Startup Manual Read this manual thoroughly before using this scanner. Keep this manual in a safe place for future reference.
CANON ELECTRONICS INC. 1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN CANON U.S.A. INC. ONE CANON PLAZA, LAKE SUCCESS, N.Y.11042, U.S.A. CANON CANADA INC. 6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59-61, P.O.BOX 2262, 1180 EG AMSTELVEEN, THE NETHERLANDS CANON LATIN AMERICA, INC. 6505, BLUE LAGOON DRIVE, SUITE 325 MIAMI, FLORIDA 33126 U.S.A. CANON AUSTRALIA PTY. LTD. 1 THOMAS HOLT DRIVE, NORTH RYDE, SYDNEY. N.S.W, 2113. AUSTRALIA CANON SINGAPORE PTE.
The International ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are office equipment such as computers, monitors, printers, fax machines, copiers and Scanners.
Preface Thank you for purchasing the Canon DR- 3060/3080C scanner. Be sure to read this manual thoroughly before using the scanner in order to ensure that you fully understand how to use the scanner correctly. After you have read this manual, retain it for future reference.
Notational Conventions The symbols and indications used in this manual are explained below. Familiarize yourself with these symbols and their meanings before reading this manual. “(→ page 12)” means “Refer to page 12 for more details on the information.” WARNING This indicates a matter in which failure to follow proper procedure could result in loss of life or serious injury. In order to ensure safe operation, always observe these warnings.
Table of Contents Preface ........................................................................................................... 1 Notational Conventions .............................................................................. 2 Table of Contents .......................................................................................... 3 Before Using the Unit ................................................................................... 5 To Ensure Safe Operation ............................
Using the Scanner ....................................................................................... 30 Documents ............................................................................................... 30 Setting Up the Paper Feed Tray and the Document Eject Tray ................ 31 Installing the Document Eject Guide ........................................................ 33 Loading a Document for Scanning ...........................................................
Before Using the Unit To Ensure Safe Operation In order to ensure safe operation, be certain to read the cautions described below. Installation Location At least 4 in. (100 mm) 14.8 in. (375 mm) when paper feed tray and paper feed tray extension are closed 25.8 in. (655 mm) when paper feed tray and paper feed tray extension are open The performance of this unit is affected by the environment in which it is installed.
● Avoid locations that are subject to rapid temperature changes. Condensation inside of the unit can result in inferior image quality. Use this unit under the following environmental conditions: Temperature: 10 degree C to 32.5 degree C Humidity: 20% to 80% RH ● Avoid locating the unit near equipment that generates electromagnetic fields, including speakers, televisions, and radios. Power ● Before you plug the power cord into an outlet, be sure that the power source meets the requirements of the unit.
Notes on Normal Handling WARNING To avoid fire and electric shock, always observe the following warnings when using this unit. ■ Do not place flammable chemicals, such as alcohol or paint thinner, near the unit. ■ Do not cut, damage, or modify the power cord. Do not place heavy objects on the power cord, do not pull on the power cord, and do not bend the power cord sharply. ■ Do not plug in or unplug the power cord with wet hands. ■ Do not multi-outlet adapters to connect multiple devices to one outlet.
CAUTION ■ Do not set the unit up on a wobbly platform, a sloped surface, or any other type of unstable location. Do not set up the unit in a location that is subject to vibration. The unit could injure someone if it falls or tips over. ■ Do not block the ventilation openings. Doing so could cause the unit to overheat, creating a risk of fire. ■ Do not place any liquid container, such as a glass or a flower vase, on top of the unit.
Features of the DR-3060/3080C The main features of the DR-3060/3080C scanner are listed below. ■ Fast document feeding Although the scanner is compact, it can rapidly scan up to forty A4 sheets (double side) per minute, and can scan documents ranging in size from business cards to B4 paper. ■ Gray scale support (DR-3060) Documents can be scanned in 256-level gray scale. ■ Color/Gray scale support (DR-3080C) Documents can be scanned in 24-bit color or 256-level gray scale.
■ Text enhanced mode The scanner is equipped with a "text enhanced" mode that allows you to clearly scan text printed on a dark background, and text that is written in faint pencil. (This function is implemented by the ISIS/TWAIN driver.) ■ "Skip blank page" function The scanner is equipped with a "skip blank page" function that allows it to scan a document regardless of whether every page is double-sided or single-sided. (This function is implemented by the ISIS/TWAIN driver.
Checking the Packing List The contents of the carton in which this unit is shipped are described below. If anything is missing or damaged, contact your dealer or service representative. ➀ Document eject guide ➁ Auxiliary paper support plate ➂ Warranty card (120V model only) ➃ Setup disc (CD-ROM) ➄ Startup manual (this manual) ➅ Software license agreement ➆ Scanner ➇ Power cord • You will need to purchase an interface cable separately.
Removing Protective Tape and Protective Sheet Before using the scanner, remove the protective tape and protective sheet that protect the unit from damage during shipment. 1. Remove the protective tape that is attached to the exterior of the unit. 2. Open the paper feed tray and remove the protective tape that is inside the unit. 3. Gently raise the upper unit and remove the protective sheet. After removing the protective sheet, return the upper unit to its original position.
Names and Functions of Parts This section explains the name and function of each part. Familiarize yourself with the parts before connecting the scanner. ■ Front Paper feed tray Power indicator This indicator lights when the scanner is turned on. Power switch This switch is used to turn the scanner on. ■ Front (with cover open) Document eject tray extension This guide holds ejected documents. Paper feed tray Place the document to be scanned here.
■ Rear Ventilation holes Power cord connector Connect the power cord that is provided with the scanner here. SCSI connectors Connect a 50-pin half-pitch (pin type) SCSI cable connector here. DIP switches Use these switches to set the SCSI ID and to turn the terminator on/off. CAUTION Do not block the ventilation openings. Doing so could cause the unit to overheat, creating a risk of fire.
Installing the Scanner Requirements In order to install this scanner, you will need the following: ● PC ● SCSI interface cable (→ page 16) ● SCSI interface board Note ● Some application software may require a device driver that is different from the one that is provided on the setup disc. ● Make sure that the device driver and application software that you will be using are compatible with your PC, the system configuration, and the type of SCSI interface board that you are using.
Connecting the Scanner to Your PC Connect the DR-3060/3080C either directly to your PC or to a SCSI device daisy chain. Notes on the Shape of the Connector and the SCSI Interface Cable • The DR-3060/3080C is equipped with a 50-pin half-pitch (pin type) SCSI connector. • After checking the shape of the SCSI connector on your PC or on the SCSI device to which you will daisy chain the scanner, purchase a SCSI interface cable with the right combination of the appropriate connectors.
SCSI ID and Terminator Settings Use the DIP switches on the rear of the scanner to make the SCSI ID and terminator settings. For the DIP switches, the upper position is the ON position, and the lower position is the OFF position. Factor settings (Terminator: OFF; SCSI ID = 2) ON 1 2 3 4 SCSI ID switches Terminator ON/OFF switch SCSI ID Settings Refer to the following table when setting the SCSI ID.
Terminator Setting The terminator should be set to "ON" only in the SCSI device that is at the end of the SCSI daisy chain. If the scanner is the only SCSI device that is being connected to the PC, or if the scanner is being connected at the end of a daisy chain of SCSI devices, set bit 1 of the scanner's DIP switch (terminator) to ON, and disable terminator for all other SCSI devices.
Connecting the Power Cord Connect the power cord that is provided with this scanner to the power cord connector located on the rear of the scanner, and then plug the cord into a power outlet. Notice ● Only use the power cord that was provided with this unit. ● Always be sure to turn the power switch off before plugging in the power cord.
Turning the Power On/Off Follow the procedures described below when turning the power on and off. Turning the Power On 1. Turn on the scanner. The power switch is located on the lower right front corner of the scanner. To turn the scanner on, press the power switch. When the power indicator lights green, the scanner is on. 2. Turn on the PC.
● If you are using Windows 98, the “Add New Hardware Wizard” dialog box appears. 1. Click the Next button. 2. Select “Search for the best driver for your device. (Recommended).” and then click the Next button. 3. Load the setup disc into the computer’s CD-ROM drive. 4. Select “Specify a location”, type “D:\INF” (where “D” is the drive letter assigned to your CD-ROM drive) and then click the Next button. 5. Click the Next button. 6. Click the Finish button.
● If you are using Windows XP, the “Found New Hardware Wizard” dialog box appears. 1. Load the setup disc into the computer’s CD-ROM drive. 2. In the “Welcome to the Found New Hardware Wizard” screen, select “Install from a list or specific location (Advanced)”, and then click the Next button. 3. Select “Search for the best driver in these locations”, and then clear the “Search removable media (floppy, CD-ROM...)” check box.
Installing the Software The following software is included with the scanner. ● ISIS/TWAIN driver This driver allows this scanner to be used with ISIS-compatible application software or TWAIN-compatible application software. The driver must be installed in order to be able to use the scanner. ● CapturePerfect CapturePerfecr is an TWAIN-compatible application. Install this application if necessary.
Note ● The ISIS/TWAIN driver provided with the scanner is not necessarily compatible with all ISIS-compatible or TWAIN-compatible application software. For details, contact your application software dealer. ● Some functions described in this manual may not be supported by all application software. Installing the ISIS/TWAIN Driver Follow the procedure described below to install the ISIS/TWAIN driver.
3. Click the Start button and then click Run. The Run dialog box appears. 4. In the Open box, type "D:\Driver\Setup.exe" (where "D" is the drive letter assigned to your CD-ROM drive) and then click the OK button. The Installer starts. 5. Follow the onscreen instructions and complete the installation process.
Installing CapturePerfect Follow the procedure described below to install CapturePerfect. 1. Turn on your PC. Windows starts. Notice If you are using Windows NT 4.0 Workstation, Windows 2000 Professional, or Windows XP, be sure to log on as a user with administrator privileges. 2. Load the setup disc in the PC’s CD-ROM drive. 3. On the Start menu, click Run. The Run dialog box appears. 4. In the Open box, type “D:\CapturePerfect\Setup.
Using the Software Using the ISIS/TWAIN Driver The ISIS/TWAIN driver help file describes how to use the ISIS/TWAIN driver. To access the ISIS/TWAIN driver help file, click Start - Programs Canon DR-3060 & 3080C - Canon DR-3060 & 3080C Help, or click the Help button in the driver’s dialog box. Note The four files PATCH II (A4), PATCH II (LTR), PATCH T (A4), and PATCH T (LTR) contain patch code sheet data. For details, see "Patch Cpde Sheets"(→ page 40).
Using CapturePerfect Follow the procedure described below to start and close CapturePerfect. Note The basic method for scanning using CapturePerfect is described in the CapturePerfect help. From the Help menu on the CapturePerfect menu bar, click Help, then refer to the explanation of how to use CapturePerfect. Starting CapturePerfect 1. Turn on the scanner. 2. Turn on your computer. Windows starts. 3.
Closing CapturePerfect 1. On the File menu, click Exit. CapturePerfect closes. Notes When the scanner is scanning or some operation is pending after scanning has been started (such as when scanning has been interrupted), the mouse pointer changes to an hourglass. If the mouse pointer appears as an hourglass while the scanner is not scanning, the previous scanning operation has not been completed. On the File menu, click Cancel Scanning to cancel hourglass display, then close CapturePerfect.
Using the Scanner Documents This scanner is able to scan documents ranging in size from business cards and checks up to B4 size documents. The scannable size range is: Width: 2.2 in. to 10.1 in. (55 mm to 257 mm) When using the auto start function, 2.8 in. to 10.1 in. (70 mm to 257 mm) Length: 2.8 in. to 14.3 in. (70 mm to 364 mm) Thickness: 0.0024 in. to 0.0059 in. (0.06 mm to 0.15 mm) with automatic feed 0.0019 in. to 0.0079 in. (0.05 mm to 0.
Setting Up the Paper Feed Tray and the Document Eject Tray 1. Grasp the edge of the paper feed tray and lift it up. 2. Gently open the paper feed tray towards you. CAUTION Do not place anything other than documents, and especially not heavy objects, on the paper feed tray. The object could fall suddenly and injure someone, or the scanner itself could be damaged, which could result in lower image quality.
3. When scanning a large document, pull out the paper feed tray extension. 4. Grasp the edge of the document eject tray extension and lift it up. 5. Gently open the document eject tray extension towards you. Note ● Always be sure to open the document eject tray extension. If the guide is not open when a document is scanned, the scanned document could droop down and become jammed in the scanner. ● To close the trays and extensions, follow the above procedure in reverse.
Installing the Document Eject Guide When scanning a document that is particularly thin or particularly long, it could droop down over the edge of the document eject tray extension and become jammed in the scanner. Avoid this problem by attaching the document eject guide. 1. Grasp the edge of the document eject tray extension and lift it up. 2. Attach the Auxiliary paper support plate to the document eject tray extention. 3. Gently open the document eject tray extension towards you.
4. Attach the document eject guide to the document eject tray as shown in the illustrations. When doing so, align the ( mark on the scanner. ) mark on the guide with the ( ) 5. To remove the document eject guide, reverse the procedure described above. Note ● Although it is still possible to scan normal documents while the document eject guide is in place, the guide will cause stacking problems when scanning documents on paper that is thicker than normal.
Loading a Document for Scanning This scanner supports both automatic and manual feed operation. The methods for loading the document to be scanned when using automatic feed and manual feed are explained separately. Notice When loading a document for scanning, be careful to remove all paper clips, staples, etc., from the document. During the scanning process, such objects can tear the document, cause a paper jam, and damage the scanner. When Using Automatic Feed 1.
Note Make sure that the left edge of the document does not extend to the left of the mark. A paper jam may occur if you begin to scan a document that is positioned at this mark. B4 A4 LTR 4. Place the document on the paper feed tray so that the document is face up. Notice There are stacking limit marks ( ) indicated on the paper feed tray. Do not load pages in excess of this mark. (The mark is equivalent to a capacity of approximately 100 sheets of ordinary copier paper (80g/m2).
5. Adjust the paper side guides. Note Before starting a scan, make sure that the document is loaded in the scanner correctly. Scanning a curled document or a creased document can damage the document. 6. Perform the scanning operation in accordance with the normal operating procedure for your application software.
When Using Manual Feed 1. Get ready to perform the scanning operation with your application software, and set the manual feed function. Note When "manual feed" is set, the document feed opening next to the paper feed tray rises up, allowing you to feed pages in manually. The document feed opening remains in the upper position as long as "manual feed" is set; if "automatic feed" is set, the document feed opening descends. 2. Align the paper side guides with the width of the document that is to be scanned.
Note It may be difficult to manually feed a sheet that is unusually thin or that is curled. It may be necessary to gently hold down the edge of the sheet while feeding it into the scanner. 4. Perform the scanning operation in accordance with the normal operating procedure for your application software, and continue to manually feed sheets into the scanner, one at a time.
Patch Code Sheets Patch Code Sheets are sheets printed with a special pattern that is used for separating files without interrupting scanning. When a Patch Code Sheet is read on the scanner, and the pattern on the sheet is recognized, the sheet functions as a Patch Code Sheet, and a file separator is inserted. Note ● Here will briefly describe how to use the Patch Code Sheets. For details, also refer to the ISIS/TWAIN Driver Help.
Functions of Patch Code Sheets ● Patch code patterns PATCH T When this sheet is detected, a file separator is inserted after the document following this sheet. PATCH II When this sheet is detected, a file separator is inserted after this sheet. Note, however, that the setting is ignored, and this sheet is recorded as an image even if recording of sheets as an image has been disabled in the patch code detection settings. Using the Patch Code Sheets 1. First, print out the Patch Code Sheets by a printer.
Effective Area for Detecting Patch Code Patterns 5 Patch code pattern 5 5 94 (effective area for detecting patch code patterns) Unit: mm Notice ● When you copy the originals, adjust the size and density settings to match the original. Extremely dark or light copies may not scan correctly. ● When you copy the originals, adjust the original so that the patch code pattern is in the effective area for detecting patch code patterns. ● Make sure that the originals are not stained or marked in any way.
Clearing a Paper Jam If a paper jam occurs in the scanner, follow the procedure described below. CAUTION Be careful when removing jammed paper. It is possible to cut your hand on the edge of a sheet of paper. 1. If there are any ejected sheets already in the document eject tray, remove them. 2. Close the document eject tray extension. However, if the document eject guide is currently attached to the tray, it is not necessary to remove the document eject guide.
4. Raise the upper unit as far as it will go. 5. Remove the jammed paper inside of the scanner. When the jam occurred in the feed section When the jam occurred in the eject section Notice Do not pull hard on the jammed sheet; remove it gently. If the sheet does rip, be sure to remove all of the remaining pieces of paper.
6. Gently lower the upper unit to its normal position. 7. Gently push down on the top of the upper unit until the upper unit clicks into place. Note Once you have cleared the paper jam, check whether the scanned image on the last page has been stored properly or not, and then resume scanning.
Regular Maintenance Clean the scanner on a regular basis as described below in order to maintain peak scanning quality. CAUTION For safety's sake, always turn the unit off and unplug the power cord before cleaning this unit. Cleaning the Scanner To clean the exterior of the scanner, dampen a cloth with water or a mild detergent, wring the cloth out thoroughly, and then wipe the dirt away. Then use a dry cloth to wipe away any moisture.
Cleaning the Scanning Glass and the Rollers 1. Turn the power off and unplug the power cord from the power outlet. 2. If the document eject tray extension is open, close it. 3. Grasp the upper unit and gently lift it up as far as it will go. 4. Wipe the scanning glass (the shaded portion ■ in the illustration) with a clean, dry cloth. CAUTION There is scanning glass on the top and on the bottom. Wipe both clean. Do not spray the glass directly with water or mild detergent.
Troubleshooting This section describes common problems that may occur while you are using the scanner, and how to resolve them. Refer to the troubleshooting section related to the problem that you have encountered. The scanner does not turn on ..................................................... P.48 The PC does not recognize the scanner ..................................... P.49 Images are not scanned ............................................................... P.51 Documents do not feed properly .....
✘ The PC does not recognize the scanner The following are possible causes of the PC failing to recognize the scanner. Check each possible cause. Cause The scanner is not connected correctly. Action Check all of the SCSI cable connections between the scanner, the SCSI host adapter in the PC, and any other SCSI devices connected to the system. Cause The SCSI host adapter is not installed in the PC correctly.
50 Cause The scanner's SCSI ID is identical to the SCSI ID of another device. Action Check the SCSI IDs of all SCSI devices connected to the system and set a unique SCSI ID for the scanner. Cause The terminator is not set correctly. Action Connect a terminator to the SCSI device that is at the end of the SCSI daisy chain. If the SCSI device has a built-in terminator function, enable the terminator. Cause The PC was turned on before the scanner.
✘ Images are not scanned Check the following if the scanner does not scan an image even though the scanning operation is being performed: ● Is the scanner connected to the PC correctly? ● Has the scanner driver been installed? ● Has the application software been installed correctly? Has the application software been set up correctly? ● Is there a problem in the PC system? Notice If the scanner will not respond at all due to a system error, turn the scanner off, wait at least 10 seconds, and then turn the sc
✘ Resulting scanned images are not correct If the resulting scanned images are not crisp, if there are lines or spots on the image, or if there is some other problem with a scanned image, likely causes are listed below. Check each item and take the appropriate action. Cause The scanning glass or the rollers inside the scanner are dirty. Action Clean the scanning glass and rollers as described on page 47. Cause The application software is not set up properly for scanning.
Specifications Type Scanning document size Document feeding method Scanning method Light source Scanning side Scanning modes DR-3060 Desktop color image scanner Width: 2.2 in. to 10.1 in. (55 mm to 257 mm) When using the auto start function, 2.8 in. to 10.1 in. (70 mm to 257 mm) Length: 2.8 in. to 14.3 in. (70 mm to 364 mm) Thickness: 0.0024 in. to 0.0059 in. (0.06 mm to 0.15 mm) with automatic feed 0.0019 in. to 0.0079 in. (0.05 mm to 0.
Amount of paper that can be stacked in automatic feeder Interface Other functions Dimensions (with trays closed) Dimensions (with trays open) Weight power supply Power consumption Noise Operating environment 10 mm stack, maximum SCSI-II Automatic document thickness adjustment 7.5 x 13.5 x 10.9 in. (H x W x D) 191 x 344 x 278 mm (H x W x D) 9.6 x 13.5 x 21.9 in. (H x W x D) 244 x 344 x 555 mm (H x W x D) Approximately 8.
Index C CapturePerfect 23, 28 Install 26 Cleaning glass 47 main unit 46 rollers 47 Connection interface cable 16 power cord 19 terminator 18 D DIP switches position 14 setting 17 Document eject guide attachment 33 Document eject tray extension opening 32 position 13 Document positioning mark adjustment 35 position 13 Documents feeding 35 paper jam 43 stacking limit marks 36 DR-3080C cleaning 46 functions of 9 moving 6 I P Paper jam cleaning 43 Paper side guides adjustment 35 position 13 Patch Code Sheets
MEMO 56 MEMO
