ENGLISH Advanced User Guide
Introduction Before Starting to Shoot, Be Sure to Read the Following To avoid shooting problems and accidents, first read the “Handling Precautions” (=31) and “Safety Instructions” (=28). Also, read this manual carefully to ensure that you use the camera correctly. Refer to This Manual while Using the Camera to Further Familiarize Yourself with the Camera While reading this manual, take a few test shots and see how they come out. You can then better understand the camera.
Item Check List Before starting, check that all the following items are included with your camera. If anything is missing, contact your dealer. Camera (with body cap) Battery Pack LP-E17 (with protective cover) Battery Charger LC-E17E* Strap * Battery Charger LC-E17E comes with a power cord. zz The camera does not come with a memory card (=11), interface cable, or HDMI cable. zz For details on the Advanced User Guide and Instruction Manuals, see “Instruction Manuals” (=4).
Instruction Manuals The Instruction Manual included with the camera provides basic instructions for the camera and Wi-Fi functions. The Advanced User Guide (this PDF file), which provides complete instructions, can be downloaded from the Canon website to a computer or other device. Downloading the Advanced User Guide/Instruction Manuals The Advanced User Guide and Instruction Manuals for lenses and software (PDF files) can be downloaded from the Canon website to a computer or other device.
Instruction Manuals Downloading the Advanced User Guide/Instruction Manuals Using QR Code The Advanced User Guide and Instruction Manuals for lenses and software (PDF files) can be downloaded to a smartphone or tablet using the QR code. www.canon.com/icpd zz A software app is required to read the QR code. zz Select your country or region of residence, then download the Advanced User Guide/Instruction Manuals. zz Select [5: Manual/software URL] to display the QR code on the camera screen.
Quick Start Guide 1 Insert the battery (=42). zz Upon purchase, charge the battery to start using (=40). 2 Insert the card (=42). zz Insert the card with the label facing the front of the camera. 3 Attach the lens (=49). zz Align the white mount index on the lens with the white mount index on the camera to attach the lens. zz Remove the lens cap. 4 Prepare to shoot. (2) 6 (1) zz Press (1) as you turn (2) slightly, and then release (1). zz Turn (2) a little more until it clicks.
Quick Start Guide 5 Set the power switch to <1> (=47). 6 Set the focus mode switch to . zz stands for autofocus. zz stands for manual focus. Autofocus will not operate. 7 Set the Mode dial to (=70). zz All the necessary camera settings will be set automatically. 8 Focus on the subject (=58). zz [p] (an AF point) appears over any face detected. zz Press the shutter button halfway, and the camera will focus on the subject.
Quick Start Guide 9 10 Take the picture (=58). zz Press the shutter button completely to take the picture. Review the picture. zz The image just captured will be displayed for approx. 2 sec. on the screen. zz To display the image again, press the button (=304). zz To view the images captured so far, see “Image Playback” (=304). zz To delete images, see “Erase Images” (=327).
About This Manual Icons in this Manual : Indicates the Main dial. <6> : Indicates the Quick control dial. <5> : Indicates the corresponding direction on the cross keys. : Indicates the control dial. <5> : Indicates the Quick Control/Setting button. <0> : Indicates the duration (in * seconds) of the * operation for the button you pressed, as timed after you release the button.
About This Manual Basic Assumptions for Operational Instructions, Sample Photos zz Before following any instructions, make sure the power switch is set to <1> (=47). zz It is assumed that all the menu settings and Custom Functions are set to their defaults. zz The illustrations in this manual show the camera attached with the EF-M15-45mm f/3.5-6.3 IS STM lens as an example. zz The sample photos displayed on the camera and used in this manual are for instructional purposes only.
Compatible Cards The following cards can be used with the camera regardless of capacity. If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera (=490). zz SD/SDHC/SDXC memory cards UHS-II and UHS-I cards supported. Cards that Can Record Movies When recording movies, use a high-capacity card with ample performance (fast enough writing and reading speeds) for the movie recording size. For details, see =579.
Chapters Introduction 2 Preparation and Basic Operations 39 Basic Zone 69 Creative Zone 103 Shooting 115 Flash Photography 283 Playback 301 Wireless Features 375 Set-up 481 Custom Functions / My Menu 525 Reference 549 12
Contents Introduction 2 Item Check List.......................................................................................3 Instruction Manuals.................................................................................4 Quick Start Guide....................................................................................6 About This Manual..................................................................................9 Compatible Cards............................................................
Contents Basic Zone 69 Scene Intelligent Auto/Hybrid Auto (Fully Automatic)............................70 Special Scene Mode (SCN)..................................................................78 Self Portrait Mode.................................................................................80 Portrait Mode........................................................................................81 Smooth Skin Mode................................................................................
Contents Shooting Still Photo Shooting 115 116 Tab Menus: Still Photo Shooting.........................................................117 Image Quality......................................................................................122 Still Image Aspect Ratio......................................................................125 Image Review Time............................................................................127 Lens Aberration Correction..............................................
Contents High ISO Speed Noise Reduction.......................................................172 Dust Delete Data Acquisition..............................................................174 HDR Mode..........................................................................................176 Focus Bracketing................................................................................180 Touch Shutter......................................................................................
Contents Movie Recording 227 Tab Menus: Movie Recording.............................................................228 Movie Mode........................................................................................232 HDR Movie Mode................................................................................239 Movie Recording Quality.....................................................................241 Sound Recording..............................................................................
Contents Movie Playback...................................................................................309 Editing a Movie’s First and Last Scenes.............................................313 Frame Extraction.................................................................................315 Digest Movie Editing...........................................................................317 Still Photo Extraction from RAW Burst Images...................................319 Playback on a TV Set..........
Contents Playback Grid......................................................................................371 View from Last Seen...........................................................................372 Magnification (Approx.).......................................................................373 Wireless Features 375 Tab Menus: Wireless Tab....................................................................376 Selection of Wi-Fi/Bluetooth Connection............................................
Contents Security...............................................................................................476 Checking Network Settings.................................................................477 Wireless Communication Status.........................................................478 Set-up 481 Tab Menus: Set-up..............................................................................482 Select Folder.....................................................................................
Contents Display Performance...........................................................................515 Viewfinder Display Format..................................................................515 Display Settings..................................................................................516 Reverse Display..................................................................................517 Help Features.....................................................................................
Contents Error Codes.........................................................................................575 Performance Data...............................................................................576 Information Display.............................................................................583 Index...................................................................................................
Index to Features Power Screen zz Charging the battery (=40) zz Tilting (=46) zz Battery level (=48) zz Touch control (=66) zz Eco mode (=494) zz Feature guide (=493) zz Power saving (=495) Cards zz Formatting (=490) zz Cards compatible with movie recording (=579) Lens zz Attaching (=49, =51) zz Detaching (=50, =53) zz Releasing shutter without lens (=541) Basic Settings zz Date/Time/Zone (=497) zz Language (=500) zz Beeper (=508) zz Clear all camera settings (=520) zz Copyright information (=521
Index to Features Image Recording Settings Shooting zz Creating/Selecting a folder (=484) zz Shooting mode (=36) zz File numbering (=486) zz Creative Assist (=76) Image Quality zz Image quality (=122) zz Still image aspect ratio (=125) zz Lens aberration correction (=128) zz ISO speed (still photos) (=143) zz Auto Lighting Optimizer (=149) zz Highlight tone priority (=150) zz White balance (=155) zz Color space (=162) zz Picture Style (=163) zz Noise reduction for long exposures (=171) zz Noise reduc
Index to Features Exposure zz Exposure compensation with M+ISO Auto (=111) Movie Recording zz Autoexposure recording (=232) zz Exposure compensation (=140) zz Manual exposure recording (=234) zz AEB (=141) zz HDR movie (=239) zz Exposure simulation (=154) zz Movie recording size (=241) zz AE lock (=217) zz Sound recording (=248) zz Safety shift (=531) zz Wind filter (=248) Flash zz Built-in flash (=284) zz Flash exposure compensation (=286) zz FE lock (=287) zz Built-in flash function settings
Index to Features Playback zz Image review time (=127) zz Single-image display (=304) zz Touch playback (=306) zz Magnified view (=307) zz Index display (=308) zz Movie playback (=309) zz Editing a movie’s first and last scenes (=313) zz Frame Grab (4K) (=315) zz Still photo extraction (RAW burst images) (=319) zz Viewing images on a television (=321) zz Protect (=323) zz Image rotation (=326) zz Erasing (=327) zz Rating (=358) zz Slide show (=361) zz Setting image search conditions (=363) zz Image browsin
Index to Features Sensor Cleaning and Dust Reduction zz Dust Delete Data Acquisition (=174) zz Sensor cleaning (=503) zz Manual sensor cleaning (=505) Software zz Downloading and Installing (=550) zz Software Instruction Manuals (=551) Wireless Features zz Connect to smartphones (=379) zz Auto send images to smartphones (=394) zz Remote control (EOS Utility) (=408) zz Auto send images to computers (=413) zz Print from Wi-Fi printers (=416) zz Upload to Web service (=426) zz Connect to Wireless Remote (=4
Safety Instructions Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent injury or harm to the operator of the product or others. WARNING: Denotes the risk of serious injury or death. zz Keep the product out of the reach of young children. A strap wrapped around a person’s neck may result in strangulation. The parts or provided items of cameras or accessories are dangerous if swallowed. If swallowed, seek immediate medical assistance.
Safety Instructions zz Observe the following instructions when using a battery charger or AC adapter. • Periodically remove any dust buildup from the power plug and power outlet using a dry cloth. • Do not plug in or unplug the product with wet hands. • Do not use the product if the power plug is not fully inserted into the power outlet. • Do not expose the power plug and terminals to dirt or let them come into contact with metallic pins or other metal objects.
Safety Instructions CAUTION: Denotes the risk of injury. zz Do not fire the flash near the eyes. It may hurt the eyes. zz Do not look at the screen or through the viewfinder for prolonged periods of time. This may induce symptoms similar to motion sickness. In such a case, stop using the product immediately and rest for a while before resuming use. zz Flash emits high temperatures when fired. Keep fingers, any other part of your body, and objects away from the flash unit while taking pictures.
Handling Precautions Camera Care zz This camera is a precision instrument. Do not drop it or subject it to physical shock. zz The camera is not waterproof and cannot be used underwater. If the camera gets wet, contact a Canon Service Center immediately. Wipe off any water droplets with a clean, dry cloth, and if the camera is exposed to salty air, wipe it off with a clean, well-wrung wet cloth. zz Using the camera in a location with large amounts of dirt or dust may cause a malfunction.
Handling Precautions zz If condensation forms on the camera, to avoid damage, do not use the camera or remove the lens, card, or battery. Turn the camera off and wait until the moisture has fully evaporated before resuming use. Even after the camera is completely dry, if it is still internally cold, do not remove the lens, card, or battery until the camera has adjusted to the ambient temperature.
Handling Precautions Cards To protect the card and its recorded data, note the following: zz Do not drop, bend, or wet the card. Do not subject it to excessive force, physical shock, or vibration. zz Do not touch the card’s electronic contacts with your fingers or anything metallic. zz Do not affix any stickers, etc. on the card. zz Do not store or use the card near anything that has a strong magnetic field, such as a television, speakers, or magnets. Also avoid places prone to having static electricity.
Part Names (8) (9) (10) ( 1) ( 2) ( 3) ( 4) ( 5) ( 6) ( 7) ( 11) (19) ( 12) ( 13) ( 14) (20) ( 15) ( 16) ( 17) ( 18) ( 21) ( 22) ( 23) ( 24) (1) (2) (3) (4) (5) (6) (7) <5> Quick control dial Multi-function button Shutter button <6> Main dial EF-M lens mount index Grip Contacts (8) (9) (10) (11) (12) (13) < > Dial function button Mode dial Image sensor Built-in flash Strap mount Flash up lever 34 (14) AF-assist beam/Red-eye reduction/Self-timer/Remote control lamp (15) Terminal cover
Part Names (11) (3) (4) (1) (3) (12) (5) (6) (2) (13) (10) (14) (15) (16) (9) (17) (18) (19) (20) (21) (22) (23) (24) (25) (8) (7) (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) Focal plane mark Hot shoe Microphone Flash sync contacts Power switch Speaker AF point button AE lock/FE lock button Serial number (body number) Screen Digital terminal HDMI OUT terminal (13) Info button (14) Up/Exposure compensation button (15) Left/Drive mode button (16)
Part Names Mode Dial The Mode dial includes Basic Zone modes, Creative Zone modes, and movie recording mode. ( 1) (1) Basic Zone All you do is press the shutter button. The camera sets everything to suit the subject or scene for shooting.
Part Names ( 2) ( 3) ( 4) (2) Creative Zone These modes give you more control for shooting various subjects as desired. t d s Flexible-priority AE (=112) Program AE (=104) Shutter-priority AE (=106) f Aperture-priority AE (=108) a Manual exposure (=110) (3) Custom shooting modes You can assign , , , , , AF operation, menu functions, and more to or (=519).
Part Names Battery Charger LC-E17E Charger for Battery Pack LP-E17 (=40). (4) (1) (2) (3) (1) (2) (3) (4) (5) Battery pack slot Full-charge lamp Charge lamp Power cord Power cord socket (5) Attaching the Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle.
Preparation and Basic Operations This chapter describes preparatory steps before you start shooting and the basic camera operations.
Charging the Battery the protective cover 1Detach provided with the battery. insert the battery in the 2Fully charger. zz Do the opposite to remove the battery. the battery. 3zRecharge z Connect the power cord to the charger (1) (2) 40 and insert the plug into a power outlet. zz Recharging starts automatically and the charge lamp (1) lights up in orange. zz When the battery is fully recharged, the full-charge lamp (2) will light up in green. zz It takes approx. 2 hr.
Charging the Battery zz Upon purchase, the battery is not fully charged. Charge the battery before use. zz Recharge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually drain and lose its capacity. zz After charging the battery, remove it and disconnect the charger from the power outlet. zz When not using the camera, remove the battery.
Inserting/Removing the Battery and Card Insert a fully charged Battery Pack LP-E17 into the camera. zz Make sure the card’s write-protect switch (1) is set upward to enable writing and erasing. Insertion the card slot/battery 1Slide compartment cover and open the cover. the battery. 2zInsert z Insert the end with the electrical contacts. zz Insert the battery until it locks in place. (1) the card.
Inserting/Removing the Battery and Card the cover. 4zClose z Press the cover until it snaps shut. zz You cannot use batteries other than the Battery Pack LP-E17. zz After opening the card slot/battery compartment cover, be careful not to swing it back any further. Otherwise, the hinge may break. Removal (1) the card slot/battery 1Open compartment cover. zz Set the power switch to <2>. zz Check that the access lamp (1) is off, then open the cover. zz If [Saving...
Inserting/Removing the Battery and Card the card. 3zRemove z Gently push in the card, then let it go to eject. zz Pull the card straight out. the cover. 4zClose z Press the cover until it snaps shut.
Inserting/Removing the Battery and Card Formatting the Card If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera (=490). zz The number of possible shots varies depending on the remaining capacity of the card, the settings of image quality, ISO speed, etc. zz When the access lamp is lit or blinking, it indicates that images are being written to, read from, or erased from the card, or data is being transferred.
Using the Screen You can change the direction and angle of the screen. Tilting the Screen Downward zz Pull the top of the screen downward toward you. zz The screen opens to about 45°. Tilting the Screen Upward zz The screen lifts upward and opens to about 180°. zz When including yourself in shots, you can view a mirror image of yourself by rotating the screen around toward the front of the camera. zz When the camera is not in use, keep the screen closed.
Turning on the Power zz <1> The camera turns on. zz <2> The camera is turned off and does not function. Set the power switch to this position when not using the camera. Setting the Date, Time, and Time Zone If you turn on the power switch and the date/time/zone setting screen appears, see =497 to set the date/time/zone. Changing the Interface Language To change the interface language, see =500.
Turning on the Power Battery Level Indicator : Battery level is sufficient. :B attery level is low, but the camera can still be used. :B attery will be exhausted soon. (Blinks) : Charge the battery. zz Doing any of the following will exhaust the battery faster: yyPressing the shutter button halfway for a prolonged period. yyActivating the AF frequently without taking a picture. yyUsing the lens’s Image Stabilizer. yyUsing the Wi-Fi function or Bluetooth function.
Attaching and Detaching a Lens The camera is compatible with EF-M lenses. By attaching an optional Mount Adapter EF-EOS M, you can also use EF and EF-S lenses. Attaching a Lens the caps. 1zRemove z Remove the rear lens cap and the body cap by turning them as shown by the arrows. the lens. 2zAttach z Align the white mount index on the lens with the white mount index on the camera and turn the lens as shown by the arrow until it clicks in place. 3Remove the front lens cap. to shoot.
Attaching and Detaching a Lens Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrow. zz Turn the lens until it stops, then detach it. zz Attach the rear lens cap to the detached lens. zz Do not look at the sun directly through any lens. Doing so may cause loss of vision. zz When attaching or detaching a lens, set the camera’s power switch to <2>. zz If the front part (focusing ring) of the lens rotates during autofocusing, do not touch the rotating part.
Attaching and Detaching EF/EF-S Lenses EF and EF-S lenses can be used by attaching the optional Mount Adapter EF-EOS M. Attaching a Lens the caps. 1zRemove z Remove the caps on the lens, adapter, and body. (1) (2) the lens to the adapter. 2zAttach z Align the red or white mount index on the lens with the corresponding mount index on the adapter and turn the lens as shown by the arrow until it clicks into place. (1) (2) (3) Red index White index the adapter to the camera.
Attaching and Detaching EF/EF-S Lenses the lens’s focus mode switch 4Set to . zz stands for autofocus. zz stands for manual focus. Autofocus will not operate. 5Remove the front lens cap.
Attaching and Detaching EF/EF-S Lenses Detaching the Lens pressing the lens release 1While button, turn the adapter as shown by the arrow. zz Turn the adapter until it stops, then detach it. the lens from the adapter. 2zDetach z Hold down the lens release lever on the adapter and turn the lens counterclockwise. zz Turn the lens until it stops, then detach it. zz Attach the lens cap to the lens after removal. zz For lens precautions, see =50.
Using an Electronic Viewfinder (Sold Separately) Shooting is easier with an optional electronic viewfinder, which helps you concentrate on keeping subjects in focus. Note that fewer shots and less recording time are available than when using the screen (LCD monitor) on the back of the camera. 1Make sure the camera is off. the electronic viewfinder to 2Attach the hot shoe. Remove the hot shoe cap. Remove the viewfinder cover.
Using an Electronic Viewfinder (Sold Separately) the camera on and switch 4Turn between using the screen and viewfinder as needed. Moving the viewfinder near your eye will activate its display and deactivate the camera screen. Moving the viewfinder away from your eye will deactivate its display and activate the camera screen. the diopter. 5Adjust Turn the dial to bring viewfinder images into sharp focus. EVF-DC1 EVF-DC2 finished, remove the 6When electronic viewfinder.
Using an Electronic Viewfinder (Sold Separately) zz The viewfinder display and camera screen cannot be activated at the same time. zz Touch operations on the camera screen are not possible while the viewfinder display is in use. zz Although the viewfinder is produced under extremely high-precision manufacturing conditions and more than 99.99% of the pixels meet design specifications, in rare cases some pixels may be defective or may appear as red or black dots.
Basic Operations Holding the Camera As you shoot, you can tilt the screen to adjust it. For details, see =46.
Basic Operations Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing Halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture value) is displayed for approx. 8 sec. or as set for the metering timer.* * By default, the metering timer is set to 8 sec. Pressing Completely This action shoots.
Basic Operations zz If you press the shutter button completely without pressing it halfway first, or if you press the shutter button halfway and then press it completely immediately, the camera will take a moment before it takes the picture. zz Even during menu display or image playback, you can go back to shootingready state by pressing the shutter button halfway. <6> Main Dial While looking at the screen, turn the <6> dial. Use this dial to set the shutter speed, aperture value, etc.
Basic Operations Multi-Function Button By pressing the button and turning the <5> dial, you can set the ISO speed. <5> Control Dial Turning the control dial is one way to choose setting items, switch images, and perform other operations. Additionally, you can perform most of the operations that are possible with the keys. Frequently used functions can also be assigned (=540).
Basic Operations INFO Button Each press of the button changes the information shown. The following sample screens are for still photos.
Menu Operations and Settings (6) (1) (2) (4) (7) (5) (3) (1) (2) (3) button Screen Cross keys/Control dial (4) (5) (6) (7) button <0> button Main dial Quick control dial Basic Zone Modes Menu Screen * In Basic Zone modes, some tabs and menu items do not appear.
Menu Operations and Settings Creative Zone Modes Menu Screen (4) (5) (6) (7) (8) (9) (1) (2) (10) (3) (1) (2) (3) (4) (5) Main tabs Secondary tabs Menu items z: Shooting 3: Playback (6) (7) (8) (9) (10) k: Wireless features 5: Set-up 8: Custom Functions 9: My Menu Menu settings Menu Setting Procedure the menu screen. 1zDisplay z Press the button. a tab. 2zSelect z Press the button to switch between main tabs. zz Turn the <6> dial to select a secondary tab.
Menu Operations and Settings an item. 3zSelect z Turn the <5> dial to select an item, then press <0>. an option. 4zSelect z Turn the <5> dial to select an option. zz The current setting is indicated in blue. an option. 5zSetz Press <0> to set it. the setting. 6zExit z Press the button to finish and prepare for shooting. zz The description of menu functions hereafter assumes that you have pressed the button to display the menu screen.
Menu Operations and Settings Dimmed Menu Items Example: Highlight tone priority Dimmed menu items cannot be set. The menu item is dimmed if another function setting is overriding it. You can see the overriding function by selecting the dimmed menu item and pressing <0>. If you cancel the overriding function’s setting, the dimmed menu item will become settable. zz You may not be able to see the overriding function for certain dimmed menu items.
Touch-Screen Operation You can operate the camera by tapping or dragging on the screen (touch‑screen panel) with your finger. Tap Sample screen (Quick Control) zz Use your finger to tap on (touch briefly and then remove your finger from) the screen. zz For example, when you tap on [Q], the Quick Control screen appears. By tapping on [2], you can return to the preceding screen. Drag Sample screen (Menu screen) zz Slide your finger while touching the screen.
Quick Control You can directly select and set the settings displayed on the screen. This is called Quick Control (except in mode). 1Press the button (7). a setting item. 2zSelect z Press the keys for selection. zz When the screen at left is displayed, press the keys for selection. an option. 3zSelect z Turn the <6> or <5> dial, or press the keys to change the setting. Some items are set by pressing a button after this.
Basic Zone This chapter describes how to use the Basic Zone modes on the Mode dial for best results. With Basic Zone modes, all you do is point and shoot, and the camera sets everything automatically.
Scene Intelligent Auto/Hybrid Auto (Fully Automatic) is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. It can adjust focus automatically on either the still or moving subject by detecting the motion of the subject. With , you can make a short movie of the day just by shooting still photos. The camera records 2–4-second clips of scenes before each shot, which are later combined in a digest movie (=222, =317). 1Set the Mode dial to or .
Scene Intelligent Auto/Hybrid Auto (Fully Automatic) on the subject. 4zFocus z Press the shutter button halfway to focus. zz If [D] blinks, use the lever to raise the built-in flash. zz You can also focus by tapping a person’s face or another subject on the screen (Touch AF) when [z: Continuous AF] is set to [Disable]. zz Under low light, the AF-assist beam (=215) is automatically activated if needed.
Scene Intelligent Auto/Hybrid Auto (Fully Automatic) zz AF operation (One-Shot AF or Servo AF) is set automatically when you press the shutter button halfway. Even when automatically set to One-Shot AF, the camera will switch to Servo AF if subject motion is detected while you are pressing the shutter button halfway ( only). zz The mode makes the colors look more impressive in nature, outdoor, and sunset scenes.
Scene Intelligent Auto/Hybrid Auto (Fully Automatic) Minimizing Blurred Photos zz Use a sturdy tripod that can bear the weight of the shooting equipment. Mount the camera securely on the tripod. zz Using a remote switch (sold separately, =223) or a wireless remote control (sold separately, =223) is recommended. FAQ zz Focusing is not possible (indicated by an orange AF point). Aim the camera at an area with good contrast, then press the shutter button halfway (=58).
Scene Intelligent Auto/Hybrid Auto (Fully Automatic) Recomposing the Shot Depending on the scene, positioning the subject toward the left or right to include a balanced background will result in a picture with better perspective. Pressing the shutter button halfway to focus on a still subject will lock the focus on that subject. Recompose the shot while keeping the shutter button pressed halfway, and then press the shutter button completely to take the picture. This is called “focus lock”.
Scene Intelligent Auto/Hybrid Auto (Fully Automatic) Scene Icons The camera detects the scene type and sets everything automatically to suit the scene. The detected scene type is indicated on the upper left of the screen. For icon details, see =587. Adjusting Settings by Touching the Screen By tapping icons, you can adjust settings.
Scene Intelligent Auto/Hybrid Auto (Fully Automatic) Shooting with Effects Applied (Creative Assist) the button. 1zPress z Read the message and select [OK]. an effect. 2zSelect z Use the keys to select an effect, then press <0>. the effect level and other 3Select details. zz Use the keys to set it, then press <0>. zz To reset the setting, press the button, then select [OK]. Creative Assist Effects zz [ ] Preset zz [ ] Background blur Select one of the preset effects.
Scene Intelligent Auto/Hybrid Auto (Fully Automatic) zz [ ] Brightness zz [ ] Contrast zz [ ] Saturation Adjust image brightness. Adjust contrast. Adjust the vividness of colors. zz [ ] Color tone 1 zz [ ] Color tone 2 zz [ ] Monochrome Adjust amber/blue color tone. Adjust green/magenta color tone. Set the toning effect for monochrome shooting. Set to [Off] to shoot in color. [Saturation], [Color tone 1], and [Color tone 2] are not available with options other than [Off].
Special Scene Mode (SCN) The camera will automatically choose the appropriate settings when you select a shooting mode for your subject or scene. * <8> stands for Special Scene. 1Set the Mode dial to <8>. 2Press <0>. a shooting mode. 3zSelect z Press the keys to select the shooting mode, then press <0>. zz Cautions on each shooting mode are listed together (=92). Read the cautions before shooting. zz The Quick Control screen appears after step 2 when [5: Mode guide] is set to [Disable].
Special Scene Mode (SCN) Available Shooting Modes in the 8 Mode J Shooting mode Page Self Portrait =80 4 Shooting mode Page Close-up =87 2 Portrait =81 P Food =88 K Smooth skin =82 6 Night Portrait =89 3 Landscape =83 F Handheld Night Scene =90 5 Sports =84 G HDR Backlight Control =91 r Panning =85 zz You can also set the shooting mode from [z: Shooting mode] after setting the Mode dial to <8>.
Self Portrait Mode To take shots of yourself, use [J] (Self Portrait) mode. Rotate the screen around toward the lens. Customizable image processing includes skin smoothing as well as brightness and background adjustment to make yourself stand out. Shooting Tips zz Set the brightness and smooth skin effect. [Brightness] and [Smooth skin effect] can be set in a range of five levels. In [Background], you can adjust the level of background blurring. zz Tap on the screen to shoot.
Portrait Mode The [2] (Portrait) mode blurs the background to make the human subject stand out. It also makes skin tones and hair look softer. Shooting Tips zz Select the location where the distance between the subject and the background is the farthest. The further the distance between the subject and background, the more blurred the background will look. The subject will also stand out better against an uncluttered dark background. zz Use a telephoto lens.
Smooth Skin Mode Use [K] (Smooth skin) mode to make skin look more attractive. Image processing makes skin look smoother. Shooting Tips zz Adjust the face size. Frames are displayed around any main subjects detected for skin smoothing. For more effective skin smoothing, you can adjust the size so that the frame is displayed on the subject’s face. zz Focus on the face. As you focus, make sure the AF point on the face is lit in green before you shoot.
Landscape Mode Use the [3] (Landscape) mode for expansive scenery or to have everything in focus from near to far. For vivid blues and greens, and very sharp and crisp images. Shooting Tips zz With a zoom lens, use the wide-angle end. When using a zoom lens, set the lens to the wide-angle end to make the objects near and far in focus. It also adds breadth to landscapes. zz Keep the camera steady when shooting night scenes. Shooting with [3] while handholding the camera may cause camera shake.
Sports Mode Use the [5] (Sports) mode to shoot a moving subject, such as a running person or a moving vehicle. (1) Shooting Tips zz Use a telephoto lens. Use of a telephoto lens is recommended to enable shooting from a distance. zz Track the subject with the Area AF frame. By default, [z: AF method] is set to [u+Tracking]. An Area AF frame (1) appears when you press the shutter button halfway. Once the subject is in focus, the AF point turns blue. zz Shoot continuously.
Panning Mode If you want to take a picture with the feel of speed and a blurred motion effect on the subject’s background, use [r] (Panning). If you use a lens supporting the [r] mode, subject blur is detected, corrected, and reduced. Shooting Tips zz Turn the camera to follow the moving subject. When shooting, turn the camera smoothly as you track the moving subject.
Panning Mode zz Set the level of background motion blur. With [Effect], you can set the level of background motion blur. The [Max] setting will set a slower shutter speed to increase the background motion blur around the subject. If the subject blur is noticeable, set [Effect] to [Med] or [Min] to reduce the blur. zz Shoot continuously. By default, [i] (Continuous shooting) is set. At the decisive moment, press the shutter button completely to take the picture.
Close-up Mode When you want to shoot flowers or small things up close, use the [4] (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips zz Use a simple background. A simple background makes small objects such as flowers stand out better. zz Move in as close as possible to the subject. Check the lens for its minimum focusing distance.
Food Mode When you want to take pictures of food, use [P] (Food). The photo will look bright and appetizing. Also, depending on the light source, the reddish tinge will be suppressed in the pictures taken under tungsten lights, etc. Shooting Tips zz Change the color tone. You can change [Color tone]. To increase the food’s reddish tinge, set it toward [Warm]. Set it toward [Cool] if it looks too red.
Night Portrait Mode When you want to photograph people at night and obtain a natural-looking night scene in the background, use the [6] (Night Portrait) mode. Note that shooting in this mode requires the built-in flash or an external Speedlite. Using a tripod is recommended. Shooting Tips zz Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Also, since camera shake is prone to occur with handheld shooting, use a tripod.
Handheld Night Scene Mode The [F] (Handheld Night Scene) mode enables you to shoot night scenes even while handholding the camera. In this shooting mode, four shots are taken consecutively for each picture, and the resulting one image with reduced camera shake is recorded. Shooting Tips zz Hold the camera firmly. During shooting, hold the camera firmly and steadily. In this mode, four shots are aligned and merged into a single image.
HDR Backlight Control Mode When shooting a scene having both the bright and dark areas, use the [G] (HDR Backlight Control) mode. When you take one picture in this mode, three consecutive shots are taken at different exposures. This results in one image, with a wide tonal range, that has minimized the clipped shadows caused by backlighting. * HDR stands for High Dynamic Range. Shooting Tips zz Hold the camera firmly. During shooting, hold the camera firmly and steadily.
Cautions for the Modes J: Self Portrait zz Areas other than people’s skin may be modified, depending on the shooting conditions. zz [Smooth skin effect] settings specified in [J] mode are not applied in [K] mode. zz [Background] is set to [Auto] and cannot be changed in [I] flash mode when you have raised the flash. K: Smooth skin zz Areas other than people’s skin may be modified, depending on the shooting conditions. zz Setting details in [K] mode are not applied in [J] mode.
Cautions for the Modes r: Panning (continued) zz With a lens supporting the [r] mode, subject blur may not be corrected properly when shooting the following subjects or under the following shooting conditions. yySubjects with very low contrast. yySubjects in low light. yyStrongly backlit or reflective subjects. yySubjects with repetitive patterns. yySubjects with less patterns or monotonous patterns. yySubjects with reflections (images reflected in glass, etc.).
Cautions for the Modes 6: Night Portrait zz Tell subjects to remain still for a moment after the flash fires. zz Focusing may be difficult when subject faces look dark. In this case, set the focus mode to MF and focus manually (=7, =52). zz Autofocusing at night or in dark scenes may be difficult when points of light lie within the AF point. In this case, set the focus mode to MF and focus manually (=7, =52). zz Shots will look slightly different from the image as displayed on the screen.
Cautions for the Modes F: Handheld Night Scene (continued) zz If you shoot a moving subject, the subject’s movement may leave afterimages or the surrounding area of the subject may become dark. zz The image alignment may not function properly with repetitive patterns (lattice, stripes, etc.), flat or single-tone images, or images significantly misaligned due to camera shake. zz It takes some time to record images to the card since they are merged after shooting.
Creative Filters Mode You can shoot with filter effects applied. You can preview filter effects before shooting. 1Set the Mode dial to . 2Press <0>. a filter effect. 3zSelect z Use the keys to select a filter effect (=98–=99), then press <0>. zz The image is shown with the filter effect applied. the effect and shoot. 4zAdjust z Press the button and select an icon below [Creative filters] (except c, A, B, C, or D). zz Use the keys to adjust the effect, then press <0>.
Creative Filters Mode zz RAW and RAW+JPEG are not available. When RAW image quality is set, images are captured with 73 image quality. When RAW+JPEG image quality is set, images are captured with the specified JPEG image quality. zz Continuous shooting is not available when [I], [G], [X], [K], [H], or [c] is set. zz Dust Delete Data (=174) is not added to [X] shots. zz With [I], the grainy preview will differ somewhat from the appearance of your shots.
Creative Filters Mode Creative Filter Characteristics zz I Grainy B/W Makes the image grainy and black and white. By adjusting the contrast, you can change the black-and-white effect. zz G Soft focus Gives the image a soft look. By adjusting the blur, you can change the degree of softness. zz X Fish-eye effect Gives the effect of a fish-eye lens. The image will have barrel distortion. Depending on the level of this filter effect, the area trimmed along the periphery of the image changes.
Creative Filters Mode zz c Miniature effect Creates a diorama effect. Shooting under the default setting will keep the center looking sharp. You can move the area that looks sharp (the scene frame) as described in “Miniature Effect Operations” (=101). 1-point AF is used as the AF method. Shooting with the AF point and scene frame aligned is recommended. zz A HDR art standard Photos retain more detail in highlights and shadows. With reduced contrast and flatter gradation, the finish resembles a painting.
Creative Filters Mode [A], [B], [C], and [D] Notes zz Compared to other shooting modes, the image area will be smaller. zz Filter effect previews will not look exactly the same as your shots. zz If you shoot a moving subject, the subject’s movement may leave afterimages or the surrounding area of the subject may become dark. zz The image alignment may not function properly with repetitive patterns (lattice, stripes, etc.), flat or single-tone images, or images significantly misaligned due to camera shake.
Creative Filters Mode Miniature Effect Operations the AF point. 1zMove z Press the button twice to enable movement of the AF point, which turns orange. zz Use the cross keys to move the AF point to the position to focus on. the scene frame. 2zMove z Move the scene frame if the AF point is outside of it, so that the AF point is aligned with it. zz To make the scene frame movable (displayed in orange), press the button or tap [r] in the lower right of the screen.
Creative Zone Creative Zone modes give you the freedom to shoot in a variety of ways by setting your preferred shutter speed, aperture value, exposure, and more. zz To clear the shooting mode description displayed when you turn the Mode dial, press <0> (=492).
Program AE Mode (P) The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. * stands for Program. * AE stands for Auto Exposure. 1Set the Mode dial to . on the subject. 2zFocus z Aim the AF point over the subject and press the shutter button halfway. the display and shoot. 3zCheck z As long as the exposure value is not blinking, standard exposure will be obtained. zz If the “30"” shutter speed and the lowest f/number blink, it indicates underexposure.
Program AE Mode (P) Differences Between and Modes zz In mode, many functions, such as the AF method and metering mode, are set automatically to prevent spoiled shots. The functions you can set are limited. On the other hand, with mode, only the shutter speed and aperture are set automatically. You can freely set the AF method, metering mode, and other functions.
Shutter-priority AE Mode (Tv) In this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the standard exposure matching the brightness of the subject. A faster shutter speed can freeze the action of a moving subject. A slower shutter speed can create a blurred effect, giving the impression of motion. * stands for Time value. Blurred motion (Slow speed: 1/30 sec.) Frozen motion (Fast speed: 1/2000 sec.) 1Set the Mode dial to . the desired shutter speed.
Shutter-priority AE Mode (Tv) zz If the lowest f/number blinks, it indicates underexposure. Turn the <6> dial to set a slower shutter speed until the aperture stops blinking or set a higher ISO speed. zz If the highest f/number blinks, it indicates overexposure. Turn the <6> dial to set a faster shutter speed until the aperture stops blinking or set a lower ISO speed. Shutter Speed Display zz For example, “0"5” indicates 0.5 sec. and “15"”, 15 sec.
Aperture-priority AE Mode (Av) In this mode, you set the desired aperture and the camera sets the shutter speed automatically to obtain the standard exposure matching the subject brightness. A higher f/number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus. On the other hand, a lower f/number (larger aperture hole) will make less of the foreground and background fall within acceptable focus. * stands for Aperture value (aperture opening).
Aperture-priority AE Mode (Av) zz If the “30"” shutter speed blinks, it indicates underexposure. Turn the <6> dial to set a larger aperture (lower f/number) until the shutter speed blinking stops or set a higher ISO speed. zz If the “1/4000” shutter speed blinks, it indicates overexposure. Turn the <6> dial to set a smaller aperture (higher f/number) until the shutter speed blinking stops or set a lower ISO speed.
Manual Exposure Mode (M) In this mode, you set both the shutter speed and aperture as desired. To determine the exposure, refer to the exposure level indicator or use a commercially available exposure meter. * stands for Manual. 1Set the Mode dial to . the ISO speed (=143). 2zSetz With ISO Auto, you can set exposure compensation (=111). speed and aperture. 3zSetz Totheset shutter the shutter speed, turn the <6> dial. To set the aperture, turn the <5> dial. on the subject.
Manual Exposure Mode (M) Exposure Compensation with ISO Auto If the ISO speed is set to [AUTO] for manual exposure shooting, you can set exposure compensation (=140) as follows: zz Touch the exposure level indicator zz [z: Expo.comp./AEB] zz Quick Control screen zz If ISO Auto is set, the ISO speed setting will change to obtain the standard exposure with the set shutter speed and aperture. Therefore, you may not obtain the desired exposure effect. In this case, set the exposure compensation.
Flexible-priority AE (Fv) In this mode, you can set shutter speed, aperture, and ISO speed manually or automatically and combine these settings with your choice of exposure compensation. Shooting in mode, with control over each of these parameters, is equivalent to shooting in , , , or mode. * stands for Flexible value. 1Set the Mode dial to . the shutter speed, aperture, 2Set and ISO speed. zz Turn the <5> dial to select an item to set.
Flexible-priority AE (Fv) Combinations of Functions in Mode Shutter Speed Aperture Value [AUTO] [AUTO] Manual selection [AUTO] [AUTO] Manual selection Manual selection Manual selection Exposure Compensation Shooting Mode Available Similar to Available Similar to Manual selection Available Similar to [AUTO] Available Manual selection ― ISO Speed [AUTO] Manual selection [AUTO] Manual selection [AUTO] Similar to zz Blinking values indicate that the values set will ca
Shooting This chapter describes shooting and introduces menu settings on the shooting ([z]) tab.
Still Photo Shooting zz A M icon to the right of a page title indicates that the function is available only in Creative Zone , , , , or mode.
Tab Menus: Still Photo Shooting zz Shooting 1 =122 =125 =127 =128 =289 =133 =137 zz Shooting 2 =140, 141 =143 =277 =149 =150 zz Shooting 3 =151 =153 =154 117
Tab Menus: Still Photo Shooting zz Shooting 4 =155 =158 =160 =162 =163, 166, 169 zz Shooting 5 =171 =172 =174 =176 =180 zz Shooting 6 =184 =186 =187 =190 =193 118
Tab Menus: Still Photo Shooting zz Shooting 7 =195 =198 =209 =211 =212 =214 =215 zz Shooting 8 =220 =216 =270 =221 zz Shooting 9 =241 =248 =271 =279 zz [Touch & drag AF settings] is displayed when an optional electronic viewfinder is attached.
Tab Menus: Still Photo Shooting In Basic Zone modes, the following screens are displayed. zz Shooting 1 =78, 96 =122 =125 =127 =289 =133 zz Shooting 2 =76 =184 =187 =222 zz [Shooting mode] or [AF method] is available in <8> or mode. zz [Retain Creative Assist data] is available in mode. zz [Digest type] is available in mode.
Tab Menus: Still Photo Shooting zz Shooting 3 =198 =209 =211 =212 =215 zz Shooting 4 =220 =216 =270 =221 zz Shooting 5 =241 =248 =271 zz [Touch & drag AF settings] is displayed when an optional electronic viewfinder is attached. zz [MF peaking settings] is available in <8> or mode.
Image Quality You can select the pixel count and the image quality. 1Select [z: Image quality]. quality. 2zSetz Totheselectimage the RAW quality, turn the <6> dial, and to select the JPEG quality, press the keys. zz Press <0> to set it. zz Number of shots available as indicated by [****] on the image quality setting screen always applies to a setting of [3:2], regardless of the actual aspect ratio setting (=125). zz If [–] is set for both the RAW image and JPEG image, 73 will be set.
Image Quality RAW Images RAW images are raw data from the image sensor that are recorded to the card digitally as 1 or F (smaller than 1) files, depending on your selection. RAW images can be processed using [3: RAW image processing] (=341) to save them as JPEGs. As the RAW image itself does not change, you can process the RAW image to create any number of JPEG images with various processing conditions. You can use Digital Photo Professional (EOS software) to process RAW images.
Image Quality Maximum Burst for Continuous Shooting The estimated maximum burst is shown on the top of the shooting screen. zz If the maximum burst is displayed as “99”, it indicates that you can shoot 99 or more shots continuously. The value starts decreasing once it reaches 98 or less. [BUSY] display indicates that internal memory is full and shooting will stop temporarily. If you stop continuous shooting, the maximum burst will increase.
Still Image Aspect Ratio You can change the image’s aspect ratio. 1Select [z: Still img aspect ratio]. the aspect ratio. 2zSetz Select an aspect ratio, then press <0>. zz JPEG images The images will be recorded with the set aspect ratio. zz RAW images The images will always be recorded in the [3:2] aspect ratio. The selected aspect ratio information is added to the RAW image file.
Still Image Aspect Ratio Aspect Ratio 4:3 16:9 1:1 zz When you play back RAW images shot in the [4:3], [16:9], or [1:1] aspect ratio, they will be displayed with lines indicating the respective aspect ratio. (These lines are not recorded in the image.
Image Review Time Set to [Hold] to keep shots displayed immediately after you shoot, or set to [Off] if you prefer not to have shots displayed. 1Select [z: Image review]. 2Set a time option. zz When [Hold] is set, images are displayed as long as the time set in [5: Power saving].
Lens Aberration Correction M Vignetting, image distortion, and other issues may be caused by lens optical characteristics. The camera can compensate for these phenomena by using [Lens aberration correction]. [z: Lens aberration 1Select correction]. 2Select an item. [Enable]. 3zSelect z Confirm that the name of the attached lens and (except for diffraction correction) [Correction data available] are displayed.
Lens Aberration Correction Peripheral Illumination Correction Vignetting (dark image corners) can be corrected. zz Depending on shooting conditions, noise may appear on the image periphery. zz The higher the ISO speed, the lower the correction amount will be. zz The correction amount applied will be lower than the maximum correction amount that applied with Digital Photo Professional (EOS software).
Lens Aberration Correction Digital Lens Optimizer Various aberrations from lens optical characteristics can be corrected, along with diffraction and low-pass filter-induced loss of clarity. If [Correction data not available] or [ ] is displayed by [Digital Lens Optimizer], you can use EOS Utility to add the lens correction data to the camera. For details, refer to the EOS Utility Instruction Manual. zz Depending on shooting conditions, noise may be intensified together with the effects of correction.
Lens Aberration Correction Chromatic Aberration Correction Chromatic aberration (color fringing around subjects) can be corrected. zz [Chromatic aberr corr] is not displayed when [Digital Lens Optimizer] is enabled. Diffraction Correction Diffraction (loss of sharpness caused by the aperture) can be corrected. zz Depending on shooting conditions, noise may be intensified together with the effects of correction. zz The higher the ISO speed, the lower the correction amount will be.
Lens Aberration Correction General Cautions for Lens Aberration Correction zz Peripheral illumination correction, chromatic aberration correction, distortion correction, and diffraction correction cannot be applied to JPEG images already taken. zz When using a non-Canon lens, setting the corrections to [Disable] is recommended even if [Correction data available] is displayed. zz Magnifying the periphery of the image may display parts of the image that will not be recorded.
Drive Mode Single and continuous drive modes are provided. You can select the drive mode suiting the scene or subject. 1Select [z: Drive mode]. 2Set the drive mode. zz [u] Single shooting When you press the shutter button completely, only one shot will be taken. zz [E] High speed continuous shooting +/[o] High speed continuous shooting Captures a series of shots in rapid succession while you hold down the shutter button completely. [E] takes up to approx. 14 shots per second, and [o], up to approx.
Drive Mode zz [m/Q] Self-timer: 10 sec./remote control zz [l/k] Self-timer: 2 sec./remote control zz [q] Self-timer: Continuous shooting zz Conditions for maximum high-speed continuous shooting speed (=133) for [E] or [o] are as follows: shooting with a fully charged battery at a 1/1000 sec. or faster shutter speed and maximum aperture (which varies depending on the lens), at room temperature (23°C / 73°F), with flicker reduction disabled.
Self-Timer Use the self-timer when you want to be in the picture such as a commemorative photograph. 1Select [z: Drive mode]. self-timer. 2zSetz mthe(Q): Shoot in 10 sec. l (k): Shoot in 2 sec. q: Shoot continuously in 10 sec. for the specified number of shots* * To set the number of continuous shots (2–10), turn the <6> dial. zz Q and k icons are displayed when the camera is paired with a wireless remote control (sold separately, =223). the picture.
Self-Timer zz With [q], the shooting interval may be longer depending on image quality, use of external flash, and other shooting conditions. zz [l] enables you to shoot without touching the camera mounted on a tripod. This prevents camera shake if you shoot still-life or long exposures. zz After taking self-timer shots, playing back the image (=304) to check focus and exposure is recommended.
RAW Burst Mode M Enables fast continuous shooting of RAW images. Useful for choosing the best shot, taken at exactly the right moment, from your captured images. Images captured are saved in a single file (roll). You can extract any image from the roll to save it separately (=319). 1Select [z: RAW burst mode]. 2Select [RAW burst mode]. [Enable]. 3zSelect z After you select [Enable], [ displayed when you shoot. ] is 4Select [Pre-shooting].
RAW Burst Mode an option. 5zSetz [Enable]: Shooting begins slightly before (up to approx. 0.5 sec. before) you press the shutter button all the way down, after you initially hold it down halfway momentarily. [ ] is displayed when you shoot. zz [Disable]: Shooting begins when you press the shutter button completely. [ ] is displayed when you shoot. the picture. 6zTake z An on-screen indicator shows buffer status.
RAW Burst Mode zz Use cards with 4 GB or more of free space. zz Images may not be captured correctly if the battery runs out during image processing while you are shooting in RAW burst mode with a slow-writing card and low battery. zz Display pauses when you press the shutter button halfway. zz Camera shake or subject motion may cause image distortion. zz ISO Auto is used when shooting in , , and modes. zz Shutter speeds slower than 1/30 sec. are not available in , , or mode. zz Approx.
Exposure Compensation M Exposure compensation can brighten (increased exposure) or darken (decreased exposure) the standard exposure set by the camera. Exposure compensation can be set in the , , , , and shooting modes. You can set exposure compensation up to ±3 stops in 1/3-stop increments. For details on exposure compensation when mode and ISO Auto are both set, see =111, and see =112 for mode. the compensation amount.
Auto Exposure Bracketing M You can capture three images at different shutter speeds, aperture values, and ISO speeds, as adjusted by the camera. This is called AEB. * AEB stands for Auto Exposure Bracketing. 1Select [z: Expo.comp./AEB]. the AEB range. 2zSetz Turn the <6> dial to set the AEB range (1) (1). Press the keys to set the exposure compensation level. zz Press <0> to set it. zz When you close the menu, the AEB range will be displayed on the screen. the picture.
Auto Exposure Bracketing zz If [z: Auto Lighting Optimizer] (=149) is set to any setting other than [Disable], the effect of AEB may be reduced. zz [A] blinks in the lower left of the screen during AEB shooting. zz If the drive mode is set to [u], press the shutter button three times for each shot. When [E], [o], or [i] is set and you hold down the shutter button completely, the three bracketed shots will be taken consecutively and the camera will automatically stop shooting.
ISO Speed Settings M Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In Basic Zone modes, ISO speed is set automatically. Regarding the ISO speed during movie recording, see =277, =581. the button (9). 1zPress z With an image displayed on the screen, press the button. the ISO speed. 2zSetz Turn the <6> dial. zz Select [AUTO] to set the ISO speed automatically.
ISO Speed Settings ISO Speed Guide zz Low ISO speeds reduce image noise but may increase the risk of camera/subject shake or reduce the area in focus (shallower depth of field), in some shooting conditions. zz High ISO speeds enable low-light shooting, a larger area in focus (deeper depth of field), and longer flash range but may increase image noise.
ISO Speed Settings ISO Speed Range When Set Manually 1Select [z: zISO speed settings]. 2Select [ISO speed range]. the minimum limit. 3zSetz Select the minimum limit box, then press <0>. zz Select the ISO speed, then press <0>. the maximum limit. 4zSetz Select the maximum limit box, then press <0>. zz Select the ISO speed, then press <0>. 5Select [OK].
ISO Speed Settings ISO Speed Range Used With ISO Auto 1Select [Auto range]. the minimum limit. 2zSetz Select the minimum limit box, then press <0>. zz Select the ISO speed, then press <0>. the maximum limit. 3zSetz Select the maximum limit box, then press <0>. zz Select the ISO speed, then press <0>. 4Select [OK]. zz The [Minimum] and [Maximum] settings will also function as the minimum and maximum speeds for ISO speed safety shift (=531).
ISO Speed Settings Minimum Shutter Speed for ISO Auto You can set the minimum shutter speed for ISO Auto. This can help reduce camera shake and subject blur in or mode when shooting moving subjects with a wide-angle lens, or when using a telephoto lens. 1Select [Min. shutter spd.]. Automatically set the desired minimum shutter 2Set speed. zz If you select [Auto], turn the <6> dial to set a slower or faster speed, then press <0>.
ISO Speed Settings zz If a correct exposure cannot be obtained with the maximum ISO speed limit set with [Auto range], a shutter speed slower than the [Min. shutter spd.] will be set to obtain the standard exposure. zz This function will not be applied to flash photography and movie recording. zz When [Auto(Standard)] is set, the minimum shutter speed will be the reciprocal of the lens focal length. A single step from [Slower] to [Faster] is equivalent to a single stop of the shutter speed.
Auto Lighting Optimizer M Brightness and contrast can be corrected automatically if shots look dark or contrast is too low or high. [z: Auto Lighting 1Select Optimizer]. 2Set a correction option. zz Noise may increase and clarity may change, under some shooting conditions. zz If the effect of Auto Lighting Optimizer is too strong and results are not at your preferred brightness, set to [Low] or [Disable].
Highlight Tone Priority M You can reduce overexposed, clipped highlights. 1Select [z: Highlight tone priority]. an option. 2zSetz [Enable]: Improves gradation in highlights. The gradation between the grays and highlights becomes smoother. zz [Enhanced]: Reduces overexposed highlights even more than [Enable], under some shooting conditions. zz Noise may increase slightly. zz The available ISO range starts at ISO 200. Expanded ISO speeds cannot be set.
Metering Mode M You can select one of four methods to measure the subject brightness. In Basic Zone modes, evaluative metering is set automatically. 1Select [z: Metering mode]. 2Set the metering mode. zz [q] Evaluative metering General-purpose metering mode suited even for backlit subjects. The camera adjusts the exposure automatically to suit the scene. zz [w] Partial metering Effective where there are much brighter lights around the subject due to backlight, etc. Covers approx. 4.
Metering Mode zz By default, the camera will set the exposure as follows. With [q], holding down the shutter button halfway will lock the exposure setting (AE lock) after focus is achieved with One-Shot AF. In the [w], [r], and [e] modes, the exposure is set at the moment the picture is taken. (Pressing the shutter button halfway does not lock the exposure.) zz With [8: C.Fn I-7: AE lock meter.
Metering Timer M You can set how long the metering timer runs (which determines the duration of exposure display/AE lock) after it is triggered by an action such as pressing the shutter button halfway. 1Select [z: Metering timer]. 2Set a time option.
Exposure Simulation M Exposure simulation simulates and displays how the brightness (exposure) of the actual image will look. 1Select [z: Expo. simulation]. 2Set an option. zz Enable (g) The displayed image brightness will be close to the actual brightness (exposure) of the resulting image. If you set exposure compensation, the image brightness will change accordingly. zz During e Normally, the image is displayed at standard brightness, so it is easy to see (E).
White Balance M White balance (WB) is for making the white areas look white. Normally, the Auto [Q] (Ambience priority) or [Qw] (White priority) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with Auto, you can select the white balance to match the light source or set it manually by shooting a white object. 1Select [z: White balance]. 2Select an item. (Approx.
White Balance White Balance To the human eye, a white object looks white regardless of the type of lighting. With a digital camera, the white for color correction basis is decided depending on the color temperature of the illumination, and then the color is adjusted with software to make the white areas look white. With this function, you can take the pictures with natural color tones.
White Balance [Q] Auto White Balance With [Q], you can slightly increase the intensity of the image’s warm color cast when shooting a tungsten-light scene. If you select [Qw], you can reduce the intensity of the image’s warm color cast. 1Select [z: White balance]. [Q]. 2zSelect z With [Q] selected, press the button. 3Select an item. Cautions for Setting [Qw] zz The warm color cast of subjects may fade.
White Balance [O] Custom White Balance With custom white balance, you can manually set the white balance for the specific light source of the shooting location. Make sure to perform this procedure under the light source at the actual location of the shoot. a white object. 1zShoot z Aim the camera at a plain white subject, so that white fills the screen. zz Focus manually and shoot with the standard exposure set for the white object. zz You can use any of the white balance settings.
White Balance zz If the exposure obtained in step 1 differs greatly from the standard exposure, a correct white balance may not be obtained. zz These images cannot be selected: Images captured with Picture Style set to [Monochrome], images with a Creative filter applied before or after shooting, cropped images, or images shot with another camera. zz Images that cannot be used in the setting may be displayed.
White Balance Correction/Bracketing M White balance correction has the same effect as using a commercially available color temperature conversion filter or color compensating filter. White Balance Correction 1Select [z: WB Shift/Bkt.]. the white balance correction. 2zSetz Press the cross keys to move the Sample setting: A2, G1 [■] mark to your preferred position. zz B is for blue, A for amber, M for magenta, and G for green.
White Balance Correction/Bracketing White Balance Auto Bracketing White balance bracketing (WB Bkt.) enables you to capture three images at once with different color tones. B/A bias ±3 levels Set the white balance bracketing amount. zz In step 2 for “White Balance Correction” (=160), when you turn the <5> dial, the [■] mark on the screen will change to [■ ■ ■] (3 points). zz Turning the dial clockwise sets the B/A bracketing, and turning it counterclockwise sets the M/G bracketing.
Color Space M The range of reproducible colors is called “color space”. For normal shooting, sRGB is recommended. 1Select [z: Color space]. 2Set a color space option. Adobe RGB This color space is mainly used for commercial printing and other industrial uses. Recommended when using equipment such as Adobe RGBcompatible monitors or DCF 2.0 (Exif 2.21 or later) compatible printers. zz If the still photo is shot in the Adobe RGB color space, the first character in the file name will be an underscore “_”.
Picture Style Selection M Just by selecting a preset Picture Style, you can obtain image characteristics effectively matching your photographic expression or the subject. 1Select [z: Picture Style]. 2Select a Picture Style. Picture Style Characteristics zz [D] Auto The color tone will be adjusted automatically to suit the scene. The colors will look vivid for blue skies, greenery and sunsets, particularly in nature, outdoor and sunset scenes.
Picture Style Selection zz [R] Landscape For vivid blues and greens, and very sharp and crisp images. Effective for impressive landscapes. zz [u] Fine Detail Suited for detailed outline and fine texture description of the subject. The colors will be slightly vivid. zz [S] Neutral Suited for processing the image with a computer. For natural colors and subdued images with modest brightness and color saturation. zz [U] Faithful Suited for processing the image with a computer.
Picture Style Selection Symbols The Picture Style selection screen has icons for [Strength], [Fineness], or [Threshold] for [Sharpness] as well as [Contrast] and other settings. The numbers indicate the values for these settings specified for the respective Picture Style.
Picture Style Customization M You can customize any Picture Style by changing it from the default settings. To customize [Monochrome], see =168. 1Select [z: Picture Style]. a Picture Style. 2zSelect z Select the Picture Style to adjust, then press the button. an item. 3zSelect z See “Settings and Effects” (=167) for details on the settings and effects.
Picture Style Customization 4Set the effect level. zz Press the button to save the adjusted setting and return to the Picture Style selection screen. zz Any settings you change from default values are displayed in blue.
Picture Style Customization [V] Monochrome Adjustment Offers [Filter effect] and [Toning effect] options, besides the [Sharpness] options ([Strength], [Fineness], and [Threshold]) and [Contrast] options described on =167. [k] Filter effect Filter With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more. Sample Effects N: None Normal black-and-white image with no filter effects.
Picture Style Registration M You can select a base Picture Style such as [Portrait] or [Landscape], adjust it as desired, and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. Useful when creating several Picture Styles with different settings. Picture Styles that you have registered on the camera using EOS Utility (EOS software) can also be modified here. 1Select [z: Picture Style]. [User Def. *]. 2zSelect z Select [User Def. *], then press the button. <0>.
Picture Style Registration 5Select an item. effect level. 6zSetz Forthedetails, see “Picture Style Customization” (=166). zz Press the button to save the adjusted setting and return to the Picture Style selection screen. The base Picture Style will be indicated on the right of [User Def. *]. Blue style names indicate that you have changed the settings from default values. zz If a Picture Style is already registered under [User Def.
Long Exposure Noise Reduction M For images exposed for 1 sec. or longer, noise (dots of light and banding) typical of long exposures can be reduced. [z: Long exp. noise 1Select reduction]. 2Set a reduction option. zz [AUTO] Auto For exposures of 1 sec. or longer, noise reduction is performed automatically if noise typical of long exposures is detected. This [Auto] setting is effective enough in most cases. zz [ON] Enable Noise reduction is performed for all exposures of 1 sec. or longer.
High ISO Speed Noise Reduction M This function reduces the noise generated in the image. This function is especially effective when shooting at high ISO speeds. When shooting at low ISO speeds, the noise in the darker parts of the image (shadow areas) can further be reduced. 1Select [z: High ISO speed NR]. 2Set the level. zz [M] Multi Shot Noise Reduction Applies the noise reduction with higher image quality than [High].
High ISO Speed Noise Reduction Cautions for Setting Multi Shot Noise Reduction zz If there is significant misalignment in the image due to camera shake, the noise reduction effect may become smaller. zz If you are handholding the camera, keep it steady to prevent camera shake. Using a tripod is recommended. zz If you shoot a moving subject, the moving subject may leave afterimages. zz Auto image alignment may not function properly with repetitive patterns (lattice, stripes, etc.
Dust Delete Data Acquisition M Dust Delete Data used to erase dust spots can be appended to images in case sensor cleaning leaves dust on the sensor. The Dust Delete Data is used by Digital Photo Professional (EOS software) to erase the dust spots automatically. Preparation zz Prepare a solid white object such as a sheet of paper. zz Set the lens focal length to 50 mm or longer. zz Switch to manual focus and set the focus to infinity (∞). Dust Delete Data Acquisition 1Select [z: Dust Delete Data].
Dust Delete Data Acquisition a plain white object. 3zShoot z Shoot with a plain white object (such as a new sheet of white paper) filling the screen, at a distance of 20–30 cm (0.7–1.0 ft.). zz Since the image will not be saved, the data can still be obtained even if there is no card in the camera. When the picture is taken, the camera will start collecting the Dust Delete Data. When the Dust Delete Data is obtained, a message will appear.
HDR Mode M You can shoot still photos with clipped highlights and shadows reduced for a high dynamic range of tones even in high-contrast scenes. HDR shooting is effective for landscape and still-life shots. With HDR shooting, three images of different exposures (standard exposure, underexposure, and overexposure) are captured consecutively for each shot and then merged together automatically. The HDR image is recorded as a JPEG image. * HDR stands for High Dynamic Range. 1Select [z: HDR Mode].
HDR Mode Effects zz [P] Natural For images preserving a wide tonal range where the highlight and shadow details would otherwise be lost. Clipped highlights and shadows will be reduced. zz [A] Art standard While the clipped highlights and shadows will be reduced more than with [Natural], the contrast will be lower, and the gradation flatter to have the picture look like a painting. The subject outlines will have bright (or dark) edges.
HDR Mode a [Continuous HDR] option. 4zSetz With [1 shot only], HDR shooting will be canceled automatically after the shooting ends. zz With [Every shot], HDR shooting continues until the setting in step 2 is set to [Disable HDR]. Image Align] and shoot. 5zSetz For[Auto handheld shooting, select [Enable]. When using a tripod, select [Disable]. zz RAW HDR images are captured in JPEG 73 image quality. RAW+JPEG HDR images are captured in the specified JPEG image quality.
HDR Mode zz When shooting HDR images with [Auto Image Align] set to [Enable], AF point display information (=370) and Dust Delete Data (=174) will not be appended to the image. zz If you perform handheld HDR shooting with [Auto Image Align] set to [Enable], image periphery will be slightly trimmed and resolution will be slightly lowered. Also, if the images cannot be aligned properly due to camera shake, etc., auto image alignment may not take effect.
Focus Bracketing M Focus bracketing* enables continuous shooting with the focal distance changed automatically after a single shot. From these images, you can create a single image in focus over a wide area by using an application that supports depth compositing, such as Digital Photo Professional (EOS software). * “Bkt.” stands for bracketing. 1Select [z: Focus bracketing]. [Focus bracketing]. 2zSpecify z Select [Enable]. the number of images. 3zSetz Specify the number of images captured per shot.
Focus Bracketing [Focus increment]. 4zSetz Specify how much to shift the focus. This amount is automatically adjusted to suit the aperture value at the time of shooting. Because larger aperture values increase the focus shift, focus bracketing covers a wider range under the same [Focus increment] and [Number of shots] settings in that case. zz After completing the settings, press <0>. smoothing].
Focus Bracketing zz Focus bracketing is intended for still photo shooting on a tripod. zz Shooting with a wider angle of view is recommended. After depth compositing, you can crop the image if necessary. zz The following lenses can be used (as of April 2019). yyEF16-35mm f/4L IS USM yyEF24-70mm f/4L IS USM yyEF100mm f/2.8L MACRO IS USM yyEF180mm f/3.5L MACRO USM yyEF-M28mm f/3.5 MACRO IS STM yyEF-M15-45mm f/3.5-6.3 IS STM yyEF-M18-150mm f/3.5-6.3 IS STM yyEF-S35mm f/2.8 MACRO IS STM yyEF-S60mm f/2.
Focus Bracketing zz Use of a tripod, remote switch (sold separately, =223), or wireless remote control (sold separately, =223) is recommended. zz For best results, set the aperture value in a range of f/5.6–11 before shooting. zz Details such as shutter speed, aperture value, and ISO speed are determined by conditions for the first shot. zz To cancel shooting, press the shutter button completely again. zz [Focus bracketing] switches to [Disable] when the power switch is set to <2>.
Touch Shutter Just by tapping on the screen, you can focus and take the picture automatically. the Touch Shutter. 1zEnable z Tap [y] on the screen’s bottom left. zz Each time you tap on the icon, it will toggle between [y] and [x]. zz [x] (Touch Shutter: Enable) The camera will focus on the spot you tap on, then the picture will be taken. zz [y] (Touch Shutter: Disable) You can tap on a spot to perform focusing on the spot. Press the shutter button completely to take the picture. to shoot.
Touch Shutter zz Even if you set the drive mode to [E], [o], or [i], the camera will still shoot in the single shooting mode. zz Even if [AF operation] is set to [Servo AF], tapping on the screen will focus on the image with [One-Shot AF]. zz Tapping on the screen in magnified view will not focus or take the picture. zz If you shoot by tapping on the screen with [z: Image review] set to [Hold], you can press the shutter button halfway to take the next shot.
Shutter Release Method M You can choose how the shutter is released. 1Select [z: Shutter mode]. 2Select an item. zz Mechanical Shooting activates the mechanical shutter. Be sure to set it to [Mechanical] if you use a TS-E lens (except TS-E17mm f/4L or TS-E24mm f/3.5L II) for shifting or tilting the lens or if you use an extension tube. If [Electronic] is set, the standard exposure may not be obtained, or an irregular exposure may result. zz Electronic Enables you to shoot at a maximum 1/16000 sec.
Interval Timer With the interval timer, you can set the shooting interval and number of shots, so that the camera takes individual shots repeatedly according to your interval until your specified number of shots are taken. 1Select [z: Interval timer]. [Enable]. 2zSelect z Select [Enable], then press the button. the shooting interval and 3Set number of shots. zz Select an item to set (hours : minutes : seconds / number of shots). zz Press <0> to display [r].
Interval Timer (1) (2) [OK]. 4zSelect z The interval timer settings will be displayed on the menu screen. (1) (2) Interval Number of shots the picture. 5zTake z First shot is taken and shooting continues according to the interval timer settings. zz During interval timer shooting, [H] will blink. zz After the set number of shots are taken, the interval timer shooting will stop and be automatically canceled. zz Using a tripod is recommended. zz Taking test shots in advance is recommended.
Interval Timer zz With some lenses, the focal position may change if auto power off is activated during interval timer shooting. For details, refer to the Canon website. zz Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. zz Switching to AF focus mode prevents the camera from shooting unless subjects are in focus.
Long (Bulb) Exposures M In this mode, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutter button. Use bulb exposures for night scenes, fireworks, the heavens, and other subjects requiring long exposures. 1Set the Mode dial to . the shutter speed to [BULB]. 2zSetz Turn the <6> dial to set it. the picture. 3zTake z The exposure will continue for as long as you keep the shutter button pressed completely.
Long (Bulb) Exposures zz With [z: Long exp. noise reduction], you can reduce the noise generated during long exposures (=171). zz To reduce camera shake, consider using a tripod and an optional remote controller (Remote Switch RS-60E3 or Wireless Remote Control BR-E1), or the bulb timer. Bulb Timer Using the bulb timer eliminates the need to keep holding down the shutter button during exposure. Note that the bulb timer is only available in mode with the shutter speed set to [BULB].
Long (Bulb) Exposures the desired exposure time. 3zSetz Select the hour, minute, or second. zz Press <0> to display [r]. zz Set the desired number, then press <0>. (Returns to [s].) 4Select [OK]. the picture. 5zTake z Press the shutter button completely, and after shooting begins, release it. zz [H] and the exposure time are displayed. zz To stop shooting in progress, press the shutter button completely again and release it. zz To cancel the timer setting, set [Disable] in step 2.
Anti-flicker Shooting M If you shoot an image with a fast shutter speed under a light source such as fluorescent light, the blinking of the light source causes flicker and the image may be vertically unevenly exposed. If continuous shooting is used under these conditions, uneven exposures or colors across the images may result. Anti-flicker shooting enables you to take pictures when exposure and colors are less affected by flickering. 1Select [z: Anti-flicker shoot.]. 2Select [Enable]. the picture.
Anti-flicker Shooting zz With [Enable] set, the shutter-release time lag is longer when you shoot under a flickering light source. Also, the continuous shooting speed may become slower, and the shooting interval may become irregular. zz This function will not be applied to movie recording. zz Flicker at a frequency other than 100 Hz or 120 Hz cannot be detected. Also, if the flickering frequency of the light source changes during continuous shooting, effects of the flicker cannot be reduced.
AF Operation M You can select the AF operation characteristics to suit the shooting conditions or subject. 1Select [z: AF operation]. 2Select a setting item. zz If focus cannot be achieved, the AF point will turn orange. If this occurs, the picture cannot be taken even if the shutter button is pressed completely. Recompose the shot and try to focus again. Or, see “Shooting Conditions that Make Focusing Difficult” (=208).
AF Operation One-Shot AF for Still Subjects (ONE SHOT) This AF operation is suited for still subjects. When you press the shutter button halfway, the camera will focus only once. zz When focus is achieved, the AF point will turn green and the beeper will sound. zz The focus remains locked while you hold down the shutter button halfway, allowing you to recompose the image before taking the picture. zz For details on the continuous shooting speed for continuous shooting, see =133.
AF Operation AF-Assist Beam The AF-assist beam (=34) may fire when you press the shutter button halfway under low light or in similar conditions, to make autofocusing easier. zz The AF-assist beam does not fire when [z: AF operation] is set to [Servo AF]. zz When you are using a Speedlite equipped with an LED AF-assist beam, the Speedlite fires an AF-assist beam as needed.
AF Method You can select the AF method to suit the shooting conditions or subject. The camera attempts to focus on faces of any people in an AF point or Zone AF frame. In mode, [u+Tracking] is set automatically. For instructions on selecting an AF method, see =200. AF Method : Face+Tracking The camera detects and focuses on people’s faces. [p] (an AF point) appears over any face detected, which is then tracked. If no face is detected, the entire AF area is used for auto selection AF.
AF Method : Zone AF Uses auto selection AF in Zone AF frames to cover a large area, which makes focusing easier. Prioritizes focusing on the nearest subject. Faces of any people in the Zone AF frame are also given priority in focusing. AF points in focus are displayed with [S].
AF Method Selecting the AF Method You can select the AF method to suit the shooting conditions or subject. If you prefer to focus manually, see =218. 1Select [z: AF method]. 2Select a setting item. zz To set the AF method, you can also access the AF method screen by pressing the button and then the button. zz The descriptions on =201–=204 assume that the AF operation is set to [One-Shot AF] (=196). With [Servo AF] (=196) set, the AF point will turn blue when focus is achieved.
AF Method zz u(face)+Tracking: c The camera detects and focuses on human faces. If a face moves, the AF point [p] also moves to track the face. the AF point. 1zCheck z [p] (an AF point) appears over any face detected. zz You can choose a face with the keys when [h] appears after you press the button. on the subject. 2zFocus z Once you press the shutter button halfway and the subject is in focus, the AF point turns green and the camera beeps.
AF Method Tapping a Face for Focus Tapping a face or subject to focus on changes the AF point to [ ] and focuses where you tap. Even if the face or subject moves on the screen, the AF point [ ] moves to track it. zz If the subject’s face is significantly out of focus, face detection will not be possible. Adjust the focus manually (=218) so that the face can be detected, then perform AF. zz An object other than a human face may be detected as a face.
AF Method zz Spot AF/1-point AF/Zone AF You can manually set the AF point or Zone AF frame. Here, 1-point AF screens are used as an example. the AF point. 1zCheck z The AF point (1) will appear. With Zone AF, the Zone AF frame is displayed. (1) the AF point. 2zMove z Press the button. zz Use the cross keys to move the AF point to where you want to focus (but note that with some lenses, it may not move to the edge of the screen). zz You can also tap the screen to move the AF point.
AF Method on the subject. 3zFocus z Aim the AF point over the subject and press the shutter button halfway. When focus is achieved, the AF point will turn green and the beeper will sound. If focus is not achieved, the AF point will turn orange. 4Take the picture. zz AF points may not track subjects under some shooting conditions when Servo AF is used with Zone AF. zz Focusing with an AF-assist beam may be difficult when using a peripheral AF point. In this case, select an AF point in the center.
AF Method Magnified View You can check the focus by tapping [u] to magnify display by approx. 5× or 10×. Magnified view is not possible with [u+Tracking]. zz Magnification is centered on the AF point for [Spot AF] or [1-point AF] and on the Zone AF frame for [Zone AF]. zz Autofocusing is performed with magnified display if you press the shutter button halfway when set to [1-point AF], and [Spot AF]. When set to [Zone AF], autofocusing is performed after restoring normal display.
AF Method Setting the Initial Servo AF Position 1. Set [8: C.Fn II-3: Initial Servo AF pt for c] to an option other than [Auto]. 2. An Area AF frame (1) and AF point (2) are displayed. (1) (2) 3. To move the AF point into position for focusing, press the button, then use the <6> <5> dials or cross keys. Pressing the button will return the AF point to the screen center. You can also tap the screen to move the AF point. 4.
AF Method AF Shooting Tips zz Even when focus is achieved, pressing the shutter button halfway will focus again. zz Image brightness may change during autofocusing. zz Depending on the subject and shooting conditions, it may take longer to focus, or the continuous shooting speed may decrease. zz If the light source changes as you shoot, the screen may flicker, and focusing may be difficult. In this case, restart the camera and resume shooting with AF under the light source you will use.
AF Method Shooting Conditions that Make Focusing Difficult zz Subject with low-contrast such as the blue sky, solid-color flat surfaces or when highlight or shadow details are clipped. zz Subjects in low light. zz Stripes and other patterns where there is contrast only in the horizontal direction. zz Subjects with repetitive patterns (Example: Skyscraper windows, computer keyboards, etc.). zz Fine lines and subject outlines. zz Under a light source whose brightness, color, or pattern keeps changing.
Eye Detection AF With the AF method set to [u+Tracking], the camera can focus on people’s eyes. 1Select [z: Eye Detection AF]. 2Select [Enable]. the camera at the subject. 3zAim z An AF point is displayed around their eye. zz You can tap the screen to select an eye for focus. zz The entire face is selected when you tap other facial features, such as their nose or mouth. Eyes to focus on are selected automatically.
Eye Detection AF zz Subject eyes may not be detected correctly, depending on the subject and shooting conditions. zz To disable Eye Detection AF without using menu operations, press these buttons, one after another: , , and . To resume Eye Detection AF, press the button again.
Continuous AF This function keeps subjects generally in focus. The camera is ready to focus immediately when you press the shutter button halfway. 1Select [z: Continuous AF]. 2Select [Enable]. zz Enabling this function reduces the number of shots available, because the lens is driven continuously and battery power is consumed.
Touch & Drag AF AF points or Zone AF frames can be moved by tapping or dragging the screen as you look through an optional electronic viewfinder. Enabling Touch & Drag AF [z: Touch & drag AF 1Select settings]. [Touch & drag AF]. 2zSelect z Select [Enable]. Positioning Method You can set how positions are specified by touching or dragging. 1Set the positioning method. zz [Absolute] The AF point moves to the touched or dragged position on the screen.
Touch & Drag AF Active Touch Area You can specify the area of the screen used for touch and drag operations. 1Set the active touch area. zz Touching the screen when [u+Tracking] is set displays a round orange frame [ ]. After you lift your finger at the position to move the AF point to, [ ] is displayed and that subject is tracked. To cancel subject selection, press the button.
Manually Focusing with a Lens after AF M For EF-M, EF, or EF-S lenses equipped with electronic manual focusing, you can specify how manual focus adjustment is used with One-Shot AF. 1Select [z: Lens electronic MF]. 2Select an item. zz [ ] Disable after One-Shot AF zz [ ] Enable after One-Shot AF Manual focus adjustment after the AF operation is disabled. You can manually adjust the focus after the AF operation if you keep holding down the shutter button halfway.
AF-Assist Beam Firing You can use the AF-assist beam of the camera or a Speedlite. 1Select [z: AF-assist beam firing]. 2Select an item. zz [ON] Enable Enables firing of the AF-assist beam of the camera or a Speedlite equipped with an LED AF-assist beam, when needed. zz [OFF] Disable Disables firing of the AF-assist beam.
Image Stabilization You can adjust the Image Stabilizer (IS) setting of lenses equipped with optical image stabilization. For details on [k Digital IS], see =268. 1Select [z: IS settings]. 2Select [IS mode]. 3Set an option. zz [Off] Deactivates image stabilization. zz [On] Camera shake will be corrected. zz If image stabilization cannot prevent camera shake, mount the camera on a tripod or take other measures to hold it still.
Exposure Lock (AE Lock) M You can lock the exposure when you want to set the focus and exposure separately or when you are to take multiple shots at the same exposure setting. Press the button to lock the exposure, then recompose and take the picture. It is effective for shooting backlit subjects, etc. on the subject. 1zFocus z Press the shutter button halfway. the button (4). 2zPress z A [A] icon is displayed in the lower left of the screen to indicate that exposure is locked (AE lock).
Manual Focus If focusing is not possible with autofocus, you can magnify the image and focus manually. the focus mode switch to . 1zSetz Turn the lens focusing ring to focus roughly. an area to magnify. 2zDetermine z Press the button to activate magnified display, then move it to where you want to focus by using the <6> dial or the cross keys. zz To center the magnified area, press the button. the image. 3zMagnify z Each turn of the <5> dial changes the screen, as follows.
Manual Focus manually. 4zFocus z While looking at the magnified image, turn the lens focusing ring to focus. zz After focusing, press <0> to return to the normal view. 5Take the picture. zz When using non EF-M lenses, set the lens’s focus mode switch to in step 1. zz When [AF] is displayed in step 1 during movie recording with an EF-M lens, you can tap the icon to change it to an [MF] icon.
MF Peaking (Outline Emphasis) Edges of subjects in focus can be displayed in color as you focus manually to make it easier to focus. You can set the outline color and adjust the sensitivity (level) of edge detection (except in mode). 1Select [z: MF peaking settings]. [Peaking]. 2zSelect z Select [On]. and color. 3zSetz Settheit aslevel necessary. zz Peaking display is not shown during magnified display. zz MF peaking may be hard to discern at high ISO speeds, especially when ISO expansion is set.
Focus Mode Switching By disabling the focus mode switch of EF-M lenses, you can enable menubased focus mode switching. 1Select [5: switch (AF/MF)]. [Disable]. 2zSelect z The [z: Focus mode] menu setting now applies instead of the focus mode switch, which is deactivated. 3Select [z: Focus mode]. a setting item. 4zSelect z [AF]: Autofocus zz [MF]: Manual focus Note that in some Basic Zone modes, autofocus is used regardless of this setting.
Type of Digest Movie Both still photos and clips are captured when you shoot in mode, but you can specify whether to include the still photos in the resulting digest movie. 1Enter mode. 2Select [z: Digest type]. 3Set an option. zz [Include stills] Digest movies include still photos. zz [No stills] Digest movies do not include still photos.
Remote Control Shooting Remote control shooting is supported with Wireless Remote Control BR-E1 or Remote Switch RS-60E3 (Bluetooth and wired connections, respectively; sold separately). Wireless Remote Control BR-E1 You can shoot remotely up to approx. 5 meters/16.4 feet away from the camera. After pairing the camera and BR-E1 (=446), set the drive mode to [Q] or [k] (=135). For operation procedures, refer to the BR-E1 instruction manual.
General Still Photo Shooting Cautions zz Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. Image Quality zz When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable. zz Shooting in high temperatures may cause noise and irregular colors in the image.
General Still Photo Shooting Cautions Images and Display zz Under low- or bright-light conditions, the displayed image may not reflect the brightness of the captured image. zz Under low light, noise may be noticeable in image display even at low ISO speeds, but there will be less noise in your shots, because image quality varies between display and captured images. zz The screen or exposure value may flicker if the light source (lighting) changes.
General Still Photo Shooting Cautions Information Display For details on the icons displayed for still photo shooting, see =583. zz When [g] is displayed in white, it indicates that the image is displayed at the brightness level closely matching that of the actual image to be captured. zz If [g] is blinking, it indicates that the image is displayed at a brightness that differs from the actual shooting result because of low- or bright-light conditions.
Movie Recording For movie recording, set the Mode dial to . zz You can record movies by pressing the movie shooting button during still photo shooting. zz You can also specify movie recording mode from [z: Shooting mode] after setting the Mode dial to .
Tab Menus: Movie Recording zz Shooting 1 =232 =241 =248 =128 =223 =250 =261 zz Shooting 2 =140 =277 =149 =150 =153 zz Shooting 3 =155 =158 =160 =163 =172 228
Tab Menus: Movie Recording zz Shooting 4 =198 =209 =212 =214 zz Shooting 5 =220 =216 =270 =221 =278 zz Shooting 6 =271 =279 =273 =274 229
Tab Menus: Movie Recording In [u] mode, the following screens are displayed.
Tab Menus: Movie Recording zz Shooting 4 =271 231
Movie Mode Recording with [Movie auto exposure] Autoexposure control will take effect to suit the scene’s current brightness. 1Set the Mode dial to . 2Press <0>. [k]. 3zSelect z Use the keys to select [k (Movie auto exposure)], then press <0>. on the subject. 4zFocus z Before recording a movie, focus with AF or manual focus (=200–=208, =218). zz By default, [z: Movie Servo AF] is set to [Enable] so that the camera always keeps focusing (=271).
Movie Mode the movie. 5zRecord z Press the movie shooting button to start (1) recording a movie. zz While the movie is being recorded, the [oREC] mark (1) will be displayed on the upper right of the screen. zz Sound is recorded by the microphones at the positions indicated (2). zz To stop recording the movie, press the movie shooting button again. (2) zz The Quick Control screen appears after step 2 when [5: Mode guide] is set to [Disable]. Use the keys to select [k].
Movie Mode Recording with [Movie manual exp.] You can manually set the shutter speed, aperture, and ISO speed for movie recording. 1Set the Mode dial to . 2Press <0>. [M]. 3zSelect z Use the keys to select [M (Movie manual exp.)], then press <0>. the ISO speed. 4zSetz Press the button. zz Use the keys to set it.
Movie Mode the shutter speed (1) and 5Set aperture value (2). zz To set the shutter speed, turn the <6> dial. To set the aperture value, turn the <5> dial. zz Shutter speed can be set in a range of 1/4000–1/8 sec. (1) (2) and record the movie. 6zFocus z The procedure is the same as steps 4 and 5 for “Recording with [Movie auto exposure]” (=232). zz The Quick Control screen appears after step 2 when [5: Mode guide] is set to [Disable]. Use the keys to select [M].
Movie Mode zz When switching from still photo shooting to movie recording, check the camera settings again before recording movies. zz During movie recording, avoid changing the shutter speed or aperture. Doing so may record the changes in the exposure or create more noise at high ISO speeds. zz When recording a movie of a moving subject, a shutter speed of approx. 1/25 sec. to 1/125 sec. is recommended. The faster the shutter speed, the less smooth the subject’s movement will look.
Movie Mode Cautions for Movie Recording zz Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. zz If you shoot something that has fine detail, moire or false colors may result. zz If [Q] or [Qw] is set and the ISO speed or aperture changes during movie recording, the white balance may also change.
Movie Mode Notes for Movie Recording zz Each time you record a movie, a new movie file is created on the card. zz The movie’s field of view coverage for recording 4K, Full HD, and HD movies is approx. 100%. zz You can also focus by pressing the AF start button. zz To enable starting or stopping movie recording by pressing the shutter button completely, set [Fully-press] for [5: Shutter btn function for movies] to [Start/stop mov rec]. zz Stereo sound is recorded by the camera’s built-in microphone (=233).
HDR Movie Mode You can shoot high dynamic range movies that retain detail in highlights of high-contrast scenes. 1Set the Mode dial to . 2Press <0>. [u]. 3zSelect z Use the keys to select [u (HDR Movie)], then press <0>. an HDR movie. 4zRecord z Record the movie in the same way as normal movie recording. zz For details on file sizes and the recording time available, see the table on =580.
HDR Movie Mode zz Since multiple frames are merged to create an HDR movie, certain parts of the movie may look distorted. During handheld recording, camera shake may make the distortion look more noticeable. Using a tripod is recommended. Note that even if a tripod is used for recording, afterimages or noise may become more noticeable when the HDR movie is played back frame-by-frame or in slowmotion compared to normal playback.
Movie Recording Quality On the [z: Movie rec quality] tab, select [Movie rec. size] to set the image size, frame rate, and compression method. The movie will be recorded as an MP4 file. The frame rate displayed on the [Movie rec. size] screen switches automatically depending on the [5: Video system] setting (=502). zz The card’s writing and reading speeds required for recording movies (card performance requirements) vary depending on the movie recording size.
Movie Recording Quality 4K Movie Recording zz Recording 4K movies requires a high-performance card. For details, see “Cards that Can Record Movies” (=579). zz Recording 4K movies greatly increases the processing load, which may cause the camera’s internal temperature to increase faster or become higher than for regular movies. If a red [E] icon or [F] appears during movie recording, the card may be hot, so stop recording the movie and let the camera cool down before removing the card.
Movie Recording Quality Frame Rate (fps: frame per second) zz [2] 119.88fps/[8] 59.94fps/[6] 29.97fps For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.). zz [3] 100.00fps/[7] 50.00fps/[5] 25.00fps For areas where the TV system is PAL (Europe, Russia, China, Australia, etc.). Compression Method zz [X] IPB (Standard) Compresses multiple frames at a time efficiently for recording.
Movie Recording Quality Cards that Can Record Movies For details on cards you can use for various movie recording sizes, see =579. When recording movies, use a high-capacity card with a writing/reading speed (as specified in card performance requirements) shown in the table on =579 or higher than the standard specification. Test cards by recording a few movies to make sure they can record correctly at your specified size (=241). zz Format cards before recording 4K movies (=490).
Movie Recording Quality High Frame Rate You can record Full HD movies at a high frame rate of 119.88 fps or 100.00 fps by setting [High Frame Rate] under [z: Movie rec quality] to [Enable]. This is ideal for recording movies that will be played back in slow motion. The maximum recording time per movie is 7 min. 29 sec. Movies are recorded as L2X or L3X. They are recorded cropped around the center of the shooting screen.
Movie Recording Quality Movie Files Exceeding 4 GB Even if you record a movie exceeding 4 GB, you can keep recording without interruption. zz Using SD/SDHC cards formatted with the camera If you use the camera to format an SD/SDHC card, the camera will format it in FAT32. With a FAT32-formatted card, if you record a movie and the file size exceeds 4 GB, a new movie file will be created automatically. When you play back the movie, you will have to play back each movie file individually.
Movie Recording Quality Total Movie Recording Time and File Size Per Minute For details on file sizes and the recording time available at each movie recording size, see =580. Movie Recording Time Limit zz When recording non-High Frame Rate movies The maximum recording time per movie is 29 min. 59 sec. Once 29 min. 59 sec. is reached, recording automatically stops. You can start recording a movie again by pressing the movie shooting button (which records the movie as a new file).
Sound Recording You can record movies while recording sound with the built-in stereo microphone or an external stereo microphone. You can also freely adjust the sound-recording level. Use [z: Sound recording] to set sound recording functions. Sound Recording/Sound-Recording Level zz Auto The sound-recording level is adjusted automatically. Auto level control will take effect automatically in response to the sound level. zz Manual You can adjust the sound-recording level as needed. Select [Rec.
Sound Recording Attenuator Automatically suppresses sound distortion caused by loud noises. Even if [Sound rec.] is set to [Auto] or [Manual] for recording, sound distortion may still result if there is a very loud sound. In this case, setting it to [Enable] is recommended. External Microphone Normally, the camera’s built-in microphone records in stereo. If an external microphone equipped with a miniature stereo plug (3.
Time-lapse Movies Still photos shot at a set interval can be stitched together automatically to create a 4K or Full HD time-lapse movie. A time-lapse movie shows how a subject changes in a much shorter period of time than the actual time it took. It is effective for a fixed-point observation of changing scenery, growing plants, celestial motion, etc.
Time-lapse Movies the shooting interval. 5zSetz Select [Interval/shots]. zz Select [Interval] (sec.). Use the keys to set a value, then press <0>. zz Refer to [k: Time required] (1) and [3: Playback time] (2) to set the number. (1) (2) When [Custom] is set zz Select [Interval] (min.:sec.). (An interval of once per second is not available.) zz Press <0> to display [r]. zz Set the desired number, then press <0>. (Returns to [s].) zz Select [OK] to register the setting. the number of shots.
Time-lapse Movies zz With [Scene**], available intervals and numbers of shots are restricted, to suit the type of scene. zz The H6/H5 bit rate is approx. 300 Mbps, and the L6/L5 bit rate, approx. 90 Mbps. Use a card with a sufficiently fast read speed. zz If the number of shots is set to 3600, the time-lapse movie will be approx. 2 min. in NTSC and approx. 2 min. 24 sec. in PAL. the desired movie recording 7Select size. zz H (3840×2160) The movie is recorded in 4K quality. The aspect ratio is 16:9.
Time-lapse Movies 8Configure [Auto exposure]. zz Fixed 1st frame When taking the first shot, metering is performed to set the exposure automatically to match the brightness. The exposure setting for the first shot will be applied to subsequent shots. Other shooting-related settings for the first shot will also be applied for subsequent shots. zz Each frame Metering is also performed for each subsequent shot to set the exposure automatically to match the brightness.
Time-lapse Movies the beeper. 10 zSetz Select [Beep as img taken]. zz If [Disable] is set, the beeper will not sound for shooting. 11 Check the settings. (1) (2) (1) Time required Indicates the time required to shoot the set number of shots with the set interval. If it exceeds 24 hours, “*** days” will be displayed.
Time-lapse Movies the message. 13 zRead z Read the message and select [OK]. test shots. 14 zTake z As with still photo shooting, set the exposure and shooting functions, then press the shutter button halfway to focus. zz Press the shutter button completely to take test shots. The still photos will be recorded to the card. zz If there are no problems with the test shots, go to the next step. zz To take test shots again, repeat this step. zz Test shots are captured in JPEG 73 quality.
Time-lapse Movies the movie shooting button. 15 zPress z The camera will be ready to start recording a time-lapse movie. zz To return to step 14, press the movie shooting button again. the time-lapse movie. 16 zRecord z Press the button and check (1) 256 (2) again the “Time required (1)” and “Interval (2)” displayed on the screen. zz Press the shutter button completely to start recording the time-lapse movie. zz AF will not work during time-lapse movie recording.
Time-lapse Movies zz If the card does not have enough free space to record the set number of shots, [Playback time] will be displayed in red. Although the camera can continue shooting, the shooting will stop when the card becomes full. zz If the movie file size exceeds 4 GB with the [No. of shots] settings and the card is not formatted in exFAT (=491), [Playback time] will be displayed in red.
Time-lapse Movies zz If the shutter speed exceeds the shooting interval (such as for long exposures), or if a slow shutter speed is set automatically, the camera may not be able to shoot at the set interval. Shooting may also be prevented by shooting intervals nearly the same as the shutter speed. zz If the next scheduled shot is not possible, it will be skipped. This may shorten the recording time of the created time-lapse movie.
Time-lapse Movies zz Using a tripod is recommended. zz Taking test shots as in step 14 and recording test movies for time-lapse movies beforehand is recommended. zz The movie’s field of view coverage for both the 4K and Full HD time-lapse movie recording is approx. 100%. zz To cancel the time-lapse movie recording in progress, either press the shutter button completely or press the movie shooting button. The time-lapse movie shot so far will be recorded on the card.
Time-lapse Movies zz You can use Wireless Remote Control BR-E1 (sold separately) to start and stop the time-lapse movie recording. With Wireless Remote Control BR-E1 yyFirst, pair the Wireless Remote Control BR-E1 with the camera (=446). yyMake sure [z: Remote control] is set to [Enable]. yyTake test shots, then when the camera is ready to shoot (as in step 15 on =256), set the BR-E1’s release timing/movie shooting switch to (immediate release) or <2> (release after 2-sec. delay).
Video Snapshots Record a series of short video snapshots, each a few seconds long, and the camera will combine them to create a video snapshot album that shows these highlights of your trip or event. Video snapshots are available when the movie recording size is set to L6X (NTSC) / L5X (PAL). Video snapshot albums can also be played back with background music (=353). Creating a Video Snapshot Album Video snapshot 1 Video snapshot 2 Video snapshot ** Video snapshot album a shooting mode.
Video Snapshots 4Select [Album settings]. [Create a new album]. 5zSelect z Read the message and select [OK]. the playback time. 6zSpecify z Specify playback time per video snapshot. the playback effect. 7zSpecify z This setting determines how fast albums are played back. the required recording time. 8zCheck z The time required to record each video snapshot is indicated (1), based on the playback time and effect.
Video Snapshots the menu. 9zClose z Press the button to close the menu. zz A blue bar is displayed to indicate the recording time (2). (2) the first video snapshot. 10 zRecord z Press the movie shooting button to start recording. zz The blue bar indicating recording time gradually decreases, and after the specified time elapses, recording stops automatically. zz A confirmation message is displayed (=264). as a video snapshot album. 11 zSave z Select [J Save as album].
Video Snapshots recording video snapshots. 13 zStop z Set [Video snapshot] to [Disable]. To return to normal movie recording, be sure to specify [Disable]. zz Press the button to close the menu and return to normal movie recording. Options in Steps 11 and 12 Function Description J Save as album (Step 11) Saves the clip as the first video snapshot in an album. J Add to album (Step 12) Adds the current video snapshot to the album recorded most recently.
Video Snapshots Adding to an Existing Album [Add to existing album]. 1zSelect z Follow step 5 on =262 to select [Add to existing album]. an existing album. 2zSelect z Use the keys to select an existing album, then press <0>. zz Select [OK]. zz Some video snapshot settings will be updated to match settings of the existing album. the menu. 3zClose z Press the button to close the menu. zz The video snapshot recording screen is displayed. a video snapshot.
Miniature Effect Movie By blurring image areas outside a selected area, you can record movies with a miniature model effect applied. a shooting mode. 1zSelect z Select [k] (=232) or [M] (=234). [c]. 2zSelect z Press <0>, and on the Quick Control screen, select [c] in [ ]. the scene frame. 3zMove z To make the scene frame movable (displayed in orange), press the button or tap [r] in the lower right of the screen.
Miniature Effect Movie the AF point. 4zMove z Use the cross keys to move the AF point to the position to focus on, then press <0>. 5Record the movie. Estimated playback speed and time for a movie recorded for one minute Speed Playback Time Approx. 12 sec. Approx. 6 sec. Approx. 3 sec. zz Sound is not recorded. zz Speed can be changed by pressing the button in step 2. zz To make people and objects in the scene move quickly during playback, select ], [ ], or [ ] before recording the movie.
Movie Digital IS In-camera image stabilization electronically corrects camera shake during movie recording. This function is called “Movie digital IS”. With Movie digital IS, images can be stabilized even when using a lens without Image Stabilizer. When using a lens with built-in optical Image Stabilizer, set the lens’s Image Stabilizer switch to <1>. 1Select [z: IS settings]. 2Select [k Digital IS]. 3Select a setting item. zz Disable (v) Image stabilization with Movie digital IS is disabled.
Movie Digital IS Combination IS Even more effective correction is possible by recording movies with Movie digital IS and a Combination IS-compatible lens, which will combine optical and digital image stabilization by the lens and camera. zz Movie digital IS will not function when the lens’s optical Image Stabilizer switch is set to <2>. zz With a lens whose focal length is longer than 800 mm, Movie digital IS will not function.
Auto Level for Movies Auto leveling helps keep movies straight as you record them. Once recording begins, the display area may narrow, and subjects may be enlarged. 1Select [z: k Auto level]. 2Select [Enable]. zz Available when [k Digital IS] is set to [Disable].
Movie Servo AF With this function enabled, the camera focuses on the subject continuously during movie recording. 1Select [z: Movie Servo AF]. 2Select [Enable]. zz When [Enable] is set: zz The camera focuses on the subject continuously even when you are not pressing the shutter button halfway. zz To keep the focus at a specific position, or if you prefer not to record mechanical sounds from the lens, you can temporarily stop Movie Servo AF by touching [Z] in the lower left of the screen.
Movie Servo AF Cautions When [Movie Servo AF] is Set to [Enable] zz Shooting Conditions that Make Focusing Difficult yyA fast-moving subject approaching or moving away from the camera. yyA subject moving at a close distance to the camera. yyWhen shooting with a higher f/number. yyAlso see “Shooting Conditions that Make Focusing Difficult” (=208). zz Since the lens is driven continuously and the battery power is consumed, the possible movie recording time (=580) will be shortened.
Movie Servo AF Movie Servo AF Track Sensitivity You can adjust the tracking sensitivity (to one of seven levels), which affects responsiveness if the subject strays from the AF point during Movie Servo AF, as when interfering objects move across AF points or when you pan. [z: Movie Servo AF track 1Select sens.]. zz Locked on: –3/–2/–1 With this setting, the camera is less likely to track a different subject if the main subject strays from the AF point.
Movie Servo AF Movie Servo AF Speed You can set the Movie Servo AF’s AF speed and its operation conditions. The function is enabled when using a lens supporting slow focus transition during movie recording*. 1Select [z: Movie Servo AF speed]. zz When active: You can set [Always on] to have the AF speed take effect at all times for movie recording (before and during movie recording) or set [During shooting] to have the AF speed take effect only during movie recording.
Movie Servo AF zz With certain lenses, even if you adjust the AF speed, the speed may not change. zz Available when [z: Movie Servo AF] is set to [Enable] and [z: AF method] is set to [1-point AF]. zz Operation when [z: AF method] is set to an option other than [1-point AF] is equivalent to setting [AF speed] to [Standard (0)]. zz An asterisk to the right of [z: Movie Servo AF speed] indicates that the default setting has been modified.
Other Menu Functions [z1] zz Lens aberration correction Peripheral illumination and chromatic aberration can be corrected as you record movies. For details on lens aberration correction, see =128. zz Remote control shooting When [Enable] is set, you can start or stop movie recording using Wireless Remote Control BR-E1 (sold separately). First, pair the BR-E1 with the camera (=446).
Other Menu Functions [z2] zz k ISO speed settings ISO speedM In [M] mode, you can set the ISO speed manually. You can also select ISO Auto. ISO speed range For movie recording, you can set the manual ISO speed setting range (minimum and maximum limits). Max for Auto You can set the maximum limit for ISO Auto in movie recording in [k] mode or in [M] mode with ISO Auto. aMax for Auto You can set the maximum limit for ISO Auto in time-lapse movie recording in [k] mode or in [M] mode with ISO Auto.
Other Menu Functions [z5] zz HDMI information display You can configure information display for image output via an HDMI cable. With info The image, shooting information, AF points, and other information is shown on the other device via HDMI. Note that the camera screen goes off. Recorded movies are saved to the card. Clean / H output HDMI output consists solely of 4K movies. Shooting information and AF points are also displayed on the camera, but no image is recorded to the card.
Other Menu Functions [z6] zz k Auto slow shutter You can choose whether to record movies that are brighter than when set to [Disable] by automatically slowing the shutter speed under low light. Applies when the frame rate of the movie recording size is 8 or 7. Disable Enables you to record movies with smoother, more natural movement, less affected by subject shake than when set to [Enable]. Note that under low light, movies may be darker than when set to [Enable].
General Movie Recording Cautions Red [E] Internal Temperature Warning Icon zz If the camera’s internal temperature increases due to prolonged movie recording or under a high ambient temperature, a red [E] icon will appear. zz The red [E] icon indicates that movie recording will soon be terminated automatically. If this happens, you will not be able to shoot again until the camera’s internal temperature decreases. Turn off the power and let the camera rest for a while.
General Movie Recording Cautions Recording and Image Quality zz If you use a card with a slow writing speed, an indicator may appear on the right of the screen during movie recording. It indicates how much data has not yet been written to the card (remaining capacity of the internal buffer memory). The slower the card, the faster the (1) indicator will climb upward. If the indicator (1) becomes full, movie recording will stop automatically.
Flash Photography This chapter describes how to shoot with the built-in flash or an external flash (EL/EX Speedlites). zz Flash cannot be used while you are recording movies. zz AEB is not available in flash photography.
Shooting With the Built-in Flash Using the built-in flash is recommended when the [I] icon appears on the screen, when subjects in daytime shots are backlit, or when shooting under low light. the lever to raise the 1Use built-in flash. the shutter button halfway. 2zPress z Confirm that a [I] icon appears on the screen. the picture. 3zTake z The built-in flash fires according to [Flash firing] settings (=290).
Shooting With the Built-in Flash Shutter Speed and Aperture Value in Flash Photography Shooting Mode Shutter Speed Aperture Value Auto (1/200–30 sec.)* Automatically set s Manual (1/200–30 sec.) Automatically set f Auto (1/200–30 sec.)* Manually set Manual (1/200–30 sec.) Manually set d 4 * When [Slow synchro] under [z: Flash control] is set to [1/200-30sec. auto]. zz Do not use the built-in flash unless it is fully raised.
Shooting With the Built-in Flash Flash Exposure CompensationM Just as exposure compensation is adjustable, you can also adjust flash output of the built-in flash. 1Press the button. 2Press the button. 3Select [2exp. comp.]. amount. 4zSetz Tothemakecompensation flash exposure brighter, set the compensation amount toward [Brighter] (positive compensation), or to make it darker, set it toward [Darker] (negative compensation).
Shooting With the Built-in Flash zz When [z: Auto Lighting Optimizer] (=149) is set to an option other than [Disable], images may still look bright even if negative compensation is set. zz The exposure compensation amount will remain in effect even after you set the power switch to <2>. zz You can also set flash exposure compensation with [Built-in flash settings] in [z: Flash control] (=292).
Shooting With the Built-in Flash the button (8). 3zPress z Center the subject on the screen, then press the button. zz A preflash is fired by the flash, and the required flash output level is retained. zz [d] blinks. zz Each time you press the button, a preflash is fired, and the flash output required for shooting is retained. the picture. 4zTake z Compose the shot and press the shutter button completely. zz The [D] icon blinks when subjects are too far away and your shots would be dark.
Flash Function Settings Functions of the built-in flash or external EL/EX series Speedlites can be set from menu screens on the camera. Before setting functions of external Speedlites, attach the Speedlite and turn it on. For details on external Speedlite functions, refer to the Speedlite’s instruction manual. 1Select [z: Flash control]. 2Select an item.
Flash Function Settings Flash Firing Set to [a] to have the flash fire automatically, based on shooting conditions. Set to [D] to have the flash always fire when you shoot. Set to [b] to disable flash firing. E-TTL II Flash MeteringM For normal flash exposures, set it to [Evaluative]. If [Average] is set, the flash exposure will be averaged for the entire metered scene. Red-eye Reduction Set to [Enable] to reduce red-eye by emitting the red-eye reduction lamp before firing the flash.
Flash Function Settings Slow SynchroM You can set the flash-sync speed for flash photography in aperture-priority AE mode or Program AE mode. zz [ ] 1/200-30sec. auto zz [ ] 1/200-1/60sec. auto zz [ ] 1/200 sec. (fixed) The flash sync speed is set automatically within a range of 1/200 sec. to 30 sec. to suit the scene’s brightness. Slow-sync shooting is used under some shooting conditions, in low-light locations, and shutter speed is automatically lowered.
Flash Function Settings Built-in Flash Function SettingsM zz Flash mode Set to [E-TTL II] to shoot in E-TTL II/E-TTL fully automatic flash mode. Set to [Manual flash] to specify your preferred flash output manually. Available in , , , and mode.
Flash Function Settings zz Shutter synchronization Normally, set this to [1st curtain] so that the flash fires immediately after the exposure starts. Set to [2nd curtain] and use low shutter speeds for natural-looking shots of subject motion trails, such as car headlights. zz When using second-curtain synchronization, set the shutter speed to 1/80 sec. or slower. If the shutter speed is 1/100 sec. or faster, first-curtain synchronization will be applied automatically even if [2nd curtain] is set.
Flash Function Settings External Flash Function SettingsM The information displayed, position of display, and available options vary depending on the Speedlite model, its Custom Function settings, the flash mode, and other factors. Refer to the instruction manual of your flash unit for details on its functions.
Flash Function Settings zz Flash mode You can select the flash mode to suit your desired flash photography. [E-TTL II] is the standard mode of EL/EX series Speedlites for automatic flash photography. [Manual flash] is for setting the Speedlite’s [Flash output] yourself. [CSP] (continuous shooting priority mode) is available when using a compatible external Speedlite. This mode automatically reduces flash output by one stop and increases ISO speed by one stop.
Flash Function Settings zz Wireless functions You can use radio or optical wireless transmission to shoot with wireless multipleflash lighting. For details on wireless flash, refer to the Instruction Manual of a Speedlite compatible with wireless flash photography. zz Firing ratio control With a macro flash, you can set the firing ratio control. For details on firing ratio control, refer to the macro flash’s Instruction Manual.
Flash Function Settings zz Shutter synchronization Normally, set this to [First-curtain synchronization] so that the flash fires immediately after the exposure starts. Set to [Second-curtain synchronization] and use low shutter speeds for natural-looking shots of subject motion trails, such as car headlights. Set to [High-speed synchronization] for flash photography at higher shutter speeds than the maximum flash sync shutter speed.
Flash Function Settings zz Flash exposure bracketing External Speedlites equipped with flash exposure bracketing (FEB) can change the external flash output automatically as three shots are taken at once. External Flash Custom Function Settings For details on the external Speedlite’s Custom Functions, refer to the Speedlite’s Instruction Manual.
Flash Function Settings Clearing Flash Function Settings/Flash C.Fn SettingsM 1Select [Clear settings]. the settings to be cleared. 2zSelect z Select [Clear built-in flash set.], [Clear external flash set.], or [Clear ext. flash C.Fn set.]. zz On the confirmation dialog, select [OK]. Then the flash settings or Custom Function settings will all be cleared.
Shooting With External Speedlites EL/EX Series Speedlites for EOS Cameras The camera supports flash photography using all functions of EL/EX series Speedlites (sold separately). For operation procedures, refer to the EL/EX series Speedlite’s Instruction Manual. Canon Speedlites Other Than the EL/EX Series zz With an EZ/E/EG/ML/TL-series Speedlite set to A-TTL or TTL autoflash mode, the flash can be fired at full output only.
Playback This chapter covers topics related to playback—playing back captured still photos and movies—and introduces menu settings on the Playback ([x]) tab. zz Normal display or selection on this camera may not be possible for images captured on other cameras, or images from this camera that have been edited or renamed on a computer. zz Images may be displayed that cannot be used with certain playback features.
Tab Menus: Playback zz Playback 1 =323 =326 =327 =331 =335 =338 zz Playback 2 =341 =347 =349 =350 =351 =354 =356 zz Playback 3 =358 =361 =363 =365 zz [3: RAW image processing] and [3: Quick Control RAW processing] are not displayed in Basic Zone modes.
Tab Menus: Playback zz Playback 4 =367 =369 =370 =371 =372 =373 303
Image Playback Single-Image Display back the image. 1zPlay z Press the button. an image. 2zSelect z To play back newer images, press the button, and to play back older images, press the button. zz Each time you press the button, the display will change. No information Basic information display Shooting information display the image playback. 3zExit z Press the button to exit the image playback.
Image Playback Shooting Information Display With the shooting information screen displayed, you can press the button to change the information displayed. You can also customize the information displayed, in [x: Playback information display] (=367).
Image Playback Touch Playback The camera features a touch-screen panel that you can touch to control playback. Supported touch operations are like those used with smartphones and similar devices. First, press the button to prepare for touch playback. Image browsing Jump display Index display Magnified view zz You can also magnify display by double-tapping with one finger.
Magnified Image Display You can magnify your captured images. the image. 1zMagnify z Turn the <5> dial for a magnified view or index display. In magnified view, the position of the magnified area (1) is shown in the lower right of the screen. (1) the image. 2zScroll z Press the cross keys to scroll the image vertically and horizontally.
Index Display (Multiple-Image Display) to the index display. 1zSwitch z During image playback, turn the <5> dial counterclockwise. zz The 4-image index display will appear. The selected image is highlighted with an orange frame. Turning the <5> dial further counterclockwise switches to 9, 36, and 100-image display. Turning the dial the other way switches to 100, 36, 9, 4, and single-image display. B B B B an image. 2zSelect z Press the cross keys to move the orange frame and select the image.
Movie Playback back the image. 1zPlay z Press the button. a movie. 2zSelect z Use the keys to select the movie to play back. zz In the single-image display, the [s1] icon displayed on the upper left indicates a movie. zz In the index display, perforations at the left edge of a thumbnail indicate a movie. As rolls cannot be played back from the index display, press <0> to switch to the single-image display. the single-image display, press 3In<0>.
Movie Playback <0> to play back the 4Press movie. zz The movie will start playing back. zz You can pause playback and display the movie playback panel by pressing <0>. Press it again to resume the playback. zz You can also adjust the volume during movie playback by using the keys.
Movie Playback Movie Playback Panel Item Playback Operations 7 Play Pressing <0> toggles between playback and stop. 8 Slow motion Adjust the slow motion speed with the keys. The slow motion speed is indicated on the upper right of the screen. T Skip backward Skips backward approx. 4 sec. each time you press <0>. 3 Previous frame Displays the previous frame each time you press <0>. Holding <0> down will rewind the movie. 6 Next frame Plays the movie frame-by-frame each time you press <0>.
Movie Playback Movie Playback Panel (Video Snapshot Albums and Digest Movies) Item Playback Operations 7 Play Pressing <0> toggles between playback and stop. 8 Slow motion Adjust the slow motion speed with the keys. The slow motion speed is indicated on the upper right of the screen. T Previous clip Displays the first frame of the previous clip or video snapshot. 3 Previous frame Displays the previous frame each time you press <0>. Holding <0> down will rewind the movie.
Editing a Movie’s First and Last Scenes You can edit out the first and last scenes of a movie in approx. 1-sec. increments. movie playback. 1zPause z The movie playback panel will appear. the movie playback panel, 2On select [X]. the part to be edited out. 3zSpecify z Select either [U] (Cut beginning) or [V] (Cut end). zz Press the keys for frame-byframe playback. zz After deciding which part to edit out, press <0>. The portion indicated by a line at the bottom of the screen will remain.
Editing a Movie’s First and Last Scenes the image. 5zSave z Select [W] (1). (1) (2) zz The save screen will appear. zz To save it as a new roll, select [New file]. To save it and overwrite the original movie file, select [Overwrite]. ] (2) to save a compressed zz Select [ version of the file. 4K movies are converted to Full HD movies before compression. zz On the confirmation dialog, select [OK] to save the edited movie and return to the movie playback screen. zz Because editing is performed in approx.
Frame Extraction From 4K movies or 4K time-lapse movies, you can select individual frames to save as approx. 8.3-megapixel (3840×2160) JPEG still images. This function is called “Frame Grab (4K frame capture)”. back the image. 1zPlay z Press the <3> button. a 4K movie. 2zSelect z Use the keys to select a 4K movie or 4K time-lapse movie. zz On the shooting information screen (=590), 4K movies and 4K time-lapse movies are indicated by an [H] icon.
Frame Extraction [I]. 6zSelect z Use the keys to select [I]. the image. 7zSave z Select [OK] to save the current frame as a JPEG still image. the image to display. 8zSelect z Check the destination folder and image file number. zz Select [View original movie] or [View extracted still image]. zz Frame grabbing is not possible with Full HD movies, Full HD time-lapse movies, HD movies, or with 4K movies or 4K time-lapse movies from a different camera.
Digest Movie Editing Individual chapters (clips) recorded in mode can be erased. Be careful when erasing clips, because they cannot be recovered. the image. 1zDisplay z Press the button. a digest movie. 2zSelect z Use the keys to select the digest movie. zz In single-image display, digest movies are labeled with [sD] in the upper left. zz In index display, press <0> to switch to single-image display. the single-image display, press 3In<0>. [D]. 4zSelect z Digest movie playback begins.
Digest Movie Editing 7Select [L]. [OK], then press <0>. 8zSelect z The clip is erased, and the digest movie is overwritten. zz Video snapshot albums can also be edited. Albums created with [x: Create album] cannot be edited. zz For other instructions on using the movie playback panel for digest movies, see “Movie Playback Panel (Video Snapshot Albums and Digest Movies)” (=312).
Still Photo Extraction from RAW Burst Images You can extract any image (as a JPEG or RAW image) from sets (rolls, =137) captured in RAW burst mode. the image. 1zDisplay z Press the button. a roll. 2zSelect z Use the keys to select a roll file. zz In the single-image display, the [si] icon displayed on the upper left indicates a roll. zz In index display, press <0> to switch to single-image display. the single-image display, press 3In<0>. [i]. 4zSelect z The roll is displayed. an image.
Still Photo Extraction from RAW Burst Images 6Press <0>. and save the image to 7Select extract. zz Use the keys to select [Extract as JPEG] or [Extract as 1]. zz With [Extract as JPEG], you can choose [Edit and save] and apply RAW image processing (=341) before saving. zz Images saved when [Extract as JPEG] is selected are in [73] (18 megapixels) quality. zz Creative filters, cropping, and resizing are not available for JPEGs extracted from RAW burst images or processed from a RAW image.
Playback on a TV Set You can view your shots and movies on a TV by connecting the camera to a TV with an HDMI cable (not exceeding 2.5 m / 8.2 ft., with a Type D terminal on the camera end). If the image does not appear on the TV screen, check if the [5: Video system] is correctly set to [For NTSC] or [For PAL] (depending on the video system of your television). the HDMI cable to the 1Connect camera. zz Insert the HDMI cable in the camera’s terminal. the HDMI cable to the 2Connect television.
Playback on a TV Set zz Adjust movie sound volume with the TV set. The sound volume cannot be adjusted with the camera. zz Before connecting or disconnecting the cable between the camera and television, turn off the camera and television. zz Depending on the television, part of the image displayed may be cut off. zz Do not connect any other device’s output to the camera’s terminal. Doing so may cause a malfunction. zz Certain televisions may not display the images due to incompatibility.
Protect Images You can protect important images from being accidentally erased. Protecting a Single Image 1Select [3: Protect images]. 2Select [Select images]. an image. 3zSelect z Use the keys to select the image to protect. (1) the image. 4zProtect z Press <0> to protect the selected image. The [K] icon (1) will appear at the top of the screen. zz To cancel the image protection, press <0> again. The [K] icon will disappear. zz To protect another image, repeat steps 3 and 4.
Protect Images Specifying the Range of Images to be Protected While looking at the images in the index display, you can specify the first and last images for a range to protect all the specified images at once. [Select range]. 1zSelect z Select [Select range] in [3: Protect images]. the range of images. 2zSpecify z Select the first image (start point). zz Next, select the last image (end point). zz The images in the specified range will be protected and the [J] icon will appear.
Protect Images Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [3: Protect images], all the images in the folder or on the card will be protected. To cancel the selection, select [Unprotect all images in folder] or [Unprotect all images on card].
Rotate Images You can use this feature to rotate the displayed image to the desired orientation. 1Select [3: Rotate image]. an image. 2zSelect z Use the keys to select the image to rotate. the image. 3zRotate z Each time you press <0>, the image will rotate clockwise as follows: 90° → 270° → 0°. zz To rotate another image, repeat steps 2 and 3. zz If you set [5: Auto rotate] to [OnzD] (=489) before taking vertical shots, you need not rotate the image with this function.
Erase Images You can either select and erase unnecessary images one by one or erase them in one batch. Protected images (=323) will not be erased. zz Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them. Erasing a Single Image the image to be erased. 1zSelect z Press the button. zz Use the keys to select the image to erase. 2Press the button. 3Erase the images.
Erase Images Checkmarking [X] Images to Be Erased in a Batch By adding checkmarks to the images to be erased, you can erase all those images at once. 1Select [3: Erase images]. 2Select [Select and erase images]. an image. 3zSelect z Use the keys to select the image to erase, then press <0>. zz To select another image to be erased, repeat step 3. the images. 4zErase z Press the button, then press [OK].
Erase Images Specifying the Range of Images to Be Erased While looking at the images in the index display, you can specify the first and last images for a range to erase all the specified images at once. [Select range]. 1zSelect z Select [Select range] in [3: Erase images]. the range of images. 2zSpecify z Select the first image (start point). zz Next, select the last image (end point). 3Press the button. the images. 4zErase z Select [OK].
Erase Images Erasing All Images in a Folder or on a Card You can erase all the images in a folder or on a card at once. When [3: Erase images] is set to [All images in folder] or [All images on card], all the images in the folder or on the card will be erased. If the search conditions are set with [3: Set image search conditions] (=363), the display will change to [All found images]. If you select [All found images], all the images filtered by the search conditions will be erased.
Print Ordering DPOF (Digital Print Order Format) enables you to print images recorded on the card according to your printing instructions such as the image selection, quantity to print, etc. You can print multiple images in one batch or create a print order for a photofinisher. You can set the print settings such as print type, date imprinting, file number imprinting, etc. The print settings will be applied to all the images specified for printing. (They cannot be set individually for each image.
Print Ordering the setting. 4zExit z Press the button. zz Next, select [Sel.Image] or [Multiple] to specify the images to be printed. zz If you print an image with a large image size using the [Index] or [Both] setting (=331), the index print may not be printed with certain printers. In this case, resize the image (=356), then print the index print. zz Even if [Date] and [File No.] are set to [On], the date or file number may not be imprinted, depending on the print type setting and printer.
Print Ordering Specifying Images for Printing zz Selecting Images Select and specify the images one by one. Press the button to save the print order to the card. zz Standard/Both (1) Press <0> to print a copy of the displayed image. By pressing the keys, you can set the number of copies to be printed up to 99. (2) (1) (2) Quantity Total images selected zz Index Press <0> to add a checkmark to the box [X]. The image will be included in the index print.
Print Ordering All Images in a Folder Select [Mark all in folder] and select the folder. A print order for one copy of all the images in the folder will be specified. If you select [Clear all in folder] and select the folder, the print order for all the images in the folder will be canceled. All Images on a Card If you select [Mark all on card], one copy of all the images on the card will be specified for printing.
Photobook Set-up You can specify up to 998 images to be printed in a photobook. When you use EOS Utility (EOS software) to import images to a computer, the specified images for a photobook will be copied to a dedicated folder. This function is useful for ordering photobooks online. Specifying One Image at a Time 1Select [3: Photobook Set-up]. 2Select [Select images]. the image to be specified. 3zSelect z Use the keys to select an image, then press <0>.
Photobook Set-up Specifying the Image Range for a Photobook While looking at the images in the index display, you can specify the range (start point to end point) of images to be specified for a photobook at once. [Multiple]. 1zSelect z Under [3: Photobook Set-up], select [Multiple]. 2Select [Select range]. the range of images. 3zSpecify z Select the first image (start point). zz Next, select the last image (end point).
Photobook Set-up Specifying All Images in a Folder or on a Card You can specify all the images in a folder or on a card at once for a photobook. Under [x: Photobook Set-up], you can set [Multiple] to [All images in folder] or [All images on card] to specify all the images in the folder or on the card for a photobook. To cancel the selection, select [Clear all in folder] or [Clear all on card].
Creative Filters You can apply the following filter processing to an image and save it as a separate image: Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, Water painting effect, Toy camera effect, and Miniature effect. 1Select [3: Creative filters]. an image. 2zSelect z Use the keys to select images, then press <0>. zz You can turn the <5> dial to select the image using the index display. 3Select a filter effect (=339). the filter effect.
Creative Filters the image. 5zSave z Select [OK]. zz Check the destination folder and image file number displayed, then select [OK]. zz To apply filter processing to other images, repeat steps 2–5. zz For images captured in RAW+JPEG shooting, filter processing is applied to the RAW image, and the results are saved as a JPEG. zz For RAW images captured at a specific aspect ratio, the resulting image is saved at that aspect ratio after filter processing.
Creative Filters zz J Art bold effect Makes the photo look like an oil painting and the subject look more threedimensional. By adjusting the effect, you can change the contrast and saturation. Note that subjects such as the sky or white walls may not be rendered with a smooth gradation and may look irregular or have significant noise. zz K Water painting effect Makes the photo look like a watercolor painting with soft colors. By adjusting the effect, you can change the color density.
RAW Image Processing M You can process 1 or F images with the camera to create JPEG images. RAW images are not affected, so different conditions can be applied to create JPEGs. You can also use Digital Photo Professional (EOS software) to process RAW images. [3: RAW image 1Select processing]. an item, then select images. 2zSelect z You can select multiple images to process at once. Select images zz Use the keys to select images to process, then press <0>. zz Press the button.
RAW Image Processing the desired processing 3Set conditions. Use shot settings zz Images are processed using image settings at the time of capture. Customize RAW processing zz Use the keys to select an item. zz Turn the <6> dial to switch the setting. zz Press <0> to access the function setting screen. zz To return to the image settings at the time of shooting, press the button.
RAW Image Processing the image to display. 5zSelect z Select [Original image] or [Processed img.]. Magnified View You can magnify images displayed for [Customize RAW processing] by turning the <5> dial. Magnification varies depending on the [Image quality] setting. Using cross keys, you can scroll the magnified image vertically and horizontally. To cancel magnified view, turn the <5> dial the other way.
RAW Image Processing RAW Image Processing Options zz [ ] Brightness adjustment zz [ ] White balance (=155) zz [ ] Picture Style (=163) You can adjust the image brightness up to ±1 stop in 1/3-stop increments. You can select the white balance. If you select [Q], you can select [Auto: Ambience priority] or [Auto: White priority]. If you select [P], you can set the color temperature. You can select the Picture Style. You can adjust the sharpness, contrast, and other parameters.
RAW Image Processing zz [ ] Color space (=162) zz [ ] Lens aberration correction You can select either sRGB or Adobe RGB. Since the camera screen is not compatible with Adobe RGB, the difference in the image will hardly be perceptible when either color space is set. [ ] Peripheral illumination correction (=129) [ ] Distortion correction (=129) [ ] Digital Lens Optimizer (=130) A phenomenon that makes the image corners look darker due to the lens characteristics can be corrected.
RAW Image Processing [ ] Chromatic aberration correction (=131) [ ] Diffraction correction (=131) Chromatic aberrations (color fringing along the subject’s outline) due to the lens characteristics can be corrected. If [Enable] is set, the corrected image will be displayed. If the effect is difficult to discern, magnify the image (=307). The diffraction by the lens aperture degrading the image sharpness can be corrected. If [Enable] is set, the corrected image will be displayed.
Creative Assist You can process RAW images by applying your preferred effects and saving as JPEGs. 1Select [3: Creative Assist]. an image. 2zSelect z Use the keys to select images to process, then press <0>. an effect level. 3zSelect z Use the keys to select the effect. zz By selecting [Preset] and pressing <0>, you can choose [VIVID], [SOFT], or other preset effects. [AUTO1], [AUTO2], and [AUTO3] are effects recommended by the camera based on image conditions.
Creative Assist zz You can adjust effects such as [Brightness] or [Contrast] by pressing <0> and then using the keys. zz Press <0> when adjustment is finished. zz To reset the effect, press the button. zz To confirm the effect, press the button. the image. 4zSave z Select [OK].
Quick Control RAW Processing M You can select the type of RAW image processing performed from the Quick Control screen. [3: Quick Control RAW 1Select processing]. an item. 2zSelect z Creative Assist RAW processing that applies your preferred effect (=347). zz RAW image processing RAW processing according to conditions you specify (=341).
Red-Eye Correction Automatically corrects portions of images affected by red-eye from flash. The image can be saved as a separate file. 1Select [3: Red-eye correction]. an image with . 2zSelect z After image selection, either touch [E] or press <0>. zz White frames are displayed around corrected image areas. the image. 3zSave z Select [OK]. zz The image is saved as a separate file. zz Some images may not be corrected accurately.
Create Album You can rearrange, delete, or play back the video snapshots in an album. 1Select [3: Create album]. an album to edit. 2zSelect z Press <0> to add a checkmark [X]. zz After selection, press the button. 3Select [OK]. 4Select an editing option.
Create Album Option Description Use the keys to select a video snapshot to move, T Rearrange video then press <0>. Use the keys to move it, then snapshots press <0>. L Remove video snapshot Use the keys to select a video snapshot to delete, then press <0>. Selected video snapshots are labeled [L]. To clear the selection and remove [L], press <0> again. 7 Play video snapshot Use the keys to select a video snapshot to play, then press <0>.
Create Album Selection of Background Music Albums and slideshows can be played with background music once you copy the music to the card, using EOS Utility (EOS software). [Background music]. 1zSelect z Set [Background music] to [On]. the background music. 2zSelect z Use the keys to select the music, then press <0>. For [Slide show], you can select multiple tracks. to a sample. 3zListen z To listen to a sample, press the button. zz Use the keys to adjust the volume.
Cropping You can crop a captured JPEG image and save it as another image. Cropping an image is possible only with JPEG images. Images shot in RAW cannot be cropped. 1Select [x: Cropping]. an image. 2zSelect z Use the keys to select the image to crop. the cropping frame. 3zSetz Press <0> to display the cropping frame. zz The image area within the cropping frame will be cropped. zz Changing the Cropping Frame Size Turn the <5> dial to change the cropping frame size.
Cropping zz Moving the Cropping Frame Press the cross keys to move the frame vertically or horizontally. Move the cropping frame until it covers the desired image area. zz Correcting the Tilt You can correct image tilt by ±10°. Turn the <5> dial to select [c], then press <0>. While checking the tilt against the grid, turn the <5> dial (in 0.1° increments) or tap the left or right wedge (in 0.5° increments) on the upper left of the screen to correct the tilt.
Resizing You can resize a JPEG image to make the pixel count lower and save it as a new image. Resizing an image is possible only with JPEG 3, 4, and a images. JPEG b and RAW images cannot be resized. 1Select [3: Resize]. an image. 2zSelect z Use the keys to select the image to resize. the desired image size. 3zSelect z Press <0> to display the image sizes. zz Select the desired image size (1).
Resizing the image. 4zSave z Select [OK] to save the resized image. zz Check the destination folder and image file number, then select [OK]. zz To resize another image, repeat steps 2 to 4. zz For details on image sizes of resized images, see =582.
Rating You can rate images on a scale of 1–5 (l/m/n/o/p). This function is called rating. * Rating images can help you organize them. Rating a Single Image 1Select [3: Rating]. 2Select [Select images]. the image to be rated. 3zSelect z Use the keys to select the image to rate. the image. 4zRate z Press <0>, and a blue highlight frame will appear as shown in the screen shown on the left. zz Use the keys to select a rating mark, then press <0>.
Rating Rating by Specifying the Range While looking at the images in the index display, you can specify the first and last images for a range to rate all the specified images at once. [Select range]. 1zSelect z Select [Select range] in [3: Rating]. the range of images. 2zSpecify z Select the first image (start point). zz Next, select the last image (end point). zz A checkmark [X] will be appended to all the images within the range between first and last images. 3Press the button. the image.
Rating Rating All Images in a Folder or on a Card You can rate all the images in a folder or on a card at once. Under [3: Rating], when you select [All images in folder] or [All images on card], all the images in the folder or on the card will be rated. Turn the <6> dial to select a rating, then select [OK]. When you are not rating images or cancelling the rating, select [OFF]. If the search conditions are set with [3: Set image search conditions] (=363), the display will change to [All found images].
Slideshows You can play back the images on the card as an automatic slide show. the images to be played 1Specify back. zz To play back all the images on the card, go to step 2. zz If you want to specify the images to be played back in the slide show, filter the images with [3: Set image search conditions] (=363). 2Select [3: Slide show]. the playback as desired. 3zSetz Select [Set up].
Slideshows Display time Repeat Transition effect Background music the slide show. 4zStart z Select [Start]. After [Loading image...] is displayed, the slide show will start. the slide show. 5zExit z To exit the slide show and return to the setting screen, press the button. zz To pause the slide show, press <0>. During pause, [G] will be displayed on the upper left of the image. Press <0> again to resume the slide show.
Set Image Search Conditions You can filter image display according to your search conditions. After setting the image search conditions, you can play back and display only the found images. You can also protect, rate, erase, play a slide show, and apply other operations to filtered images. [3: Set image search 1Select conditions]. conditions. 2zSetz Usethethesearch keys to select an item. zz Use the keys to set the setting. A checkmark [X] (1) is appended to the left of the item.
Set Image Search Conditions the search conditions. 3zApply z Press <0> and read the message displayed. zz Select [OK]. zz The search condition is specified. the found images. 4zDisplay z Press the <3> button. (2) zz Only the images that match the set conditions (filtered) will be played back. zz When the images are filtered for display, the screen will have an outer yellow frame (2). Clearing the Search Conditions Access the screen in step 2, then press the button to remove all the checkmarks [X].
Main Dial Browsing In the single-image display, you can turn the <6> dial to jump through the images forward or backward according to the jump method set. 1Select [x: Image jump w/6]. 2Select the jump method. zz With [Jump images by the specified number], you can turn the <6> dial to select the number of images to jump by. zz When you select [Display by image rating], turn the <6> dial to specify the rating (=358). If you browse images with 9 selected, all the rated images will be displayed.
Main Dial Browsing by jumping. 3zBrowse z Press the button. zz In the single-image display, turn the <6> dial. zz You can browse by the set method. (1) (2) (1) (2) Jump method Playback position zz To search images by shooting date, select [g: Date]. zz To search images by folder, select [h: Folder]. zz If the card contains both movies and still photos, select [i: Movies] or [j: Stills] to display one or the other.
Playback Information Display You can specify screens and accompanying information displayed during image playback. [3: Playback information 1Select display]. a checkmark [X] next to the 2Add number of screens to display. zz Use the keys to select a number. zz Press <0> to add a checkmark [X]. zz Repeat these steps to add a checkmark [X] to the number of each screen to display, then select [OK]. zz Your selected information can be accessed by pressing the button during playback.
Playback Information Display zz [Brightness] display This histogram is a graph showing the distribution of the image’s brightness level. The horizontal axis indicates the brightness level (darker on the left and brighter on the right) while the vertical axis indicates how many pixels exist for each brightness level. The more pixels there are toward the left, the darker the image. The more pixels there are toward the right, the brighter the image.
Highlight Alert You can specify blinking display of overexposed highlights on the playback screen. To obtain more detailed gradation in the blinking areas where you want the gradation to be faithfully reproduced, set the exposure compensation to a negative amount and shoot again for a better result. 1Select [3: Highlight alert]. 2Select [Enable].
AF Point Display You can display the AF points that were used to focus, which will be outlined in red on the playback screen. If automatic AF point selection is set, multiple AF points may be displayed. 1Select [3: AF point disp.]. 2Select [Enable].
Playback Grid You can display a grid over still photos shown in single-image display on the playback screen. This function is convenient for checking the image’s vertical or horizontal tilt as well as composition. 1Select [3: Playback grid]. 2Select an item.
View from Last Seen You can specify which image is displayed first when you start image playback. 1Select [3: View from last seen]. an item. 2zSelect z [Enable]: Playback resumes from the last image displayed (except when you have just finished shooting). zz [Disable]: Playback resumes from your most recent shot whenever the camera is restarted.
Magnification (Approx.) You can set the initial magnification ratio and position for the magnified view. 1Select [3: Magnificatn (apx)]. 2Select an item. zz 2x, 4x, 8x, 10x (magnify from center) The magnified view starts at the image center at the selected magnification. zz Actual size (from selected point) The recorded image’s pixels will be displayed at approx. 100%. The magnified view starts at the AF point that achieved focus.
Wireless Features This chapter describes how to connect the camera to a smartphone wirelessly via Bluetooth® or Wi-Fi® and send images to devices or Web services, how to control the camera from a computer or wireless remote control, and other operations. Important Note that Canon cannot be held liable for any loss or damage from erroneous wireless communication settings when using the camera. In addition, Canon cannot be held liable for any other loss or damage caused by use of the camera.
Tab Menus: Wireless Tab zz Wireless 1 =377 =452 =453 =454 =455 =460 zz Wireless communication is not available while the camera is connected via an interface cable to a computer or other device. zz Other devices, such as computers, cannot be used with the camera by connecting them with an interface cable while the camera is connected to devices via Wi-Fi. zz The camera cannot be connected via Wi-Fi if there is no card in the camera (except for [D]).
Selection of Wi-Fi/Bluetooth Connection [k: Wi-Fi/Bluetooth 1Select connection]. an item for the camera to 2Select connect to. q Connect to smartphone (=379) Control the camera remotely and browse images on the camera over a Wi-Fi connection by using the dedicated Camera Connect app on smartphones or tablets (collectively referred to as “smartphones” in this manual).
Selection of Wi-Fi/Bluetooth Connection R Upload to Web service (=426) Share images with friends or family on social media or the CANON iMAGE GATEWAY online photo service for Canon customers after you complete member registration (free of charge). K Connect to Wireless Remote (=446) This camera can also be connected to Wireless Remote Control BR-E1 (sold separately) via Bluetooth for remote control shooting.
Connecting to a Smartphone You can do the following after pairing the camera with a smartphone compatible with Bluetooth low energy technology (hereafter, “Bluetooth”). zz Establish a Wi-Fi connection using only the smartphone (=381). zz Establish a Wi-Fi connection with the camera even when it is off (=387). zz Geotag images with GPS information acquired by the smartphone (=455). zz Control the camera remotely from a smartphone (=386).
Connecting to a Smartphone Installing Camera Connect on a Smartphone The dedicated app Camera Connect (free of charge) must be installed on the smartphone on which Android or iOS is installed. zz Use the latest version of the smartphone OS. zz Camera Connect can be installed from Google Play or App Store. Google Play or App Store can also be accessed using the QR codes that appear when the camera is paired or connected via Wi-Fi to a smartphone.
Connecting to a Smartphone Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Steps on the Camera (1) [k: Wi-Fi/Bluetooth 1Select connection]. 2Select [qConnect to smartphone]. 3Select [Add a device to connect to].
Connecting to a Smartphone an item. 4zSelect z If Camera Connect is already installed, select [Do not display]. zz If Camera Connect is not installed, select [Android] or [iOS], scan the displayed QR code with the smartphone to access Google Play or App Store and install Camera Connect. [Pair via Bluetooth]. 5zSelect z Pairing now begins. zz To pair with a different smartphone after pairing with one initially, select [OK] on the screen at left.
Connecting to a Smartphone Steps on the Smartphone (1) 6Start Camera Connect. the camera for pairing. 7zTapz If you are using an Android smartphone, go to step 9. 8Tap on [Pair] (iOS only). Steps on the Camera (2) 9Select [OK].
Connecting to a Smartphone <0>. 10 zPress z Pairing is now complete, and the camera is connected to the smartphone via Bluetooth. A Bluetooth icon appears on the main Camera Connect screen. zz The camera cannot be connected to two or more devices at the same time via Bluetooth. To switch to a different smartphone for the Bluetooth connection, see =458. zz Bluetooth connection consumes battery power even after the camera’s auto power off is activated.
Connecting to a Smartphone Steps on the Smartphone (2) Connect function. 11 zTapz In oniOS,a tapCamera [Join] when a message is displayed to confirm camera connection. zz For the Camera Connect functions, see =386. zz When a Wi-Fi connection is established, the screen for the selected function will appear. zz [qWi-Fi on] is displayed on the camera. zz The Bluetooth and Wi-Fi icons are lit on the main Camera Connect screen. The Wi-Fi connection to a Bluetooth-compatible smartphone is now complete.
Connecting to a Smartphone [qWi-Fi on] Screen Disconnect,exit zz Terminates the Wi-Fi connection. Confirm set. zz You can check the settings. Error details zz When a Wi-Fi connection error occurs, you can check the details of the error. Camera Connect Functions Images on camera zz Images can be browsed, deleted, or rated. zz Images can be saved on a smartphone. Remote live view shooting zz Enables remote shooting as you view a live image on the smartphone.
Connecting to a Smartphone Maintaining a Wi-Fi Connection When the Camera Is Off Even when the camera power switch is set to <2>, as long as it is paired to a smartphone via Bluetooth, you can use the smartphone to connect via Wi-Fi. 1Select [k: Bluetooth settings]. 2Set [Stay conn. if off] to [Enable]. zz With the camera power switch set to <2>, tap [Images on camera] in the Camera Connect menu to start the Wi-Fi connection.
Connecting to a Smartphone zz You can use Camera Connect to save images to the smartphone, and you can delete images on the camera. zz To terminate the Wi-Fi connection, tap on [ ] on the main Camera Connect screen (=403). zz This function can no longer be used if the wireless settings are reset or the smartphone connection information is erased. Canceling the Pairing Cancel pairing with a smartphone as follows. [k: Wi-Fi/Bluetooth 1Select connection]. [qConnect to smartphone].
Connecting to a Smartphone the smartphone to cancel 4Select paring with. zz Smartphones currently paired with the camera are labeled [s]. [Delete connection 5Select information]. 6Select [OK]. the camera information on 7Clear the smartphone. zz In the smartphone’s Bluetooth setting menu, clear the camera information registered on the smartphone.
Connecting to a Smartphone Wi-Fi Connection Without Using Bluetooth Steps on the Camera (1) [k: Wi-Fi/Bluetooth 1Select connection]. [qConnect to smartphone]. 2zSelect z If the history (=449) is displayed, switch the screen with the keys. 3Select [Add a device to connect to]. an item. 4zSelect z If Camera Connect is already installed, select [Do not display].
Connecting to a Smartphone 5Select [Connect via Wi-Fi]. (1) the SSID (network name) 6Check and password. zz Check the SSID (1) and password (2) displayed on the camera screen. zz In [Wi-Fi settings], if you set [Password] to [None], the password will not be displayed or required (=452). (2) zz By selecting [Switch network] in step 6, you can establish a Wi-Fi connection via an access point (=441).
Connecting to a Smartphone Steps on the Smartphone Smartphone’s screen (sample) the smartphone to 7Operate establish a Wi-Fi connection. zz Activate the smartphone’s Wi-Fi function, then tap the SSID (network name) checked in step 6. zz For the password, enter the password checked in step 6. Camera Connect and tap the 8Start camera to connect to via Wi-Fi. Steps on the Camera (2) [OK]. 9zSelect z To specify viewable images, press the button. See step 5 on =405 to set them.
Connecting to a Smartphone zz The main window of Camera Connect will be displayed on the smartphone. The Wi-Fi connection to a smartphone is now complete. zz Operate the camera using Camera Connect (=386). zz For how to terminate the Wi-Fi connection, see “Terminating Wi-Fi Connections” (=403). zz To reconnect via Wi-Fi, see “Reconnecting via Wi-Fi” (=449). zz When connected via Wi-Fi, you can send images to a smartphone from the Quick Control screen during playback (=395).
Connecting to a Smartphone Automatic Image Transfer as You Shoot Your shots can be automatically sent to a smartphone. Before following these steps, make sure the camera and smartphone are connected via Wi-Fi. 1Select [k: Wi-Fi settings]. [Send to smartphone after 2Select shot]. 3In [Auto send], select [Enable]. 4Set [Size to send]. 5Take the picture.
Connecting to a Smartphone Sending Images to a Smartphone from the Camera You can use the camera to send images to a smartphone paired via Bluetooth (Android devices only) or connected via Wi-Fi. 1Play back the image. 2Press the button. [qSend images to 3Select smartphone]. zz If you perform this step while connected via Bluetooth, a message is displayed, and the connection switches to a Wi-Fi connection. sending options and send 4Select the images.
Connecting to a Smartphone (1) Sending Images Individually an image to send. 1zSelect z Use the keys to select images to send, then press <0>. zz You can turn the <5> dial counterclockwise to select images from index display. [Send img shown]. 2zSelect z In [Size to send], you can select the image sending size. zz When sending movies, you can select the image quality of movies to send in [Quality to send]. (2) Sending Multiple Selected Images 1Press <0>. 2Select [Send selected].
Connecting to a Smartphone images to send. 3zSelect z Use the keys to select images to send, then press <0>. zz You can turn the <5> dial counterclockwise to select images from index display. To return to single-image display, turn the <5> dial clockwise. zz After selecting the images to send, press the button. image selection. 4zExit z Select [OK]. [Size to send]. 5zSelect z On the displayed screen, select an image size.
Connecting to a Smartphone 6Select [Send]. (3) Sending a Specified Range of Images 1Press <0>. 2Select [Send range]. the range of images. 3zSpecify z Select the first image (start point). zz Select the last image (end point). zz To cancel the selection, repeat this step. zz You can turn the <5> dial either way to change the number of images in index display.
Connecting to a Smartphone the range. 4zConfirm z Press the button. image selection. 5zExit z Select [OK]. [Size to send]. 6zSelect z On the displayed screen, select an image size. zz When sending movies, select the image quality in [Quality to send]. 7Select [Send].
Connecting to a Smartphone (4) Sending All Images on the Card 1Press <0>. 2Select [Send all card]. [Size to send]. 3zSelect z On the displayed screen, select an image size. zz When sending movies, select the image quality in [Quality to send]. 4Select [Send].
Connecting to a Smartphone (5) Sending Images that Match the Search Conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For [Set image search conditions], refer to “Set Image Search Conditions” (=363). 1Press <0>. 2Select [Send all found]. [Size to send]. 3zSelect z On the displayed screen, select an image size. zz When sending movies, select the image quality in [Quality to send]. 4Select [Send].
Connecting to a Smartphone Ending Image Transfer Sending Images from the Camera When Paired via Bluetooth (Android) zz Press the button on the image transfer screen. zz Select [OK] on the screen on the left to end image transfer and the Wi-Fi connection. Sending Images from the Camera over a Wi-Fi Connection zz Press the button on the image transfer screen. zz For instructions on disconnecting from Wi-Fi, see “Terminating Wi-Fi Connections” (=403).
Connecting to a Smartphone zz During the image transfer operation, a picture cannot be taken even if the camera’s shutter button is pressed. zz You can cancel the image transfer by selecting [Cancel] during the transfer. zz You can select up to 999 files at a time. zz With a Wi-Fi connection established, disabling the smartphone’s power saving function is recommended. zz Selecting the reduced size for still photos applies to all still photos sent at that time. Note that b size still photos are not reduced.
Connecting to a Smartphone Settings to Make Images Viewable from Smartphones Images can be specified after the Wi-Fi connection is terminated. [k: Wi-Fi/Bluetooth 1Select connection]. [qConnect to smartphone]. 2zSelect z If the history (=449) is displayed, switch the screen with the keys. 3Select [Edit/delete device]. a smartphone. 4zSelect z Select the name of the smartphone on which you want to make the images viewable.
Connecting to a Smartphone 5Select [Viewable imgs]. an item. 6zSelect z Select [OK] to access the setting screen. [All images] All images stored on the card become viewable. [Images from past days] Specify viewable images on the shootingdate basis. Images shot up to nine days ago can be specified. zz When [Images shot in past days] is selected, images shot up to the specified number of days before the current date become viewable.
Connecting to a Smartphone [Select by rating] Specify viewable images depending on whether a rating is appended (or not appended) or by the type of rating. zz Once you select the type of rating, the viewable images are set. [File number range] (Select range) (1) 406 (2) Select the first and last images from images arranged by the file number to specify the viewable images. 1. Press <0> to display the image selection screen. Use the keys to select the image.
Connecting to a Smartphone zz If the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur. yyAny movie recording in progress in movie recording mode will continue. yyAny movie recording in progress in still photo shooting mode will end. zz With a Wi-Fi connection to a smartphone established, certain functions are unavailable. zz In remote shooting, the AF speed may become slower.
Connecting to a Computer via Wi-Fi This section describes how to connect the camera to a computer via Wi-Fi and perform camera operations using EOS software or other dedicated software. Install the latest version of software on the computer before setting up a Wi-Fi connection. For computer operating instructions, refer to the computer user manual.
Connecting to a Computer via Wi-Fi (1) the SSID (network name) 4Check and password. zz Check the SSID (1) and password (2) displayed on the camera screen. zz In [Wi-Fi settings], if you set [Password] to [None], the password will not be displayed or required. For details, see =452. (2) Steps on the Computer (1) Computer’s screen (sample) the SSID, then enter the 5Select password. zz On the computer’s network setting screen, select the SSID checked in step 4.
Connecting to a Computer via Wi-Fi Steps on the Camera (2) [OK]. 6zSelect z The following message is displayed. “******” represents the last six digits of the MAC address of the camera to be connected. Steps on the Computer (2) 7Start EOS Utility. EOS Utility, click [Pairing over 8InWi-Fi/LAN]. zz If a firewall-related message is displayed, select [Yes]. [Connect]. 9zClick z Select the camera to connect to, then click [Connect].
Connecting to a Computer via Wi-Fi Steps on the Camera (3) a Wi-Fi connection. 10 zEstablish z Select [OK]. [DWi-Fi on] Screen Disconnect,exit zz Terminates the Wi-Fi connection. Confirm set. zz You can check the settings. Error details zz When a Wi-Fi connection error occurs, you can check the details of the error. The Wi-Fi connection to a computer is now complete. zz Operate the camera using EOS Utility on the computer. zz To reconnect via Wi-Fi, see “Reconnecting via Wi-Fi” (=449).
Connecting to a Computer via Wi-Fi zz zz If the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur. yyAny movie recording in progress in movie recording mode will continue. yyAny movie recording in progress in still photo shooting mode will end. zz Shooting operations using the camera are not possible after you use EOS Utility to switch from still photo shooting mode to movie recording mode.
Connecting to a Computer via Wi-Fi Sending Images on the Camera Automatically With the dedicated software Image Transfer Utility 2, you can send images on the camera to a computer automatically. Steps on the Computer (1) the computer and access 1Connect point and start Image Transfer Utility 2. zz The screen to set up pairing is shown when you follow the instructions displayed the first time Image Transfer Utility 2 starts up. Steps on the Camera (1) [Auto send images to 2Select computer].
Connecting to a Computer via Wi-Fi 4Select [OK]. to an access point via 5Connect Wi-Fi. zz Establish a Wi-Fi connection between the camera and the access point connected to the computer. For connection instructions, see “Wi-Fi Connection via Access Points” (=441). the computer to pair the 6Select camera with. Steps on the Computer (2) the camera and computer. 7zPair z Select the camera, then click [Pairing].
Connecting to a Computer via Wi-Fi Steps on the Camera (2) [Auto send images to 8Select computer]. zz Select [k: Wi-Fi settings]. zz Select [Auto send images to computer]. 9Select [Image sending options]. what to send. 10 zSelect z If you select [Selected imgs] in [Range to send], specify the images to send on the [Select images to send] screen. zz After the settings are complete, turn the camera off.
Connecting to a Printer via Wi-Fi This section describes how to print images by directly connecting the camera to a printer supporting PictBridge (Wireless LAN) via Wi-Fi. For printer operating instructions, refer to the printer user manual. [k: Wi-Fi/Bluetooth 1Select connection]. [lPrint from Wi-Fi printer]. 2zSelect z If the history (=449) is displayed, switch the screen with the keys. 3Select [Add a device to connect to].
Connecting to a Printer via Wi-Fi (1) the SSID (network name) 4Check and password. zz Check the SSID (1) and password (2) displayed on the camera screen. zz In [Wi-Fi settings], if you set [Password] to [None], the password will not be displayed or required (=452). (2) 5zSetz OnupthetheWi-Fiprinter. settings menu of the printer to be used, select the SSID you have checked. zz For the password, enter the password checked in step 4. the printer.
Connecting to a Printer via Wi-Fi Image Printing Printing Images Individually the image to be printed. 1zSelect z Use the keys to select images to print, then press <0>. zz You can turn the <5> dial counterclockwise to select images from index display. 2Select [Print image]. the image. 3zPrint z For the print setting procedures, see =421. zz Select [Print], then [OK] to start printing.
Connecting to a Printer via Wi-Fi Printing According to Specified Image Options 1Press <0>. 2Select [Print order]. options. 3zSetz Forthetheprinting print setting procedures, see “Print Ordering” (=331). zz If the print order is complete before establishing a Wi-Fi connection, go to step 4. [Print]. 4zSelect z [Print] can be selected only when an image is selected and the printer is ready to print. 5Set the [Paper settings] (=421).
Connecting to a Printer via Wi-Fi the image. 6zPrint z When [OK] is selected, printing starts. zz Shooting is not possible while connected to a printer via Wi-Fi. zz Movies cannot be printed. zz Before printing, be sure to set the paper size. zz Certain printers may not be able to imprint the file number. zz If [Bordered] is set, certain printers may imprint the date on the border. zz Depending on the printer, the date may appear faint if it is imprinted on a bright background or on the border.
Connecting to a Printer via Wi-Fi Print Settings The screen display and setting options vary depending on the printer. Also, certain settings may not be available. For details, refer to the printer’s instruction manual. Print setting screen (1) (2) (3) (4) (5) (6) (8) (1) (2) (3) (4) (5) (6) (7) (8) (7) Sets date or file number printing (=423). Sets the printing effects (=423). Sets the number of copies to print (=423). Sets the print area (=424). Sets the paper size, type, and layout (=422).
Connecting to a Printer via Wi-Fi Paper Settings zz Select [Paper settings]. [Q] Setting the Paper Size zz Select the size of the paper in the printer. [Y] Setting the Paper Type zz Select the type of the paper in the printer. [U] Setting the Page Layout zz Select the page layout. zz If the image’s aspect ratio is different from the printing paper’s aspect ratio, the image may be cropped significantly when you print it as a borderless print. Images may also be printed at lower resolution.
Connecting to a Printer via Wi-Fi [I] Setting the Date/File Number Imprinting zz Select [I]. zz Select what to print. [E] Setting the Printing Effects (Image Optimization) zz Select [E]. zz Select printing effects. zz If you imprint shooting information on an image shot at an expanded ISO speed (H), the correct ISO speed may not be imprinted. zz The [Default] setting for printing effects and other options are the printer’s own default settings as set by the printer’s manufacturer.
Connecting to a Printer via Wi-Fi Cropping the Image Set cropping immediately before printing. Changing other print settings after you crop images may require you to crop the images again. 1On the print setting screen, select [Cropping]. cropping frame size, position, and aspect ratio. 2zSetz Thetheimage area within the cropping frame will be printed. The shape of the frame (aspect ratio) can be changed with [Paper settings].
Connecting to a Printer via Wi-Fi zz Depending on the printer, the cropped image area may not be printed as you specified. zz The smaller the cropping frame, the lower the resolution at which images are printed. Handling Printer Errors zz If printing does not resume after you resolve a printer error (no ink, no paper, etc.) and select [Continue], operate the buttons on the printer. For details on resuming printing, refer to the printer’s instruction manual.
Sending Images to a Web Service This section describes how to use Web services to send images. Registering Web Services Use a smartphone or computer to add your Web services to the camera. zz A smartphone or computer with a browser and Internet connection is required to complete camera settings for CANON iMAGE GATEWAY and other Web services.
Sending Images to a Web Service Registering CANON iMAGE GATEWAY Link the camera and CANON iMAGE GATEWAY by adding CANON iMAGE GATEWAY as a destination Web service on the camera. You will need to enter an email address used on your computer or smartphone. Steps on the Camera (1) [k: Wi-Fi/Bluetooth 1Select connection]. 2Select [RUpload to Web service]. 3Select [I Agree]. a Wi-Fi connection. 4zEstablish z Connect to an access point via Wi-Fi. Go to step 7 on =442.
Sending Images to a Web Service your email address. 5zEnter z Enter your email address, then select [OK]. a four-digit number. 6zEnter z Enter a four-digit number of your choice, then select [OK]. [OK]. 7zSelect z The [R] icon changes to [ 428 ].
Sending Images to a Web Service Steps on the Computer or Smartphone up camera web link. 8zSetz Access the page in the notification message. zz Follow the instructions to complete the settings on the camera web link settings page. Steps on the Camera (2) CANON iMAGE GATEWAY as a 9Add destination. zz Select [ ]. CANON iMAGE GATEWAY is now added.
Sending Images to a Web Service Registering Other Web Services Steps on the Computer or Smartphone the Web service you 1Configure want to use. zz Visit the CANON iMAGE GATEWAY website and access the camera web link settings page. zz Follow the on-screen instructions to complete settings for Web services you want to use. Steps on the Camera the Web service you 2Add configured as a destination. zz Select [k: Wi-Fi/Bluetooth connection]. zz Select [ ].
Sending Images to a Web Service Sending Images You can share images with your family and friends by sending images from the camera to a Web service registered on the camera or by sending Web links of the online albums. Connecting to Web Services via Wi-Fi [k: Wi-Fi/Bluetooth 1Select connection]. a Web service. 2zSelect z If the history (=449) is displayed, switch the screen with the keys.
Sending Images to a Web Service Sending Images Individually an image to send. 1zSelect z Use the keys to select images to send, then press <0>. zz You can turn the <5> dial counterclockwise to select images from index display. [Send img shown]. 2zSelect z In [Size to send], you can select the image sending size. zz On the screen after images are sent, select [OK] to end the Wi-Fi connection. zz When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree].
Sending Images to a Web Service Sending Multiple Selected Images 1Press <0>. 2Select [Send selected]. images to send. 3zSelect z Use the keys to select images to send, then press <0>. zz You can turn the <5> dial counterclockwise to switch to threeimage display for image selection. To return to single-image display, turn the <5> dial clockwise. zz After selecting the images to send, press the button.
Sending Images to a Web Service [Size to send]. 4zSelect z When YouTube is selected as the destination, [Size to send] is not displayed. zz On the displayed screen, select an image size. [Send]. 5zSelect z On the screen after images are sent, select [OK] to end the Wi-Fi connection. zz When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree]. zz To scroll the screen, use the keys.
Sending Images to a Web Service Sending a Specified Range of Images Specify the range of images to send all the images in the range at once. 1Press <0>. 2Select [Send range]. the range of images. 3zSpecify z Select the first image (start point). zz Select the last image (end point). Images will be selected and [X] will appear. zz To cancel the selection, repeat this step. zz You can turn the <5> dial to change the number of images shown in the index display. the range.
Sending Images to a Web Service [Size to send]. 5zSelect z On the displayed screen, select an image size. [Send]. 6zSelect z On the screen after images are sent, select [OK] to end the Wi-Fi connection. zz When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree]. zz To scroll the screen, use the keys.
Sending Images to a Web Service Sending All Images on the Card 1Press <0>. 2Select [Send all card]. [Size to send]. 3zSelect z On the displayed screen, select an image size. [Send]. 4zSelect z On the screen after images are sent, select [OK] to end the Wi-Fi connection. zz When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree]. zz To scroll the screen, use the keys.
Sending Images to a Web Service Sending Images that Match the Search Conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For [Set image search conditions], refer to “Set Image Search Conditions” (=363). 1Press <0>. 2Select [Send all found]. [Size to send]. 3zSelect z On the displayed screen, select an image size.
Sending Images to a Web Service [Send]. 4zSelect z On the screen after images are sent, select [OK] to end the Wi-Fi connection. zz When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree]. zz To scroll the screen, use the keys.
Sending Images to a Web Service zz With a Wi-Fi connection to a Web service established, a picture cannot be taken even if the camera’s shutter button is pressed. zz When sending an image to a Web service other than CANON iMAGE GATEWAY, a send error message may not be displayed even if the image has not been sent to the Web service successfully. Since such send errors can be checked on the CANON iMAGE GATEWAY site, check the error content, then try sending the image again.
Wi-Fi Connection via Access Points This section describes how to join a Wi-Fi network via an access point compatible with WPS (PBC mode). First, check the position of the WPS button and how long to press it. It may take approx. one minute to establish a Wi-Fi connection. [k: Wi-Fi/Bluetooth 1Select connection]. an item. 2zSelect z If the history (=449) is displayed, switch the screen with the keys. 3Select [Add a device to connect to].
Wi-Fi Connection via Access Points [Switch network]. 4zSelect z Displayed when [q], [D], or [l] is selected. 5Select [Connect with WPS]. zz For [Camera access point mode] displayed in step 5, see =444. [WPS (PBC mode)]. 6zSelect z Select [OK]. to the access point via 7Connect Wi-Fi. zz Press the access point’s WPS button. zz Select [OK].
Wi-Fi Connection via Access Points [Auto setting]. 8zSelect z Select [OK] to access the setting screen for the Wi-Fi function. zz If an error occurs with [Auto setting], see =444. the settings for the Wi-Fi 9Specify function. [qConnect to smartphone] zz On the smartphone’s Wi-Fi setting screen, tap the SSID (network name) shown on the camera, then enter the password of the access point for the connection. Go to step 8 on =392. [DRemote control (EOS Utility)] Go to step 7 or 8 on =410.
Wi-Fi Connection via Access Points Send To Screen A screen to select a destination may be displayed depending on the Web service. To register destinations or to specify the settings, you must use a computer. For more information, refer to the EOS Utility Instruction Manual. zz The [Send to] screen may be displayed. zz Select the destination from the list of registered destinations. zz The procedures for setting up a connection and sending images are the same as those for other Web services.
Wi-Fi Connection via Access Points an item. 2zSelect z Select an item to access the screen for numerical input. zz To use a gateway, select [Enable], then select [Address]. the desired values. 3zEnter z Turn the <6> dial to move the input position in the upper area and use the keys to select the number. Press <0> to enter the selected number. zz To set the entered values and return to the screen for step 2, select [OK]. [OK].
Connecting to a Wireless Remote Control This camera can also be connected to Wireless Remote Control BR-E1 (sold separately) via Bluetooth for remote control shooting (=223). [k: Wi-Fi/Bluetooth 1Select connection]. [KConnect to Wireless 2Select Remote]. 3Select [Add a device to connect to]. the devices. 4zPair z When the [Pairing] screen appears, press and hold the and buttons on the BR-E1 simultaneously for at least 3 sec.
Connecting to a Wireless Remote Control up the camera for remote 5Set shooting. zz When shooting still photos, select [Q] or [k] as the drive mode (=135). zz When recording movies, set [z: Remote control] to [Enable]. zz For instructions after the pairing is complete, refer to the BR-E1’s Instruction Manual. zz Bluetooth connections consume battery power even after the camera’s auto power off is activated.
Connecting to a Wireless Remote Control Canceling the Pairing Before pairing with a different BR-E1, clear the information about the connected remote control. [k: Wi-Fi/Bluetooth 1Select connection]. [KConnect to Wireless 2Select Remote]. [Delete connection 3Select information]. 4Select [OK].
Reconnecting via Wi-Fi Follow these steps to reconnect to devices or Web services with registered connection settings. [k: Wi-Fi/Bluetooth 1Select connection]. an item. 2zSelect z Select the item to connect to via Wi-Fi from the displayed history. If the item is not displayed, use the keys to switch screens. zz If [Connection history] is set to [Hide], the history will not be displayed (=452). the connected device. 3Operate [q] Smartphone zz Start Camera Connect.
Reconnecting via Wi-Fi [D] Computer zz On the computer, start the EOS software. zz If the computer’s connection destination has been changed, restore the setting to connect via Wi-Fi to the camera or the same access point as the camera. When directly connecting the camera to a computer via Wi-Fi, “_Canon0A” is displayed at the end of the SSID.
Registering Multiple Connection Settings You can register up to 10 connection settings for the wireless communication functions. [k: Wi-Fi/Bluetooth 1Select connection]. an item. 2zSelect z If the history (=449) is displayed, switch the screen with the keys. zz For details on [qConnect to smartphone], see “Connecting to a Smartphone” (=379). zz For details on [DRemote control (EOS Utility)], see “Connecting to a Computer via Wi-Fi” (=408).
Wi-Fi Settings 1Select [k: Wi-Fi settings]. 2Select an item. zz Wi-Fi When the use of electronic devices and wireless devices is prohibited, such as on board airplanes or in hospitals, set it to [Disable]. zz Password Set to [None] to allow a Wi-Fi connection to be established without a password (except when connecting to an access point via Wi-Fi). zz Connection history You can set whether to [Show] or [Hide] the history of the Wi-Fi connected devices.
Bluetooth Settings 1Select [k: Bluetooth settings]. 2Select an item. zz Bluetooth If you will not use the Bluetooth function, select [Disable]. zz Check connection information You can check the name and communication status of the paired device. zz Bluetooth address You can check the camera’s Bluetooth address. zz Stay conn. if off Displayed after the camera is paired with a smartphone via Bluetooth.
Changing the Nickname You can change the camera nickname (displayed on smartphones and other cameras) as needed. 1Select [k: Nickname]. text using the virtual 2Enter keyboard (=462). zz When you finish entering characters, press the button.
Geotagging Images with GPS Information from Other Devices You can geotag images with a Bluetooth enabled smartphone. Complete these settings after installing the dedicated Camera Connect app (=380) on the smartphone. the smartphone, activate 1On location services. a Bluetooth connection. 2zEstablish z Connect the camera to a smartphone via Bluetooth (=381). 3Select [k: GPS settings]. [GPS via mobile] to [Enable]. 4zSetz After these settings are complete, start Camera Connect. the picture.
Geotagging Images with GPS Information from Other Devices GPS Connection Display You can check the status of smartphone location information acquisition in the GPS connection icon on the screens for still photo or movie shooting (=583 and =585, respectively). zz Gray: Location services are off zz Blinking: Location information cannot be acquired zz On: Location information acquired Geotagging images as you shoot Images you shoot while the GPS icon is on are geotagged.
Geotagging Images with GPS Information from Other Devices zz The smartphone can acquire location information only while it is paired with the camera via Bluetooth. zz Direction information is not acquired. zz Acquired location information may not be accurate, depending on traveling conditions or smartphone status. zz It may take some time to acquire location information from the smartphone after you turn the camera on. zz Location information is no longer acquired after any of the following operations.
Changing or Deleting Connection Settings To change or delete the connection settings, terminate the Wi-Fi connection first. [k: Wi-Fi/Bluetooth 1Select connection]. an item. 2zSelect z If the history (=449) is displayed, switch the screen with the keys. [Edit/delete device]. 3zSelect z You can change the Bluetooth connection by selecting a smartphone labeled with [s] in gray. After the [Connect to smartphone] screen is displayed, select [Pair via Bluetooth], then press <0> on the next screen.
Changing or Deleting Connection Settings an item. 5zSelect z Change or delete the connection settings on the displayed screen. zz Change device nickname You can change the nickname using the virtual keyboard (=462). zz Viewable imgs (=404) Displayed when [qConnect to smartphone] is selected. Settings will appear at the bottom of the screen.
Clearing Wireless Communication Settings to Default All wireless communication settings can be deleted. By deleting the wireless communication settings, you can prevent their information from being exposed when you lend or give your camera to other people. 1Select [k: Clear wireless settings]. 2Select [OK]. zz Performing [5: Clear all camera settings] does not delete the wireless communication setting information.
View Info Screen You can check error details and the camera’s MAC address. [k: Wi-Fi/Bluetooth 1Select connection]. the button. 2zPress z The [View info] screen will appear. zz When an error has occurred, press <0> to display the error content.
Virtual Keyboard Operations (1) (2) (3) (4) (5) (1) (2) (3) (4) (6) Input area, for entering text Cursor keys, for moving in the input area Current no. of characters/no. available Keyboard (7) (5) (6) (7) (8) (8) Switch input modes Space Delete a character in the input area Finish the text entry zz Use the <5> <5> dials or the cross keys to move within 2 and 4–7. zz Press <0> to confirm input or when switching input modes.
Responding to Error Messages When an error occurs, display the details of the error by following one of the procedures below. Then, eliminate the cause of the error by referring to the examples shown in this chapter. zz On the [View info] screen, press <0> (=461). zz Select [Error details] on the [Wi-Fi on] screen. Click the error code number’s page in the following chart to jump to the corresponding page.
Responding to Error Messages 11: Connection target not found zz In the case of [q], is Camera Connect running? BBEstablish a connection using Camera Connect (=392). zz In the case of [D], is the EOS software running? BBStart the EOS software and reestablish the connection (=410). zz In the case of [l], is the power of the printer on? BBTurn on the printer.
Responding to Error Messages 21: No address assigned by DHCP server What to check on the camera zz On the camera, IP address is set to [Auto setting]. Is this the correct setting? BBIf no DHCP server is used, specify the settings after setting the IP address to [Manual setting] on the camera (=444). What to check on the DHCP server zz Is the power of the DHCP server on? BBTurn on the DHCP server.
Responding to Error Messages 22: No response from DNS server What to check on the camera zz On the camera, does the DNS server’s IP address setting match the server’s actual address? BBSet the IP address to [Manual setting]. Then, on the camera, set the IP address that matches the address of the DNS server used (=444, =477). What to check on the DNS server zz Is the power of the DNS server on? BBTurn on the DNS server.
Responding to Error Messages 23: Device with same IP address exists on selected network What to check on the camera zz Do the camera and another device connected via Wi-Fi to the same network have the same IP address? BBChange the camera’s IP address to avoid using the same address as another device on the network. Otherwise, change the IP address of the device that has a duplicate address.
Responding to Error Messages 61: Selected SSID wireless LAN network not found zz Are any obstacles blocking the line of sight between the camera and the antenna of the access point? BBMove the antenna of the access point to a position clearly visible from the point of view of the camera (=474). What to check on the camera zz Does the SSID set on the camera match that of the access point? BBCheck the SSID at the access point, then set the same SSID on the camera.
Responding to Error Messages 63: Wireless LAN authentication failed zz Are the camera and the access point set to use the same authentication method? BBThe camera supports the following authentication methods: [Open system], [Shared key], and [WPA/WPA2-PSK]. zz Are the camera and the access point set to use the same password for authentication? BBThe setting is case-sensitive, so check upper- and lower-case characters. Make sure that the correct password for authentication is set on the camera.
Responding to Error Messages 65: Wireless LAN connection lost zz Are any obstacles blocking the line of sight between the camera and the antenna of the access point? BBMove the antenna of the access point to a position clearly visible from the point of view of the camera (=474). zz The Wi-Fi connection was lost for some reason, and the connection cannot be restored.
Responding to Error Messages 68: Cannot connect to wireless LAN terminal. Retry from the beginning. zz Did you hold down the access point’s WPS (Wi-Fi Protected Setup) button for the specified period of time? BBHold down the WPS button for the period of time specified in the access point’s instruction manual. zz Are you trying to establish a connection near the access point? BBTry establishing the connection when both devices are within reach of each other.
Responding to Error Messages 125: Check the network settings zz Is the network connected? BBCheck the connection status of the network. 126: Could not connect to server zz CANON iMAGE GATEWAY is under maintenance or load is concentrated temporarily. BBTry connecting to the Web service again later. 127: An error has occurred zz A problem other than error code number 121 to 126 occurred while the camera is connected to the Web service. BBTry again to establish the Wi-Fi connection to the Web service.
Responding to Error Messages 151: Transmission canceled zz Automatic image transfer to the computer was somehow interrupted. BBTo resume automatic image transfer, set the camera’s power switch to <2>, and then set it to <1>. 152: Card’s write protect switch is set to lock zz Is the card’s write protect switch set to the locked position? BBSlide the card’s write protect switch to the writing position.
Wireless Communication Function Notes If the transmission rate drops, the connection is lost, or other problems occur when using the wireless communication functions, try the following corrective actions. Distance Between the Camera and the Smartphone If the camera is too far from the smartphone, a Wi-Fi connection may not be established even when Bluetooth connection is possible. In this case, bring the camera and the smartphone closer together, then establish a Wi-Fi connection.
Wireless Communication Function Notes Cautions for Using Multiple Cameras zz When connecting multiple cameras to one access point via Wi-Fi, make sure the cameras’ IP addresses are different. zz When multiple cameras are connected to one access point via Wi-Fi, the transmission rate drops. zz When there are multiple IEEE 802.11b/g/n (2.4 GHz band) access points, leave a gap of five channels between each Wi-Fi channel to reduce radio wave interference.
Security If security settings have not been properly set, the following problems may occur. zz Transmission monitoring Third parties with malicious intent may monitor the Wi-Fi transmissions and attempt to acquire the data you are sending. zz Unauthorized network access Third parties with malicious intent may gain unauthorized access to the network you are using to steal, modify, or destroy information.
Checking Network Settings zz Windows Open the Windows [Command Prompt], then type ipconfig/all and press the key. In addition to the IP address assigned to the computer, the subnet mask, gateway, and DNS server information are also displayed. zz Mac OS In Mac OS X, open the [Terminal] application, enter ifconfig -a, and press the key. The IP address assigned to the computer is indicated in the [en0] item next to [inet], in the format “***.***.***.***”.
Wireless Communication Status Wireless communication status can be checked on the screen.
Wireless Communication Status Communication status Not connected Screen Wi-Fi function Wi-Fi: Disable Wireless signal strength Off Wi-Fi: Enable Connecting (Blinking) Connected Sending data (fg) Connection error (Blinking) Bluetooth Function Indicator Bluetooth function [Enable] [Disable] Connection status Screen Bluetooth connected s Bluetooth not connected s Bluetooth not connected Not displayed zz “Bluetooth not connected” status is indicated when connected to computers, printers, or
Set-up This chapter describes menu settings on the set-up ([5]) tab. zz A M icon to the right of a page title indicates that the function is available only in , , , , or mode.
Tab Menus: Set-up zz Set-up 1 =484 =486 =489 =490 =492 =493 zz Set-up 2 =494 =495 =496 =497 =500 =502 =503 zz Set-up 3 =507 =508 =509 =510 =511 =501 482
Tab Menus: Set-up zz Set-up 4 =512 =515 =515 =516 =517 =518 zz Set-up 5 =519 =520 =521 =523 =523 =523 483
Select Folder You can freely create and select the folder where the captured images are to be saved. Creating a Folder 1Select [5: Select folder]. 2Select [Create folder]. 3Select [OK].
Select Folder Selecting a Folder (1) (3) (2) (4) zz Select a folder on the folder selection screen. zz Captured images are stored in your selected folder. (1) (2) (3) (4) Number of images in folder Lowest file number Folder name Highest file number Folders zz A folder can contain up to 9999 images (file number 0001–9999). When a folder becomes full, a new folder with the folder number increased by one is created automatically.
File Numbering The captured images saved in a folder are assigned a file number from 0001 to 9999. You can change how the image files are numbered. (Example) IMG_0001.JPG File number 1Select [5: File numbering]. the item. 2zSetz Select [Numbering]. zz Select [Continuous] or [Auto reset]. zz If you want to reset the file numbering, select [Manual reset] (=488). zz Select [OK] to create a new folder, and the file number will start with 0001.
File Numbering Continuous When you wish to continue the file numbering sequence even after the card is replaced or a new folder is created. Even after you replace the card or create a new folder, the file numbering continues in sequence up to 9999. This is useful when you want to save images numbered anywhere between 0001 to 9999 on multiple cards or in multiple folders into one folder on a computer.
File Numbering Auto Reset When you wish to restart the file numbering from 0001 each time the card is replaced or a new folder is created. When you replace the card or create a folder, the file numbering restarts from 0001 for the new images saved. This is useful if you want to organize images by cards or folders.
Auto Rotate You can change the auto rotation setting that straightens images shot in vertical orientation when they are displayed. 1Select [5: Auto rotate]. 2Select an item. zz OnzD Automatically rotates images for display on both the camera and computers. zz OnD Automatically rotates images only for display on computers. zz Off zz Images captured with auto rotation set to [Off] will not rotate during playback even if you later set auto rotation to [On].
Format Card If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera. zz When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images and data to a computer, etc. before formatting the card. 1Select [5: Format card]. the card. 2zFormat z Select [OK].
Format Card Format the Card in the Following Cases: zz The card is new. zz The card was formatted by a different camera or a computer. zz The card is full of images or data. zz A card-related error is displayed (=575). Low-Level Formatting zz Perform low-level formatting if the card’s writing or reading speed seems slow or if you want to totally erase the data on the card. zz Since low-level formatting will format all recordable sectors on the card, the formatting will take longer than normal formatting.
Mode Guide A brief description of the shooting mode can be displayed when you switch shooting modes. 1Select [5: Mode guide]. 2Select [Enable]. the Mode dial. 3zTurn z A brief description of the selected shooting mode is displayed. zz To display more details, press the key. zz To clear the mode guide, press <0>. In <8>, , or mode, the shooting mode selection screen is displayed.
Feature Guide A brief description of functions and items can be displayed when you use Quick Control setting. 1Select [5: Feature guide]. 2Select [Enable]. zz To clear a description, either tap it or continue performing operations.
Eco Mode You can conserve battery power while the shooting screen is displayed. When the camera is not in use, the screen darkens to reduce battery consumption. 1Select [5: Eco mode]. [On]. 2zSelect z If the camera is not used, the screen dims in approx. 2 sec. and then turns off in approx. 10 sec. zz To activate the screen and prepare for shooting when the screen is off, press the shutter button halfway.
Power Saving You can adjust the timing of when the screen and camera turn off automatically ([Display off] and [Auto power off]). 1Select [5: Power saving]. 2Select an item. zz Even when [Auto power off] is set to [Disable], the screen will turn off after the time set in [Display off]. zz [Display off] and [Auto power off] settings do not apply when Eco mode is set to [On]. zz [Viewfinder off] is added when you are using an optional electronic viewfinder, and you can set the timing used to turn it off.
Display Brightness Screen brightness is adjustable. When you use an optional electronic viewfinder, screen and viewfinder brightness can be adjusted separately. 1Select [5: Disp. brightness]. the adjustment. 2zMake z Referring to the gray chart, use the keys to adjust the brightness, then press <0>. zz To check the image’s exposure, referring to the histogram is recommended (=367).
Date/Time/Zone When you turn on the power for the first time or if the date/time/zone have been reset, follow the steps below to set the time zone first. By setting the time zone first, you can simply adjust this setting as needed in the future and the date/time will be updated to match it. Since the captured images will be appended with the shooting date and time information, be sure to set your date/time. 1Select [5: Date/Time/Zone]. zone. 2zSetz Usethethetime keys to select [Time zone].
Date/Time/Zone zz Use the keys to select a [Time difference] item (+/–/hour/ minute), then press <0>. zz Use the keys to set it, then press <0>. zz After entering the time zone or time difference, use the keys to select [OK], then press <0>. and time. 3zSetz Usethethedate keys to select an item, then press <0>. zz Use the keys to set it, then press <0>. saving time. 4zSetz Settheit asdaylight necessary. zz Use the keys to select [Y], then press <0>.
Date/Time/Zone zz The date, time, and time zone settings may be reset when the camera is stored without the battery, when its battery becomes exhausted, or when it is exposed to below freezing temperatures for a prolonged period. If this happens, set them once again. zz After changing [Zone/Time difference], check that the correct date/time are set. zz Auto power off time may be extended while the [5: Date/Time/Zone] screen is displayed.
Language 1Select [5: LanguageK]. 2Set the desired language.
Focus Mode Switch (AF/MF) You can enable or disable switching between manual focus and autofocus using the focus mode switch of attached EF-M lenses. 1Select [5: switch (AF/MF)]. an item. 2zSelect z Enable The focus mode switch applies instead of the [z: Focus mode] menu setting. zz Disable The [z: Focus mode] menu setting applies instead of the focus mode switch, which is deactivated.
Video System Set the video system of any television used for display. This setting determines the frame rates available when you record movies. 1Select [5: Video system]. an item. 2zSelect z For NTSC For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.). zz For PAL For areas where the TV system is PAL (Europe, Russia, China, Australia, etc.).
Sensor Cleaning The camera’s sensor cleaning feature cleans the front of the image sensor. Activating Immediate Cleaning 1Select [5: Sensor cleaning]. [Clean nowf]. 2zSelect z Select [OK] on the confirmation dialog.
Sensor Cleaning Setting Auto Cleaning 1Select [Auto cleaningf]. an item. 2zSelect z Use the keys to select an item, then press <0>. zz For best results, clean with the camera in a stable position on a desk or other flat surface. zz Even if you repeat the sensor cleaning, the result will not improve much. Note that [Clean nowf] may not be available immediately after cleaning.
Sensor Cleaning Manual Sensor Cleaning Dust that could not be removed by automatic cleaning can be removed manually with a commercially available blower or similar tool. The image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. 1Set the power switch to <2>. the lens and clean 2Remove the sensor. the cleaning. 3zEnd z Attach the lens or body cap.
Sensor Cleaning zz During sensor cleaning, never set the power switch to <1>. This will cause the shutter to move, which may damage the image sensor or shutter curtains. zz The surface of the image sensor is extremely delicate. Clean the sensor with care. zz Use a plain blower without any brush attached. A brush can scratch the sensor. zz Do not insert the blower tip inside the camera beyond the lens mount. This may damage the shutter curtains. zz Never use pressurized air or gas to clean the sensor.
Touch Control 1Select [5: Touch control]. an item. 2zSelect z [Standard] is the normal setting. zz [Sensitive] provides a more reactive touch-screen panel response than [Standard]. zz To disable touch operations, select [Disable]. Cautions for Touch Control Operations zz Do not use sharp objects such as fingernails or ballpoint pens for touch operations. zz Do not use wet fingers for touch operations.
Beeping You can disable beeping when subjects are in focus or for other operations. 1Select [5: Beep]. an item. 2Select Touch The beeper will be silent only for touch operations. Disable Disables beeping when subjects are in focus, when you shoot with the self-timer, and when you use touch operations.
HDMI Resolution Set the image output resolution used when the camera is connected to a television or external recording device with an HDMI cable. 1Select [5: HDMI resolution]. an item. 2Select Auto The images will automatically be displayed at the optimum resolution matching the connected television. 1080p Output at 1080p resolution. Select if you prefer to avoid display or delay issues when the camera switches resolution.
HDMI HDR Output You can view RAW images in HDR by connecting the camera to an HDR TV. 1Select [5: HDMI HDR output]. 2Select [On]. zz Image operations such as RAW processing are not available during HDR display. zz Make sure the HDR TV is set up for HDR input. For details on how to switch inputs on the TV, refer to the TV manual. zz Depending on the TV used, images may not look as expected. zz Some image effects and information may not be displayed on an HDR TV.
Shutter Button Function for Movies You can set the functions performed by pressing the shutter button halfway or completely during movie recording. [5: Shutter btn function for 1Select movies]. an item. 2zSelect z Half-press Specify the function performed by pressing the shutter button halfway. zz Fully-press This item is displayed when the Mode dial is set to . Specify the function performed by pressing the shutter button completely.
Shooting Information Display You can customize the details and screens of information shown on the camera when you shoot. Select [5: Shooting info. disp.]. Customizing Information on the Screen 1Select [Screen info. settings]. screens. 2zSelect z Use the keys to select screens of information to show on the camera. zz For information you prefer not to display, press <0> to clear the checkmark [X]. zz To edit the screen, press the button.
Shooting Information Display the screen. 3zEdit z Use the keys to select items to show on the screen. zz For items you prefer not to display, press <0> to clear the checkmark [X]. zz Select [OK] to register the setting. Configuring Display of an Optional Electronic Viewfinder zz In step 1, select [5: VF info/toggle settings]. zz In [5: VF vertical display], you can select how information is displayed in vertical still photo shooting. Grid Display 1Select [Grid display]. 2Select an item.
Shooting Information Display Setting the Histogram 1Select [Histogram disp]. an item. 2zSelect z Select the content ([Brightness] or [RGB]) and display size ([Large] or [Small]). zz Press button to confirm the setting. Clearing Settings 1Select [Reset]. 2Select [OK].
Display Performance You can specify smooth display or power saving display in still photo shooting. 1Select [5: Disp. performance]. 2Select an item. Viewfinder Display Format When using an optional electronic viewfinder, you can select the viewfinder display format. 1Select [5: VF display format]. an item. 2zSelect z Use the keys to select an item. zz Press <0> to set it.
Display Settings When using an optional electronic viewfinder, you can select the display mode for shooting screens. 1Select [5: Display settings]. an item. 2zSelect z Auto Normally use the screen for display, but switch to the viewfinder when you look through it. zz Manual You can restrict display to the screen or viewfinder. screen or viewfinder display. 3zSelect z Press <0> to set it.
Reverse Display A mirror image can be displayed when you shoot with the screen rotated toward the subject (toward the front of the camera). 1Select [5: Reverse display]. [On]. 2zSelect z Select [Off] if you prefer not to reverse display when the screen is rotated toward the front.
Help Features When [zHelp] is displayed below a menu, you can display a description about the feature by pressing the button. Press it again to exit Help display. To scroll the screen when a scrollbar (1) appears on the right, press the keys or turn the <5> dial. zz Example: [z: High ISO speed NR] B (1) Help Display Text Size You can change the text size for the Help display. 1Select [5: Help text size]. 2Select an item.
Custom Shooting Modes (C1/C2) M Current camera settings such as shooting, menu, and Custom Function settings can be registered as Custom shooting modes. [5: Custom shooting mode 1Select (C1, C2)]. 2Select [Register settings]. the desired items. 3zRegister z On the [Register settings] screen, select [Custom shooting mode: C*], then press <0>. zz Select [OK] on the [Custom shooting mode: C*] screen. The current camera settings are registered to Custom shooting mode C*.
Reset Camera M You can restore default camera settings in modes. 1Select [5: Reset camera]. [Basic settings]. 2zSelect z To clear other settings, select [Other settings], then select an item. 3Select [OK]. zz Custom Function (C.Fn) and customized control settings are also reset with “Clearing Custom Function Settings” (=542). zz Basic settings such as [LanguageK] and [Date/Time/Zone] are not restored to defaults.
Copyright Information M When you set the copyright information, it will be recorded to the image as Exif information. 1Select [5: Copyright information]. 2Select an item. text. 3zEnter z Use the cross keys or <5> dial to select a character, then press <0> to enter it. zz By selecting [ ], you can change the input mode. zz To delete the previous character, select [ ] and press <0>. the setting. 4zExit z Press the button, then press [OK].
Copyright Information Checking the Copyright Information When you select [Display copyright info.] in step 2, you can check the [Author] and [Copyright] information that you entered. Deleting the Copyright Information When you select [Delete copyright information] in step 2, you can delete the [Author] and [Copyright] information. zz If the entry for “Author” or “Copyright” is long, it may not be displayed entirely when you select [Display copyright info.].
Other Information zz Manual/software URL To download instruction manuals, select [5: Manual/software URL] and scan the displayed QR code with a smartphone. You can also use a computer to access the website at the URL displayed and download software. zz Certification Logo DisplayM Select [5: Certification Logo Display] to display some of the logos of the camera’s certifications. Other certification logos can be found in this Instruction Manual, on the camera body, and on the camera’s package.
Custom Functions / My Menu You can fine-tune camera functions and change the functionality of buttons and dials to suit your shooting preferences. You can also add menu items and Custom Functions that you adjust frequently to My Menu tabs.
Tab Menus: Customization =528 =532 =534 =542 =542 526
Setting Custom Functions M [C.Fn I:Exposure], [C.Fn II: 1Select Autofocus], or [C.Fn III:Operation/ Others]. (1) a Custom Function number. 2zSelect z Use the keys to select the Custom Function number (1) to set up. the setting as desired. 3zChange z Use the keys to select a setting (number). zz To set up another Custom Function, repeat steps 2–3. zz At the bottom of the screen, the current Custom Function settings are indicated below the respective function numbers.
Custom Function Setting Items M You can customize camera features on the [8] tab to suit your shooting preferences. C.Fn I: Exposure C.Fn I-1: Exposure level increments Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc. zz 0: 1/3-stop zz 1: 1/2-stop zz When [1/2-stop] is set, the display will be as shown below. C.Fn I-2: ISO speed setting increments You can change the manual ISO speed setting increments to a whole-stop.
Custom Function Setting Items C.Fn I-3: Bracketing auto cancel You can specify to cancel AEB and white balance bracketing when the power switch is set to <2>. zz 0: Enable zz 1: Disable C.Fn I-4: Bracketing sequence The AEB shooting sequence and white balance bracketing sequence can be changed.
Custom Function Setting Items C.Fn I-5: Number of bracketed shots The number of shots taken with AEB and white balance bracketing can be changed. When [Bracketing sequence] is set to [0, –, +], the bracketed shots will be taken as shown in the table below.
Custom Function Setting Items C.Fn I-6: Safety shift If the subject brightness changes and the standard exposure cannot be obtained within the autoexposure range, the camera will automatically change the manually selected setting to obtain the standard exposure. When set to [Shutter speed/Aperture], this setting applies to and modes. When set to [ISO speed], this setting applies to , , and modes.
Custom Function Setting Items C.Fn II: Autofocus C.Fn II-1: Limit AF methods You can limit the AF methods available to those that you will use. For details on AF methods, see =198–=200. Add a checkmark [X] to the AF methods to make available. Select [OK] to register the setting. zz The [X] mark cannot be removed from [1-point AF]. C.Fn II-2: Orientation linked AF point You can assign AF points or Zone AF frames to different positions based on whether you are shooting vertically or horizontally.
Custom Function Setting Items C.Fn II-3: Initial Servo AF pt for c You can set the initial AF point for Servo AF when the AF method is set to [u+Tracking]. zz 0: Auto The initial AF point of Servo AF for [u+Tracking] is set automatically to suit the shooting conditions. zz 1: Initial AF pt set for c Servo AF starts from the manually set AF point when AF operation is set to [Servo AF] and the AF method is set to [u+Tracking].
Custom Function Setting Items C.Fn III: Operation/Others C.Fn III-1: Dial direction during Tv/Av Dial turning direction when setting the shutter speed and aperture can be reversed. In the shooting mode, the turning direction of the <6> and <5> dial will be reversed. In other shooting modes, the turning direction of only the <6> dial will be reversed. The direction of the <5> dial in mode matches the direction to set exposure compensation in , , and modes.
Custom Function Setting Items C.Fn III-2: Customize buttons You can assign frequently used functions to buttons, such as or . Different functions, for use when shooting still photos or movies, can be assigned to the same button. 1Select a part of the bar. a function to assign. 2zSelect z Press <0> to set it.
Custom Function Setting Items Functions Available for Buttons Function Metering and AF start L k k k AF stop k k AF point selection k k Set AF point to center k k One-Shot AFzServo AF*1 k k AF method*1 k k Touch & drag AF k k Direct AF point selection AF Eye Detection AF*1 k k Peaking k k AE lock k k AE lock (hold) k k AE lock (while button pressed) Exposure Movies 536 O g AE lock/FE lock*1 k k Exposure compensation k k k k Metering mode*1 k k Flash functio
Custom Function Setting Items k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k 537
Custom Function Setting Items Function Press buttons directly Q L Menu Dial function settings k k Depth-of-field preview*1 k k Reset selected item in Fv mode*1 k k Reset Tv/Av/ /ISO in Fv mode*1 k k Quick Control screen k k Magnify/Reduce k k Menu display k k Image quality*1 k k Still image aspect ratio*1 k k Drive mode*1 k k Auto Lighting Optimizer k k Picture Style k k Touch Shutter*1 k k RAW burst mode*1 k k Select folder k k Create folder*1 k k Maximi
Custom Function Setting Items k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k
Custom Function Setting Items C.Fn III-3: Customize dials You can assign frequently used functions to dials, such as <5>, <6>, or <5>. 1Select a part of the bar. a function to assign. 2zSelect z Press <0> to set it.
Custom Function Setting Items C.Fn III-4: Release shutter without lens You can specify whether shooting still photos or movies is possible without a lens attached to the camera. zz 0: Disable zz 1: Enable C.Fn III-5: Retract lens on power off Lens retraction setting for gear-driven EF or EF-S STM lenses (such as EF 40mm f/2.8 STM) attached to the camera. You can specify whether to retract lenses that are extended in use automatically when you turn the camera off.
Clearing Custom Function Settings zz Clearing all Custom Function settings By selecting [8: Clear all Custom Func. (C.Fn)], you can clear all Custom Function settings other than [Customize buttons] and [Customize dials] settings. zz Clearing [Customize buttons] and [Customize dials] settings By selecting [8: Clear customized settings], you can clear [Customize buttons] and [Customize dials] settings.
Tab Menus: My Menu =544 =547 =547 =548 543
Registering My Menu M Under My Menu tab, you can register menu items and Custom Functions whose settings you change frequently. Creating and Adding My Menu Tab 1Select [Add My Menu tab]. [OK]. 2zSelect z You can create up to five My Menu tabs by repeating steps 1 and 2. Registering Menu Items under the My Menu Tab(s) 1Select [9: Configure].
Registering My Menu 2Select [Select items to register]. the desired items. 3zRegister z Select the item to be set, then press <0>. zz Select [OK] on the confirmation dialog. zz You can register up to six items. zz To return to the screen in step 2, press the button. My Menu Tab Settings You can sort and delete items under the menu tab, and rename or delete the menu tab. zz Sort registered items You can change the order of the registered items in My Menu.
Registering My Menu zz Delete tab You can delete the current My Menu tab. Select [Delete tab] to delete the [MY MENU*] tab. zz Rename tab You can rename the My Menu tab from [MY MENU*]. 1Select [Rename tab]. text. 2zEnter z Select [ ] to delete any unnecessary characters. zz Use the cross keys or <5> dial to select a character, then press <0>. zz By selecting [ ], you can change the input mode. input. 3zConfirm z Press the button, then press [OK].
Registering My Menu Deleting all My Menu tabs/Deleting all items You can delete all the created My Menu tabs or My Menu items registered under them. zz Delete all My Menu tabs You can delete all My Menu tabs you created. When you select [Delete all My Menu tabs], all the tabs from [MY MENU1] to [MY MENU5] will be deleted and the [9] tab will revert to its default. zz Delete all items You can delete all the items registered under the [MY MENU1] to [MY MENU5] tabs. The tab(s) will remain.
Registering My Menu Menu Display Settings You can select [Menu display] to set the menu screen that is to appear first when you press the button. zz Normal display Displays the last displayed menu screen. zz Display from My Menu tab Displays with the [9] tab selected. zz Display only My Menu tab Only the [9] tab is displayed. (The [z], [3], [k], [5], and [8] tabs will not be displayed.
Reference This chapter provides reference information on camera features.
Software Downloading and Installing the EOS Software or Other Dedicated Software Always install the latest version of the software. Update any previous versions that are installed by overwriting them with the latest version. zz Do not connect the camera to a computer before you install the software. The software will not be installed correctly. zz The software cannot be installed unless the computer is connected to the Internet. zz Previous versions cannot display images from this camera correctly.
Software (1) Double-click the dmg file. BBA drive icon and installer file will appear on the desktop. If the installer file does not appear, double-click the drive icon to display it. (2) Double-click the installer file. BBThe installer starts. 2Follow the on-screen instructions to install the software. Downloading the Software Instruction Manuals Software Instruction Manuals (PDF files) can be downloaded from the Canon website to your computer. zz Software Instruction Manual Download Site www.canon.
Importing Images to a Computer You can use EOS software to import images from the camera to a computer. There are three ways to do this. Connecting to a Computer via an Interface Cable 1Install the software (=550). the camera to the 2Connect computer with Interface Cable IFC-100U (sold separately; computer end: USB Type-C). zz Insert the cord’s plug into the camera’s digital terminal. zz Connect the cord’s plug to the computer’s USB terminal. EOS Utility to import the 3Use images.
Importing Images to a Computer Card Reader You can use a card reader to import images to a computer. 1Install the software (=550). 2Insert the card into the card reader. Digital Photo Professional to 3Use import the images. zz Refer to the Digital Photo Professional Instruction Manual. zz When downloading images from the camera to a computer with a card reader without using EOS software, copy the DCIM folder on the card to the computer.
In-Camera Charging Using USB Power Adapter PD-E1 (sold separately), you can charge Battery Pack LP-E17 without removing it from the camera. Charging stops if you operate the camera. the USB power adapter. 1zConnect z With the camera’s power switch set to <2>, insert the USB power adapter plug fully into the digital terminal. the power cord. 2zConnect z Connect the power cord to the USB power adapter and plug the other end into a power outlet. zz Charging begins, and the access lamp (1) is lit in orange.
Household Power Outlet Accessory zz If the access lamp does not light up, try unplugging the USB power adapter and plugging it in again. zz The charging time required and the amount charged vary depending on ambient temperature and remaining capacity. zz For safety reasons, recharging in low temperatures (0–10°C / 41–50°F) will take longer. zz Batteries are not charged when the camera is connected via Wi-Fi or when the card slot/battery compartment cover is open.
Troubleshooting Guide If a problem occurs with the camera, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center. Power-Related Problems Batteries cannot be charged with the charger. zz Do not use any battery packs other than a genuine Canon Battery Pack LP-E17. The charger’s lamp blinks at high speed.
Troubleshooting Guide Batteries cannot be charged with the USB power adapter (sold separately). zz Batteries are not charged while the camera’s power switch is set to <1>. zz Operating the camera will stop charging in progress. The access lamp blinks during charging with the USB power adapter. zz In case of charging problems, the access lamp blinks in green and a protective circuit stops charging.
Troubleshooting Guide [Does this battery/do these batteries display the Canon logo?] is displayed. zz Do not use any battery packs other than a genuine Canon Battery Pack LP-E17. zz Remove and install the battery again (=42). zz If the electrical contacts are dirty, use a soft cloth to clean them. The battery becomes exhausted quickly. zz Use a fully charged battery (=40). zz The battery performance may have degraded. If the battery performance is poor, replace the battery with a new one.
Troubleshooting Guide Shooting-Related Problems The lens cannot be attached. zz To attach EF or EF-S lenses, you will need a mount adapter. The camera cannot be used with RF lenses. No images can be shot or recorded. zz Make sure the card is properly inserted (=42). zz Slide the card’s write-protect switch to the Write/Erase setting (=42). zz If the card is full, replace the card or delete unnecessary images to make space (=42, =327).
Troubleshooting Guide The image is out of focus or blurred. zz Switch to AF focus mode (=7, =52). zz Press the shutter button gently to prevent camera shake (=58). zz With a lens equipped with an Image Stabilizer, set the IS switch to <1>. zz In low light, the shutter speed may become slow. Use a faster shutter speed (=106), set a higher ISO speed (=143), use flash (=283), or use a tripod. zz See “Minimizing Blurred Photos” on =73. I cannot lock the focus and recompose the shot.
Troubleshooting Guide The maximum burst during continuous shooting is lower. zz If you shoot a subject that has fine detail such as a field of grass, the file size will be larger, and the actual maximum burst may be lower than the number listed on =577. Even after I change the card, the maximum burst displayed for continuous shooting does not change. zz The maximum burst displayed does not change when you switch cards, even if you switch to a high-speed card.
Troubleshooting Guide Not all the lens aberration correction options are displayed. zz Although [Chromatic aberr corr] and [Diffraction correction] are not displayed when [Digital Lens Optimizer] is set to [Enable], both functions are applied in shooting, as when set to [Enable]. zz During movie recording, [Digital Lens Optimizer] and [Diffraction correction] will not be displayed. Using flash in or mode lowers the shutter speed. zz Under [z: Flash control], set [Slow synchro] to [1/200-1/60sec.
Troubleshooting Guide The specified exposure changes when I shoot with ISO Auto using flash. zz When there is a risk of overexposure in flash photography, shutter speed or ISO speed is automatically adjusted to reduce loss of detail in highlights and shoot at standard exposure. In flash shots with certain lenses, shutter speeds and ISO speeds displayed when you press the shutter button halfway may not match the actual settings used. This may alter the brightness of backgrounds that are out of flash range.
Troubleshooting Guide During movie recording, the red E icon is displayed. zz It indicates that the camera’s internal temperature is high. If the red [E] icon is displayed, it indicates that the movie recording will soon stop automatically (=280). Movie recording stops by itself. zz If the card’s writing speed is slow, movie recording may stop automatically. For cards that can record movies, see =579. To find out the card’s writing speed, refer to the card manufacturer’s website, etc.
Troubleshooting Guide [F] is displayed. zz [F] may be displayed after repeated movie recording under the following settings, or if you keep the camera standing by for movie recording over extended periods. zz 4K movie recording zz High Frame Rate movie recording zz Movie recording while connected via Wi-Fi zz The camera turns off automatically in approx. 3 min. if you continue recording while [F] is displayed.
Troubleshooting Guide The subject looks distorted during movie recording. zz If you move the camera to the left or right (panning) or shoot a moving subject, the image may look distorted. The problem may be more noticeable in time-lapse movie recording. I cannot take still photos during movie recording. zz Still photos cannot be taken during movie recording. Before taking still photos, stop recording the movie, then select a shooting mode for still photos.
Troubleshooting Guide Problems with Wireless Features Cannot pair with a smartphone. zz Use a smartphone compliant with Bluetooth Specification Version 4.1 or later. zz Turn on Bluetooth from the smartphone settings screen. zz Pairing with the camera is not possible from the smartphone’s Bluetooth settings screen. Install the dedicated app Camera Connect (free of charge) on the smartphone (=380).
Troubleshooting Guide Cannot reconnect to a smartphone. zz Even with a combination of the same camera and smartphone, if you have changed the settings or selected a different setting, reconnection may not be established even after selecting the same SSID. In this case, delete the camera connection settings from the Wi-Fi settings on the smartphone and set up a connection again. zz A connection may not be established if Camera Connect is running when you reconfigure connection settings.
Troubleshooting Guide Display Problems The menu screen shows fewer tabs and items. zz In Basic Zone modes, some tabs and items are not displayed. Tabs and items on the menu screen also vary for still photos and movies. The display starts with [9] My Menu, or the [9] tab alone is displayed. zz [Menu display] on the [9] tab is set to [Display from My Menu tab] or [Display only My Menu tab]. Set [Normal display] (=548). The file name’s first character is an underscore (“_”).
Troubleshooting Guide The shooting date and time displayed are incorrect. zz Make sure the correct date and time are set (=497). zz Check the time zone and daylight saving time (=497). The date and time are not in the image. zz The shooting date and time do not appear in the image. The date and time are recorded in the image data as shooting information. When printing, you can imprint the date and time in the picture, using the date and time recorded in the shooting information (=331).
Troubleshooting Guide Playback Problems Part of the image blinks in black. zz [3: Highlight alert] is set to [Enable] (=369). A red box is displayed on the image. zz [3: AF point disp.] is set to [Enable] (=370). During image playback, the AF points are not displayed. zz The AF points are not displayed when the following types of images are played back: zz Images taken in the <8: FG> modes. zz Images taken with Multi Shot Noise Reduction applied. zz Cropped images.
Troubleshooting Guide Operation sound and mechanical sound can be heard during movie playback. zz If you operate the camera’s dials or lens during movie recording, the operation sound will also be recorded. Using the Directional Stereo Microphone DM-E1 (sold separately) is recommended (=249). The movie appears to freeze momentarily. zz If there is a drastic change in the exposure level during autoexposure movie recording, the recording will stop momentarily until the brightness stabilizes.
Troubleshooting Guide My card reader does not recognize the card. zz Depending on the card reader used and the computer’s operating system, SDXC cards may not be correctly recognized. In this case, connect your camera to the computer with the interface cable, then import the images to the computer using EOS Utility (EOS software). The image cannot be resized. zz With this camera, you cannot resize JPEG b and RAW images (=356). The image cannot be cropped.
Troubleshooting Guide Sensor Cleaning Problems The shutter makes a sound during sensor cleaning. zz Under [5: Sensor cleaning], when you select [Clean nowf], the shutter will make a mechanical sound during the cleaning, but no picture will be recorded to the card (=174, =503). Automatic sensor cleaning does not work. zz If you repeatedly turn the power switch <1> and <2> within a short time period, the [f] icon may not be displayed (=47). Computer Connection Problems I cannot import images to a computer.
Error Codes (1) If there is a problem with the camera, an error message will appear. Follow the on-screen instructions. If the problem persists, write down the error code (Err xx) and contact a Canon Service Center.
Performance Data Still Photo Shooting zz Number of Possible Shots Approx. 305 shots (at a room temperature of 23°C/73°F) • Based on using the screen and a fully charged Battery Pack LP-E17, and following CIPA (Camera & Imaging Products Association) testing standards. zz ISO Auto Range Shooting Mode t/d/s/f/a ISO Speed No Flash With Flash ISO 100–25600* ISO 100–1600* * The actual ISO speed range depends on the [Minimum] and [Maximum] set with [Auto range].
Performance Data zz Guide to Image Quality Settings Image Quality Pixels Recorded File Size (MB) (Approx.) Possible Shots Maximum Burst Standard High Speed JPEG 73 83 74 84 7a 8a 32M 15M 8.1M 3.8M b 11.1 2720 54 54 5.6 5380 54 54 5.8 5190 54 54 3.0 9860 54 54 3.6 8390 54 54 2.0 14600 54 54 1.6 18390 54 54 RAW 1 32M 35.6 850 23 23 F 32M 20.4 1490 34 36 1 73 32M 32M 35.6+11.1 650 23 23 F 73 32M 32M 20.4+11.
Performance Data zz Pixel Count at Specific Aspect Ratios (Approx. pixels) Image Quality 3:2 4:3 1/F 6960×4640 (32.3 megapixels) 6960×4640 (32.3 megapixels) 3 6960×4640 (32.3 megapixels) 6160×4640* (28.6 megapixels) a 4800×3200 (15.4 megapixels) 4256×3200* (13.6 megapixels) a 3472×2320* (8.1 megapixels) 3072×2320* (7.1 megapixels) b 2400×1600 (3.8 megapixels) 2112×1600* (3.4 megapixels) Image Quality 16:9 1:1 1/F 6960×4640 (32.3 megapixels) 6960×4640 (32.
Performance Data Movie Recording zz Cards that Can Record Movies Movie Recording Size H L 65 SD Card X UHS-I, UHS Speed Class 3 or higher 23 X UHS-I, UHS Speed Class 3 or higher 87 X SD Speed Class 10 or higher 65 X HDR movie w 65 V 87 X SD Speed Class 4 or higher • When [k Digital IS] is disabled. • This table indicates the card’s writing and reading speeds required for recording movies (card performance requirements).
Performance Data zz Total Movie Recording Time and File Size Per Minute (Approx.) Movie Recording Size Total Possible Recording Time on Card 8 GB 32 GB 128 GB File Size 65 X 8 min. 35 min. 2 hr. 21 min. 860 MB/min. 23 X 8 min. 35 min. 2 hr. 22 min. 858 MB/min. 87 X 17 min. 1 hr. 10 min. 4 hr. 43 min. 431 MB/min. L 65 X 35 min. 2 hr. 20 min. 9 hr. 23 min. 216 MB/min. 1 hr. 26 min. 5 hr. 47 min. 23 hr. 11 min. 87 MB/min. 40 min. 2 hr. 42 min. 10 hr. 49 min. 187 MB/min.
Performance Data ISO Speed in Movie Recording In [k] Mode zz The ISO speed will be set automatically within ISO 100–12800. zz Under [z: kISO speed settings], setting [Max for Auto] to [H(25600)] (=277) expands the maximum limit of the automatic ISO speed setting range to H (equivalent to ISO 25600). In [M] Mode zz With ISO speed set to [AUTO], the speed is automatically set in a range of ISO 100–12800.
Performance Data Image Playback zz Resize Options by Original Image Quality Available Resize Settings Original Image Quality 4 a 3* k k k k k 4 b k a zz Size for Resized Images (Approx. pixels) Image Quality 3:2 4:3 4 4800×3200 (15.4 megapixels) 4256×3200* (13.6 megapixels) a 3472×2320* (8.1 megapixels) 3072×2320* (7.1 megapixels) b 2400×1600 (3.8 megapixels) 2112×1600* (3.4 megapixels) Image Quality 16:9 1:1 4 4800×2688* (12.9 megapixels) 3200×3200 (10.
Information Display Still Photo Shooting Screen Each time you press the button, the information display will change. zz The display will show only the settings currently applied. (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) Movie recording time available Maximum burst Possible shots/Sec.
Information Display (28) (29) (30) (31) (32) (33) (38) (39) (40) (41) (42) (34) (43) (35) (36) (37) (28) 1 indicator (29) Flash ready/FE Lock/High-speed sync (30) Electronic (31) Drive mode (32) Touch Shutter (33) AE lock (34) Shutter speed (35) Aperture value (44) (36) (37) (38) (39) (40) (41) (42) (43) (44) Flash exposure compensation Exposure level indicator Wi-Fi function Wi-Fi signal strength Bluetooth function ISO speed Highlight tone priority Exposure compensation AEB/FEB zz You can set what
Information Display Movie Recording Screen Each time you press the button, the information display will change. zz The display will show only the settings currently applied.
Information Display (27) (28) (29) (30) (31) (22) (23) (24) (25) (26) (22) Sound-recording level indicator (manual) (23) AE lock (24) Shutter speed (25) Aperture value (26) Exposure level indicator (27) Movie recording in progress (32) (33) (34) (28) (29) (30) (31) (32) (33) (34) AF/MF selection Wi-Fi signal strength Bluetooth function ISO speed Highlight tone priority Wi-Fi function Exposure compensation zz You can set what is displayed for when you press the button (=512).
Information Display Scene Icons In the shooting mode, the camera detects the scene type and sets everything automatically to suit the scene. The detected scene type is indicated on the upper left of the screen.
Information Display Playback Screen zz Basic information display for still photos (1) (2) (3) (4) (1) (2) (3) (4) (8) (9) (10) (11) (12) (5) (6) (7) (13) (14) (15) Wi-Fi function Wi-Fi signal strength Battery level Playback No.
Information Display zz Detailed information display for still photos (8) (1) (9) (10) (11) (12) (2) (3) (13) (14) (4) (15) (5) (6) (7) (1) (2) (3) (4) (5) (6) (7) (8) (9) Aperture value Shutter speed Shooting mode White balance Auto Lighting Optimizer White balance correction Picture Style/Settings Exposure compensation amount Shooting date and time (16) (10) (11) (12) (13) Histogram (Brightness/RGB) ISO speed Highlight tone priority Flash exposure compensation/ Bounce/HDR shooting/Multi Shot No
Information Display zz Detailed information display for movies (1) (2) (6) (3) (4) (5) (1) (2) Movie playback Movie recording mode/Time-lapse movie/Video snapshot Image size Frame rate (3) (4) (7) (8) (5) (6) (7) (8) Compression method Movie digital IS Recording time Movie recording format * [G] will be displayed for still photos taken as test shots for time-lapse movies. zz During movie playback, “*, *” will be displayed for [Fineness] and [Threshold] of [Picture Style]’s [Sharpness].
Trademarks zz Adobe is a trademark of Adobe Systems Incorporated. zz Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. zz Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. zz SDXC logo is a trademark of SD-3C, LLC. zz HDMI, HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
About MPEG-4 Licensing “This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video. No license is granted or implied for any other use for MPEG-4 standard.
● CMSIS Core header files Copyright (C) 2009-2015 ARM Limited. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: -- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
● KSDK Peripheral Drivers, Flash / NVM, KSDK H/W Abstraction Layer (HAL) (c) Copyright 2010-2015 Freescale Semiconductor, Inc. ALL RIGHTS RESERVED. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Use of Genuine Canon Accessories Is Recommended This product is designed to achieve optimum performance when used with genuine Canon accessories. Therefore, using this product with genuine accessories is highly recommended. Canon shall not be liable for any damage to this product and/or accidents such as malfunction, fire, etc. caused by the failure of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery).
Index Numbers 1-point AF : 198, 203 [4K] 3840×2160 (Movie) : 241 4K frame capture : 315 A Access lamp : 43 Accessories : 3 Adobe RGB : 162 AEB (Auto Exposure Bracketing) : 141 AE lock : 217, 233, 531 AF AF-assist beam : 197, 215 AF method : 198 AF operation : 195 AF point selection : 203 AF speed : 274 Area AF frame : 84, 206 Beep (Beeper) : 508 Continuous AF : 211 Eye detection AF : 209 Lens electronic MF : 214 Limit AF methods : 532 Manual focus : 218 Orientation linked AF point : 532 Recomposing : 74 To
Index Troubleshooting : 45, 559 Write protection : 42 Center-weighted average metering : 151 Certification Logo : 523 Charger : 38, 40 Charging : 40, 554 Chromatic aberration correction : 131, 346 Clearing settings : 520 Custom shooting mode : 519 Shooting information display : 514 Clipped highlights : 369 Close-up : 87 Color space : 162, 345 Color temperature : 159 Color tone : 88, 167 Combination IS : 269 Compact Power Adapter : 555 Continuous (file numbering) : 487 Continuous shooting : 133 Contrast : 1
Index Feature guide : 493 FEB (Flash Exposure Bracketing) : 298 FE lock : 287 [FHD] 1920×1080 (Movie) : 241 File extension : 122, 243 File size : 246, 577, 580 Filter effect (Monochrome) : 168 Fine (Image quality) : 122 Firmware : 523 First-curtain synchronization : 297 Fish-eye effect : 98, 339 Flash Flash exposure compensation : 286, 293 Flash exposure compensation : 286, 293 Flash mode : 292, 295 Flash (Speedlite) Built-in flash : 284 Custom Functions : 298 Effective range : 284 External flash units : 3
Index Image browsing (jump display) : 365 Image quality : 122, 577 Image review time : 127 Images AF point display : 370 Auto reset : 488 Auto rotation : 489 Continuous (file numbering) : 487 Erasing : 327 File numbering : 486 Highlight alert : 369 Histogram : 367 Importing (to computer) : 552 Index display : 308 Jump display (image browsing) : 365 Magnifying images : 307 Manual reset : 488 Manual rotation : 326 Playback : 301 Protecting images : 323 Rating : 358 Search conditions : 363 Shooting informatio
Index Playback : 302 Setting procedure : 63 Still photo shooting : 117 Wireless communication functions : 376 Metering mode : 151 Metering timer : 153 MF (Manual focusing) : 218 M-Fn button : 34, 60 MF peaking : 220 Microphone : 233, 249 Miniature effect : 99, 101, 340 Miniature effect movie : 266 M (Manual exposure) : 110 Mode dial : 36 Monochrome : 164, 168 Movies : 227 AE lock : 233 Attenuator : 249 Autoexposure recording : 232 Auto level for movies : 270 Auto slow shutter : 279 Cards that can record mo
Index Playback : 301 Portrait : 81 Possible recording time (movie) : 580 Possible shots : 576 Power : 47 Auto power off : 495 Battery level : 48 Charging : 40, 554 Household power : 555 Possible shots : 576 Power saving : 495 P (Program AE) : 104 Pressing completely : 58, 511 Pressing halfway : 58, 511 Printing Photobook set-up : 335 Print order : 331 Program AE : 104 Program shift : 105 Protecting images : 323 Q [Q] (Quick Control) : 67 Quick Control : 67 Quick control dial : 34, 59 R Rating : 358 RAW :
Index Toy camera effect : 98 Water painting effect : 98 Fv (Flexible-priority AE) : 112 M (Manual exposure) : 110 P (Program AE) : 104 Special scene mode (SCN) : 78 Close-up : 87 Food : 88 Handheld night scene : 90 HDR Backlight Control : 91 Landscape : 83 Night Portrait : 89 Panning : 85 Portrait : 81 Self Portrait : 80 Smooth skin : 82 Sports : 84 Tv (Shutter-priority AE) : 106 Shooting mode guide : 492 Shutter button : 58, 511 Shutter button functions : 511 Shutter-priority AE : 106 Shutter release meth
Index Bracketing : 161 Color temperature setting : 159 Correction : 160 Custom : 158 White priority : 155 White priority (AWB) : 155, 157 Wi-Fi function : 375 Android : 380 Camera access point mode : 444 Camera Connect : 380, 386 CANON iMAGE GATEWAY : 426 Clearing wireless communication settings : 460 Connection history : 449, 452 Edit device information : 404, 458 EOS Utility : 408 Erase connection information : 459 Image Transfer Utility 2 : 413 iOS : 380 IP address : 444 MAC address : 461 Network : 391,
CANON INC. 30-2 Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Europe, Africa & Middle East CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands For your local Canon office, please refer to your warranty card or to www.canon-europe.com/Support The product and associated warranty are provided in European countries by Canon Europa N.V. The descriptions in this Instruction Manual are current as of July 2019.
