Advanced User Guide E
Introduction Before Starting to Shoot, Be Sure to Read the Following To avoid botched pictures and accidents, first read the “Safety Precautions” (= 22) and “Handling Precautions” (= 25). Also, read this manual carefully to ensure that you use the camera correctly. Refer to This Manual while Using the Camera to Further Familiarize Yourself with the Camera While reading this manual, take a few test shots and see how they come out. You can then better understand the camera.
Item Check List Before starting, check that all the following items are included with your camera. If anything is missing, contact your dealer. Camera (with eyecup and body cap) Strap Battery Pack LP-E17 (with protective cover) Battery Charger LC-E17 zz The camera does not come with the Software CD-ROM, an interface cable or HDMI cable. zz If you purchased a Lens Kit, check that the lenses are included. zz Be careful not to lose any of the above items.
Quick Start Guide 1 (2) (1) Insert the battery (= 37). zz Upon purchase, charge the battery to start using (= 35). (2) (1) 2 Insert the card (= 37). (1) zz With the card’s label facing toward the back of the camera, insert it into the card slot. (2) 3 White index Red index Attach the lens (= 47). zz Align the lens’s white or red mount index with the camera’s mount index of the same color to attach the lens.
4 Set the lens’s focus mode switch to (= 47). 5 Set the power switch to <1>, then set the Mode Dial to (Scene Intelligent Auto) (= 70). zz All the necessary camera settings will be set automatically. 6 Flip out the LCD monitor (= 40). 7 Focus on the subject (= 50). zz When the LCD monitor displays the date/time/zone setting screen, see page 43. zz Look through the viewfinder and aim the viewfinder center over the subject.
8 Take the picture (= 50). 9 Review the picture. zz Press the shutter button completely to take the picture. zz The image just captured will be displayed for approx. 2 sec. on the LCD monitor. zz To display the image again, press the button (= 101). zz To shoot while looking at the LCD monitor, see “Shooting with the LCD Monitor (Live View Shooting)” (= 180). zz To view the images captured so far, see “Image Playback” (= 101). zz To delete images, see “Erasing Images” (= 310).
Compatible Cards The following cards can be used with the camera regardless of capacity. If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera (= 66). zz SD/SDHC*/SDXC* memory cards * UHS-I cards supported. Cards that Can Record Movies When recording movies, use a high-capacity card with ample performance (fast enough writing and reading speeds) for the movie recording size.
Chapters Introduction 2 Getting Started and Basic Camera Operations 34 Basic Shooting and Image Playback 69 Setting the AF and Drive Modes 103 Image Settings 114 Advanced Operations for Photographic Effects 146 Flash Photography 168 Shooting with the LCD Monitor (Live View Shooting) 180 Shooting Movies 217 Handy Features 259 Image Playback 280 Post-Processing Images 328 Wireless Features 344 Customizing the Camera 445 Reference 459 Software Start Guide / Downloading Images to a
Contents by Purpose Shooting zz Shoot automatically Î= Î 69 - = 100 (Basic Zone modes) zz Shoot continuously Î= Î 112 (i Continuous shooting) zz Take a picture of yourself in a group Î= Î 206 (j Self-timer) zz Freeze the action Î= Î 149 (s Shutter-priority AE) zz Blur the action zz Shoot with effects of your choice Î= Î 76 (Creative Assist) zz Blur the background Î= Î 152 (f Aperture-priority AE) zz Keep the background in sharp focus zz Adjust the image brightness (exposure) Î= Î 160 (Exposure c
Image Quality zz Shoot with image effects matching the subject Î= Î 121 (Picture Style) zz Make a large-size print of the picture Î= Î 115 (73, 83, 1, D) zz Take a lot of pictures Î 115 (7a, 8a, b) Î= AF (Focusing) zz Change the point of focus Î= Î 108 (S AF point selection) zz Shoot a moving subject Î= Î 83, = 84, = 106 (AI Servo AF) Playback zz View the images on the camera Î= Î 101 (x Playback) zz Search for pictures quickly Î= Î 281 (H Index display) = 285 (I Image browsing) zz Rate images Î=
Wireless Features zz Send images to a smartphone Î= Î 349 (Communicate with smartphone) zz Send images to a computer Î= Î 378 (Use with software) zz Print pictures Î= Î 381 (Print from Wi-Fi printer) zz Share images online Î= Î 391 (Send images to a Web service) 11
Index to Features Power LCD Monitor zz Battery zz Using the LCD monitor (= 40) • Charging (= 35) zz LCD off/on button (= 272) • Installing/Removing (= 37) zz Brightness adjustment (= 262) • Battery level (= 42) zz Touch screen (= 63) • Checking battery information (= 460) zz Feature guide (= 55) zz Display level settings (= 51) zz Household power outlet (= 461) Recording Images zz Auto power off (= 41) zz Creating/Selecting a folder (= 263) Cards zz Installing/Removing (= 37) zz File numbe
Image Quality Flash zz Image-recording quality (= 115) zz Built-in flash (= 169) zz Picture Style (= 121) zz External flash (= 174) zz White balance (= 129) zz Flash function settings (= 175) zz Auto Lighting Optimizer (= 136) Live View Shooting zz Noise reduction for long exposures (= 139) zz Live View shooting (= 180) zz Noise reduction for high ISO speeds (= 138) zz Aspect ratio (= 192) zz AF operation (= 195) zz Lens aberration correction (= 141) zz AF method (= 197) zz Creative filters (
Playback Software zz Image review time (= 261) zz Software Start Guide (= 482) zz Single-image display (= 101) zz Software Instruction Manual (= 483) zz Shooting information (= 323) zz Index display (= 281) Wireless Features zz Image browsing (Jump display) (= 282) zz Communicate with smartphone (= 349) zz Magnified view (= 284) zz Auto send images to smartphones (= 362) zz Image rotation (= 287) zz Rating (= 288) zz Remote control (EOS Utility) (= 374) zz Movie playback (= 296) zz Slide show
Conventions in This Manual Icons in this Manual <6> : Indicates the Main Dial. : Indicate up, down, left, and right on the cross keys respectively. <0> : Indicates the Setting button. * In addition to the above, the icons and symbols used on the camera’s buttons and displayed on the LCD monitor are also used in this manual when discussing relevant operations and functionality.
Contents Introduction 2 Item Check List.....................................................................................3 Quick Start Guide.................................................................................4 Compatible Cards.................................................................................7 Chapters...............................................................................................8 Contents by Purpose.............................................................
Basic Shooting and Image Playback 69 Fully Automatic Shooting (Scene Intelligent Auto)..............................70 Full Auto Techniques (Scene Intelligent Auto)....................................74 Special Scene Mode...........................................................................78 Shooting Portraits...............................................................................79 Shooting Portraits with Smooth Skin Tone..........................................80 Shooting Group Photos.....
Matching the Light Source................................................................129 Adjusting the Color Tone for the Light Source..................................133 Auto Correction of Brightness and Contrast.....................................136 Highlight Tone Priority.......................................................................137 Setting Noise Reduction...................................................................
Using the Self-timer..........................................................................206 Shooting with the Touch Shutter.......................................................208 Taking a Self Portrait (Selfie)............................................................210 MF: Focusing Manually....................................................................212 Shooting Movies 217 Shooting Movies...............................................................................
Playing Back Movies........................................................................296 Editing a Movie’s First and Last Scenes...........................................299 Grabbing a Frame from 4K Movies or 4K Time-Lapse Movies.........301 Slide Show (Auto Playback).............................................................303 Playback on a TV..............................................................................305 Protecting Images.........................................................
Registering Multiple Connection Settings.........................................415 Wi-Fi Settings...................................................................................416 Bluetooth Settings............................................................................417 Changing the Nickname...................................................................418 Geotagging Images with GPS Information from Other Devices.......419 Changing or Deleting Connection Settings............................
Safety Precautions The following precautions are provided to prevent harm or injury to yourself and others. Make sure to thoroughly understand and follow these precautions before using the product. Warnings: Follow the warnings below. Otherwise, death or serious injuries may result. zz To prevent fire, excessive heat, chemical leakage, explosions, and electrical shock, follow the safeguards below: -- Do not use any batteries, power sources, or accessories not specified in the Instruction Manual.
zz Do not use the equipment where there is flammable gas. This is to prevent an explosion or a fire. zz If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the exposed internal parts. There is a possibility of an electrical shock. zz Do not disassemble or modify the equipment. High-voltage internal parts can cause electrical shock. zz Do not look at the sun or an extremely bright light source through the camera or lens. Doing so may damage your vision.
the cautions below. Otherwise, physical injury or Cautions: Follow property damage may result. zz Do not use or store the product in a high-temperature location such as inside a car under the hot sun. The product may become hot and cause burns. Doing so may also cause battery leakage or explosion, which will degrade the performance or shorten the life of the product. zz Do not carry the camera around when it is attached to a tripod. Doing so may cause an injury or an accident.
Handling Precautions Camera Care zz This camera is a precision instrument. Do not drop it or subject it to physical shock. zz The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult the nearest Canon Service Center. Wipe off any water droplets with a dry and clean cloth. If the camera has been exposed to salty air, wipe it with a clean, well-wrung wet cloth.
zz If the camera will not be used for an extended period, remove the battery and store the camera in a cool, dry, well-ventilated location. Even while the camera is in storage, press the shutter button a few times once in a while to check that the camera is still working. zz Avoid storing the camera where there are chemicals that result in rust and corrosion such as in a chemical lab. zz If the camera has not been used for an extended period, test all its functions before using it.
zz Do not store or use the card near anything that has a strong magnetic field, such as a TV set, speakers, or magnets. Also avoid places prone to having static electricity. zz Do not leave the card in direct sunlight or near a heat source. zz Store the card in a case. zz Do not store the card in hot, dusty, or humid locations.
Part Names (6) (7) (8) (9) (10) (11) (12) (8) (16) (17) (18) (19) (5) (4) (3) (2) (20) (21) (22) (1) (15) (14) (13) (23) (1) Lens mount (13) Mirror (2) Lens lock pin (14) Lens release button (3) Grip (15) Contacts (4) EF-S lens mount index (16) Remote control terminal (5) EF lens mount index (17) External microphone IN terminal (6) Shutter button (18) Serial number (7) Main Dial (19) Tripod socket (8) Strap mount (20) Card slot/Battery compartment cover (9) Built-in microph
(4) (5) (6)(7) (8) (9)(10)(11)(12)(13)(14) (16) (17) (18) (3) (2) (19) (1) (20) (21) (15) (1) LCD monitor/Touch screen Opens to the left about 180° and rotates up and down. (2) (Info) button (3) (Menu) button Used to display menu screens.
Mode Dial The Mode Dial includes the Basic Zone modes and Creative Zone modes. (1) (1) Basic Zone All you do is press the shutter button. The camera sets everything to suit the subject or scene for shooting.
(2) (2) Creative Zone These modes give you more control for shooting various subjects as desired.
Viewfinder Information Display (1) (2) (3) (4) (5) (6) (7) (8 ) (9) (11)(12) (14) (15)(16) (18) (10) (17) (13) (1) Focusing screen (2) Spot metering circle (3) AF point activation indicator (4) AF point (5) High-speed sync FE lock / FEB in-progress (6) AE lock / AEB in-progress (7) Warning icon (12) Shutter speed Bulb exposure (buLb) FE lock (FEL) Busy (buSy) Built-in flash recharging (buSy) No card warning (Card) Card error (Card) Card full warning (FuLL) Error code (Err) (8) ISO speed in
Battery Charger LC-E17 Charger for Battery Pack LP-E17 (= 35).
Getting Started and Basic Camera Operations This chapter describes preparatory steps before you start shooting and the basic camera operations. Attaching the Provided Strap (1) Pass the end of the strap through the camera’s strap mount eyelet (2) from the bottom. Then pass it (4) through the strap’s buckle as shown in the illustration. Pull the strap to (3) take up any slack and make sure the strap will not loosen from the buckle.
Charging the Battery 1 Remove the protective cover. zz Detach the protective cover provided with the battery. 2 Attach the battery. zz As shown in the illustration, attach the battery securely to the charger. zz To detach the battery, follow the above procedure in reverse. 3 Recharge the battery. LC-E17 For LC-E17 zz As shown by the arrow, flip out the battery charger’s prongs (1) and insert the prongs into a power outlet (2).
Tips for Using the Battery and Charger zz Upon purchase, the battery is not fully charged. Charge the battery before use. zz Recharge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually drain and lose its capacity. zz After recharging the battery, detach it and disconnect the charger from the power outlet. zz When not using the camera, remove the battery.
Installing and Removing the Battery and Card Load a fully charged Battery Pack LP-E17 into the camera. The camera can use an SD, SDHC, or SDXC memory card (sold separately). UHS-I Speed Class SDHC and SDXC memory cards can also be used. The captured images are recorded onto the card. zz Make sure the card’s write-protect switch is set upward to enable writing/ erasing. Installing the Battery and Card (2) (1) 1 Open the cover. zz Slide the lever as shown by the arrows and open the cover.
4 Close the cover. zz Press the cover until it snaps shut. zz When you set the power switch to <1>, the number of possible shots will be displayed on the LCD monitor. zz After opening the card slot/battery compartment cover, be careful not to swing it back any further. Otherwise, the hinge may break. zz The number of possible shots varies depending on the remaining capacity of the card, image-recording quality, ISO speed, etc.
4 Remove the card. zz Gently push in the card, then let go to eject it. zz Pull the card straight out. 5 Close the cover. zz Press the cover until it snaps shut. zz When the access lamp is lit or blinking, it indicates that images are being written to, read from, or erased from the card, or data is being transferred. Do not open the card slot/battery compartment cover. Also, never do any of the following while the access lamp is lit or blinking. Otherwise, it can damage the image data, card, or camera.
Using the LCD Monitor After you flip out the LCD monitor, you can set menu functions, use Live View shooting, shoot movies, or play back photos and movies. You can change the direction and angle of the LCD monitor. 1 Flip out the LCD monitor. 2 Rotate the LCD monitor. zz When the LCD monitor is swung out, you can rotate it up, down, or over 180° to face the subject. zz The indicated angle is only approximate. 180° 90° 175° 3 Face it toward you.
Turning on the Power If you turn on the power switch and the date/time/zone setting screen appears, see page 43 to set the date/time/zone. : The camera turns on. You can shoot movies (= 218). <1> : The camera turns on. You can shoot still photos. <2> : The camera is turned off and does not function. Set the power switch to this position when not using the camera. Automatic Sensor Cleaning zz Whenever you set the power switch to <1> or <2>, sensor cleaning will be performed automatically.
Battery Level Indicator When the power is turned on, the battery level will be indicated in one of the four levels. z: Battery level is sufficient. x: Battery level is low, but the camera can still be used. c: Battery will be exhausted soon. (Blinks) n: Recharge the battery. zz Doing any of the following will exhaust the battery faster: -- Pressing the shutter button halfway for a prolonged period. -- Activating the AF frequently without taking a picture. -- Using the lens’s Image Stabilizer.
Setting the Date, Time, and Time Zone When you turn on the power for the first time or if the date/time/zone have been reset, the date/time/zone setting screen will appear. Follow the steps below to set the time zone first. Set the camera to the time zone in which you currently live so that, when you travel, you can simply change the setting to the correct time zone for your destination, and the camera will automatically adjust the date/time.
zz For the menu function setting procedures, see = 59 - = 62. zz In step 3, the time displayed in [Time zone] is the time difference compared to Coordinated Universal Time (UTC). zz Press <0> again. zz Press the keys to select the time zone, then press <0>. zz If your desired time zone is not listed, press the button, then proceed to the next step to set it (with the time difference from the Coordinated Universal Time, UTC).
5 Set the daylight saving time. zz Set it as necessary. zz Press the keys to select [Y]. zz Press <0> so is displayed. zz Press the keys to select [Z], then press <0>. zz When the daylight saving time is set to [Z], the time set in step 4 will advance by 1 hour. If [Y] is set, the daylight saving time will be canceled and the time will go back by 1 hour. 6 Exit the setting. zz Press the keys to select [OK], then press <0>.
Selecting the Interface Language 1 Display the main tabs. zz Press the button to display the main tabs. 2 Under the [5] tab, select [LanguageK]. zz Press the keys to select the [5] main tab, then press <0>. zz Press the keys to select a secondary tab. zz Press the keys to select [LanguageK], then press <0>. 3 Set the desired language. zz Press the cross keys to select the language, then press <0>. BBThe interface language will change.
Attaching and Detaching a Lens The camera is compatible with all Canon EF and EF-S lenses. Note that you cannot use RF or EF-M lenses. Attaching a Lens 1 Remove the caps. zz Remove the rear lens cap and the body cap by turning them as shown by the arrows. (1) (2) 2 Attach the lens. zz Align the lens’s red or white index with the camera’s index matching the same color. Turn the lens as shown by the arrow until it clicks in place. (1) White index (2) Red index 3 Set the lens focus mode switch to .
Zooming Turn the zoom ring on the lens with your fingers. zz Perform the zoom operation before focusing. Turning the zoom ring after achieving focus may throw off the focus. Detaching the Lens (3) While pressing the lens release button, turn the lens as shown by the arrow. (2) (1) zz Turn the lens until it stops, then detach it. zz Attach the rear lens cap to the detached lens. zz Do not look at the sun directly through any lens. Doing so may cause loss of vision.
Basic Shooting Operations Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. zz Turn the knob left or right so that the AF points in the viewfinder look sharp. zz If the knob is difficult to turn, remove the eyecup (= 464). zz If the camera’s dioptric adjustment still cannot provide a sharp viewfinder image, using E-series Dioptric Adjustment Lenses (sold separately) is recommended. Holding the Camera To obtain sharp images, hold the camera still to minimize camera shake.
Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing Halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed in the viewfinder. While you press the shutter button halfway, the LCD monitor will turn off (= 272). Pressing Completely This releases the shutter and takes the picture.
Setting the Screen Display Level You can set how information is displayed on the screen according to your preference. Change the settings as necessary. 1 Display the main tabs. zz Press the button to display the main tabs. 2 Select the [s] tab. zz Press the keys of the cross keys to select the [s] tab, then press <0>. Shooting Screen You can select [Standard] or [Guided] (friendly display) for the Quick Control screen in viewfinder shooting. By default, it is set to [Guided].
zz Sample Screens : Guided : Standard : Guided : Standard zz In Creative Zone modes, when [Guided] is set, only the functions particular to the set shooting mode are displayed on the Quick Control screen. Note that items that cannot be set from the Quick Control screen when [Guided] is selected can be set via the menu screen (= 60).
Menu Display You can select the display type from [Standard] or [Guided]. If you set [Guided], main tab descriptions are provided when you press the button. If you set [Standard], you proceed directly to the menu screen when you press the button. By default, it is set to [Guided]. 1 Select [Menu display]. 2 Select the display type. (1) (1) Main tabs zz When [Guided] is set, the [9 (My Menu)] tab does not appear. To set My Menu (= 455), change the menu display level to [Standard].
Shooting Mode Guide A brief description of the shooting mode can be displayed when you switch shooting modes. By default, it is set to [Enable]. 1 Select [Mode guide]. 2 Select [Enable]. 3 Turn the Mode Dial. BBA description of the selected shooting mode will appear. 4 Press the key. BBThe rest of the description will appear. zz To clear the mode guide, press <0>. zz In the <8> and shooting modes, the shooting mode selection screen will appear.
Feature Guide When using Quick Control or setting menu items, you can display a brief description of functions and options (feature guide). By default, it is set to [Enable]. 1 Select [Feature guide]. 2 Select [Enable]. zz Sample Screens Quick Control screen Menu screen (1) (1) (1) Feature guide zz The description will disappear when you tap on it or proceed with the operation.
Shooting Tips Shooting tips appear when [Shooting screen] is set to [Guided] (= 51) and the camera settings result in any of the following conditions. In Basic Zone modes, shooting tips appear regardless of the [Shooting screen] setting. zz You want to blur the background further (by setting the lowest aperture value in the mode). zz The image is likely to be overexposed. zz The image is likely to be underexposed. zz Camera shake is likely to occur (only in Basic Zone modes).
Quick Control for Shooting Functions You can directly select and set the shooting functions displayed on the LCD monitor with intuitive operations. This is called Quick Control. 1 Press the button. BBThe Quick Control screen will appear. 2 Set the desired functions. zz Press the cross keys to select a function. BBThe settings of the selected function and Feature guide (= 55) will appear. zz Turn the <6> dial to change the setting. Basic Zone modes Creative Zone modes 3 Take the picture.
Sample Quick Control Screen zz When [s: Shooting screen: Guided] is Set (4) (1) (5) (2) (3) (6) (1) Exposure compensation (4) Aperture (2) Return (5) AF operation (3) Drive mode (6) AF point selection zz When [s: Shooting screen: Standard] is Set ( 7) (4) (8) (9) (1) (2) (3) (5) (6) (10) (11) (12) (13) (14) (15) (16) (17) (18) (1) Shooting mode* (10) ISO speed (2) Exposure compensation/AEB setting (11) Flash exposure compensation (3) Picture Style (4) White balance (13) Imag
Menu Operations and Configurations You can configure various settings with the menus such as the imagerecording quality, date/time, etc. (1) (3) (4) (2) (1) button (3) <0> button (2) LCD monitor (4) cross keys Menu Screen The menu tabs and items displayed vary depending on the shooting mode.
Menu Setting Procedure zz When [s: Menu display: Guided] is Set (1) 1 Display the main tabs. zz When you press the button, the main tabs (1) and a description of the selected tab will appear. 2 Select a main tab. zz Each time you press the keys of the cross keys, the main tab (group of functions) will switch. 3 Display the menu screen. zz Press <0> to display the menu screen. zz To return to the main tab screen, press the button. 4 Select a secondary tab.
7 Set the setting. zz Press <0> to set it. BBIf you change the setting from the default, it will be indicated in blue (available only for the menu items under the [z] tab). 8 Exit the setting. zz Press the button twice to exit the menu and return to shooting-ready state. zz In step 2, you can also use the <6> dial and button, instead of the cross keys. zz You can also go to the menu screen by tapping on [OK] in step 3.
Dimmed Menu Items Example: When [Multi Shot Noise Reduction] is set Dimmed menu items cannot be set. The menu item is dimmed if another function setting is overriding it. You can see the overriding function by selecting the dimmed menu item and pressing <0>. If you cancel the overriding function’s setting, the dimmed menu item will become settable. zz You may not be able to see the overriding function for certain dimmed menu items.
Operating the Camera with Touch Screen You can operate the camera by tapping on the LCD monitor (touch-sensitive panel) with your fingers. Tap Sample Screen (Quick Control) zz Use your finger to tap on (touch briefly and then remove your finger from) the LCD monitor. zz By tapping, you can select menus, icons, etc. displayed on the LCD monitor. zz For example, when you tap on [A], the Quick Control screen appears. By tapping on [2], you can return to the preceding screen.
Drag Sample Screen (Menu screen) zz Slide your finger while touching the LCD monitor.
Setting the Touch Control Response 1 Select [Touch control]. zz Under the [5] tab, select [Touch control], then press <0>. 2 Set the touch control response setting. zz Select the desired setting, then press <0>. zz [Standard] is the normal setting. zz [Sensitive] provides a more reactive touch screen response than [Standard]. Try using both settings and select the one you prefer. zz To disable touch operations, select [Disable].
Formatting Memory Cards If the card is new or was previously formatted by another camera or computer, format the card with this camera. zz When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images and data to a computer, etc. before formatting the card. 1 Select [Format card]. zz Under the [5] tab, select [Format card], then press <0>. 2 Format the card.
Perform [Format card] in the following cases: zz The card is new. zz The card was formatted by a different camera or a computer. zz The card is full of images or data. zz A card-related error is displayed (= 477). Low-level Formatting zz Perform low-level formatting if the card’s writing or reading speed seems slow or if you want to totally erase the data on the card.
Switching the LCD Monitor Display The LCD monitor can display the Quick Control screen, menu screen, captured images, etc. zz When you turn on the power, the Quick Control screen will appear. You can then check the current shooting function settings. zz When you press the shutter button halfway, the display will turn off. And when you let go of the shutter button, the display will turn on. zz You can also turn off the display by pressing the button. Press the button again to turn on the display.
Basic Shooting and Image Playback This chapter describes how to use the Basic Zone modes on the Mode Dial for best results and how to play back images. With Basic Zone modes, all you do is point and shoot, and the camera sets everything automatically. Also, because advanced shooting function settings cannot be changed, you can enjoy shooting photographs without worrying about botched pictures due to misoperation.
Fully Automatic Shooting (Scene Intelligent Auto) is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. It can also adjust focus automatically on either the still or moving subject by detecting the motion of the subject (= 74). 1 Set the Mode Dial to . 2 Aim the AF point over the subject. zz All the AF points (1) will be used to focus, and the camera will normally focus on the closest object.
3 Focus on the subject. zz Press the shutter button halfway. The lens elements will shift to focus. BBWhen achieving focus, the dot inside the AF point achieving focus flashes briefly in red. At the same time, the beeper will sound and the focus indicator (1) in the viewfinder will light up. zz If necessary, lift the flash with your fingers. (1) 4 Take the picture. zz Press the shutter button completely to take the picture. BBThe captured image will be displayed for approx. 2 sec.
FAQ zz The focus indicator blinks and focus is not achieved. -- Aim the AF point over an area with good contrast, then press the shutter button halfway (= 50). -- If you are too close to the subject, move away and shoot again. -- Select the AF point nearest to where you want to focus (= 108). The default setting is Automatic selection AF. zz Multiple AF points light up simultaneously. Focus has been achieved at all those points that flash in red.
zz When flash was used, the bottom part of the picture came out unnaturally dark. The shadow of the lens barrel was captured in the picture because the subject was too close to the camera. Move further away from the subject and shoot. If a hood is attached to the lens, remove it before taking the flash picture.
Full Auto Techniques (Scene Intelligent Auto) Recomposing the Shot Depending on the scene, positioning the subject toward the left or right to include a balanced background will result in a picture with better perspective. In the mode, pressing the shutter button halfway to focus on a still subject will lock the focus on that subject. Recompose the shot while keeping the shutter button pressed halfway, and then press the shutter button completely to take the picture. This is called “focus lock”.
Live View Shooting You can shoot while viewing the image on the LCD monitor. This is called “Live View shooting”. For details, see page 180. 1 Display the Live View image on the LCD monitor. zz Press the button. BBThe Live View image will appear on the LCD monitor. 2 Focus on the subject. zz Press the shutter button halfway to focus. BBWhen focus is achieved, the AF point will turn green and the beeper will sound. 3 Take the picture. zz Press the shutter button completely.
Shooting with Effects Applied (Creative Assist) 1 Press the button. zz In viewfinder shooting, use the keys to select [Creative Assist], then press <0>. zz In Live View shooting, read the message and select [OK]. 2 Select an effect. zz Use the keys to select an effect, then press <0>. 3 Select the effect level and other details. zz Use the keys to set it, then press <0>. zz To reset the setting, press the button, then select [OK].
zz [ ] Brightness Adjust image brightness. zz [ ] Contrast Adjust contrast. zz [ ] Saturation Adjust the vividness of colors. ] Color tone 1 zz [ Adjust amber/blue color tone. ] Color tone 2 zz [ Adjust green/magenta color tone. zz [ ] Monochrome Set the toning effect for monochrome shooting. Set to [Off] to shoot in color. [Saturation], [Color tone 1], and [Color tone 2] are not available with options other than [Off]. zz [Background blur] is not available when the flash is used.
Special Scene Mode The camera will automatically choose the appropriate settings when you select a shooting mode for your subject or scene. * <8> stands for Special Scene. 1 Set the Mode Dial to <8>. 2 Press the button. 3 Select a shooting mode. zz Press the keys to select the desired shooting mode, then press <0>. zz You can also select by turning the <6> dial.
Shooting Portraits The <2> (Portrait) mode blurs the background to make the human subject stand out. It also makes skin tones and hair look softer. Shooting Tips zz Select the location where the distance between the subject and the background is the farthest. The further the distance between the subject and background, the more blurred the background will look. The subject will also stand out better against an uncluttered dark background. zz Use a telephoto lens.
Shooting Portraits with Smooth Skin Tone Use the (Smooth skin) mode to make skin look more attractive in portraits. Images are processed to make skin look smoother. Shooting Tips zz Adjust the face size. Frames are displayed around any main subjects detected for skin smoothing. For more effective skin smoothing, you can adjust the size so that the frame is displayed on the subject’s face. zz Focus on the face. Check that the AF point covering the face lights up.
Shooting Group Photos Use the (Group Photo) mode to shoot group photos. You can take a picture in which both the people in the front and people in the back are all in focus. Shooting Tips zz Use a wide-angle lens. When using a zoom lens, use the wide-angle end to make it easy to get all the people in the group in focus at once, from the front row to the back.
Shooting Landscapes Use the <3> (Landscape) mode for wide scenery or to have everything in focus from near to far. For vivid blues and greens, and very sharp and crisp images. Shooting Tips zz With a zoom lens, use the wide-angle end. When using a zoom lens, set the lens to the wide-angle end to make the objects near and far in focus. It also adds breadth to landscapes. zz Shooting night scenes. The <3> mode is also good for night scenes because it disables the built-in flash.
Shooting Moving Subjects Use the <5> (Sports) mode to shoot a moving subject, such as a running person or a moving vehicle. Shooting Tips zz Use a telephoto lens. Use of a telephoto lens is recommended for shooting from a distance. zz Use the center AF point to focus. Aim the center AF point over the subject, then press the shutter button halfway to autofocus. During autofocusing, the beeper will continue beeping softly. If focus cannot be achieved, the focus indicator will blink.
Photographing Children When you want to continuously focus on and photograph children running around, use (Kids). Skin tones will look healthy. Shooting Tips zz Use the center AF point to focus. Aim the center AF point over the subject, then press the shutter button halfway to autofocus. During autofocusing, the beeper will continue beeping softly. If focus cannot be achieved, the focus indicator will blink. zz Shoot continuously. The default setting is (Continuous shooting).
Shooting Close-ups When you want to shoot flowers or small things up close, use the <4> (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips zz Use a simple background. A simple background makes small objects such as flowers stand out better. zz Move in as close as possible to the subject. Check the lens for its minimum focusing distance. Some lenses have indications such as <0.25m/0.8ft> on them.
Shooting Food When shooting food, use
(Food). The photo will look bright and appetizing. Also, depending on the light source, the reddish tinge will be suppressed in the pictures taken under tungsten lights, etc. Shooting Tips zz Change the color tone. You can change [Color tone]. To increase the food’s reddish tinge, set it toward [Warm]. Set it toward [Cool] if it looks too red. zz Avoid using flash. If you use flash, the light may reflect off the dish or food and results in unnatural shadows.
Shooting Candlelight Portraits When you want to photograph a human subject lit in candlelight, use (Candlelight). The atmosphere of candlelight is reflected in the color tones of the picture. Shooting Tips zz Use the center AF point to focus. Aim the center AF point in the viewfinder over the subject, then shoot. zz Prevent camera shake if the numeric display (shutter speed) in the viewfinder blinks. Under low light, the viewfinder’s shutter speed display will blink.
Shooting Night Portraits (With a Tripod) When you want to photograph people at night and obtain a natural-looking night scene in the background, use the <6> (Night Portrait) mode. Using a tripod is recommended. Shooting Tips zz Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Also, since camera shake is prone to occur with handheld shooting, use a tripod. zz Check the subject’s brightness.
Shooting Night Scenes (Handheld) Using a tripod when shooting a night scene gives the best results. However, the (Handheld Night Scene) mode enables you to shoot night scenes even while handholding the camera. In this shooting mode, four shots are taken consecutively for each picture, and the resulting one image with reduced camera shake is recorded. Shooting Tips zz Hold the camera firmly. During shooting, hold the camera firmly and steadily.
Shooting Backlit Scenes When shooting a scene having both the bright and dark areas, use the (HDR Backlight Control) mode. When you take one picture in this mode, three consecutive shots are taken at different exposures. This results in one image, with a wide tonal range, that has minimized the clipped shadows caused by backlighting. Shooting Tips zz Hold the camera firmly. During shooting, hold the camera firmly and steadily. In this mode, three shots are aligned and merged into a single image.
Cautions for Group Photo zz Since distortion correction is applied, the camera records an image area narrower than the one seen through the viewfinder. (The image periphery is slightly trimmed and the resolution looks slightly lowered.) Also, during Live View shooting, the angle of view changes slightly. Cautions for Kids zz During Live View shooting, if flash is fired in continuous shooting, the continuous shooting speed will decrease.
Cautions for Handheld Night Scene zz In flash photography, if the subject is too close to the camera, the picture may come out extremely bright (overexposure). zz In flash photography, if you shoot a night scene with limited lights, the shots may not align correctly. This may result in a blurry picture. zz In flash photography, if the human subject is close to the background that is also illuminated by the flash, the shots may not align correctly. This may result in a blurry picture.
Shooting with Creative Filter Effects In the (Creative filters) mode, you can apply one of ten filter effects (Grainy B/W*, Soft focus*, Fish-eye effect*, Water painting effect*, Toy camera effect*, Miniature effect*, HDR art standard, HDR art vivid, HDR art bold, and HDR art embossed) for shooting. When the camera is set for Live View shooting, you can see the effect on the screen before you start shooting. The camera saves only the image with the Creative filter effects applied.
4 Select a shooting mode. zz Press the keys to select a shooting mode, then press <0>. BBThe image will be displayed with the effects of the filter applied. Available Shooting Modes in the v Mode G W X Z H Shooting Mode Grainy B/W Soft focus Fish-eye effect Water painting effect Toy camera effect Page = 95 = 95 = 95 = 95 = 95 c A B C D Shooting Mode Miniature effect HDR art standard HDR art vivid HDR art bold HDR art embossed Page = 96 = 96 = 96 = 96 = 96 5 Adjust the effect.
During Live View Shooting zz With Grainy B/W, the grainy effect displayed on the LCD monitor will look different from the grainy effect recorded in the picture. zz With the Soft focus and Miniature effects, the blurred effect displayed on the LCD monitor may look different from the blurred effect recorded in the picture. zz The histogram is not displayed. zz Magnified view is not possible. zz In Creative Zone modes, you can set some Creative filters with Quick Control (= 93).
zz c Miniature effect Creates a diorama effect. If you want the image center to look sharp, take the picture without changing any setting. To move the area that looks sharp (miniature effect frame) in Live View shooting, see “Adjusting Miniature Effect” (= 98). 1-point AF is used as the AF method. Positioning the miniature effect frame over the AF point before shooting is recommended. During viewfinder shooting, aim the center AF point over the subject and shoot.
Cautions for HDR Art Standard, HDR Art Vivid, HDR Art Bold, and HDR Art Embossed zz Compared to other shooting modes, the image area will be smaller. zz The Live View image displayed with the filter applied will not look exactly the same as the actual captured image. zz If you shoot a moving subject, the subject’s movement may leave afterimages, or the surrounding area of the subject may become dark.
Adjusting Miniature Effect 1 Move the AF point. zz Move the AF point to where you want to focus on. 2 Move the miniature effect frame. zz Move the miniature effect frame if the AF point is outside of it, so that the AF point is aligned with it. zz Press the button (or tap on the [r] icon at the bottom right of the screen). The miniature effect frame will turn orange and can be moved.
Quick Control You can directly select and set settings accessed by pressing the button in Basic Zone modes. 1 Set the Mode Dial to a Basic Zone mode. Example: 2 Press the button. BBThe Quick Control screen will appear. 3 Set the desired functions. zz Press the cross keys to select a function. BBThe settings of the selected function and Feature guide (= 55) will appear. zz Turn the <6> dial to change the setting.
Adjusting the Brightness This section describes how to adjust brightness for shooting in <8> modes other than <8:G>. You can adjust both the brightness and darkness across 3-step ranges with 0 being the standard. 1 Set the Mode Dial to <8: 2Eq35C4Px6F>. zz Set to any mode other than . 2 Display the Live View image. zz Press the button to display the Live View image (except ). 3 With Quick Control, select the desired brightness. zz Press the button.
Image Playback The easiest way to play back images is described below. For more details on the playback procedure, see page 280. 1 Play back the image. zz Press the button. BBThe last image captured or played back will appear. 2 Select an image. zz To play back images starting with the last image captured, press the key. To play back images starting with the first captured image, press the key. zz Each time you press the button, the display will change.
3 Exit the image playback. zz Press the button to exit the image playback and return to shooting-ready state. Shooting Information Display With the shooting information screen displayed (= 101), you can press the keys to change the shooting information displayed at the screen bottom as follows. For details, see = 324 - = 325.
Setting the AF and Drive Modes The AF points in the viewfinder are arranged to make AF shooting suitable for a wide variety of subjects and scenes. You can also select the AF operation and drive mode that best match the shooting conditions and subject. zz The N icon at the upper right of the page title indicates that the function is available only in Creative Zone modes (= 31). zz In Basic Zone modes, the AF operation is set automatically. zz stands for autofocus. stands for manual focus.
Changing the Autofocus Operation N You can select the AF (autofocus) operation characteristics to suit the shooting conditions or subject. In Basic Zone modes, the optimum AF operation is set automatically for the respective shooting mode. 1 Set the lens focus mode switch to . 2 Turn the Mode Dial to a Creative Zone mode. 3 Select [AF operation]. zz Under the [z] tab, select [AF operation], then press <0>. BB[AF operation] will appear. 4 Select the AF operation.
One-Shot AF for Still Subjects Suited for still subjects. When you press the shutter button halfway, the camera will focus only once. (1) (2) zz The dot inside the AF point (1) achieving focus lights up briefly in red, and the focus indicator (2) in the viewfinder will also light up. zz With evaluative metering, the exposure setting will be set at the same time focus is achieved. zz While you keep holding down the shutter button halfway, the focus will be locked.
AI Servo AF for Moving Subjects This AF operation is suited for moving subjects when the focusing distance keeps changing. While you hold down the shutter button halfway, the camera will keep focusing on the subject continuously. zz The exposure is set at the moment the picture is taken. zz When the AF point selection (= 108) is automatic, the camera first uses the center AF point to focus.
zz The effective range of the AF-assist beam emitted by the built-in flash is approx. 4 meters/13.1 feet. zz The AF-assist beam is fired as needed when the built-in flash has been raised. To prevent it from firing, set [z: AF-assist beam firing] to [Disable] (= 167). Setting Lens Electronic MF With USM and STM lenses equipped with electronic manual focusing function, you can set whether to use electronic manual focusing in One-Shot AF mode. The default setting is [Disable after One-Shot AF].
Selecting the AF Point 1 Press the button. BBThe selected AF point will be displayed on the LCD monitor and in the viewfinder. 2 Select the AF point. zz Use the cross keys to select the AF point. zz To select the AF point while looking in the viewfinder, turn the <6> dial to switch the point lit in red. zz When all the AF points light up, automatic AF point selection will be set. The AF point will be selected automatically to focus on the subject.
Shooting Tips zz When shooting a portrait up close, use [One-Shot AF] and focus on the eyes. Focus on the subject’s eyes before composing your shot. zz If it is difficult to focus, select the center AF point. The center AF point has the highest focusing performance among the nine AF points. zz For easier tracking of moving subjects, use [Automatic selection] in conjunction with [AI Servo AF] of AF operation (= 106). The center AF point will first be used to focus on the subject.
Subjects Difficult to Focus on Autofocus may fail to achieve focus (focus indicator in the viewfinder blinks) with special subjects such as the following: zz Subjects with very low contrast (Example: Blue skies, solid-color flat surfaces, etc.) zz Subjects in very low light zz Strongly backlit or reflective subjects (Example: Car with a highly reflective body, etc.) zz Near and distant subjects positioned close to an AF point (Example: Animals in cages, etc.
MF: Manual Focus 1 Set the lens’s focus mode switch to . 2 Focus on the subject. zz Focus by turning the lens focusing ring until the subject looks sharp in the viewfinder. zz If you press the shutter button halfway and focus manually, the AF point achieving focus will light up briefly in red, and the focus indicator will light up in the viewfinder.
Selecting the Drive Mode Single and continuous drive modes are provided. 1 Press the button. BBThe Quick Control screen will appear. 2 Select [ ]. zz Press the cross keys to select ], then press <0>. [ 3 Select the drive mode. zz Press the keys to select the desired drive mode, then press <0>. : Single shooting u When you press the shutter button completely, only one shot will be taken.
l : Self-timer: 2 sec q : Self-timer: Continuous For self-timer shooting, see page 206. For remote control shooting with the BR-E1, see page 463. zz The continuous shooting speed may become slower depending on the shutter speed, aperture, subject conditions, brightness, lens, flash use, temperature, power source, remaining battery level, etc. zz With Live View shooting, the and cannot be set.
Image Settings This chapter describes image-related function settings: Image-recording quality, ISO speed, Picture Style, white balance, Auto Lighting Optimizer, noise reduction, lens aberration correction, and other functions. zz The N icon at the upper right of the page title indicates that the function is available only in Creative Zone modes (= 31).
Setting Image Quality You can select the pixel count and the image quality. JPEG image quality options include 73, 83, 74, 84, 7a, 8a, and b. RAW image quality options include 1 and D. 1 Select the image-recording quality. zz Under the [z] tab, select [Image quality], then press <0>. BB[Image quality] will appear. (1) (2) 2 Set the image-recording quality. zz To select the RAW quality, turn the <6> dial, and to select the JPEG quality, press the keys.
FAQ zz I want to select the image-recording quality matching the paper size for printing. Paper size Refer to the diagram on the left when choosing the image-recording quality. If you want to crop the image, selecting a higher quality (more pixels) such as 73, 83, 1, or D is recommended. b is suitable for playing back the A3 (42x29.7 cm/16.5x11.7 in.) image with a digital photo frame. A2 (59.4x42 cm/23.4x16.5 in.) A4 (29.7x21 cm/11.7x8.3 in.) 12.7x8.9 cm/5.0x3.5 in.
RAW Images and JPEG Images zz RAW images are raw data from the image sensor that are recorded to the card digitally as 1 or D (smaller than 1) files, depending on your selection. You can use Digital Photo Professional (EOS software) to process RAW images. You can make various adjustments to images depending upon how they will be used and can generate JPEG or other types of images reflecting the effects of those adjustments. zz If [–] is set for both the RAW image and JPEG image, 73 will be set.
Setting the ISO Speed for Still PhotosN Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In Basic Zone modes, the ISO speed is set automatically. Regarding the ISO speed during movie shooting, see = 219, = 219, and = 222. 1 Press the button. 2 Set the ISO speed. zz While looking in the viewfinder or at the LCD monitor, press the keys or turn the <6> dial to select the desired ISO speed, then press <0>. zz ISO speed can be set within ISO 100 ISO 25600.
zz If [z: Highlight tone priority] is set to [Enable] or [Enhanced], ISO 100 and “H” (equivalent to ISO 51200) cannot be selected (= 137). zz Shooting in high temperatures may result in images that look grainier. Long exposures can also cause irregular colors in the image. zz When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable. zz If you use a high ISO speed and flash to shoot a close subject, overexposure may result.
Setting the Maximum ISO Speed for [AUTO] For ISO Auto, you can set the maximum ISO speed limit within ISO 400 ISO 25600. 1 Select [zISO speed settings]. zz Under the [z] tab, select [zISO speed settings], then press <0>. 2 Select [Max for Auto]. zz Select [Max for Auto], then press <0>. 3 Select the ISO speed. zz Select the ISO speed, then press <0>.
\ Selecting a Picture Style N Just by selecting a preset Picture Style, you can obtain image characteristics effectively matching your photographic expression or the subject. 1 Select [Picture Style]. zz Under the [z] tab, select [Picture Style], then press <0>. BBThe Picture Style selection screen will appear. 2 Select a Picture Style. zz Select a Picture Style, then press <0>. BBThe Picture Style will be set.
R Landscape For vivid blues and greens, and very sharp and crisp images. Effective for impressive landscapes. u Fine Detail Suited for detailed outline and fine texture description of the subject. The colors will be slightly vivid. S Neutral Geared for users who prefer to process images with their computer. For natural colors and subdued images with modest brightness and color saturation. U Faithful Geared for users who prefer to process images with their computer.
Symbols The Picture Style selection screen has icons for [Strength], [Fineness], or [Threshold] for [Sharpness] as well as [Contrast] and other parameters. The numerals indicate the values for these parameters set for the respective Picture Style. Symbols Sharpness Strength J Fineness K Threshold L Contrast Saturation Color tone Filter effect (Monochrome) Toning effect (Monochrome) g h i j k l zz During movie shooting, “ * ” will be displayed for both [Fineness] and [Threshold] for [Sharpness].
Customizing a Picture Style N You can customize the Picture Styles. You can change or adjust the parameter settings of Picture Styles such as [Strength], [Fineness], or [Threshold] for [Sharpness] as well as [Contrast] and other parameters from the default settings. To see the resulting effects, take test shots. To customize [Monochrome], see page 126. 1 Select [Picture Style]. zz Under the [z] tab, select [Picture Style], then press <0>. BBThe Picture Style selection screen will appear.
Settings and Effects g h i j Sharpness J Strength K Fineness*1 L Threshold*2 Contrast Saturation Color tone 0: Weak outline emphasis 1: Fine 1: Low -4: Low contrast -4: Low saturation -4: Reddish skin tone 7: Strong outline emphasis 5: Grainy 5: High +4: High contrast +4: High saturation +4: Yellowish skin tone *1: Indicates the fineness of the outlines to be emphasized. The smaller the number, the finer the outlines that can be emphasized.
Monochrome Adjustment Besides the effects described on “Settings and Effects” (= 125) such as [Contrast], or [Strength], [Fineness] and [Threshold] for [Sharpness], you can also set [Filter effect] and [Toning effect]. kFilter effect N Filter : None Ye : Yellow Or : Orange R : Red G : Green With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more than the original. Sample Effects Normal black-and-white image with no filter effects.
Registering a Picture Style N You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. Useful when you want to preset multiple Picture Styles with different settings. Picture Styles that you have registered on the camera using EOS Utility (EOS software) can also be modified here. 1 Select [Picture Style]. zz Under the [z] tab, select [Picture Style], then press <0>.
5 Select a parameter. zz Select the parameter (such as [Strength] of [Sharpness]) to be set, then press <0>. 6 Set the parameter. zz Press the keys to adjust the effect of the parameter, then press <0>. For details, see “Customizing a Picture Style” (= 124). zz Press the button to register the adjusted parameter settings. The Picture Style selection screen will then reappear. BBThe base Picture Style will be indicated on the right of [User Def. *].
Matching the Light Source N White balance (WB) is for making the white areas look white. Normally, the Auto [Q] (Ambience priority) or [Qw] (White priority) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with Auto, you can select the white balance to match the light source or set it manually by shooting a white object. In Basic Zone modes, [Q] (Ambience priority) is set automatically. (In the
mode, [Qw] (White priority) is set.) 1 Select [White balance].
Auto White Balance With [Q] (Ambience priority), you can increase the intensity of the image’s warm color cast when shooting a tungsten-light scene. If you select [Qw] (White priority), you can reduce the intensity of the image’s warm color cast. If you want to match the Auto white balance of previous EOS DIGITAL camera models, select [Q] (Ambience priority). 1 Select [White balance]. zz Under the [z] tab, select [White balance], then press <0>. BB[White balance] will appear. 2 Select [Q].
Custom White Balance With custom white balance, you can set the white balance for the specific light source of the shooting location. Make sure to perform this procedure under the light source at the actual location of the shoot. 1 Shoot a white object. zz Look through the viewfinder and aim the entire dotted line box (shown in the illustration) over a plain, white object. zz Focus manually and shoot with the standard exposure set for the white object. zz You can use any of the white balance settings.
4 Select [O (Custom)]. zz Under the [z] tab, select [White balance], then press <0>. zz Select [O (Custom)], then press <0>. zz If the exposure obtained in step 1 differs greatly from the standard exposure, a correct white balance may not be obtained.
Adjusting the Color Tone for the Light Source N You can correct the white balance that is set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. This function is for advanced users, particularly for those users who understand the use of color temperature conversion and color compensating filters and their effects. White Balance Correction 1 Select [WB Shift/Bkt.
zz You can set the camera to display in the viewfinder and on the LCD monitor for when white balance correction is set (= 450). zz One level of the blue/amber correction is equivalent to approx. 5 mireds of a color temperature conversion filter. (Mired: Unit of measure for color temperature used to indicate values such as the density of a color temperature conversion filter.) White Balance Auto Bracketing With just one shot, three images with different color tones can be recorded simultaneously.
zz During white balance bracketing, the maximum burst will be lower and the number of possible shots will also decrease to approx. one-third the normal number. zz Since three images are recorded for one shot, it takes longer to record the image to the card. zz You can also set white balance correction and AEB together with white balance bracketing. If you set AEB in combination with white balance bracketing, a total of nine images will be recorded for a single shot.
Auto Correction of Brightness and N Contrast If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. This function is called Auto Lighting Optimizer. The default setting is [Standard]. With JPEG images, the correction is applied when the image is captured. In Basic Zone modes, [Standard] is set automatically. 1 Select [Auto Lighting Optimizer]. zz Under the [z] tab, select [Auto Lighting Optimizer], then press <0>. 2 Select the setting.
Highlight Tone Priority N You can reduce overexposed, clipped highlights. 1 Select [Highlight tone priority]. zz Under the [z] tab, select [Highlight tone priority], then press <0>. 2 Set an option. zz [Enable]: Improves gradation in highlights. The gradation between the grays and highlights becomes smoother. zz [Enhanced]: Reduces overexposed highlights even more than [Enable], under some shooting conditions. 3 Take the picture. BBThe image will be recorded with highlight tone priority applied.
Setting Noise Reduction N High ISO Speed Noise Reduction This function reduces the noise generated in the image. Although noise reduction is applied at all ISO speeds, it is particularly effective at high ISO speeds. When shooting at low ISO speeds, the noise in the darker parts of the image (shadow areas) can further be reduced. Change the setting to match the noise level. 1 Select [High ISO speed NR]. zz Under the [z] tab, select [High ISO speed NR], then press <0>. 2 Set the level.
When [Multi Shot Noise Reduction] is Set zz If there is significant misalignment in the image due to camera shake, the noise reduction effect may become smaller. zz If you are handholding the camera, keep it steady to prevent camera shake. Using a tripod is recommended. zz If you shoot a moving subject, the moving subject may leave afterimages. zz The image alignment may not function properly with repetitive patterns (lattice, stripes, etc.) or flat, single-tone images.
2 Set the desired setting. zz Select the desired setting, then press <0>. zz [Auto] For exposures of 1 sec. or longer, noise reduction is performed automatically if noise typical of long exposures is detected. This [Auto] setting is effective enough in most cases. zz [Enable] Noise reduction is performed for all exposures of 1 sec. or longer. The [Enable] setting may reduce noise that cannot be detected with the [Auto] setting. 3 Take the picture.
Correction of Lens Aberrations due N to Optical Characteristics Vignetting, image distortion, and other issues may be caused by lens optical characteristics. The camera can compensate for these phenomena by using [Lens aberration correction]. 1 Select [Lens aberration correction]. zz Under the [z] tab, select [Lens aberration correction], then press <0>. 2 Select an item. zz Press the keys to select the item, then press <0>. 3 Select [Enable].
Peripheral Illumination Correction Vignetting (dark image corners) can be corrected. zz Depending on shooting conditions, noise may appear on the image periphery. zz The higher the ISO speed, the lower the correction amount will be. zz The correction amount applied will be lower than the maximum correction amount that applied with Digital Photo Professional (EOS software). zz Peripheral illumination is corrected automatically in Basic Zone modes when correction data is registered on the camera.
Digital Lens Optimizer Various aberrations from lens optical characteristics can be corrected, along with diffraction and low-pass filter-induced loss of clarity. If [Correction data not available] or [ ] is displayed by [Digital Lens Optimizer], you can use EOS Utility to add the lens correction data to the camera. For details, refer to the EOS Utility Instruction Manual. zz Depending on shooting conditions, noise may be intensified together with the effects of correction.
Diffraction Correction Diffraction (loss of sharpness caused by the aperture) can be corrected. zz Depending on shooting conditions, noise may be intensified together with the effects of correction. zz The higher the ISO speed, the lower the correction amount will be. zz For movie shooting, [Diffraction correction] will not appear. (Correction is not possible.) zz With “Diffraction correction”, degraded resolution due to the low-pass filter, etc. is corrected in addition to diffraction.
Setting the Color Reproduction Range N The range of reproducible colors is called “color space”. With this camera, you can set the color space for captured images to sRGB or Adobe RGB. For normal shooting, sRGB is recommended. In Basic Zone modes, [sRGB] is set automatically. 1 Select [Color space]. zz Under the [z] tab, select [Color space], then press <0>. 2 Set the desired color space. zz Select [sRGB] or [Adobe RGB], then press <0>.
Advanced Operations for Photographic Effects In Creative Zone modes, you can change various settings of the camera as you desire to obtain a wide variety of shooting results, by selecting the shutter speed and/or aperture, adjusting the exposure as you prefer, etc. zz After you press the shutter button halfway and let it go, the exposure settings will remain displayed in the viewfinder for approx. 4 sec. by the metering timer function.
Program AE (P Mode) The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. * stands for Program. * AE stands for Auto Exposure. 1 Set the Mode Dial to . 2 Focus on the subject. zz Look through the viewfinder and aim the AF point over the subject. Then press the shutter button halfway.
Shooting Tips zz Change the ISO speed. Use the built-in flash. To match the subject and ambient lighting level, you can change the ISO speed (= 118) or use the built-in flash (= 169). zz Change the program using Program shift. After pressing the shutter button halfway, turn the <6> dial to change the shutter speed and aperture setting combination (program). Program shift is canceled automatically after the picture is taken. Program shift is not possible with flash.
Conveying the Subject’s Movement (Tv Mode) You can either freeze the action or create motion blur with the (Shutter-priority AE) mode on the Mode Dial. * stands for Time value. Blurred motion (Slow shutter speed: 1/30 sec.) Frozen motion (Fast shutter speed: 1/2000 sec.) 1 Set the Mode Dial to . 2 Set the desired shutter speed. zz See “Shooting Tips” (= 150) for advice on setting the shutter speed.
Shutter Speed Display zz The LCD monitor displays the shutter speed as a fraction. However, the viewfinder displays only the denominator. “0"5” indicates 0.5 sec. and “15"” is 15 sec. Shooting Tips zz To freeze the motion of a fast-moving subject Use a fast shutter speed such as 1/4000 sec. to 1/500 sec. according to the speed of the moving subject. zz To blur a running child or animal and convey an impression of motion Use a medium shutter speed such as 1/250 sec. to 1/30 sec.
Using the Built-in Flash To obtain a correct flash exposure on the main subject, the flash output will be set automatically (autoflash) to match the automatically-set aperture.
Changing the Depth of Field (Av Mode) To blur the background or to make everything near and far look sharp, set the Mode Dial to (Aperture-priority AE) to adjust the depth of field (range of acceptable focus). * stands for Aperture value (the size of the lens diaphragm opening). Blurred background (With a low aperture f/number: f/5.6) Sharp foreground and background (With a high aperture f/number: f/32) 1 Set the Mode Dial to . 2 Set the desired aperture.
Aperture Value Display zz The higher the f/number, the smaller the aperture opening will be. The f/ number displayed will differ depending on the lens. If no lens is attached to the camera, “00” will be displayed for the aperture. Shooting Tips zz When using an aperture with a high f/number or shooting in low light scenes, note that camera shake can occur. A higher aperture f/number will make the shutter speed slower. Under low light, the shutter speed can be as long as 30 sec.
Using the Built-in Flash To obtain a correct flash exposure, the flash output will be automatically controlled (autoflash) to match the set aperture. The shutter speed will be set automatically to match the brightness of the scene (= 176). In low light, the main subject is exposed with the autoflash, and the background is exposed with a slow shutter speed set automatically.
Manual Exposure (M Mode) You can set both the shutter speed and aperture manually as desired. While referring to the exposure level indicator in the viewfinder, you can set the exposure as desired. This method is called manual exposure. * stands for Manual. 1 Set the Mode Dial to . 2 Set the ISO speed (= 118). 3 Set the shutter speed and aperture. <6> + <6> (1) (2) zz To set the shutter speed, turn the <6> dial. zz To set the aperture, turn the <6> dial while holding down the button.
5 Set the exposure and take the picture. zz Check the exposure level indicator and set the desired shutter speed and aperture. zz If the exposure level exceeds ±2 stops from the standard exposure, the end of the exposure level indicator will display or in the viewfinder. (On the LCD monitor, if the exposure level exceeds ±3 stops, or will be displayed.) zz The set exposure setting will not be maintained for movie shooting.
Using the Built-in Flash To obtain a correct flash exposure on the main subject, the flash output will be set automatically (autoflash) to match the manually-set aperture. Note that the range of settable shutter speed will be limited within 1/200 sec. to 30 sec. or to bulb. BULB: Long (Bulb) Exposures (1) A bulb exposure keeps the shutter open for as long as you hold down the shutter button. It can be used to shoot fireworks and other subjects requiring long exposures.
Changing the Metering Mode N Four methods (metering modes) to measure the subject’s brightness are provided. Normally, evaluative metering is recommended. In Basic Zone modes, evaluative metering is set automatically. (In the <8: x> and modes, center-weighted average metering is set.) 1 Select [Metering mode]. zz Under the [z] tab, select [Metering mode], then press <0>. 2 Set the metering mode. zz Select the desired metering mode, then press <0>.
e Center-weighted average metering The metering is averaged for the entire scene with the screen center weighted more heavily. This metering mode is for advanced experts. zz With q (Evaluative metering), the exposure setting will be locked when you press the shutter button halfway and focus is achieved. In the w (Partial metering), r (Spot metering), and e (Center-weighted average metering) modes, the exposure is set at the moment the picture is taken.
Setting the Desired Exposure Compensation N Set exposure compensation if the results of shooting without using the flash are not as bright as expected. This feature can be used in Creative Zone modes (except ). You can set the exposure compensation up to ±5 stops* in 1/3-stop increments. If the mode and ISO Auto are both set, see page 156 to set the exposure compensation.
zz When you set the power switch to <2>, the exposure compensation setting will be canceled. zz The exposure compensation amount displayed in the viewfinder goes up to only ±2 stops. If the exposure compensation amount exceeds ±2 stops, the end of the exposure level indicator will display or . zz If you want to set exposure compensation exceeding ±2 stops, setting it with [z: Expo.comp./AEB] (= 162) is recommended.
Auto Exposure Bracketing N This feature takes exposure compensation a step further by varying the exposure automatically in the range of ±2 stops in 1/3-stop increments with three shots as shown below. You can then choose the best exposure. This is called AEB (Auto Exposure Bracketing). Standard exposure Darker exposure (Decreased exposure) Brighter exposure (Increased exposure) 1 Select [Expo.comp./AEB]. zz Under the [z] tab, select [Expo. comp./AEB], then press <0>. 2 Set the AEB range.
Canceling AEB zz Follow steps 1 and 2 to turn off the AEB range display (set to 0). zz The AEB setting will also be canceled automatically if the power switch is set to <2>, flash recharging is complete, etc.
Locking the Exposure N You can lock the exposure when you want to set the focus and exposure separately or when you are to take multiple shots at the same exposure setting. Press the button to lock the exposure, then recompose and take the picture. This is called AE lock. It is effective for shooting backlit subjects, etc. 1 Focus on the subject. zz Press the shutter button halfway. BBThe exposure setting will be displayed. 2 Pressing the button.
Mirror Lockup to Reduce Camera Vibration Blur N You can use the mirror lockup function to prevent the disturbing mechanical vibrations (mirror shock) when shooting with super telephoto lenses or shooting close-ups (macro photography). Mirror lockup is enabled by setting [Mirror lockup] to [1:Enable] in [5: Custom Functions(C.Fn)] (= 449). 1 Focus on the subject, then press the shutter button completely. BBThe mirror will swing up. 2 Press the shutter button completely again.
zz Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. zz In very bright light, such as at the beach or a ski slope on a sunny day, take the picture promptly after mirror lockup is stabilized. zz When shooting with mirror lockup, if you use both the self-timer and bulb exposures, keep pressing the shutter button completely (for self-timer delay time + bulb exposure time).
AF-Assist Beam Settings Specify firing of the AF-assist beam from the camera’s built-in flash or an EOS Speedlite. 1 Select [AF-assist beam firing]. zz Under the [z] tab, select [AF-assist beam firing], then press <0>. 2 Select an item. zz Press the keys to select the item, then press <0>. zz [ON] Enable The AF-assist beam will be emitted when necessary. Raise the flash to emit the AF-assist beam from the built-in flash. zz [OFF] Disable The AF-assist beam will not be emitted.
Flash Photography This chapter describes how to shoot with built-in flash and external Speedlites (EL/EX-series, sold separately), and how to set flash settings on the camera’s menu screen. zz AEB cannot be used in flash photography.
Using the Built-in Flash In indoor, low light, or backlit conditions in daylight, just raise the builtin flash and press the shutter button to easily take beautiful pictures. In the mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set automatically to prevent camera shake. 1 Raise the flash with your fingers. zz In Creative Zone modes, shooting with flash is possible whenever the flash is raised.
Shooting Tips zz In bright light, decrease the ISO speed. If the exposure setting in the viewfinder blinks, decrease the ISO speed. zz Detach the lens hood. Do not get too close to the subject. If the lens has a hood attached or you are too close to the subject, the bottom of the picture may look dark due to the obstructed flash light. For important shots, play back the image and check to make sure the picture does not look unnaturally dark at the bottom part.
Flash Exposure Compensation N Set the flash exposure compensation if the brightness of the subject does not come out as desired (so you want to adjust the flash output) in flash photography. You can set the flash exposure compensation up to ±2 stops in 1/3-stop increments. 1 Select [Flash control]. zz Under the [z] tab, select [Flash control], then press <0>. 2 Select [Built-in flash settings]. 3 Select [2exp. comp.]. 4 Set the compensation amount.
zz If [z: Auto Lighting Optimizer] (= 136) is set to any setting other than [Disable], the image may still look bright even if a decreased flash exposure compensation is set. zz If flash exposure compensation is set with an external Speedlite (sold separately, = 174), you cannot set the flash exposure compensation with the camera (Quick Control or External flash function settings). If it is set with both the camera and external Speedlite, the Speedlite’s setting overrides the camera’s.
Locking the Flash Exposure (FE lock) N If the subject is at the edge of the screen, and you use flash, the subject may turn out to be too bright or dark depending on the background, etc. Use FE lock in such a case. After setting the flash output for the appropriate subject brightness, you can recompose (put the subject toward the side) and shoot. This feature can also be used with a Canon EL/EX-series Speedlite. * FE stands for Flash Exposure. 1 Raise the flash with your fingers.
Using an External Speedlite EOS-dedicated, EL/EX-series Speedlites Using an EL/EX-series Speedlite (sold separately) makes flash photography easy. For operation procedures, refer to the EL/EX-series Speedlite’s Instruction Manual. zz Functions are limited when using EX series Speedlites that are not compatible with flash function settings. zz Non-EL/EX series Canon Speedlites will not fire.
Setting the Flash Function With the built-in flash or an EL/EX-series, external Speedlite compatible with the flash function settings, you can use the camera’s menu screen to set flash functions and the external Speedlite’s Custom Functions. If you use an external Speedlite, attach the Speedlite to the camera and turn on the Speedlite before setting the flash functions. For details on the external Speedlite’s flash functions, refer to the Speedlite’s instruction manual. 1 Select [Flash control].
N E-TTL II Flash Metering For normal flash exposures, set it to [Evaluative]. If [Average] is set, the flash exposure will be averaged for the entire metered scene. Depending on the scene, flash exposure compensation may be necessary. This setting is for advanced users. N Slow Synchro You can set the flash-sync speed for flash photography in or mode. ] 1/200-30sec. auto zz [ The flash sync speed is set automatically within a range of 1/200 sec. to 30 sec. to suit the scene’s brightness.
[Built-in flash settings] and [External flash func. setting]N You can set the functions in the table below. The functions displayed under [External flash func. setting] vary depending on the Speedlite model. zz Select [Built-in flash settings] or [External flash func. setting]. BBThe flash function setting screen will be displayed. With [Built-in flash settings], only the highlighted functions can be selected and set.
zz Flash mode When using an external Speedlite, you can select the flash mode to suit your desired photographic effects. zz [E-TTL II flash metering] is the standard mode of EL/EX‑series Speedlites for automatic flash photography. zz [Manual flash] is the mode for advanced users who want to set the [Flash output] (1/1 to 1/128) themselves. zz Regarding other flash modes, refer to the instruction manual of a Speedlite compatible with the respective flash mode.
Setting the External Speedlite Custom Functions N The Custom Functions displayed under [External flash C.Fn setting] vary depending on the Speedlite model. 1 Display the Custom Function. zz With the camera ready to shoot with an external Speedlite, select [External flash C.Fn setting], then press <0>. 2 Set the Custom Function. zz Press the keys to select the function number, then set the function. The procedure is the same as setting the camera’s Custom Functions (= 446).
Shooting with the LCD Monitor (Live View Shooting) You can shoot while viewing the image on the camera’s LCD monitor. This is called “Live View shooting”. zz If you handhold the camera and shoot while viewing the LCD monitor, camera shake may cause blurred images. Using a tripod is recommended in such cases. Remote Live View Shooting zz With EOS Utility (EOS software, = 482) installed on your computer, you can connect the camera to the computer and shoot remotely while viewing the computer screen.
Shooting with the LCD Monitor 1 Display the Live View image. zz Press the button. BBThe Live View image will appear on the LCD monitor. In the mode, the scene icon for the scene detected by the camera is displayed on the upper left of the screen (= 186). zz The Live View image will be displayed in the brightness level closely matching that of the actual image to be captured. 2 Focus on the subject.
zz The image’s field of view is approx. 100% (with image-recording quality set to JPEG 73 and aspect ratio set to 3:2). zz You can check the depth of field in Creative Zone modes by pressing the <0> or button when they are configured as described below. -- In [5: Custom Functions(C.Fn)], set [Assign SET button] to [7:Depth-offield preview]. -- In [5: Custom Functions(C.Fn)], set [DISP button function] to [1:Depthof-field preview].
zz When flash is used, there will be two shutter sounds, but only one shot will be taken. Also, the time it takes to take the picture after you press the shutter button completely will be longer than with viewfinder shooting. zz If the camera is not operated for a prolonged period, the power will turn off automatically after the time set in [5: Auto power off] (= 261). If [5: Auto power off] is set to [Disable], Live View shooting will end automatically after 30 min. (Camera power remains on.
Information Display zz Each time you press the button, the information display will change.
zz You can display the histogram by pressing the button. However, the histogram is not displayed while pressing the shutter button completely. zz When is displayed in white, it indicates that the Live View image is displayed at the brightness level closely matching that of the actual image to be captured. zz If is blinking, it indicates that the Live View image is displayed at a brightness that differs from the actual shooting result because of low- or bright-light conditions.
Scene Icons In the shooting mode, the camera detects the scene type and sets everything automatically to suit the scene. The detected scene type is indicated on the upper left of the screen.
Shooting Function Settings Function settings particular to Live View shooting are described here. Quick Control Press the button when an image is displayed to access the Quick Control screen, where you can adjust settings. 1 Press the button. BBThe settable functions will be displayed. 2 3 Select a function and set it. zz Press the keys to select a function. BBThe settings of the selected function and Feature guide (= 55) will appear on the screen.
Shooting with Creative Filter Effects N While viewing the Live View image, you can apply one of seven filter effects (Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, Water painting effect, Toy camera effect, and Miniature effect) for shooting. The camera saves only the image with the Creative filter applied. You can also take a picture without a Creative filter, then apply an effect afterward and save it as a new image (= 329). 1 Turn the Mode Dial to a Creative Zone mode.
zz When you set a Creative filter, single shooting will take effect even if the drive mode is set to . zz Shooting with Creative filters will prevent you from specifying RAW, AEB, white balance bracketing, or Multi Shot Noise Reduction. zz The histogram is not displayed when you shoot with Creative filters.
Creative Filter Characteristics zz G Grainy B/W Creates a grainy black-and-white photo. You can change the black-andwhite effect by adjusting the contrast. zz W Soft focus Gives the image a soft look. You can change the degree of softness by adjusting the blur. zz X Fish-eye effect Gives the effect of a fish-eye lens. The image will have a barrel-type distortion. Depending on the level of this filter effect, the area trimmed along the periphery of the image changes.
zz c Miniature effect Creates a diorama effect. If you want the image center to look sharp, take the picture without changing any setting. To move the area where you want to look sharp (miniature effect frame), see “Adjusting Miniature Effect” (= 98). 1-point AF is used as the AF method. Positioning the miniature effect frame over the AF point before shooting is recommended. zz With Grainy B/W, the grainy effect displayed on the LCD monitor will look different from the grainy effect recorded in the picture.
Menu Function Settings Setting items for Live View shooting are shown on the [z] and [5] tabs in Live View shooting. zz Still img aspect ratioN You can change the image’s aspect ratio. [3:2] is set by default. The area surrounding the Live View image is masked in black when the following aspect ratios are set: [4:3] [16:9] [1:1]. JPEG images will be saved with the set aspect ratio. RAW images will always be saved with the [3:2] aspect ratio.
Aspect Ratio and Pixel Count (Approx.) 3:2 4:3 16:9 1:1 5328×4000* 6000×3368* 4000×4000 6000×4000 73/83 (24 megapixels) (21.3 megapixels) (20.2 megapixels) (16 megapixels) 3984×2656 3552×2664 3984×2240* 2656×2656 74/84 (10.6 megapixels) (9.5 megapixels) (8.9 megapixels) (7.1 megapixels) 2976×1984 2656×1992 2976×1680* 1984×1984 7a/8a (5.9 megapixels) (5.3 megapixels) (5 megapixels) (3.9 megapixels) 2400×1600 2112×1600* 2400×1344* 1600×1600 b (3.8 megapixels) (3.4 megapixels) (3.2 megapixels) (2.
zz Grid when shooting With [3x3 l] or [6x4 m], you can display grid lines to help you level the camera vertically or horizontally. Also, with [3x3+diag n], the grid is displayed together with diagonal lines to help you compose with better balance by aligning the intersections over the subject. zz Selecting [z: Dust Delete Data] or either [Clean manually] or [Clean nowf] under [5: Sensor cleaning] will stop the Live View shooting. To start Live View shooting again, press the button.
Changing the Autofocus Operation N You can select the AF (autofocus) operation characteristics to suit the shooting conditions or subject. In Basic Zone modes, the optimum AF operation is set automatically for the respective shooting mode. 1 Press the button. BBThe Quick Control screen will appear. 2 Select [X]. zz Press the keys to select [X] (AF operation) on the left side of the screen. 3 Select the AF operation.
One-Shot AF for Still Subjects Suited for still subjects. When you press the shutter button halfway, the camera will focus only once. zz When focus is achieved, the AF point will turn green and the beeper will sound. zz The focus remains locked while you hold down the shutter button halfway, allowing you to recompose the image before taking the picture. zz For flash photography, the continuous shooting speed will become slower.
Focusing with AF Selecting the AF Method You can select an AF method to suit the shooting conditions and your subject. As the AF method, you can select [u (face)+Tracking] (= 198), [Spot AF], [1-point AF], or [Zone AF] (= 200). If you want to achieve precise focus, set the lens’s focus mode switch to , magnify the image, and focus manually (= 212). Select the AF method. zz Under the [z] tab, select [AF method]. zz Select the desired AF method, then press <0>.
Face+Tracking The camera detects and focuses on human faces. If a face moves, the AF point
also moves to track the face. 1 Check the AF point. zz When a face is detected,
will appear over the face to be focused on. zz If multiple faces are detected, will be displayed. Use to move over the face you want to focus on. zz You can also tap on the LCD monitor screen to select the face or subject. 2 Focus on the subject. zz Press the shutter button halfway to focus.
zz Focusing on a subject other than a human face Once the AF point achieves focus, the AF point will also move to track the subject if you change the composition or if the subject moves. zz If the subject’s face is significantly out of focus, face detection will not be possible. Adjust the focus manually (= 212) so that the face can be detected, then perform AF. zz An object other than a human face may be detected as a face.
Spot AF/1-Point AF/Zone AF You can manually set the AF point or Zone AF frame. Here, 1-point AF screens are used as an example. 1 Check the AF point. zz The AF point (1) will appear. zz With Zone AF, the Zone AF frame is displayed. (1) 2 Move the AF point. zz You can also move the AF point by touching the screen or pressing the cross keys. zz To center the AF point or Zone AF frame, press the button. zz To magnify display, press the button.
4 Take the picture. zz Press the shutter button completely to take the picture (= 181). zz Focusing may be difficult when using a peripheral AF point. In this case, select an AF point in the center. Notes for AF AF Operation zz Even when focus is achieved, pressing the shutter button halfway will focus again. zz The image brightness may change during and after the AF operation. zz Depending on the subject and shooting conditions, it may take longer to focus, or the continuous shooting speed may decrease.
Shooting Conditions that Make Focusing Difficult zz Subject with low-contrast such as the blue sky, solid-color flat surfaces or when highlight or shadow details are clipped. zz Subjects in low light. zz Stripes and other patterns where there is contrast only in the horizontal direction. zz Subjects with repetitive patterns (Example: Skyscraper windows, computer keyboards, etc.). zz Fine lines and subject outlines. zz Under a light source whose brightness, color, or pattern keeps changing.
Magnified View To check the focus when the AF method is other than [u+Tracking], magnify display by approx. 5× or 10× by pressing the button or tapping [Y] in the lower right. Magnified view is not available with [u+Tracking]. zz To move the AF point, press the cross keys or tap on the spot you want to magnify. zz Either press the button or tap on [Y] to magnify the area covered by the magnifying frame. Each time you press the button or tap on [Y], the magnification ratio changes.
Focusing on People’s Eyes With the AF method set to [u+Tracking], you can shoot with the subject’s eyes in focus. 1 Select [Eye Detection AF]. zz Under the [z] tab, select [Eye Detection AF], then press <0>. 2 Select [Enable]. 3 Aim the camera at the subject. BBAn AF point is displayed around their eye. zz You can tap the screen to select an eye for focus. The entire face is selected when you tap other facial features, such as their nose or mouth. Eyes to focus on are selected automatically.
Setting Continuous AF This function keeps subjects generally in focus. The camera is ready to focus immediately when you press the shutter button halfway. 1 Select [Continuous AF]. zz Under the [z] tab, select [Continuous AF], then press <0>. 2 Select [Enable]. zz Enabling this function reduces the number of shots available, because the lens is driven continuously and battery power is consumed.
Using the Self-timer 1 Select [Drive mode]. zz Under the [z] tab, select [Drive mode], then press <0>. 2 Select the self-timer. zz Press the keys to select the self-timer, then press <0>. m/Q: 10 sec./remote control self‑timer The picture is taken 10 seconds after you press the shutter button. Remote control shooting with the Wireless Remote Control BR-E1 (sold separately) is also possible (= 463). l: 2-sec. self-timer The picture is taken 2 seconds after you press the shutter button.
3 Take the picture. zz Focus on the subject, then press the shutter button completely. BBTo check operation, listen for beeps or watch the countdown display (in seconds) on the LCD monitor. BB2 sec. before the picture is taken, the beeper will sound faster. zz With , the interval between the multiple shots may be prolonged depending on the shooting functions settings such as the image-recording quality or flash.
Shooting with the Touch Shutter Just by tapping on the LCD monitor screen, you can focus and take the picture automatically. 1 Enable the Touch Shutter. zz Tap [y]. Each time you tap on the icon, it will toggle between [y] and [x]. zz [x] (Touch Shutter: Enable) The camera will focus on the spot you tap on, then the picture will be taken. zz [y] (Touch Shutter: Disable) You can tap on a spot to perform focusing on the spot (Touch AF). Press the shutter button completely to take the picture.
zz You can also set the Touch Shutter with [z: Touch Shutter]. zz To shoot with bulb exposure, tap on the screen twice. The first tap on the screen will start the bulb exposure. Tapping it again will stop the exposure. Be careful not to shake the camera when tapping on the screen.
Taking a Self Portrait (Selfie) The Self Portrait mode processes the image to suit human subjects. Before shooting, you can also specify background blurring, brightness, and skin smoothing. 1 Face the LCD monitor toward the front of the camera. zz As shown in the illustration, flip out the LCD monitor and face it toward the front of the camera (= 40). 2 Tap [ ] on the screen. zz Tap [ ] on the screen to activate Self Portrait mode. 3 Set the Self Portrait settings.
zz After the camera achieves focus, do not change the distance between you and the camera until the picture is taken. zz Be careful not to drop the camera. zz Flash photography is not possible. Try to prevent camera shake when shooting in low-light conditions. zz The Self Portrait mode will be canceled when you set the camera switch to <2> or do any of the following: -- Tapping [g] on the screen. -- Rotating the LCD monitor back to its original position. -- Pressing the button.
MF: Focusing Manually You can magnify the image and focus precisely with MF (manual focus). 1 Set the lens’s focus mode switch to . zz Turn the lens focusing ring to focus roughly. 2 Display the magnifying frame. zz Press the button. BBThe magnifying frame will appear. zz You can also tap [1] on the screen to magnify the image. 3 Move the magnifying frame. zz Press the cross keys to move the magnifying frame to where you want to focus.
5 Focus manually. zz While looking at the magnified image, turn the lens focusing ring to focus. zz After achieving focus, press the button to return to the normal view. 6 Take the picture. zz Check the focus and exposure, then press the shutter button to take the picture (= 181). zz In magnified view, the exposure is locked. (Shutter speed and aperture will be displayed in red.) zz Even with manual focusing, you can use the Touch Shutter to take a picture.
3 Set the level and color. zz Set it as necessary. zz Peaking display is not shown during magnified display. zz MF peaking may be hard to discern at high ISO speeds, especially when ISO expansion is set. If necessary, lower the ISO speed or set [Peaking] to [Off]. zz Peaking display shown on the LCD monitor is not recorded in images.
General Live View Shooting Cautions Image Quality zz When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable. zz Shooting in high temperatures may cause noise and irregular colors in the image. zz If Live View shooting is used continuously for a prolonged period, the camera’s internal temperature may rise, and image quality may deteriorate. Always exit Live View shooting when you are not shooting.
General Live View Shooting Cautions Live View Image zz Under low- or bright-light conditions, the Live View image may not reflect the brightness of the captured image. zz Even if a low ISO speed is set, noise may be noticeable in the displayed Live View image under low light. However, when you shoot, the image recorded will have less noise. (The image quality of the Live View image is different from that of the recorded image.
Shooting Movies Movie shooting is enabled by setting the power switch to . zz For cards that can record movies, see page 7. zz If you handhold the camera and shoot movies, camera shake can cause blurred movies. In such a case, using a tripod is recommended. zz To shoot while handholding the camera, see page 75.
Shooting Movies Connecting the camera to a TV set is recommended to play back the shot movies (= 305). Autoexposure Shooting When the shooting mode is set to any mode other than , autoexposure control will take effect to suit the scene’s current brightness. 1 Set the power switch to . BBThe reflex mirror will make a sound, then the image will appear on the LCD monitor. 2 Set the Mode Dial to a mode other than <8>, , or . 3 Focus on the subject.
zz General Movie Shooting Cautions are on = 257–= 258. zz If necessary, also read “General Live View Shooting Cautions” on = 215–= 216. zz In the and shooting modes, the settings will be the same as when shooting in the mode. zz Settable menu functions differ between Basic Zone modes and Creative Zone modes. zz Shutter speed, aperture and ISO speed are set automatically. zz In Creative Zone modes, you can press the button (= 164) to lock the exposure (AE lock).
zz When switching from still photo shooting to movie shooting, check the ISO speed settings again before shooting movies. Scene Icons During movie shooting in , an icon representing the scene detected by the camera will be displayed, and the shooting will be performed to suit the scene. For certain scenes or shooting conditions, the icon displayed may not match the actual scene.
Manual Exposure Shooting In the mode, you can manually set the shutter speed, aperture, and ISO speed for movie shooting. Using manual exposure to shoot movies is for advanced users. 1 Set the power switch to . BBThe reflex mirror will make a sound, then the image will appear on the LCD monitor. 2 Set the Mode Dial to . 3 Set the ISO speed. zz Press the button and press the keys or turn the <6> dial to select the ISO speed. zz For details on the ISO speed, see page 222.
ISO Speed During Manual Exposure Shooting zz With [AUTO], the ISO speed will be set automatically within ISO 100– ISO 12800. The maximum limit varies depending on the [Max for Auto] setting in [z:kISO Auto] setting (= 254). Note that when the camera is set for 4K movies, ISO speed is ISO 100–ISO 6400. zz You can set the ISO speed manually within ISO 100–ISO 12800 in whole-stop increments. Under [5: Custom Functions(C.
Information Display zz Each time you press the button, the information display will change.
(27) Exposure compensation (29) ISO speed (28) Highlight tone priority zz The grid lines, or histogram cannot be displayed during movie shooting. (The display will disappear when you start shooting a movie.) zz When movie shooting starts, the movie shooting remaining time will change to the elapsed time.
Still Photo Shooting Still photos cannot be taken during movie shooting. To take still photos, stop the movie shooting and take still photos using viewfinder shooting or Live View shooting. Cautions for Movie Shooting zz Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components.
Notes for Movie Shooting zz Each time you shoot a movie, a new movie file is created on the card. zz The movie’s field of view coverage for recording 4K, Full HD, and HD movies is approx. 100%. zz Stereo sound is recorded by the camera’s built-in microphones. zz If you connect the Directional Stereo Microphone DM-E1 (sold separately) to the camera’s external microphone IN terminal (= 28), the external microphone is given the priority. zz Most external microphones equipped with a 3.
Shooting Function Settings Function settings particular to movie shooting are described here. Quick Control If you press the button when the image is displayed on the LCD monitor, you can set AF method, Movie rec. size, Digital zoom, Movie digital IS, Video snapshot, White balance, Picture Style, Auto Lighting Optimizer, and Creative filters. Note that in Basic Zone modes, available items vary by shooting mode. 1 Press the button. BBThe settable functions will be displayed.
Setting the Movie Recording Size With [z: Movie rec. size], you can set the movie recording size (image size, frame rate, and compression method) and other functions. Movies will be recorded in the MP4 format. zz Image size L 3840x2160 The movie is recorded in 4K quality. The aspect ratio is 16:9. L 1920x1080 Full High-Definition (Full HD) recording quality. The aspect ratio is 16:9. w 1280x720 High-Definition (HD) recording quality. The aspect ratio is 16:9.
zz Frame rate (fps: frame per second) 6 29.97fps/8 59.94fps For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.). 5 25.00fps/7 50.00fps For areas where the TV system is PAL (Europe, Russia, China, Australia, etc.). 4 23.98fps Mainly for motion pictures. zz Compression method X IPB (Standard) Compresses multiple frames at a time efficiently for recording.
Movie Shooting Time Limit The maximum recording time per movie is 29 min. 59 sec. Once 29 min. 59 sec. is reached, recording automatically stops. You can start shooting a movie again by pressing the button. (The movie will be recorded as a new movie file.) zz When downloading movie files exceeding 4 GB to a computer, use either the EOS Utility (= 482) or a card reader (= 485).
Using Movie Digital Zoom When the recording size is L6X (NTSC) or L5X (PAL), you can shoot with an approx. 3x to 10x digital zoom. 1 Set the Mode Dial to a mode other than <8> or . 2 Select [Digital zoom]. zz Under the [z] tab, select [Digital zoom], then press <0>. 3 Select [Approx. 3-10x zoom]. zz Select [Approx. 3-10x zoom], then press <0>. zz Press the button to exit the menu and return to movie shooting. 4 Use digital zoom. zz Press the keys. BBThe digital zoom bar will appear.
Movie Digital IS The camera’s Movie digital IS feature reduces camera shake as movies are recorded. With Movie digital IS, images can be stabilized even when using a lens without Image Stabilizer. When using a lens equipped with Image Stabilizer, set the lens’s Image Stabilizer switch to <1>. 1 Select [Movie digital IS]. zz Under the [z] tab, select [Movie digital IS], then press <0>. 2 Select an item. zz Press the keys of the cross keys to select the item, then press <0>.
zz Movie digital IS will not function when the lens’s optical Image Stabilizer switch is set to <2>. zz With a lens whose focal length is longer than 800 mm, Movie digital IS will not function. zz Movie digital IS cannot be set in <8> or mode or when Movie digital zoom, time-lapse movie, or Creative filter is set. zz The wider the angle of view, the more effective the image stabilization will be. The narrower the angle of view, the less effective the image stabilization will be.
Recording HDR Movies You can reduce the clipped highlights of bright areas, which may make details hard to see, as you shoot movies even in high-contrast scenes. The recording size is L6X (NTSC) or L5X (PAL). 1 Set the Mode Dial to <8>. 2 Shoot an HDR movie. zz Since multiple frames are merged to create an HDR movie, certain parts of the movie image may look distorted. During handheld shooting, camera shake may make the distortion look more noticeable. Using a tripod is recommended.
Shooting Movies with Creative Filter Effects In the (Creative filters) mode, you can shoot movies with one of five filter effects (Dream, Old Movies, Memory, Dramatic B&W, and Miniature effect movie). The recording size can be set to L6 (NTSC) or L5 (PAL). 1 Set the Mode Dial to . 2 Press the button. BBThe Quick Control screen will appear. 3 Select [l]. zz Press the keys to select [l] (Shooting mode) on the upper left of the screen, then press <0>. 4 Select a filter effect.
5 Adjust the filter effect level. zz Press the button and select the icon below [Shooting mode]. zz Press the keys to adjust the effect, then press <0>. zz When the Miniature effect movie is set, select the playback speed. 6 Shoot the movie. zz Magnified view is not possible. zz The histogram is not displayed. zz Movie digital zoom, video snapshot, time-lapse movie, and Movie digital IS cannot be set. zz The color gradation of the sky or white walls may not be reproduced correctly.
zz o Miniature effect movie You can shoot movies having a Miniature (diorama) effect. Select the playback speed and shoot. If you want the image center to look sharp, record the movie without changing any setting. To move the area where you want to look sharp (miniature effect frame), see “Adjusting Miniature Effect” (= 98). 1-point AF is used as the AF method. Positioning the miniature effect frame over the AF point before shooting is recommended.
Shooting Time-lapse Movies Still photos shot at a set interval can be stitched together automatically to create a 4K or Full HD time-lapse movie. A time-lapse movie shows how a subject changes in a much shorter period of time than the actual time it took. It is effective for a fixed-point observation of changing scenery, growing plants, etc. Time-lapse movies will be recorded in MP4 format at the following quality: L6W (NTSC)/L5W (PAL) for 4K shooting, and L6W (NTSC)/L5W (PAL) for Full HD shooting.
6 Set the shooting interval. (1) (2) zz Select [Interval] (sec.). Use the keys to set a value, then press <0>. zz Refer to [k: Time required] (1) and [3: Playback time] (2) to set the number. When [Custom] is set zz Select [Interval] (min.:sec.). zz Press <0> so is displayed. zz Set the number, then press <0>. (Returns to .) zz Select [OK] to register the setting. 7 Set the number of shots. (1) (2) zz Select [No. of shots]. Use the keys to set a value, then press <0>.
8 Select the desired movie recording size. zz L (3840×2160) The movie is recorded in 4K quality. The aspect ratio is 16:9. The frame rate is 29.97 fps (6) for NTSC and 25.00 fps (5) for PAL, and movies are recorded in MP4 (C) format with ALL-I (W) compression. zz L (1920×1080) The movie will be recorded in Full High-Definition (Full HD) quality. The aspect ratio is 16:9. The frame rate is 29.97 fps (6) for NTSC and 25.00 fps (5) for PAL, and movies are recorded in MP4 (C) format with ALL-I (W) compression.
10 Configure [Screen auto off]. zz Disable Even during time-lapse movie recording, the image will be displayed. Note that the screen will turn off when approx. 30 min. elapse after the shooting started. zz Enable Note that the screen will turn off when approx. 10 sec. elapse after the shooting started. zz During time-lapse movie recording, you can press the button to turn on/off the screen. 11 Set the beeper. zz Select [Beep as img taken].
13 Exit the menu. zz Press the button to turn off the menu screen. 14 Double-check the time required and interval. zz Press the button and check again the “Time required (1)” and “Interval (2)” displayed on the screen. (1) (2) 15 Shoot the time-lapse movie. zz Press the button to start timelapse movie shooting. zz AF will not work during time-lapse movie shooting. zz While the time-lapse movie is recorded, “oREC” is displayed.
zz Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. zz Time-lapse movies cannot be recorded when the camera is connected to a computer with the interface cable, or when an HDMI cable is connected. zz Movie Servo AF will not function. zz Do not zoom the lens during time-lapse movie shooting.
zz Using a tripod is recommended. zz The movie’s field of view coverage for both the 4K and Full HD time-lapse movie recording is approx. 100%. zz To cancel the time-lapse movie shooting, press the button. The timelapse movie shot so far will be recorded on the card. zz You can play back the shot time-lapse movie with this camera the same way that you play back normal movies. zz If the time required for shooting is more than 24 hours but not more than 48, “2 days” will be indicated.
Recording Video Snapshots Record a series of short video snapshots, each a few seconds long, and the camera will combine them to create a video snapshot album that shows these highlights of your trip or event. Video snapshots are available when the movie recording size is set to L6X (NTSC) / L5X (PAL). A video snapshot album can also be played back together with background music (= 337).
4 Select [Album settings]. 5 Select [Create a new album]. zz Read the message and select [OK]. 6 Specify the playback time. zz Specify playback time per video snapshot. 7 Specify the playback effect. zz This setting determines how fast albums are played back. zz Note that with <8>, [Playback effect] is not available. 8 Check the required recording time. zz The time required to record each video snapshot is indicated (1), based on the playback time and effect.
9 Exit the menu. zz Press the button to exit the menu. BBA blue bar is displayed to indicate the shooting time (1). (1) Creating a Video Snapshot Album 10 Shoot the first video snapshot. zz Press the button, then shoot. BBThe blue bar indicating the shooting time will gradually decrease. After the set shooting duration elapses, the shooting stops automatically. BBThe confirmation screen will appear (= 248). 11 Save as a video snapshot album. zz Select [J Save as album], then press <0>.
13 Exit the video snapshot shooting. zz Set [Video snapshot] to [Disable]. To return to normal movie shooting, be sure to set [Disable]. zz Press the button to exit the menu, and return to the normal movie shooting. Options in Steps 11 and 12 Function Description The movie clip will be saved as the video snapshot album’s first video snapshot. The video snapshot just recorded will be added to J Add to album (Step 12) the album recorded immediately before.
Adding to an Existing Album 1 Select [Add to existing album]. zz Follow step 5 on = 246 to select [Add to existing album]. 2 Select an existing album. zz Press the keys to select an existing album, then press <0>. zz Select [OK]. BBCertain video snapshot settings will change to match the existing album’s settings. 3 Exit the menu. zz Press the button to exit the menu. BBThe video snapshot shooting screen will appear. 4 Shoot the video snapshot.
Menu Function Settings Setting items for recording movies are shown on the [z] and [5] tabs when the power switch is set to . zz Movie recording size (= 228) You can set the movie recording size (image size, frame rate, and compression method). zz Digital zoom (= 231) You can use digital zoom for telephoto shooting.
zz Sound recordingN (1) Normally, the built-in microphones will record the sound in stereo. If the Directional Stereo Microphone DM-E1 (sold separately) is connected to the camera’s external microphone IN terminal (= 28), the external microphone will be given the priority. (1) Level meter [Sound rec./Rec. level] options : The sound-recording level is adjusted automatically. [Auto] Auto level control will operate automatically in response to the sound level. [Manual] : For advanced users.
zz In Basic Zone modes, the settings available for [z: Sound recording] will be [On]/[Off]. If [On] is set, the sound-recording level will be adjusted automatically (same as with [Auto]), and the wind filter function will take effect. zz The sound volume balance between L (left) and R (right) cannot be adjusted. zz For both L and R, audio is recorded at a 48 kHz/16-bit sampling rate. zz Movie digital IS (= 232) Enables you to reduce camera shake as movies are recorded.
zz Movie Servo AF With this function enabled, the camera focuses on the subject continuously during movie shooting. The default setting is [Enable]. When [Enable] is set: -- The camera focuses on the subject continuously even when you are not pressing the shutter button halfway. -- If you want to keep the focus at a specific point or if you do not want the lens mechanical sound to be recorded, you can temporarily stop Movie Servo AF as follows. • Tap [Z] on the screen’s bottom left.
zz Lens electronic MFN (= 107) Can be specified when using lenses that support electronic manual focusing. zz Grid when shooting With [3x3 l] or [6x4 m], you can display grid lines to help you level the camera vertically or horizontally before shooting. Also, with [3x3+diag n], the grid is displayed together with diagonal lines to help you compose with better balance by aligning the intersections over the subject. Note that the grid is not displayed on the LCD monitor during movie shooting.
ISO Speed During Movie ShootingN You can set the ISO speed separately for still photo shooting and movie shooting. Set in [kISO speed settings] under the [z] tab. zz [ISO speed] In manual exposure, you can set the ISO speed (= 222). zz [Max for Auto] You can set the maximum limit of the automatic ISO speed for ISO Auto to ISO 6400 or ISO 12800. Under [5: Custom Functions(C.Fn)], if [ISO expansion] is set to [1:On], you can select [H(25600)].
Information Display for HDMI OutputN You can configure information display for image output via an HDMI cable. zz [With info] The image, shooting information, AF points, and other information is shown on the other device via HDMI. Note that the camera screen goes off. Recorded movies are saved to the card. zz [Clean / L output] HDMI output consists solely of 4K movies. Shooting information and AF points are also displayed on the camera, but no image is recorded to the card.
General Movie Shooting Cautions Red Internal Temperature Warning Icon zz If a red icon appears during movie recording, the card may be hot, so stop recording the movie and let the camera cool down before removing the card. (Do not remove the card immediately.) zz If the camera’s internal temperature increases due to prolonged movie shooting or under a high ambient temperature, a red icon will appear. zz The red icon indicates that movie shooting will soon be terminated automatically.
General Movie Shooting Cautions Recording and Image Quality zz If you use a card with a slow writing speed, a five-level indicator (1) may appear on the right of the screen during movie shooting. It indicates how much data has not yet been written to the card (remaining capacity of the internal buffer memory). The slower the card, the faster the indicator will climb upward. If the indicator becomes full, movie shooting will stop automatically.
Handy Features zz Disabling the Beeper (= 260) zz Card Reminder (= 260) zz Setting the Image Review Time (= 261) zz Setting the Auto Power Off Time (= 261) zz Adjusting the LCD Monitor Brightness (= 262) zz Creating and Selecting a Folder (= 263) zz File Numbering Methods (= 265) zz Setting the Copyright Information (= 268) zz Setting the Auto Rotation of Vertical Images (= 270) zz Reverting the Camera to the Default Settings (= 271) zz Turning the LCD Monitor Off/On (= 272) zz Automatic Sensor Cleaning (=
Handy Features Disabling the Beeper You can prevent the beeper from sounding when focus is achieved, during self-timer shooting, and during touch operations. Under the [5] tab, select [Beep], then press <0>. Select [Disable], then press <0>. To silence the beeper only for touch operations, select [Touch n]. Card Reminder This setting prevents shooting if there is no card in the camera. Under the [z] tab, select [Release shutter without card], then press <0>. Select [Disable], then press <0>.
Setting the Image Review Time You can change how long the image is displayed on the LCD monitor immediately after shooting. If [Off] is set, the image will not be displayed immediately after shooting. If [Hold] is set, the image review will be displayed up until the [Auto power off] time has elapsed. Note that during image review, if you operate any camera controls such as pressing the shutter button halfway, the image review will end. Under the [z] tab, select [Image review], then press <0>.
Adjusting the LCD Monitor Brightness You can adjust the brightness of the LCD monitor to make it easier to view. Under the [5] tab, select [Disp. brightness], then press <0>. Press the keys to adjust the brightness on the adjustment screen, then press <0>. When checking the exposure of an image, set the LCD monitor brightness to 4 and prevent the ambient light from affecting the image.
Creating and Selecting a Folder You can freely create and select the folder where the captured images are to be saved. This operation is optional since a folder will be created automatically for saving captured images. Creating a Folder 1 Select [Select folder]. zz Under the [5] tab, select [Select folder], then press <0>. 2 Select [Create folder]. zz Select [Create folder], then press <0>. 3 Create a new folder. zz Select [OK], then press <0>.
Selecting a Folder (1) (3) (2) (4) zz With the folder selection screen displayed, select a folder and press <0>. BBThe folder where the captured images will be saved is selected. zz Subsequently captured images will be recorded into the selected folder. (1) Number of images in folder (2) Lowest file number (3) Folder name (4) Highest file number Folders zz As with “100CANON” for example, the folder name starts with three digits (the folder number) followed by five alphanumeric characters.
File Numbering Methods The image files will be numbered from 0001 to 9999 in the order the images are taken, then saved in a folder. You can change how the file number is assigned. The file number will appear on your computer in this format: IMG_0001.JPG. In [File numbering] under the [5] tab, select [Numbering], then press <0>. The available settings are described below. Select the option, then press <0>.
zz [Auto reset]: When you wish to restart the file numbering from 0001 each time the card is replaced or a new folder is created. When you replace the card or create a folder, the file numbering restarts from 0001 for the new images saved. This is useful if you want to organize images by cards or folders.
zz [Manual reset]: When you wish to reset the file numbering to 0001 or to start from file number 0001 in a new folder. In [File numbering] under the [5] tab, select [Manual reset], then select [OK] on the confirmation dialog. When you reset the file numbering manually, a new folder is created automatically and the file numbering of images saved to that folder starts from 0001. This is useful, for example, if you want to use different folders for the images taken yesterday and the ones taken today.
Setting the Copyright Information N When you set the copyright information, it will be appended to the image as Exif information. 1 Select [Copyright information]. zz Under the [5] tab, select [Copyright information], then press <0>. 2 Select the item to be set. zz Select [Enter author’s name] or [Enter copyright details], then press <0>. 3 Enter text. (1) (2) zz Press the cross keys to move the □ and select the desired character. Then press <0> to enter it.
4 Exit the setting. zz After entering the text, press the button, then select [OK]. BBThe set information is saved. Checking the Copyright Information N When you select [Display copyright info.] in step 2, you can check the [Author] and [Copyright] information that you entered. Deleting the Copyright Information When you select [Delete copyright information] in step 2, you can delete the [Author] and [Copyright] information.
Setting the Auto Rotation of Vertical Images Images shot in vertical orientation are rotated automatically to the proper orientation for viewing, so they will not be displayed in horizontal orientation when played back on the camera’s LCD monitor or viewed on a computer screen. You can change the setting of this feature. Under the [5] tab, select [Auto rotate], then press <0>. The available settings are described below. Select the option, then press <0>.
Reverting the Camera to the Default Settings N The camera’s shooting function settings and menu settings can be reverted to their defaults. This option is available in Creative Zone modes. 1 Select [Clear settings]. zz Under the [5] tab, select [Clear settings], then press <0>. 2 Select [Clear all camera settings]. zz Select [Clear all camera settings], then press <0>. 3 Select [OK]. zz Select [OK], then press <0>.
Turning the LCD Monitor Off/On You can set the camera so that the LCD monitor does not turn off and on as you press the shutter button halfway (or press the button). Under the [5] tab, select [Screen off/on btn], then press <0>. The available settings are described below. Select the option, then press <0>. zz [Shutter btn.] : When you press the shutter button halfway, the display will turn off. When you let go of the shutter button, the display will turn on.
Automatic Sensor Cleaning Whenever you set the power switch to <1> or <2>, the Self Cleaning Sensor Unit is activated to automatically shake off the dust on the front of the sensor. Normally, you need not pay attention to this operation. However, you can manually perform sensor cleaning or can disable this unit as follows. Activating the Sensor Cleaning Manually 1 Select [Sensor cleaning]. zz Under the [5] tab, select [Sensor cleaning], then press <0>. 2 Select [Clean nowf].
Appending Dust Delete Data N Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that may be visible on captured images. However, for the case where visible dust still remains, you can append the Dust Delete Data to the image for erasing the dust spots later. The Dust Delete Data is used by Digital Photo Professional (EOS software, = 482) to erase the dust spots automatically. Preparation zz Prepare a solid white object such as a sheet of paper.
3 Shoot a solid-white object. zz At a distance of 20 cm–30 cm (0.7 ft.–1.0 ft.), fill the viewfinder with a patternless, solid-white object and take a picture. BBThe picture will be taken in aperturepriority AE mode at an aperture of f/22. zz Since the image will not be saved, the data can still be obtained even if there is no card in the camera. BBWhen the picture is taken, the camera will start collecting the Dust Delete Data. When the Dust Delete Data is obtained, a message will appear.
Manual Sensor Cleaning N Dust that could not be removed by the automatic sensor cleaning can be removed manually with a commercially-available blower, etc. Before cleaning the sensor, detach the lens from the camera. The image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. 1 Select [Sensor cleaning]. zz Under the [5] tab, select [Sensor cleaning], then press <0>. 2 Select [Clean manually].
zz When Multi Shot Noise Reduction is set, [Clean manually] cannot be selected. zz While cleaning the sensor, never do any of the following. If the power is cut off, the shutter will close and the shutter curtains and image sensor may get damaged. -- Setting the power switch to <2>. -- Removing or inserting the battery. zz The surface of the image sensor is extremely delicate. Clean the sensor with care. zz Use a plain blower without any brush attached. A brush can scratch the sensor.
HDMI Output Resolution Set the image output resolution used when the camera is connected to a television or external recording device with an HDMI cable. 1 Select [HDMI resolution]. zz Under the [5] tab, select [HDMI resolution], then press <0>. 2 Select an item. zz Press the keys to select the item, then press <0>. zz Auto The images will automatically be displayed at the optimum resolution matching the connected TV set. zz 1080p Output at 1080p resolution.
RAW Playback on an HDR TV You can view RAW images in HDR by connecting the camera to an HDR TV. 1 Select [HDMI HDR output]. zz Under the [5] tab, select [HDMI HDR output], then press <0>. 2 Select [On]. zz Press the keys to select [On]. zz Make sure the HDR TV is set up for HDR input. For details on how to switch inputs on the TV, refer to the TV manual. zz Depending on the TV used, images may not look as expected. zz Some image effects and information may not be displayed on an HDR TV.
Image Playback This chapter describes advanced usage of the playback methods described in “Basic Shooting and Image Playback” (= 69), how to play back and erase the captured images (still photos/movies), how to view them on a TV screen, and other playback-related functions. Images shot and saved with another device The camera may not be able to properly display images captured with a different camera, edited with a computer, or that have had their file names changed.
Searching for Images Quickly Display Multiple Images on One Screen (Index Display) Search for images quickly with the index display showing 4, 9, 36, or 100 images on one screen. 1 Play back the image. zz When you press the button, the last image captured will be displayed. 2 Switch to the index display. zz Press the button. BBThe 4-image index display will appear. The selected image is highlighted with an orange frame.
Jumping through Images (Jump Display) In the single-image display, you can turn the <6> dial to jump through the images forward or backward according to the jump method set. 1 Select [Image jump w/6]. zz Under the [x] tab, select [Image jump w/6], then press <0>. 2 Select the jump method. zz Press the cross keys to select the jump method, then press <0>.
3 Browse by jumping. zz Press the button to play back images. zz In the single-image display, turn the <6> dial. BBYou can browse by the set method.
Magnifying Images You can magnify a captured image by approx. 1.5x to 10x on the LCD monitor. 1 Magnify the image. (1) zz Press the button during image playback. BBThe image will be magnified. The magnified area position (1) will be displayed on the lower right of the screen. zz If you hold down the button, the image will be magnified until it reaches the maximum magnification. zz Press the button to reduce the magnification.
Playing Back with the Touch Screen The LCD monitor is a touch-sensitive panel that you can touch with your fingers for various playback operations. First, press the button to play back images. Browsing Images Swipe with one finger. zz With single-image display, touch the LCD monitor with one finger. You can browse to the next or previous image by swiping your finger to the left or right. Swipe to the left to see the next (newer) image, or swipe to the right to see the previous (older) image.
Reducing Image (Index Display) Pinch two fingers. Touch the screen with two fingers spread apart, and pinch your fingers together on the screen. zz Each time you pinch your fingers, the single-image display will change to the index display. zz When you select an image, the orange frame will appear. Tap on the image again to display it as a single image. Magnifying Image Spread two fingers apart. Touch the screen with two fingers together, then spread your fingers apart on the screen.
Rotating the Image You can use this feature to rotate the displayed image to the desired orientation. 1 Select [Rotate image]. zz Under the [x] tab, select [Rotate image], then press <0>. 2 Select an image. zz Press the keys to select the image to be rotated. zz You can also select an image in the index display (= 281). 3 Rotate the image. zz Each time you press <0>, the image will rotate clockwise as follows: 90° → 270° → 0°. zz To rotate another image, repeat steps 2 and 3.
Setting Ratings You can rate images (still photos and movies) with one of the five rating marks: l/m/n/o/p. This function is called rating. * Rating images can help you organize them. Rating a Single Image 1 Select [Rating]. zz Under the [x] tab, select [Rating], then press <0>. 2 Select [Select images]. BBAn image is displayed. 3 Select the image to be rated. zz Press the keys to select an image to be rated, then press <0>.
Specifying the Range You can specify the range of images to rate all the images in the range at once. 1 Select [Select range]. zz Select [Select range] in [x: Rating], then press <0>. 2 Specify the range of images. zz Select the first image (start point), then press <0>. zz Select the last image (end point), then press <0>. BBThe [X] icon will appear on the selected images. zz To cancel the selection, repeat this step. zz Pressing the button before you select an end point will clear the [X] icons.
Specifying All Images in a Folder or on a Card You can rate all the images in a folder or on a card at once. zz When you select [All images in folder] or [All images on card] in [x: Rating], all the images in the folder or on the card will be specified. zz Turn the <6> dial to select a rating mark, then select [OK]. zz To cancel the rating, select the [OFF] rating mark. zz A total of up to 999 images of a given rating can be displayed.
Filtering Images for Playback You can search for images by specifying the conditions and display the filtered images. You can also play back in a slide show, protect, or erase all the found images at once. 1 Select [Set image search conditions]. zz Under the [x] tab, select [Set image search conditions], then press <0>. 2 Set the search conditions. zz Press the keys to select the condition. zz Press the keys to set the setting. zz To cancel the condition, press the button.
3 Implement the search conditions. zz Press <0>. BBRead the message that appears and select [OK]. 4 Display the found images. zz Press the button to play back images. BBImages that match the set conditions will appear in a yellow frame. zz If there are no images matching the search conditions, pressing <0> on the screen in step 2 will not enable [OK]. (Cannot proceed to step 3.) zz Even if [5: Auto power off] is set to [4 min.] or less, the auto power off time will be approx. 6 min.
Quick Control for Playback During playback, you can press the button to set the following: [J: Protect images], [b: Rotate image], [9: Rating], [U: Creative filters], [S: Resize (JPEG images only)], [N: Cropping], [e: Image jump w/6], [t: Image search], [q: Send images to smartphone*], and [ : Creative Assist (RAW images only)]. For movies, only the following can be set: [J: Protect images], [9: Rating], [e: Image jump w/6], [t: Image search], [q: Send images to smartphone*], or [7: Play movie].
zz To cancel, press the button. 3 Exit the setting. zz Press <0> to exit Quick Control. zz To rotate an image (= 287), set [5: Auto rotate] to [OnzD]. If [5: Auto rotate] is set to [OnD] or [Off], the [b Rotate image] setting will be recorded to the image, but the camera will not rotate the image for display. zz For images taken with another camera, the options you can select may be restricted.
Enjoying Movies The three main ways to play back and enjoy movies are as follows: Playback on a TV Set (= 305) By connecting the camera to a TV set with an HDMI cable, you can play back the captured movies and still photos on the TV set. zz Since hard disk recorders do not have an HDMI IN terminal, the camera cannot be connected to a hard disk recorder with an HDMI cable. zz Even if the camera is connected to a hard disk recorder with a USB cable, movies and still photos cannot be played back or saved.
Playing Back Movies 1 Play back the image. zz Press the button to display an image. 2 Select a movie. zz Press the keys to select the movie to be played back. zz In the single-image display, the icon displayed on the upper left indicates a movie. zz In the index display, perforations at the left edge of a thumbnail indicate a movie. As movies cannot be played back from the index display, press <0> to switch to the single-image display. 3 In the single-image display, press <0>.
Movie Playback Panel Item Playback Operations 7 Play Pressing <0> toggles between playback and stop. 8 Slow motion Adjusts the slow motion speed by pressing the keys. The slow motion speed is indicated on the upper right of the screen. N Skip backward Skips backward approx. 4 sec. each time you press <0>. 3 Previous frame Displays the previous frame each time you press <0>. Holding <0> down will rewind the movie. 6 Next frame Plays the movie frame-by-frame each time you press <0>.
Movie Playback Panel (Video Snapshot Albums) Item Playback Operations 7 Play Pressing <0> toggles between playback and stop. 8 Slow motion Adjust the slow motion speed by pressing the keys. The slow motion speed is indicated on the upper right of the screen. N Previous clip Displays the first frame of the previous video snapshot. 3 Previous frame Displays the previous frame each time you press <0>. Holding <0> down will rewind the movie.
Playback with the Touch Screen Tap [7] at the center of the screen. BBThe movie will start playing back. zz To display the Quick Control screen, tap in the upper left. zz To pause the movie while it is playing back, tap on the screen. The movie playback panel will also appear. Editing a Movie’s First and Last Scenes You can edit out the first and last scenes of a movie in approx. 1-sec. increments. 1 Pause movie playback. BBThe movie playback panel will appear.
4 Check the edited movie. zz Select [7] to play the edited movie. zz To change the edited part, go back to step 2. zz To cancel the editing, press the button, then select [OK] on the confirmation dialog. 5 Save the edited movie. (1)(2) zz Select [W] (1), then press <0>. BBThe save screen will appear. zz To save it as a new movie, select [New file]. To save it and overwrite the original movie file, select [Overwrite], then press <0>. zz Select [ ] (2) to save a compressed version of the file.
Grabbing a Frame from 4K Movies or 4K Time-Lapse Movies From 4K movies or 4K time-lapse movies, you can select individual frames to save as approx. 8.3-megapixel (3840×2160) JPEG still images. This function is called “Frame Grab (4K frame capture)”. 1 Play back the image. zz Press the <3> button. 2 Select a 4K movie or 4K time-lapse movie. zz Select with the keys. zz On the shooting information screen (= 326), 4K movies and 4K time-lapse movies are indicated by an [L] icon.
6 Select [M]. zz Select with the keys. 7 Save the image. zz Select [OK] to save the current frame as a JPEG still image. 8 Select the image to display. zz Check the destination folder and image file number. zz Select [View original movie] or [View extracted still image]. zz Frame grabbing is not possible with Full HD movies, Full HD time-lapse movies, or with 4K movies or 4K time-lapse movies from a different camera.
Slide Show (Auto Playback) You can automatically play back all the images on the card one after another. 1 Select [Slide show]. zz Under the [x] tab, select [Slide show], then press <0>. (1) 2 Configure [Set up] as desired. zz Press the keys to select [Set up], then press <0>. zSet z the [Display time], [Repeat] (repeated playback), [Transition effect] (effect when changing images), and [Background music] for the still photos. zz See page 337 for the background music selection procedure.
3 Start the slide show. zz Press the keys to select [Start], then press <0>. BBAfter [Loading image...] is displayed, the slide show will start. 4 Exit the slide show. zz To exit the slide show and return to the setting screen, press the button. zz To pause the slide show, press <0>. During pause, [G] will be displayed on the upper left of the image. Press <0> again to resume the slide show. You can also pause the slide show by tapping on the screen.
Playback on a TV By connecting the camera to a TV set with an HDMI cable, you can play back the captured still photos and movies on the TV set. For the HDMI cable, HDMI Cable HTC-100 (sold separately) is recommended. If the image does not appear on the TV screen, check if the [5: Video system] is correctly set to [For NTSC] or [For PAL] (depending on the video system of your television). 1 Connect the HDMI cable to the camera.
zz Adjust movie sound volume with the TV set. The sound volume cannot be adjusted with the camera. zz Before connecting or disconnecting the cable between the camera and TV set, turn off the camera and TV set. zz Depending on the TV set, part of the image displayed may be cut off. zz Do not connect any other device’s output to the camera’s terminal. Doing so may cause a malfunction. zz Certain TV sets may not display the images due to incompatibility.
Protecting Images You can protect important images from being accidentally erased by the camera’s erase function. Protecting a Single Image 1 Select [Protect images]. zz Under the [3] tab, select [Protect images], then press <0>. 2 Select [Select images]. BBAn image is displayed. (1) 3 Select the image to be protected. zz Press the keys to select the image to be protected. 4 Protect the image. zz Press <0> to protect the image. The icon (1) will appear.
Specifying the Range of Images to be Protected You can specify the range of images to protect all the images in the range at once. 1 Select [Select range]. zz Select [Select range] in [x: Protect images], then press <0>. 2 Specify the range of images. zz Select the first image (start point), then press <0>. zz Select the last image (end point), then press <0>. BBThe images will be protected and the icon will appear. zz To cancel the selection, repeat this step.
Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [3: Protect images], all the images in the folder or on the card will be protected. To cancel the selection, select [Unprotect all images in folder] or [Unprotect all images on card]. zz If you format the card (= 66), the protected images will also be erased. zz Movies can also be protected.
Erasing Images You can either select and erase unnecessary images one by one or erase them in one batch. Protected images (= 307) will not be erased. zz Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them. Erasing an image shot in RAW+JPEG will erase both the RAW and JPEG images. Erasing a Single Image 1 Play back the image to be erased. 2 Press the button.
2 Select [Select and erase images]. BBAn image is displayed. 3 Select the images to be erased. zz Press the keys to select the image to be erased, then press <0>. BBA checkmark will be displayed on the upper left of the screen. zz By pressing the button, you can select images from a three-image display. To return to the single-image display, press the button. zz To select another image to be erased, repeat step 3. 4 Erase the images. zz Press the button.
Specifying the Range of Images to be Erased You can specify the range of images to erase all the images in the range at once. 1 Select [Select range]. zz Select [Select range] in [3: Erase images], then press <0>. 2 Specify the range of images. zz Select the first image (start point), then press <0>. zz Select the last image (end point), then press <0>. BBThe [X] icon will appear on the selected images. zz To cancel the selection, repeat this step.
Preparing to Print The direct printing procedure can be performed entirely with the camera while looking at the setting screens on camera’s LCD monitor. Connecting the Camera to a Printer 1 Set up the printer. zz For details, refer to the printer’s instruction manual. 2 Connect the camera to the printer. zz Connect them with an interface cable (sold separately). zz Connect the cable to the camera’s digital terminal with the cable plug’s icon facing the front of the camera.
4 Set the camera’s power switch to <1>. BBSome printers may make a beeping sound. BBThe image will appear with an icon on the upper left of the screen to indicate that the camera is connected to a printer. zz Before using the printer, make sure it has a PictBridge connection port. zz Movies cannot be printed. zz The camera cannot be used with printers compatible only with CP Direct or Bubble Jet Direct. zz If there is a long beeping sound in step 4, it indicates a problem with the printer.
Printing The screen display and setting options vary depending on the printer. Also, certain settings may not be available. For details, refer to the printer’s instruction manual. 1 Select the image to be printed. zz Check that the icon is displayed on the upper left of the LCD monitor. zz Press the keys to select the image to be printed. (1) (1) Printer-connected icon 2 Press <0>. BBThe print setting screen will appear. zz For setting details, see “Print Settings” (= 386).
Digital Print Order Format (DPOF) DPOF (Digital Print Order Format) enables you to print images recorded on the card according to your printing instructions such as the image selection, quantity to print, etc. You can print multiple images in one batch or create a print order for a photofinisher. You can set the print settings such as print type, date imprinting, file number imprinting, etc. The print settings will be applied to all the images specified for printing.
[Print type] Print type Date File number [Date] K Standard L Index K L Both On Off On Off [File No.] Prints one image on one sheet. Multiple thumbnail images are printed on one sheet. Prints both the standard and index prints. [On] imprints the recorded date of the captured image. [On] imprints the file number. 4 Exit the setting. zz Press the button. BBThe print order screen will reappear. zz Next, select [Sel.Image] or [Multiple] to order the images to be printed.
Specifying Images for Printing Selecting Images (1) (3) (4) (2) Select and specify the images one by one. By pressing the button, you can select images from a three-image display. To return to the single-image display, press the button. Press the button to save the print order to the card. zz [Standard] [Both] Press the keys to set the number of copies to be printed for the displayed image. (1) Quantity (2) Total images selected zz [Index] Press <0> to add a checkmark to the box [X].
Selecting Multiple Images zz Select Range 1 Select [Select range]. zz Select [Select range] in [Multiple], then press <0>. 2 Specify the range of images. zz Select the first image (start point), then press <0>. zz Select the last image (end point), then press <0>. BBThe [X] icon will appear on the selected images. One copy of all the specified images will be set for printing. zz To cancel the selection, repeat this step. zz To return to the previous screen, press the button.
Specifying Images for a Photobook You can specify up to 998 images to be printed in a photobook. When you use EOS Utility (EOS software) to transfer images to a computer, the specified images for the photobook will be copied to a dedicated folder. This function is useful for ordering photobooks online. Specifying One Image at a Time 1 Select [Photobook Set-up]. zz Under the [x] tab, select [Photobook Set-up], then press <0>. 2 Select [Select images]. BBAn image is displayed.
Specifying the Range You can specify the range of images to select all the images in the range at once for the photobook. 1 Select [Select range]. zz In [Multiple] under [x: Photobook Set-up], select [Select range], then press <0>. 2 Specify the range of images. zz Select the first image (start point), then press <0>. zz Select the last image (end point), then press <0>. BBThe [X] icon will appear on the selected images. zz To cancel the selection, repeat this step.
Specifying All Images in a Folder or on a Card You can also specify all the images in a folder or on a card at once for the photobook. When [Multiple] under [x: Photobook Set-up] is set to [All images in folder] or [All images on card], all the images in the folder or on the card will be specified for the photobook. To clear your selections, select [Clear all in folder] or [Clear all on card]. zz RAW images or movies cannot be specified.
Shooting Information Display The information displayed varies depending on the shooting mode and settings. Still Photo Example zz Basic information display (1) (9) (2) (3) (5) (7) (4) (6) (10) (11) (12) (8) (13) (1) Playback No.
zz Shooting information display -- Detailed information (1) (2) (3) (4) (9) (10) (5) (14) (6) (7) (11) (12) (13) (15) (8) (16) (1) Shooting date/time (10) White balance correction (2) Histogram (Brightness/RGB) (11) Picture Style setting details (3) Shooting mode (4) Shutter speed (12) Flash exposure compensation amount/Multi Shot Noise Reduction (5) Aperture (6) Exposure compensation level (7) ISO speed (8) Highlight tone priority (9) White balance (13) Metering mode (14
-- Lens/Histogram information (3) (1) (2) (4) (1) Lens name (2) Focal length (3) Histogram display (Brightness) (4) Histogram display (RGB) -- White balance information -- Picture Style information 1 -- Picture Style information 2 -- Color space/Noise reduction information -- Lens aberration correction information -- Record of sent images zz If you used GPS Receiver GP-E2 or smartphone to record GPS information for the image, the “GPS information” screen will also appear.
Movie Example (1) (2) (3) (4) (5) (6) (8) (10) (11) (7) (9) (1) Playback (6) Movie recording size (2) Aperture (7) Frame rate (3) Shutter speed (8) Compression method (4) Movie shooting mode / Time-lapse movie (9) Movie recording format Movie digital IS (11) Movie file size (5) (10) Shooting time, Playback time * If manual exposure is used, the shutter speed, aperture, and ISO speed (when set manually) will be displayed. * The icon will be displayed for video snapshots.
zz Highlight Alert When the shooting information is displayed, overexposed and clipped highlights will blink. To obtain a better result for the blinking areas where you want the gradation to be faithfully reproduced, set the exposure compensation to a negative amount and shoot again. zz Histogram The brightness histogram shows the exposure level distribution and overall brightness. The RGB histogram is for checking the color saturation and gradation. The display can be switched with [x: Histogram disp].
Post-Processing Images After taking a picture, you can apply a filter effect, resize the JPEG image (reduce the pixel count), or crop the JPEG image. zz The camera may not be able to process images taken with another camera. zz Post-processing of images as described in this chapter cannot be performed when the camera is connected to a computer with an interface cable.
Applying Creative Filter Effects You can apply the following Creative filters to an image and save it as a new image: Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, Water painting effect, Toy camera effect, and Miniature effect. 1 Select [Creative filters]. zz Under the [x] tab, select [Creative filters], then press <0>. BBAn image will be displayed. 2 Select an image. zz Select the image you want to apply a filter to.
5 Save the image. zz Select [OK] to save the image. zz Check the destination folder and image file number, then select [OK]. zz To apply a filter to another image, repeat steps 2 to 5. zz When shooting RAW+JPEG image, the Creative filter will be applied to the RAW image and the image will be saved as a JPEG image. zz If an aspect ratio was set for a RAW image and the filter effect is applied to it, the image will be saved in the aspect ratio that is set.
zz Z Water painting effect Makes the photo look like a watercolor painting with soft colors. You can control the color density by adjusting the filter effect. Note that night scenes or dark scenes may not be rendered with a smooth gradation and may look irregular or have significant noise. zz H Toy camera effect Darkens the photo’s corners and applies a unique color tone that makes it look as if it was shot by a toy camera. You can change the color cast by adjusting the color tone.
Applying Your Favorite Effects (Creative Assist) You can process RAW images by applying your preferred effects and saving as JPEGs. 1 Select [Creative Assist]. zz Under the [3] tab, select [Creative Assist], then press <0>. 2 Select an image. zz Use the keys to select images to process, then press <0>. 3 Select an effect level. zz Use the keys to select the effect. zz By selecting [Preset] and pressing <0>, you can choose [VIVID], [SOFT], or other preset effects.
zz You can select effects such as [Brightness] or [Contrast] by pressing <0> and then using the keys. zz Press <0> when adjustment is finished. zz To reset the effect, press the button. zz To confirm the effect, press the button. 4 Select [OK] to save the image.
Red-eye Correction Automatically corrects images affected by red-eye. You can save the corrected image as a separate file. 1 Choose [Red-eye correction]. zz Under the [3] tab, select [Red-eye correction], then press <0>. 2 Select an image. zz Press the keys to select the image. 3 Correct the image. zz Either touch [J] or press <0>. BBFrames are displayed around corrected image areas. 4 Select [OK]. zz The image is now saved as a new file. zz Some images may not be corrected accurately.
Editing Video Snapshot Albums 1 Select [Create album]. zz Under the [3] tab, select [Create album], then press <0>. 2 Select an album to edit. zz Press <0> to add a checkmark [X]. zz After selection, press the button. 3 Select [OK]. 4 Select an editing option. zz Press the keys to select an editing option, then press <0>.
Option T Rearrange video snapshots L Remove video snapshot 7 Play video snapshot Description Press the keys to select the video snapshot you want to move, then press <0>. Press the keys to move the snapshot, then press <0>. Press the keys to select the video snapshot you want to delete, then press <0>. The [L] icon will be displayed on the selected video snapshot. Pressing <0> again will cancel the selection and [L] will disappear.
Selecting the Background Music Albums and slideshows can be played with background music once you copy the music to the card, using EOS Utility (EOS software). 1 Select [Background music]. zz Set [Background music] to [On]. 2 Select the background music. zz Use the keys to select the music, then press <0>. For [Slide show], you can select multiple tracks. 3 Play the background music. zz To listen to a sample of the background music, press the button.
Resizing JPEG Images You can resize a JPEG image to make the pixel count lower and save it as a new image. Resizing an image is possible only with JPEG 3, 4, and a images. JPEGband RAW images cannot be resized. 1 Select [Resize]. zz Under the [3] tab, select [Resize], then press <0>. BBAn image will be displayed. 2 Select an image. zz Select the image you want to resize. zz By pressing the button, you can switch to the index display and select an image. 3 Select the desired image size.
Resize Options by Original Image Quality Original Image Quality 3 4 a 4 k Available Resize Settings a k k b k k k zz Images may be slightly cropped, depending on the combination of resizing and aspect ratio.
Cropping JPEG Images You can crop a captured JPEG image and save it as another image. Cropping an image is possible only with JPEG images. Images shot in RAW cannot be cropped. 1 Select [Cropping]. zz Under the [x] tab, select [Cropping], then press <0>. BBAn image will be displayed. 2 Select an image. zz Select the image you want to crop. zz By pressing the button, you can switch to the index display and select an image. 3 Set the cropping frame size, aspect ratio, position, and tilt correction.
Changing the Cropping Frame Aspect Ratio ]. zz Turn the <6> dial to select [ BBEach press of <0> changes the cropping frame aspect ratio. BBThis also enables you to crop the image shot in horizontal orientation to look as if it was shot in vertical orientation. Moving the Cropping Frame zz Press the or keys. BBThe cropping frame will move up, down, left, or right. zz You can also touch the cropping frame and drag it to the desired position.
zz The position and size of the cropping frame may change depending on the angle set for tilt correction. zz Once a cropped image is saved, it cannot be cropped again. In addition, you cannot resize it or apply a Creative filter. zz AF point display information (= 323) and Dust Delete Data (= 274) will not be appended to the cropped images.
Specifying Initial Image Display When Playback Begins You can specify which image is displayed first when you start image playback. 1 Select [View from last seen]. zz Under the [3] tab, select [View from last seen], then press <0>. 2 Select an item. zz Press the keys to select an option. zz [Enable]: Playback resumes from the last image displayed (except when you have just finished shooting). zz [Disable]: Playback resumes from your most recent shot whenever the camera is restarted.
Wireless Features This chapter describes how to connect the camera to a smartphone wirelessly via Bluetooth® or Wi-Fi® and send images to devices or Web services, as well as how to control the camera from a computer or wireless remote control.
What You Can Do via Wireless Communication Functions (5) Connect to a wireless remote control (CANON iMAGE GATEWAY) (1) Communicate with a smartphone (4) Upload to Web services (3) Print images using a Wi-Fi printer (2) Use with EOS software or other dedicated software Important Note that Canon cannot be held liable for any loss or damage from erroneous wireless communication settings when using the camera.
Tab Menus: Wireless Tab = 347 = 416 = 417 = 418 = 419 = 425 zz Wireless communication is not available while the camera is connected via an interface cable to a computer or other device. zz Other devices, such as computers, cannot be used with the camera by connecting them with an interface cable while the camera is connected to devices via Wi-Fi. zz The camera cannot be connected via Wi-Fi if there is no card in the camera (except for [D]).
Selection of Wi-Fi/Bluetooth Connection 1 Select [Wi-Fi/Bluetooth connection]. zz Under the [k] tab, select [Wi-Fi/ Bluetooth connection], then press <0>. 2 Select an item for the camera to connect to. (1) q Communicate with a smartphone (= 349) Control the camera remotely and browse images on the camera over a Wi-Fi connection by using the dedicated Camera Connect app on smartphones or tablets (collectively referred to as “smartphones” in this manual).
(4) R Send images to a Web service (= 391) Share images with friends or family on social media or the CANON iMAGE GATEWAY online photo service for Canon customers after you complete member registration (free of charge). (5) F Connect to a wireless remote control This camera can also be connected to Wireless Remote Control BR-E1 (sold separately) via Bluetooth for remote control shooting (= 410).
Connecting to a Smartphone You can do the following after pairing the camera with a smartphone compatible with Bluetooth low energy technology (hereafter, “Bluetooth”). zz Establish a Wi-Fi connection using only the smartphone (= 351). zz Establish a Wi-Fi connection with the camera even when it is off (= 356). zz Geotag images with GPS information acquired by the smartphone (= 420). zz Control the camera remotely from a smartphone (= 355).
Installing Camera Connect on a Smartphone The dedicated app Camera Connect (free of charge) must be installed on the smartphone on which Android or iOS is installed. zz Use the latest version of the smartphone OS. zz Camera Connect can be installed from Google Play or App Store. Google Play or App Store can also be accessed using the QR codes that appear when the camera is paired or connected via Wi-Fi to a smartphone.
Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Steps on the Camera (1) 1 Select [Wi-Fi/Bluetooth connection]. zz Under the [k] tab, select [Wi-Fi/ Bluetooth connection], then press <0>. 2 Select [qConnect to smartphone]. 3 Select [Add a device to connect to]. 4 Select an item. zz If Camera Connect is already installed, select [Do not display].
5 Select [Pair via Bluetooth]. zz Press <0> to start pairing. zz To pair with a different smartphone after pairing with one initially, select [OK] on the screen at left, then press <0>. Steps on the Smartphone (1) 6 Start Camera Connect. 7 Touch the camera for pairing. BBIf you are using an Android smartphone, go to step 9. 8 Tap on [Pair] (iOS only).
Steps on the Camera (2) 9 Select [OK], then press <0>. 10 Press <0>. zz Pairing is now complete, and the camera is connected to the smartphone via Bluetooth. A Bluetooth icon appears on the main Camera Connect screen. zz The camera cannot be connected to two or more devices at the same time via Bluetooth. To switch to a different smartphone for the Bluetooth connection, see = 423. zz Bluetooth connection consumes battery power even after the camera’s auto power off is activated.
Steps on the Smartphone (2) 11 Select and tap on a Camera Connect function. zz In iOS, tap [Join] when a message is displayed to confirm camera connection. zz For the Camera Connect functions, see = 355. zz When a Wi-Fi connection is established, the screen for the selected function will appear. zz [qWi-Fi on] is displayed on the camera’s LCD monitor. zz The Bluetooth and Wi-Fi icons are lit on the main Camera Connect screen. The Wi-Fi connection to a Bluetooth-compatible smartphone is now complete.
Camera Connect Functions Images on camera zz Images can be browsed, deleted, or rated. zz Images can be saved on a smartphone. Remote live view shooting zz Enables remote shooting as you view a live image on the smartphone. Auto transfer zz Enables camera and app setting adjustment to send shots to a smartphone automatically as they are captured (= 362). Bluetooth remote controller zz Enables remote control of the camera from a smartphone paired via Bluetooth. (Not available when connected via Wi-Fi.
Establishing a Wi-Fi Connection When the Camera Is Off Even with the camera power switch set to <2>, as long as the camera is paired with a smartphone via Bluetooth, you can use the smartphone to connect via Wi-Fi. 1 Select [Bluetooth settings]. zz Under the [k] tab, select [Bluetooth settings], then press <0>. 2 Set [Stay conn. if off] to [Enable]. zz With the camera power switch set to <2>, tap [Images on camera] in the Camera Connect menu to start the Wi-Fi connection.
Canceling the Pairing Cancel pairing with a smartphone as follows. 1 Select [Wi-Fi/Bluetooth connection]. zz Under the [k] tab, select [Wi-Fi/ Bluetooth connection], then press <0>. 2 Select [qConnect to smartphone]. zz If the history (= 413) is displayed, switch the screen with the keys. 3 Select [Edit/delete device]. 4 Select the smartphone to cancel paring with. zz Smartphones currently paired with the camera are labeled [ ].
5 Select [Delete connection information]. 6 Select [OK], then press <0>. 7 Clear the camera information on the smartphone. zz In the smartphone’s Bluetooth setting menu, clear the camera information registered on the smartphone.
Wi-Fi Connection Without Using Bluetooth Steps on the Camera (1) 1 Select [Wi-Fi/Bluetooth connection]. zz Under the [k] tab, select [Wi-Fi/ Bluetooth connection], then press <0>. 2 Select [qConnect to smartphone]. zz If the history (= 413) is displayed, switch the screen with the keys. 3 Select [Add a device to connect to]. 4 Select an item. zz If Camera Connect is already installed, select [Do not display].
5 Select [Connect via Wi-Fi]. (1) 6 Check the SSID (network name) and password. zz Check the SSID (1) and password (2) displayed on the camera’s LCD monitor. zz In [k: Wi-Fi settings], if you set [Password] to [None], the password will not be displayed or required (= 416). (2) zz By selecting [Switch network] in step 6, you can establish a Wi-Fi connection via an access point (= 405). Steps on the Smartphone Smartphone’s screen (sample) 7 Operate the smartphone to establish a Wi-Fi connection.
Steps on the Camera (2) 9 Select [OK]. zz To specify viewable images, press the button. See step 5 on = 371 to set them. zz The main window of Camera Connect will be displayed on the smartphone. The Wi-Fi connection to a smartphone is now complete. zz Operate the camera using Camera Connect (= 355). zz For how to terminate the Wi-Fi connection, see “Terminating Wi-Fi Connections” (= 370). zz To reconnect via Wi-Fi, see “Reconnecting via Wi-Fi” (= 413).
Automatic Image Transfer as You Shoot Your shots can be automatically sent to a smartphone. Before following these steps, make sure the camera and smartphone are connected via Wi-Fi. 1 Select [Wi-Fi settings]. zz Under the [k] tab, select [Wi-Fi settings], then press <0>. 2 Select [Send to smartphone after shot]. 3 In [Auto send], select [Enable]. 4 Set [Size to send]. 5 Take the picture.
Sending Images to a Smartphone from the Camera You can use the camera to send images to a smartphone paired via Bluetooth (Android devices only) or connected via Wi-Fi. 1 Play back the image. 2 Press the button. 3 Select [q]. zz If you perform this step while connected via Bluetooth, a message is displayed, and the connection switches to a Wi-Fi connection. 4 Select sending options and send the images.
(1) Sending Images Individually 1 Select an image to send. zz Use the keys to select an image to send, then press <0>. zz By pressing the button, you can switch to the index display and select an image. 2 Select [Send img shown]. zz In [Size to send], you can select the image sending size. zz When sending movies, you can select the image quality of movies to send in [Quality to send]. (2) Sending Multiple Selected Images 1 Press <0>. 2 Select [Send selected].
3 Select images to send. zz Use the keys to select images to send, then press <0>. zz You can press the button to select the images from 3-image display. To return to the single-image display, press . zz After selecting the images to send, press the button. 4 Exit image selection. zz Select [OK]. 5 Select [Size to send]. zz On the displayed screen, select an image size. zz When sending movies, select the image quality in [Quality to send]. 6 Select [Send].
(3) Sending a Specified Range of Images 1 Press <0>. 2 Select [Send range]. 3 Specify the range of images. zz Select the first image (start point). zz Select the last image (end point). zz To cancel the selection, repeat this step. zz You can press the button to change the number of images shown in the index display. 4 Confirm the range. zz Press the button, then press [OK]. 5 Select [Size to send]. zz On the displayed screen, select an image size.
6 Select [Send]. (4) Sending All Images on the Card 1 Press <0>. 2 Select [Send all card]. 3 Select [Size to send]. zz On the displayed screen, select an image size. zz When sending movies, select the image quality in [Quality to send]. 4 Select [Send].
(5) Sending Images that Match the Search Conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For [Set image search conditions], refer to “Filtering Images for Playback” (= 291). 1 Press <0>. 2 Select [Send all found]. 3 Select [Size to send]. zz On the displayed screen, select an image size. zz When sending movies, select the image quality in [Quality to send]. 4 Select [Send].
Ending Image Transfer Sending Images from the Camera When Paired via Bluetooth (Android) zz Press the button on the image transfer screen. zz Select [OK] on the screen on the left to end image transfer and the Wi-Fi connection. Sending Images from the Camera over a Wi-Fi Connection zz Press the button on the image transfer screen. zz To terminate the Wi-Fi connection, see “Terminating Wi-Fi Connections” (= 370).
Terminating Wi-Fi Connections Perform either of the following operations. On the Camera Connect screen, tap on [ ]. On the [qWi-Fi on] screen, select [Disconnect,exit]. zz If [qWi-Fi on] is not displayed, select [Wi-Fi/Bluetooth connection] under the [k] tab. zz Select [Disconnect,exit], then select [OK] on the confirmation dialog. Settings to Make Images Viewable from Smartphones Images can be specified after the Wi-Fi connection is terminated. 1 Select [Wi-Fi/Bluetooth connection].
4 Select a smartphone. zz Select the name of the smartphone on which you want to make the images viewable. 5 Select [Viewable imgs]. 6 Select an item. zz Select [OK] to access the setting screen. [All images] All images stored on the card become viewable. [Images from past days] Specify viewable images on the shootingdate basis. Images shot up to nine days ago can be specified.
[Select by rating] Specify viewable images depending on whether a rating is appended (or not appended) or by the type of rating. zz Once you select the type of rating, the viewable images are set. [File number range] (Select range) (1) (2) Select the first and last images from images arranged by the file number to specify the viewable images. 1. Press <0> to display the image selection screen. Press the keys to select the image.
zz If the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur. -- If the power switch is set to , movie shooting will continue. -- If the power switch is set to <1>, movie shooting will stop. zz When the power switch is set to <1> and the camera is set to the movie shooting mode using Camera Connect, you cannot operate the camera to shoot. zz With a Wi-Fi connection to a smartphone established, certain functions are unavailable.
Connecting to a Computer via Wi-Fi This section describes how to connect the camera to a computer via Wi-Fi and perform camera operations using EOS software or other dedicated software. Install the latest version of software on the computer before setting up a Wi-Fi connection. For computer operating instructions, refer to the computer user manual.
(1) 4 Check the SSID (network name) and password. zz Check the SSID (1) and password (2) displayed on the camera’s LCD monitor. zz In [k: Wi-Fi settings], if you set [Password] to [None], the password will not be displayed or required. For details, see = 416. (2) Steps on the Computer (1) Computer’s screen (sample) 5 Select the SSID, then enter the password. zz On the computer’s network setting screen, select the SSID checked in step 4. zz For the password, enter the password checked in step 4.
Steps on the Camera (2) 6 Select [OK]. BBThe following message is displayed. “******” represents the last six digits of the MAC address of the camera to be connected. Steps on the Computer (2) 7 Start EOS Utility. 8 In EOS Utility, click [Pairing over Wi-Fi/LAN]. zz If a firewall-related message is displayed, select [Yes]. 9 Click [Connect]. zz Select the camera to connect to, then click [Connect].
Steps on the Camera (3) 10 Establish a Wi-Fi connection. zz Select [OK]. [DWi-Fi on] Screen Disconnect,exit zz Terminates the Wi-Fi connection. Confirm set. zz You can check the settings. Error details zz When a Wi-Fi connection error occurs, you can check the details of the error. The Wi-Fi connection to a computer is now complete. zz Operate the camera using EOS Utility on the computer. zz To reconnect via Wi-Fi, see “Reconnecting via Wi-Fi” (= 413).
Sending Images on the Camera Automatically With the dedicated software Image Transfer Utility 2, you can send images on the camera to a computer automatically. Steps on the Computer (1) 1 Connect the computer and access point and start Image Transfer Utility 2. zz The screen to set up pairing is shown when you follow the instructions displayed the first time Image Transfer Utility 2 starts up. Steps on the Camera (1) 2 Select [Auto send images to computer].
4 Select [OK]. 5 Connect to an access point via Wi-Fi. zz Establish a Wi-Fi connection between the camera and the access point connected to the computer. For connection instructions, see “Wi-Fi Connection via Access Points” (= 405). 6 Select the computer to pair the camera with. Steps on the Computer (2) 7 Pair the camera and computer. zz Select the camera, then click [Pairing].
Steps on the Camera (2) 8 Select [Auto send images to computer]. zz Under the [k] tab, select [Wi-Fi settings], then press <0>. zz Select [Auto send images to computer]. 9 Select [Image sending options]. 10 Select what to send. zz If you select [Selected imgs] in [Range to send], specify the images to send on the [Select images to send] screen. zz After the settings are complete, turn the camera off.
Connecting to a Printer via Wi-Fi This section describes how to print images by directly connecting the camera to a printer supporting PictBridge (Wireless LAN) via Wi-Fi. For printer operating instructions, refer to the printer user manual. 1 Select [Wi-Fi/Bluetooth connection]. zz Under the [k] tab, select [Wi-Fi/ Bluetooth connection], then press <0>. 2 Select [lPrint from Wi-Fi printer]. zz If the history (= 413) is displayed, switch the screen with the keys.
5 Set up the printer. zz On the Wi-Fi settings menu of the printer to be used, select the SSID you have checked. zz For the password, enter the password checked in step 4. 6 Select the printer. zz In the list of detected printers, select the printer to connect to via Wi-Fi. zz If your preferred printer is not listed, selecting [Search again] may enable the camera to find and display it. zz To establish a Wi-Fi connection via an access point, see “Wi-Fi Connection via Access Points” (= 405).
Image Printing Printing Images Individually 1 Select the image to be printed. zz Use the keys to select an image to print, then press <0>. zz By pressing the button, you can switch to the index display and select an image. 2 Select [Print image]. 3 Print the image. zz For the print setting procedures, see = 386. zz Select [Print], then [OK] to start printing.
Printing According to Specified Image Options 1 Press <0>. 2 Select [Print order]. 3 Set the print options. zz For the print setting procedures, refer to “Digital Print Order Format (DPOF)” (= 316). zz If the print order is complete before establishing a Wi-Fi connection, go to step 4. 4 Select [Print]. zz [Print] can be selected only when an image is selected and the printer is ready to print. 5 Set the [Paper settings] (= 386). 6 Print the image. zz When [OK] is selected, printing starts.
zz zz zz zz zz zz Shooting is not possible while connected to a printer via Wi-Fi. Movies cannot be printed. Before printing, be sure to set the paper size. Certain printers may not be able to imprint the file number. If [Bordered] is set, certain printers may imprint the date on the border. Depending on the printer, the date may appear faint if it is imprinted on a bright background or on the border. zz RAW images cannot be printed by selecting [Print order]. When printing, select [Print image] and print.
Print Settings The screen display and setting options vary depending on the printer. Also, certain settings may not be available. For details, refer to the printer’s instruction manual. Print setting screen ( 1) (2) (3) (4) (5) (6) (7) (8) (1) Sets date or file number printing (= 388). (2) Sets the printing effects (= 388). (3) Sets the number of copies to print (= 388). (4) Sets the print area (= 389). (5) Sets the paper size, type, and layout (= 387). (6) Returns to the image selection screen.
[Q] Setting the Paper Size zz Select the size of the paper in the printer. [Y] Setting the Paper Type zz Select the type of the paper in the printer. [U] Setting the Page Layout zz Select the page layout. zz If the image’s aspect ratio is different from the printing paper’s aspect ratio, the image may be cropped significantly when you print it as a borderless print. Images may also be printed at lower resolution.
Setting the Date/File Number Imprinting zz Select [I]. zz Select what to print. Setting the Printing Effects (Image Optimization) zz Select [E]. zz Select printing effects. zz If you imprint shooting information on an image shot at an expanded ISO speed (H), the correct ISO speed may not be imprinted. zz The [Default] setting for printing effects and other options are the printer’s own default settings as set by the printer’s manufacturer.
Cropping the Image Set cropping immediately before printing. Changing other print settings after you crop images may require you to crop the images again. 1 On the print setting screen, select [Cropping]. 2 Set the cropping frame size, position, and aspect ratio. zz The image area within the cropping frame will be printed. The shape of the frame (aspect ratio) can be changed with [Paper settings]. Changing the Cropping Frame Size Use the buttons to resize the cropping frame.
zz Depending on the printer, the cropped image area may not be printed as you specified. zz The smaller the cropping frame, the lower the resolution at which images are printed. Handling Printer Errors zz If printing does not resume after you resolve a printer error (no ink, no paper, etc.) and select [Continue], operate the buttons on the printer. For details on resuming printing, refer to the printer’s instruction manual.
Sending Images to a Web Service This section describes how to use Web services to send images. Registering Web Services Use a smartphone or computer to add your Web services to the camera. zz A smartphone or computer with a browser and Internet connection is required to complete camera settings for CANON iMAGE GATEWAY and other Web services.
Registering CANON iMAGE GATEWAY Link the camera and CANON iMAGE GATEWAY by adding CANON iMAGE GATEWAY as a destination Web service on the camera. You will need to enter an email address used on your computer or smartphone. Steps on the Camera (1) 1 Select [Wi-Fi/Bluetooth connection]. zz Under the [k] tab, select [Wi-Fi/ Bluetooth connection], then press <0>. 2 Select [RUpload to Web service]. 3 Select [I Agree]. 4 Establish a Wi-fi connection. zz Connect to an access point via Wi-Fi.
5 Enter your email address. zz Enter your email address, then select [OK]. 6 Enter a four-digit number. zz Enter a four-digit number of your choice, then select [OK]. 7 Select [OK]. BBThe [R] icon changes to [ 393 ].
Steps on the Computer or Smartphone 8 Set up camera web link. zz Access the page in the notification message. zz Follow the instructions to complete the settings on the camera web link settings page. Steps on the Camera (2) 9 Add CANON iMAGE GATEWAY as a destination. zz Select [ ]. CANON iMAGE GATEWAY is now added.
Registering Other Web Services Steps on the Computer or Smartphone 1 Configure the Web service you want to use. zz Visit the CANON iMAGE GATEWAY website and access the camera web link settings page. zz Follow the on-screen instructions to complete settings for Web services you want to use. Steps on the Camera 2 Add the Web service you configured as a destination. zz Under the [k] tab, select [Wi-Fi/ Bluetooth connection], then press <0>. zz Select [ ].
Sending Images You can share images with your family and friends by sending images from the camera to a Web service registered on the camera or by sending Web links of the online albums. Connecting to Web Services via Wi-Fi 1 Select [Wi-Fi/Bluetooth connection]. zz Under the [k] tab, select [Wi-Fi/ Bluetooth connection], then press <0>. 2 Select a Web service. zz If the history (= 413) is displayed, switch the screen with the keys.
Sending Images Individually 1 Select an image to send. zz Use the keys to select an image to send, then press <0>. zz By pressing the button, you can switch to the index display and select an image. 2 Select [Send img shown]. zz In [Size to send], you can select the image sending size. zz On the screen after images are sent, select [OK] to end the Wi-Fi connection. zz When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree].
Sending Multiple Selected Images 1 Press <0>. 2 Select [Send selected]. 3 Select images to send. zz Use the keys to select an image to send, then press <0>. zz By pressing the button, you can select images from a three-image display. To return to the single-image display, press the button. zz After selecting the images to send, press the button.
4 Select [Size to send]. zz When YouTube is selected as the destination, [Size to send] is not displayed. zz On the displayed screen, select an image size. 5 Select [Send]. zz On the screen after images are sent, select [OK] to end the Wi-Fi connection. zz When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree]. zz To scroll the screen, use the keys.
Sending a Specified Range of Images Specify the range of images to send all the images in the range at once. 1 Press <0>. 2 Select [Send range]. 3 Specify the range of images. zz Select the first image (start point). zz Select the last image (end point). BBImages will be selected and [X] will appear. zz To cancel the selection, repeat this step. zz You can press the button to change the number of images shown in the index display. 4 Confirm the range. zz Press the button.
6 Select [Send]. zz On the screen after images are sent, select [OK] to end the Wi-Fi connection. zz When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree]. zz To scroll the screen, use the keys. Sending All Images on the Card 1 Press <0>. 2 Select [Send all card].
3 Select [Size to send]. zz On the displayed screen, select an image size. 4 Select [Send]. zz On the screen after images are sent, select [OK] to end the Wi-Fi connection. zz When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree]. zz To scroll the screen, use the keys.
Sending Images that Match the Search Conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For [Set image search conditions], refer to “Filtering Images for Playback” (= 291). 1 Press <0>. 2 Select [Send all found]. 3 Select [Size to send]. zz On the displayed screen, select an image size.
4 Select [Send]. zz On the screen after images are sent, select [OK] to end the Wi-Fi connection. zz When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree]. zz To scroll the screen, use the keys. zz With a Wi-Fi connection to a Web service established, a picture cannot be taken even if the camera’s shutter button is pressed.
Wi-Fi Connection via Access Points This section describes how to join a Wi-Fi network via an access point compatible with WPS (PCB mode). First, check the position of the WPS button and how long to press it. It may take approx. one minute to establish a Wi-Fi connection. 1 Select [Wi-Fi/Bluetooth connection]. zz Under the [k] tab, select [Wi-Fi/ Bluetooth connection], then press <0>. 2 Select an item. zz If the history (= 413) is displayed, switch the screen with the keys.
4 Select [Switch network]. zz Displayed when [q], [D], or [l] is selected. 5 Select [Connect with WPS]. zz For [Camera access point mode] displayed in step 5, see = 408. 6 Select [WPS (PBC mode)]. zz Select [OK]. 7 Connect to the access point via Wi-Fi. zz Press the access point’s WPS button. zz Select [OK]. 8 Select [Auto setting]. zz Select [OK] to access the setting screen for the Wi-Fi function. zz If an error occurs with [Auto setting], see = 428.
9 Specify the settings for the Wi-Fi function. [qConnect to smartphone] zz On the smartphone’s Wi-Fi setting screen, tap the SSID (network name) shown on the camera, then enter the password of the access point for the connection. Go to step 8 on = 360. [DRemote control (EOS Utility)] Go to step 7 or 8 on = 376. [lPrint from Wi-Fi printer] Go to step 6 on = 382. Registering CANON iMAGE GATEWAY Go to step 5 on = 393.
Send To Screen A screen to select a destination may be displayed depending on the Web service. To register destinations or to specify the settings, you must use a computer. For more information, refer to the EOS Utility Instruction Manual. zz The [Send to] screen may be displayed. zz Select the destination from the list of registered destinations. zz The procedures for setting up a connection and sending images are the same as those for other Web services.
2 Select an item. zz Select an item to access the screen for numerical input. zz To use a gateway, select [Enable], then select [Address]. 3 Enter the desired values. zz Turn the <6> dial to move the input position in the upper area and use the keys to select the number. Press <0> to enter the selected number. zz To set the entered values and return to the screen for step 2, press the button. 4 Select [OK]. zz When you have completed setting the necessary items, select [OK].
Connecting to a Wireless Remote Control This camera can also be connected to Wireless Remote Control BR-E1 (sold separately) via Bluetooth for remote control shooting (= 463). 1 Select [Wi-Fi/Bluetooth connection]. zz Under the [k] tab, select [Wi-Fi/ Bluetooth connection], then press <0>. 2 Select [F Connect to Wireless Remote]. 3 Select [Add a device to connect to]. 4 Pair the devices.
Still Photo Shooting Movie Shooting 5 Enable remote control shooting. zz Set [Drive mode] under the [z] tab to [Q] (= 112). zz In [Remote control] under the [z] tab, select [Enable]. zz For instructions after the pairing is complete, refer to the BR-E1’s Instruction Manual. zz Bluetooth connections consume battery power even after the camera’s auto power off is activated. zz When you do not use Bluetooth function, setting it to [Disable] in step 1 is recommended.
Cancelling the Paring To pair with another BR-E1, clear the connection information of the remote controller currently connected. 1 Select [Wi-Fi/Bluetooth connection]. zz Under the [k] tab, select [Wi-Fi/ Bluetooth connection], then press <0>. 2 Select [F Connect to Wireless Remote]. 3 Select [Delete connection information]. 4 Select [OK].
Reconnecting via Wi-Fi Follow these steps to reconnect to devices or Web services with registered connection settings. 1 Select [Wi-Fi/Bluetooth connection]. zz Under the [k] tab, select [Wi-Fi/ Bluetooth connection], then press <0>. 2 Select an item. zz Select the item to connect to via Wi-Fi from the displayed history. If the item is not displayed, use the keys to switch screens. zz If [Connection history] is set to [Hide], the history will not be displayed (= 416).
[l] Printer zz If the printer’s connection destination has been changed, restore the setting to connect via Wi-Fi to the camera or the same access point as the camera. When directly connecting the camera to a printer via Wi-Fi, “_Canon0A” is displayed at the end of the SSID.
Registering Multiple Connection Settings You can register up to 10 connection settings for the wireless communication functions. 1 Select [Wi-Fi/Bluetooth connection]. zz Under the [k] tab, select [Wi-Fi/ Bluetooth connection], then press <0>. 2 Select an item. zz If the history (= 413) is displayed, switch the screen with the keys. zz For details on [qConnect to smartphone], see “Connecting to a Smartphone” (= 349).
Wi-Fi Settings 1 Select [Wi-Fi settings]. zz Under the [k] tab, select [Wi-Fi settings], then press <0>. 2 Select an item. zz Wi-Fi When the use of electronic devices and wireless devices is prohibited, such as on board airplanes or in hospitals, set it to [Disable]. zz Password Set to [None] to allow a Wi-Fi connection to be established without a password (except when connecting to an access point via Wi-Fi).
Bluetooth Settings 1 Choose [Bluetooth settings]. zz Under the [k] tab, select [Bluetooth settings], then press <0>. 2 Select an item. zz Bluetooth If you will not use the Bluetooth function, select [Disable]. zz Check connection information You can check the name and communication status of the paired device. zz Bluetooth address You can check the camera’s Bluetooth address. zz Stay conn. if off Displayed after the camera is paired with a smartphone via Bluetooth.
Changing the Nickname You can change the camera nickname (displayed on smartphones and other cameras) as needed. 1 Choose [Nickname]. zz Under the [k] tab, select [Nickname], then press <0>. 2 Enter text using the virtual keyboard (= 427). zz When you finish entering characters, press the button, then select [OK].
Geotagging Images with GPS Information from Other Devices You can geotag images with GPS Receiver GP-E2 (sold separately) or a Bluetooth enabled smartphone. GP-E2 1 Attach the GP-E2 to the camera. zz Attach GP-E2 to the camera’s hot shoe and turn it on. For details, refer to the GP-E2 Instruction Manual. 2 Select [GPS device settings]. zz Under the [k] tab, select [GPS device settings], then press <0>. 3 In [Select GPS device], select [GPS receiver]. 4 Take the picture.
Smartphone Complete these settings after installing the dedicated Camera Connect app (= 350) on the smartphone. 1 Turn on the smartphone’s location information function. 2 Connect to Bluetooth. zz Connect the camera to a smartphone via Bluetooth (= 351). 3 Select [GPS device settings]. zz Under the [k] tab, select [GPS device settings], then press <0>. 4 Select [Smartphone] in [Select GPS device]. zz After these settings are complete, start Camera Connect. 5 Take the picture.
GPS Connection Display You can check the status of smartphone location information acquisition in the GPS connection icon on the screens for still photo or movie shooting (= 184 and = 223, respectively). zz Gray: Location services are off. zz Blinking: Location information cannot be acquired. zz On: Location information acquired. Regarding the GPS connection indicator status for when the GP-E2 is used, refer to the GP-E2 Instruction Manual.
zz The smartphone can acquire location information only when the camera is connected to a smartphone via Bluetooth. zz Direction information is not acquired. zz The acquired location information may not be accurate depending on the travel conditions and the smartphone’s status. zz It may take some time to acquire location information from the smartphone after you turn the camera on. zz Location information is no longer acquired after any of the following operations.
Changing or Deleting Connection Settings To change or delete the connection settings, terminate the Wi-Fi connection first. 1 Select [Wi-Fi/Bluetooth connection]. zz Under the [k] tab, select [Wi-Fi/ Bluetooth connection], then press <0>. 2 Select an item. zz If the history (= 413) is displayed, switch the screen with the keys. 3 Select [Edit/delete device]. zz You can change the Bluetooth connection by selecting a smartphone labeled with [ ] in gray.
5 Select an item. zz Change or delete the connection settings on the displayed screen. zz Change device nickname You can change the nickname using the virtual keyboard (= 427). zz Viewable imgs (= 370) Displayed when [qConnect to smartphone] is selected. Settings will appear at the bottom of the screen. zz Delete connection information When deleting connection information for a paired smartphone, also delete the camera information registered on the smartphone (= 357).
Clearing Wireless Communication Settings to Default All wireless communication settings can be deleted. By deleting the wireless communication settings, you can prevent their information from being exposed when you lend or give your camera to other people. 1 Select [Clear wireless settings]. zz Under the [k] tab, select [Clear wireless settings], then press <0>. 2 Select [OK]. zz Performing [5: Clear all camera settings] does not delete the wireless communication setting information.
View Info Screen You can check error details and the camera’s MAC address. 1 Select [Wi-Fi/Bluetooth connection]. zz Under the [k] tab, select [Wi-Fi/ Bluetooth connection], then press <0>. 2 Press the button. BBThe [View info] screen will appear. zz When an error has occurred, press <0> to display the error content.
Virtual Keyboard Operation (1) (2) (3) (4) (5) (6) (1) Input area, for entering text (2) Cursor keys, for moving in the input area (3) Current no. of characters/no. available (4) Keyboard (7) (8) (5) Switch input modes (6) Space (7) Delete a character in the input area (8) Finish the text entry zz Press the cross keys to move within 2 and 4–7. zz Press <0> to confirm input or when switching input modes.
Responding to Error Messages When an error occurs, display the details of the error by following one of the procedures below. Then, eliminate the cause of the error by referring to the examples shown in this chapter. zz On the [View info] screen, press <0> (= 426). zz Select [Error details] on the [Wi-Fi on] screen. Click the error code number’s page in the following chart to jump to the corresponding page.
11: Connection target not found zz In the case of [q], is Camera Connect running? BBEstablish a connection using Camera Connect (= 360). zz In the case of [D], is the EOS software running? BBStart the EOS software and reestablish the connection (= 376). zz In the case of [l], is the power of the printer on? BBTurn on the printer.
21: No address assigned by DHCP server What to check on the camera zz On the camera, IP address is set to [Auto setting]. Is this the correct setting? BBIf no DHCP server is used, specify the settings after setting the IP address to [Manual setting] on the camera (= 408). What to check on the DHCP server zz Is the power of the DHCP server on? BBTurn on the DHCP server. zz Are there enough addresses for assignment by the DHCP server? BBIncrease the number of addresses assigned by the DHCP server.
22: No response from DNS server What to check on the camera zz On the camera, does the DNS server’s IP address setting match the server’s actual address? BBSet the IP address to [Manual setting]. Then, on the camera, set the IP address that matches the address of the DNS server used (= 408, = 442). What to check on the DNS server zz Is the power of the DNS server on? BBTurn on the DNS server.
23: Device with same IP address exists on selected network What to check on the camera zz Do the camera and another device connected via Wi-Fi to the same network have the same IP address? BBChange the camera’s IP address to avoid using the same address as another device on the network. Otherwise, change the IP address of the device that has a duplicate address. BBIf the camera’s IP address is set to [Manual setting] in network environments using a DHCP server, change the setting to [Auto setting] (= 406).
61: Selected SSID wireless LAN network not found zz Are any obstacles blocking the line of sight between the camera and the antenna of the access point? BBMove the antenna of the access point to a position clearly visible from the point of view of the camera (= 439). What to check on the camera zz Does the SSID set on the camera match that of the access point? BBCheck the SSID at the access point, then set the same SSID on the camera.
63: Wireless LAN authentication failed zz Are the camera and the access point set to use the same authentication method? BBThe camera supports the following authentication methods: [Open system], [Shared key], and [WPA/WPA2-PSK]. zz Are the camera and the access point set to use the same password for authentication? BBThe setting is case-sensitive, so check upper- and lower-case characters. Make sure that the correct password for authentication is set on the camera.
65: Wireless LAN connection lost zz Are any obstacles blocking the line of sight between the camera and the antenna of the access point? BBMove the antenna of the access point to a position clearly visible from the point of view of the camera (= 439). zz The Wi-Fi connection was lost for some reason, and the connection cannot be restored.
68: Cannot connect to wireless LAN terminal. Retry from the beginning. zz Did you hold down the access point’s WPS (Wi-Fi Protected Setup) button for the specified period of time? BBHold down the WPS button for the period of time specified in the access point’s instruction manual. zz Are you trying to establish a connection near the access point? BBTry establishing the connection when both devices are within reach of each other. 69: Multiple wireless LAN terminals have been found. Cannot connect.
125: Check the network settings zz Is the network connected? BBCheck the connection status of the network. 126: Could not connect to server zz CANON iMAGE GATEWAY is under maintenance or load is concentrated temporarily. BBTry connecting to the Web service again later. 127: An error has occurred zz A problem other than error code number 121 to 126 occurred while the camera is connected to the Web service. BBTry again to establish the Wi-Fi connection to the Web service. 141: Printer is busy.
151: Transmission canceled zz Automatic image transfer to the computer was somehow interrupted. BBTo resume automatic image transfer, set the camera’s power switch to <2>, and then set it to <1>. 152: Card’s write protect switch is set to lock zz Is the card’s write protect switch set to the locked position? BBSlide the card’s write protect switch to the writing position.
Wireless Communication Function Notes If the transmission rate drops, the connection is lost, or other problems occur when using the wireless communication functions, try the following corrective actions. Distance Between the Camera and the Smartphone If the camera is too far from the smartphone, a Wi-Fi connection may not be established even when Bluetooth connection is possible. In this case, bring the camera and the smartphone closer together, then establish a Wi-Fi connection.
Cautions for Using Multiple Cameras zz When connecting multiple cameras to one access point via Wi-Fi, make sure the cameras’ IP addresses are different. zz When multiple cameras are connected to one access point via Wi-Fi, the transmission rate drops. zz When there are multiple IEEE 802.11b/g/n (2.4 GHz band) access points, leave a gap of five channels between each Wi-Fi channel to reduce radio wave interference. For example, use channels 1, 6, and 11, channels 2 and 7, or channels 3 and 8.
Security If security settings have not been properly set, the following problems may occur. zz Transmission monitoring Third parties with malicious intent may monitor the Wi-Fi transmissions and attempt to acquire the data you are sending. zz Unauthorized network access Third parties with malicious intent may gain unauthorized access to the network you are using to steal, modify, or destroy information.
Checking Network Settings zz Windows Open the Windows [Command Prompt], then type ipconfig/all and press the key. In addition to the IP address assigned to the computer, the subnet mask, gateway, and DNS server information are also displayed. zz Mac OS In Mac OS X, open the [Terminal] application, enter ifconfig -a, and press the key. The IP address assigned to the computer is indicated in the [en0] item next to [inet], in the format “***.***.***.***”.
Wireless Communication Status Wireless communication status can be checked on the LCD monitor.
Bluetooth Function Indicator Bluetooth function Connection status Other than [Disable] [Disable] LCD monitor Bluetooth connected Bluetooth not connected Bluetooth not connected Not displayed zz “ Bluetooth connected” status is indicated when connected to smartphones via Wi-Fi and during automatic image transfer to computers. zz “Bluetooth not connected” status is indicated when connected to computers, printers, or Web services via Wi-Fi.
Customizing the Camera You can make fine adjustments to various camera functions to suit your picture-taking preferences with Custom Functions. Custom Functions can be set and work only in Creative Zone modes.
Setting Custom Functions N 1 Select [Custom Functions(C.Fn)]. zz Under the [5] tab, select [Custom Functions(C.Fn)], then press <0>. (1) 2 Select the Custom Function number (1). zz Press the keys to select the Custom Function number, then press <0>. 3 Change the setting as desired. zz Press the keys to select the desired setting (number), then press <0>. zz Repeat steps 2 to 3 if you want to set other Custom Functions.
Custom Functions C.Fn I: Exposure 1 2 3 4 Exposure level increments ISO expansion Safety shift Exposure compensation auto cancel C.Fn II: Drive 5 Mirror lockup = 448 = 448 = 448 = 449 A LV Shooting k k k Movie Shooting k k k k k = 449 C.
Custom Function Setting Items N Custom Functions are organized into three groups based on the function type: C.Fn I: Exposure, C.Fn II: Drive, C.Fn III: Operation/Others. C.Fn I: Exposure C.Fn-1 Exposure level increments 0: 1/3-stop 1: 1/2-stop Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc. Useful when 1/3-stop increments are too fine. zz When set to 1, exposure level display is as follows in the viewfinder. C.
C.Fn-4 Exposure compensation auto cancel 0: Enable When you set the power switch to <2>, the exposure compensation setting will be canceled. 1: Disable The exposure compensation setting will remain in effect even if you set the power switch to <2>. C.Fn II: Drive C.Fn-5 Mirror lockup 0: Disable 1: Enable You can prevent the camera vibration blur due to the mechanical vibrations (mirror shock) inside the camera during shooting with super telephoto lenses or shooting close-ups (macro photography).
C.Fn III: Operation/Others C.Fn-6 Warnings in viewfinder When any of the following functions are set, the icon can be displayed on the viewfinder’s bottom left (= 32). The icon will also appear on the Quick Control screen (= 57). Select the function for which you want the warning icon to appear, press <0> to add a checkmark [X], then select [OK]. When monochrome V set: If the Picture Style is set to [Monochrome] (= 121), the warning icon will appear.
C.Fn-7 Shutter/AE lock button 0: AF/AE lock 1: AE lock/AF This is convenient when you want to focus and meter separately. Press the button to autofocus, and press the shutter button halfway to apply AE lock. 2: AF/AF lock, no AE lock During AI Servo AF (or Servo AF for Live View shooting), you can press the button to pause the AF operation momentarily. This prevents the AF from being thrown off by any obstacle passing between the camera and subject.
C.Fn-8 Assign SET button You can assign a frequently-used function to <0>. When the camera is ready to shoot, pressing the <0> button will display the respective function setting screen. 0: Quick Control screen The Quick Control screen (= 57) will appear. 1: Image quality The image quality setting screen will appear. 2: Flash exposure comp. The flash exposure compensation setting screen will appear. 3: Screen On/Off You can turn on or off the LCD monitor. 4: Menu display The menu screen will appear.
C.Fn-9 DISP button function You can assign a frequently used function to the button. When the camera is ready to shoot, pressing the button will display the respective function setting screen. 0: Screen On/Off You can turn on or off the LCD monitor. 1: Depth-of-field preview The lens will stop down to the set aperture, and you can see the range of acceptable focus (depth of field) in the viewfinder or in the Live View image.
C.Fn-11 Retract lens on power off This is the setting for the lens retraction mechanism when a gear-driven STM lens (such as EF40mm f/2.8 STM) is attached to the camera. You can set it to retract the extended lens automatically when the camera’s power switch is set to <2>. 0: Enable 1: Disable zz With auto power off, the lens will not retract regardless of the setting. zz Before detaching the lens, make sure that it is retracted.
Registering My Menu N Under My Menu tab, you can register menu items and Custom Functions whose settings you change frequently. You can also name the registered menu tabs, and press the button to display the My Menu tab first. zz When [s: Menu display] is set to [Guided], the [9] tab will not be displayed. Change the [Menu display] to [Standard] (= 53). Creating and Adding My Menu Tab 1 Select [Add My Menu tab]. zz Under the [9] tab, select [Add My Menu tab], then press <0>. 2 Select [OK].
2 Select [Select items to register]. 3 Register the desired items. zz Select the desired item, then press <0>. zz Select [OK] on the confirmation dialog. zz You can register up to six items. zz To return to the screen in step 2, press the button. My Menu Tab Settings You can sort and delete items under the menu tab, and rename or delete the menu tab. zz Sort registered items You can change the order of the registered items in My Menu.
zz Rename tab You can rename the My Menu tab from [MY MENU*]. 1 Select [Rename tab]. 2 Enter text. zz Press the button to delete any unnecessary characters. zz Press the cross keys to move the □ and select the desired character. Then press <0> to enter it. zz By selecting [ ], you can change the input mode. zz You can enter up to 16 characters. zz To move the cursor, select [ ] or [ ] in the upper right or turn the <6> dial. zz To cancel the text entry, press the button, then select [Cancel].
Deleting All My Menu Tabs / Deleting All Items You can delete all the created My Menu tabs or My Menu items registered under them. zz Delete all My Menu tabs You can delete all My Menu tabs you created. When you select [Delete all My Menu tabs], all the tabs from [MY MENU1] to [MY MENU5] will be deleted and the [9] tab will revert to its default. zz Delete all items You can delete all the items registered under the [MY MENU1] to [MY MENU5] tabs. The tab(s) will remain.
Reference This chapter provides reference information for camera features, system accessories, etc. Certification Logo zz Select [5: Certification Logo Display] and press <0> to display some of the logos of the camera’s certifications. Other certification logos can be found in this Instruction Manual, on the camera body, and on the camera’s package.
Checking the Battery Information You can check the conditions of the battery you are using on the LCD monitor. Select [Battery info.]. zz Under the [5] tab, select [Battery info.], then press <0>. (1) (2) (3) (4) (1) Battery position (2) Battery model or household power source being used. (3) The battery level (= 42) is displayed. (4) Battery’s recharge performance level is displayed in three levels. :B attery’s recharge performance is fine.
Using a Household Power Outlet You can power the camera with a household power outlet by using the DC Coupler DR-E18 and AC Adapter AC-E6N (each sold separately). 1 Connect the DC coupler’s plug. zz Connect the DC coupler’s plug to the AC Adapter’s socket. 2 Connect the power cord. (2) (1) zz Connect the power cord as shown in the illustration. zz After using the camera, unplug the power plug from the power outlet. 3 Insert the DC coupler.
zz Do not connect or disconnect the power cord when the camera’s power switch is set to <1>.
Remote Control Shooting Wireless Remote Control BR-E1 (Sold Separately) You can shoot remotely up to approx. 5 m/16.4 ft from the camera. After pairing the camera and BR-E1, set the drive mode to [Q](= 112). For operating instructions, refer to the BR-E1 Instruction Manual. Remote Switch RS-60E3 (Sold Separately) The camera is compatible with the Remote Switch RS-60E3 that comes with an approx. 60 cm/2.0 ft cord.
Removing the Eyecup zz Push the bottom of the eyecup to detach it.
Troubleshooting Guide If a problem occurs with the camera, first consult this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center. Power-Related Problems The battery does not recharge. zz Do not use any battery other than genuine Canon Battery Pack LP-E17. The battery charger’s lamp blinks.
[Battery communication error. Does this battery/do these batteries display the Canon logo?] is displayed. zz Do not use any battery other than genuine Canon Battery Pack LP-E17. zz Remove and install the battery again (= 37). zz If the electrical contacts are dirty, use a soft cloth to clean them. The battery becomes exhausted quickly. zz Use a fully-charged battery (= 35). zz The battery performance may have degraded. See [5: Battery info.] to check the battery’s recharge performance level (= 460).
Shooting-Related Problems The lens cannot be attached. zz The camera cannot be used with RF or EF-M lenses (= 47). No images can be shot or recorded. zz Make sure the card is properly inserted (= 37). zz Slide the card’s write-protect switch to the Write/Erase setting (= 37). zz If the card is full, replace the card or delete unnecessary images to make space (= 37, = 310). zz You cannot take a picture when focus indicator in the viewfinder blinks during focusing with One-Shot AF.
I cannot lock the focus and recompose the shot. zz Set the AF operation to One-Shot AF. Focus lock is not possible in the AI Servo AF mode or when servo takes effect in AI Focus AF mode (= 195). Horizontal stripes appear, or the exposure or color tone look strange. zz Horizontal stripes (noise) or irregular exposures can be caused by fluorescent lighting, LED lighting, or other light sources during viewfinder or Live View shooting. Also, the exposure or color tone may not come out right.
Expanded ISO speeds cannot be selected. zz When [z: Highlight tone priority] is set to [Enable] or [Enhanced], the ISO speed range is ISO 200–25600 (up to ISO 12800 for movies or 6400 for 4K movies), even if [ISO expansion] is set to [1:On]. If [Disable] is set for [z: Highlight tone priority], [H] can be set (= 137). This also applies to movie shooting (= 222). The Auto Lighting Optimizer cannot be set.
The shutter makes two release sounds during Live View shooting. zz If you use flash, the shutter will make two release sounds each time you shoot (= 182). During Live View shooting, a white s or red E icon is displayed. zz It indicates that the camera’s internal temperature is high. If the white icon is displayed, the still photo’s image quality may deteriorate. If the red icon is displayed, it indicates that the Live View shooting will soon stop automatically (= 215).
The subject looks distorted during movie shooting. zz If you move the camera to the left or right or shoot a moving subject, the image may look distorted. The image flickers or horizontal stripes appear during movie shooting. zz Flickering, horizontal stripes (noise), or irregular exposures can be caused by fluorescent lighting, LED lighting, or other light sources during movie shooting. Also, changes in the exposure (brightness) or color tone may be recorded.
Operations such as shooting and playback are not possible. zz With a Wi-Fi connection established, operations such as shooting and playback may not be possible. Terminate the Wi-Fi connection, then perform the operation. Cannot reconnect to a smartphone. zz Even with a combination of the same camera and smartphone, if you have changed the settings or selected a different setting, reconnection may not be established even after selecting the same SSID.
Display Problems The menu screen shows fewer tabs and options. zz Certain tabs or menu options are not displayed in Basic Zone modes. Set the shooting mode to a Creative Zone mode (= 59). zz Under the [9] tab, [Menu display] is set to [Display only My Menu tab] (= 458). The file name’s first character is an underscore (“_”). zz Set the color space to sRGB. If Adobe RGB is set, the first character will be an underscore (= 145). The file name starts with “MVI_”. zz It is a movie file (= 267).
The LCD monitor does not display a clear image. zz If the LCD monitor is dirty, use a soft cloth to clean it. zz In low or high temperatures, the LCD monitor display may seem slow or may look black. It will return to normal at room temperature. Playback Problems Part of the image blinks in black. zz It is the highlight alert (= 327). Overexposed areas with clipped highlights will blink. The image cannot be erased. zz If the image is protected, it cannot be erased (= 307). The movie cannot be played back.
There are multiple movie files for a single movie shoot. zz If the movie file size reaches 4 GB, another movie file will be created automatically (= 229). However, if you use an SDXC card formatted with the camera, you can record a movie in a single file even if it exceeds 4 GB. My card reader does not recognize the card. zz Depending on the card reader used and the computer’s operating system, SDXC cards may not be correctly recognized.
Sensor Cleaning Problems The shutter makes a sound during sensor cleaning. zz When you select [Clean nowf], the shutter will make a mechanical sound, but no picture is taken (= 273). Automatic sensor cleaning does not work. zz If you repeatedly turn the power switch <1> and <2> within a short time period, the icon may not be displayed (= 41). Computer Connection Problems Communication between the connected camera and computer does not work.
Error Codes (1) If there is a problem with the camera, an error message will appear. Follow the onscreen instructions. (1) Error number (2) Cause and countermeasures (2) Number 01 02 Error Message and Solution Communications between the camera and lens is faulty. Clean the lens contacts. Clean the electrical contacts on the camera and lens, use a Canon lens, or remove and install the battery again. Card cannot be accessed. Reinsert/change card or format card with the camera.
Trademarks zz Adobe is a trademark of Adobe Systems Incorporated. zz Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. zz Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. zz SDXC logo is a trademark of SD-3C, LLC. zz HDMI, HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
About MPEG-4 Licensing “This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video. No license is granted or implied for any other use for MPEG-4 standard.” * Notice displayed in English as required.
Use of Genuine Canon Accessories Is Recommended This product is designed to achieve optimum performance when used with genuine Canon accessories. Therefore, using this product with genuine accessories is highly recommended. Canon shall not be liable for any damage to this product and/or accidents such as malfunction, fire, etc. caused by the failure of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery).
Software Start Guide / Downloading Images to a Computer 481
Software Overview Downloading and Installing the Software When using EOS software or other dedicated software, use the latest version available. To download it, you will need to enter the serial number on the bottom of the camera. zz Do not connect the camera to a computer before you install the software. The software will not be installed correctly. zz You cannot install the EOS software to a computer without an Internet connection. zz Previous versions cannot display images from this camera correctly.
Downloading and Viewing the Software Instruction Manuals (PDF Files) Internet connection is required to download the Software Instruction Manuals (PDF files). Download is not possible in environments with no Internet connection. 1 Download the Software Instruction Manuals (PDF files). zz Connect to the Internet and access the following Canon Web site. www.canon.com/icpd 2 View the Software Instruction Manuals (PDF files). zz Double-click a downloaded Instruction Manual (PDF file) to open it.
Downloading Images to a Computer You can use EOS software to download images from the camera to a computer. There are two ways to do this. Saving Images to a Connected Computer 1 Install the software (= 482). 2 Use an interface cable (sold separately) to connect the camera to the computer. zz Connect the cable to the camera’s digital terminal with the cable plug’s icon facing the front of the camera. zz Connect the cord’s plug to the computer’s USB terminal.
Downloading Images with a Card Reader You can use a card reader to download images to a computer. 1 Install the software (= 482). 2 Insert the card into the card reader. 3 Use Digital Photo Professional to download the images. zz Refer to the Digital Photo Professional Instruction Manual. zz When downloading images from the camera to a computer with a card reader without using EOS software, copy the DCIM folder on the card to the computer.
Index Numbers 1-point AF : 108, 197, 200 [4K] 3840×2160 (Movie) : 228 4K frame capture : 301 9-point AF auto selection : 108 10- or 2-sec.
Center-weighted average metering : 159 Charger : 33, 35 Charging : 35 Chromatic aberration correction : 143 Cleaning (image sensor) : 273, 276 Clearing the camera settings to default : 271 Clipped highlights : 327 Close-up : 85 Color space : 145 Color temperature : 129 Color tone : 86, 87, 125 Continuous : 265 Continuous shooting : 112 Contrast : 125 Copyright information : 268 Creative Assist : 76, 332 Creative filters : 93, 188, 235, 329 Creative filters for movies : 235 Dramatic B&W : 236 Dream : 236 Mem
Manual flash : 178 Shutter synchronization (1st/2nd curtain) : 178 Slow synchro : 176 Flash exposure compensation : 171 Flash mode : 177, 178 Flash sync contacts : 28 Focus indicator : 70 Focusing → AF Focus lock : 74 Focus mode switch : 47, 111, 212 Folder creation/selection : 263 Food : 86 Formatting : 66 Formatting (card initialization) : 66 Frame Grab : 301 Frame rate : 229 Full High-Definition (Full HD) : 228 Full High-Definition (Full HD) (movie) : 228 Fully-press : 50 G GPS : 419 Grainy B/W : 95, 19
Maximum limit setting for ISO Auto : 120 Zone AF : 200 Location information : 419 Long (bulb) exposures : 157 Long exposure noise reduction : 139 J JPEG : 115 Jump display : 282 M K Kids : 84 L Landscape : 82, 122 Language : 46 Large (image quality) : 115, 338 LCD monitor : 26, 40 Angle adjustment : 40, 75 Brightness adjustment : 262 Image playback : 101, 280 Menu display : 59 Lens : 27, 47 Chromatic aberration correction : 143 Diffraction correction : 144 Digital Lens Optimizer : 143 Distortion correc
Autoexposure : 218 Compression method : 229 Creative filters : 235 Editing : 299 Editing out first and last scenes : 299 Enjoying movies : 295 External microphone : 251 Frame Grab : 301 Frame rate : 229 Grid lines : 254 HDMI output : 278 HDR movie recording : 234 Information display : 223 Manual exposure : 221 Metering timer : 252 Microphone : 218, 251 Movie digital IS : 232 Movie digital zoom : 231 Movie recording size : 228 Movie Servo AF : 253 Playback : 295, 296 Quick Control : 227 Sound recording : 251
S Saturation : 125 Scene icons : 186, 220 Scene Intelligent Auto : 70 SD, SDHC, SDXC cards → Cards Second-curtain synchronization : 178 Self portrait : 210 Self-timer : 206 Sensitivity → ISO speed Sensor cleaning : 273, 276 Sepia (Monochrome) : 126 Servo AF AI SERVO (AI Servo AF) : 74, 106 Movie Servo AF : 253 SERVO (Servo AF) : 196 Sharpness : 125 Shooting information : 323 Shooting mode : 30 (Scene Intelligent Auto) : 70 Av (Aperture-priority AE) : 152 Creative filters : 93 Fish-eye effect : 95 Grain
Tripod socket : 28 Tv (Shutter-priority AE) : 149 U USB (digital) terminal : 484 UTC (Coordinated Universal Time) : 422 V Vari-angle LCD monitor : 40, 75 Video snapshot : 245 Video snapshot album : 245 Video system : 228, 305 Viewfinder : 32 Dioptric adjustment : 49 Viewing on a TV set : 295, 305 Volume (movie playback) : 297, 298 W Warning icon : 450 Water painting effect : 95, 190, 331 White balance : 129 Ambience priority (AWB) : 130 Bracketing : 134, 162 Correction : 133 Custom : 131 White priority (
CT2-D002-A © CANON INC.