Operating instructions

ManualsBrandsCanon ManualsCamcorder Accessories70 MC - ZR70MC MiniDV Digital Camcorder

CallOll

PUBDIM-519

Digital Video Camcorder

Instruction Manual

Camescope video num_rique

Manuel d'instruction

Videoc_mara digital

Manual de Instrucciones

70 65 60

Mini]r_ Digi_l

Video JEt

_ C_s_,ette

This instruction manual covers the ZR70 MC, ZR65 MC and ZR60 Please note that

illustrations and explanation in this manual are based on the ZRTO MC.

Ce manuel d'instruction traite des modules ZR70 MC, ZR65 MC et ZR60. Veuillez

noter que les illustrations et les explications contenues dans ce manuel sont bas_es

sur le ZR70 MC

Este manual de instrucdones cubre la ZR70 MC, la ZR65 MC, y la ZR60 Tenga en

cuenta que las ilustraciones y las explicaciones de este manual se basan en la

ZR70 MC

Summary of content (158 pages)

PAGE 1
PUBDIM-519 CallOll Digital Video Instruction Camescope Manuel Camcorder Manual video Videoc_mara Manual 70 Mini]r_ _ Digi_l Video C_s_,ett e This instruction illustrations digital de Instrucciones 65 60 JEt manual covers the ZR70 MC, ZR65 MC and ZR60 and explanation num_rique d'instruction in this manual Please note that are based on the ZRTO MC. Ce manuel d'instruction traite des modules ZR70 MC, ZR65 MC et ZR60.
PAGE 2
Important F Usage Instructions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. COPYRIGHTcopyright WARNING: Unauthorized recording copyrighted materialslaws.
PAGE 3
In these safety instructions the word "product" refers to the Canon Digital Video Camco_der ZR70 MC/ZR6R MC/ZR60 A and all its accessol_es 1 Read Instructions-All the safety and operating instructions should be _ead before the p_duct is operated¸ 2 Retain Instructions -- The safety and operating instructions should be retained for future reference 3 Heed Warnings -- All warnings on the p_)duct and in the operating instructions should be adhered to 4 Follow Instructions-All operating and maintenance i
PAGE 4
18 Damage Requiring Service -- Disconnect Fig, 1 _ _I_"__I,'_"_ _ this product flom the wall outlet and all power sources including battery, and refer servicing to qualified service personnel under the following conditions: a When the powe_supply cord or plug is damaged b If any liquid has been spilled onto, or objects have fallen into, the product c If the product has been exposed to rain or water d If the product does not operate normally even if you follow the operating instructions Adjust only those
PAGE 5
Reference The following Guide 4 manuals are supplied with the camcorder: O Digital Video Camcorder ZR7O MC/ZR65 MC/ZR60 Instruction Manual This manual explains the camcorder operations from basic video recording to the use of the full range of features O Windows XP Users Only DV NETWORK SOLUTION DISK So_Nare Instruction Manual This manual explains how to download/upload images from/to the memory card using a DV (IEEE1394) cable.
PAGE 6
Table of Contents Introduction Reference Guide ................................................................................... 5 Thank You for Choosing a Canon ............................................................. 9 introducing the ZR70 MCFZR65MOZR60 ..................................................................10 Components Guide ......................................................................................................
PAGE 7
Adjusting theAEShift 77 Setting theShutter Speed 78 Setting theWhite Balance 80 Playback Magnifying theImage 82 Displaying theData Code ................................................................... 83 Photo Search/Date Search ................................................................... 85 Returning toaPre-marked Position ........................................................ 86 4 Editing Recording to a VCR or Digital Video Device ..............................................
PAGE 8
Con_n_iQos Used in _hi_ Manu_! Operating Modes • Operating Mode _i_are_ o_ Position of the POWER Switch CAMERA CAMERA PLAY (VCR) PLAY (VCR) : ZR70 MC and ZR65 MC only, Available functions depend upon the operating mode. It is indicated asfollows: : Function can be used in this mode. ............. : Function cannot be used in this mode. e ............................................................. O [_ :Reference page number.
PAGE 9
Thank The Canon recommend You for Choosing ZR70 MC/ZR65 reading you to become MC/ZR60 this manual more familiar with provides thoroughly your a Canon a full range before camcorder, of options and functions you use the camcorder. We It will help and learn how to operate L%m it properly. We suggest moving that you master on to its full range the basic operations of the camcorder first, before of features.
PAGE 10
Introducing the ZR70 MC/ZR65 MC/ZR60 F Simply slide Carton's DM-5O Directional Stereo Microphone or VL-3 Video Light into the accessory shoe; the camcorder will automatically connections. g provide power and Show your creativity by using the special effects and faders. The multi-image Stabilizes your recordings even in long telephoto shots (in Camera mode) screen captures moving subjects in 4, 9 or 16 sequences of still images. Allows recording even in dark places.
PAGE 11
Components ZRIO M_ZR65 Guide MQ'ZR_Q [_ REC SEARCH + button (p. 35) / (fast forward) button (p 37) / CARD ÷ button* (p 111) REC(record) SEARCH-- button [_ Record review button (p. 35) / _1_1 (_ewind) button (p g7)/ CARD - button* (p 11t) (p. 75)/ Iplll(play/pause)button(p. • (stop) button [] (index 37) IP 77) / (p. 37) I screen) button* (p 112) (p32) c _ o _release) button(p16) (p.32) attachment unit (piG) button DCINterminal(p Backu (plg) Selector dial y card slot* (p.
PAGE 12
F -o O CAMER PLAY(VCR) *_r_l 12 and_ only Cassette cover(p compartment 22) Cassette (p22) compartment
PAGE 13
4 D C -- & Termina_ cover o (p _ 59) _ Remote sensor _ Stereo microphone (p. 24) _ Terminal (p 7_) cover SwideoIN/OUT _ termlnaI (p 41) MICterminal AV IN/OUT terminal -- (p.
PAGE 14
Wire|ess C.ontmlle_ F WL-D80 o= __ PHOTO (DigitaJ effects) button {_ START/STOP (_ _ SELF T bu_ton (p 70) TV SCREEN {_ _7_ SEARCH SELECT 12bit AUDIO (p. 85) FF I_ @ ÷/lllbbutton button (p 86) bu_ton (p. 37) (p 38) STOP II button @ (p 98) (p.
PAGE 15
Using a Household Power Source You can operate the camcorder from a household power source using the suppEed power adapter The power adapter converts current from a power outlet (100-240 V 4 AC, 50/60 Hz) to the DC current used by the camcorder. 1. Turn the POWER switch to OFE 2. Connect the power cord to the power adapter. 3. Plug the power cord into a power outlet.
PAGE 16
Attaching F and Charging the Battery Pack Charge the battery pack with the supplied power adapter before you use the camcorder for the first time and subsequently when the message "CHANGE THE BATFERY PACK" appears, 1. Turn the POWER switch to OFE 2. Move the viewfinder 3. Attach the battery upward. pack to the camcorder. • Remove the termh_al cover of the battery pack.
PAGE 17
Below times playback Charging Battery are approximate and vary according to the charging, recording or conditions, Time Pack Charging Time BP÷508 (ZR65 MC/ZR60) 110 mlm BP÷512 (ZR70 MC/optlonal) 120 mlm BP÷511 (Optional) 120 mlm BP÷522 (Optional) 210 mlm BP÷535 (Optional) 310 mlm • Charge the battery pack in temperatures between 4t ° F and 104° F (5° C and 40° C) • A lithium ion battery pack can be charged at any charge state Unlike conventional batter,/packs, you do not need to complet
PAGE 18
The battery symbols indicate the charge status of the battery F pack. When the battery pack is empty, "CHANGE THE 8ATI-ERY PACK" appears for 4 seconds and 4-- starts flashing The battery charge indicators are not constant - they vary according to the condition under which battery pack and camcorder are used. 8_e_ Pack H_ndli_g _¢¢_utiQns DANGER! Treat the battery m pack with care. • Keep it away from fire (or it might explode.
PAGE 19
Installing the Backup Battery The backup battery allows the camcorder to retain date, time and other camcorder settings while the power source is disconnected Power the camcorder from a 4 household power source or with a battery pack when replacing the backup battery. 1. Open the backup battery cover. 2. Insert the lithium battery with the + side facing outward. 'o 0 @ 3. Close the cover. +@@@m WARNING! • The battery used in this device may present a fire or chemical burn hazard if mistreated.
PAGE 20
Preparing _ Adjusting the Camcorder the Vi_wfind_[ 1. Turn on the camcorder (DiQp_[ Adjustment) and keep the viewfinder. 2. Adjust H the diopter adjustment lever. Do not leave the viewfinder to direct may melt (due to concentration of light by the exposed lens) Adiust the sunlight angle of as theit viewfinder to prevent sunlight from entering, =_._ = 1. Attach the cord to the lens cap.
PAGE 21
Attach!rig _h_ 5h_uld_ Strap For extra security and portability, attach the shoulder strap before using the camcorder. Pass the ends through the strap and adjust of the strap. the length mount 4 m JEWel Moun_ing the _id_ A_hmen_ _ _, The WA-3O.5 Wide Attachment gives you a wide perspective for indoor shots or panoramic views (0.6×). The wide attachment is for use at maximum wide-angle. _"_= Screw the wide the lens filter H attachment fully into thread.
PAGE 22
Loading a Cassette Use only videocassettes marked with the M_,_ logo, Loading and UnA_ading ...................................................................................... 1. Slide and hold the OPEN/EJECT switch and open the cassette compartment cover. Tape protection tab The cassette compartment opens automatically 2. Load/unload the cassette. • Load the cassette with the window facing the grip belt and the REC/SAVEtab faring upward m ==.
PAGE 23
_[Qte¢/;ing ;rape_ frQm Accident! E_sur_ To protect your recordings from accidental 4 erasure, slide the tab on the cassette to the left. (This switch position is usually labeled SAVE or ERASEOFR) If you load a protected cassette in CAMERA mode, the message "THE TAPE IS SETFOR ERASUREPREVENTION" appears for approx. 4 seconds and _ starts flashing. If you wish to record on that cassette, slide the tab back to the right C) Rewind tapes after use.
PAGE 24
Using F the Wireless Controller You can operate the camcorder with the supplied wireless controller from a distance of up to 16 feet (5 m). Point it at the camcorder's remote sensor when you press the buttons.
PAGE 25
Setting the Time Zone, Date and Time [] [] Set the time zone, date and time when you first start using your camcorder. Install the backup battery before you begin ([_rl 19). Setting the Time Zone!Day!ight S_ing L_m _ime ESYSTI IT,zO"E/0ST'''",Y 0 1. Press the MENU button to open the menu. MENU m 2, Turn the selector dial to select [SYSTEM] and press _ the selector dial. m _ 3. Turn the selector dial to select [T.ZONE/DST] and press the selector dial.
PAGE 26
F m =_.__ No Time zone NO Time zone [] LONDON [] WELLGTN [] PARIS [] SAMOA [] CAIRO [] HONOLU (Honolulu) [] MOSCOW [] ANCHOR (Anchorage) [] [] DUBAI KARACHI [] [] LA (LosAngeles) DENVER [] DACCA [] CHICAGO [] BANGKOK [] NY. (New York) [] H KONG (Honq Kong) [] CARACAS [] TOKYO [] RIO (Rio de JaJleko) [] SYDNEY [] FERNAN.
PAGE 27
2. Turn the selector dial to select [SYSTEM] and press the selector dial. 3. Turn the selector dial to select [D/TIME 4 SET] and press the selector dial. The year display starts to flash. 4. Turn the selector dial to select the year, and press the selector dial. • The next part of the display starts flashing. • Set the month, day, hours and minutes in the same way. 5. Press the MENU button to close the menu and to MENU start the clock.
PAGE 28
Recording F Movies on a Tape You can use the LCD screen or the vie_inder [] [] when recording, Before You Begin Recording Make a test recording first to check if the camcorder operates correctly. Before you make important recordings, clean the video heads (_[_ 142). Preparations Connect a power source Load a cassette. 1. Remove the lens cap. 2. Set the camcorder =_._ ZRTOMC/ZR65MC to CAMERA mode.
PAGE 29
1. Turn the POWER switch to OFE 4 2. Close the LCD panel. 3. Replace the lens cap. 4. Unload the cassette. 5. Disconnect H the power source.
PAGE 30
Zooming F [] [] The camcorder's zoom lens allows you to choose the best picture angle for your recordings. The camcorder automatically switches between optical zooming and digital zooming, Image resolution is slightly lower with the digital zoom, Zoomin W ' T i Zoom out Qp_i¢_! Za_m | _',I;T._O 22× optical Move =_.-_ angle). zoom 20× optical the zoom lever toward Move it toward zoom 18x optical zoom W to zoom out (wide- T to zoom in (telephoto).
PAGE 31
5. Press the MENU button to close the menu. MENU 4 O Keep at least 328 ft. (lm) to the subject At wide-angle, you can focus on a subject as close as 039 in. (Icm) O A zoom indicator appears for 4 seconds It extends in light blue when the digital zoom is set to 88x/80x/72x, and extends further in dark blue when set to 440x/400x/360×. O Digital zoom cannot be used in the Night mode and Super Night/ZR70 MC) mode.
PAGE 32
Using F the LCD Screen 1. Push the OPEN button at the LCD panel and open the LCD panel. The LCD screen switches on and tile viewfinder switches off 2. Rotate the LCD panel and choose the angle of the screen. You can rotate the LCD panel so that tile screen faces in the same direction as the lens ([_] 33), or push it flat against the camcorder with the screen facing outward 3. Close the LCD panel after use. • Close the LCD panel firmly until it clicks • The LCD screen switches off and the m =_.
PAGE 33
4 1. Press the MENU button to open the menu. MENU 2. Turn the selector dial to select [DISPLAY SET UP] and press the selector dial. t J_/ 3. Turn the selector dial to select [BRIGHTNESS] press the selector dial. and _ _ m 4. Turn the selector dial and adjust the level. Turn the selector dial up to make the screen brighter and down to make it darke_: 5. Press the MENU button m to close the menu.
PAGE 34
iii /_._i_'i_ i_!,_" MENU(_ 44) IOlSPLAY SET UP /_!i.,l_ ii I)_ILCDMIR_OR..0N 1. Pressthe MENU button to open the menu. 2. Turn the selector dial to select ]DISPLAYSETUP] and pressthe selector dial. 3. Turn the selector dial to select [LCD MIRROR] and press the selector dial. 4. Turn the selector dial to select [OFF]. 5. Pressthe MENU button to close the menu.
PAGE 35
Searching and Reviewing when Recording REC(record) SEARCH- button/ Recordreview button _:_ [] RECSEARCH+ button 4 D RecoEd R_ie_ m In record pause mode, this function allows you to review the last few seconds of your recording to check if it has been recorded properly_ Press and release the _ (record review) button.
PAGE 36
Tips for Making F Better Videos For maximum stability, grip the camcorder in your right hand and keep your right elbow pressed against your body If necessary, support the camcorder with your left hand Be careful that your fingers do not touch the microphone or lens, High-angle Recording Low-angle Recording Eo_ M_mS_abilit_ "= _ Lean against a wall Put the camcorder on a table f Lie on your elbow Use a tripod _gh_i_g When recording outdoors, we recommend recording with the sun at your back, H 36
PAGE 37
Playing Back a Tape [] [] When you use the LCD screen for playback, the camcorder plays back the sound via built-in speaker_ The built-in speaker is monaural Use headphones for stereo sound or 4 when using the viewfinder for playback. Connect a power source. Load a cassette. 1. Set the camcorder to PLAY (VCR) ZR70MC/ zR65MC mode. m 00 m 2. Open the LCD panel. You can also close the LCD panel with the ..... screen facing outward 3. Press the 4_1 button to rewind the tape.
PAGE 38
Sg_¢_al _!_yback M_d_ Special playback modes (except of playback pause and fast/rewind playback) can only be operated with the wireless controller. b/ll (Playback Pause) To pause playback, pressthe •/11 button. Pressthe •/11 button to resume playback. The camcorder goes into stop mode after 5 minutes in playback pause mode 8.__ = •• (Fast Forward Playback) / _ (Rewind Playback) =_ Plays back the tape at 9.5 times normal speed (forward or reverse).
PAGE 39
_M 4 _ (phones)terminal L< ENUbutton Selector dial ..... H When built-in makemake sure that "_" "_" is notisdisplayed the screen using Whenthe using the speaker; headphones, sure that displayed on Change the setting as necessary following the procedure below MENU([_ 44) [VCR SET UP I)_IAV/PHONES.,,AV _'_ 1. Pressthe MENU button to open the menu. MENU 2. Turn the selector dial to select [VCR SET UP] and press the selector dial. 3.
PAGE 40
F *Headphone volume only. Turn the selector down to lower dial up to increase the volume, and the volume. _.. • A volume bar appears for 4 seconds • You can turn off the volume completely by turning the selector dial down until OFFappears Turn the selector dial up to increasethe volume again 0 Sound may become distorted when the volume is turned up too high. 0 The headphone volume can be adjusted in all operating modes.
PAGE 41
Playing Back on a TV Screen You can connect the camcorder to a TV or VCRto play back your recordings on a "R/ screen, H O Make sure that "O" is not displayed on the screen If "O" is displayed, change the setting ([_[_ 39) O When you use the TV as a monitor during recording, keep the TV volume turned down as long as the camcorder's audio terminals are connected.
PAGE 42
3. Connect the STV-2SON Stereo Video Cable to the camcorder's terminal F and the audio terminals AV of the TV/VCR. Connect the white plug to the white AUDIO terminal L (left), and the red plug to the red AUDIO terminal R (right) Do not connect the yellow plug 4. If connecting to a "iV, set the input selector to VIDEO. If connecting to a VCR, set the input selector to LINE. _.S_vJt h_Au_ ia/_ide_ XermJna Refer also to the TV or VCR instruction manual, m ==.
PAGE 43
You can select the output channels when playing back a tape with audio recorded on 4 two channels, MENU(_I 44) [AUDtO SETUP 1. Press the MENU button I_IOUTPIJTCH*_*_./R to open the menu. 2. Turn the selector dial to select [AUDIO MENU SET UP] and press the selector dial. m 3. Turn the selector dial to select [OUTPUT CH] and press the selector dial. 4. Turn the selector dial to select a setting option. • L/R:Stereo: L+R channels, Bilingual: Main+Sub. • L/L: Stereo: L channel, Bilingual: Main.
PAGE 44
Menus F and Settings [] [] Many of the camcorder's advanced functions are selected from menus that appear on the screen, Selecting Menus and 5e_ings 1. Set the camcorder to the correct operating mode. ZR70MC/ZR65MC: 2. Press the MENU button to open the menu. MENU m _ =_ = "5 3. Turn the selector and press the selector dial. 4. Turn the selector =_ dial to select a submenu dial to select a menu item and press the selector dial. 5. Turn the selector dial to select a setting 6.
PAGE 45
M_nu _nd D_fau!_ 5_,ti_g_ Default CAMERA settings Menu Submenu =_ CARD MiX *2 are shown (CAM. in boldface. MENU) Menu Item MIX TYPE ANIMAT. Setting Options CARD CHROMA, CARD LUMI., CAM. CHROMA, C. ANIMATION CORNER, STRAIGHT, RANDOM TYPE 123 MIX LEVEL CAMERA SET UP 122 SHUTTER AUTO, I16_ I1100, I125_ I1500, I11000, 112000 zRTo MC VCR SET UP AUDIO SET UP DISPLAY SET UP ;YSTEM ZR6SMC 78 30 IMAGE S. (_a}) ON, OFF 16:9 WHITE 8AL.
PAGE 46
PLAY (VCR) F Menu Submenu VCR SET UP AUDIO SET UP (VCR MENU) Menu Item REC MODE SP, LP Setting Options [_3 54 AV/PHONES AV, PHONES _ 39 AV =_ DV OUT ON, OFF 93 OUTPUT CH L/R, L/L, R/R 43 AUDIO DUB. AUDIO IN, MIC. IN 97 WIND SCREEN ON, OFF 71 AUDIO MODE 16bit, 12bit 12bit AUDIO STEREO1, STEREO2, MIX/FIXED, 71 MIX/VARL MIX BALANCE CARD SET UP *2 m CARD OPERATIONS *2 DISPLAY SET UP =_ .
PAGE 47
_CARD CAMERA Menu (C. CAM. MENU) ............................................................ ................... Submenu CAMERA SET UP CARD SET UP VCR SET UP Menu Item SHUTTER Setting Options AUTO, 1/60, I/I00, 1/250 78 WHITE BAL. AUTO, SET _, 80 SI QUALITY SUPER FINE, FINE, NORMAL 101 SI SIZE 1024 × 768, 640 x 480 101 MOVIE S_ZE*_ 320 x 240, 160 × 120 102 FILE NOS.
PAGE 48
_CARD PLAY (VCR) Menu (C.PLAY MENU) m F I Submenu CARD OPERATIONS Sin le Image Setting CANCEL, EXECUTE _PRINT ORDERS ALL ERASE YES, NO 117 iMAGE ERASE CANCEl-, SINGLE, ALL 115 FORMAT CANCEl-, EXECUTE 128 Options 114 CARD OPERATIONS index Screen) _PRINT VCR SET UP REC MODE SP, LP 54 AV/PHONES AV, PHONES 39 DISPLAY SET UP m Menu item COPY_ SYSTEM PROTECT O'.
PAGE 49
Changing the Remote Sensor Mode [] [] Two remote sensor modes and an off setting are available to prevent interference from other Canon wireless controllers being used nearby. Turning the Remote 5_ns_ Qff ,,,u EsysT ° 0 °oTE...,Ol (_[344) Open the menu and select [SYSTEM]. Select [WL REMOTE], set it to [OFF (l_(_] and close the menu. [(I,(_]] appears Changing th_ RemQt_ 5_ sYsT ° 0 °oTE... 0Ol _ MENU M_d_ r ]1 1. On the camcorder, [SYSTEM].
PAGE 50
Customizing F the Camcorder You can personalize your camcorder by customizing the start-up image and the sound it makes for start-up, shutter*, start/stop and self-timer (collectively called the My Camera settings). * ZR70 MC and ZR65 MC only. With the ZR70 MC and ZR65 MC, you can also create your own start-up image. See Creating a 5tart-up Image (_[_ 130). MENU (_3 44) CAMERA J_IS-UP IMAGE. • ,ON (ZR60) SHTR SOUND, • .PATTERN1 S-UP m =_ 1.
PAGE 51
_Setting the Light.up Buttons [] [] 4 The buttons above the LCD panel light up when the camcorder's power is on, or when you press a button. This is helpful if, for example, you wish to play back a tape in dark places. You can select the color of the light-up buttons from green, orange, blue, yellow, MENU button turquoise and purple. Selector dial S_l_cting _ Light-up Setting Open the menu and select [SYSTEM]. Select [BUTTONLIGHT], set it to [PUSH ON] or [OFF] and close the menu.
PAGE 52
Other F Camcorder Settings [] [] You will hear a beep upon camcorder operations such as power on/off, start/stop, selftimer countdown, automatic shut-off, and unusual conditions of the camcorder. The beep will not be recorded. If you turn off the beep, all camcorder sounds including the ones of the My Camera settings will be turned off. TO turn the beep off, open the menu and select [SYSTEM]. Select [BEEP], set it to [OFF[ and close the menu.
PAGE 53
The demonstration automatically mode displays the camcorder's main features when you leave the camcorder turned on without (ZR70 MC/ZR65 MC: and without inserting a memory card) for more than 5 minutes. You can also start the demonstration ......? MENU(c3 44) With menu 101spLAy SET UP no cassette It starts loading a cassette 4 mode through the menu, ..... I'>10EMO aODE..*0N (ZR70 MC/ZR65 MC: and memory and select [DISPLAY SET UP].
PAGE 54
Changing the Recording Mode (SP/LP) [] [] You can choose from SP(standard play) and LP (long play). LP extends the tape usage by 15 times, H O Tapesrecorded insert ([._1 94). in LP mode cannot be used for audio dubbing ([:]_196) or AV O Depending on the nature and usage condition of the tape, picture and sound recorded in LP mode may be distorted We recommend using the SP mode for important recordings 0 We recommend recording in SPmode if you plan to transfer the images to a computer.
PAGE 55
Recording Still Images on the Tape [] [] You can record still images on the tape, Starting your recording with a still image allows you to easily locate the beginning of the recording with the Photo Search function ([_] 85) PHOTO buttonPHOTO bud°n-" In Record Pause Mode 1, Press the PHOTO button halfway.
PAGE 56
0 When you turn the POWERswitch to OFFwhile the camcorder is recording the F m =_ .,=._ C 56 still image, it will not turn off until recording is complete 0 Record still images under suffident lighting condition (in which you can identify the subject on the screen).
PAGE 57
Using the Recording The camcorder modes. is equipped The availability with Programs the Easy Recording of functions differs depending program [] and several on the selected program AE mode Availability of Functions in Each Mode: Position of the Program Selector C_ ecordiogPro0ram o IsloI I Io Digital Zoom Shutter O Speed O O I A Focus O A White Balance O © AE Shift Image Stabilizer Digital Effects .2 ON © × 16:9 × Card Mix *_ × I × I × O .
PAGE 58
Use this mode to record sports scenes (such astennis or golf), moving objects (such as roller coasters) or when recording from a moving car. O This mode is set at a high shutter speed and should therefore be used in suffident fight O This mode is mainly intended for frame-by-frame or slow playback. The picture may not appear smooth when played back in normal speed Use this mode to give accent to your subject by blurring the background or foreground.
PAGE 59
Usethis mode to record in dark places. The shutter speed is adjusted automatically. It is useful when recording in places with changing light conditions (such as in amusement parks) C) _ mode _ 4 Night mode cannot be used in CARD CAMERA C) Moving subjects may leave a trailing afterimage O Picture quality may not be as good as in other modes O White points may appear on the screen O Autofocus may not work as well as in other modes.
PAGE 60
_l_rtinn F th_ Prnnr_m 1. Slide the program AF Mnrl_ selector to _ (program AE). 2. Pressthe selector dial. A list of the programAE modesappears 3. Select a mode and press the selector dial.
PAGE 61
Using Digital Effects [] [] 4 You can use the digital effects during recording and playback, Faders ([_I 62): Begin or end scenes with a fade to or from black, Effects ([1_.]65): Add flavor to your recordings Multi-image screen (_[:l 67) Availability of Digital Effects by Operating CAMERA FLAY (VCR) Modes: ZR70 MOZR6S MC: ZR70MC/ZR65 MC: CARD CAMERA CARDPLAY(VCB) Movles Still Images Faders O X O X X Effects 0 0 0 O.1 X Multi*image screen 0.
PAGE 62
The image gradually fades in The image gradually fades out The image begins as a vertical line in the center and expands sideways until it fills the whole screen. The image is wiped off from the sides of the screen. The image appears from the corners until it fills the _ whole screen. =_ The image is wiped off from the corners. J_ _I_mp_(JUMP) A small image appears from the left, jumps into the center and enlarges until it fills the whole screen.
PAGE 63
The image appears in 16 pieces. The pieces move around until the 4 puzzle is solved. __:: The image is divided into 16 pieces.
PAGE 64
F 1. In CAMERA mode, set the program selector to _. 2. Press the DIGITAL EFFECTS button. [D.EFFECTS_], @ DIGI_L EFFE_ [FADER],[EFFECT]and [MULTI=S]appear 3. Select [FADER]. 4. Select the fader option. 5. Press the DIGITAL EFFECTS button. The name of the seEectedfader flashes CAMERA mode: =_ 6. Fade in: In record pause mode, press the ON/OFF _ button and begin recording by pressing the _ start/stop O_OFF button.
PAGE 65
Theimage becomes likeapaint (soladzation), Theimage becomes black andwhite, Theimage becomes monochrome withabrownish tint Theimage isblurred through enlarging thesize ofsome pixels Theimage becomes likeaball. Theimage becomes acube androtates. @°i m -m c Wave_WAV_) Both ends of the image sway in waves. C_!or,Ma_ki_g (CQLORM,) The image becomes a rhombus surrounded by a masking frame that changes the colors, Creates a symmetrical image as if there would be a mirror in the center of the screen.
PAGE 66
F 1, Press the DIGITAL EFFECTS button. [D.EFFECTSOFF], [FADER],[EFFECT]and [MULTI-S] appear DIGITAL EFFECTS 2, Select [EFFECT], 3, Select the effect. 4. Press the DIGITAL EFFECTS button. The name of the seEectedeffect flashes DIGITAL EFFECTS 5. Press the ON/OFF button. 0N/OFF • The name of the seEectedeffect stops flashing • The effect can be actwated/deactivated by pressing the ON/OFF _ =_ .,= button ._.._z_.'._.__.:'.t_..._.'.'...._. ':._.._.v__ '.._t..._.e,_:._..-.e..,.:_'_.__ .................
PAGE 67
Using the Multi.Image Screen [] [] The multi-image screen captures moving subjects in 4, 9 or 16 sequences of still images with the Image Capture feature and displays them at one time. Sound will be [_ recorded normally. This feature can be used in CAMERA and PLAY (VCR) mode. You can choose the transition speed at which to capture the subject from manual, fast (every 4 frames), moderate (every 6 frames*) or slow (every 8 frames*).
PAGE 68
lO.Press the ON/OFF button. F • MANUAL: Images will be captured each time you press the ON/OFFbutton The blue frame indicating the next sequence disappears after the last image. To cancel the last captured image, press and hold the ON/OFFbutton To cancel the multiqmage screen, press and release the ON/OFFbutton • FAST,MODERATE,SLOW:The set number of images will be captured at the set speed. TOcancel the multi-image screen, press the ON/OFFbutton 11.Press the start/stop button begin recording.
PAGE 69
Turning Off the Image Stabilizer [] [] The image stabilizer allows you to obtain steady recordings even at telephoto. There is no need to turn off the image stabilizer during normal recording. However, the camcorder tries to compensate for horizontal movements and you may therefore decide to turn it off during panning. The image stabilizer cannot be turned off when the program selector is set to C3. ,17!!117 i Open the menu and select [CAMERA SET UP].
PAGE 70
Recording With the Self.Timer [] [] PHOTO : button _ (self-tirne,)- -_ _ _ _ When Start/stop Start/::::::o_ 1. Press the ® (self-timer) "_ " appears = ._ "= "5 _ recording button .... utt°° button. _/co_'< _T_ movies 2. Press the start/stop button. The camcorder starts recording after a lO-second countdown (2 _ seconds when using the wireless controller) The count down =_ appears on the screen 3. Press the start/stop button to stop recording.
PAGE 71
Audio Recording Cb_ngJng,_ [] [] Audi_ Mod_ You can record sound in two audio modes--16-bit and 12-bit. The 12-bit mode records sound on two channels (stereo 1), leaving 2 channels free (stereo 2) for adding new sound later. Select the 16-bit mode for higher sound quality. ................................. , Open [16bit] the menu and select [AUDIO SET UP]. Select .¢ [AUDIO / MODE], set it to and close the menu. "16 bW' appears for approximately 4 seconds.
PAGE 72
O Low sound may be reduced together with the wind noise We recommend F turning off the wind screen for normal recordings O The wind screen function cannot be turned on/off during recording O The wind screen function can also be used for audio dubbing (when [AUDIO DUB.] is set to [MIC.
PAGE 73
Using the VL.3 Video Light (Optional) This video light enables you to record brightJy in color even in dark places. This VL-3 Video Light attaches to the camcorder's _ advanced accessory shoe for cable-free 4 operation and is powered by the camcorder's power supply.
PAGE 74
Using the DM.50 Microphone (Optional) F The high sensitive Directional Stereo Microphone DM-5O attaches to the_" advanced accessory shoe for cable-free operation and is powered by the camcorder's power supply.
PAGE 75
Adjusting the Focus Manually [] 4 Some subjects may not be suitable for autofocus, in such case, focus manually, Autofocus Reflective may not work surfaces Through dirty or wet windows well on the following Subjects with Eow contrast (e_g. White Wall) Different Distances subjects: Fast Moving Subjects Dark Subjects Horizontal Night Stripes Scenes .................... 1. Set the program selector to [_. @ m 2. Adjust the zoom.
PAGE 76
5. Press the FOCUS button to return to autofocus. F The setting resets to autofocus when you switch the program selector to Infinltv Fnrllc Use this function when you wish to focus on faraway subjects such as mountains or fireworks Press the focus button more than 3 seconds in step 3.
PAGE 77
Adjusting the AE Shift [] You can adjust the AE (auto exposure) function to lighten or darken the image, This allows you to compensate for backlit or overexposed scenes, Available Levels: -2 to +_ 4 in 0.25 intervals (excluding -1,75 and +1.75). 1. Set the program selector to [_. 2. Set the program AE mode to _ Auto, _ Sports, _ Light or _ Low Light Plus (ZR70 MC) mode. @ Portrait, _ Low 3. Pressthe AE SHIFT button. "AE ±0" appears in light blue 4.
PAGE 78
Setting F In the _ the Shutter Speed [] [] Auto mode, you can adjust the shutter speed manually to make stable shots of fast moving subjects. 1. Set the program selector to [_. 2. Set the program AE mode to the _ 3. Open (AUTO) mode. the menu and select [CAMERA SET UP]. 4. Select [SHUTTER]. 5. Select the shutter m #.'4 speed and press the selector dial. CAMERA Mode _'_r_r_, CARD CAMERA Mode AUTO 1/60 1/100 1/250 1/500 1/1000 1/2000 AUTO 1/60 1/100 1/250 6. Close the menu.
PAGE 79
0 Guidelines for Recording with High Shutter Speeds: - Outdoor sports such as golf or tennis: t/2000 4 - Moving objects such as cars or roller coasters: t/t000, 1/500 or 1/250 - Indoor sports such as basketball: t/t00 C 79
PAGE 80
Setting the White Balance [] [] The camcorder's auto white balance system adjusts the colors to appear natural for different lighting conditions. However, you can use the preset modes to reproduce colors more accurately, or set a custom white balance to obtain the optimal setting.
PAGE 81
IoAoERA SETI Iw,, .L...AOTO E 4 Pr.2L(.L"d°°r.)...°L_L!°_°°_.)...s_tt! ."._._ .................................................... 1. Set the program selector to (_. 2. Open the menu and select [CAMERA SET UP]. 3. Select [WHITE BAL[. 4. Select _-._: (indoor) or _÷_(outdoor). 8 or _÷:appears 5. Close the menu. For Custom White Balance: 1. Set the program selector to (_. 2. Open the menu and select [CAMERA SET UP[. 3. Select [WHITE BAL]. 4.
PAGE 82
Magnifying the Image The playback image can be magnified 1. Move the zoom lever toward by 2 times. 3". • The image is magnified by 2 times • A frame appears indicatingthe position of the enlarged part. 2. Move the image. • Turn the selector dial to move the image to the right and left, or up and down Pressing the selector dial switches between the directions.
PAGE 83
Displaying the Data Code [] [] Once date and time are set, the camcorder maintains a data code containing recording date and time and other camera data such as shutter speed and exposure 4 (f-stop) (ZR70 MC/ZR65 MC: Only date and time appear when playing back a memory card) s DATA CODE button Controller buttons .... ' MENU button DATA CODE button MENU button ......
PAGE 84
5_lect ng t_h_Da_/Time,D_sPlay ¢_mbinati_n F Open the menu and select [DISPLAY SET UP]. Select [D/TIME SELl, set it to [DATE] or [TIME] and close the menu. _ll_U_([ _ 44) I _IS_LAY SET U_ I_ ATA _0DE'_'DATE/T_ME Open the menu and select [DISPLAY SET UP]. Select [DATA CODE], set it to [DATE/TIME], =_ "= _ [CAMERA DATA] or [CAM. & D/T] and close the menu. Press the DATA CODE button. Only date and time appear in CARD PLAY(VC R)mode.
PAGE 85
Photo Search/Date Search [] You can search for a still image recorded .......SEARCH SELECT button anywhere on the tape with the photo search function, or locate the change of the date/time zone with the date search function, 4 ..... Search buttons .......STOP • button 2. Press the _ • Pressthe _ or I<< button to begin searching.
PAGE 86
Returning to a Pre-marked Position If you wish to return to a particular scene later, mark the point with the zero set / [] REW _41 button memory and the tape will stop at that point .....PLAY I_ button when you rewind/fast forward the tape, .....FF_I_ button ZERO SET MEMORY button 1. Press the ZERO SET MEMORY button .....STOP • button at the point you wish to return to later. • "0:00:00 I_1" appears • To cancel, press the ZEROSETMEMORY button again.
PAGE 87
Recording to a VCR or Digital Video Device [] [] You can copy your recordings by connecting the camcorder to a VCR or a digital video device. If you connect a digital video device, you can copy recordings with virtually no generation H 4 loss in image and sound quality.
PAGE 88
Refer also to the instruction manual of the digital video device. F ide with an arrow Signal flow Commercially m .
PAGE 89
Recording fromAnalogVideoDevices (VCR,TVorCamcorder) [] You can record videos or TV programs from a VCR or analog camcorder on the tape in the camcorder.
PAGE 90
Recordingfrom Digital Video Devices(DV Dubbing) [] F You can record from other digital video devices equipped with a DV terminal with virtually no loss in picture and sound quality. H C) When recordh]g digital video DV" devices, make sure that "AV,_ DV" is not displayed on the from screen.
PAGE 91
CQpyrightSigna! Certain software tapes are copyright protected. If you attempt to play back such tape, "COPYRIGHT PROTECTEDPLAYBACK IS RESTRICTED"appears and you will not be able to view the contents of the tape terminal, If you attempt to record from such tape via the DV 4 "COPYRIGHT PROTECTEDDUBBING RESTRICTED"appears and you will not be able to record the contents of the tape.
PAGE 92
Converting Signals _] Analog Signals into Digital (Analog.Digital [] [] Converter) By connecting the camcorder to a VCR or 8mm video camcorder, you can convert analog video/audio terminal H signals to digital signals and output the digital signals via the DV The DV terminal serves asoutput terminal only. () Headphones cannot used during analog-digital conversion. 0 Unload the tape frombethe camcorder 0 Turn off all devices before starting the connections.
PAGE 93
Tu_jng On _theAnalog-Diglt_a_ Press the AV ,_ DV button C,onverter on the wireless _ ...................................... controller. OR .,NU(_3 44) I VCR SET UP Open the menu I_LAV=FDV OUT,.OFF and select [VCR SET UP]. Select [AV ..F DV OUT], set it to [ON] and close the menu. H O For normal use, set [AV .
PAGE 94
Replacing Existing Scenes (AV Insert) [] You can insert and replace images/audio on the tape of the camcorder with images/audio from other video devices connected via AV terminal or DV terminal. Sceneto be inserted Playback tape Insert start Insert end Tape in the camcorder before inserting Tape in the camcorderafter inse_ing Inserted scene mU, .
PAGE 95
Example: AV Insert from .................... _,I¸-_'¸_¸I¸¸I¸'_¸¸¸..................... _i_ _x_% i_! a VCR _ I 1. Connect the camcorder pause playback cassette. shortly 3. Set the camcorder _ [i 4 to the VCR. See Playing Back on a TV Screen (_ 2. VCR: Load a recorded i¸ 4 t). Locate the scene you wish to insert and before the scene. to PLAY (VCR) mode and load a recorded cassette. Make sure the tape-protect switch is set to allow recording 4.
PAGE 96
Audio F Dubbing [] You can add sound from audio devices (AUDIO iN) or with the built-in or an external microphone (MIC.
PAGE 97
UsiBg_ Microphone 4 O When using the built-in microphone: do not connect any cables to the microphone terminal or the accessory shoe, O When using an external microphone: Connect it to the microphone terminal, O _ When using the DM-50 Microphone: Do not connect any cables to the microphone terminal O When you connect a TV via the S-video terminal, you can check the picture on the TV screen and the sound with headphones connected to the camcorder When you connect a TV via the AV terminal, you can check the
PAGE 98
7. Press the STOP • button on the wireless controller to stop dubbing. F Audio device: Stop playback Set the zero set memory at the end of the scene you wish to dub audio. The camcorder will automatically stop audio dubbing at that point You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust the balance of both sounds, 12bit AUDIO OUT button .... [,00,0 s,, I l,,0,t ,00,o..,,,o, (L[344) :_ 1. Open the menu and select [AUDIO select a setting SET UP[.
PAGE 99
Connectingto a ComputerUsinga DV (IEEE1394)Cable You can transfer recordings to a computer equipped with a DV (IEEE1394) terminal or IEEE1394capture board (optional software required).
PAGE 100
Inserting and Removing The chapter Using a Memory Card ( _ and ZR65 MC only. You can use _ the Memory Card 100-133) refers to functions of the ZR70 MC SD Memory Cards or a commercially available MultiMediaCards Terminals with this camcorder. The SD Memory Card has a protect switch for prevent accidental erasure.
PAGE 101
Selecting the Image Quality/Size [][] You can choose between Superfine, Fine and Normal. m°( [0,R0 44) s, i,s,100,L,,,..,,,E Open the menu and select [CARD SET UP]. Select [SI QUALITY], [SUPER FINE] or [NORMAL] set it to and close the menu. Changing th_ 5ti!! Image 5i_e You can choose between 1024 × 768 pixels and 640 × 480 pixels. (_[344) F I L II Open the menu I and select [CARD SET UP]. Select [SI SIZE[, set it to [640 × 480] and close the menu.
PAGE 102
O The indication may not decrease even though a recording has been made, or may decrease by 2 images at once. 0 All indicators are displayed in green when a memory card is played back. 0 _ The remaining image capacity indicates the number of still _mages, even when movies are recorded F I_!_Ch anging the MovieSize You can choose between 320 x 240 pixels and 160 x 120 pixels. Open the menu and select [CARD SET UP]. Select [MOVIE SIZE], set it to [160 x 120] and close the menu.
PAGE 103
When you record 3images onthesupplied memory card. 4 _ Wlaer_Ya°Udrreep_ar: :lneimmagm¢l rY _ 101-0104 101_0101 .............................................. ........ _,_, _ _1_ _¸, .................... ,:_,_,_,,,_,,,, _M_'_([,,_ 44) I C_RD S_T TO change the setting, UP I_IFIL_ NOS .... CONTINUOUS I open the menu and select [CARD SET UP]. Select [FILE NOS.], set it to [RESET] and close the menu.
PAGE 104
Recording Still Images on a Memory Card [] [] F You can record camcorder, ([_ still images from 105), or from DV terminal H a tape with the Card access PHOTO button in the camcorder devices connected or AV terminal ([._ via the 106).
PAGE 105
R_rdi_g _mm _ Tag_ in _he CamCQrder You can record images from a tape in the camcorder as still images on a memory card. 4 1. Set the camcorder to PLAY (VCR) mode. 2. Play back the tape. 3. Press the PHOTO button halfway when the scene you wish to record appears. • The camcorder pauses playback The remaining image capacity and other information appear • When you press the PHOTObutton on the wireless controlle_; recording starts immediately 4. Press the PHOTO button fully.
PAGE 106
You can record images from devices connected via the S-video terminal (analog line-in function), H or AV terminal or via the DV terminal as still images on a memory card. When recording the AV terminal, make sure that DV" "AV,_ is dBplayed on the screen Whenvia recording via the DV terminal, make"AV,_ sure that DV" is not displayed Change the setting as necessary ([_:_ 93) 2 IIL 1. Connect the camcorder to the video device.
PAGE 107
RecordingPanoramicImages (Stitch Assist Mode) [] 4 You can shoot a series of overlapping images and merge them into one large panoramic scene using the supplied software (PhotoStitch) on a computer, When Recording in Stitch Assist Mode: PhotoStitch detects the overlapping portion of adjoining images and merges them. Try to include a distinctive item (landmark, etc.) in the overlapping portion. I 1. Set the camcorder 2. Press the _ to CARD CAMERA mode. button. Ml_ SHow 3.
PAGE 108
O Compose each image so that it overlaps 30 to 50% of the adjoining image Try F m 108 to keep the vertical misalignment within 10% O Do not include moving subject in the overlapping portion O Do not try to stitch images that include both distant and close subjects.
PAGE 109
_n'_rdRecordingMotion JPEGMovies ona Memory Card[] [] You can record Motion JPEG movies with the camcorder, from a tape in the camcorder ([Z[]3110), or from devices connected via the AV terminal (analog line-in) or the DV terminal(L_ H 110).
PAGE 110
R_r_rrlinn frnm _ T_n_ in th_ ('_mr_rrl_r You can record movies from a tape in the camcorder on a memory card, F 1. Set the camcorder to PLAY (VCR) mode. 2. Play back the tape. 3. Press the start/stop button when the scene you wish to record appears. You can record u _to 10 seconds in 320 x 240 and up to 30 seconds in t60 x 120 4. Press the start/stop to stop recording.
PAGE 111
Playing Back a Memory Card You can play back memory card images on the LCD screen, viewfinder connected _ screen (see Playing Back on a TV Screen (_ [] [] screen, or on a 41) ) 4 You can display a single image (single image display [[]3 111), 6 at one time (index screen _ 112), or one after another (slide show _ 112).
PAGE 112
Index Semen F 1. In single image display, press the [] (index screen) [] button. • Up to 6 images appear • _ Movies are displayed with the first scene as a still image indicated by "_ " 2. Press the CARD +/- button to change the image selection. 3. Move the G_ mark to the image you wish to view. • Turn the selector dial up to move to the next image and down to move to the prewous image • Turning the selector dial up on the last image displays the next index screen.
PAGE 113
C_d Jump Euncti_n_ You can locate still images/movies without displaying them one by one. The number in the upper right of the screen indicates the image number of the current image by the total number of images, 4 In single image display, press and hold the CARD + or CARD - button. • Pressthe CARD + button to jump forward and the CARD - button to jump backward.
PAGE 114
Protecting F Images [] [] You can protect important images from accidental erasure during single image display or index screen display, H if a memory card is formatted, all images, even protected ones, will be erased permanently. 0 The sample images recorded on the supplied SD Memory Card are already protected 0 I_Movies can only be protected when the first or last scene is displayed as a still image.
PAGE 115
Erasing Images [] [] 4 You can erase images singly or all at once, H Be careful when erasing images. Erased images cannot be recovered. Q Protected images cannot be erased O _ Movies can only be erased when the first or last scene is displayed as a still image They cannot be erased in playback pause mode O Make sure to insert a memory card that contains images.
PAGE 116
Selecting Still Images for Printing (Print Order) [] [] F You can select still images for printing and set the number of copies These print order settings are compatible with the Digital Print Order Format (DPOF) standards. H O sure toofinsert memory contains _mages O Make A maximum 200 astill imagescard can that be selected O _ Movies cannot be printed r 1. Select the still image you wish to print. 2. Press the selector dial to open the FILE OPERATION 3. Select [i_ PRINT ORDER]. 4.
PAGE 117
E_iBg A!! _[i_ Qrd_[_ ....,_ _ _A00 oPE°A.,oNs I_loP0,.. ORO_OS A._°AOE 4 1. In single image display, open the menu 2. Select [_ and select ]CARD OPERATIONS]. PRINT ORDERS ALL ERASE]. "ERASEALL i_ PRINTORDERS?", [NO] and [YES]appears 3. Select [YES]. All " i_ " disappear. 4. Select [4= RETURN] to close the menu.
PAGE 118
Printing F with the Direct Print Function [] [] You can print still images by connecting the camcorder to a Canon Bubble Jet Printer with Direct Print function The Direct Print function can a?so be used with the print order settings ([_] 116). H O Observe the following be performed correctly precautions during printing, otherwise printing may not - Do not turn off the camcorder or the printer - Do not change the position of the TAPE/CARD switch - Do not detach the cable.
PAGE 119
1. In single image display, select the still image you 4 wish to print and press the selector dial. The print setting menu appears. 2. Set the number of copies and the print style. • Selecting the Number of Copies • Setting the PrintStyle 3. Select [Print] and press the selector dial. Printing starts The print setting menu disappears when printing is complete.
PAGE 120
1. In the print setting menu, turn the selector dial to select [Style] and pressthe selector dial. 2. Make sure that D is selected and press the selector dial. 3. Turn the selector dial to select the paper size and pressthe selector dial. 4. Pressthe MENU button. Youreturn to the print setting menu _!_i_g th_ _ord_rs; 1. In the print setting menu, turn the selector dial to select [Style] and press the selector dial. 2. Select _ and press the selector dial. m 3.
PAGE 121
_rinting with Pdnt-Orde_$_ttings You can print still images you have selected with the Print Order function. If you wish to print more than 1 copy, set the number of copies in the print order ([_] 116). 4 .............................................. ................................................................. I ................................... .................................. MENU([El 44) [,,k_ PRINT 1. Connect the printer to the camcorder ([:[:3 118). 2. Press the MENU button. 3.
PAGE 122
Combining F Images (Card Mix) [] [] You can produce effects not possible with just a tape with the Card Mix function. Choose one of the sample images provided on the supplied SD Memory Card (such as picture frames, backgrounds and animations) and combine it with the live video recording. H C) Mix Movies cannot be used inonthe Night and Super Night MC) mode.
PAGE 123
Card Luminance Key (CARD LUML) Combines illustrations or title with your recordings. The live video recording will appear in place of the light area of the card mix image. You can create your own title or illustration by drawing on a white paper and recording it to the memory card. 4 Mix level adjustment: light area of the still image. Livevideo recording Camera Combines curtain, Chroma Key (CAM.
PAGE 124
5electing _h_ Card Mix Effect (_44 1. Set the program 2. Open selector to [_. _[_ the menu and select [=_ CARD MIX]. The card mix menu appears 3. Select the image you wish to combine II. _\_. with the CARD +/- button. 4. Select [MIX TYPE]. [CARD CHROMA], [CARD LUMI ], ]CAM CHROMA] and ]C. ANiMATiON] appears 5. Select the mix type matching the image you have selected ([22 132).
PAGE 125
Movie: 1. Press the start/stop button to begin recording. The combined image is recorded on the tape 2. Press the start/stop button 4 to end recording. Still image: 1. Press the PHOTO button halfway. 0 flashes in white and turns green when focus is adjusted 2.
PAGE 126
Copying F Still Images [] [] You can copy still images from tape to memory card, or from memory card to tape. O All still images from the selected still image onward will be copied O The image size of a still image copied from tape to memory card will be 640 x 48O O The data code of the still image reflects the date and time it has been copied Cnnvinn _till Im_n_frnm T_n_ tn M_mnrvC_rd Insert a memory card with enough remaining capacity, and load a recorded cassette. 1.
PAGE 127
¢_pying 5_i!1!magus from M_mo_ Card _ Tap_ Load a cassette with enough free space, and insert a recorded memory card. Make 4 sure that the protect tab on the cassette is set to allow recordin .............................................. ................................................................. I ................................... .................................. 1. Select the first still image you wish to copy with the CARD +/- buttons.
PAGE 128
Formatting a Memory Card [] [] Format new memory cards, or when you get the message "CARD ERROR". You can also format a memory card to erase all images recorded on it. The camcorder formats memory cards in the Design rule for Camera File system (DCF) standard.
PAGE 129
Connecting to a Computer Using a USB Cable You can download images from the memory card to a computer using the supplied USBcable, With the supplied software, you can easily download, browse and archive 4 images, and arrange still images for printout, For instructions on how to connect install and operate DISK Software the software, Instruction the camcorder to the computer, and refer to the DIGITAL VIDEO SOLUTION Manual.
PAGE 130
Creating F a Start.up Image You can create a start-up image using a still image on the memory card or a sample start-up image provided on the DiGiTAL VIDEO SOLUTION DISK and save it as [MY IMAGE] O Make sure to insert a memory card with enough remaining capacity O Before you create a start-up image, you need to record a still image on the memory card O Retain the original data of the still image you have set as the start-up _mage on your computer or removable disk. .....................................
PAGE 131
Memory Card Information tmages recorded on a memory card with this camcorder can be transferred computer using the following PCCard Adapter: to a products for SD Memory Cards or MuitiMediaCards: An adapter to insert a memory card into the card slot on the computer. USBReaderNVriter: Connects to the USBport of a computer for direct accessto the memory card. FD Adapter: An adapter to insert a memory card into the floppy disk drive on the computer.
PAGE 132
F _amgle Images ....... 27 sample images are pre-recorded on the supplied SD Memory Card: 8 card chroma key images, 5 card luminance key images, 2 camera chroma key images and 12 card animation images.
PAGE 133
H The sample images recorded on the supplied SD Memory Card are intended only for the personal use with this camcorder Do not use these sample images for other purposes if you have mistakenly erased the Card Mix sample images on the supplied SD Memory Card, they can be downloaded from the homepage http://www cano ndv.
PAGE 134
Screen F Displays [] LCD Screen DLsplay_ You can hide the displays on the LCD screen to have a clear screen for playback. Open the menu and select [DISPLAY SET UP]. Select [DISPLAYS], set it to [OFF ] and close the menu. • The LCD screen will become completely blank (also the %/screen if connected) • Warning messages still appea_ and the data code appears if turned on • Tape operation displays appear for 2 seconds.
PAGE 135
5cm_n Displays dud_g BasicRe¢_rding_/ayb_¢k _ indicates flashing.
PAGE 136
CAMERA Mode ............................................................................................ " _69 ................................... _ ......... Recording reminder/ Image stablhzer { ) Self4imer countdown (_] 705/ ..................................................................................... Photo recording timer (_ 55) Z_°_,;_(;07)7) ] ........................ Recording mode As, ........................................................ Program AE (_ 57) ............................
PAGE 137
._ _ CARD CAMERA Mode ............................................... St tch assist (D3107 ............................................................................................ Recording on a memory card (ra 04) ...... .................... Still image quality (= 101) Loom _uJ_u) ..................................................................... Rema n ng card capac ty (=101) Program AE (= 57)__ _. _........ m _'P_>>>>G_0]I Still image size A_ SMITI tLM//) .................................
PAGE 138
List F of Messages Message SET THE TIME ZONE, DATE AND TiME Explanation You have not set the time zone, date and time, This message appears each time you turn the power on until you set the time zone, date and time_ _[_ 25 CHANGE THE BATTERY PACK Battery pack_ 16 THE TAPE IS SET FOR ERASURE PREVENTION Cassette is protected.
PAGE 139
_ Memory Card Related Messages Message NO CARD Memory THE TAPE IS SET FOR ERASURE PREVENTION SD Memory Card is set for erasure prevention. Replace the card or change the position of the protect switch. 100 NO iMAGES No images are recorded 111 CARD ERROR A memory card error occurred. The camcorder cannot record or play hack the image. The error may be temporary. If the message disappears after 4 seconds and _flashes red, turn the camcorder off, remove the card and reinsert the card.
PAGE 140
F Message No Paper Explanation Paper cassette is not correctly inserted or is out of paper. Paper Jam The paper jammed No ink The ink cartridge Communication m 140 Error during printing. is not inserted or is out of ink. The printer is experiencing a data transmission error. Could not print X images You attempted to use the print order settings to print X images that were made with another camcorder, have a different format or were edited on a computer.
PAGE 141
Maintenance O Do not carry the camcorder by the LCD panel or viewfindeL O Do not leave the camcorder in places subject to high temperatures, such as a sunheated car, and high humidity. O Do not use the camcorder in places subject to magnetic or electric fields such as near the TV transmitters or portable communication O Do not point the lens or viewfinder devices. at strong light sources. Do not leave the camcorder pointed at a bright subject. O Do not use the camcorder in dusty or sandy places.
PAGE 142
m O At cold temperatures, the screen may be darker than usual. This is not a malfunction. The screen returns to normal when the camcorder warms up. Viewfinder C) Rotate the viewfinder upward. Remove the protect cover and clean the glass with a cotton swab. Reattach the protect cover when finished. C) Be careful not to scratch the glass when cleaning. Video Heads O When the playback picture becomes distorted, the video heads need to be cleaned.
PAGE 143
Moving the camcorder rapidly between hot and cold temperature condensation may cause (water droplets) to form on its internal surfaces Stop using the camcorder if condensation Condensation may form is detected. Continued use may damage the camcorder, in the following cases: When the camcorder is moved from an When the camcorder is moved from a air-conditioned cold place to a warm room room to a warm.
PAGE 144
Power Sources You can packs use the power operate the camcorder andV to charge battery in compact any country with adapter power to supply between 100 and 240 AC, 50/60 Hz. Consult the Canon Service Center for information Playback on plug adapters for overseas use. on a TV Screen You can only play back your recordings on TVs with NTSCsystem.
PAGE 145
Troubleshooting If you have a problem or a Canon with Service Center your camcorder, if the problem refer to this checklist. Consult your dealer [_ persists. Power Source Problem Camcorder will Solution Cause not turn Battery pack Replace or charge the battery pack. is exhausted, on, The camcorder off by itself. switches Cassette compartment will not open, 16 Battery pack is not correctly attached. Attach the battery correctly. Battery pack is exhausted.
PAGE 146
F Recording Problem Cause Solution Set the camcorder to CAMERA mode. [_ Time zone, date and time are not set. or the backup battery is exhausted. Set the time zone, date and time, or replace the backup battery and reset the date and time. 25 Camcorder Turn on the power. Load a cassette. 28 Image will not appear on the screen. Camcorder is not set to :AMERA mode. "Set the time zone. date and time" appears on the screen, Pressing the start/stop button will not start recording. Camcorder focus.
PAGE 147
¢r_;31E4Memo_ Card Operatiom Problem Memory card was not the correct direction. Memory card cannot be recorded. Memory Memory card cannot be played back. card CD 1oo Solution Cause Memory card cannot be inserted, facing is full. Turn the memory and reinsert it. Replace erase the card memory over card or 115 images. Memory card is not formatted. Format card. 128 Memory card is not inserted. File number reached maximum value.
PAGE 148
System Diagram (Availability differs from area to area) WS-20 Wrist Strap _ide SS-800 Shoulder Strap D WD-30.5 Wideconverter e, WL=D79 W+re+ess Controt+er 1_1'_"9Jll W L=De0 Wire+ess Contrcker D Battery Charger C8=570 MiniDV TL-30.5 Teieconverter Car Battery Cassette Video 00 CA-570 7 Power Cable Compact Adapter FS-30.
PAGE 149
Optional Accessories Call or visit your local retailer/dealer for genuine Canon video accessories, You can also obtain genuine accessories for your Canon camcorder by calling: 1-800-828-4040, Canon U.S.A. information Center BP-500 Series Battery Packs When you need extra battery packs, select from the following: CG-570 BP-512 BP-535 BP-511, BP-512, BP-522 or BP-535.
PAGE 150
WD-30.S Wide-converter This lens decreases focal length by a factor of 0.7, giving you a wide perspective for indoor shots or panoramic views. FS-30.SU Filter Set Neutral density and MC protector filters help you to control difficult lighting conditions. VL-10Li Battery Video Light This compact yet powerful video light can be used for both indoor and outdoor shooting. The video light is powered by BP-900 series battery packs. • Approximate usage time: BP-915:60 min. BP-930:120 min. BP-945:170 min.
PAGE 151
SC-1000 Soft Carrying Case A handy camcorder bag with padded compartments accessories. SC-A50 Soft Carrying This lightweight within 4 and plenty of space for Case bag keeps the camcorder easy reach without weighing you down or getting in the way. This mark identifies genuine Canon video accessories. When you use Canon video equipment, we recommend Canon-brand ÷o_ G_ o_o'_w'_'_ accessories or products bearing the same mark.
PAGE 152
Specifications _ ZR_Q M_ZR65 MC/ZR_Q Power supply (rated): 74 V DC Power consumption (AF turned on): 29 W (Using viewflnde0, Television system: EIA standa;d (525 lines, 60 fields) NTSC color signal Video recording system: 2 _otary heads, helical scanning DV system (Consumel digital VCR SD system); Digital component recording Audio recording system: PCM digital sound: 16 bit (48 kHz22 oh); 12 bit (32 kHz24 oh) Image sensor: 1/6" CCD (cha_ge coupled device), approx 680,000 pixels (Effective pixe
PAGE 153
USB terrninal*_: mini-B DV terminal input/output: Special 4-pin connector (IEEE1394 compliant) AV terminal input/output: _35 mm miniiack Audio input: -10 dSV/40 kohms or more Audio output: -10 dBV (47 kohm Eoad)/3 kohms or less Video: 1 Vp-p/75 ohms unbalanced S-video terminal input/output: 1 Vp-p/75 ohms (Y signal)_ 0¸286 Vp-p/75 ohms (C signal) MIC terminal input: _35 mm stereo mini-jack -57 dBV (with 600 ohm mic)/5 kohms or more Headphone _35 mm stereo miniiack terminal: Operatin 9 tempera
PAGE 154
Index 12bitaudio....16..9 wide screen " .........98 6-second auto date ......... 52 84 Digital zoom ................. Direct print function *2 ........ DV dubbing .................. DV terminal ............... 30 118 90 88, 99 D Abroad, using the camcorder Accessories. ........... Accessory shoe ........... Advanced accessory shoe ,I Analog line-in .............. Analog-digital converter. ..... Assist lamp ,I .............. Audio dubbing ........... Audio mode ............. Auto ...................
PAGE 155
Menus ................. Microphone ............. MICterminal ............ Movie size.1 ............ MultiMediaCard *2 ........ Multi-image screen ........ My Camera settings ........ 44 71 71 102 101 67 50 12] Night mode .................. 59 Output channel ............... 43 Search select ............. Self-timer ................ Shutter sound *2 ............. 85 70 105 Shutter speed ................ Slide show *2 ................ SP mode .................... Speaker .....................
PAGE 156
[ U.S.A.
PAGE 157
LCANADA J CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY Jhe irr_i_ed warranty set forh below _sgven by Canon ana_a In (anon and_a ) witl- espec{ tv Canon d gi_al vdeo equipment purchased in Canada lhi_ limited Wd_lanty s only eff_ tire u_on presentation of a _ill of sale or other p_oof of pUlChaSe for this Canon digital video equipment to a Canon %rvce FacJlJt y when repallS are requJl_l Canon consumer vi_leo dig ta_ e_u pment is wan anted under normal non commer_ al per ,ona[ use aga r_t d_
PAGE 158
CANON INC. U.S.A. CANON U,S.A., 100 Jamesburg INC, NEW JERSEY OFFICE Road, Jamesburg, NJ 08831 CANON U.S.A., 100 Park Bird, USA INC. CHICAGO OFFICE Itasca, IL 60143 CANON U.S.A., USA INC. LOS ANGELES OFFICE 15955 AIto_ Parkwa_ Irvine, CA 92618 USA CANON U.S.A., INC. HONOLULU OFRCE 210 Ward Avenue, Suite 200, Honolulu, HI 96814 USA • if you have any questions, call the Canon U.S.A. information Center toll-free at 1-800-828-4040 (U.S.A. only). CANADA CANON CANADA INC.