illIIIIII II!]!111111 illlltlll C_HOH _ower_hot CD[-E220 A 540 7_o,,,,_,-Shot A530 DIGITAL CAMERA Preparation Shooting Playback/Erasing Menus and Settings Printing r__ .....
I Flowchart The following according and guides Reference are available. to the flowchart Refer to them I Guides as necessary below.
'!. Installing the batteries, 1. Slide the memory card slot/battery cover lock in the direction of the arrow and open the cover. 2. Insert the 2 supplied AA-size alkaline batteries, or separately sold AA-size NiMH batteries. - Negative Positive end (-) end (+)- -0 o= [] SeetheAdvanced Guide:Battery Handling (p.102) 2. Inserting the Memory o) Card, 1. Insert the memory card until it clicks into place. _ Front 2. Close the memory card slot/battery [] cover.
• To Remove the Memory Card Push the memory card with your finger until the memory card clicks and then release it. You can use SD* memory cards and MultiMediaCards with this camera. These cards are collectively called memory cards in this guide.
First Time • Setting Settings the Date/Time m® 1. Press the power button (_). 2. Use the 4. or 4, button to select an item and the 4F or + button to change its value (®). 3. Confirm that the correct time is displayed and press the FUNC./SET button (®). The date and time can also be set in the Set up menu (p. 13). -O o cn The date/time setting screen will appear when the _] amera power is turned on for the first time, or when the capacity of the lithium date/time battery is depleted.
t. Press the power button. Power button The start-up sound will play and the start-up image will display in the LCD monitor. • Pressing the power button again turns the power off. • Pressing the power button while pressing and holding the DISP. button will turn on the mute setting which will mute all sounds except for warning sounds. [] SeetheAdvanced Guide:Using theLCDMonitor (p.15) []SeetheAdvancedGuide: Power SavingFunction (p.21) []See theAdvanced Guide: SetupMenu(p.
Reviewing an Image Right After Shooting After a shot is taken, the image appears in the LCD monitor for approximately 2 seconds. You can continue to display images regardless of the review duration setting with the following procedures. • Keeping the shutter button pressed after a shot. • Pressing the FUNG./SET or DISP. button while the image is displayed in the LCD monitor. To stop displaying the image, press the shutter button halfway. EISee theAdvanced Guide: Review (p. 24) E_le_(p.
[] Night scene Allows you to capture human subjects against the backdrop of an evening sky or night scene. The flash is directed at the person and the shutter speed is slow. so both the person and the background can be beautifully shot. SCN (Special Scene) YOU can shoot with the most appropriate [] settings for the scene. Night Kids&Pets Snapshot Allows you to Allows you to take snapshots of capture subjects that move around.
Stitch Assist Allows you to shoot overlapping images that can later be merged (stitched) to create one panoramic image on a computer. [] See the Advanced Guide (p, 43) Dsl_ Shoots a movie when you press the shutter button.
• Using the Zoom 1. Press the zoom lever toward _ or I-_3. The zoom can be adjusted from 35 mm - 140 mm (focal length) in 35mm film equivalent terms. Wide Angle: Zooms out from the subject. Et)3Telephoto: Zooms in on the subject. • Using the Flash 1. Press the _ button to cycle through flash settings. Each time you press the _ button, the flash settings will change.
[_] begins, theLCD lampmonitor blinks orange and the recharging LCD monitor hen the is on and flash turns off. When recharging ends, the orange lamp turns off and the LCD monitor turns on. The time required for flash recharging will change depending on usage conditions and remaining battery power. []See theAdvanced Guide: Rec,Menu(p,24) I eetheAdvance d Guide; Function sAvailabl einEachShooting Mode(p.
• Shooting Close-ups (Macro) 1. Press the _l_ button. To cancel the macro mode, press the _1_button to turn off the [] or [] display. This setting cannot shooting modes.
'l. Setthe mode switchto _ (playback)(_). The lastrecorded image willappear in the LCD monitor. (_ 2. Use the <- or 4, button to display the __ image you wish to view (_). Use the 4. button to move to the previous (_ image and the "k button to move the next image. Holding the button down advances the images more rapidly, but shows them less clearly. I se theAdvancedGuidefor the variousplaybackmetheds available. '!.
Settings for the shooting, playback or print modes or such camera settings as the date/time and sounds are set using the FUNC., Rec., Play, Print, Set up or My Camera menu. FUNC. Menu This menu sets many of the common shooting functions. (# ® ® _Set the mode switch to O (shooting). ® Press the FUNC./SET button. ®Use the ,IF or ,Ik button to select a menu item. • Some items may not be selectabIe in some shooting modes. (_ Use the ÷ or ._ button to select an option for the menu item.
Rec., Play, Menus Print, Set up and My Camera Convenient settings for shooting, playback or printing can be set with these menus. [] (Rec.) Menu -- (Set up) Menu (My Camera) Menu (# ® MENU MENU © © _) You can switch betweenmenuswith the 4, or ,1, button when this part is selected. • This example shows the Rec, menu, • In playback mode, the Play, Print, Set up and My Camera _Press menus display, the MENU button. 03 _Use the ÷ or .k button to switch between menus.
Connect the camera and simply press the to a direct _3,,_ print compatible button printer .1 with '_. Connect the camera to a direct print compatible and turn on the printer's power. -- a cable on the camera. Canon Brand Printers printer -- ÷_÷ Camera interface CabIe SELPHY CP Series Compact Photo Printers _2 PIXMA Series/ SELPHY DS Series Bubble Jet Printers .
2. Turn [], on the power [] monitor or [] in playback is displayed mode in the upper and confirm that left of the LCD (_). • The ,_,_., button will light blue. • The displayed icon will vary according to the printer model. 3. Select an image to print using the ÷ or ÷ button (_) and press the _3,_Mbutton (_). The ,[_w, button will blink blue and printing will start. I e_ theAdvanced Guide: Setting the DPOF Print Settings (p.
The following methods can be used to download images recorded by the camera to a computer. Some methods, depending on the OS used, may not be available. Please read System Requirements (p. 17) in advance.
System Requirements Please install the software on a computer meeting the following minimum requirements.
Preparing • Items to to Download Images Prepare • Camera and computer • Canon Digital Camera Solution Disk supplied with the camera • Interface cable supplied with the camera 1. Install the software. 1. Place the Canon Digital Camera computer's CD-ROM drive. Solution Disk in the 2. Click [Easy Installation]. Proceed with the installation while reviewing installation settings. 3. When the installation is complete, click either the [Finish] or [Restart] button that appears.
2. Connecting the camera to a computer. 1. Use the supplied interface cable to connect the computer's USB port to the camera's DIGITAL terminal. Slip your fingernail under the lower end of the camera's terminal cover, lift it open and plug the interface cable in all the way. uSB Port Interface Cable Cable 2. Set the camera's mode switch to (playback) and turn on the power. The camera and computer will be able to communicate.
Downloading Images to a Computer A window allowing you to set the preferences will appear when a connection is established between the camera and computer. 1. Select [Canon CameraWindow] and click [OK] (first time only). 2. Download the images. • Download the images using the camera or the computer. • By default, the downloaded images are saved into the [My Pictures] folder. Downloading Downloading By default, downloaded Images Using the Camera Images Using a Computer, (p.
Downloading Images to a Computer The following window will appear when you establish a connection between the camera and computer. If it fails to appear, click the [Canon CameraWindow] icon on the Dock (the bar which appears at the bottom of the desktop). 1. Download the images. • Download the images using the camera or the computer. • By default, the downloaded images are saved into the [Pictures] folder. You can set the type of image and the destination folder.
Downloading Images (Direct Transfer) Use this method Install using to download the supplied this method images software Using the using camera and adjust Camera operations. the computer settings before for the first time (p. 18). [] All Images Transfers and saves all images to the computer, [] New Images Transfers and saves to the computer only the images that have not been previously transferred, [] DPOF Trans.
• Select & Transfer/Wallpaper 2, Select [] FUNC./SET 3, Select or W, and press the _3_v button (or the button). images to download (or the FUNC./SET and press the r[3,_ button button). • The images will download. The ,13,¢_ button will blink blue while downloading is in progress. • Images can also be selected during index playback (Advanced Guide p. 73). • Press the MENU button to return to the Direct Transfer menu.
Safety Precautions Be sure to read, understand and follow the safety precautions below when using the camera, in order to prevent injury, bums or electrical shock to yourself and others. Do not trigger the flash in close proximity to human or animal eyes. Store this equipment out of the reach of children and infants. Avoid dropping or subjecting the camera to severe impacts. Do not touch the flash portion of the camera if it has been damaged. Stop operating the equipment immediately noxious fumes.
C&H@H CDI-E220-010 © 2006 CANON tNC, PRINTED IN MALAYSIA