PUB. DIE-0496-000 Digital Cinema Camera ACES Workflow Introduction Firmware ver. 1.0.4.1.
Color Grading with the ACES Workflow Post-production REC OUT or MON. terminal External 4K recorder MON. or HDMI OUT terminal RAW data Cinema RAW Development Input Transform 4K RAW recording OpenEXR (ACES 1.0) Color grading ASCCDL ACESproxy Inverse log ASC-CDL Output Transform Output Transform On-set Color Grading ACESproxy: ACESproxy video data that is output from the MON. terminal or HDMI OUT terminal when performing on-set color grading.
Applying a LUT to Screens/Video Outputs While recording using special gamma curves, you can apply a LUT to video output from the REC OUT terminal, MON. terminal or HDMI OUT terminal and to the image displayed on the LCD screen or viewfinder. When a LUT is applied, the displayed image will look as if a standard gamma curve and color space were used, making it easier to check the image on the display device used.
NOTES • When you apply the [ACESproxy] LUT to the REC OUT terminal, MON. terminal or HDMI OUT terminal, the selected terminal will output ACESproxy video data. Using a compatible monitor*, you can perform on-set color grading and check the image after color correction as you continue shooting (A 2). * When using the HDMI OUT terminal, a monitor that supports YCbCr Full Range quantization is required.