Owner's Manual

Battery Grip BG-E11
[§I Instructions
Thank you for purchasing a Canon product.
The BG-E11 is a battery grip that can hold two Battery Pack LP-E6
or six size-AA/LR6 batteries. It is also equipped with a vertical-grip
shutter button, Main Dial, etc. to enable shooting in the same way
as with horizontal grip.
• Attaching to the Camera
1. Remove the battery from the camera (Fig. 1 ).
2. Detach the camera 's battery compartment cover (Fig. 2).
3. Store
the removed battery compartment cover in the storage
slot.
• Push
the lock lever of the battery compartment cover
as shown by the arrow , insert the cover into the battery
compartment cover holder (CD in Fig. 3-1 ), and press on the
cover until it snaps into place( ® in Fig. 3-1 ).
• To remove the battery compartment cover, slide the battery
compartment cover release lever to unlock it (Fig. 3-2), and
then remove the cover by performing the storage procedure
in reverse.
4.
Remove the protective cover, and then insert the electrical
contacts into
the battery compartment (Fig. 4- CD ).
5. Align the attachment sc r ew with the camera's tripod socket ,
and then turn the attach/detach knob to tighten securely to th e
camera (Fig.
4-® )
0
• Be sure to attach the battery griptothe ;camera before
inserting the batteries. The results ofthe battery check
may not be displayed properly ifyouattach the battery
grip to the camera with the batteries already inside.
•
Before removing the bqttery grip from:· the camerq, be
sure to ' t!Jrn the camwa's powe r swit<:;hto <OFF;:. .. and
take out the batteries. After removiog. the batteries, attach
the protective
cover to the el ect riC.a lcoo tacts .
• Installing the Battery Packs
1. After flipping out the release handle, turn it as shown by the
arrow, and then pull out the battery magazi ne (f or size-AA/LR6
batteries) (Fig. 5) .
2.
In
se rt one or two Batt ery Pack LP-E6 into the battery magazine
(for LP-E 6) (Fig. 6).
3. Attach the ba
tt ery magaz i ne into the battery grip (Fig. 7-1 ).
After attac hing, check that the batte ry magazine is securely
attached to the battery gr ip.
4.
Close the release handle (Fig. 7-2).
[i] • If. only one battery is used, it may be insert~ 1n ' either the
right or l eft side.
• If two batteries are inserted, po wer is suppHed
simultaneously
by both batteries. Two batteries With
different charging levels can
be inserted and used
without any problems . · ·
•
Remove,
the battery packs LP~E6 or size- .. ~vM + ~t? .
l:>!ltteries frqrT) th .e battery grip .when the p;:!fu!'lr~ : ~iU not
be used for an extended period.
• Inserting Size-AAILR6 Batteries
1. Insert the batteries into the battery magazine (for size-AA/LR6
batteries) (Fig. 8).
Make sure the + and - battery contacts are prop erly oriented as
shown in the illustration.
2. Attach
the battery magazine into the battery grip (Fig. 9-1 ).
After attaching, check that the battery magazine is securely
attached to the battery grip.
3.
Clo
se the rel ease handle (Fig. 9-2).
0 • When size-AA/LR6 batteries
confinuoussfl()()tii'\g '
speedduri
s low er . · . ... . ·• ···· ......
• Be
causeth e number dfpossibie sb~ ·
when using s iz . e ~ AA/LR6 batterie ··
r ecom mended . only for emergen
Live View shooting,
and . movie sho
possible shots (movie recording ti
De pending : on the battery bram:l a
the number ofpossible shots may _
•
With
siz e ·AAILR6 battedes,. us e ·
the·salt1e
1
br a nd ·aME!It1peratl.ires
camera m'i!YnotfunGtionWhe
..
or When old ' ilnd new batteries a