Instruction Guide

i350/i250 Series
Color Bubble Jet Printer
Start Here
Connect one end of a USB cable (not
included)
to the computer, the other to
the printer.
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
Continue with Step 6
on side two.
USB Port
USB Cable
Protective cap
Insert the black ink tank
(BCI-24 Black)
k
into the slot on the right. Press down
until the ink tank locks into place
Repeat the procedure for the color ink
tank (BCI-24 Color), inserting it into the
remaining slot.
Close the front cover.
Pull out the paper rest and the output
tray (
i
350 only).
Remove the black ink tank (BCI-24 Black)
from its package and pull off the orange
protective cap.
NOTE:
To avoid spilling ink, do not touch
the bottom of the tank once you have
removed the protective cap.
Click
R
emove the print head from its package
.
Raise the gra
y
lock lever on the printer
.
Slide the
p
rint head into the holder until
it is securel
y
seated
.
Lower the lever until it locks into
p
lace
.
Tear at notch to o
p
e
n
Electrical
contacts
NOTE:
Do not touch the electric
a
l cont
a
cts
on the back and bottom of the
p
rint head
.
Remove the orange
p
rotective ca
p
.
Open the front cover. Remove the packing
material from the print head holder.
Remove all shipping tape from the printer.
NOTE:
The serial number is located to the
to register the product.
Shipping Tape
Serial number
Print head
holder
Packing
material
Carefully remove all items from the box.
50
Series
Color Bubble Jet Printer
Documentation
and Software Kit
Power Cord
i
350/
i
250 Series Print Head
Ink Tanks
BCI-24 Color
NOTE:
These instructions are for both the
i
350 Series Color Bubble Jet and the
i
250
Series Color Bubble Jet printers
. Some of
the graphics used may vary slightly from
the product you have purchased.
NOTE:
USB cable not included.
2
Prepare the Printer
1
Unpack the Printer
3
Inst
a
ll the Print He
ad
4
Install the Ink Tanks
5
Connect the Printer
To Your Computer