Instant Camera Printer User Manual
CONTENT SAFETY INFORMATION P. 3-4 Read Before Use OVERVIEW P. 5 Supplied Items Product Features SETUP P. 6-9 Charging Loading Paper External Memory OPERATION P. 10-15 Power ON/OFF Taking and Printing a Photo Viewfinder Selfie Mirror Shooting Modes Filter and Border Buttons Live View Shoot LED INDICATOR P. 16-18 Troubleshooting SPECIFICATIONS P. 19 INSTALLING APP P. 20-21 PAIRING MOBILE DEVICE & INSTANT CAMERA PRINTER P.
SAFETY INFORMATION READ BEFORE USE Please read the following instructions and safety precautions before using the device. For regulatory and additional safety information, refer to the Regulation and Warranty Information sheet included in your package contents. RMN: PP2002 Regulatory Model Identification Number is assigned for regulatory identification purpose. WARNING Used to indicate a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION Used to indicate the level of a hazard or damage which, if product is handled erroneously, may result in injury or property damage other than product faults. • When operating in extreme weather, the device might not print. Let the printer temperature adjust to the recommended operating temperature of 59º to 90ºF (15º to 32ºC), before attempting to print again. • When charging, please charge the device at the recommended temperature of 59º to 90ºF (15º to 32ºC).
OVERVIEW SUPPLIED ITEMS Instant Camera Printer Quick Start Guide Regulation and Warranty Information sheet CANON ZINK® Photo Paper (10 sheet) USB Cable Wrist Strap PRODUCT FEATURES 3 2 4 5 1 6 7 8 9 5 1 2 3 4 Camera Lens Viewfinder Selfie Mirror Border Button Ring Light (8 LEDs) Filter Button Print Output Slot 5 Wristband Eyelet Speaker Reset Button 6 7 8 9 Status LED MicroSD Card Slot (up to 256GB) Slide Switch Charging Status LED Power Button Micro USB Port Shutter Butto
SETUP CHARGING Charging status LED Charging: Red Fully Charged: Green The device has a built-in battery. Please fully charge the device via the USB cable provided before using. Insert the smaller end of the supplied USB cable into the device and other end into a chargeable USB adapter. The charging LED light will turn red to indicate charging. Once fully charged, the charging LED will turn green. − Operating time may vary depending on the battery status, operational status and environment conditions.
LOADING PAPER 1 Remove the cover by sliding it forward in the direction of the arrow. 2 Open a single pouch of photo paper (10 sheets + blue SMART SHEET®). 3 Place all 10 photo paper sheets and the one blue SMART SHEET® into the photo paper compartment. − Stack the photo paper on top of the blue SMART SHEET®, making sure the barcode and the photo paper logos are facing down. 4 Place the top cover back onto the device. It should click into place when closed properly.
EXTERNAL MEMORY An external MicroSD card (up to 256 GB) is needed for saving captured photos. Only FAT16, FAT32 and exFAT format are supported. PREPARING A MEMORY CARD Use the following memory cards (sold separately) • MicroSD memory cards *1 • MicroSDHC memory cards *1 *2 • MicroSDXC memory cards *1 *2 *1 Cards conforming to SD standards. However, not all memory cards have been verified to work with the camera. *2 UHS-I memory cards are also supported.
NOTE WHEN USING PHOTO PAPER • Only load 10 photo paper sheets and 1 blue SMART SHEET®. Do not load more as it can result in paper jams or printing errors. • For optimal print results, use photo paper for Canon Ivy. − You may purchase additional photo papers within the Canon Mini Print App by tapping "Buy Paper" in the main menu. • If there is a paper jam, simply turn the printer OFF and ON to automatically clear the paper jam. Don’t try to pull the paper out.
OPERATIONS POWER ON/OFF 1 Press and hold the Power button until the LED indicator light turns on. 2 When the LED indicator turns to a steady white , the device is ready to Use. 3 Press and hold the Power button to turn off the device. AUTO POWER OFF • When the device is idle for about 3 minutes (default), it will automatically power off. User can resume the device by pressing the Power button again. • User can change the time (3 minutes / 5 minutes / 10 minutes) in the APP.
SELFIE MIRROR Compose an image with the frame mark in the Selfie Mirror. 1.6ft - ∞ 2x3 Focusing distance at 1.6ft SHOOTING MODES You can select the different camera modes by the Slide Switch at the top of the device for different scenarios.
FILTER AND BORDER BUTTONS Easily add a filter or border to your photos right on the camera. FILTER User can add either black and white or vivid filter to a photo by pressing taking photo. Without Filter without Border Black & White Filter without Border button before Vivid Filter without Border BORDER • User can add border to a photo by pressing button before taking photo.
LIVE VIEW SHOOT User can remotely control the device through the App such as taking photos. Go to the Home Screen to enter the Live View Page. Selected mode will be shown Live view image Zoom in or out Change orientation Select timer (default: OFF) Take a photo Set filters and borders SHOOT & PRINT Press to capture a photo. And press to confirm to print.
TIMER Press to capture a photo instantly. Press 10 seconds timer (default: OFF), press and select 3 seconds/ 5 seconds/ to begin the countdown. • The LED light around the selfie mirror will alert you if the timer is enabled. ZOOM Press to zoom in.
ORIENTATION Press to switch between horizontal and vertical.
LED INDICATOR Status Power On Mode LED Press and hold Power button Standby After the device is powered on Power Off Press and hold Power button Blue SMART SHEET® Error When the device detects wrong blue SMART SHEET® is inserted, or other blue SMART SHEET® error Processing blue SMART SHEET® When the device is loading blue SMART SHEET® No Paper and no SD card inserted When the device has on paper and no SD card inserted, the device will not allow for taking a photo.
LED INDICATOR Status Mode LED Status LED Temperature Too High When device temperature is too hot Red (Until temperature returns to normal) Temperature Too Low When device temperature is too cold Printer Head Cooling Checking the printer head temperature and letting it cool down before printing Low Battery When battery level down to 20% Firmware Upgrading When the device is updating firmware Cyan (Until temperature returns to normal) Cyan White>Red (Looping) White 17
TROUBLESHOOTING Status MicroSD Card Error Paper Feeding Failed LED Indication Magenta Red Paper Jam Red Printer Cover is not closed properly Connection Remote Control Failed Actions • • • • Check if the MicroSD card is inserted properly Check if the MicroSD card is full Check if the MicroSD card is corrupted Check if the MicroSD card is compatible • Open the paper compartment cover to check if Canon ZINK® photo paper is inserted • Power off and on the device, the photo paper will be fed out aut
SPECIFICATIONS Printing Technology ZINK® Printing Resolution 314 x 600 dpi (dots per inch) Approximately 50 secods - Motor starts and stops, Printing Speed Photo Aspect Ratio at room temperature 77 °F (25 °C) 2" x 3" Canon Photo Paper : ZP-2030-20 (20 sheets) Compatible Paper ZP-2030-50 (50 sheets) / 2" x 3" / Peel-and-Stick Back Paper Capacity Up to 10 sheets of photo paper + 1 blue SMART SHEET® Photo Resolution 8MP Focal Length 2.6mm Aperture f 2.
INSTALLING APP OPTION ① SEARCH FOR "CANON MINI PRINT" IN APP STORES For Android™ - from Google Play™ For iOS® - from the App Store® 20
OPTION ② USING QR CODE - SCAN THE QR CODE ON THE "QUICK START GUIDE" For Android For iOS OPTION ③ GO TO HTTPS://APP.CANONMINIPRINT.
PAIRING MOBILE DEVICE & INSTANT CAMERA PRINTER Android and iOS Pairing Turn on the printer by pressing and holding the Power button until the status LED light turns on. Open mobile device "Settings" to enable Bluetooth and pair it with the printer. Pair - Tap on the icon on the top right corner and choose your printer. The icon will change to indicate battery level after connected.
Reconnect Printer - The printer will automatically reconnect to the app once paired already. If the printer has not connect to the app, tap on the icon on the top right corner and choose your printer on the list.
Android Pairing (with NFC) On your mobile device, ensure that NFC and Bluetooth are enabled. Open the Canon Mini Print app. Place your mobile device on top of the printer. Follow the onscreen instructions to complete the pairing and connection for the first time. Or the printer will pair automatically with the mobile device.
USER INTERFACE HOME SCREEN Print Quene Main Menu Printer Status Photo Album Collage Pre-cut Sticker Live View and SD card to print Smartphone Camera MAIN MENU View in-app messages Access paired printer information & settings View Online User Manual & FAQ Purchase photo paper from Online Store Check App version, user Agreement and Privacy Statement Connected Printer - User can check the printer information, customize the printer name, voice and auto power off time at anytime.
PRINTER SETTING When the printer is connected with a mobile device, user can customize the printer name, voice and auto power off time. Tap , select your device to customize the printer name, voice and auto power off time through the App. RENAME User can customize the printer name as you wish.
VOICE The user can customize the sound effects for "Power On", "Power Off", and "Shutter". User can record 3 sound files for printer voice. Tap on the desired sound file icon to apply the sound. Printer To start a recording, tap on the desired sound file icon Press . for audio playback and the playback audio will be automatically selected. AUTO POWER OFF Tap to change the auto power off time.
PHOTO ALBUM You can browse photos in the Photo Album, with filters by folders and search by date. On the Home Screen, Tap to view the Photo Album. Once you’ve selected a photo, you can Print, Edit, Share, or Save. To print, tap . All Photos - Gallery Filter by Folder Search by Date You can also browse from online albums.
SEND A PHOTO TO MINI PRINT APP SEND A PHOTO IN YOUR DEVICE’S PHOTO GALLERY OR CAMERA ROLL TO THE CANON MINI PRINT APP For Android Find a photo in your device Gallery and tap the share button. Tap the Mini Print Icon to send the photo to the app so that you can edit and print. For iOS Find a photo in your device Gallery and tap the share button. OPTION A - Tap "Open in Mini Print" to send the photo to the app editing screen where you can edit and print.
EDIT PHOTO You can customize your image with edits like filters, stickers, text, and more. Tap the icons on the bottom bar of your screen. Customize as you wish. Don’t forget to Save, Share, or Print your changes before you exit the screen.
USING TILE PRINT Use the Tile Print function to print a single photo onto multiple sheets to create a large tiled photo. When you're ready to print, tap on and tap the tiled choice of 2 x 2 or 3 x 3 prints. (Lines will appear to show how your image will be split.) Tap to print your tiles and then put them together to create a larger tiled print.
USING COLLAGE PRINT Use the Collage function to print up to 6 photos on one 2x3 sheet. Tap in Home Screen. Tap on the photos to add into collage. Number of photos selected will be shown. You can choose different template by pressing , or swapping right to left on the image preview. You can also enlarge the preview by swapping the album bar downwards. No. of print Select the template you like and go into edit page by pressing .
Edit and adjust the images in your collage as you'd like and then tap to share or to save.
PRE-CUT STICKER PRINT Use the Pre-cut sticker function to print up the photo/text on the circle sticker. Tap in Home Screen. Tap on the photos to add into the circle sticker. Press to edit the pre-cut sticker.
Adjust the images in your sticker as you'd like and then tap to share or to save.
SMARTPHONE CAMERA On the Home Screen, tap to take a photo with your smartphone camera. (Optional, tap on the icons at the bottom to take a photo with effects.) Once you’ve taken a photo, you can Print, Edit, Share, or Save. To print, tap .
PRINT FROM IVY CLIQ+2 MicroSD CARD On the Home Screen , tap "Go Wireless!", then tap "SD Card to print". Tap on the photo you want to print, then press . You can also delete the photo in microSD card by pressing the Print .
PRINT QUENE To manage your print queue, tap . In the Print queue page, you can Tap to remove photo in print queue To change the print order, tap and hold on a photo, and reposition its order. Tap on the specified photo you would not want to print it at the moment, a pause sign will be shown. Tap to duplicate a photo Note about Print Queue: Your image will be stored in the Print Queue if your printer is not on and connected when you send a print.
If the device is not functioning properly, please contact the dealer you purchased this product from or Canon Service & Support at www.usa.canon.com/support FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Canon U.S.A., Inc.
