BUBBLE JET PRINTER Quick Start Guide Table of Contents Preface 1 Shipping Materials 1 Introduction 1 Setting Up Preparing the Printer 2 Connecting the Printer to the Computer 2 Installing the Print Head 4 Loading Paper 7 Installing the Printer Driver 8 Aligning the Print Head Basic Operations The following ink tanks are compatible with this printer. For details on ink tank replacement, refer to ”Print Head Maintenance” in this guide. QA7-2749-V01 12345678 ©CANON INC.
Exif Print This printer supports Exif 2.2 (also called “Exif Print”). Exif Print is a standard for enhancing the communication between digital cameras and printers. By connecting to an Exif Print-compliant digital camera, the camera’s image data at the time of shooting is used and optimized, yielding extremely high quality prints.
Preface Shipping Materials Thank you for purchasing a Canon Bubble Jet Printer. Check that all the following items are in the box. If anything is missing or is damaged, contact your Canon Authorized Dealer or Sales Representative. Printer Setup Software & User’s Guide CD-ROM Quick Start Guide Print Head 4 Ink Tanks * Cables should be purchased separately according to your computer. For details on cable specifications, refer to page 2.
Setting Up 1 Preparing the Printer 1 Place the printer on a flat surface. 2 Remove the tape from the printer as shown. The tape position is subject to change. 2 Connecting the Printer to the Computer Use either a USB cable or parallel printer cable. You cannot connect the computer to the printer using both the parallel cable AND the USB cable. USB cable • Windows XP, Windows Me, Windows 2000, Windows 98 • Mac OS 8.
Follow the steps below to install the printer driver correctly. 1 Ensure the printer and the computer are Figure A switched off. 2 Connect the cable. Figure A shows the USB cable connection and Figure B shows the printer cable (parallel) connection. Figure B If the Add New Hardware Wizard or Found New Hardware Wizard screen appears when carrying out the following operations, click Cancel and turn off the computer.
3 Installing the Print Head • Never attempt to plug the power cord into the power outlet or unplug the power cord when your hands are wet. • Never damage, modify, stretch, or excessively bend or twist the power cord. Do not place heavy objects on the power cord. • Never use any power supply other than the standard power supply available in the country of purchase. Using the incorrect voltage and frequency could cause a fire or electric shock. • Always push the plug all the way into the power outlet.
6 Remove the protective cap from the print head. • Do not touch the print head nozzles or electrical contacts. • Do not attempt to reattach the protective cap once it has been removed. print head nozzles electrical contacts 7 Place the print head in the holder. print head Be careful not to touch any parts inside the printer. print head holder 8 Lock the print head into place by lowering the lever. Do not touch the lock lever once the print head has been installed.
Protective cap 3 Hold the ink tank as shown in the diagram and remove the protective cap. ink port • Do not squeeze the sides of the ink tanks as this may cause the ink to leak out and stain your clothes and hands. • Do not touch the ink port. • Do not attempt to reattach the protective cap once it has been removed. 4 Insert the yellow ink tank into the righthand slot. Press the top until it clicks into place. 5 Use the same procedure to install the other ink tanks in their appropriate slots.
4 Loading Paper Loading A4 (Letter) Size Plain Paper 1 Open the front cover. paper thickness lever 2 Move the paper thickness lever at the top of the print head holder to the left position. Close the front cover. Set the paper thickness lever to the left when using plain paper, to the right when using thick paper. Refer to the User’s Guide for information on loading envelopes and other media. paper rest 3 Pull out the paper rest and the output tray completely as shown.
5 Installing the Printer Driver Installing the Printer Driver – Windows • Do not disconnect the cable or remove the CD-ROM during the installation. The driver cannot be correctly installed. • The screens below refer to Windows XP installation. Screen may differ depending on the operating system you are using. • When installing the printer driver in Windows XP, Windows 2000 or Windows NT 4.0, log on to the system as a member of the Administrators group.
3 Place the Setup Software & User’s Guide CD-ROM in the CD-ROM drive. • If the CD-ROM does not run automatically, click Start and select My Computer, then double-click the CD-ROM icon. For non-XP Windows, doubleclick My Computer in the Windows screen, then double-click the CD-ROM icon. • If the language selection screen appears, select a language, then click the Next button. 4 Follow the instructions displayed on screen. When the screen shown on the left is displayed, click Install.
7 If you want to install the application software, click Install. Follow the instructions on screen to install the application software. When the message “Software installation is completed.” appears, click OK. 8 Click Exit. • The User’s Guide is also installed when you install the printer driver. To view the User’s Guide, double-click the User’s Guide short-cut icon on the desk top. • If a message prompting you to restart the computer appears, click Yes.
7 Click Install. Wait for the installation to finish. If the above message appears, check that there are no unsaved documents, then click the Continue button. If a document needs to be saved, click Cancel then save the document. After saving the document, begin again from step 4. 8 Click Restart. The computer restarts. 9 Select Chooser in the Apple Menu. 10 Click the icon for the printer you are using and close Chooser. Before you use the printer, you must carry out print head alignment on page 15.
4 Double-click i560 200.pkg. 5 Enter an administrator name and a password, then click OK. 6 Click Continue. 7 Read the License Agreement and click Continue, then click Agree. 8 Select a destination to where you want to install the printer driver, and click Continue. 9 Click Install. 10 A message asking for your confirmation to restart your computer appears on the screen. Read the message, then click Continue Installation. Software installation will start. 11 Software installation is complete.
6 Aligning the Print Head This operation must be carried out when using the printer for the first time. Aligning the print head positions allows you to print without shifts in the color registration. Aligning the Print Head – Windows 1 Click Start and select Control Panel, Printers and Other Hardware, and then Printers and Faxes. For non-XP Windows, click Start, then select Settings, Printers. 2 Click the icon for your printer.
7 Look at the print-out. From the patterns in Column A, select the most even, least irregular pattern and enter the number. 8 In the same way, one by one, select the most even patterns printed with the least irregularities from each of Columns B to K, enter their numbers, and click OK. If it is difficult to pick the best pattern on Column H, pick the setting that produces the least noticeable vertical white stripes. Less noticeable white stripes More noticeable white stripes 9 Click Cancel.
Aligning the Print Head – Macintosh For Mac OS X users, refer to the Printer Driver Guide for Mac OS X for instructions on how to align the print head. 1 Select Page Setup in the File Menu. 2 Click Utilities. 3 Select Test Print from the menu and click Print Head Alignment. 4 Check that paper is loaded in the printer and click OK. It takes about 60 seconds to start printing. If the pattern is not printed successfully, open the front cover and ensure that the ink tanks are correctly installed.
6 In the same way, one by one, select the most even patterns printed with the least irregularities from each of Columns B to K, enter their numbers and click Send. If it is difficult to pick the best pattern on Column H, pick the setting that produces the least noticeable vertical white stripes. Less noticeable white stripes More noticeable white stripes 7 Click Cancel. This completes the printer setup. The printer is now ready to use. . Click OK to perform even more detailed adjustments.
Basic Operations • If you detect smoke, unusual smells or strange noises around the printer, immediately switch the printer off and always unplug the printer. Contact your local Canon service representative. • To avoid injury, never put your hand or fingers inside the printer while it is printing. Printing with Windows Adjusting the print settings according to your needs allows you to produce better quality prints. In this section, we will use WordPad for the purpose of explanation.
Basic Print Settings For the best print quality, specify the minimum requirement settings in the Main tab. To get the best results, ensure you select the type of media loaded in the printer when printing on paper other than plain paper. (6) (1) (2) (3) (4) (5) (1) Media Type Select the type of media loaded in the printer. (2) Print Quality Select one option from High, Standard and Draft. Select Custom to set the print quality manually.
Printing with Macintosh Adjusting the print settings according to your needs allows you to produce better quality prints. Printing 1 Open the Page Setup dialog box in your application. On the File menu, click Page Setup. Check the application’s users manual for the actual procedures. 2 Specify the page setup. For details, refer to “Page Setup” on page 20. 3 Open the Print dialog box in your application to print the document. On the File menu, click Print.
Page Setup Use the Page Setup dialog box to specify the paper size settings. Select paper size you wish to use. Basic Print Settings For the best print quality, specify the minimum requirement settings in the Print dialog box. To get the best results, ensure you select the type of media loaded in the printer when printing on paper other than plain paper. (3) (1) (2) (1) Media Type Select the type of media loaded in the printer. (2) Print Mode Select the type of document you want to print.
Print Head Maintenance If Blurring Occurs or If a Specific Color Does Not Print Perform print head cleaning to improve the print quality. Ensure that the printer is turned on and follow the instructions below. • Windows Open the printer driver settings screen and click the Maintenance tab. Click Cleaning. See page 13 for details on how to open the setting screen. • Macintosh Open the Page Setup dialog box and click Utilities. Click Cleaning.
Appendix Printing Photographs Directly from a Digital Camera Connecting a Canon digital camera with the Bubble Jet Direct function to the printer allows you to print recorded images directly without using a computer. Connect the USB cable that came with your digital camera. Media Types for Digital Camera When you connect a digital camera, you can use the following media: Digital Camera Setting Media Type Card #1 Photo Paper Pro 4” x 6” / 101.6 ×152.4 mm Card #2 Photo Paper Plus Glossy 4” × 6” / 101.
Notes on Handling the USB Interface (for Windows Users) If installation of the printer driver does not proceed as instructed in this Quick Start Guide, there may be a problem with the USB driver installation. Try reinstalling the printer driver. Reinstalling If you cannot proceed beyond the Printer Port screen: 1 Click Cancel. 2 When the Terminate Installation screen is displayed, click OK. 3 4 5 6 Click Exit, then remove the CD-ROM. Turn the printer off. Restart the computer.
Applications Included in the CD-ROM Package Easy-PhotoPrint (Windows/Macintosh) You can make a Borderless Printing easily and quickly, just by selecting a photograph taken with a digital camera and the paper type on which to print. You can also use simple editing features such as trimming and image rotation. Internet Explorer 4.0 or later must be installed for Easy-PhotoPrint. It is Exif Print (Exif 2.2) compatible.
Exif Print This printer supports Exif 2.2 (also called “Exif Print”). Exif Print is a standard for enhancing the communication between digital cameras and printers. By connecting to an Exif Print-compliant digital camera, the camera’s image data at the time of shooting is used and optimized, yielding extremely high quality prints.
BUBBLE JET PRINTER Quick Start Guide Table of Contents Preface 1 Shipping Materials 1 Introduction 1 Setting Up Preparing the Printer 2 Connecting the Printer to the Computer 2 Installing the Print Head 4 Loading Paper 7 Installing the Printer Driver 8 Aligning the Print Head Basic Operations The following ink tanks are compatible with this printer. For details on ink tank replacement, refer to ”Print Head Maintenance” in this guide. QA7-2749-V01 12345678 ©CANON INC.
