Specifications

ManualsBrandsCanon ManualsFilm CameraElan 7 NE 33V

LENS

EF28–135mm f/3.5–5.6 IS USM

Instruction

EENNGG

00_7594_H1_JEFSKFOR.qxd 10.2.16 4:17 PM ページ 2

COPY

Summary of content (14 pages)

PAGE 1
00_7594_H1_JEFSKFOR.qxd 10.2.16 4:17 PM ページ 2 LENS EF28–135mm f/3.5–5.
PAGE 2
02-7594_ENG 10.2.13 9:46 AM Page 1 English Instructions Features Thank you for purchasing a Canon product. Canon EF28-135mm f/3.5-5.6 IS USM is a highperformance lens developed for EOS cameras that incorporates an Image Stabilizer function. ● “IS” stands for Image Stabilizer. ● “USM” stands for Ultrasonic Motor. a Handling Cautions 1. The Image Stabilizer gives the equivalent effect of a shutter speed two stops* faster. 2. High-magnification zoom from 28 mm wide-angle to 135 mm telephoto. 3.
PAGE 3
02-7594_ENG 10.2.13 9:46 AM Page 2 a Safety Precautions a Safety Precautions 1. Do not look at the sun or a bright light source through the lens or camera. Doing so could result in loss of vision. Looking at the sun directly through the lens is especially hazardous. 2. Whether it is attached to the camera or not, do not leave the lens under the sun without the lens cap attached. This is to prevent the lens from concentrating the sun’s rays, which could cause a fire.
PAGE 4
02-7594_ENG 10.2.13 9:46 AM Page 3 Nomenclature Focus mode switch(→ 5) Hood mount Zoom position index Distance scale(→ 8) Zoom ring(→ 5) PY O C Focusing ring(→ 5) Image stabilizer switch(→ 6) For detailed information, reference page numbers are provided in parentheses (→ **).
PAGE 5
02-7594_ENG 10.2.13 9:46 AM Page 4 1. Mounting and Detaching the Lens See your camera’s instructions for details on mounting and detaching the lens. • After detaching the lens, place the lens with the rear end up to prevent the lens surface and contacts from getting scratched. • If the contacts get soiled, scratched, or have fingerprints on them, corrosion or faulty connections can result. The camera and lens may not operate properly.
PAGE 6
02-7594_ENG 10.2.13 9:46 AM Page 5 2. Zooming To zoom, turn the lens’ zoom ring. Be sure to finish zooming before focusing. Changing the zoom ring after focusing can affect the focus. PY O C 3. Setting the Focus Mode To shoot in autofocus (AF) mode, set the focus mode switch to AF. To shoot in manual focus (MF) mode, set the focus mode switch to MF, and focus by turning the focusing ring. The focusing ring always works, regardless of the focus mode.
PAGE 7
02-7594_ENG 10.2.15 5:11 PM Page 6 4. Image Stabilizer 1 2 You can use the image stabilizer in AF or MF mode. 1. Set the STABILIZER switch to ON. • If you are not going to use the image stabilizer function, set the switch to OFF. 2. When you press the shutter button halfway, the Image Stabilizer will start operating. • Make sure the image in the viewfinder is stable, press the shutter button the rest of the way down to take the picture.
PAGE 8
02-7594_ENG 10.2.13 9:46 AM Page 7 5. Tips on Using the Image Stabilizer The image stabilizer in this lens is effective for hand-held shots under the following conditions. • In semi-darkened areas such as indoors or outdoors at night. • In locations where flash photography is prohibited, such as art museums and theater stages. • In situations where your footing is uncertain. • In situations where fast shutter settings cannot be used.
PAGE 9
02-7594_ENG 10.2.15 5:11 PM Page 8 6. Infinity Compensation Mark Distance index To compensate for shifting of the infinity focus point that results from changes in temperature. The infinity position at normal temperature is the point at which the vertical line of the L mark is aligned with the distance indicator on the distance scale. For accurate focusing in MF on subjects at infinity distance, look through the viewfinder while rotating the focusing ring. Infinity compensation mark 7.
PAGE 10
02-7594_ENG 10.2.13 9:46 AM Page 9 8. Hood and Filters Hood (Sold Separately) The EW-78B II lens hood can keep unwanted light out of the lens, and also protects the lens from rain, snow, and dust. To attach the hood, align the hood’s attachment position mark with the red dot on the front of the lens, then turn the hood in the direction of the arrow until the lens’s red dot is aligned with the hood’s stop position mark. The hood can be reversemounted on the lens for storage.
PAGE 11
02-7594_ENG 10.2.13 9:46 AM Page 10 Filters (Sold Separately) You can attach filters to the filter mounting thread on the front of the lens. • Only one filter may be attached. • Use a polarizing Canon filter (72mm). • To adjust the polarizing filter, first remove the lens hood.
PAGE 12
02-7594_ENG 10.2.13 9:46 AM Page 11 9. Extension Tubes (Sold Separately) You can attach extension tube EF12 II or EF25 II for magnified shots. The shooting distance and magnification are shown below. Magnification (×) Focusing Distance Range (mm) EF12 II EF25 II 28mm 135mm 28mm 135mm Close distance 180 336 169 280 MF mode is recommended for accurate focusing. Long distance 196 1624 174 876 PY O C Close distance 0.53 0.37 1.09 0.58 Long distance 0.42 0.09 0.94 0.21 10.
PAGE 13
02-7594_ENG 10.2.13 9:46 AM Page 12 Specifications Focal Length/Aperture: 28–135 mm f/3.5–5.6 Lens Construction: 12 groups, 16 elements Minimum Aperture: f/22-36 Angle of View (Diagonal, vertical, horizontal extents): 75–18°, 46–10°, 65–15° Min. Focusing Distance: 0.5 m/19.7 in. Max. Magnification: 0.19× Field of View: 125 × 188 mm/4.9 × 7.4 in. (at 135 mm, 0.5 m/19.7 in.) Filter Diameter: 72 mm Max. Diameter and Length: 78.4 × 96.8 mm/3.1 × 3.8 in.