Copying Guide Please read this guide before operating this equipment. After you finish reading this guide, store it in a safe place for future reference.
iR2020/iR2016 Copying Guide
Manuals for the Machine The manuals for this machine are divided as follows. Please refer to them for detailed information. The manuals supplied with optional equipment are included in the list below. Depending on the system configuration and product purchased, some manuals may not be needed. Guides with this symbol are printed manuals.
• PCL Printer Driver Installation and Instructions • UFR II Printer Driver Installation and Instructions • Fax Driver Installation and Instructions PCL Driver Guide CD-ROM UFR II Driver Guide CD-ROM Fax Driver Guide CD-ROM To view the manual in PDF format, Adobe Reader/Adobe Acrobat Reader is required. If Adobe Reader/Adobe Acrobat Reader is not installed on your system, please download it from the Adobe Systems Incorporated website.
How This Manual Is Organized Chapter 1 Basic Copying Features Chapter 2 Special Copying Features Chapter 3 Customizing Settings Chapter 4 Appendix Includes the available combination of functions and index. Considerable effort has been made to ensure that this manual is free of inaccuracies and omissions. However, as we are constantly improving our products, if you need an exact specification, please contact Canon.
Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii How to Use This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Symbols Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Keys Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Illustrations Used in This Manual . . . . . . . .
Paper Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-26 Auto Paper Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-26 Manual Paper Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-28 Density and Image Quality Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-30 Automatic Density Adjustment . . . . . . . . . . . . . . . . . . . . . . .
Chapter 3 Customizing Settings Copy Settings Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Specifying Copy Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Image Direction Priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 Auto Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
] Preface Thank you for purchasing the iR2020/iR2016. Please read this manual thoroughly before operating the machine in order to familiarize yourself with its capabilities, and to make the most of its many functions. After reading this manual, store it in a safe place for future reference. How to Use This Manual Symbols Used in This Manual The following symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions that should be observed for safety.
Illustrations Used in This Manual Illustrations used in this manual are those displayed when the iR2016 has the following optional equipment attached to it: Fax Panel-A1, Feeder (DADF-P1), Super G3 FAX Board-T1, Finisher-U1, Additional Finisher Tray-C1, and Cassette Feeding Module-J1.
Legal Notices Trademarks Canon, the Canon logo, and iR are trademarks of Canon Inc. Adobe and Adobe Acrobat are trademarks of Adobe Systems Incorporated. Other product and company names herein may be the trademarks of their respective owners. Copyright Copyright 2005 by Canon Inc. All rights reserved.
Basic Copying Features 1 CHAPTER This chapter describes the basic copying features. Overview of the iR2020/iR2016 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Standard Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2 Optional Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overview of the iR2020/iR2016 Standard Features Basic Copying Features 1 ■ Copy Reduction/Enlargement You can manually select a reduction/enlargement ratio from 50% to 200%. You can also set the machine to automatically select an appropriate ratio to fit the paper size you are copying onto. ■ Automatic and Manual Density/Image Quality Adjustment The machine can automatically set the most suitable density for the document you are copying.
■ Sleep Mode This machine incorporates an energy saver feature to conserve power called the Auto Sleep mode. The Auto Sleep mode conserves energy by lowering the temperature of the fixing unit when the machine is not used for a prolonged period of time. You can set the machine to enter the Sleep mode manually by pressing the control panel power switch or specify the amount of time that must be taken before the machine automatically enters the Sleep mode.
Flow of Copy Operations This section describes the flow of basic copy operations. 1 Basic Copying Features NOTE • For the following items, see the Reference Guide: - Main power and control panel power switch - Routine maintenance • Output quality may deteriorate if the platen glass is dirty. Always keep the platen glass clean. • Do not touch the feeder or platen cover while copying. Rocking the feeder or cover can distort the image being copied.
● If the message appears: ❑ Insert a control card into the optional Card Reader-E1. INSERT CONTROL CARD Basic Copying Features 1 NOTE For instructions on using the optional Card Reader-E1, see Chapter 4, “Optional Equipment,” in the Reference Guide. 2 Specify the desired copy modes. 100% AUTO A4 A TEXT O1 NOTE For details about these settings, see pages from 1-26 in this chapter, or Chapter 2, “Special Copying Features”.
3 Press 0 - 9 [numeric keys] to enter the desired copy quantity (1 to 99). 100% AUTO A4 A TEXT 1 1O Basic Copying Features NOTE For instructions on setting the number of copies, see “Specifying the Required Number of Copies,” on p. 1-24. 4 Press [Start]. SCANNING Copying starts. IMPORTANT You cannot change copy mode settings, such as the copy quantity, paper size, and copy ratio while the machine is copying.
5 If you want to stop or copy other originals during a copy job, follow the instructions below. ● If you want to stop a copy job: [Stop]. NOTE • For instructions on canceling a copy job, see “Canceling a Copy Job,” on p. 1-19. • You can also cancel a copy job from the System Monitor screen. (See “Using the System Monitor Screen,” on p. 1-20.) ● If you want to start copying the next original while a previous original is printing: ❑ Place your originals ➞ press [Start].
7 If the optional Card Reader-E1 is attached, remove the control card. Basic Copying Features 1 NOTE For instructions on using the optional Card Reader-E1, see Chapter 4, “Optional Equipment,” in the Reference Guide. 8 If the Department ID Management is set, press Out]. [Log In/ NOTE For instructions on using Department ID Management, see Chapter 6, “System Manager Settings,” in the Reference Guide.
Standby Display The Standby display differs depending on which mode is selected.
Placing Originals Place your originals on the platen glass or into the feeder, depending on the size and type of the original, and the copy modes you want to use. Basic Copying Features 1 ■ Platen Glass Place the originals on the platen glass when copying bound originals (such as books and magazines), heavy or lightweight originals, and transparencies. ■ Feeder (DADF-P1) Place the originals into the feeder when you want to copy several originals at the same time ➞ press [Start].
Orientation You can place original either vertically or horizontally. Always align the top edge of your original with the back edge of the platen glass (by the arrow in the top left corner), or with the back edge of the feeder. Platen Glass Basic Copying Features 1 Place the original face down. Place the original face down. Vertical Placement Horizontal Placement Feeder ABC Place the original face up. Vertical Placement ABC Place the original face up.
NOTE • If the top edge of the original is not aligned with the back edge of the platen glass (by the arrow in the top left corner), your original may not be scanned correctly, depending on the copy mode that you have set. • A4 and A5 originals can be placed either vertically or horizontally. However, the scanning speed for horizontally placed originals is somewhat slower than that for vertically placed originals.
Platen Glass Place the originals on the platen glass when scanning bound originals (such as books and magazines), originals on heavy or lightweight paper, and transparencies. 1 Lift the feeder/platen cover. Sensor IMPORTANT The machine is equipped with an open/close sensor on the feeder/platen cover. (see the circled area in the above illustration). When placing originals on the platen glass, lift the feeder/platen cover high enough so that the open/close sensor underneath is fully released.
2 Place your originals face down. Basic Copying Features 1 The surface of the original that you want to copy must be placed face down. Align the top edge of your original with the back edge of the platen glass (by the arrow in the top left corner). Place books and other bound originals on the platen glass in the same way. NOTE When you are enlarging an A4 or A5 original onto A3 paper, place the original horizontally on the platen glass, and align it with the A4R or A5R marks.
Gently close the feeder/platen cover. 1 CAUTION • Close the feeder/platen cover gently so that your hands are not caught, otherwise personal injury may result. • Do not press down hard on the feeder/platen cover when using the platen glass to make copies of thick books. Doing so may damage the platen glass and result in personal injury. NOTE • Only the iR2020 model can detect the size of the original placed on the platen glass.
Feeder (DADF-P1) You should use the feeder when you want to copy several originals at the same time. Place the originals into the feeder and press [Start]. The machine automatically feeds the originals to the platen glass and scans them. If you are copying in the Two-Sided mode, two-sided originals can also be automatically turned over and scanned as two-sided documents.
1 Adjust the slide guides to fit the size of your originals. 2 Neatly place your originals with the side to be copied face up into the original supply tray. When enlarging A4 or A5 originals to A3 paper, place your originals horizontally. Place your originals into the feeder as far as they will go.
IMPORTANT • Do not add or remove originals while they are being scanned. • When scanning is complete, remove the originals from the original output area to avoid paper jams. Basic Copying Features 1 Original Output Area NOTE • The scanned originals are output to the original output area in the order that they are fed into the feeder. • When you are enlarging an A4 or A5 original onto A3 paper, place the original horizontally.
Canceling a Copy Job [Stop] on the control panel or from the Using the Stop Key 1 Press [Stop]. ● If you press [Stop] during scanning using the platen glass: STOP KEY PRESSED ❑ Press [OK]. The scanning stops and the copy job is canceled. ● If you press [Stop] during scanning using the feeder: STOP KEY PRESSED PRESS OK KEY ❑ Press [OK]. The scanning stops and the copy job is canceled. Canceling a Copy Job 1 Basic Copying Features You can cancel a copy job by pressing System Monitor screen.
● If you press [Stop] after printing has started: CANCEL COPYING? < YES NO > ❑ Press [ ] to select ‘YES’. If you do not want to cancel the job, press [ 1 ] to select ‘NO’. Basic Copying Features You cannot select multiple jobs and cancel them all at once. Select and cancel one job at a time. The copy job currently being printed is canceled. If there is any reserved copy job, it will start printing. NOTE • If you press [Stop] after priting has started, some sheets of blank paper may be output.
3 Press [ ] or [ ] to scroll through the job list. 0032 10:50 PRINTING 1x 1/ 3 NOTE Depending on the job status, the job numbers are displayed as follows: - With “PRINTING”: Current job - With “-”: Other jobs Basic Copying Features 4 1 Press [OK]. CANCEL COPYING? < YES NO > 5 Press [ ] to select ‘YES’. The selected job is canceled. NOTE • If you do not want to cancel the job, press [ ] to select ‘NO’. • If you want to cancel another job, repeat steps 3 to 5.
Reserved Copying You can set the machine to scan originals even while it is printing or waiting to process a job. Basic Copying Features 1 IMPORTANT You cannot reserve a copy job when paper jams are occurring or no paper is set in the drawers or stack bypass. NOTE • You can reserve up to five copy jobs, including the current job. • You can set different copy modes and paper sources, including the stack bypass, for each reserved job.
1 Place your originals. 2 Set the desired copy modes and quantity (1 to 99). 3 Press Scanning starts. NOTE If you place the original on the platen glass of the iR2016 model, or if the machine cannot detect the original size, specify the original size after pressing [Start]. ORIGINAL SIZE A4 Press [ 4 ] or [ ] to select the size ➞ press [Start]. Once the original is scanned, remove it from the machine. NOTE To cancel a reserved copy, see “Canceling a Copy Job,” on p. 1-19.
Copy Quantity You can make up to 99 copies for each copy job. Basic Copying Features 1 Specifying the Required Number of Copies 1 Press 0 - 9 [numeric keys] to enter the desired copy quantity (1 to 99). 100% AUTO A TEXT 1O The copy quantity appears on the right-hand side of the LCD display. IMPORTANT You cannot change the copy quantity while the machine is copying. Changing the Copy Quantity 1 Press [Clear] to clear the entered number.
Press 0 - 9 [numeric keys] to enter the desired copy quantity (1 to 99). 100% AUTO A TEXT O5 1 The copy quantity appears on the right-hand side of the LCD display. Basic Copying Features 2 IMPORTANT You cannot change the copy quantity while the machine is copying.
Paper Selection You can manually specify a paper size or set the machine to automatically select the paper size for you. Basic Copying Features 1 NOTE • If you are copying an original with an image that extends all the way to the edges onto the same size paper at a copy ratio of 100%, the periphery of the original image may be cut off slightly on the copy.
1 Place your originals. Make sure that is displayed. If not, press [Reset], or press [Paper Select] repeatedly until appears in the LCD display. 100% AUTO A4 A TEXT O1 and the size of the paper loaded in the Paper Drawer are automatically selected according to the detected original size, are displayed on the LCD display. NOTE If the message appears, the paper set is different in size from the original.
2 Press [Start]. Copying starts. NOTE If the machine cannot detect the original size, the paper size does not appear on the LCD display. In this case, specify the original size after pressing [Start]. Basic Copying Features 1 ORIGINAL SIZE A4 Press [ ] or [ ] to select the size ➞ press [Start]. Manual Paper Selection You can make copies after manually selecting the paper size loaded in the paper sources.
3 Press [Start]. Copying starts. NOTE To cancel all settings and return the machine to the Standby display, press [Reset]. Paper Selection 1-29 1 Basic Copying Features NOTE • If there is no paper in the paper source that you have selected, a message prompting you to load the paper of the appropriate size appears on the LCD display. You cannot start copying until you load the paper or change the paper selection.
Density and Image Quality Adjustments You can set the desired density and select the original type before scanning the original. Basic Copying Features 1 Automatic Density Adjustment This mode enables you to set the machine to automatically adjust the density to the level best suited to the quality of the text original. 1 Place your originals. 100% AUTO A4 A TEXT 2 Press [Density] to select the auto mode.
Press [OK]. 100% AUTO A4 A TEXT O1 The machine automatically adjusts the copy density to the level best suited to the quality of the original. NOTE • The original type setting automatically changes to ‘TEXT’ when is set. You cannot select the original type. • An automatic density adjustment may not work with transparencies. In this case, manually adjust the density by pressing [ ] or [ ]. 4 Press [Start]. Copying starts.
Manual Density Adjustment You can manually adjust the density to the most appropriate level for the original. 1 1 Place your originals. Basic Copying Features 100% AUTO A4 A TEXT 2 Press [Density] twice to select the manual mode. DENSITY -LT 3 Press [ O1 ] or [ DK+ ] to adjust the copy density. Press [ ] to move the indicator to the left to make the density lighter, or press [ ] to move it to the right to make the density darker.
Press [OK]. 100% 5 Press AUTO A4 TEXT O1 1 [Start]. Copying starts. NOTE • If you place the original on the platen glass of the iR2016 model, or if the machine cannot detect the original size, specify the original size after pressing [Start]. ORIGINAL SIZE A4 [Start]. Press [ ] or [ ] to select the size ➞ press • To cancel all settings and return the machine to the Standby display, press [Reset].
Original Type Selection This machine is capable of processing and producing copies according to the type of the original. You can manually select the original type so that the machine reproduces copies as faithful as possible to the original. The following three original type modes are available: 1 Basic Copying Features Text Mode The world’s coral reefs, where brilliantly colored fish and a myriad of other tropical creatures come together.
NOTE • The default setting is ‘TEXT’. • Copy density automatically changes to manual mode when ‘PHOTO’ or ‘TEXT/PHOTO’ is selected. • If the original is a transparency, select the original type ➞ adjust the density to the most appropriate level for the original. 1 2 Place your originals. Press [Image Quality] repeatedly until the type of original desired (‘TEXT’, ‘PHOTO’, or ‘TEXT/PHOTO’) appears.
3 Press [Start]. Copying starts. NOTE • If you place the original on the platen glass of the iR2016 model, or if the machine cannot detect the original size, specify the original size after pressing [Start]. 1 Basic Copying Features ORIGINAL SIZE A4 Press [ ] or [ ] to select the size ➞ press [Start]. • To cancel all settings and return the machine to the Standby display, press [Reset].
Changing the Copy Ratio Preset Copy Ratio The machine offers you a variety of preset copy ratios to reduce or enlarge standard size originals to another standard paper size. IMPORTANT Place your originals horizontally when enlarging an A4 or A5 original to A3 paper. NOTE • Placing an original horizontally means setting the original with the longer side sideways. (See “Orientation,” on p. 1-11.
3 Press [ ] or [ ] to select the copy ratio ➞ press [OK]. You can select from the following: -200% MAX. -141% A4 ➞ A3 -100% Basic Copying Features 1 -70% A3 ➞ A4 -50% MIN. NOTE • If the setting in the menu is set to ‘AB’ or ‘INCHES’, the preset copy ratios are: AB: 50% MIN., 70%, 81%, 86%, 100%, 115%, 122%, 141% and 200% MAX. INCHES: 50% MIN., 64% 11×17 ➞ LTR, 73% 11×17 ➞ LGL, 78% LGL ➞ LTR, 100%, 121% LGL ➞ 11×17, 129% LTR ➞ 11×17, 200% MAX.
5 Press [Start]. Copying starts. NOTE • If you place the original on the platen glass of the iR2016 model, or if the machine cannot detect the original size, specify the original size after pressing [Start]. 1 Press [ ] or [ ] to select the size ➞ press Basic Copying Features ORIGINAL SIZE A4 [Start]. • To cancel all settings and return the machine to the Standby display, press [Reset]. Zoom by Percentage You can reduce or enlarge originals by any copy ratio in 1% increments.
1 Place your originals. 2 Press [Copy Ratio] twice. ZOOM 50-200% 100% Basic Copying Features 1 3 Press [ ] or [ ] to set a copy ratio. ZOOM 50-200% 80% You can also use clear your entry. 0 + - 9 + [numeric keys] to enter a value, and You can change the value by pressing [ the value using 0 - 9 [numeric keys]. ] or [ [Clear] to ], even if you have entered NOTE • Enlarging or reducing using the zoom by percentage is not available with the 2 on 1 Combination mode.
4 Press [OK]. 80% AUTO A4 A TEXT O1 The selected mode is set, and the specified copy ratio is displayed. 5 Press [Start]. Copying starts. NOTE • If you place the original on the platen glass of the iR2016 model, or if the machine cannot detect the original size, specify the original size after pressing [Start]. ORIGINAL SIZE A4 Press [ ] or [ ] to select the size ➞ press [Start]. • To cancel all settings and return the machine to the Standby display, press [Reset].
Collating Copies The Finisher modes can be selected to collate the copies in various ways, either by pages or copy sets. Basic Copying Features 1 ■ The table below shows all the finishing modes that are available with each different optional unit, and the paper sizes that can be used.
■ If the Collate Mode is Set: The copies are automatically collated into sets arranged in page order. The output is as follows: Originals Set 1 Set 2 Set 3 Three Copies of Each Page Collated in Page Order 1 1 1 1 2 1 2 3 2 3 4 1 2 3 4 3 4 1 4 ■ If the Offset Collate Mode is Set: The copies are automatically collated into sets arranged in page order and shifted to the front and back alternately.
Page Order Collate 1 2 Basic Copying Features 1 Place your originals. Press / [Collate/Staple] repeatedly until the indicator for the Collate function lights. IMPORTANT • When the optional FInisher-U1 is attached, the Offset Collate mode is set automatically. • The Offset Collate mode can be set only with the optional FInisher-U1 attached.
4 Press [Start]. When the original is placed on the platen glass, follow the instructions that appear on the LCD display. Copying starts. ORIGINAL SIZE A4 [Start]. Press [ ] or [ ] to select the size ➞ press • To cancel this setting, press / [Collate/Staple] repeatedly until the collate indicator turns off. • To cancel all settings and return the machine to the Standby display, press [Reset]. Page Order Staple IMPORTANT Pull out the output auxiliary tray when stapling paper larger than A4.
3 Press 0 - 9 [numeric keys] to enter the desired copy quantity (1 to 99). 100% AUTO A4 A TEXT 1 O5 Basic Copying Features NOTE For more information about entering the copy quantity, see “Specifying the Required Number of Copies,” on p. 1-24. 4 Press [Start]. When the original is placed on the platen glass, follow the instructions that appear in the LCD display. Copying starts.
Special Copying Features 2 CHAPTER This chapter describes the special copying features for document layout and image adjustment. Two-Page Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Frame Erase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Original Frame Erase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Two-Page Separation The Two-Page Separation mode enables you to copy facing pages in a book or bound original to fit onto separate pages. Original Special Copying Features 2 Copy 1 1 IMPORTANT • The Two-Page Separation mode cannot be used with the Binding Hole Erase, 2 on 1 Combination, or Different Size Originals mode. • Place your original on the platen glass. The Two-Page Separation mode cannot be used when the original is placed in the feeder. NOTE • You can start copying from the left page only.
1 Place your original on the platen glass. To make copies in the correct page order, begin copying from the first open page of the book or bound original. Place your original face down, making sure that its top edge is aligned with the back edge of the platen glass (by the arrow in the top left corner). 2 Press [Two-Page Separation]. 2 3 Press [ ] or [ Special Copying Features 2-PAGE SEPARATION OFF ] to select ‘ON’ ➞ press [OK].
4 Press 0 - 9 [numeric keys] to enter the desired copy quantity (1 to 99). 100% * AUTO A4 A TEXT O5 NOTE For more information about entering the copy quantity, see “Specifying the Required Number of Copies,” on p. 1-24. Special Copying Features 2 5 Press [Start]. Copying starts. To scan the next two facing pages, turn the page of the original ➞ place your original on the platen glass ➞ press [Start].
Frame Erase The Frame Erase modes erase shadows and lines that appear if you are copying various types of originals. The following three Frame Erase modes are available. NOTE • You can set the originals of the following sizes: A3, A4R, A4, A5R, A5. • You cannot select the free size paper loaded in the stack bypass. ■ Original Frame Erase The Original Frame Erase mode erases the dark borders and frame lines that appear around the copy if the original is smaller than the selected paper size.
■ Book Frame Erase The Book Frame Erase mode erases the dark borders, as well as center and contour lines that appear if you are copying facing pages in a bound original onto a single sheet of paper. Copy Original Book Frame Erase Selected Special Copying Features 2 Book Frame Erase Not Selected Copy ■ Binding Hole Erase The Binding Hole Erase mode erases the shadows that appear on copies from binding holes on originals.
Original Frame Erase The Original Frame Erase mode erases the dark borders and frame lines that appear around the copy if the original is smaller than the selected paper size. You can also use this mode to create a blank border around the edge of the copy. Before using this mode, set the unit of measurement of the frame erase width in the Additional Functions menu. (See “Frame Erase Width Unit of Measurement,” on p. 3-26.) 1 Place your originals. 2 Press [Frame Erase].
4 Press [ [OK]. ] or [ ] to select the size of the original ➞ press You can select from A3, A4R, A4, A5R, and A5. ª ORIGINAL SIZE A4 5 Special Copying Features 2 Press [ ] or [ ] to set the frame erase width for all four borders ➞ press [OK]. You can also use 0 - 9 [numeric keys] to enter the frame erase width, and [Clear] to clear your entry. ª ALL FR.SAME WD 4mm The Standby display appears and an asterisk (*) appears on the LCD display indicating that the Frame Erase mode is set.
NOTE • For more information about entering the copy quantity, see “Specifying the Required Number of Copies,” on p. 1-24. • The paper size is displayed according to the original size you have selected in step 4. 7 Press [Start]. Copying starts. Book Frame Erase The Book Frame Erase mode erases dark borders, as well as center and contour lines that appear if you are copying facing pages in a bound original onto a single sheet of paper.
2 Press [ ] or [ ] to select ‘BOOK FRAME’ ➞ press [OK]. FRAME ERASE ¨ BOOK FRAME 3 2 Press [ ] or [ ] to select the size of the original when it is open ➞ press [OK]. You can select from A3, A4R, A4, A5R, and A5. Special Copying Features ¨ FACING-PAGE SIZE A4 4 Press [ ] or [ ] to set the book frame erase width for all four borders ➞ press [OK]. You can also use 0 - 9 [numeric keys] to enter the frame erase width, and [Clear] to clear your entry. ¨ ALL FR.
5 Press [ ] or [ ] to set the frame erase width for the center of the bound original ➞ press [OK]. ¨ ERASE WIDTH CNTR 10mm The Standby display appears, and an asterisk (*) appears on the LCD display indicating that the Book Frame Erase mode is set. 6 Press 0 - 9 [numeric keys] to enter the desired copy quantity (1 to 99). 100% * AUTO A4 A TEXT O5 NOTE • For more information about entering the copy quantity, see “Specifying the Required Number of Copies,” on p. 1-24.
Binding Hole Erase The Binding Hole Erase mode erases the shadows that appear on copies from binding holes on originals. Before using this mode, set the unit of measurement of the frame erase width in the Additional Functions menu. (See “Frame Erase Width Unit of Measurement,” on p. 3-26.) IMPORTANT • Do not place originals with binding holes into the feeder, otherwise the originals may be damaged.
4 Press [ [OK]. ] or [ ] to set the binding erase width ➞ press You can also use 0 - 9 [numeric keys] to enter the binding erase width, and [Clear] to clear your entry. © ERASE WIDTH LEFT 18mm NOTE • You can set the binding erase width from 3 mm to 20 mm (3/16" to 13/16"). • The default setting is 18 mm (3/4"). • If you are using the numeric keys to enter the value, be sure to enter a leading zero to specify one-digit value. (e.g., If you want to specify “4 mm,” enter as “04 mm.
6 Press [Start]. Copying starts. NOTE • If you place the original on the platen glass of the iR2016 model, or if the machine cannot detect the original size, specify the original size after pressing [Start]. ORIGINAL SIZE A4 2 Special Copying Features Press [ ] or [ ] to select the size ➞ press [Start]. • To cancel all settings and return the machine to the Standby display, press [Reset]. • To cancel copy jobs, see “Canceling a Copy Job,” on p. 1-19.
2 on 1 Combination The 2 on 1 Combination mode enables you to automatically reduce two originals to fit onto one side or both sides of a selected paper size. Original Copy Special Copying Features 2 1 1 2 2 IMPORTANT The 2 on 1 Combination mode cannot be used with the following modes: - Two-Page Separation - Original Frame Erase - Book Frame Erase - Different Size Originals NOTE • If the optional Duplex Unit-A1 is attached, you can make two-sided copies from one-sided originals.
1 Place your originals. 2 Press [2 on 1]. « 2ON1 OFF 2 Special Copying Features 3 Press [ ] or [ ] until ‘ON’ appears ➞ press [OK]. « 2ON1 ON 4 Press [ [OK]. ] or [ ] to select the size of the original ➞ press You can select from A3, A4R, A4, A5R, and A5. « ORIGINAL SIZE A4 5 Press [ ] or [ ] to select the paper size ➞ press [OK]. You can select the size of the paper loaded in the paper drawers or stack bypass.
IMPORTANT You cannot use Auto Paper Selection in the 2 on 1 Combination mode. NOTE The machine automatically selects the copy ratio depending on the selected paper size. However, you can also set the copy ratio using the preset ratio or zoom by percentage mode. Press 0 - 9 [numeric keys] to enter the desired copy quantity (1 to 99). 100% * A3 A TEXT 2 Special Copying Features 6 O5 NOTE For more information about entering the copy quantity, see “Specifying the Required Number of Copies,” on p. 1-24.
Different Size Originals The Different Size Originals mode enables you to copy different size originals with the same or different width together. IMPORTANT • If your machine is the iR2016 model, the Feeder (DADF-P1) should be attached to use this mode. • If paper of the same size as the original is not loaded in the paper drawer or stack bypass, the machine automatically reduces, enlarges, or separates the copied image to fit the paper loaded in the paper drawer or stack bypass.
1 Place your originals. 100% AUTO A4 A TEXT O1 IMPORTANT If your model is the iR2016, place your originals in the feeder to use the Different Size Originals mode. 2 Press [Different Size Originals]. DIFFER. SIZE ORIG OFF 3 Press [ ] or [ ] to select ‘SAME WIDTH’ or ‘DIFFERENT WIDTH’ ➞ press [OK]. DIFFER. SIZE ORIG SAME WIDTH An asterisk (*) appears on the LCD display indicating that the Different Size Originals mode is set.
4 Press 0 - 9 [numeric keys] to enter the desired copy quantity (1 to 99). 100% * AUTO A4 A TEXT O5 NOTE For more information about entering the copy quantity, see “Specifying the Required Number of Copies,” on p. 1-24. Special Copying Features 2 5 Press [Start]. Copying starts. NOTE • To cancel all settings and return the machine to the Standby display, press [Reset]. • To cancel copy jobs, see “Canceling a Copy Job,” on p. 1-19.
Two-Sided Copying The Two-Sided mode enables you to make two-sided copies from one-sided or two-sided originals, or make one-sided copies from two-sided originals. NOTE • If you are copying in the Two-sided mode, align the top edge of the original with the back edge of the platen glass (by the arrow in the top left corner), or with the back edge of the feeder.
IMPORTANT Make sure to place originals with a horizontal (landscape) orientation, such as A4R and A5R, horizontally. If these originals are placed vertically, the back side of the original is copied upside down. NOTE • If there is an odd number of originals, the back side of the last copy is left blank. (The machine’s counter does not count the blank page as a copy.
4 Press [ ] or [ ] to set the orientation of the two-sided copies (‘BOOK TYPE’ or ‘CALENDAR TYPE’) ➞ press [OK]. ¥ TYPE OF OUTPUT BOOK TYPE Details of each item are shown below: The front and back sides of the copy will have the same top-bottom orientation. ‘CALENDAR TYPE’: The front and back sides of the copy will have opposite top-bottom orientations. The Standby display appears, and an asterisk (*) appears on the LCD display indicating that the 1 to 2-Sided mode is set.
NOTE • If you place the original on the platen glass of the iR2016 model, or if the machine cannot detect the original size, specify the original size after pressing [Start] in step 5. ORIGINAL SIZE A4 [Start]. Press [ ] or [ ] to select the size ➞ press • To cancel all settings and return the machine to the Standby display, press [Reset]. • To cancel copy jobs, see “Canceling a Copy Job,” on p. 1-19.
1 Place your originals ➞ press [Two-Sided]. If necessary, see the screen shot in step 2 of “1 to 2-Sided,” on p. 2-21. Press [ [OK]. ] or [ ] until ‘2 > 2-SIDED’ appears ➞ press TWO-SIDED ¦ 2 > 2-SIDED 3 2 Press [ ] or [ ] to set the orientation of the two-sided originals (‘BOOK TYPE’ or ‘CALENDAR TYPE’) ➞ press [OK]. ¦ TYPE OF ORIGINAL BOOK TYPE Details of each item are shown below: ‘BOOK TYPE’: The front and back sides of the original have the same top-bottom orientation.
4 Press [ ] or [ ] to set the orientation of the two-sided copies (‘BOOK TYPE’ or ‘CALENDAR TYPE’) ➞ press [OK]. ¦ TYPE OF OUTPUT BOOK TYPE Details of each item are shown below: ‘BOOK TYPE’: The front and back sides of the copy will have the same top-bottom orientation. ‘CALENDAR TYPE’: The front and back sides of the copy will have opposite top-bottom orientations.
2 to 1-Sided This mode automatically turns over two-sided originals to make one-sided copies on different sheets of paper. Original Copies IMPORTANT Make sure to place originals with a horizontal (landscape) orientation, such as A4R and A5R, horizontally. If these originals are placed vertically, the back side of the copy is copied upside down. NOTE If the feeder is attached, it is recommended that you set the originals in the feeder when copying in 2 to1-Sided mode.
3 Press [ ] or [ ] to set the orientation of the originals (‘BOOK TYPE’ or ‘CALENDAR TYPE’) ➞ press [OK]. ¤ TYPE OF ORIGINAL BOOK TYPE Details of each item are shown below: ‘BOOK TYPE’: The front and back sides of the original have the same top-bottom orientation. ‘CALENDAR TYPE’: The front and back sides of the original have opposite top-bottom orientations.
Book to 2-Sided This mode enables you to make two-sided copies from facing pages, or from the front and back sides of a page in bound originals, such as books and magazines. ■ Left/Right Two-Sided This setting makes two-sided copies from facing pages. Original Copies Special Copying Features 2 ■ Front/Back Two-Sided This setting makes two-sided copies from the front and back sides of a page.
IMPORTANT • The Book to 2-Sided mode cannot be used with the Different Size Originals mode. • If you select ‘FRT/BACK 2-SIDED’, the front side of the first two-sided page and the back side of the last two-sided page are left blank. (The machine’s counter does not count the blank pages as copies.) • Place your original on the platen glass. The Book to 2-Sided mode cannot be used when the original is placed in the feeder. NOTE You cannot select the free size paper loaded in the stack bypass.
4 Press [ ] or [ ] to select the desired type of two-sided layout (‘L/R 2-SIDED’ or ‘FRT/BACK 2-SIDED’) ➞ press [OK]. § TYPE OF BOOK L/R 2-SIDED Details of each item are shown below: The facing pages of a book or bound original are copied onto the front and back sides of a single sheet of paper. ‘FRT/BACK 2-SIDED’: The front and back sides of the left page, or the front and back sides of the right page, are copied onto the front and back sides of a single sheet of paper.
NOTE • If you place the original on the platen glass of the iR2016 model, or if the machine cannot detect the original size, specify the original size after pressing [Start]. ORIGINAL SIZE A4 Press [ ] or [ ] to select the size ➞ press [Start]. • To cancel all settings and return the machine to the Standby display, press [Reset]. 2 Special Copying Features • To cancel copy jobs, see “Canceling a Copy Job,” on p. 1-19.
Customizing Settings 3 CHAPTER This chapter explains how to change the machine's default settings and customize them. Copy Settings Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Specifying Copy Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Image Direction Priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Copy Settings Table The following items can be stored or set in the Copy Settings menu. Additional Function Available Settings Applicable Page COPY SETTINGS Customizing Settings 3 IMAGE DIR PRIORTY OFF, ON p. 3-5 AUTO ORIENTATION ON, OFF p. 3-6 IMAGE QUALITY TEXT, PHOTO, TEXT/PHOTO p. 3-8 DENSITY AUTO, MANUAL (9 steps, 5) p. 3-9 ZOOM RATIO PRESET RATIO (DIRECT 100%, 141% A4 ➞ A3, 200% MAX., 50% MIN., 70% A3 ➞ A4), p. 3-11 MANUAL COPIES 1 – 99 STANDARD SETTINGS p.
NOTE • For instructions on setting the modes not described in this manual, refer to the other manuals listed in “Manuals for the Machine.” • The Copy Settings menu consists of a list of individual settings. Press [ ] or [ ] to scroll to the desired setting.
Specifying Copy Settings Standard Copy Settings refer to a combination of copy modes that the machine automatically applies when you turn ON the main power or when [Reset] is pressed. In this section, the procedure for changing the copy modes stored as the Standard Copy Settings are explained. NOTE • The Standard Copy Settings are applied when: [Reset] is pressed (except while copying). - the Auto Clear function works. - the operation in the Additional Functions menu is finished.
Image Direction Priority If is set to ‘ON’, the machine always copies an image in the same orientation as the original image. This is because the images on originals may be copied upside down, depending on the copy mode set. NOTE • The default setting is ‘OFF’. • If is set to ‘ON’, the copy speed is slower than normal. 1 Press [Additional Functions]. 3 2 Press [ ] or [ press [OK]. Customizing Settings ADD. FUNCTIONS 1.
4 Press [ ] or [ ] to select ‘OFF’ or ‘ON’ ➞ press [OK]. IMAGE DIR PRIORTY OFF The selected mode is set, and the LCD display returns to the menu. 5 [Stop] to return to the Standby display. Auto Orientation Customizing Settings 3 Press If is set to ‘ON’, the machine uses information, such as the size of the original and the copy ratio, to determine the most suitable orientation for the specified paper size and then automatically rotates the image, if necessary.
1 Press [Additional Functions] ➞ open the menu. If necessary, see the screen shots in steps 1 and 2 in “Image Direction Priority,” on p. 3-5. 2 Press [ ] or [ press [OK]. ] until appears ➞ COPY SETTINGS 2.AUTO ORIENTATION Customizing Settings 3 The menu appears. 3 Press [ ] or [ ] to select ‘ON’ or ‘OFF’ ➞ press [OK]. AUTO ORIENTATION ON The selected mode is set, and the LCD display returns to the menu.
Standard Image Quality You can set the standard image quality for copying. NOTE The default setting is ‘TEXT’. 1 Press [Additional Functions] ➞ open the menu. If necessary, see the screen shots in steps 1 and 2 in “Image Direction Priority,” on p. 3-5. Customizing Settings 3 2 Press [ ] or [ ➞ press [OK]. ] until appears COPY SETTINGS 3.STANDARD SETTINGS The menu appears. 3 Press [ ] or [ press [OK].
4 Press [ ] or [ ] to select ‘TEXT’, ‘PHOTO’, or ‘TEXT/ PHOTO’ ➞ press [OK]. IMAGE QUALITY TEXT The selected mode is set, and the LCD display returns to the menu. 5 Press [Stop] to return to the Standby display. 3 Customizing Settings Standard Density You can set the standard copy density. NOTE The default setting is ‘AUTO’. 1 Press [Additional Functions] ➞ open the menu. If necessary, see the screen shots in steps 1 and 2 in “Image Direction Priority,” on p.
3 Press [ ] until appears ➞ press [OK]. ] or [ STANDARD SETTINGS 2.DENSITY The menu appears. 4 Press [ [OK]. DENSITY Customizing Settings 3 ] to select ‘AUTO’ or ‘MANUAL’ ➞ press ] or [ AUTO ● If you selected ‘AUTO’: ❑ Proceed to step 5. ● If you selected ‘MANUAL’: ❑ Press [ ] or [ MANUAL -LT ] to set the desired standard copy density ➞ press [OK]. DK+ The selected mode is set, and the LCD display returns to the menu.
Standard Zoom Ratio You can set the standard zoom ratio. NOTE The default settings are ‘PRESET RATIO’ and ‘DIRECT 100%’. Press [Additional Functions] ➞ open the menu. If necessary, see the screen shots in steps 1 and 2 in “Image Direction Priority,” on p. 3-5. 2 Press [ ] or [ ➞ press [OK]. ] until appears COPY SETTINGS 3.STANDARD SETTINGS The menu appears. 3 Press [ [OK]. ] or [ ] until appears ➞ press STANDARD SETTINGS 3.
4 Press [ ] or [ ➞ press [OK]. ] to select ‘PRESET RATIO’ or ‘MANUAL’ If you want to select from the preset ratios, select ‘PRESET RATIO’. If you want to set the standard zoom ratio manually by 1% increments, select ‘MANUAL’. ZOOM RATIO PRESET RATIO 5 Customizing Settings 3 Press [ ] or [ ➞ press [OK].
NOTE You can set the zoom ratio from 50% to 200%. The selected mode is set, and the LCD display returns to the menu. 6 Press [Stop] to return to the Standby display. Standard Copy Quantity You can set the standard copy quantity. 1 Press [Additional Functions] ➞ open the menu. If necessary, see the screen shots in steps 1 and 2 in “Image Direction Priority,” on p. 3-5. 2 Press [ ] or [ ➞ press [OK]. ] until appears COPY SETTINGS 3.
3 Press [ ] or [ ] until appears ➞ press [OK]. STANDARD SETTINGS 4.COPIES The menu appears. 4 Press [ ] or [ ] to set the desired standard copy quantity ➞ press [OK]. You can also enter the standard quantity using 3 Customizing Settings COPIES 0 - 9 [numeric keys]. 1 The selected mode is set, and the LCD display returns to the menu. NOTE You can set the copy quantity from 1 to 99.
Auto Collate The Auto Collate mode enables automatic selection of the Collate (Offset Collate) mode when originals are placed in the feeder. This is helpful if you frequently make multiple sets of copies using the Finishing modes. NOTE The default setting is ‘OFF’. Press [Additional Functions] ➞ open the menu. 3 If necessary, see the screen shots in steps 1 and 2 in “Image Direction Priority,” on p. 3-5. 2 Press [ ] or [ ➞ press [OK].
4 Press [ ] or [ ➞ press [OK]. ] to select ‘OFF’, ‘COLLATE’, or ‘STAPLE’ If you do not want the machine to collate automatically, select ‘OFF’. If you want the machine to collate automatically, select ‘COLLATE’. If you want the machine to staple automatically, select ‘STAPLE’. AUTO COLLATE OFF The selected mode is set, the LCD display returns to the menu.
2 Press [ ] or [ ➞ press [OK]. ] until appears COPY SETTINGS 3.STANDARD SETTINGS The menu appears. Press [ [OK]. ] or [ ] until appears ➞ press 3 STANDARD SETTINGS 6.TWO-SIDED The menu appears. 4 Press [ ] or [ ] to select ‘OFF’, ‘1 > 2-SIDED’, ‘2 > 2-SIDED’, ‘2 > 1-SIDED’, or ‘BOOK > 2-SIDED’ ➞ press [OK]. TWO-SIDED OFF The selected mode is set, and the LCD display returns to the menu.
Standard Frame Erase You can set the standard Frame Erase mode. NOTE The default setting is ‘OFF’. 1 Press [Additional Functions] ➞ open the menu. If necessary, see the screen shots in steps 1 and 2 in “Image Direction Priority,” on p. 3-5. Customizing Settings 3 2 Press [ ] or [ ➞ press [OK]. ] until appears COPY SETTINGS 3.STANDARD SETTINGS The menu appears. 3 Press [ [OK].
4 Press [ ] or [ ] to select ‘OFF’, ‘ORG. FRAME ERASE’, ‘BOOK FRAME ERASE’, or ‘BINDING HOLE’ ➞ press [OK]. FRAME ERASE OFF The selected mode is set, and the LCD display returns to the menu. 5 Press [Stop] to return to the Standby display. 3 Customizing Settings Standard Two-Page Separation You can set the standard Two-Page Separation. NOTE The default setting is ‘OFF’. 1 Press [Additional Functions] ➞ open the menu.
3 Press [ ] or [ press [OK]. ] until <2-PAGE SEPARATION> appears ➞ STANDARD SETTINGS 8.2-PAGE SEPARATION The <2-PAGE SEPARATION> menu appears. 4 ] or [ ] to select ‘OFF’ or ‘ON’ ➞ press [OK]. 2-PAGE SEPARATION 3 Customizing Settings Press [ OFF The selected mode is set, and the LCD display returns to the menu. 5 Press [Stop] to return to the Standby display. Paper Drawer Selection You can set the standard paper drawer selection. NOTE The default setting is ‘AUTO’.
2 Press [ ] or [ ➞ press [OK]. ] until appears COPY SETTINGS 3.STANDARD SETTINGS The menu appears. 3 Press [ ] or [ press [OK]. ] until appears ➞ 3 Customizing Settings STANDARD SETTINGS 9.PAPER SELECT The menu appears. 4 Press [ ] or [ ] to select ‘AUTO’, ‘DRAWER 1’, ‘DRAWER 2’, ‘DRAWER 3’, or ‘DRAWER 4’ ➞ press [OK]. PAPER SELECT AUTO The selected mode is set, and the LCD display returns to the menu.
Sharpness The Sharpness mode enables you to make copies with a sharper or softer contrast. To reproduce text or lines with a sharper contrast, increase the sharpness level. To copy originals containing printed images or other halftones with a softer contrast, decrease the sharpness level. ■ Low If you make copies of an original containing halftones, such as a printed image, using the Photo mode, the moiré effect (a shimmering, wavy pattern) may occur.
■ High This setting enhances the edges of original images so that faint or fine text is reproduced with a sharper contrast. This setting is particularly suited for copying blueprints and faint pencil drawn images. Original Copy Adjustment Not Set The world’s coral reefs, where brilliantly colored fish and a myriad of other tropical creatures come together.
3 Press [ ] or [ press [OK]. ] to set the desired sharpness level ➞ You can also enter the standard sharpness level using SHARPNESS 0 - 9 [numeric keys] 5 The selected mode is set, and the LCD display returns to the menu. NOTE • You can set the sharpness in the range from 1 to 9. • ‘9’ is the lowest sharpness level and ‘1’ is the highest. Customizing Settings 3 To copy text or lines clearly, select a high sharpness level.
1 Press [Additional Functions] ➞ open the menu. If necessary, see the screen shots in steps 1 and 2 in “Image Direction Priority,” on p. 3-5. Press [ ] or [ press [OK]. ] until appears ➞ COPY SETTINGS 5.PAPER SIZE GROUP 3 The menu appears. 3 Press [ [OK]. ] or [ ] to select ‘A’, ‘AB’, or ‘INCHES’ ➞ press PAPER SIZE GROUP A The selected mode is set, and the LCD display returns to the menu.
Frame Erase Width Unit of Measurement You can set the unit of measurement for the frame erase width. NOTE The default setting is ‘mm’. 1 Press [Additional Functions] ➞ open the menu. If necessary, see the screen shots in steps 1 and 2 in “Image Direction Priority,” on p. 3-5. Customizing Settings 3 2 Press [ ] or [ press [OK]. ] until appears ➞ COPY SETTINGS 6.MM/INCH ENTRY The menu appears. 3 Press [ [OK].
Restoring the Default Copy Settings Modes that have been changed in Copy Settings (from the Additional Functions menu) can be restored to their default settings. (See “Copy Settings Table,” on p. 3-2.) NOTE The default setting is ‘NO’. Press [Additional Functions] ➞ open the menu. 3 If necessary, see the screen shots in steps 1 and 2 in “Image Direction Priority,” on p. 3-5. 2 Press [ ] or [ press [OK]. ] until appears ➞ COPY SETTINGS 7.INIT. COPY SET. The
3 Press [ ] or [ ] to select ‘OFF’ or ‘ON’ ➞ press [OK]. INIT. COPY SET. OFF ● To cancel initializing the Copy Settings: ❑ Select ‘OFF’. The LCD display returns to the Additional Functions menu. ● To restore to the default settings: ❑ Select ‘ON’. 3 Customizing Settings The Copy Settings are initialized, and the LCD display returns to the Additional Functions menu. 4 3-28 Press Specifying Copy Settings [Stop] to return to the Standby display.
Appendix 4 CHAPTER Combination of Copy Modes Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Combination of Copy Modes Chart : Combination Available : Combination Unavailable Copy Appendix 4 Modes Alread Prese y Set t zoom Zoom by perc e Autom atic De ntage nsity C Text ontrol Photo Text/P ho Auto P to aper S electio Stack n By Collate pass Offset C Staple ollating Reserv e Cop y The chart shows the available combinations of settings when you want to set more than one mode at a time.
: Combination Unavailable Copy Modes Alread Prese y Set t zoom Zoom by perc en Autom atic De tage nsity C Text ontrol Photo Text/P ho Auto P to a Stack per Selectio Byp n Collate ass Offset Co Staple llating Reserv e Cop y : Combination Available Modes to Be Set Two-Page Separation 2 on 1 Combination Original Frame Erase Book Frame Erase Binding Hole Erase Two-Sided Different Size Originals : Combination Available Copy : Combination Unavailable Modes Alread y Set Two-P ag 2 on 1 e Separatio n Comb in
: Combination Unavailable Copy Modes Alread y Set Two-P ag 2 on 1 e Separatio n Comb in Origin al Fram ation e Book F Erase ra Bindin me Erase g Hole Erase 1 to 2-S id 2 to 2-S ed ided 2 to 1-S Book to ided 2 Differe -Sided nt Size Origin als : Combination Available Modes to Be Set Appendix 4 Two-Page Separation 2 on 1 Combination Original Frame Erase Book Frame Erase Binding Hole Erase 1 to 2-Sided 2 to 2-Sided 2 to 1-Sided Book to 2-Sided Different Size Originals 4-4 Combination of Copy Modes Char
Index F 2 on 1 Combination, 2-15 Feeder, 1-3, 1-10, 1-16 Finishing functions, 1-42 Auto Collate, 3-15 Collate, 1-42, 1-44 Offset, 1-42, 1-44 Staple, 1-42, 1-45 Frame Erase, 2-5 Binding Hole Erase, 2-6, 2-12 Book Frame Erase, 2-6, 2-9 Original Frame Erase, 2-5, 2-7 Standard Frame Erase, 3-18 Unit of Measurement, 3-26 A Auto Collate, 3-15 Auto Orientation, 3-6 Available Combination of Functions, 4-2 C Canceling a Job, 1-19 Copy Quantity, 1-24 Standard Copy Quantity, 3-13 Copy Settings, 3-4 Copy Settings T
P Paper Drawer Selection, 3-20 Paper Selection, 1-26 Auto Paper Selection, 1-26 Manual Paper Selection, 1-28 Standard Paper Drawer Selection, 3-20 Paper Size Group, 3-24 Platen Glass, 1-10, 1-13 Preset Ratio, 1-37 R Appendix 4 Reserved Copying, 1-22 Restoring the Default Copy Settings, 3-27 S Sharpness, 3-22 Sleep mode, 1-3 Slide guides (feeder), 1-17 Standard Zoom Ratio, 3-11 T Two-Page Separation, 2-2 Standard Two-Page Separation, 3-19 Two-Sided Copying, 2-21, 3-16 1 to 2-Sided, 2-21 2 to 1-Sided, 2
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.V. Bovenkerkerweg 59-61 1185 XB Amstelveen, The Netherlands CANON FRANCE S.A.S. 17,quai du Président Paul Doumer 92414 Courbevoie Cedex, France CANON (U.K.) LTD.
