Instructions ENG
Thank you for purchasing a Canon product. Canon RF15-35mm F2.8 L IS USM is a ultrawide zoom lens for use with EOS R series cameras. zz“IS” stands for Image Stabilizer. zz“USM” stands for Ultrasonic Motor. Camera Firmware Please use the latest version of firmware with the camera in use. For details on whether the firmware is the latest version or not, and for details on updating the firmware, please check the Canon website.
Safety Precautions Precautions to ensure that the camera is used safely. Read these precautions thoroughly. Make sure all details are observed in order to prevent risks and injury to the user and other people. Warning Details pertaining to risks that may result in death or serious injury. zz Do not look directly at the sun or other strong light sources through a lens. This may result in loss of sight. zz Do not leave a lens in the sun without the lens cap attached.
General Precautions Handling Precautions zz Do not leave the product in excessive heat such as in a car in direct sunlight. High temperatures can cause the product to malfunction. zz If the lens is taken from a cold environment into a warm one, condensation may develop on the lens surface and internal parts. To prevent condensation in this case, first put the lens into an airtight plastic bag before taking it from a cold to warm environment. Then take out the lens after it has warmed gradually.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment.
Nomenclature Zoom ring (→ 7) Zoom position index (→ 7) Focus mode switch (→ 7) Hood mount (→ 11) Rubber ring (→ 6) Filter mounting thread (→ 12) Control ring (→ 8) Focusing ring (→ 7) Image stabilizer switch (→ 9) Lens mount index (→ 6) Contacts (→ 6) Lens mount (→ 6) zz For detailed information, reference page numbers are provided in parentheses (→ **).
1. Attaching and Detaching the Lens Lens mount index Lens release button Dust cap Attaching the Lens Align the lens mount indexes of the lens and camera, and turn the lens clockwise until you hear a click. Detaching the Lens Turn the lens counterclockwise while pressing the camera’s lens release button. Detach the lens once it has stopped turning. Please refer to the camera's instructions for details. zzSet the camera’s power switch to OFF when attaching or detaching the lens.
2. Setting the Focus Mode 3. Zooming Focus mode switch To zoom, turn the Lens’ zoom ring. Focusing ring To shoot in autofocus (AF) mode, set the focus mode switch to AF. To use only manual focusing (MF), set the focus mode switch to MF, and focus by turning the focusing ring. zzBe sure to finish zooming before focusing. Zooming after focusing can affect the focus. zzBlurring may temporarily occur if the zoom ring is quickly turned. zzQuickly turning the focusing ring may result in delayed focus.
4. Control Ring The control ring can be assigned the functions that are commonly used with cameras, such as shutter speed and aperture settings. Control ring The click action of the control ring allows you to have a sense of how much it is being turned. Please refer to the camera's instructions for details on how to use the control ring. zzThere are cases in which the sound of control ring operations may be recorded when shooting movies.
5. Image Stabilizer This function provides image stabilization appropriate for shooting conditions (such as shooting still subjects and panning shots). Set the image stabilizer switch to ON when you want to use the Image Stabilizer. zz Set the image stabilizer switch to OFF when you are not going to use the Image Stabilizer. zzThe Image Stabilizer cannot compensate for a blurred shot caused by a subject that moved.
Image Stabilizer The Image Stabilizer for this lens is suited to hand-held shots in the following conditions. zz In semi-darkened areas such as indoors or outdoors at night. zz In locations where the flash cannot be used, such as art museums and theater stages. zz In situations where your footing is uncertain. zz In situations where fast shutter speed settings cannot be used. zz Panning shots of vehicles, trains, etc.
6. Hood The custom lens hood cuts out unwanted light and protects the front of the lens from rain, snow, and dust. Attachment position mark Red dot Button Red dot Attachment position mark Red dot Stop position mark Attaching the Hood Align the red attachment position mark on the hood with the red dot on the front of the lens, and then turn the hood in the direction of the arrow until you hear a click.
7. Filters (Sold separately) You can attach filters to the filter mounting thread on the front of the lens. zzOnly one filter may be attached. zzIf you need a polarizing filter, use the Canon Circular Polarizing Filter PL-C B. zzDetach the hood when adjusting the polarizing filter.
Specifications Focal Length/Aperture Lens Construction Minimum Aperture Angle of View Min. Focusing Distance Max. Magnification 15-35mm f/2.8 12 groups, 16 elements f/22 Horizontal: 100° 25’- 54°, Vertical: 77° 20’- 38°, Diagonal: 110° 30’- 63° 0.28 m/0.92 ft. 0.21x (at 35 mm) Approx. 362 x 235 - 164 x 110 mm/14.25 x 9.25 - 6.46 x 4.33 in. Field of View (at 0.28 m/0.92 ft.) Filter Diameter 82 mm Max. Diameter and Length Approx. 88.5 x 126.8 mm/3.48 x 4.99 in. Weight Approx. 840 g/29.6 oz.
CT1-D107-B 0619Ni © CANON INC.
111111111111111 IIIIIIIIIII IIIII Ill CT1B071A CT1-B071-A © CANON INC. 2018 PRINTED IN JAPAN Canon Canon Interchangeable Lens Instructions These instructions describe important safety notes for Canon interchangeable lenses• and basic instructions on how to handle those lenses. For more detailed information, refer to the instructions for each lens. Instructions for your lens can be downloaded from the Canon website below: *EF (EF-S) lenses, EF-M lenses, RF lenses http://www.canon.
Using the Image Stabilizer • To use image stabilization, set the Image Stabilizer to ON. The Image Stabilizer settings are explained below. □ EF (EF-S) lenses and RF lenses: Use the Image Stabilizer switch on the lens (ON/OFF). □ EF-M lenses: Select the setting on the camera ([ON/OFF]). Attaching a Lens Hood Align the hood with the edge of the lens and turn the hood clockwise to attach it. Using the Control Ring This only applies to RF lenses equipped with a control ring.
RF 15-35mm F2.8 L IS USM Specifications Lens Focal Length & Maximum Aperture 15-35mm f/2.8 Minimum Focusing Distance 0.92 ft./0.28 m Maximum Magnification 0.21x (at 35mm) Lens Construction 16 elements in 12 groups Special Elements 3 Aspherical lenses, 2 UD lenses Filter Size Diameter Ø82 mm Aperture Blades 9 (circular) IS (CIPA Standard Correction Effect) 5 stops (When using the EOS R camera with a 35mm focal length.) Focus Drive System Nano USM Minimum Overall Length Approx. 4.99 in.
Ca11on CANON®EF Lens and Accessories Limited WarrantyFor U.S.A. & Canada Only The limited warranty set forth below is g iven by Canon U.S .A ., Inc. (Canon U.S.A .) in the United States or Canon Canada, Inc. (Canon Canada) in Canada with respect to the Canon brand EF Lens, as well as with respect to the accessories packaged with this limited warranty (collectively the "Products"), when purchased and used In the United States or Canada.
Register Now! ., Visit www.registercanon.com to register your new EF & EF-S Lenses today and receive the following: • • • • I Telephone support* E-mail support* Product protection* Receive information on new products and promotions* There is no charge to register or for the benefits offered. • These benefits valid in the U.S. only. Please read the Terms and Conditions at www.registercanon.com for complete details. For accessories and other supplies visit www.estore.usa.canon.
I Dealer Reco.r d of Canon Purchase Fiche d' Achat our Con'c essionnaire Canon C anOfl - - 11 11 Complete this card at time of sale.
' Canon cANoN L1M1rEci wARRANrv CANON U.S.A., INC. CANON CANADA INC. NAME NOM ADDRESS ADRESSE CITY VILLE POSTAL CODE CODE POSTAL PROVINCE THESE ARE NOT REGISTRATION CARDS - Retain for your Records CES CARTES NE SONT PAS GELLES POUR L.:ENREGISTREMENT. - Les conserver comme reference. DEALER'S NAME & ADDRESS MARCHAND NOM & ADRESSE MODEL MODELE RF1 5-35/ 2.8 LIS USM BODY NO. BOITIER NO 7900000386 ' PURCHASE DATE DATE D'ACHAT CT1-B017-A 0719Ni40.
Canon U.S.A. You may obtain technical support for your Products as follows: • Internet support at www.usa.canon.com/support (E-mail support also available) • Telephone assistance from a Canon U.S.A. Customer Care representative free of charge during regular business hours at 1-800-OK-CANON (1-800-652-2666). Canon Canada You may obtain technical support tor your Products as follows: • Internet support for English at www.canon.
des objectifs EF et des accessoires de CANON®Cauo11 Garantie limitee Pour les Etats-Unis et le Canada seulement La presente garantie limitee est fournie par Canon U.S.A., Inc. (Canon U.S.A.) aux Etats-Unis ou Canon Canada, Inc. (Canon Canada) au Canada a l'egard des objectifs EF de marque Canon, des accessoires livres avec cette garantie limitee (collectivement les M produits •), lorsqu'ils sont achetes et utilises aux Etats-Unrs ou au Canada.