ISO United Kingdom 6 Appendix Legal 6-36 Checking the Font Lists for Available Fonts
Math-8 6 Appendix MC Text Checking the Font Lists for Available Fonts 6-37
Microsoft Publishing 6 Appendix PC-1004 6-38 Checking the Font Lists for Available Fonts
PC-775 6 Appendix PC-8 Checking the Font Lists for Available Fonts 6-39
PC-8 D/N 6 Appendix PC-850 6-40 Checking the Font Lists for Available Fonts
PC-852 6 Appendix PC-Turkish Checking the Font Lists for Available Fonts 6-41
PI Font 6 Appendix PS Math 6-42 Checking the Font Lists for Available Fonts
PS Text 6 Appendix Roman-8 Checking the Font Lists for Available Fonts 6-43
Symbol 6 Appendix Ventura International 6-44 Checking the Font Lists for Available Fonts
Ventura Math 6 Appendix Ventura US Checking the Font Lists for Available Fonts 6-45
Windows 3.0 Latin 1 6 Appendix Windows 3.
Windows 3.1 Latin 2 6 Appendix Windows 3.
Windows Baltic 6 Appendix Wingdings 6-48 Checking the Font Lists for Available Fonts
3 of 9 Barcode 6 Appendix Code 128 Checking the Font Lists for Available Fonts 6-49
Codebar 6 Appendix Interleaved 2 of 5 6-50 Checking the Font Lists for Available Fonts
MSI / Plessey 6 Appendix PostNet Checking the Font Lists for Available Fonts 6-51
UPC / EAN barcode 6 Appendix OCR-A 6-52 Checking the Font Lists for Available Fonts
OCR-B Appendix 6 Checking the Font Lists for Available Fonts 6-53
Configuration Page Sample PCL Configuration Page q PS Configuration Page (Printer Kit-C1 Only) 6 Appendix w r t q e w t y e u 6-54 Configuration Page Sample r
The Configuration Page includes the following information: q Hardware Configuration This section displays the hardware configuration of the machine, including any options that have been installed. w Common Settings This section displays the common printer settings of the machine, as determined by the Settings menu. (See "Settings Menu," on p. 3-3.
Specifications Software Specifications Command language: PCL 6, PCL 5e, PostScript 3 emulation Resident fonts: PCL 80 Scalable fonts 30 Barcode fonts 2 OCR fonts 9 Bitmap fonts PS (Printer Kit-C1 Only) 136 Scalable fonts Printable area: PCL 5e Reduced to 4 mm from the top, bottom, left, and right edges of the paper. PCL 6, PostScript 3 emulation Reduced 4 mm from the top, bottom, left, and right edges of the paper.
Index Numerics 2-Sided Printing .......................................................................................................................... 3-3 A Accessing the Menus ................................................................................................................. 1-3 Append CR to LF ...................................................................................................................... 3-22 Auto Continue ..........................................................
F Finisher ..................................................................................................................................... 3-13 Fix/PS ................................................................................................................................. 6-2, 6-5 Font List (PCL) ............................................................................................................................ 4-2 Font List (PS) ........................................................
O OCR Font List ........................................................................................................................... 6-10 Offset Collating ......................................................................................................................... 3-13 Offset Grouping ........................................................................................................................ 3-13 Offset X ........................................................................
Staple Position .......................................................................................................................... 3-13 Staple Sort ................................................................................................................................ 3-13 Stroke Weight .................................................................................................................... 6-3, 6-15 Style ...........................................................................
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.V. Bovenkerkerweg 59-61 P.O. Box 2262, 1180 EG Amstelveen, The Netherlands CANON FRANCE S.A. 17,quai du President Paul Doumer 92414 Courbevoie Cedex, France CANON (U.K.) LTD.