ENGLISH EDITION SERVICE MANUAL CANON DIGITAL CAMERA MENU GENERAL INFORMATION REPAIR INFORMATION PARTS CATALOG ELECTRIC DIAGRAMS Digital Imaging Products Service Dept.
PowerShot G1 SERVICE MANUAL C83-1004
Application This manual has been issued by Canon Inc. for qualified persons to learn technical theory, and repair of products. This manual covers all localities where the products are sold. For this reason, there may be information in this manual that does not apply to your locality. Corrections This manual may include typographical errors or technical inaccuracies due to improvements or changes in the products.
GENERAL INFORMATION 1 2 3 4 5 6 Product Strategy .................................. G1 1-1 Background to commerciarize .......... G1 1-2 Product Objectives ........................... G1 1-3 Product Concept .............................. G2 Overview ............................................. G4 2-1 Features .......................................... G4 2-2 Design Concept ............................. G15 Exterior .............................................. G16 3-1 External Photos ...............
1. Product Strategy 1-1 Background to commerciarize The compact digital camera market got a big break and reached a major plateau with the emergence of 2-megapixel models. The market is expected to henceforth divide into two major directions: High-end models with more pixels and more sophisticated features, and popular models with around 2-megapixels and more refined features.
1-3 Product Concept The PowerShot G1 is the top-of-the-line PowerShot camera standing on the five pillars of full features, high image quality, operation ease, system accessories and application software. It is a high-end, compact digital camera targeting advanced amateurs and semi-professionals. (The reference pages are in brackets.) Full Features -Manual settings (aperture-priority AE, shutter speed-priority AE, manual focus, manual exposure, flash exposure compensation, exposure compensation) [New! p.
Operation Ease -Vari-angle LCD monitor [p.G10] -New UI for easy-to-read controls (Omni selector, stacked two mode dials, large display panel) [New! p.G10] -Switching between picture-taking and playback [New! p.G10] -Switchable AF mode (Continuous/Single) [New! p.G10] -Switchable video output format (NTSC/PAL) [New! p.G10] - Optical viewfinder with dioptric correction [p.G11] -Shutter-release sound like a film-based camera [New! p.
2. Overview 2-1 Features [Full Features] -Manual settings For the exposure control, the PowerShot G1 has the aperture-priority AE and shutter speed-priority AE modes. With aperture-priority AE, you set the desired aperture and the camera sets the shutter speed automatically to match the subject brightness. Setting a large aperture increases the background blur which better isolates the subject in the foreground.
The camera’s auto focus system brings the object into focus, then the focus is locked by pressing the MF button. This allows the user to release his or her finger from SW1. Focus Locks at SW1. Unlocks when SW1 is released. M anual Locks with M F button. Focus Unlocks when M F button is pressed again. Focus Locks at SW1.>>Unlocks when SW1 is released. Lock Locks at SW1 and keep to lock at M F button>> Unlocks when M F button is pressed again. AE Locks with AE lock button. Locks at SW1.
-Movie recording and playback The PowerShot G1 can record a QVGA (320X240 pixels) video clip (with audio) at 15 frames per second up to approximately 30 sec. The movie can be played back on the built-in LCD monitor or on a TV monitor. The movie is ideal for studying the subject’s movement or to record a sequence. The movie is compressed with Motion JPEG and saved as an AVI file. Motion JPEG compresses each frame of the video in JPEG format.
-Macro mode allows close-up photography up to 6cm at the wide-angle end, 20cm at telephoto end. PowerShot G1 allows you to perform close-up photography up to 6cm from the subject at the wide-angle end. The maximum shooting area is 82X60mm at the wide angle end and 84X62 mm at the telephoto end. If you attach the optional close-up lens with macro mode, the shooting area is 50X38 mm at the telephoto end.
-High-resolution zoom lens with advanced optical technologies The PowerShot G1 is equipped with a 7 - 21mm 3X zoom lens (equivalent to 34 - 102mm in 35mm format) that is suited for a wide range of picture-taking, from landscapes to snapshots. Also, the maximum aperture is f/2.0-2.5 which is the largest for a digital still camera. The iris-type aperture can give excellent background blur for portraits. The lens consists of 8 elements in 7 groups (Fig. 2-4).
-New RAW mode Canon has greatly improved the RAW application employed in the PowerShot A series, developing the PowerShot G1’s New RAW mode. The advantage of RAW modes is that they allow users to obtain original image data, since image data is recorded to memory from the CCD without any image processing. With RAW mode images, users can process images as they desire, setting and changing the parameters, “developing”*1 the RAW data into an image., setting and changing the parameters.
[Operation Ease] Shooting children or indoor shooting. -Vari-angle LCD monitor Like the PowerShot Pro70, the PowerShot G1 is Shooting equipped with a vari-angle LCD monitor (1.8-inch)* . subjects. The monitor can be rotated so you can shoot from various angles. Normal Shooting sports Also, when the LCD monitor is rotated toward shooting. or documentaries. the front (for self-shooting), the monitor displays a mirror image so you can see yourself correctly. Fig. 2-6 Sample uses of the vari-angle LCD monitor.
-Optical viewfinder with dioptric correction Usually, a camera’s viewfinder diopter is set to match the nearest and farthest distances that the eyes of most people can clearly see. However, for near-sighted, far-sighted, and presbyopic users, dioptric correction is necessary to see such objects clearly. The PowerShot G1’s optical viewfinder enables dioptric correction to suit various eyesights of users.
-Higher capacity Li-Ion battery The PowerShot G1 utilizes a rechargeable lithium-ion battery (BP-511). This lithium battery has about the same capacity, yet half the weight per volume as the nickel-hydride battery used by the PowerShot A-series and S-series cameras. And it has no memory effect. Model PowerShot G1 IXY DIGITAL PowerShot A/S As the BP-511 is already being used in other Item Li-Ion Li-Ion Ni-MH products such as the EOS D30 and the Voltage/Capacity 7.4V/1100mAh 3.7V/680mAh 6.
-New power source The PowerShot G1 uses a rechargeable lithium-ion battery (BP-511). Also, with Compact Power Adapter CA-560 (provided), the camera can be powered by a household power outlet. And with the Charge Adapter/Car Battery Cable Kit CR-560 (sold separately), the camera can be powered by a car battery in case you run out of battery power on the road. The BP-511 can be charged in the camera body by using the Compact Power Adapter CA-560.
-Photorecord 1.2 for easy layout and printing of many pictures. PhotoRecord 2.1 (for Windows only) enables text to be inserted anywhere in the image. You can also select the text frame and easily layout and print out image. And using the PhotoRecord 1.2 together with the new Extension DDI driver, designed for the new BJ printer due out, allows for the automatic layout of a user’s images on borderless, perforated paper* (paper due out at same time as Extension DDI).
-RS-232C TWAIN Driver 3.4/USB TWAIN Driver 3.4/Plug-in Module 3.4/ZoomBrowser EX 2.4/ImageBrowser 1.4 for adjusting image quality parameters. The PowerShot G1 provides the RAW mode to enable white balance, contrast, sharpness, and color saturation adjustments with the RS-232C TWAIN Driver 3.4/USB TWAIN Driver 3.4/Plug-in Module 3.4/ZoomBrowser EX 2.4/ImageBrowser 1.4. The previewer enables you to preview the image retouching you make.
3.
3-2 6-dimensional Views 119.3 (4.7) 63.8 (2.5) 115.9 (4.6) 52.7 (2.1) 76.8 78.9 (3.0) (3.1) 72.8 (2.9) 119.7 (4.7) 123.1 (4.8) Wide side : 39.3 (1.5) Tele side : 39.53 (1.56) Middle : 34.7 (1.4) Unit : mm (in.) *This figure is prototype.
3-3 Nomenclature and Functions Main Dial Hot shoe Mode Dial Display Panel Continuous/Self-timer/ Wireless Controller Button Shutter Button Ring Zoom Lever Viewfinder Indicators Spot Metering/Enlarge Button Macro/JUMP Button Diopter Adjustment Lever Flash/Multi Button Omni Selector MENU Button SET Button AE Lock/FE Lock Button LCD Monitor Exposure/White Balance/AEB/ Flash Exposure Compensation Button DISPLAY Button Remote Sensor Optical Viewfinder Window Built-in Flash Strap Eyelet MF(Manual
● Display Panel Red-eye Reduction icon Single shot/Continuous shot icon Flash ON/OFF icon Spot Metering icon Wireless Controller icon Shutter Speed/Movie Shooting time display Aperture Setting display Manual Focus icon AE lock/FE Lock icon Battery Charge State icon JPEG compression icon Self-timer icon Resolution icon Information display RAW icon Custom White Balance display White Balance icon (Auto/Preset) AEB icon Macro Mode icon Exposure Compensation level/AEB level/ Flash Exposure Compensat
4.
G21 Macintosh Windows Digital Printer CD-300 CF Type I/II CF Slot Hot Shoe SPEEDLITE 220EX 380EX 420EX 550EX Li-Ion Battery BP-511 A/V OUT DC IN 9.
5. Specifications 5-1 Specifications -Reading format -Chip size -Total pixels -Effective pixels Interline 8.10 (H) X 6.64 (V) mm (0.3 X 0.2 in.) equivalent to 1/1.8-inch Approx. 3.34 million (2,140 (H) X 1,560 (V)) Approx. 3.24 million (2,088 (H) X 1,550 (V)) -Focal length -f/number -Focusing range (Measured from top of lens Macro barrel) -Lens construction 7 (W) - 21 (T) mm (34 (W) - 102(T) mm 35mm film equivalent) 2.0 (W) - 2.5 (T) Normal AF : 70 cm (2.3 ft.) -infinity AF : 6 (0.2 ft.
-Operation modes -Flash range -Recycling time -Flash exposure compensation Auto, Red-eye reduction auto, Red-eye reduction ON, ON or OFF 0.7 - 4.5 m (W)/0.7 - 3.6 m (T) (When sensitivity is set to ISO100 equivalent) 10 sec. or shorter (full flash, battery voltage=7.4 V) +/- 2.0EV (at every 1/3-stop) -Flash contacts -Compatibility -Flash exposure compensation Sync-terminals at accessory shoe Canon SPEEDLITE 220EX, 380EX, 420EX, 550EX +/- 2.
-Playback modes -Magnify -Vertical and horizontal conversion -Erasing modes -Computer I/F -A/V out -LED (Upper LED) -LED (Lower LED) -Power sources -Power current consumption Single, Multi (9 thumbnail images), Magnification or Slide show Approx. 2.5X or 5X on built-in LCD monitor Vertical and horizontal conversion can be set on each image. (Both LCD and Video Out play an image according to setting.
-Shooting capacity LCD ON BP-511 : Approx. 260 images LCD OFF BP-511 : Approx. 800 images Canon’s standard conditions of measuring shooting capacity are as follows: Normal temperature (23 Celsius degrees). LCD viewfinder is ON. Shoot images at wide angle end and at telephoto end alternately with 20 seconds intervals. Use flash at every 4-time shootings. Turn camera off and on at every 8-time shootings. -Playback time BP-511: Approx. 160 min.
[Parameter availability by modes] Shooting mode Green Size WB Flash Drive Quality Digital zoom AE+/AEB EF+/Macro 0 else 0 else 0 else Auto else Red-eye Auto Red-eye ON OFF Ext Single Cont.
5-2 System requirements (Canon Digital Camera Solution Disk 2.0 is required for installing software) [Microsoft Windows®95, Windows®98, WindowsNT® 4.0 and Windows® 2000] -Computer Model IBM PC/AT or compatible -OS Microsoft Windows® 95, Windows® 98 (including Second Edition), Windows® Me, Windows NT® 4.0 (Service Pack 3 or higher) and Windows® 2000 -CPU Pentium 133MHz or better. (Windows Me : Pentium 150 MHz or better) -RAM 32MB RAM minimum for Windows 95 and Windows 98.
PowerShot G1 PowerShot PRO90 IS NB-6N NB-5H NB-4H NB-1L BP-511 X X X X O X X X X O for PS 600, 600N for PS A, S series for PS Pro70 for IXY DIGITAL/DIGITAL IXUS/PS S100 DIGITAL ELPH for Video Camera FV-2, FV-10 CB-15N CA-PS100/100E CA-PS200 CA-PS300 CB-2L/2LE CA-560 CR-560 X X X X X O O X X X X X O O for PS 600, 600N for PS A, S series for PS Pro70 for IXY DIGITAL/DIGITAL IXUS/PS S100 DIGITAL ELPH for IXY DIGITAL/DIGITAL IXUS/PS S100 DIGITAL
PowerShot G1 PowerShot PRO90 IS Note
5-3 Main accessory specifications -Magnification : Approx. 0.8X -Focal length : infinity -Lens construction : 3 groups 3 pieces -Focusing range : 10mm (0.03 ft.) -infinity (on maximum wide angle, measured from front lens) -Dimension : Length : 40.2mm (1.6 in.) Maximum diameter : 80.0mm (3.1 in.) -Weight : 157g (5.5 oz) -Attaching to the camera : 58mm standard filter screw 59.5 ( 2.3) 80.0 (3.1) 2.5 (0.1) 37.7 (1.5) (The LA-DC58 is required to attach the Fig.
- RCA pin plug-L plug - See Fig. 5-4 for the dimensions. 1500+/-100 (59.1+/- 4.0) 150+/-30 (6.0+/- 1.2) 60 (2.4) Yellow Black Fig. 5-4 AV Cable AVC-DC100 dimensions (mm (in.)) -Type -Nominal voltage -Nominal capacity -Charging time (Adequate charge for use) -Operating Temperature -Operating humidity -Dimensions (W X H X D) -Weight : Lithium-ion secondary battery : DC 7.4 V : Approx. 1,100 mAh : Approx. 80 min.
-Input voltage : DC 9.5 V -Input current : DC 2.5A 2.7A (DC 9.5V, while charging the battery pack) -Nominal output : Battery terminals : DC 8.4V 1.6A (while charging the BP-511) DC OUT terminals : DC 8.4V 1.6A (with the adapter) -Charging detection : Voltage/current detection by a microprocessor -Charging time : BP-511: Approx. 80 min. -Charging indications : No Battery Pack attached : Off Battery Pack charging : Flashing in red 36 (1.
6. Operation 6-1 Operating Procedures -Set the main dial to “Shooting mode” and set the mode dial to “Auto. ” -Frame the subject and press the shutter button. -Using the Optical ViewfinderLook through the optical viewfinder, frame the subject, then press the shutter button halfway. The Indicator will light in green and the beep will sound twice. Then press the shutter button completely to take the picture.
-Press the MACRO button and use the Optical viewfinder or LCD monitor to frame the subject, then press the shutter button halfway. The macro indicator lights yellow. -The camera operation when the shutter button is pressed halfway and completely is the same as with “Basic picturetaking.” -In Macro mode, LCD monitor is recommend for avoid parallax.
-Set the Mode Dial to a Creative Zone mode. -AE lock takes effect at SW1 or when the AE lock/FE Lock button is pressed while there is no other camera operation. FE is locked in Flash mode is set. -During AE lock, the image is captured at SW1 and SW2. < Spot metering (Creative Zone modes only.)> -Set the Mode Dial to a Creative Zone mode. -The spot metering button toggles between spot metering and center-weighted averaging metering.
-Set the main dial to “Play mode.” -Press the Index button to to switch from Single to Multi. In Multi mode, to display 3X3 thumbnail images. The lower right thumbnail is the latest one. Press the JUMP button to switch JUMP mode. In single play, press the Omni Selector (LEFT/RIGHT) to jump 9 images ahead or back. In Multi mode, press the Omni Selector (LEFT/RIGHT) to jump next or previous page. Press the SET+[LEFT] or SET+[RIGHT] to jump the last or first image in both modes.
-In the play mode, press the MENU button to display the Play Menu. -Select "Single Erase" or "Erase All", then press the SET button. -When Single Erase has been selected, the image displayed before the Play Menu appeared will be displayed. Press the Omni Selector to select the image to be erased. Then press the SET button. A confirmation message will be displayed. Select "OK" and press the SET button. If "Erase All" is selected, the confirmation message will appear immediately.
REPAIR INFORMATION 1 Troubleshooting ................................... R1 1-1 When an Error Code is Displayed .... R1 1-2 When a Problem Occurs .................. R3 2 Disassembly and Assembly ................. R5 2-1 Required Tools ................................ R5 2-2 Procedure ........................................ R5 2-3 Removal of Main Parts/Units ............ R6 2-4 Disassembly of Main Units ............. R29 3 Adjustments .......................................
1 Troubleshooting 1-1 When an Error Code is Displayed [Remedy] • Check for any abnormalities in the mounting of probable faulty parts or connector connections referring to the table below. • Try replacing probable faulty parts referring to the table below. [NOTE] • The error code is displayed on the Display Panel (B/W LCD PANEL). • Adjustments must be performed after the part has been replaced. For details, see “3 Adjustments.
Error Code E23 Name CF NO SPACE Occurrence Conditions Cause and Probable Faulty Part * Numbers in parentheses ( ) are the symbols on the most probable circuit component. When the CF becomes full during See Page R15,E1,E2 writing of photographed images to CF, writing is repeatedly performed with the JPEG compression ratio successively increased to reduce the size of the image file until it can be success- MAIN PCB ASS’Y(IC121) fully written to CF.
1-2 When a Problem Occurs [Remedy] • Check for any abnormalities in the mounting of probable faulty parts or connector connections referring to the table below. • Try replacing probable faulty parts referring to the table below. [NOTE] • Adjustments must be performed after the part has been replaced. For details, see “3 Adjustments.” Problem (when an error code is not displayed) The camera does not work.
Cause and Probable Faulty Part Problem (when an error code is not displayed) The External Flash does not fire. * Numbers in parentheses ( ) are the symbols on the most probable circuit component. See Page TOP MODULE UNIT(IC1/CN1) R44,E5,E6 ACC. SHOE FPC R38,E11,E12 ACC. CONTACT UNIT R39 ACC. SHOE PIN R36 ACC.
2 Disassembly and Assembly 2-1 Required Tools DESCRIPTION Screwdriver Tweezers Soldering iron Solder Steel wire ADHESIVE TAPE (ADHESIVE TAPE, SONY T4000) DIA BOND NO.1663 (BOND, DIA BOND NO. 1663 BLACK) CEMEDINE SUPER X (BOND,CEMEDINE SUPER X BLACK) THREE BOND 1401C (BOND,THREE BOND 1401C ) LOGENEST RAMBDA A-74 (LUBE,LOGENEST RAMBDA A-74 ) PARTS NO.
2-3 Removal of Main Parts/Units 2-3-1 FRONT COVER UNIT STEP1 Remove the screws. a X2 b X1 b a X2 STEP2 Remove the screws. b X2 STEP3 Remove the FRONT COVER UNIT. b b STEP4 Bleed the capacitor. Warning-High Voltage! Do not touch the CAPACITOR terminal . Be sure to bleed the capacitor by the discharge resistor (approx. 1kΩ/5W). CAPACITOR terminal a : CD1-3280-000 (M1.7mm, L3.5mm, Self-Tap, Gray Metallic) b : CD1-3277-000 (M1.7mm, L3.
FRONT COVER UNIT STEP5 Remove the FRONT RING.
2-3-2 REAR COVER UNIT STEP1 Remove the screws. c X2 d X1 d c x2 STEP2 Remove the screws. c X1 e X1 STEP3 Remove the REAR COVER UNIT. c e STEP4 Remove the SELECTOR SPRING. c : CD1-3278-000 (M1.7mm, L3.0mm, Black) d : CD1-3279-000 (M1.7mm, L4.0mm, Gray Metallic) e : XA4-9170-409 (M1.7mm, L4.
STEP5 Remove the screws. h X2 h x2 STEP6 Remove each of the parts. REAR COVER UNIT LCD LOCK STOPPER LCD LOCK SPRING LCD LOCK SLIDER h : XA4-9170-359 (M1.7mm, L3.
2-3-3 SIDE COVER STEP1 Remove the JACK COVER. STEP2 Remove the screws. c X1 c JACK COVER STEP3 Remove the SIDE COVER. SIDE COVER c : CD1-3278-000 (M1.7mm, L3.
2-3-4 TOP UNIT STEP1 Disconnect the flex. Warning ! g x2 a Disconnect the flex in the direction of the arrow. Otherwise, the connector may be damaged. STEP2 Remove the screws. a X1 g X2 STEP3 Disconnect the flex. STEP4 Remove the TOP UNIT. TOP UNIT a : CD1-3280-000 (M1.7mm, L3.5mm, Self-Tap, Gray Metallic) g : XA1-7170-167 (M1.7mm, L1.
2-3-5 CF COVER STEP1 Remove the screws. h X2 h x2 STEP2 Remove the CF CLICKING SPRING1 and CF CLICKING SPRING2. STEP3 Remove the CF COVER. CF COVER CF CLICKING SPRING2 CF CLICKING SPRING1 h : XA4-9170-359 (M1.7mm, L3.
2-3-6 FLASH/SPEAKER UNIT STEP1 Disconnect the cables. i STEP2 Remove the screw. i X1 STEP3 Disconnect the cable. STEP4 Remove the screw. i X1 i STEP5 Remove the FLASH/SPEAKER UNIT. FLASH/SPEAKER UNIT i : XA1-7170-307 (M1.7mm, L3.
2-3-7 JACK PCB ASSY STEP1 Disconnect the flex. STEP2 Remove the screws. i X2 i i STEP3 Remove the JACK PCB ASS’Y. JACK PCB ASS’Y i : XA1-7170-307 (M1.7mm, L3.
2-3-8 MAIN PCB ASSY STEP1 f Remove the screw. f X1 STEP2 Remove the MAIN SHEET. MAIN SHEET STEP3 Disconnect the cables and the flex. STEP4 Remove the screw. f X1 f MAIN PCB ASS’Y STEP5 Remove the MAIN PCB ASS’Y. STEP6 Remove the screw. g X1 MAIN SHEET STEP7 g Remove the MAIN SHEET. f : FC2-8736-000 (M1.55mm, L2.5mm) g : XA1-7170-167 (M1.7mm, L1.
2-3-9 REAR PLATE UNIT STEP1 i Disconnect the cables. STEP2 Remove the screws. h X3 i X1 h x3 STEP3 i Remove the screws. g X1 i X1 g STEP4 Disconnect the flex adhered by double-sided tape. A At Assembly Affix double-sided tape to the rear side. A : 5mm x 5mm B : 2mm x 5mm B g : XA1-7170-167 (M1.7mm, L1.6mm) h : XA4-9170-359 (M1.7mm, L3.5mm, Self-Tap, Black) i : XA1-7170-307 (M1.7mm, L3.
STEP5 Remove the REAR PLATE UNIT.
2-3-10 FINDER UNIT STEP1 j x3 Remove the screws. j X3 STEP2 Remove the FINDER UNIT. FINDER UNIT At Assembly For details on how to assemble the FINDER UNIT and OPTICAL UNIT, see the following page. j : XA4-9170-407 (M1.7mm, L4.
Assembling the FINDER UNIT and OPTICAL UNIT STEP1 OPTICAL UNIT Line Y Rotate the gear with your finger, and align line X on the lens barrel with line Y on the cam ring. Line X Line Y Line X STEP2 FINDER UNIT Rotate the gear with your finger in the direction of the arrow to the limit.
STEP3 Rotate the gear by about 7/8 of a turn from the state in STEP 2 to align holes A and B. Hole B Hole A STEP4 Pass the 1.2 mm dia. wire through holes A and B to lock the gear. * During this operation, look through the FINDER to make sure that the lens is at the WIDE end. Hole B Another FINDER UNIT Hole A 1.2 mm dia. wire Shaft Remove the shaft (1.2 mm dia.) from another FINDER UNIT for use instead of the wire.
2-3-11 OPTICAL UNIT STEP1 Remove the screws. k X2 k x2 STEP2 Remove the screws. k X1 k STEP3 Remove the OPTICAL UNIT. OPTICAL UNIT k : XA1-7170-407 (M1.7mm, L4.
STEP4 LENS PLATE (Adhesive) Remove the LENS PLATE.
2-3-12 CF UNIT STEP1 Remove the screws. g X2 l X2 l x2 g x2 PUSH STEP2 Remove the CF UNIT. CF UNIT g : XA1-7170-167 (M1.7mm, L1.6mm) l : XA4-9170-609 (M1.7mm, L6.
2-3-13 BATTERY BOX UNIT STEP1 Remove the CF PLATE. CF PLATE (Aadhesive) STEP2 Remove the screws. e X2 e x2 STEP3 Remove the BATTERY BOX UNIT. e : XA4-9170-409 (M1.7mm, L4.
2-3-14 LCD/HINGE UNIT STEP1 Remove the screws. i X2 i x2 LCD/HINGE UNIT i : XA1-7170-307 (M1.7mm, L3.0mm) R25 STEP2 Remove the LCD/HINGE UNIT.
2-3-15 SUB FRAME STEP1 Remove the screws. i X3 i x3 STEP2 Remove the SUB FRAME. STEP3 Remove the screws. i X2 i x2 SUB FRAME MINI FRAME* i : XA1-7170-307 (M1.7mm, L3.0mm) R26 * The MINI FRAME is not included in the SUB FRAME (CD1-3253-000).
2-3-16 DC/DC CONVERTER PCB ASSY STEP1 Remove the screws. i X3 i x3 STEP2 Remove the DC/DC CONVERTER PCB ASS’Y. STEP3 Remove the VID FPC. VID FPC* * The VID FPC is not included in the DC/DC CONVERTER PCB ASS’Y (CM1-1076-000). DC/DC CONVERTER PCB ASS’Y i : XA1-7170-307 (M1.7mm, L3.
2-3-17 TRIPOD BASE STEP1 Remove the screws. i X3 i x3 STEP2 Remove the TRIPOD BASE. MAIN FRAME TRIPOD BASE i : XA1-7170-307 (M1.7mm, L3.
2-4 Disassembly of Main Units 2-4-1 TOP UNIT 2-4-1-1 Disassembling the B/W LCD UNIT and DIAL/COVER UNIT STEP1 g x4 Remove the screws. g X4 h X2 h x2 B/W LCD UNIT STEP2 Disassemble the DIAL/COVER UNIT and B/W LCD UNIT. DIAL/COVER UNIT At Assembly The DIAL/COVER UNIT and B/W LCD UNIT must be assembled with the MAIN DIAL BRUSH, MODE DIAL BRUSH, MAIN DIAL and MODE DIAL rotated in the direction of the arrows to the limit. Outer side MAIN DIAL BRUSH Inner side MODE DIAL BRUSH g : XA1-7170-167 (M1.
2-4-1-2 DIAL/COVER UNIT 1) ZOOM LEVER etc. STEP1 SELF TIMER BUTTON Remove the SELF TIMER BUTTON. STEP2 Remove the ZOOM BRUSH Claw ZOOM BRUSH STEP3 Remove the screws. g X2 g x2 g : XA1-7170-167 (M1.7mm, L1.
STEP4 ZOOM SPRING Remove the ZOOM SPRING STEP5 Remove the E RING ZOOM LEVER E RING RELEASE SPRING R31
RELEASE CAP At Assembly Glue with DIA BOND. RELEASE BUTTON 2) MODE DIAL etc. STEP1 h Remove the screw. h X1 STEP2 Remove the MODE CONNECTIVE PLATE. At Assembly Set the MODE DIAL to “ M ” and attach the MODE CONNECTIVE PLATE at the position shown in the photograph on the left. MODE CONNECTIVE PLATE h : XA4-9170-359 (M1.7mm, L3.
STEP3 Remove the MODE DIAL. MODE DIAL MODE DIAL PLATE MODE DIAL At Assembly Apply a coat of DIA BOND. STEP4 Remove the MODE CLICK SPRING.
STEP5 Remove the MAIN DIAL. MAIN DIAL STEP6 Remove the MODE CLICK SPRING. MODE CLICK SPRING At Assembly Apply a coat of LOGENEST LAMBDA A-74 to the sliding surfaces of the MODE DIAL and MAIN DIAL.
3) ACC. SHOE etc. STEP1 i Remove the screw. i X1 STEP2 Remove the ACC. DETECT BASE2. ACC. DETECT BASE2 STEP3 Remove the ACC. DETECT PLATE. ACC. DETECT PLATE i : XA1-7170-307 (M1.7mm, L3.
STEP4 ACC. SHOE PIN Remove the ACC. SHOE PIN. STEP5 ACC. DETECT BASE1 Remove the ACC. DETECT BASE1. STEP6 Insert tweezers under the ACC. SHOE SPRING. Warning ! Take care not to scratch parts.
STEP7 Remove the ACC. SHOE SPRING. At Assembly Apply a coat of DIA BOND. ACC. SHOE SPRING STEP8 Remove the screws. m X4 mx4 At Assembly After tightening the screws, apply a coat of THREE BOND 1401C to these screws. ACC. SHOE m : XA1-3170-407 (M1.7mm, L4.
4) ACC. SHOE FPC etc. STEP9 Remove the screw. h X1 h STEP10 Remove the ACC. SHOE FRAME. STEP11 Remove the solder. ACC. SHOE FRAME STEP12 Remove the ACC. SHOE FPC. ACC. SHOE FPC h : XA4-9170-359 (M1.7mm, L3.
STEP13 ACC. CONTACT UNIT Remove the ACC. CONTACT UNIT.
2-4-1-3 B/W LCD UNIT 1) MAIN DIAL BRUSH etc. STEP1 Remove the E RING. E RING MODE BASE PLATE STEP2 Remove the MODE BASE PLATE.
STEP3 Remove the MAIN DIAL BRUSH and MODE DIAL BRUSH. MODE DIAL BRUSH MAIN DIAL BRUSH STEP4 MODE DIAL FRAME Remove the MODE DIAL FRAME.
2) B/W LCD PANEL etc. STEP1 Remove the two B/W LCD CLIPs. Claw Claw B/W LCD CLIP x 2 STEP2 Remove the B/W LCD PANEL. At Assembly Align the protruding section on the B/W LCD PANEL with the indent on the B/W LCD HOLDER.
STEP3 Remove the two CONTACT RUBBERs. At Assembly CONTACT RUBBER direction CONTACT RUBBER CONTACT RUBBER x 2 STEP4 Remove the B/W LCD HOLDER. B/W LCD HOLDER STEP5 Remove the sections adhered by double-sided tape. At Assembly A Affix double-sided tape to the rear side.
STEP6 Remove the TOP MODULE UNIT.
2-4-2 FLASH/SPEAKER UNIT 1) SPEAKER UNIT etc. SPEAKER BUSH STEP1 Remove the SPEAKER BUSH. At Assembly Apply a coat of DIA BOND. STEP2 SPEAKER UNIT Remove the SPEAKER UNIT. At Assembly Cut the double-sided tape to the following dimension for use.
2) AF LED FPC etc. h STEP1 Remove the screw. X1 FLASH UNIT STEP2 STEP3 Disconnect the flex section. At Assembly Apply a coat of DIA BOND. h : XA4-9170-359 (M1.7mm, L3.
STEP4 AF LED LEAD Remove the solder from the cables. RED BLACK AF LED FPC AF LED LENS AF LED HOLDER At Assembly Apply a coat SEMEDYNE SUPER X to the part indicated [ ].
2-4-3 REAR PLATE UNIT 1 )MIC .UNI Tetc. STEP1 Remove the MIC. HOLDER. STEP2 Remove the FLASH IC HOLDER. At Assembly Cut the double-sided tape to the following dimension for use. 5mm x 5mm MIC. HOLDER FLASH IC HOLDER STEP3 Remove the solder from the cables. RED BLACK MIC.
2) BUTTON PCB ASSY STEP1 i x2 Remove the screws. X2 STEP2 Remove the SEL. BUTTON BASE. STEP3 A Remove the sections adhered by double-sided tape. At Assembly B Affix double-sided tape to the rear side. A : 5mm x 10mm B : 5mm x 10mm C : 5mm x 10mm C BUTTON PCB ASS’Y REAR FRAME i : XA1-7170-307 (M1.7mm, L3.
2-4-4 BATTERY BOX UNIT 1) BATTERY COVER STEP1 Open the BATTERY COVER. STEP2 Rotate the BATTERY COVER to the side. STEP3 BATTERY COVER DATE BATTERY HOLDER R50 Remove the BATTERY COVER.
2) BATTERY LOCK SWITCH etc. STEP1 Remove the screw. n X1 n STEP2 Remove the solder from the cables. BATTERY LOCK SWITCH BLACK RED SUB LEAD1 3) BATTERY LOCK OPENER etc. STEP1 Remove the screw. h X1 h h : XA4-9170-359 (M1.7mm, L3.5mm, Self-Tap, Black) n : XA4-9200-657 (M2.0mm, L6.
BATTERY COVER LOCK STEP2 BATTERY LOCK SPRING Remove each of the parts. BATTERY COVER OPENER At Assembly Apply a coat of LOGENEST LAMBDA A-74 to the sliding surfaces. 4) BATTERY EJECT SPRING etc. STEP1 Remove the screws. l X2 Claw l x2 STEP2 Remove the BATTERY BOX COVER. BATTERY BOX COVER l : XA4-9170-609 (M1.7mm, L6.
STEP3 Remove the BATTERY EJECT SPRING. BATTERY EJECT SPRING 5) POWER LEAD etc. RED(POWER LEAD) BLACK(DATE LEAD) STEP1 Remove the solder from each of the cables.
2-4-5 LCD/HINGE UNIT STEP1 Remove the LCD PLATE. STEP2 LCD PLATE (Adhesive) Remove the screws. c X2 c x2 STEP3 Remove the screws. c X2 c x2 STEP4 Remove the LCD TOP COVER. c : CD1-3278-000 (M1.7mm, L3.
STEP5 Remove the screw. i X1 i STEP6 Disconnect the cables. STEP7 Remove the HINGE UNIT. i : XA1-7170-307 (M1.7mm, L3.
STEP8 Remove the screws. c X2 c x2 STEP9 Remove the HINGE COVER. HINGE COVER HINGE UNIT STEP10 Remove the screw. i X1 i c : CD1-3278-000 (M1.7mm, L3.0mm, Black) i : XA1-7170-307 (M1.7mm, L3.
STEP11 Remove the NUT PLATE. NUT PLATE STEP12 Remove the LCD FRAME COVER. LCD FRAME COVER STEP13 Disconnect the flex.
STEP14 Remove the LCD PANEL. LCD PANEL At Assembly Be sure to remove the protective sheet attached to service parts. STEP15 Remove the solder. STEP16 Remove the LCD PCB ASS’Y.
LCD PCB ASS’Y LCD SHEET BACK LIGHT UNIT R59
3 Adjustments 3-1 Replacement Parts and Adjustment Items PowerShot G1 requires electrical adjustments when certain parts are replaced. The table below indicates the adjustments required for the respective part replacements. For all other parts not listed below, no electrical adjustments are necessary after replacement.
3-2 Adjustment Tool The following tools are required for electrical adjustment. DESCRIPTION PC/AT-Compatible Machine (Windows98 pre-installed Model, USB port) Adjustment Software (CD-ROM) Compact Power Adapter CA-560 PARTS NO.
3-3 Before Starting Electrical Adjustment 3-3-1 TW AIN Driver Installation Install the PowerShot G1 USB Driver to PC. (“Imaging Process Adjustment” is impossible when the RS-232C TW AIN driver is used.) 3-3-2 Installing the Adjustment Software q Double click : \AdjustmentSoftware \ PowerShot G1 \ English* \ Setup.exe \ , in this CD-ROM. *When you perform the adjustment in the U.S.A., double click the Setup.exe in the “USA” folder. w When the dialog box below appears, click the “OK” button.
3-3-3 Preparation Before starting up the Adjustment Software, follow the preparatory steps below: q w Obtain all the tools necessary for the adjustment. For the LCD Adjustment, jot down the numeric value written on the data-sheet of LCD PCB ASS’You will need it later. e For the “Language Setting”, jot down the setting of the language and the video output type. You will need it later. (Refer to 3-5-6.Language setting) r Connect the Camera to the Power Source with the Compact Power Adapter CA-560.
3-3-4 Precautions for Connecting to a USB Port After completing the preparatory steps, use Explorer and double click C:\Program Files\PowerShot G1\PSG1.exe\ 3-3-5 Menu Window When the Adjustment Software starts up, the Menu Window below will appear. 3-3-6 How to Use the Adjustment Software ■ Calibration/Adjustment For starting, click the button related with adjustment. * Whenever you use your light source for the adjustment for the first time, besure to click the “Imaging Cal.” Button.
3-4 Calibration 3-4-1 Imaging Calibration ■ Tools Used Reference Camera (Merchandise) • Compact Power Adapter CA-560 • Adjustment Software • Color Bar Chart • 1 2 3 Personal Computer INTERFACE CABLE IFC-200PCU • Color Viewer (5600° K) • W-10 Filter (2pcs.) • • Click the “Imaging Cal.” button. When the message on the right appears, check that the reference camera (Marchandise) is connected to the computer. Click the “OK” button. When the message on the right appears, go to 4.
4 q Place the camera so that the lens is set Color Viewer against the center part of the Color Viewer via the two W-10 filters. ˇ Click the “ADJUST” button. w W-10 Filter CAMERA BODY Power Source Stand Personal Computer 5 When the message on the right appears go to 6. 6 ı Remove q the Filters from the Color Viewer. ˇ Place the camera so that the lens is set w against the center part of the Color Viewer. e Click the “ADJUST” button.
8 q Attach the Color Bar Chart to the Color Viewer . w Place the camera so that the lens is set gently against the “Red” part of the Color Bar Chart. e Click the “ADJUST” button. Color Viewer Color Bar Chart CAMERA BODY Power Source Stand Personal Computer 9 q When the message on the right appears, place the camera so that the lens is set gently against the “Yellow” part of the Color Bar Chart. w Click the “ADJUST” button. 10 When the message on the right appears, click the “FINISH” button.
3-4-2 Flash Calibration ■ Tools Used • Reference Camera (Merchandise) • INTERFACE CABLE IFC-200PCU • Tripod 1 Click the “Flash Cal.” button. 2 q w 3 • Personal Computer • Adjustment Software When the message on the right appears, check that the reference camera (Merchandise) is connected to the computer. Click the “OK” button. When the message on the right appears, go to 4.
4 q Place the 18% Gray Chart 57cm away from the finder of camera front. w Make the room as dark as a darkroom. e Click the “ADJUST” button. 18% Gray Chart 57cm Power Source Personal Computer 5 q When the message on the right appears, click the “FINISH” button.(This ends the “Flash Cal.”.) w Turn the room light back on.
3-5 Adjustment Procedure 3-5-1 CCD Adjustment ■ Tools Used • Personal Computer • INTERFACE CABLE IFC-200PCU • Brightness Box (light source A) • Compact Power Adapter CA-560 • Adjustment Software • C-12 Filter 1 Click the “CCD”button. 2 When the message on the right appears, Go to 3. 3 q Place the camera so that lens is set against the light source surface of the Brightness Box via the C-12 Filter. w Set the Brightness Box to EV12. e Click the “ADJUST” button.
4 When the message on the right appears, click the “FINISH” button. (This ends the “CCD” Adjustment.
3-5-2 Optical Unit Adjustment ■ Tools Used • Personal Computer • INTERFACE CABLE IFC-200PCU • Auto Focus Chart • Compact Power Adapter CA-560 • Adjustment Software • Tripod 1 Click the “Optical Unit”button. 2 When the message on the right appears, go to 3. 3 q Place the Auto Focus Chart 47cm away from the finder of camera front. * Place the Auto Focus Chart on a plain color wall or equivalent. * Adjust the light so that the brightness of the chart will be about EV8.5.
4 When the message on the right appears, click the “FINISH” button. (This ends the “Optical U.” Adjustment.
3-5-3 Imaging Process Adjustment ■ Tools Used • Personal Computer • INTERFACE CABLE IFC-200PCU • Brightness Box (light source A) • Light-Shielding Cloth • Compact Power Adapter CA-560 • Adjustment Software • W-10Filter (2 pcs.) • Color V iewer (5600° K) 1 Click the “Imaging Process” button. 2 When the message on the right appears, go to 3. 3 q Place the camera so that lens is set against the light source surface of the Brightness Box . w Set the Brightness Box to EV12. e Click the “ADJUST” button.
4 When the message on the right appears, go to 5. 5 q Place the camera so that lens is set against the center of the Color Viewer via the two W-10 Filters. w Click the “ADJUST” button. Color Viewer W-10 Filter CAMERA BODY Power Source Stand Personal Computer 6 When the message on the right appears, go to 7. 7 q Remove the W-10 filters. Color Viewer w Place the camera so that the lens is set against the center part of the Color Viewer. CAMERA BODY e Click the “ADJUST” button.
8 When the message on the right appears, go to 9. 9 q Attach the Color Bar Chart to the Color Viewer . w Place the camera so that the lens is set gently against the “Red ”part of the Color Bar Chart. e Click the “ADJUST” button. Color Viewer Color Bar Chart CAMERA BODY Power Source Stand Personal Computer 10 When the message on the right appears, place the camera so that the lens is set gently against the “Yellow” part of the Color Bar Chart. w Click the “ADJUST” button.
12 Remove the Color Bar Chart from the Color Viewer. w Place the camera so that lens is set against the center of the Color Viewer. e Click the “ADJUST” button. q Color Viewer CAMERA BODY Power Source Stand Personal Computer 13 q When the message on the right appears, cover the camera with the Light-Shielding Cloth so that the no light reasons the CCD. w Click the “ADJUST” button. 14 When the message on the right appears, click the “FINISH”button. (This ends the “Imaging Process” Adjustment.
3-5-4 LCD Adjustment ■ Tools Used • Reference Camera (Merchandise) • Personal Computer • Compact Power Adapter CA-560 • INTERFACE CABLE IFC-200PCU • Adjustment Software • CF card • Color Bar Image in “AUT_0001.jpg” 1 Click the “LCD” button. 2 q When the message on the right appears, en- ter in the text boxes the data written on the data-sheet is attached with LCD PCB ASS’Y w Click the “ADJUST” button.
<< Data Sheet of LCD PCB ASS’Y >> The data of the data-sheet attached with LCD PCB ASS’Y has varieties (Adjustment-Value, defaultValue or none). [2] BRIGHT [3] CONTRAST [1] H_AFC S for Service Parts [4] R_BRIGHT [5] B_BRIGHT Depending on this information, the method of “ LCD adjustment” varies when LCD PCB ASS’Y or MAIN PCB ASS’Y is replaced. For details, please refer the table below. Classification of the use of LCD PCB ASS’Y.
■ Fine Adjustment of [4]R-BRIGHT and [5]B-BRIGHT q Copy the “Dcim” folder (in the folder of CD-ROM, : \ AdjustmentSoftware \ PowerShot G1\ ) to the unrecorded CF root directory. w Insert the CF card to the Reference Camera. e Set the Reference Camera in play mode, and display “Color Bar Image”. r Comparing a Color Bar displayed on a camera whose LCD is being adjusted with a Color Bar displayed on the Reference Camera, conduct fine-adjustment with adjustment value of [4]R_BRIGHT and [5]B_BRIGHT.
3-5-5 Flash Adjustment ■ Tools Used • Personal Computer • INTERFACE CABLE IFC-200PCU • 18% Gray Chart • Compact Power Adapter CA-560 • Adjustment Software • Tripod • Speedlite 380EX 1 Click the “Flash” button. 2 When the message on the right appears, go to 3. 3 q Attach “Speedlite 380EX” on the camera, and 18% Gray Chart turn it on. Set 18% Gray Chart 57cm from the Finder on camera front. e Make the room as dark as a darkroom. r Click the “ADJUST” button. w 57cm Ext.
5 q When the message on the right appears, click the “FINISH” button. (This ends the “Flash” adjustment.) w Turn the room light back on.
3-5-6 Language setting Unlike the conventional PowerShot Series (incl. IXY DIGITAL), the PowerShot G1 can select the video output system (NTSC/PAL). (The video output system is not settable with the Adjustment Software.) On the other hand, the user cannot select the indication language of the LCD, as it is already prepared for each destination as below.
3-5-7 Checking of sound recording/output It is not required to adjust the recording/output (volume, etc.) of sound. Check the camera if the sound is recorded/play-backed properly.
PARTS CATALOG
PowerShot G1 No.
PowerShot G1 No.1 Parts List SYMBOL NEW PARTS NO.
PowerShot G1 No.
PowerShot G1 No.2 Parts List SYMBOL NEW 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 * 13 * 14 * 15 * 16 * 17 * 18 * 19 * 20 * 21 * 22 * 23 * 24 * 25 * 26 * 27 * 28 * 29 * 30 * 31 * 32 * 33 * 34 * 35 36 37 38 * PARTS NO.
PowerShot G1 No.
PowerShot G1 No.3 Parts List SYMBOL NEW 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 PARTS NO.
PowerShot G1 No.
PowerShot G1 No.4 Parts List SYMBOL NEW 1 * 2 * 3 * 4 * 5 * 6 * 7 PARTS NO. CD1-3213-000 CD1-3212-000 CM1-1056-000 CD1-3187-000 CM1-1083-000 CD1-3186-000 XA1-7170-307 CLASS Q’TY C 1 C 1 C 1 C 1 C 1 C 1 F 2 DISCRIPTION HOLDER, MICROPHONE COVER, FLASH IC MICROPHONE UNIT BASE, SEL.
PowerShot G1 No.
PowerShot G1 No.5 Parts List SYMBOL NEW 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 13 14 * PARTS NO.
PowerShot G1 No.
PowerShot G1 No.6 Parts List SYMBOL NEW 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 PARTS NO.
PowerShot G1 No.7 Accessories 1 3 Neck Strap NS-DC100 Lens Cap 1 N.S. * 2 1 N.S. * 4 Wireless Controller WL-DC100*1 Battery Pack BP-511*2 1 N.S. * Compact Power*2 Adapter CA-560 PLUG TYPE 6 5 JPN N 9 8 7 E *1 N.S.
PowerShot G1 No.7 Parts List SYMBOL NEW 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * PARTS NO.
PowerShot G1 No.8 Accessories 2 1 1 N.S. * Charge Adapter/Car Battery Cable Kit CR-560*2 3 4 FRONT CAP REAR CAP 1 N.S. * Wide Converter WC-DC58*2 5 N.S. 4 FRONT CAP REAR CAP *1 Tele Converter TC-DC58*2 *1 N.S.
PowerShot G1 No.8 Parts List SYMBOL NEW 1 * 2 * 3 * 4 * 5 * PARTS NO.
PowerShot G1 No.9 Accessories System Map 1 Solution DISK CD-ROM Language : 10 Japanese 11 English 12 French 13 Spanish Adobe Photoshop LE CD-ROM 1 N.S. * Camera User Guide Language : 2 Japanese 3 English 4 French 5 Spanish Software Starter Guide Language : 6 Japanese 7 English 8 French 9 Spanish *1 N.S.
PowerShot G1 No.9 Parts List SYMBOL NEW 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 * 13 * PARTS NO.
PowerShot G1 No.
PowerShot G1 No.10 Parts List SYMBOL NEW 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * PARTS NO. DY9-3008-000 CY9-8118-000 CY9-8011-000 CY9-8102-000 CY4-6012-000 CY4-6016-000 DY9-2029-000 CY9-1543-000 CY8-4368-031 CLASS Q’TY Y 1 Y 1 Y 1 Y 1 Y 1 Y 1 Y 1 Y 1 Y 1 DISCRIPTION BOND, DIA BOND NO.
PowerShot G1 No.
PowerShot G1 No.11 Parts List SYMBOL NEW 1 * 2 * PARTS NO.
ELECTRIC DIAGRAMS 1 PATTERN DIAGRAMS ......................................... 1-1 MAIN PCB ASS'Y .......................................... 1-2 LCD PCB ASS'Y ............................................ 1-3 TOP MODULE UNIT ..................................... 1-4 BUTTON PCB ASS'Y .................................... 1-5 JACK PCB ASS'Y .......................................... 1-6 CF UNIT ......................................................... 1-7 ACCESSORY SHOE FPC .............................
1 PATTERN DIAGRAMS 1-1 MAIN PCB ASS’Y I IC114 RTC SW100 LCD Monitor Open/Close DETECTION SW H X100 X’tal (CPU) IC113 CPU G IC121 Digital Signal Processor F E IC134 FLASH ROM X101 X’tal (NTSC) IC122 CDS/AD D X102 X’tal (PAL) IC110 RS232C Driver C B (COMPONENT SIDE) A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
I IC103, IC107 Filter/Buffer IC132, IC133 SDRAM H IC106 Audio/Video IC G IC105 Power SW IC (for Digital Signal Processor/CF) IC100 EVR F E IC117 Focus/Zoom motor Driver D IC116 IG Driver IC127 TG C B (SOLDERING SIDE) A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
1-2 LCD PCB ASS’Y IC102 LCD Driver I H G IC103 Ope. Amp.
I H G F E D C (SOLDERING SIDE) B A 1 2 3 4 E4 5 6
1-3 TOP MODULE UNIT I LED2 Orange LED1 Green H G F E D C B A (COMPONENT SIDE) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 E5
I H G F E D C B A (SOLDERING SIDE) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 E6
1-4 BUTTON PCB ASS’Y I SW10 CF Cover Open/Close DETECTION SW H TH1 Thermistor G F E D C IC1 FLASH Control IC B A (COMPONENT SIDE) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 E7
I H G F E D C B A (SOLDERING SIDE) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 E8
1-5 JACK PCB ASS’Y I H G (COMPONENT SIDE) F E D C (SOLDERING SIDE) B A 1 2 3 4 E9 5 6
1-6 CF UNIT I H G F E D C B A 1 2 3 4 E10 5 6
1-7 ACCESSORY SHOE FPC I H G F E D C B (COMPONENT SIDE) A 1 2 3 4 E11 5 6
I H G F E D C B (SOLDERING SIDE) A 1 2 3 4 E12 5 6
1-8 DC/DC CONVERTER PCB ASS’Y I H G IC01 Battery Charge Control IC F E D C B A (COMPONENT SIDE) 1 2 3 4 E13 5 6
I H IC02 DC/DC Converter G F E D F01, F02 Fuse C B A (SOLDERING SIDE) 1 2 3 4 E14 5 6
INTERCONNECTION DIAGRAM ACC.
CONNECTORS MAIN PCB ASS’Y MAIN PCB ASS’Y CN102 LCD PCB ASS’Y BUTTON PCB ASS’Y CN100 MAIN PCB ASS’Y CN1 CN100 1 2 LCD_BRT LCD_21V 1 2 EF_XGND AVEF 1 2 Vlitium MATSW(7) 3 4 GND LCD_12V 3 4 EF_STOP EF_ID 3 4 MATCOM(1) MATSW(8) 5 6 LCD_5V LCD_15V 5 6 EF_CCC EF_X 5 6 MATCOM(3) MATSW(6) 7 8 VDD0 GND 7 STRB_SW 7 8 MATSW(1) MATSW(4) 9 10 MATSW(3) MATSW(2) 11 12 MATSW(5) DAC2 13 14 CF_OPEN XTRIG 15 16 BAT_OPEN THRM 17 18 MIC_IN GND 19 20 DAC1 STSP CN101 1 2 CSV CSH 3 4
3 BLOCK DIAGRAMS 3-1 OVERALL DATA COMMUNICATION ANALOG IMAGE SIGNAL ANALOG AUDIO SIGNAL OPTICAL UNIT MAIN PCB ASS’Y CCD FPC BAT OPEN CF OPEN TH1 ACC. SHOE FPC VDD2_15V VDD2_–75V MIC BUTTON PCB ASS’Y REMOTE LCD ROTATION DETECT SW CCD SENSOR T.G. LCD PCB ASS’Y FLASH Control IC VIDEO OPT FPC KEY L.P.F. LCD CONTROL Sens Vcc ACC. SHOE ADC LCD PANEL M Zoom MOTOR CPU MOTOR DRIVER VBAT BUTTON BATTERY M Focus MOTOR IG FPC VDD0 BACK LIGHT UNIT TH100 VDD2_5V +4.
3-2 MAIN PCB ASS’Y (1/3) DATA COMMUNICATION ANALOG IMAGE SIGNAL IC121 Digital Signal Processing IC (1/2) F712521A MAIN PCB ASS’Y (1/3) VCCA-1 OPTICAL UNIT Q122 BUFFER 2SC3938 CCD FPC +15V IC122 CDS_AD AN2104N C239 C238 IC127 TG CXD2497R CN107 VOUT IC1 CCD SENSOR ICX252AMY V1A V1B V2 V3A V3B V4 SUB CSUB H1-1 H1-2 H2-1 H2-2 PG VDD VL 10 5 6 4 2 3 1 16 17 14 19 13 20 12 11 18 20 VOUT 16 17 15 3 14 2 8 7 10 5 11 4 12 13 6 V1A V1B V2 V3A V3B V4 SUB CSUB H1 H1 H2 H2 PG VDD VL C281 41 43 39 44 46 40
3-3 MAIN PCB ASS’Y (2/3) DATA COMMUNICATION ANALOG IMAGE SIGNAL ANALOG AUDIO SIGNAL BUTTON PCB ASS’Y CN1 EF_XGND STRB_SW EF_CCC EF_ID EF_STOP AVEF EF_X 12 BCLK 14 SCLK 16 MOSI 19 MISO 18 CSEF0 17 CSEF1 TH1 THERMISTOR CN104 V-litium GND 2 1 BUTTON BATTERY 2 1 LCD_SEG27 a b 6 1 4 2 SET MENU DISP WR 3 MATCOM_3 5 REMOTE 35 MIC_IN 17 MIC_GND 18 BAT_OPEN 15 CF_OPEN 13 16 THRM 1 V-litium 7 10 9 8 11 6 2 4 MTSW_1 MTSW_2 MTSW_3 MTSW_4 MTSW_5 MTSW_6 MTSW_7 MTSW_8 MATCOM_1 22 VCPU Q113 SW XP03312
3-4 MAIN PCB ASS’Y (3/3) DATA COMMUNICATION ANALOG IMAGE SIGNAL ANALOG AUDIO SIGNAL MAIN PCB ASS’Y (3/3) 2 D_0 D_1 5 IC106 A V Amp. BH6401KV 35 VMIC 32 MICIN 4 MOUT 27 1 2 SP+ SP– VIDEO LINE A/V D0 211 4 LPF VTRIN 25 POWER IN 24 MECAOUT 17 POUTL 15 POUTR 8 VOUT 22 AUDIOOUT C144 C140 3 7 5 IC112 5 +3.0V REG MM1385HN 4 1 167 TH100 4 BAT_SENSE EX23 265 ADIN3 264 ADIN4 149 ADIN6 301 ADIN7 Q107 SW XP03312 4 3 303 ADIN2 3 10 2.
3-5 DC/DC CONVERTER PCB ASS’Y DATA COMMUNICATION ANALOG IMAGE SIGNAL ANALOG AUDIO SIGNAL F02 VBAT IC03 REG. D04 4 CN2 BATT GND VDC F01 4 DC_IN GND 3 DC_J_DET 6 5 2 1 L01 RSNS D02 3 4 Q10 I_SENSE 9 5 3 IC05 I_SENSE IC01 CHARGE CONTROL V_SENSE VDC 2 DRIVE V_SENSE IC04 Q06 I_SENSE SW 5 9 VREF Q40 V_SENSE SW CHG_CS 3 1 DRIVE2 13 SENS2 DRIVE3 8 Q16 SW EN1 SENS3 Q23 PWM SW 3 AVOUT VID FPC +21V D12 +15V D13 +12V 4 15 Q24 PWM SW L05 18 D14 -7.
3-6 LCD PCB ASS’Y DATA COMMUNICATION ANALOG IMAGE SIGNAL LCD PCB ASS’Y +5V Q102 (1/2) F102 FROM MAIN PCB ASS’Y CN101 8 Y+S 9 R-Y 11 B-Y 1 4 5 6 C115 51 3 LPF 2 1 2 C118 3 3 Q104 (1/2) 1 4 H.FILOUT 5 6 S.
