Video Display Setup Guide • Before use, be sure to read this guide, including the safety and handling precautions. • Reading this guide will help you learn to use the video display properly. • Store this guide safely so that you can use it in the future.
About the User Manual for the Display • Setup Guide (this document): This describes the items that should be followed to ensure the display can be used correctly and safely, and how to install and operate the display. Please read before using the display. 2 • Operation Guide (PDF electronic manual): This explains the functions of this display and how to set it up. Please download this from the Canon website. https://www.usa.canon.com/internet/portal/us/home/support/ https://www.canon-europe.
Introduction Thank you for purchasing Canon Video Display. This device is a commercial-use display capable of supporting a wide range of workflows from shooting, through to editing in video production, for both digital cinema and broadcasting. 3 Supplied Accessories The following items are supplied with this product. Please check before using. AC Power Cord AC Power Cord clamp HC-01 Setup Guide (this document) Conventions used in this manual : Indicates a reference page. Note: Indicates a note.
Important Usage Instructions 4 For the customers in the U.S.A. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Safety Instructions and Handling Precautions Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent injury or harm to the operator of the product or others. WARNING Denotes the risk of serious injury or death. • Do not disassemble or modify the video display. Inside, the video display contains high-voltage/extremely hot/movable parts that can cause fire, electric shock, burns or injury.
Safety Instructions and Handling Precautions 6 • Before moving, installing, removing or connecting the video display to peripheral devices, turn off the video display and all connected devices and unplug their power plugs. Failing to do so can cause fire, electric shock or malfunction. • For your safety, unplug the power plug from the power outlet when not using the video display for extended periods of time. Dust buildup on the power plug can cause fire.
Safety Instructions and Handling Precautions When Using the Main Unit • The screen may be damaged if it is left facing strong source of light. Please take precautions when placing it near a window. • Do not press firmly on the screen, scratch it or place an object on the screen. It can cause nonuniformity or damage to the panel. • The screen and cabinet may become warm during use. Note this does not constitute a malfunction.
Names and functions of parts 8 Front face of the main unit 1 2 1 3 4 1 Front stand 2 Channel (CH) button CH1 to CH3 • You can switch between the registered channels (settings related to input signal) with a single push. 3 CDL button • Switches to CDL mode. 4 Function (F) button F1 to F8 • Registered functions are executed with a single push. 5 MENU button, jog dial, RESET button • Changes the OSD menu settings. 5 6 7 8 9 (Power) button • Turns the power on and off.
Names and functions of parts Back face of the main unit q A q A 9 A s d A f A g A h A j A A k a A A q Carrying handle A a Rear stand A s SDI output terminal • Passes through output of the signal input to A d. A d SDI input terminal • Inputs the SDI signal. A f REMOTE terminal • Connects an external control device. A g LAN (10/100 BASE) terminal • Connects an external control device or Canon display.
Setting Up 10 Carrying the video display When carrying the video display, be sure to hold it by the carrying handle. CAUTION • When unpacking, carrying, installing, or connecting the main unit, please note that at least two people are required. • When carrying the video display, handle it carefully so not to touch or damage the screen. Preventing from Tipping CAUTION • When securing the main unit to a table or desk, please ensure the table or desk is strong enough to carry the weight of the main unit.
Setting Up Use a commercially-available belt or strap to fasten it to a wall or other surface 1 Pass a strong, commercially-available belt or strap through both carrying handles on the rear side. 2 Fasten the tips of the belt or strap to a floor or wall. 11 Commercially-available belt or strap Mounting the Main Unit on a Stand or Wall This main unit can be fitted to a stand* or to a wall mount bracket*. Remove the stands beforehand ( 12). * Commercially available.
Setting Up Removing/attaching the stand The stand can be removed when storing the display on a rack or display shelf. 12 CAUTION • Make sure to perform this step with at least two people. • Use a flat, clear surface when attaching/detaching the stands. • The display can tip over if the stand has not been attached. • Avoid touching the screen during this step as it may damage it.
Setting Up Attaching/detaching the AC Power Cord Clamp (provided) Attaching Install the AC power cord clamp before connecting the AC power cord to the main unit. 1 Insert the AC power cord clamp connector into the cord clamp mounting hole (1). 13 1 2 Connect the AC power cord to the main unit (2). 3 Secure the AC power cord in place with the holder (3). • The holder should always be fastened in the position as shown in the illustration. 2 3 4 Press the holder against the main unit (4).
Setting Up Connecting the Main Unit to Input Devices The video display has SDI and HDMI input terminals to connect input devices. 14 CAUTION • Check that the power to the video display and input devices is switched off before connecting an input device to this display's SDI or HDMI input terminal. • Use a HDMI cable with the High Speed logo that complies with the HDMI standard.
Setting Up Turning on the Main Unit's power 1 Plug the provided AC power cord to the AC power supply input terminal at the rear. • The video display goes into standby and the power indicator lights up in amber. 15 2 Press the power supply button at the front. • The power indicator lights green. Note • Warming-up is necessary to stabilize the brightness of the video display. Wait at least 10 minutes after turning on the power before use.
Main specifications/Performance 16 Panel Panel Type IPS LCD panel Screen Size 31.1 inch (78.91 cm) Aspect Ratio 17:9 Resolution 4096x2160 Active Display Area Approximately 698.0 x 368.
Main specifications/Performance Interface Input 12G/6G/3G/HD/ SD-SDI HDMI Output Others 4 BNC (75Ω) receptacle terminal 12G-SDI: Compliant with SMPTE 2082 6G-SDI: Compliant with SMPTE 2081 3G-SDI: Compliant with SMPTE 2048-2/274M/296/372/425-5/425-3/425-1/ 428-19/428-9 HD-SDI: Compliant with SMPTE 2048-2/274M/292-1/296/428-19/428-9 SD-SDI: Compliant with SMPTE 259M 1 type A terminal 17 Contents protection standard: HDCP 2.
Main specifications/Performance Dimensions 749 (29.5) Front 492 (19.4) 470 (18.5) 18 615 (24.2) Rear 200 (7.9) 4-M6 Depth 8 (0.3) (Max.) 121.5 (4.8) 281.5 (11.1) 200 (7.9) Center of panel Side 25.3 (1.0) Bottom 21.1 (0.8) 112.5 (4.4) 295 (11.6) 161.7 (6.4) 335 (13.2) 4- 4.5 (0.2) 15 (0.6) 615 (24.
USA CANON PROFESSIONAL DISPLAY LIMITED WARRANTY FOR PRODUCTS PURCHASED IN THE UNITED STATES The limited warranty set forth below is given by Canon U.S.A., Inc. ('Canon USA') with respect to Canon Professional Display Equipment (the 'Equipment') accompanying this limited warranty in the Equipment’s original container, when purchased in the United States. This limited warranty is only effective upon presentation of your Bill of Sale or other proof of purchase.
This Limited Warranty does not apply to Equipment purchased outside the United States. This Limited Warranty does not apply to accessories or consumables for the Equipment, which are sold "AS IS", without warranty of any kind by Canon USA. Please retain this warranty card and your Bill of Sale as a permanent record of your purchase. This card ensures that you are contacted promptly should there be a safety inspection, modification or product recall under applicable laws or regulations.
CANADA CANON PROFESSIONAL DISPLAY LIMITED WARRANTY FOR PRODUCTS PURCHASED IN CANADA The limited warranty set forth below is given by Canon Canada Inc. ('Canon Canada') with respect to Canon Professional Display Equipment (the 'Equipment') accompanying this limited warranty in the Equipment’s original container, when purchased in Canada. This limited warranty is only effective upon presentation of your bill of sale or other proof of purchase.
This limited warranty does not apply to Equipment purchased outside Canada. This limited warranty does not apply to accessories or consumables for the Equipment, which are sold "AS IS", without warranty or condition of any kind by Canon Canada. Please retain this warranty card and your bill of sale or other proof of purchase as a permanent record of your purchase.
Canon Inc. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Canon Europa N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands USA http://pro.usa.canon.com CANON U.S.A., INC. http://pro.usa.canon.com/support (855) 4K-CANON (855-452-2666) (USA only) PUB. MIM-0060-A MIE-0022-000 http://www.canon-europe.com UNITED KINGDOM Canon UK Ltd Unit 160, Centennial Park, Centennial Avenue, Elstree, Hertfordshire, WD6 3SG 020-7660-0186 © CANON INC.
