User Manual Please read this manual before operating this scanner.
FCC REGULATIONS (For 120V model) International ENERGY STAR® Office Equipment Program Check Reader, Model M112010/M112020/M112030/M112040/M112050/M112060/M112100/M112120 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• Passports, licenses, or other certificates or documents issued by government officials or agencies Trademarks • Canon and the Canon logo are registered trademarks, of Canon Inc. in the United States and may also be trademarks or registered trademarks in other countries. • imageFORMULA is a trademark of CANON ELECTRONICS INC. • Microsoft, Windows, Windows 7, Windows 8.1 and Windows 10 are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries.
Packaging: What Is in the Box? Make sure that you have everything shown below. Check every item you have removed from the box. If any items are missing, contact your local authorized Canon dealer. Disc Card Guard AC Adapter Power Cord*1 CR-150/CR-120 Warranty Card*2 USB Cable Setup & Operation Guide *1 The power cord varies, according to the country of purchase. *2 For the United States and Canada only.
Preparation Before Use This chapter describes how to prepare the scanner to scan documents. IMPORTANT • To have the device drivers installed automatically when the computer recognizes the CR-150/CR-120, the software needs to be installed before the CR-150/CR-120 is connected to the computer. • If you connect the computer and turn ON the CR-150/CR-120 before installing the software, the following wizard screen appears.
IMPORTANT Checking Your Operating Environment • If you use the USB interface that was provided as standard with your computer: • Use the most recently available USB 2.0 driver provided by Microsoft. Contact your local authorized Canon dealer for more detailed information. • Not all USB interfaces provided as standard with personal computers are guaranteed. Contact your local authorized Canon dealer for more detailed information.
Installing the Scanning Utility Installing the Software Follow the instructions below to install the Scanning Utility and the dedicated driver. The following software applications are provided on the website. There are 3 usable software applications. For the latest software support information, go to the Products page on the Canon website. NOTE The dedicated scanner driver is installed after the Scanning Utility has been installed.
Connect the scanner and the computer peripherals Connecting the Scanner to a Computer Connect the scanner and the computer peripherals with the USB cable provided or a Hi-Speed USB 2.0 cable. The way to connect the scanner to your computer is with a USB cable. CAUTION USB Hub* • Do not turn OFF the scanner or remove the interface cable when an application is running. • Turn OFF the computer and the scanner before changing the cable.
Wired LAN Connection Connecting the Power Cord Ethernet connection (CR-150N/120N only) Connect the power cord. Make sure to use only the power cord provided with the scanner. Allows the use of this scanner from other computers connected to the network. Prepare a LAN cable separately. LAN Port WARNING When connecting the power cord, follow these precautions. Failure to do so may cause a fire or electrical shock. • Never grasp the power plug when your hands are wet.
B C Turning ON and OFF the Power Follow the procedures below to turn the scanner power ON and OFF. Turn ON your computer. Windows recognizes the CR-150/CR-120 as new hardware, and installation starts automatically. Turning ON the Power A To turn ON the scanner, press the Power Button. (Windows 7) NOTE The CR-150/CR-120 will be registered as “CANON CR-150 USB” or “CANON CR-120 USB” in the Imaging Device directory. When you turn ON the power, the Power Button flashes slowly and then turns solid blue.
Turning OFF the Power A Press and hold the Power Button to turn off the power. CAUTION For your safety, disconnect the power plug from the power outlet if you are not using the scanner for a long period of time. NOTE The scanner’s auto power off setting is enabled by default, and the scanner will turn off automatically if it is not operated for 4 hours. For details on how to disable this setting, see “Auto Power OFF Settings” on p.
INTRODUCTION Thank you for purchasing the Canon Check Reader CR-150/CR-120. Please read this manual thoroughly before using the machine in order to familiarize yourself with its capabilities, and to make the most of its many functions. Unless otherwise noted, CR-150 is used for both the CR-150 and the CR-150N models, and CR-120 is used for the CR-120, CR-120N, and the CR-120 UV models, throughout this manual.
Table of Contents Rear View............................................................................... 23 Exterior Dimensions ..................................................................... 24 Remove and attach the Eject Stopper ......................................... 24 Preparing the Ink Cartridge .......................................................... 25 About the Ink Cartridge .......................................................... 25 Setting the Ink Cartridge .........................
Troubleshooting ................................................................................. 54 When the Scanner Is Not Recognized ......................................... 54 Network Trouble........................................................................... 54 Clearing Paper Jams ................................................................... 55 Feeding Trouble........................................................................... 57 When the Scanned Image Is Not Normal ...............
Important Safety Instructions ■ Handle the scanner with care. Avoid shock and vibration to the scanner caused by reckless handling. If you suspect the scanner has been accidentally damaged, turn OFF the Power immediately and disconnect the power cord from the power outlet. Contact your local authorized Canon dealer or service representative to have the scanner serviced. ■ Before you move the scanner, always turn OFF the power and disconnect the power cord from the power outlet.
■ When you remove the power cord, grip it by the power plug head. Never attempt to disconnect the power cord from the power outlet by pulling on the power cord. Doing so may damage or expose the cord’s internal wiring, and cause a fire or electrical shock. ■ Keep the area around the power outlet clear of all obstacles so you can disconnect the power cord easily at all times. ■ Never spill water or volatile solutions (alcohol, benzene, paint thinner) into the scanner.
• Do not place heavy objects on the AC adapter or power cord. Do not place the adapter or cords in an area where they are likely to be stepped on. • Do not use the power cord while it is bundled. • Never pull directly on the power cord. To remove the plug from the outlet, grasp the plug directly and remove it from the outlet. • Keep the area around the power plug clear of articles so that the power plug can be disconnected in an emergency. • Use only the AC adapter provided with the product.
Moving the Scanner When you move the CR-150/CR-120, hold it firmly with both hands and carry it carefully. Do not hold the scanner by the eject stopper or the Card Guard. The scanner weighs approximately 3.2 kg (7.05 lb) .
Introduction to the CR-150/CR-120 Compact Size This chapter describes the features of the CR-150/CR-120 scanner, what comes packaged in the box, and the names and functions of parts on the scanner. Supports Black-and-White (Binary) and Grayscale Output Reads MICR Characters Features of the CR-150/CR-120 A magnetic head is used to scan MICR characters.
Drop-Out Color This function enables drop-out scanning of a specific color in the document. Imprinter Is Standard Equipment An imprinter mechanism, which prints text (5 lines) or a bitmap on documents as they are scanned, comes standard equipped with the scanner. The imprinter’s ink cartridge is not included, and must be purchased separately. (See “About the Ink Cartridge,” on p. 25.) Placing Additional Documents You can place additional documents while the machine is scanning.
Part Names This section describes the names and functions of each part. Before you connect the CR-150/CR-120, familiarize yourself with its parts and their functions. Front View Left Maintenance Cover Open this cover to clear paper jams or to clean the scanner. Top Cover Magnetic Swipe Reader (MSR) (Option) Operation Buttons Power Button Press this button to turn on the scanner. Press and hold this button to turn off the power.
Ultrasonic Sensor When this sensor detects overlapping documents and spacing between documents, the scanner judges that double feed occurred. Magnetic Head for MICR Reads MICR characters that have been printed with magnetic ink. Scanner Unit This unit scans the documents. Built-in Nozzle Cleaning Unit Ink Cartridge Ink cartridge is not included. Purchase the ink cartridge separately. (See “About the Ink Cartridge,” on p. 25.
Rear View Ink Disposal Tank Pocket Rear Card Slot LAN Port (CR-150N/120N only) Used for Ethernet connection. USB Hub Connect a Hi-Speed USB 2.0 compatible cable. This port is not found on certain models. In the case of bus power, it is capable of supplying up to 250mA per port. (See “Connect the scanner and the computer peripherals,” on p. 8.) Air Vent Power Connector Connect the power cord provided with the scanner to this connector.
Exterior Dimensions Remove and attach the Eject Stopper Units: millimeters (units in parenthesis are inches) The Eject Stopper can be extended or removed as shown in the figure. 360.4 mm (14.2") (with the eject stopper open) Adjust the stopper in accordance with the document. 298.5 mm (11.8") 56 mm (2.2") If the document exceeds 228 mm (8.98"), remove the eject stopper. 170 mm (6.7") 238.2 mm (9.4") When scanning is finished, push the Eject Stopper into the joint portion of the stopper to attach.
A Preparing the Ink Cartridge Remove the Top Cover. This section describes how to prepare the ink cartridge so that you can use the imprinter to print text or a bitmap on scanned documents. About the Ink Cartridge The ink cartridge is not included with the scanner. Purchase an ink cartridge separately, as shown below.
C Remove the ink cartridge from its bag. Ink Jet Nozzle Tag Contacts E Place the ink cartridge shown in the diagram below. IMPORTANT Do not touch the ink cartridge contacts. This can cause a bad electrical contact and reduced print quality. D Grasp the tag and then peel off the tape covering the ink jet nozzle. CAUTION Do not touch the electrical contact on the carriage. Doing so may cause a malfunction. NOTE IMPORTANT Do not use more than one cartridge by rotation.
F Push the ink cartridge in the direction of the arrow until it clicks into place. IMPORTANT Make sure that the ink cartridge is securely in place. G H Close the Nozzle cleaning Unit. Carefully replace the Top Cover.
Software This chapter describes how to use the Scanning Utility and the Ranger. B Click [Scanning Utility for CR-120&150]. C Start the Scanning Utility. How to Use the Software This section describes how to start up the Scanning Utility so that you can use the scanner. Read the Help files for the Scanning Utility for information on how to use it. How to Use the Scanning Utility This section describes the procedure for using the Scanning Utility.
NOTE IMPORTANT The basic operation of the Scanning Utility is noted in the Scanning Utility help file. On the [Help] menu, click [Help] to view the explanation. Confirm that your scanner is correctly connected to the computer, and that the scanner and computer are both turned on. B Select a connection method. Select Scanner A Select [Select Scanner] from the [File] menu. [Auto] Searches for a scanner and connects to the first scanner found.
Scanning Methods A NOTE Select [Scanner Setting] from the [File] menu. For information about the settings for the scan conditions, click [Help] on the Settings dialog box to open the Help file. C The Settings dialog box appears. B Set the scan conditions and click [OK]. 30 Select the scanning method from the [File] menu and start scanning.
D How to Download the Ranger When scanning is finished, click [Exit] on the [File] menu to quit the Scanning Utility. About the Ranger Silver Bullet Technology’s Ranger Transport API software, allowing it to be easily integrated into existing systems or be mixed and matched with a wide range of leading check processing software. A Turn ON your computer, and start Windows. IMPORTANT Be sure to Log On as the administrator. B Download usable software from the Canon Website.
B Uninstalling the Software Click [Uninstall a program]. This section describes how to uninstall the Scanning Utility and the Ranger. IMPORTANT • Be sure to Log On as the Administrator. • The procedure in Windows 8.1/10 is different from the ones described in this manual. Refer to the Windows 8.1/10 “Help and Support Center” to uninstall the software. A Click the Start button, and then click [Control Panel]. The [Programs and Features] dialog box appears.
IMPORTANT • If you uninstall the “Scanning Utility for CR-120/CR-150” you also need to uninstall the “Canon Driver for CR-120/CR-150.” • If you uninstall the Ranger, select the “Ranger for CR-120/CR-150.” D The Confirm File Deletion dialog box appears. If you selected “Canon Driver for CR-120/CR-150,” the above dialog box appears. E Click [Yes], and the uninstaller starts. Follow the instructions on the screen to finish uninstalling the software.
Network Settings (CR-150N/120N only) A Network settings can be configured in the settings screen of this scanner. NOTE Click the Start button, and then click [All Programs], [Canon CR-150] or [Canon CR-120], and [Canon imageFORMULA Utility]. imageFORMULA Utility starts. [IP Address] This is an identifier assigned to each computer, network device, and other devices that are connected to the network. [DHCP] Automatically assigns an IP address to a computer connecting to the network.
[Scanner Name] If DHCP is not checked, you can input and configure the IP address, Subnet Mask, and Default Gateway. Set an original name for the scanner so that it can be correctly identified on the network. [Subnet Mask] Set the Subnet Mask of the scanner. NOTE [Default Gateway] • Scanner Name must be 1 to 15 characters in length. The following arbitrary characters can be entered.
B How to confirm the IP address Click [CANON CR-150 (or CR-120) USB] and click [Properties]. Scanner properties are displayed. The imageFORMULA Utility network settings are displayed when the scanner and the computer are connected via USB. IMPORTANT Log On to Windows as an Administrator. A Click the Start button, and then click [All Programs], [Canon CR-150] or [Canon CR-120], and [Canon imageFORMULA Utility]. imageFORMULA Utility starts. C The IP address can be confirmed in the IP address field.
Scanner Name WEB MENU The first two characters are displayed as "CR" and the "CR" is followed by "MAC Address". EX. CR112233445566 "112233445566" is the examples of MAC Address. Password Setting canoncr150 IP Address --- DHCP ON Subnet Mask --- Default Gateway --- MAC Address Filtering OFF Use mDNS ON Network settings can be viewed and changed by connecting to the scanner's "WEB MENU" Network Settings Screen.
NOTE [Initialize] [Initialize] screen is displayed. For details on the admin password, see “imageFORMULA Utility [Password Setting]” on p. 35. C [Scanner Name Setting] The Home screen is displayed. A B [Scanner Name] A Set an unique name for the scanner that will be used so that it can be correctly identified on the network. [OK] B Click [OK] to send settings to the scanner. [Scanner Name Setting] [Scanner Name Setting] screen is displayed. [Network Setting] [Network Setting] screen is displayed.
[mDNS Setting] • When searching for scanners on the network to select a scanner with Scanning Utility, the Scanner Name is displayed here. For details, see “How to Use the Scanning Utility” on p. 28 [Network Setting] A A B C D B [mDNS] A Check (ON) to automatically search scanners. E NOTE [DHCP] A Check (ON) to automatically assign the IP address of the scanner. [IP Address] B Set the IP address of the scanner. [Subnet Mask] C Set the Subnet Mask of the scanner.
[MAC Address Filtering] [Password Setting] A B C A B C D [MAC Address Filtering] A Check (ON) to enable MAC Address Filtering, and to register a computer for controlling the scanner. [MAC Address] B Up to 5 computers can be registered. [OK] C Click [OK] to send settings to the scanner. The admin password for logging into "WEB MENU" can be set and changed. [Current Password] A Enter the current admin password. [New Password] B Enter the new password.
[Initialize] NOTE The initial values of each item in WEB MENU are as follows. A Scanner Name [Initialize] A The scanner's network settings are reset to initial values (factory default). 41 The first two characters are displayed as "CR" and the "CR" is followed by "MAC Address". EX. CR112233445566 "112233445566" is the examples of MAC Address.
B How to check the version information You can check the version information of the scanner. A Click Version information is on page. 3. A B button while the Home screen is displayed. see “How to open the WEB MENU and Log On” on p. 37 [Version] A The scanner's device version information is displayed. [No.] B The serial number of the scanner is displayed. NOTE • Click • Click button to proceed to the next page. button to return to the previous page.
Document Feeding and Scanning This chapter describes precautions regarding documents that can be handled on this scanner and scanning operations. Follow these guidelines when you prepare a document for scanning: • If the document exceeds 228 mm (8.98"), remove the eject stopper. (See “Remove and attach the Eject Stopper,” on p. 24.) • Before scanning documents that contain pasted artwork, make sure that the ink or paste is thoroughly dry.
Envelope Wrinkled or creased paper Carbon backed paper Curled paper Coated paper or fax recording paper Torn paper Extremely thin paper Paper with clips or staples Paper with binding holes You can also scan the envelope. When using separation OFF mode, you can scan an envelope with thickness up to 0.5 mm (0.02") or weight up to 413 g/m2 (111 lb bond). NOTE • Disable the double feed detection function. (See “Using Ultrasonic Double Feed Detection,” on p. 45.
Using Ultrasonic Double Feed Detection Placing Documents The double feed detection function that the scanner is equipped with uses the penetration of ultrasonic waves to detect when two or more documents are fed at the same time. If false detections happen too often, disable the double feed detection function. Note the following points when placing documents on the scanner. • Place the document so that the side to be scanned faces the side shown in the figure below.
Scan Procedure Document Feeding and Scanning A B C This section describes how to load and scan documents. CAUTION • Avoid wearing loose fitting clothing, dangling jewelry, long ties, or long hair that could become entangled with moving parts, especially the rollers that feed paper through the scanner. If such objects become entangled, immediately disconnect the power plug from the power outlet. • Check the paper stack and remove all clips, staples, pins, or any other type of metal or plastic fastener.
Scan Batch to Printer A Click [Scan Batch to Printer] from the [File] menu. B Select Simplex or Duplex, and then click [Start Scanning]. • You can also start scanning with pressing the Start Button. F Scanning starts. When printing with the imprinter, ink may get on the leading edge of the document because the documents are ejected onto the printed surface.
A Loading cards About the Card Guard Orient the front side of the card toward the left, and insert the card straight into the card slot. When scanning plastic cards, use of card guard is recommended. Attach the card guard to the back of the unit (Rear Card Slot) as shown in the figure below. B When the scanner detects the card, release the card, and use the application program to start scanning. When you use an application program to start scanning, the card is fed and scanning starts.
Magnetic card scanning (Option) CAUTION When scanning a magnetic card, use the Magnetic Swipe Reader (MSR). Compatible Magnetic Swipe Reader (MSR): 1732C003 Scan the cards one at a time according to the following procedure: Place the magnetic stripe of the magnetic card against the reading area of the magnetic sensor, and swipe the card in the direction of the arrow. Use the application program to check the scanning results. • Keep the area around the rear card slot clear of objects.
Separation OFF Mode Auto Power OFF Settings Use this separation OFF mode when you want to scan the following documents: • Thick documents • Documents that contain two or more pages together as one document • Documents that have a rough surface • Duplicate forms that have sticky edges Feed these documents one by one and press the Separation OFF Mode Button. The CR-150/CR-120 includes an Auto Power OFF function.
C Example (CR-150N/120N): Select or clear the [Turn off automatically after 4 hours] check box. Example (CR-150/120/120UV): D 51 Click [OK] to close the scanner properties.
Language settings for Magnetic Swipe Reader (MSR):(Option) Example (CR-150/120/120UV): The CR-150/CR-120 includes the Magnetic Swipe Reader (MSR) function (Option). When this function is enabled, you can select the MSR language. To enable or disable this setting, follow the procedure below. IMPORTANT Log On to Windows as an Administrator. A Click the Start button, and then click [All Programs], [CANON CR-150] or [CANON CR-120], and [Canon imageFORMULA Utility]. imageFORMULA Utility starts.
Example (CR-150N/120N): NOTE The [HID] check box is displayed when you are using a USB connection. D Click [OK] to close the scanner properties.
Troubleshooting This chapter describes the problems that might occur in the CR-150/ CR-120 and how to remedy them. Cause When the Scanner Is Not Recognized Cause The Scanning Utility is not installed. Network Trouble Remedy Install the Scanning Utility before connecting the scanner to the computer. (See “Setting Up the Scanner,” on p. 5.) Cause Common errors that occur while connecting to the network as well as their causes and remedies are explained here.
Cause and Remedy Check Canon imageFORMULA Utility and set the correct IP address. Other Causes The IP address might already be in use by another device. Check Canon imageFORMULA Utility and set the correct IP Address. For details on how to confirm the IP address of the scanner, see “How to confirm the IP address,” on p.
D Press the Open Button, and push the Left Maintenance Cover open to the left. NOTE E F If the above procedure does not clear the paper jam, perform the following to remove the jammed document. C Pull the Open Button, and pull the Right Maintenance Cover open to the right. 56 Remove the paper that has jammed. Close the Left Maintenance Cover. Make sure that it is completely closed until you hear a click.
G Close the Right Maintenance Cover. Make sure that it is completely closed until you hear a click. Feeding Trouble If the document is not fed properly or the detection functions do not work properly, remedy the problem by checking the following conditions. 57 Condition A paper jam has occurred. Cause and Remedy • Check to make sure that the size and thickness of the document are within the supported range of the scanner, and if the quality of the paper is appropriate.
Condition Card Jam. Condition Documents get dirty when using the imprinter. Cause and Remedy • Open the Left Maintenance Cover to remove the card. • Press and hold the Start button, then jammed card will be ejected. Cause and Remedy Ink from the imprinter has been placed on the feed path. Clean the ink off the feed path. (See “Cleaning the Ink Jet Nozzles,” on p. 66 and “Cleaning the Feed Path,” on p. 60.) Condition A double feed error often occurs.
The driver or application does not run correctly. When the Scanned Image Is Not Normal If the document cannot be scanned correctly even if the scan conditions are adjusted, the driver or the application may not be functioning correctly. Reinstall the driver or application. For details on how to install the driver, see “Installing the Software,” on p. 7. For details on how to install the application, see the applications instruction manual.
Maintenance This chapter describes how to clean and maintain the scanner. Daily Cleaning To ensure high-quality image scanning, regularly clean your CR-150/ CR-120 as described below. CAUTION • Before you clean the scanner, turn OFF the scanner and computer, and disconnect the power cord from the power outlet. Otherwise, it may cause an electrical shock. • Never clean the scanner with any kind of organic solvent, such as alcohol, benzene, or paint thinner.
D IMPORTANT If you notice paper dust in the feed path when you open the Maintenance Cover, clean it out with a clean dry cloth or cotton swabs. B Press the Open Button, and push the Left Maintenance Cover open to the left. E C Close the Left Maintenance Cover. Make sure that it is completely closed until you hear a click. Wipe the feed path with a firmly wrung cloth, moistened slightly with water. Then, wipe off with a clean, dry cloth. Feed Path 61 Close the Right Maintenance Cover.
C Cleaning the Scanning Glass and Rollers If stripes appear on scanned images or if dirt appears on scanned documents, clean the scanning glass and rollers. Clean the scanning glass and rollers regularly. A Remove the Top Cover. D B Press the Open Button, and push the Left Maintenance Cover open to the left. Remove the Roller Cover. Pull the Open Button, and pull the Right Maintenance Cover open to the right.
E F Spin the rollers while wiping them clean with a firmly wrung cloth dampened with water. Use a clean dry cloth to clean the entire scanning glass. Scanning Glass There are 14 roller positions, as shown in the diagram below. ո չ շ վ ճ պ ս ջ ն ռ յ ձ G ղ մ NOTE • Use cotton swabs to clean the rollers. • Rollers in positions J, M, and N are turned by the roller in position L. Turn the roller in position L to wipe the rollers. • Rollers in positions A to C are replaceable.
H Replace the Roller Cover. I Close the Right Maintenance Cover. J Carefully replace the Top Cover. IMPORTANT If paper jams and double feeds (two papers being fed at the same time) still occur after cleaning the rollers, the rollers may be worn. The rollers need to be changed. Some rollers are replaceable. (See “Replacing the Rollers,” on p. 73.) If the rollers are not replaceable, contact your local authorized Canon dealer or service representative to have the scanner serviced.
B Cleaning the Magnetic Head If the magnetic head is dirty, then MICR characters cannot be scanned correctly. Periodically, clean the magnetic head with a commercially available audio head cleaner. A Use a commercially available audio head cleaner to clean the magnetic head. The magnetic head is located in the positions shown in the diagram below. Pull the Open Button, and pull the Right Maintenance Cover open to the right.
B Cleaning the Ink Jet Nozzles Ink that collects around the ink jet nozzles may stain your documents or cause the text or bitmap to appear as scratched. Clean the area around the ink jet nozzles periodically. Cleaning the ink jet nozzles is also efficient action when the printed text or bitmap becomes faint. A Use the Built-in Nozzle Cleaning Unit to remove the ink from around the ink jet nozzles. Swipe the ink cartridge 2 or 3 times on the Built-in Nozzle Cleaning Pad shown in the diagram below.
C Cleaning with the Cleaning Cards (United States Only) Pull the Eject Stopper. If a black stripe appears on the back-side of scanned images or if dirt appears on the paper documents upon scanning or for preventative measures, we recommend that you clean your Canon CR-Series scanner as needed with a cleaning card. Using a cleaning card will minimize the frequent cleaning as instructed in this manual. It is best to perform a cleaning at beginning or end of the day.
Check Path Cleaning NOTE Follow the procedures below to perform check path cleaning. A B Allow 1 to 2 minutes for the moisture on the Canon CR-Series scanner from the cleaning card to thoroughly dry before scanning documents. Confirm that the scanner is set to the cleaning mode. (See “Prepare for the Cleaning mode,” on p. 67) Card Path Cleaning Press the Separation OFF Mode Button. Follow the procedures below to perform card path cleaning.
C NOTE Insert the cleaning card (for Card Path Cleaning) into the Card slot . If you press the Function Button shortly in Step 2, the scanner is set to the Check Path Cleaning mode. In this case, the POWER LED is blinking and the Start LED is ON. (The light of the Function Button is off.) D E If you do not press and hold the Function Button long enough, the scanner recognizes that the button is pressed just once. (For details on how to Check Path Cleaning, see “Check Path Cleaning,” on p.
Maintenance A Remove the Top Cover. B Open the Nozzle Cleaning Unit. Make the following adjustments to maintain scanning quality. Replacing the Ink Cartridge The ink cartridge needs to be replaced if the printed text becomes scratchy or faint even if you have cleaned the ink jet nozzle. Replace the ink cartridge according to the following procedure below. IMPORTANT • The ink disposal tank must be replaced when the ink cartridge is replaced. (See “Replacing the Ink Disposal Tank,” on p. 71.
C Replacing the Ink Disposal Tank Push the ink cartridge backward, and then remove the ink cartridge. When the following conditions appear, you have to replace the ink disposal tank according to the following procedure. • When the ink cartridge is replaced. • When clumpy ink appears on the ink disposal tank as shown below. The replacement ink disposal tank is not included with the scanner. Purchase an ink disposal tank, as shown below.
B Remove the ink disposal tank. C Attach the ink disposal tank. D Close the Ink Disposal Tank Pocket. Ink Disposal Tank WARNING Do not print without the ink disposal tank. Doing so may cause a malfunction. NOTE • Be careful not to get dirty with ink. • When you discard the ink disposal tank, put it in the plastic bag in the box of the ink disposal tank.
Replacing the Rollers IMPORTANT When rollers are worn, paper jams and double feeds tend to occur. You can replace the rollers (Pickup Roller, Feed Roller, and Separation Roller) according to the following procedure. The exchange roller kit is not included with the scanner. Purchase an exchange roller kit separately, as shown below. As shown in the figure, release hook A (left bottom) and hook B (right top toward the back) of the roller cover, and then lift up the cover.
D E While pushing up the Separation OFF Lever, pinch the edge of the Feed Roller and the fixing lever, and then remove the roller. Pinch the Separation Roller at the rim and the fixing lever, and then remove it. Fixing Lever Fixing Lever F NOTE Pinch the Pickup Roller at the rim and the fixing lever, and then remove it. If the Feed Roller (Separation Roller) is not removed easily because of the fixing lever position, turn the Feed Roller in clockwise direction by hand.
G I Attach the Pickup Roller. Align the notch on the roller axis with the hole on the roller. IMPORTANT Attach the Feed Roller. Align the notch on the roller axis with the hole on the roller. IMPORTANT Push down the roller until it clicks into place. Push down the roller until it clicks into place. H J Attach the Separation Roller. Align the notch on the roller axis with the hole on the roller. Adjust the Adjustment Dial to 6. For more information, see “Adjusting the Separation Roller Gap,” on p.
Adjusting the Separation Roller Gap CAUTION If double feed should occur too often, adjust the Separation Roller gap according to the following procedure. A Do not use the Adjustment Dial any other time except when adjusting the Separation Roller gap. Turning the Adjustment Dial too much may damage the scanner. Pull up the Adjustment Dial Cover. Adjustment Dial Turn the dial to the left to widen the gap, and turn it to the right to narrow the gap. B Adjust the Adjustment Dial.
Scanning resolution (primary scan lines x secondary scan lines) Specifications Document type Scanner Specifications Type Desktop sheet feed Document size Height: 60 to 108 mm (2.4" to 4.3") Length: 90 to 245 mm (3.5" to 9.6") (You can scan documents up to 2,000 mm (78.7") long by setting the scanner to the Long Document mode.) Thickness: 0.08 to 0.20 mm (0.003" to 0.
AC Adapter Specifications Other functions Automatic paper size detection, Ultrasonic double feed detection, Dropout color, Deskew Model number MG1-5039 Dimensions 203.6 mm (H) x 170 mm (W) x 238.2 mm (D) (8.0" (H) x 6.7" (W) x 9.4" (D)) Input AC 100-240V 50/60Hz 1.06-0.6 A Output DC24V 2.0A Weight CR-150: Approximately 3.2 kg (7.05 lb) CR-120: Approximately 3.2 kg (7.05 lb) Weight Approximately 0.2 kg (0.
Option Magnetic Swipe Reader (MSR) (Product code: 1732C003) This is the optional item to scan the magnetic card.
Index A Eject Stopper ...................................................................22 Exterior Dimensions ........................................................24 Adjustment Dial ......................................................... 22, 76 Adjustment Dial Cover .................................................... 22 Air Vent ........................................................................... 23 Amount loaded ................................................................
O Troubleshooting ...............................................................54 Turning OFF the Power ...................................................11 Turning ON the Power .....................................................10 Operating Environment ..................................................... 6 Operation Buttons ........................................................... 21 U P Ultrasonic Sensor ............................................................22 Unpacking the scanner ....
CANON ELECTRONICS INC. 3-5-10 SHIBAKOEN, MINATO-KU, TOKYO 105-0011, JAPAN CANON U.S.A. INC. ONE CANON PARK, MELVILLE, NY 11747, U.S.A. CANON CANADA INC. 8000 MISSISSAUGA ROAD, BRAMPTON, ONTARIO L6Y 5Z7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59, 1185 XB AMSTELVEEN, THE NETHERLANDS CANON AUSTRALIA PTY. LTD. BUILDING A, THE PARK ESTATE, 5 TALAVERA ROAD, MACQUARIE PARK, NSW 2113, AUSTRALIA CANON SINGAPORE PTE. LTD. 1 FUSIONOPOLIS PLACE, #15-10, GALAXIS, SINGAPORE 138522 CANON INDIA PVT.
