Instructions

ManualsBrandsCanon ManualsInterchangeable LensCanon CT1-B076-B Interchangeable Lens

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

CT1

B076B

CT1-B076-B

PRINTED

TAIWAN

Canon

Interchangeable

Lens

Instructions

These instructions describe important safety notes for Canon

interchangeable lenses* and basic instructions on how to

handle those lenses. For more detailed information, refer to

the Instructions for each lens. Instructions for your lens can

be downloaded from the Canon website below:

*EF (EF-S) lenses, EF-M lenses, RF lenses

https://cam.start.canon/

[!]

Refer also to the instructions for the camera.

Be sure the latest version firmware

installed

the camera.

Warning

Details pertaining to risks that may result

death

or serious injury.

• Do not look directly at the sun or other strong light

sources through a lens or a single-lens reflex camera

with a lens attached. This may result in loss of sight.

• Do not leave a lens in the sun without the lens cap

attached. The lens may concentrate entering sunlight and

cause a malfunction or fire.

• Do not point a lens at the sun. Even when the sun does

not appear

the screen , the lens may concentrate entering

sunlight and cause a malfunction or fire.

• Where the lens is equipped with a fixed tripod mount and

the lens

mounted on a camera, make sure to properly

support the lens.

you hold only the camera, the lens may

fall off the camera and cause a malfunction or injury.

• Where the lens is equipped with a detachable tripod

mount, ensure that the tripod mount is securely attached

to the lens body. If the tripod mount is not secure, the lens

may fall off the tripod mount and cause a malfunction or

injury.

Caution

Details pertaining to risks that may result in injury

or damage to other objects.

• Do not leave the product in places exposed to extremely

high or low temperatures. The product may cause burns or

injury when touched.

• Do not insert your hand or fingers into the product. This

may result in injury.

• When using lenses equipped with Macro Lites, do not

hold the Macro Lites close to the eyes or stare at them

when they are illuminated. Doing so may result

eye

damage.

• Only mount the product on a tripod that

sufficiently

sturdy.

Attaching and Detaching a Lens

Attaching the Lens

Align the lens mount indexes on the lens and the camera body and

then turn the lens clockwise.

Detaching the Lens

Hold down the lens release button

the camera and turn the lens

counterclockwise.

Refer to the camera's instructions for details

attaching and

detaching a lens.

Shooting Using Autofocus (AF)

•

shoot

images

using

autofocus,

set

the

focus

mode

•

shoot

images

using

manual

focus,

set

the

focus

mode

and

focus

turning

the

focusing

ring.

To set the focus mode, use the focus mode switch on the lens

(AF/MF), or set it on the camera ([AF/MF]).

Using the Image Stabilizer

•

use

image

stabilization,

set

the

Image

Stabilizer

ON.

To set image stabilization, use the Image Stabilizer switch on

the lens (ON/OFF) , or set it on the camera ([ON/OFF]) .

Attaching a Lens Hood

Align the hood with the edge of the lens and turn the hood

clockwise to attach it.

Using the Control Ring

This only applies to RF lenses equipped with a control ring.

To use the control ring on a lens equipped with a focusing/

control ring, set

the

tocusinglcon!rol

se,'ectar

sw1\t1\-

ur,

,l'M'

,iel!lf

,\5'

CONTROL, or set it on the camera.

Refer to the camera's instructions for information

using the

control ring.

Nomenclature

Lens mount index

@ Focus mode switch

@ Focusing ring

@ Zoom ring

® Image stabilizer switch

® Image stabilizer mode selector switch

MODE

Corrects vibrations

all di

ctions.

MODE 2: When you take a panning shot either horizontally or

vertically, corrects vibrations at right angles

the

direction of panning.

MODE

Corrects vibration only during exposure.

(1)

Focusing distance range selector switch

Selects the focusing distance range.

@Tripod mount (fixed-mount type)

Used to attach a tripod or monopod.

®Tripod

mount (detachable tripod type)

Used to attach a tripod or monopod.

@ Lens-retraction switch

Push the switch in the

,._

direction while turning the ring

set

the lens to the ready position.

@ Lock release switch

Push the switch

the

,._

direction while turning the ring to set

the lens to the ready position.

@ Macro Lite

button

Used to change the Macro Lites illuminated patterns.

@ Macro Lites

Illuminate the subject

@ Lens cap

@ Dust cap

@ Hood (bayonet type)

@ Hood (screw type)

@ Control ring

@ Focusing/control selector switch

® Focusing/control ring

Ca11011

2m-

FUL11~

(GD

CONTROL

FOC

p)J

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If

such changes or modifications should be made , you could

required to stop operation of the equipment.

This equipment has been tested and found

comply with the limits for a class B digital device, pursuant

part 15 of the FCC Rules.

These limits are designed

provide reasonable protection against harmful interference

a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used

accordance with the instructions, may cause harmful interference to radio communications.

However, there

no guarantee that interference will not occur

a particular installation.

this equipment

does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and

, the user is encouraged

try

correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer

an experienced ra_dio_

_V_ t_ec_h_ni_cia_n_fo_r_h_

_p.

_______

___

Summary of content (9 pages)

PAGE 1
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII CT1 B076B CT1-B076-B © CANON INC. 2018 PRINTED IN TAIWAN Ca11011 Canon Interchangeable Lens Instructions These instructions describe important safety notes for Canon interchangeable lenses* and basic instructions on how to handle those lenses. For more detailed information, refer to the Instructions for each lens. Instructions for your lens can be downloaded from the Canon website below: *EF (EF-S) lenses, EF-M lenses, RF lenses - https://cam.start.
PAGE 2
RF24-50mm F4.5-6.3 IS STM Specifications Lens Focal Length 24-50mm Maximum and Minimum Aperture f/4.5 - f/6.3 Lens Mount Type RF Mount Compatible Cameras Canon EOS R-series, full-frame and APS-C (focal length equivelant to approx.38-80mm when used on an APS-C camera) Minimum Focusing Distance 0.3m (11.8 in.) at 24mm; 0.35m (13.8 in.) at 50mm Maximum Magnification 0.11x (at 24mm); 0.19x (at 50mm) Field of View, at Minimum Focus Distance Approx. 309 × 206mm (12.2 x 8.1 in.
PAGE 3
Distance Scale Yes • Distance scale available in EVF or Live View LCD screen of compatible EOS R-series cameras Distance Limiter Switch None Dust / Weather Resistant Construction None Dimensions, Weight Maximum Outer Diameter x Length Approx. ø2.7 in.(ø69.0mm) x 3.7 in. (Wide); 5.3 in. (Tele) Weight Approx. 9.5 oz. / 0.6 lb.
PAGE 4
Ca..,...o·fl -, ' . Dealer·R_ e cord·:oft,C~.n on Purchase Fiche,.d'Achat Qur .c ncess'i o_ n nijire· Canon ~• • 11CT1B021A 111 Complete this card at time of sale.
PAGE 5
CANON U.S.A., INC. CANON CANADA INC. NAME NOM ADDRESS ADRESSE CITY VILLE PROVINCE THESE ARE NOT REGISTRATION CARDS - Retain for your Records CES CARTES NE SONT PAS GELLES POUR ~ENREGISTREMENT. - Les conserver comme reference. DEALER'S NAME & ADDRESS MARCHAND NOM & ADRESSE POSTAL CODE CODE POSTAL MODEL MODELE BODY NO. BOITIER NO RF24-50 /4.5-6.
PAGE 6
Canon CANON®EF Lens and Accessories Limited WarrantyFor U.S.A. & Canada Only The limited warranty set forth below is given by Canon U.S.A., Inc. (Canon U.S.A.) in the United States or Canon Canada, Inc. (Canon Canada) in Canada with respect to the Canon brand EF Lens, as well as with respect to the accessories packaged with this limited warranty (collecllvely the "Products"), when purchased and used in the United States or Canada. The Products are the only Products to which this limited warranty apphes.
PAGE 7
Canon U.S.A. You may obtain technical support for your Products as follows: • Internet support at www.usa.canon.com/support (E-mail support also available) • Telephone assistance from a Canon U.S.A. Customer Care representative free of charge during regular business hours at 1-800-OK-CANON (1-800-652-2666). Canon Canada You may obtain technical support for your Products as follows: • Internet support for English at www.canon.
PAGE 8
Register Now! Visit www.registercanon.com to register your new EF & EF-S Lenses today and receive the following: • • • • I Telephone support* E-mail support* Product protection* Receive information on new products and promotions* There is no charge to register or for the benefits offered. * These benefits valid in the U.S. only. Please read the Terms and Conditions at www.registercanon.com for complete details. For accessories and other supplies visit www.estore.usa.canon.
PAGE 9