Instructions ENG
Thank you for purchasing a Canon product. Canon RF16mm F2.8 STM is a ultra-wide lens for use with EOS R series cameras. zz“STM” stands for Stepping Motor. Conventions used in these instructions Warning to prevent lens or camera malfunction or damage. Supplementary notes on using the lens and taking pictures. Camera Firmware and Camera Applications Please use the latest versions of firmware and applications with the camera in use.
Safety Precautions Precautions to ensure that the camera is used safely. Read these precautions thoroughly. Make sure all details are observed in order to prevent risks and injury to the user and other people. Warning Details pertaining to risks that may result in death or serious injury. zz Do not look directly at the sun or other strong light sources through a lens. This may result in loss of sight. zz Do not leave a lens in the sun without the lens cap attached.
General Precautions Handling Precautions Shooting Precautions zz Do not leave the product in excessive heat such as in a car in direct sunlight. High temperatures can cause the product to malfunction. zz If the lens is taken from a cold environment into a warm one, condensation may develop on the lens surface and internal parts. To prevent condensation in this case, first put the lens into an airtight plastic bag before taking it from a cold to warm environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment.
Nomenclature Focusing/control ring (→ 7) Hood mount (→ 9) Filter mounting thread (→ 10) Focusing/control selector switch (→ 7) Lens mount index (→ 6) Contacts (→ 6) Lens mount (→ 6) zz For detailed information, reference page numbers are provided in parentheses (→ **).
1. Attaching and Detaching the Lens Lens mount index Lens release button Dust cap Attaching the Lens Align the lens mount indexes of the lens and camera, and turn the lens clockwise until you hear a click. Detaching the Lens Turn the lens counterclockwise while pressing the camera’s lens release button. Detach the lens once it has stopped turning. zzSet the camera’s power switch to OFF when attaching or detaching the lens. zzAttach the lens cap before detaching the lens from the camera.
2. Focusing/control ring The focusing/control ring can be used as either a focusing ring or a control ring. Focusing/control ring Focusing/control selector switch Use as a Focusing Ring Set the focusing/control selector switch to FOCUS. Set the focus mode (AF/MF) using the camera’s menu. To shoot in autofocus (AF) mode, set the camera’s focus mode to AF. To use only manual focusing (MF), set the camera’s focus mode to MF, and focus by turning the focusing ring (focusing/control ring).
Focusing/control ring The focusing/control ring can be used as either a focusing ring or a control ring. Focusing/control ring Focusing/control selector switch Use as a Control Ring Set the focusing/control selector switch to CONTROL. Set the control ring function using the camera’s menu. The control ring can be assigned the functions that are commonly used with cameras, such as shutter speed and aperture settings. Please refer to the camera’s instructions for details on how to use the control ring.
3. Hood (Sold separately) The custom lens hood reduces unwanted light that causes flare and ghosting and protects the front of the lens from rain, snow, and dust. Attachment position mark Red dot Button Red dot Attachment position mark Red dot Stop position mark Attaching the Hood Align the red attachment position mark on the hood with the red dot on the front of the lens, and then turn the hood in the direction of the arrow until you hear a click.
4. Filters (Sold separately) You can attach filters to the filter mounting thread on the front of the lens. zzOnly one filter may be attached.
Specifications Focal Length/Aperture Lens Construction Maximum Aperture Minimum Aperture Angle of View Min. Focusing Distance Max. Magnification Field of View Filter Diameter Max. Diameter and Length Weight Hood Lens Cap Case 16mm f/2.8 7 groups, 9 elements f/2.8 f/22 Horizontal: 98°, Vertical: 74° 10', Diagonal: 108° 10' 0.13 m/0.43 ft. 0.26x Approx. 135 x 90 mm/5.31 x 3.54 in. (at 0.13 m/0.42 ft.) 43 mm Approx. 69.2 x 40.2 mm/2.72 x 1.58 in. (When the lens is retracted) Approx. 165 g/5.8 oz.
Specifications zz The lens length is measured from the lens mount surface to the front end of the lens. Add +23.4 mm/0.92 in. when including the lens cap and dust cap. zz The maximum diameter, length and weight listed are for the lens itself only. zz You cannot use extenders. zz Close-up Lens 250D/500D cannot be attached because there is no size that fits the lens. zz This lens cannot be used for multiple exposure shooting.
CT1-D228-A 0721Ni © CANON INC.
1111111111111111111111111111111111 CT1 B076A CT1-8076-A © CANON INC. 2018 PRINTED IN TAIWAN Canon Interchangeable Lens Instructions These instructions describe important safety notes for Canon interchangeable lenses* and basic instructions on how to handle those lenses. For more detailed information, refer to the instructions for each lens. Instructions for your lens can be downloaded from the Canon website below: *EF (EF-S) lenses, EF-M lenses, RF lenses http://www.canon.com/icpd/ Canon ®(O ·_.
Complete this card at time of sale.
CANON U.S.A., INC. CANON CANADA INC. NAME NOM ADDRESS ADRESSE CITY VILLE THESE ARE NOT REGISTRATION CARDS - Retain for your Records CES CARTES NE SONT PAS GELLES POUR L'.ENREGISTREMENT. - Les conserver comme reference. DEALER'S NAME & ADDRESS MARCHAND NOM & ADRESSE POSTAL CODE CODE POSTAL PROVINCE MODEL MODELE RF1 6/2.8 STM BODY NO.
des objectifs EF et des accessoires de CANON®Canon Garantie limitee Pour les Etats-Unis et le Canada seulement a regard des objectifs EF de marque Canon, des accessoires livres avec cette garantie limitee (coUectivement les" produ1ts •), lorsqu'ils sont achetes et utilises aux Etats-Ums ou au Canada Les produrts sont les seuls auxquels cette garantie hmitee s'appllque. La presente garanlie limitee est fournie par Canon U.S.A., Inc. (Canon U.S.A.) aux Etats-Unis ou Canon Ganada, Inc.
Canon U.S.A. You may obtain technical support for your Products as follows: • Internet support at www.usa.canon.com/support (E-mail support also available) • Telephone assistance from a Canon U.S.A. Customer Care representative free of charge during regular business hours at 1-800-OK-CANON (1-800-652-2666). Canon Canada You may obtain technical support for your Products as follows: • Internet support for English at www.canon.
Ca11011 CANON®EF Lens and Accessories Limited WarrantyFor U.S.A. & Canada Only The limited warranty set forth below is given by Canon U.S.A., Inc. (Canon U.S.A.) in the United States or Canon Canada, Inc. (Canon Canada) in Canada with respect to the Canon brand EF Lens, as well as with respect to the accessories packaged with this hm1ted warranty (collectively the "Products"), when purchased and used in the United States or Canada. The Products are the only Products to which this limited warranty applies.
Register Now! Visit www.registercanon.com to register your new EF & EF-S Lenses today and receive the following: • • • • l:-' Telephone support* E-mail support* Product protection* Receive information on new products and promotions* There is no charge to register or for the benefits offered. * These benefits valid in the U.S. only. Please read the Terms and Conditions at www.registercanon.com for complete details. -For accessories and other supplies visit www.estore.usa.canon.