Online Manual Preview Guide English
Contents Using This Online Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Trademarks and Licenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Search Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 General Notes (Preview). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using This Online Manual Symbols Used in This Document Touch-enabled Device Users (Windows) Symbols Used in This Document Warning Instructions that, if ignored, could result in death or serious personal injury caused by incorrect operation of the equipment. These must be observed for safe operation. Caution Instructions that, if ignored, could result in personal injury or material damage caused by incorrect operation of the equipment. These must be observed for safe operation.
Trademarks and Licenses • Microsoft is a registered trademark of Microsoft Corporation. • Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries. • Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries. • Internet Explorer is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.
Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.
copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. 3. Grant of Patent License.
limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License. 8. Limitation of Liability.
* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
This distribution may include materials developed by third parties. Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
---- Part 6: Cisco/BUPTNIC copyright notice (BSD) ----Copyright (c) 2004, Cisco, Inc and Information Network Center of Beijing University of Posts and Telecommunications. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. LEADTOOLS Copyright (C) 1991-2009 LEAD Technologies, Inc. CMap Resources ----------------------------------------------------------Copyright 1990-2009 Adobe Systems Incorporated. All rights reserved. Copyright 1990-2010 Adobe Systems Incorporated. All rights reserved.
Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above c
Enter keywords in the search window and click (Search). You can search for target pages in this guide. Entry example: "(your product's model name) load paper" Search Tips You can search for target pages by entering keywords in the search window. Important • This function may not be available in some countries/regions. Note • The displayed screen may vary.
Note • The displayed screen varies depending on your product. • Searching for Application Functions Enter your application's name and a keyword for the function you want to learn about Example: When you want to learn how to print collages with My Image Garden Enter "My Image Garden collage" in the search window and perform a search • Searching for Reference Pages Enter your model name and a reference page title* * You can find reference pages more easily by entering the function name as well.
General Notes (Preview) When using Canon imagePROGRAF Preview (hereafter Preview), the following restrictions apply. Please familiarize yourself with them before using it. • Preview supports imagePROGRAF Printer Driver Ver. 3.95 and 4.00 or later for Windows. • This guide primarily provides explanations using the screens that are displayed when you use the Windows 10 operating system (hereafter, Windows 10).
The Features of Preview The main features of Preview are as follows. • While viewing this screen, you can adjust layout settings of a document created with application software. • You can not only adjust layout settings but also your changes will be instantly applied on the preview screen, and you can print the preview screen as it is seen. Note • The media type, image size, detailed media settings, and the printer settings can cause the actual print output to differ from the Preview settings.
Starting Preview Follow the procedure below to start the Preview. 1. Open Print dialog box. From the application software, select the printer setup menu to open the Print dialog box. Note • Normally, select Print from the File menu. 2. Click Open Preview When Print Job Starts check box. On the Main sheet, click the Preview before printing check box. Note • If Free Layout is selected in Page Layout, you cannot select Preview before printing.
Preview main window is displayed.
Description of Preview Screen Preview Main Window Dialog Area 19
Preview Main Window The Preview main window consists of a menu bar, tool bar, preview area, dialog area and status bar. Note • You can use the View menu to show or hide the tool bar. Menu Bar This allows you to select menus required for operations. Tool Bar This allows you to select tool buttons required for major operations. Print Executes printing. You can also execute this with Print from the File menu. First Page Go to the first page. You can also select this from Go to Page in the View menu.
Previous Page Go to the previous page. You can also select this from Go to Page in the View menu. Next Page Go to the next page. You can also select this from Go to Page in the View menu. Last Page Go to the last page. You can also select this from Go to Page in the View menu. Help Displays the Web manual. You can also display this from Help in the Help menu. Preview Area You can check the settings you made in this area. Dialog Area This allows you to set the print conditions and perform a print job.
Status Bar This shows the message, Pages and Output Size.
Dialog Area You can select the layout and print on the center. Media Type/Paper Source/Paper Size You can confirm the information that is set. Layout Selection You can print which conserves paper by selecting the layout. For more information about Layout Selection, see "Printing with Selecting the Layout." Center Originals Across Roll You can print on the center of the media loaded in the printer. For more information about Center Originals Across Roll, see "Print on the Center.
No Spaces at Top or Bottom You can save paper on not to feed roll paper for the empty spaces when the print data contains spaces at the top or bottom. For more information about No Spaces at Top or Bottom, see "Not Print Spaces at the Top/Bottom." Note • Available only if rolls are selected in Paper Source. Print Button Click the button to start printing. Cancel Button Click the button to stop printing. Printer Information You can confirm the information acquired from the printer.
Various Preview Features Enlarge/Reduce the screen display Moving a Page Using the ruler Priority setting for rotating 90 degrees Printing with Selecting the Layout Print on the Center Not Print Spaces at the Top/Bottom 25
Enlarge/Reduce the screen display You can enlarge or reduce the screen display when you select Zoom from the View menu. Setting Details Fit Screen Display all. Fit to Width Display to the width of the paper. Reduce Display at half of the standard size. Standard Display at the standard size. Enlarge Display with the double of the standard size. Enlarge More Display with the triple of the standard size.
Moving a Page You can move a page to display when you select Go to Page from the View menu. Setting Details First Page Go to the first page. Previous Page Go to the previous page. Next Page Go to the next page. Last Page Go to the last page. Go To Page Go to the specified page. Note • You can also move a page by clicking on the tool bar.
Using the ruler You can confirm the layout with using the ruler. • Switching the ruler Show/Hide In the View menu, select Ruler to switch the ruler Show/Hide. • Changing the ruler unit You can set the ruler unit when you select Units from the View menu. Setting Details mm Use mm as the ruler unit. inch Use inches as the ruler unit.
Priority setting for rotating 90 degrees You can select Rotate 90 Degrees If Possible or Use Driver Settings from the Options menu. Setting Details Rotate 90 Degrees If Possible Rotates pages in portrait orientation 90 degrees before printing. Pages are only rotated if they can fit lengthwise across the roll. Use Driver Settings Follows printer driver settings when determining whether to rotate pages.
Printing with Selecting the Layout You can print which conserves paper by selecting the layout. 1. Select layout. In Layout Selection, click the layout button to use. Button Details Upper Button Turn at the position of . Turn at the position of .
Button Details Left Button Turn at the position of . Turn at the position of . Lower Button Note • Right Button or Left Button can be selected only when the rotated pages can fit lengthwise across the roll. • By clicking Right Button or Left Button, you can save paper by printing in landscape orientation on roll paper. • You can select only Upper Button or Lower Button if Cut Sheet is selected. Button Details The button is selected currently. The button can be selected.
Button Details The button can not be selected. 2. Click the Print button. Printing on the selected layout begins.
Print on the Center You can print on the center of the media loaded in the printer. 1. Select Center Originals Across Roll. Click the Center Originals Across Roll check box on. 2. Click the Print button. Printing on the center begins. Note • Available only if rolls are selected in Paper Source.
Not Print Spaces at the Top/Bottom You can save paper on not to feed roll paper for the empty spaces when the print data contains spaces at the top or bottom. 1. Select No Spaces at Top or Bottom. Click the No Spaces at Top or Bottom check box on. 2. Click the Print button. Printing on the settings with no spaces at top or bottom begins.
