Canon imagePROGRAF Print Utility Guide Version 1.0 Canon Inc.
About the Canon imagePROGRAF Print Utility The Canon imagePROGRAF Print Utility is an application software specially for the iPad for printing PDF data using an iPF printer. - PDF format files can be printed. Work Required Before Use The following work needs to be performed in advance before using the Canon imagePROGRAF Print Utility. 1. Connect to the network Check that the iPad, wireless router, and iPF printer are connected to the same network.
2. Download the Canon imagePROGRAF Print Utility Download the Canon imagePROGRAF Print Utility from the App Store. <> - Download requires registration for an App Store account. - Canon imagePROGRAF Print Utility can be downloaded for free; however, transmission fees for connecting to App Store apply. - Check the details given in the App Store for more information on the supported operating systems and supported models.
Example of the operation for starting the utility: Tap -> Tap Open In -> Tap Open in iPF Print 3. Tap Printer Setting. 4. Tap + in the screen that opens. - If the printer you want to use is already registered, tap the printer name here to select it and proceed to step 7.
. The printers are detected and displayed in a list. Tap the printer you want to use to select it. - Printers that are connected to the same network as the wireless router are detected. 6. Tap the printer name of the printer you want to add. Set the printer name as needed on the screen that is displayed and then tap OK. - You can register multiple printers by repeating steps 1 to 5.
7. Tap Print. Printing begins. - You can only print the current page. You cannot print multiple pages at the same time. - Pages are printed at the page size of the PDF file. If the size of the paper loaded in the printer is smaller than the page size of the PDF file, part of the image might not be printed. - If you want to change the print settings, tap .
Usage Cautions Take note of the following cautions when using the Canon imagePROGRAF Print Utility. - If you change the HP-GL/2 setting on the printer control panel, problems such as the position of the image being shifted or part of the image not being printed may occur. Always set the following items in GL2 Settings on the control panel to the printer default values.
■ Trademarks - Canon, the Canon logo, and imagePROGRAF are trademarks or registered trademarks of CANON INC. - iPad is a trademark of Apple Inc., registered in the U.S. and other countries. - App Store is a service mark of Apple Inc. ■ Copyright - Duplicating all or part of the content of this manual without permission is prohibited. ■ Notices - The content of this manual is subject to change without notice.
