User Manual • Please read this manual before operating this scanner. • After you finish reading this manual, store it in a safe place for future reference.
FCC REGULATIONS (For 120V model) ENERGY STAR® Office Equipment Program Document Scanner, Model 6130190 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Model Names Trademarks The following name may be provided for the safety regulations in each sales region of the Document Scanner. R40: Model 6130190 • Canon and the Canon logo are registered trademarks, of Canon Inc. in the United States and may also be trademarks or registered trademarks in other countries. • imageFORMULA is a trademark of CANON ELECTRONICS INC.
Disclaimers The information in this document is subject to change without notice. CANON ELECTRONICS INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR IMPLIED, EXPECT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OF USE OR NON-INFRINGEMENT. CANON ELECTRONICS INC.
Introduction Thank you for purchasing the Canon imageFORMULA Document Scanner. Please read the following manuals carefully and familiarize yourself with the functions of the scanner before use to ensure you sufficiently understand the functions and make the most of the scanner’s capabilities. After reading the manuals, store them in a safe place for future reference. • If you are using Windows, the User Manual (electronic manual) will be registered to the following location when the software is installed.
Hint Symbols Used in This Manual In Windows 8.1, it is registered at the following location. The following symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions that should be observed for safety. WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the scanner safely, always pay attention to these warnings.
Table of Contents Introduction ......................................................................... 5 Maintenance .............................................. 53 Symbols Used in This Manual...................................................... 6 Daily Maintenance ........................................................ 53 Before Using the Scanner............................ 8 Cleaning the Scanner............................................................ 53 Cleaning the Inside of the Scanner ..
Before Using the Scanner System Requirements of Software To use the scanner, your computer must satisfy the following system requirements. IMPORTANT • Use the USB interface provided as standard with your computer. However, normal operation is not guaranteed with all USB interfaces, even if present as standard equipment on the computer. For details, consult your local authorized Canon dealer. • Scanning speeds are lower if your computer’s standard USB interface is USB Full-Speed (equal to USB 1.1.
Turning the Power ON The power of the scanner can be turned ON and OFF with the power button on the front of the scanner. 1 2 Make sure that the scanner and computer are connected properly. Press the power button. When the scanner is properly connected to the computer, the (CaptureOnTouch) icon appears on the taskbar as follows. Power button If the taskbar icon appears as , the scanner is not properly connected to the computer. Check the status of the power switch and USB cable.
Important Safety Instructions ● Avoid exposing the scanner to rapid changes in temperature. If the room in which the scanner is installed is cold but rapidly heated, water droplets (condensation) may form inside the scanner. This may result in a noticeable degradation in scanning quality. The following conditions are recommended for optimal scanning quality: Room temperature: 10 °C to 32.5 °C (50 °F to 90.
● The supplied power cord set is intended for use with this scanner only. Do not use it with other electronic equipment. In addition, do not use power cord sets other than the one supplied with the scanner. Doing so may result in fire or electric shock. ● Do not take the scanner apart or modify it. ● Never try to take the AC adapter apart or modify it in any way, as this is dangerous. ● Do not use flammable spray near the scanner.
● Do not place objects on top of the scanner. Such objects may tip or fall over, resulting in personal injury. ● Connect only to a power outlet of the rated voltage and power supply frequency (120 V, 60 Hz or 220-240 V, 50/60 Hz depending on your region). Doing so might cause a fire or electric shock. ● When unplugging the power cord, grasp it firmly by its plug. Do not pull directly on the power cord, as this may damage or expose the cord’s internal wiring, resulting in a fire or electric shock.
Features of the Scanner ● Auto Resolution Detection When enabled in the CaptureOnTouch or scanner driver settings, this function detects the content of documents and determines the scanning resolution automatically. ● Deskew The scanner is equipped with a deskew function that straightens images before saving them when documents are scanned askew. The scanned images are straightened, as opposed to the actual document sheets.
● Character/Line Emphasis Function If characters and lines in scanned images are not clearly visible, you can use this function to adjust their thickness during scanning. ● Start Scanning from the Operating Panel You can start scanning by launching CaptureOnTouch with the operating panel buttons. By default, two One Touch buttons are assigned to Job Nos. 1 and 2, which allows you to easily scan a document by just following the instructions on the screen.
Names and Functions of Parts Front View (With the Eject Tray Pushed In) A OPEN Lever D Document Guides Pull this toward you to open the front unit. Align the document guides with both edges of the document to ensure that the document feeds straightly. B Power button Press this to turn on the scanner. When pressed, the power indicator is lit. Press this button again to turn off the power. The power button lights or flashes as follows depending on the scanner status.
Front View (With the Eject Tray Pulled Out) A Feed Extension Support E Document Eject Tray Open this when placing long paper in the scanner. Pull this out to scan documents. Scanned documents are output here. When scanning multiple documents of varying sizes at one time, pulling out and lifting up this tray locks the angle of the tray, so the documents ejected onto the tray are aligned. B Feed Support Pull this out to support loaded documents.
C Start Button Back View This executes the job displayed in the Job No. Indicator. D Stop Button This stops active jobs. E DFR (Double Feed Release) Button This is lit when a document double feed is detected. Pressing this button cancels the double feed detection function, allowing you to continue scanning. Displayed Error Codes When a scanning error occurs, the following error codes are displayed in the Job No. Indicator. : displayed when the front unit is open.
Basic Operation Documents The scanner can scan documents ranging in size from business cards to LTR/A4. The document sizes that this scanner can scan are shown below. Align the centers Plain Paper Size Width: 50.8 mm to 216 mm (2" to 8.5") Length: 54 mm to 356 mm (2.1" to 14") (You can scan documents up to 3,000 mm (118.1") long by setting the scanner to the Long Document mode.) Paper thickness 27 to 209 g/m2 (7 to 56 lb bond) 0.04 mm to 0.25 mm (0.00157" to 0.
• Scanning the following types of documents can cause a paper jam or malfunction. To scan such a document, make a photocopy of the document and then scan the photocopy. There are creases or fold lines. Carbon paper There are curls. The surface is coated. There are tears. Extremely thin document such as semi-transparent thin paper. There are clips or staples. Documents with excessive paper dust particles. Business Card Size: 50 mm x 85 mm (1.97" x 3.
How to Place Documents IMPORTANT Scanning multiple documents Pull the document eject tray forward according to the various lengths. Standard paper feeding should be used when scanning multiple documents of a standard size at one time. Standard paper feeding enables multiple documents to be fed while separating each page. 1 2 Pull out the feed support. Open the feed extension support when placing long documents. Pull out the document eject tray. The document eject tray can be adjusted to 3 lengths.
4 • If double-feeding occurs, press the scanner's DFR button to continue the scan, or clear the [Detect by Ultrasonic] check box in the [Feeding] tab on the scanner driver settings screen. (See p. 26) Place the document. Placing Cards When scanning cards, place one card at a time horizontally. 1 2 Adjust the document guides to fit the width of the card to be scanned. Place the card horizontally, with the reverse side facing you, and the top of the card facing down.
3 Load the document with the sealed end of the carrier sheet as the leading edge. • When scanning cards, clear the [Detect by Ultrasonic] check box in the [Feeding] tab on the scanner driver settings screen. (See p. 26) After placing the document, align the document guides with both edges of the document. Scanning with Carrier Sheets To prevent damage to a document while scanning it, insert it into an optional carrier sheet before loading it in the scanner.
• When using carrier sheet for legal sized document, the scanner must be set to long document mode. (See p. 23) 1 3 Select the [Carrier sheet] check box. 4 Click Open the scanner driver's Detail Settings screen. (See p. 30) 2 Open the [Feeding] tab, and set [Carrier sheet] to [Carrier sheet]. to close the dialog box. Setting the Long Document Mode The length of documents that can be scanned with the scanner is normally 356 mm (14"), but you can scan documents up to 3,000 mm (118.
• When scanning large-sized documents with the Long Document mode, scanning may be slower. Errors also occur due to memory shortage, and scanning may be disabled. IMPORTANT Log on to Windows as an Administrator. 1 Click the Start button, and then click [Canon R40], and [Canon imageFORMULA Driver Setting Tool]. imageFORMULA Driver Setting Tool starts. 2 3 Hint In Windows 8.1, it is registered at the following location. 24 Click the [Control] tab. Click the [Setting] button of [Hardware].
4 Select [Long Document mode (1000 mm)] or [Long Document mode (3000 mm)] depending on the length of the document. 1 Open the scanner driver's Detail Settings screen. (See p. 32) 2 Click to display the [Scanner Information] dialog box. The [Scanner Information] dialog box appears. 3 Click [Maintenance]. The [Maintenance] dialog box appears. 4 5 6 Click [OK]. Select [Long Document mode (1,000 mm)] or [Long Document mode (3,000 mm)] depending on the length of the document.
3 Detecting a document double feed This scanner includes a function to detect document double feeds. By using this function, the scanner will automatically stop when it detects that multiple documents have been fed at the same time. You can also specify whether to save the scanned image after scanning has finished and continue scanning the document (double feed detection ignore function).
1 2 3 What to do when a double feed is detected Open the scanner driver's Detail Settings screen. (See p. 32) When not using the double feed detection ignore function If a document double feed is detected during scanning, document feeding stops when the double fed documents are ejected. When this happens, the following error code is displayed in the Job No. Indicator of the operating panel.
When using the double feed detection ignore function If a document double feed is detected during scanning, document feeding stops when the double fed documents are ejected. The following error code is displayed in the Job No. Indicator of the operating panel, and the DFR button lights. Double feed detection error code Also, the [Rapid Recovery System] screen appears to enable you to specify whether to continue scanning.
Scanning methods Scanning with CaptureOnTouch What is CaptureOnTouch? CaptureOnTouch is a scanning application that enables you to scan a document with a simple operation merely by selecting the screen panel. For details about the operations and functions, see the help of CaptureOnTouch.
Setting the Scanner Driver [Basic] tab When you scan a document in a TWAIN compatible application, open the scanner driver and configure the scanning conditions and other settings. This section describes the configuration and functions of the scanner driver. Configuration and Functions of the Scanner Driver The scanner driver consists of the following tabs. Configure basic scanning conditions such as the mode, page size, resolution, and scanning side.
[Image processing] tab [Others] tab Set the processing method for scanned images. Configure special scan method and image processing settings. [Feeding] tab Specify scanner operations related to document feeding.
Simple Mode When the scanner driver is opened from CaptureOnTouch, the following settings screen of the scanner driver appears. Hint When the Advanced Settings screen is called from some applications, the Advanced Settings screen may have the Simple mode and Advanced mode.
Color mode Setting Basic Scanning Conditions Select the scanning mode. This section provides an overview of the basic setting items that are the minimum requirements when configuring the scanner settings. • [Advanced Text Enhancement] and [Advanced Text Enhancement II] remove or process the background color and background surrounding text to enhance the text for easy reading.
Dots per inch Select the scanning resolution. Confirming Basic Conditions for Scanning When you scan a document, make sure you confirm the [Color mode], [Dots per inch], [Page Size], and [Scanning Side] basic conditions in the settings screen of the scanner driver. • Higher resolutions provide clearer images but result in larger file sizes and slower scanning. • When [Detect automatically] is specified, the resolution is detected automatically from the content printed in the document.
Color mode Page Size Select the scanning mode. Select the page size that matches the document to be scanned. • [Advanced Text Enhancement II] removes or processes the background color and background surrounding text to enhance the text for easy reading. • [Detect automatically] detects whether a document is color, grayscale, or black and white based on its content. When this is selected, you can configure detailed settings for the detection method. Refer to the Help for details.
Scanning Documents of Unregistered Page Sizes Specifying the Scan Area Configure the following settings when you want to specify the area of the document to be scanned. Specifying an area You can register a non-standard page size that has not been registered as a page size by naming and registering it as a custom page size in the Custom Paper Size dialog box, which is opened from the [Save] button on the [Basic] tab.
Configuring Scanner Settings According to Purpose Set the scanning side setting to [Skip blank page] to delete the images of the blank pages in the document. Set the scanning conditions according to the scanning purpose. When you want to delete the images of the blank pages in two-sided documents Set the scanning side setting to [Skip Blank Page] on the [Basic] tab to delete the images of the blank pages in the document.
When you do not want to scan colored lines and text When you want to enhance red Specify the color (red, green, blue, all colors) to be ignored (dropped out) in the color drop-out settings on the [Image processing] tab, and that color will be removed from the scanned image. Specify [Red Enhance] in the color dropout settings on the [Image processing] tab, and red will be enhanced in the scanned image. Click [Image processing], and when a dialog box opens, specify [Red Enhance] for [Color drop-out].
When you want to enhance contours in images When you want to make lines and text in scanned images thicker or thinner Adjust the edge emphasis setting on the [Image processing] tab. Drag the [Character Emphasis] slider in the [Image processing] tab to make lines and text in the scanned images thicker or thinner. Click [Image processing] and adjust the edge emphasis settings in the dialog box which appears.
When you want to enhance text that is difficult to read because of factors such as the background of the scanned document Select [Advanced Text Enhancement II] in the [Color mode] setting. The background behind the text is removed or processed so that the text is emphasized for better readability. Select [Advanced Text Enhancement] or [Advanced Text Enhancement II] in the mode setting on the [Basic] tab.
When you want to match the orientation of images to the text when scanning a mixture of pages with different text orientations Select [Text orientation recognition] in [Document Orientation] on the [Others] tab. The text orientation on each page is detected, and the scanned image is rotated in 90-degree increments to correct the orientation. Select the [Double Feed Detection] check box.
When you want to rotate the images of a document placed horizontally to correct the orientation Select the [Text Orientation Recognition] check box. The text orientation on each page is detected, and the scanned image is rotated in 90-degree increments to correct the orientation. Specify the rotation angle in [Document Orientation] on the [Others] tab. Click [Image processing] and specify the rotation angle in [Document Orientation] in the dialog box that appears.
When you want to use batch separation for scanning When you want to use multistream settings for scanning When you want to divide and scan a document, you can separate a batch at the timing with which each next document is placed and scanned. (Only enabled for applications that support batch separation.) In this case, set the scanner driver as follows. • Set [Feeding Option] on the [Feeding] tab to [Panel-Feeding] or [Automatic Feeding].
A When you want to specify different scanning conditions for the front and back pages of a document, select [Both] for [Scanning Side] on the [Basic] tab in advance. B Specify the number of scanning conditions to apply in [Stream count of Front]. Up to three can be specified. C Select [Front 1st], and then open the other tabs and set the scanning conditions. Depending on the value specified for [Stream count of Front], configure the remaining [Front 2nd] and [Front 3rd] in the same way.
When you want to save a scanner driver setting Click [Image processing] and select [ON] for [Erase Dot] or [Erase Notch] in the dialog box that appears. When you finish configuring a setting, click the [Save] button of [User Preference] to save the setting. The saved setting is registered to the list. You can delete a setting from the list with the [Delete] button, and save or load a configuration file with the [Back Up] or [Restore] button.
Clicking the [Add] button registers the current setting to [Favorite Setting List]. Use the [Delete] button to delete a setting from the list.
Function Restrictions Depending on Color Mode Setting Some of the setting items in each of the driver tabs are disabled as follows depending on the setting for [Color Mode] on the [Basic] tab.
2)Not available for setting if either one of the following two conditions are met. • [Detection mode] in the [Auto Image Type Detection Settings] dialog box is set to [Color or Gray] • [Mode in case of binary] in the [Settings for in case of binary] tab is set to [Error Diffusion] 3)Not available for setting if [Detection mode] is set to [Color or Gray] in the [Auto Image Type Detection Settings] dialog box.
Advanced mode (Image processing dialog) Setting value Edge emphasis Background Character smoothing Emphasis Prevent Bleed Through / Remove Background Color drop-out Erase Dot Erase Notch 1)1) Detect automatically Black and White Error Diffusion Advanced Text Enhancement II 256-level Gray 24-bit Color : Available for setting 1) Cannot be set if the [Detect automatically] setting matches the conditions below • [Detectio
More Advanced Scanning Methods (Batch Separation) Batch separation using patch code sheets Batch Separation (Insert blank page) This scanner supports batch separation (automatic file separation) functions by using patchcodes. By tucking patchcode sheets supplied with this scanner into a document and scanning it, the scanner can automatically separate files by images of documents containing patchcode sheets (or documents after the patchcode sheet).
1 Hint Print patchcode with a printer. In Windows 8.1, it is registered at the following location. Click [Start] – [Canon R40] and then select [Patchcode] from the menu. Patchcodes can be printed in A4 and letter (LTR) sizes. Open the application and print a patchcode that is the same size as the document to be scanned. IMPORTANT • Patchcodes must be printed in their normal size. If patchcodes are enlarged or reduced, they may not be recognized correctly.
2 Place the documents in the scanner after inserting the patchcode sheet in front of the page that separates the files. Insert the patchcode sheets at the beginning of documents to change file separation. 3 In an application, open the scanner driver settings screen and select [Patchcode] in [Batch Separation] on the [Others] tab.
Maintenance Daily Maintenance Clean the scanner on a regular basis, as described below, to maintain peak scanning quality. Cleaning the Inside of the Scanner Dust or paper particles inside the scanner may cause lines or smudges to appear on scanned images. Use compressed air to periodically clean dust and paper particles from the document feed opening and the inside of the scanner.
3 Wipe any dirt off the scanning glass. Wipe any dirt off the scanning glass with a cloth that has been dampened with water and thoroughly wrung out, and then wipe the glass dry with a clean, dry and soft cloth. Anti-Static brush 4 Clean the rollers. Clean the rollers while turning them. Wipe the rollers with a cloth that has been dampened with water and thoroughly wrung out, and then use a clean, dry and soft cloth to wipe away any moisture.
5 8 Remove the retard roller and feed roller. (See p. 58, p. 59) IMPORTANT Remove the retard roller and feed roller from the scanner to clean them, and be sure to reattach them to the scanner when cleaning is finished. 6 Close the front unit by gently pushing it up on both sides until it clicks into place. Make sure that the front unit is completely closed by pushing until you hear a click. Wipe the removed rollers with a cloth that has been dampened with water and thoroughly wrung out.
3 4 Hint In Windows 8.1, it is registered at the following location. 1 2 2 Click the [Maintenance] tab and then move the slider to change the value of [Reduction ratio adjustment]. The adjustment value can be set within the range from -3.0% to 3.0%. 56 Click [Apply]. Click [Close] to close the imageFORMULA Driver Setting Tool. Open the scanner driver's Detail Settings screen. (See p. 32) Click to display the [Scanner Information] dialog box.
3 4 Replacing Consumable Parts Click [Maintenance] to display the [Maintenance] dialog box. The two rollers (feed roller and retard roller) installed in the scanner are consumable parts. The feed roller and retard roller wear with scanning. If the feed roller and retard roller are worn, documents may not feed correctly and paper jams and double feeds may occur.
Opening and Closing the Front Unit 1 2 Pull the OPEN lever and pull open the front unit toward you. When closing the front unit, make sure that it is completely closed by gently pressing the left and right until you hear a click. Replacing the Feed Roller Hint 1 The location of each of the consumable parts is shown below. Feed Roller Retard roller (inside the front unit) 58 Open the roller cover.
2 Replacing the Retard Roller Remove the feed roller. 1 3 Install the new feed roller. 2 4 Open the roller cover. Pull the left lever that secures the retard roller to the scanner, and remove the roller. Close the roller cover.
3 Resetting the counter Install the new retard roller by inserting the right side first. IMPORTANT Log on to Windows as an Administrator. 1 Click the Start button, and then click [Canon R40], and [Canon imageFORMULA Driver Setting Tool]. imageFORMULA Driver Setting Tool starts. 4 5 Push the left side of the retard roller to secure it to the scanner. Close the roller cover. Hint In Windows 8.1, it is registered at the following location.
1 2 2 Opens the scanner driver's Detail Settings screen. (See p. 32) Click to display the [Scanner Information] dialog box. Click the [Maintenance] tab and then select [Reset]. 3 Click [Maintenance] to display the [Maintenance] dialog box. 4 Click [Reset]. 5 Click The counter resets. 3 Click [Close] to close the imageFORMULA Driver Setting Tool. 61 to close the dialog box.
Auto Power Off Setting The scanner automatically turns off if 4 hours elapse without scanning or another operation being performed. To disable this setting, follow the procedure below. IMPORTANT Log on to Windows as an Administrator. 1 Click the Start button, and then click [Canon R40], and [Canon imageFORMULA Driver Setting Tool]. 2 3 imageFORMULA Driver Setting Tool starts. Hint 4 In Windows 8.1, it is registered at the following location. 62 Click the [Control] tab.
About the Canon imageFORMULA Driver Setting Tool What is Canon imageFORMULA Driver Setting Tool? The Canon imageFORMULA Driver Setting Tool can be used to check the information of the scanner, or to configure the maintenance settings. Canon imageFORMULA Driver Setting Tool consists of the following tabs. 5 6 Click [OK]. [Information] tab You can check the firmware’s version information and scanner information. Click [Close] to close the imageFORMULA Driver Setting Tool.
Troubleshooting Common Problems and Solutions This section provides recommended solutions to common problems. If you have a problem that is not solved by the following, contact your local authorized Canon dealer. Problem 1 The scanner will not turn on. Solutions Confirm that the AC adapter is plugged firmly into a power outlet. Problem 2 The scanner is not recognized. Solutions (1) Confirm that the scanner is properly connected to the computer with a USB cable.
Problem 6 Pages are missing. Solutions When the scanner driver’s [Scanning Side] setting is [Skip Blank Page], documents with very little black may be unintentionally skipped. Decrease the Set the likelihood of skipping blank page value ("When you want to delete the images of the blank pages in twosided documents" on p. 37) or set the [Scanning Side] to another mode, such as simplex or duplex. If pages are skipped due to the document double feeding, see "Problem 7 Documents jam (or doublefeed).
Problem 12 The size detection and deskew functions fail. Solutions When [Carrier sheet] is set to [Carrier sheet] in the [Feeding] tab of the scanner driver settings screen and you scan a document with black edges without inserting it in a carrier sheet, the size detection and deskew functions may fail. In such cases, disable the size detection and deskew functions, or set [Carrier sheet] to [None] in the [Feeding] tab.
Software Troubleshooting This section describes troubleshooting problems and solutions for operating the supplied software (CaptureOnTouch). If scanning is too slow (1) Close other running programs, if any. (2) Scanning can be slowed down by memory shortage caused by memory-resident applications such as anti-virus programs. Close such memory-resident programs if necessary to free up memory space.
Useful tips Here are some useful tips for scanning documents. Where are scanned images saved? Can the save destination be changed? All destination locations can be changed to other folders. Both Standard Scanning and One Touch Scan save the output to the destination set in the [Select output] panel. How are the scan settings configured? By clicking the Edit button ([ ]) in the [Select document] panel, you can edit the scan settings when the [Select document edit screen] opens.
• To use this function, you need to install a plug-in. • The plug-in can be installed by selecting its checkbox when installing CaptureOnTouch.
Clearing a Paper Jam When paper jams are detected during scanning, the following error codes are displayed in the scanner’s display panel and scanning is interrupted. 2 Pull the OPEN lever and pull open the front unit toward you. Paper jam error code When a paper jam or double feed occurs during scanning, use the following procedures to clear them. CAUTION Be careful when removing jammed paper. take care not to cut your hand on the edges of the paper.
IMPORTANT Make sure to pull the document out carefully, without applying too much force. If the jammed paper tears while you are pulling it out, make sure to remove any remaining pieces from inside the scanner. 4 Close the front unit by gently pushing it up on both sides until it clicks into place. Make sure that the front unit is completely closed by pushing until you hear a click. After removing the jammed paper, check to see if the last page was scanned correctly, and then continue scanning.
Uninstalling the Software If the TWAIN driver or CaptureOnTouch is not operating normally, follow the procedure below to uninstall them. Then, re-install the software. See Setup Guide. IMPORTANT Log on to Windows as an Administrator. 1 2 From the Windows task bar, click the [Start] button and then [Control Panel]. Click [Uninstall a program]. The [Uninstall or change a program] dialog box appears. 3 From the Programs list, select the software you want to remove and then click [Remove].
Appendix Specifications Main Unit Scanning Speed (Conditions: Core i7 3.4GHz CPU, 16 GB memory, A4 document size) Grayscale Simplex 200dpi 40 pages/min 300dpi 40 pages/min Duplex 200dpi 80 images/min 300dpi 80 images/min 24-bit Color Simplex 200dpi 30 pages/min 300dpi 20 pages/min Duplex 200dpi 60 images/min 300dpi 40 images/min Type Desktop sheetfed scanner Scanning Document Size Plain Paper Size: Width: 50.8mm to 216 mm (2" to 8.5") Length: 54 mm to 356 mm (2.
AC Adapter (100 to 240 V type) Model Number Input Output Weight Dimensions MG1-5039 (24V) AC100 to 240V, 50/60 Hz, 1.06 to 0.6 A DC24V 2.0A Approximately 0.3kg (0.66 lb) Specifications are subject to change without notice due to product improvements. Replacement parts 245 mm (9.65") Exchange roller kit (product code: 0697C003) Kit to replace the rollers (feed roller, retard roller). • For the replacement procedure, see “Replacing Consumable Parts” on p. 57.
Index A P Adjusting the Reduction Ratio .................................................... 55 Advanced Mode(Mac) ................................................................ 32 Auto Power Off ........................................................................... 62 B Paper jam ................................................................................... 71 Power supply ................................................................................ 9 R Reduction ratio adjustment .......
CANON ELECTRONICS INC. 3-5-10 SHIBAKOEN, MINATO-KU, TOKYO 105-0011, JAPAN CANON U.S.A. INC. ONE CANON PARK, MELVILLE, NY 11747, U.S.A. CANON CANADA INC. 8000 Mississauga Road Brampton, Ontario L6Y 5Z7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59, 1185 XB AMSTELVEEN, THE NETHERLANDS CANON AUSTRALIA PTY. LTD. BUILDING A, THE PARK ESTATE, 5 TALAVERA ROAD, MACQUARIE PARK, NSW 2113, AUSTRALIA CANON SINGAPORE PTE. LTD. 1 FUSIONOPOLIS PLACE, #15-10, GALAXIS, SINGAPORE 138522 CANON KOREA BUSINESS SOLUTIONS INC.