PUB.
COPYRIGHT WARNING Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws. 2 Trademark Acknowledgements • • • • • • • • SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. macOS is a trademark of Apple Inc., registered in the U.S. and other countries.
Highlights of the Camcorder The Canon VIXIA HF G50 4K Camcorder is a high-performance camcorder whose compact size makes it ideal in a variety of situations. The following are just some of the many functions featured in the camcorder. 4K Recording Convenience and Functionality CMOS sensor and DIGIC DV 6 image processor Recording for extended periods The camcorder is equipped with a 1/2.3-inch CMOS sensor that captures video at an effective pixel count of approximately 8.29 megapixels (3840x2160).
Creativity and Artistic Expression Other Features Special recording modes (A 36, 75) When you make recordings, you can change the recording frame rate to achieve a fast or slow motion effect. Alternatively, you can use pre-recording to record 3 seconds before you decide to start recording, helping you capture those hard-to-catch opportunities. • Battery packs compatible with Intelligent System give you an estimate (in minutes) of the remaining recording time.
Table of contents 1 Introduction 7 About this Manual 7 Conventions Used in this Manual 7 Supplied Accessories 9 Names of Parts 10 2 Preparations 14 Attaching the Ferrite Core 14 Charging the Battery Pack 14 Preparing the Camcorder 17 Using the Lens Hood 17 Adjusting the LCD Screen 18 Using the Viewfinder 19 Grip Belt and Straps 19 Basic Operation of the Camcorder 21 Turning the Camcorder On and Off 21 Setting the Camera Mode 22 Using the MENU Button and Joystick 22 First Time Settings 23 Setting the Date
Audio Equalizer (Built-in Microphone) 71 Audio Limiter 71 Audio Compressor 72 Using Headphones 73 Color Bars/Audio Reference Signal 74 Recording Color Bars 74 Recording an Audio Reference Signal 74 Pre-Recording 75 Onscreen Displays 76 Using the Optional RC-V100 Remote Controller 77 Using the GP-E2 GPS Receiver 78 Connecting the GPS Receiver 78 4 Customization 80 CUSTOM Dial and Button 80 Assignable Buttons 81 Saving and Loading Menu Settings 83 Saving Camcorder Settings 83 Loading Camcorder Settings 83
1 Introduction About this Manual Introduction About this Manual Thank you for purchasing the Canon VIXIA HF G50. Please read this manual carefully before you use the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting (A 109). Conventions Used in this Manual • IMPORTANT: Precautions related to the camcorder’s operation. • NOTES: Additional topics that complement the basic operating procedures.
About this Manual These icons indicate the camcorder’s operating mode and whether a function is available in that mode. 8 : Indicates whether the camcorder is in shooting (CAMERA) or playback (MEDIA) mode. In this example, the function is available only in mode. For details, refer to Turning the Camcorder On and Off (A 21). Brackets [ ] are used to refer to onscreen buttons and menu options you will select and to other onscreen messages and displays. : Indicates the camera mode.
Supplied Accessories Supplied Accessories The following accessories are supplied with the camcorder: 9 CA-570 Compact Power Adapter (incl.
Names of Parts Names of Parts Left side view 10 2 3 1 4 5 1 2 3 4 5 6 7 6 7 8 Lens barrier switch (A 32) SD card slot 2 (A 28) SD card slot 3 (A 28) u (review recording) button (A 34)/ Assignable button 5 (A 81) Lens hood (A 17) Focus/Zoom ring (A 50, 54) CUSTOM (customizable) dial (A 80) 9 8 10 CUSTOM (customizable) button (A 80) 9 SD card compartment cover 10 DISP (onscreen display) button (A 76)/BATT.
Names of Parts Right side view 1 11 7 8 5 2 6 3 4 1 2 3 4 Built-in speaker (A 87) MIC terminal (A 66) HDMI OUT terminal (A 92, 92) REMOTE terminal (A 77) For connecting commercially available remote controllers.
Names of Parts Front view 12 1 6 Back view 4 5 7 8 9 2 3 10 11 12 13 14 15 1 2 3 4 5 6 Instant AF sensor (A 57, 119) AF/MF button (A 54)/ Assignable button 1 (A 81) PRE REC (pre-recording) button (A 75)/ Assignable button 2 (A 81) LCD touch screen (A 18) Focus/Zoom ring switch (A 50, 54) Viewfinder (A 19) 7 8 9 10 11 12 13 14 15 Dioptric adjustment lever (A 19) Joystick/SET button (A 22) Strap mount (A 19) Assignable button 3 (A 81) Assignable button 4 (A 81) Battery attachment unit (A 14) STA
Names of Parts Top view Bottom view 3 13 9 4 5 1 6 2 7 10 11 8 1 2 3 4 5 6 7 Power switch (A 21) POWER / CHG (battery charging) indicator (A 14) Built-in stereo microphone (A 66) Accessory shoe Camera mode switch (A 22) Grip zoom rocker (A 51) ACCESS indicator (A 32) 12 8 Mini advanced shoe (A 65) 9 Lens hood mount index mark 10 Tripod socket For mounting the camcorder on a tripod with a mounting screw 6.5 mm (0.26 in.) or shorter.
Attaching the Ferrite Core 2 Preparations Preparations Attaching the Ferrite Core 14 Attach the enclosed ferrite core before you connect the compact power adapter to the camcorder. Attaching the ferrite core to the compact power adapter cable is necessary to suppress RF interference. Attach the ferrite core to the cable about 6 cm (2.4 in.) from the DC plug (the plug to be connected to the DC IN terminal).
Charging the Battery Pack 3 Charging will start when the camcorder is turned off. POWER/CHG (battery charging) indicator • If the camcorder was on, the green POWER/CHG indicator will go out when you turn off the camcorder. After a moment, the POWER/CHG indicator will turn on in red (battery pack charging). The red POWER/CHG indicator will go out when the battery pack is fully charged. • If the indicator flashes, refer to Troubleshooting (A 111).
Charging the Battery Pack 16 • If remaining battery time is an issue, you can power the camcorder using the compact power adapter so the battery pack will not be consumed. • Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or the day before, to ensure a full charge. • The first time you use a battery pack, fully charge it and then use the camcorder until the battery pack is completely depleted.
Preparing the Camcorder Preparing the Camcorder This section covers the basic preparations for the camcorder such as attaching the lens hood, adjusting the grip belt and adjusting the viewfinder and LCD screen. IMPORTANT • Be careful not to drop the camcorder when attaching, removing or adjusting the various accessories. Using a table or other stable surface is recommended.
Preparing the Camcorder Adjusting the LCD Screen Open the LCD panel 90 degrees. • You can rotate the panel downward or toward the lens. • Rotating the LCD toward the lens can be useful to allow the subject to monitor the LCD screen while you use the viewfinder. 18 Subject can monitor the LCD screen NOTES • You can adjust the brightness of the LCD screen with the > [£ Display Setup] > [LCD Brightness] or [LCD Backlight] setting.
Preparing the Camcorder Using the Viewfinder If it is difficult to use the LCD screen, you can use the viewfinder, which can be tilted 45 degrees upward. 1 Use the power switch to turn on the camcorder. (A 21). 2 Close the LCD panel (햲). 3 Pull out the viewfinder and adjust the viewing angle (햳). 4 Adjust the viewfinder using the dioptric adjustment lever (햴).
Preparing the Camcorder Attaching an optional wrist strap Attach the wrist strap to the strap mount on the grip belt, adjust the length and fasten. • You can use both for extra convenience and protection. 20 Attaching an optional shoulder strap Pass the ends of the shoulder strap through the strap mount on the grip belt and adjust the length of the strap.
Basic Operation of the Camcorder Basic Operation of the Camcorder Turning the Camcorder On and Off You can choose to turn the camcorder on in CAMERA ( ) mode for making recordings or MEDIA ( ) mode for playing back recordings. Select the mode using the power switch. 21 To turn on the camcorder Set the power switch to CAMERA for mode (A 32) or MEDIA for mode (A 84). • The POWER/CHG indicator will illuminate in green. mode mode POWER/CHG indicator To turn off the camcorder Set the power switch to OFF.
Basic Operation of the Camcorder Setting the Camera Mode When making recordings, you can change the camera mode to match your shooting style. 22 (Auto) mode Set the camera mode switch to N. With this mode, the camcorder takes care of all the settings while you concentrate on recording (A 33). This operating mode is suitable if you just prefer not to bother with detailed camcorder settings. (Manual) mode Set the camera mode switch to n.
First Time Settings First Time Settings Setting the Date and Time You will need to set the date and time of the camcorder before you can start using it. The [Date/Time] screen will appear automatically when the camcorder’s clock is not set. 23 Operating modes: 1 Use the power switch to turn on the camcorder. • The [Date/Time] screen will appear. 2 Touch a field you want to change (year, month, day, hours or minutes). • You can also push the joystick (ÏÐ) to move between the fields.
First Time Settings Changing the Language The default language of the camcorder is English. You can set it to one of 27 languages. Refer to Setup Menus (A 25) for details on how to navigate the menu for this procedure. 24 Operating modes: 1 Open the [Language ] screen. > [B ! System Setup] > [Language ] 2 Select the desired language and then select [OK]. 3 Select [X] to close the menu.
Using the Menus Using the Menus The camcorder’s functions can be adjusted from the setup menus, accessed by pressing the MENU button, or from the FUNC menu, accessed by touching or selecting the onscreen [FUNC] button. For details about the available menu options and settings, refer to Menu Options (A 96). Setup Menus 25 Following is a step-by-step explanation of how to select a typical option from the setup menus. Some menu items may require additional steps.
Using the Menus To use the joystick 1 Press the MENU button. 2 Push the joystick (Þ) to select the icon of the desired setup menu. • In the example, the B icon, corresponding to the [System Setup] menu. • If one of the icons in the top row is not selected when you open the menu, first push the joystick (Ý) to move the orange selection frame to one of the icons. 26 3 Push the joystick (Ý) to select the desired menu item ([Language and then press SET.
Using the Menus To use the joystick 1 On the shooting screen, push the joystick to select [FUNC] and then press SET. 2 Push the joystick (Ý) to select the desired icon from the left column and then press SET. 3 Push the joystick (Þ) to select the desired icon from the bottom row and then press SET. • To select a value from an adjustment dial, first push the joystick (Î) to highlight the dial in orange and then (Þ) to select the desired value.
Using SD Cards Using SD Cards The camcorder records clips and photos on commercially available Secure Digital (SD) cards1. The camcorder has two SD card slots and you can use two SD cards (in the manual, "SD card A" and "SD card B") to record on both simultaneously or to automatically switch to the other SD card when the SD card in use is full (A 30). Initialize SD cards (A 30) when you use them with this camcorder for the first time. 28 1 The SD card is used also to save menu settings files.
Using SD Cards Inserting and Removing an SD Card 1 Turn off the camcorder (햲). • Make sure the POWER/CHG indicator is off. 2 Open the SD card compartment cover (햳). 3 Insert the SD card straight, with the label facing the front of the camcorder, all the way into one of the SD card slots (햴). • You can also use two cards, one in each SD card slot. 4 Close the SD card compartment cover. • Do not force the cover closed if the SD card is not correctly inserted.
Using SD Cards Initializing an SD Card Initialize SD cards when you use them with this camcorder for the first time. You can also initialize a card to permanently delete all the recordings it contains. Operating modes: 1 Select [Initialize] for the desired SD card. 30 > [3 " Recording Setup] > [Initialize 8] > [6 Mem. Card A] or [7 Mem. Card B] > [Initialize] 2 Select [Yes]. 3 When the confirmation message appears, select [OK] and then select [X].
Using SD Cards 2 Select [4 Dual Recording] or [ select [X]. Relay Recording] (or [ Relay Recording]) and then • When dual recording is activated, the status of both SD cards will appear at the top right of the screen. • Select [Standard Recording] to not use either function. NOTES • Relay recording is available from SD card slot A to SD card slot B, and vice versa, but the switch will be performed only once.
Recording Clips and Photos 3 Recording Recording Recording Clips and Photos 32 This section explains the basics of recording clips* and photos. For details on recording audio, refer to Recording Audio (A 66). Before making important recordings for the first time, make test recordings using the video configuration(s) you plan to use to check that the camcorder operates correctly. Should the camcorder fail to operate correctly, refer to Troubleshooting (A 109).
Recording Clips and Photos When you have finished recording 1 Set the lens barrier switch to CLOSED to close the lens barrier. 2 Make sure that the ACCESS indicator is off. 3 Set the power switch to OFF. 4 Close the LCD panel and return the viewfinder to its retracted position. IMPORTANT • Be sure to save your recordings regularly (A 94), especially after making important recordings. Canon shall not be liable for any loss or corruption of data.
Recording Clips and Photos Reviewing the Latest Clip Recorded You can review the last 4 seconds of the last clip recorded with the camcorder without switching to mode. While reviewing the clip, there will be no sound from the built-in speaker. 1 Record a clip. 2 After you finish recording a clip, press the u button.
Video Configuration: Resolution, Bit Rate and Frame Rate Video Configuration: Resolution, Bit Rate and Frame Rate With the following procedures you can set the video configuration used for recording clips. Select the combination of resolution/bit rate and frame rate settings that best matches your creative needs. The color sampling will be YCbCr 4:2:0, 8 bit. Available options for some settings may change depending on previous selections for other settings.
Slow & Fast Motion Recording Slow & Fast Motion Recording You can record clips that have a slow motion or fast motion effect during playback, simply by selecting the desired slow/fast motion rate. Available slow/fast motion rates will vary depending on the resolution and frame rate currently selected. Sound is not recorded when slow & fast motion recording is activated. Operating modes: 36 1 Select [Slow & Fast Motion].
Shooting Modes Shooting Modes In mode, the camcorder offers a number of shooting modes that give you varying degrees of control over the camcorder’s settings. Select the shooting mode most appropriate to your needs or creative vision and adjust manually those settings you wish to control, letting the camcorder take care of the rest. Operating modes: 37 1 Select the shooting mode button. Shooting mode button 2 Select the desired shooting mode and then select [X].
Shooting Modes Special Scene Modes Using a Special Scene mode can be an easy and convenient alternative to adjusting detailed exposure settings. [HPortrait] The camcorder uses a large aperture, to achieve a sharp focus on the subject while blurring the background. 38 [ûSports] To record sports scenes, such as sporting events or dance scenes. [Q Night Scene] To record nightscapes with lower noise. [K Snow] To record in bright ski resorts without the subject being underexposed.
Shooting Modes [T Fireworks] To record fireworks. NOTES • [H Portrait]/[û Sports]/[K Snow]/[L Beach]: The picture may not appear smooth during playback. • [H Portrait]: The blur effect of the background increases the more you zoom in (S). • [K Snow]/[L Beach]: The subject may become overexposed on cloudy days or in shaded places. Check the image on the screen. • [R Low Light]: - Moving subjects may leave a trailing afterimage. - Picture quality may not be as good as in other modes.
Exposure Adjustment Exposure Adjustment At times, the overall exposure obtained automatically by the camcorder may not be best for your shot. You can select a shooting mode that will give you a varying amount of control over the aperture, shutter speed and gain, from partial to full control, while the camcorder automatically adjusts the settings that you do not.
Exposure Adjustment The exposure bar When the shooting mode is set to n, the exposure bar will appear on the screen, showing the optimal automatic exposure and current exposure. When the difference between current and optimal exposure is larger than ±2 EV, the indicator will flash at the edge of the exposure bar. Optimal exposure AE±0 Current exposure NOTES • You can adjust the aperture, shutter speed and gain using the CUSTOM dial (A 80).
Exposure Adjustment 2 Open the aperture screen. [FUNC] > [ Aperture] • An adjustment dial will appear on the screen. • You can select [ ] to display the zebra pattern (A 44, step 2) and check for overexposed areas. 3 Drag your finger along the dial to set the desired aperture value. 42 • You can also adjust the aperture value using the CUSTOM dial (A 80). • For available aperture values, see the manual exposure table (A 40) 4 Select [X].
Exposure Adjustment Exposure Lock (AE Lock) You can lock the current exposure settings and use them even when you reframe the picture. This function can only be used when the shooting mode is set to ’, ‚, “ or one of the Special Scene modes, except for [T Fireworks]. 1 Open the exposure screen. [FUNC] > [y Exposure Comp.] • An adjustment dial will appear on the screen. • You can select [ ] to display the zebra pattern (A 44, step 2) and check for overexposed areas.
Exposure Adjustment ND Filter Using the ND filter allows you to open up the aperture to obtain a shallower depth of field even when recording in bright surroundings. You can also use the ND filter to avoid the soft focus caused by diffraction when using small apertures. The ND filter can be set when the aperture value is F4.0. This function can only be used when the shooting mode is set to ’, ‚, “ or n. 1 Select [ND Filter].
Exposure Adjustment Backlight Correction When you need to record a scene with constant backlight conditions, you can use backlight correction to make the picture, especially the darker areas, brighter. This function cannot be used when the shooting mode is set to [T Fireworks]. 1 Select [ BLC Always On]. [FUNC] > [ 2 Select [ BLC Always On] 45 On] and then select [X]. • will appear at the left of the screen and the exposure will be adjusted to account for backlight conditions.
Automatic Gain Control (AGC) Limit Automatic Gain Control (AGC) Limit When recording in dark surroundings, the camcorder will automatically increase the gain to try to get a brighter picture. By setting a maximum gain value, you can limit the amount of noise in the picture and keep a darker look. This function can only be used when the shooting mode is set to ’, ‚ or “. Operating modes: 46 1 Open the AGC limit adjustment screen. [FUNC] > [ AGC Limit] > [n] • An adjustment dial will appear on the screen.
White Balance White Balance The camcorder uses an electronic white balance process to calibrate the picture and produce accurate colors under different lighting conditions. This function can only be used when the shooting mode is set to ’, ‚, “ or n. Operating modes: 1 Select [ 47 White Balance]. [FUNC] > [ White Balance] 2 Select the desired option and then select [X].
White Balance NOTES 48 • When you select a custom white balance: - Do not adjust the zoom to the digital zoom range (light blue area of the zoom bar). - Reset the white balance when you change locations or the lighting or other conditions change. - Depending on the light source, Å may keep flashing. The result will still be better than with [ Automatic].
Using Looks Using Looks You have the option of adding a “look” to your recordings. A look is a combination of various picture settings, such as color depth and sharpness, that can enhance the recording's visual quality. This function can only be used when the shooting mode is set to ’, ‚, “ or n. Operating modes: 1 Open the looks screen. [FUNC] > [ Looks] 2 Adjust the detailed settings. [i] > Select [–] or [+] to adjust the value • You can also drag your finger along the adjustment bar.
Zooming Zooming Operating modes: 50 To zoom in and out, you can use the focus/zoom ring, the zoom rocker on the camcorder or the zoom controls on the touch screen. You can also zoom using the optional RC-V100 Remote Controller (A 77). In addition to the 20x optical zoom, you can turn on the digital zoom* (400x) with the > [v Camera Setup] > [Digital Zoom] setting. This camcorder also features a digital tele-converter, which allows you to enlarge the image on the screen digitally.
Zooming Using the Zoom Rocker Move the zoom rocker toward T (wide angle) to zoom out. Move it toward S (telephoto) to zoom in. • By default, the grip zoom rocker operates at a variable speed – press gently for a slow zoom; press harder for faster zooms. You can perform the following procedure to adjust the zoom speed and to select a constant speed. 51 Setting the Zoom Speed You can set the zoom speed for the zoom rocker.
Zooming To use high-speed zoom in standby mode When high-speed zoom is activated and > [v Camera Setup] > [Grip Zoom Speed] is set to [Y] (variable zoom speed), in record standby mode you will be able to zoom at the highest speed available ([Z Fast]). Nevertheless, the zoom speed while recording will be determined by the [Zoom Speed Level] setting. 52 1 Select [High-Speed Zoom]. > [v ! Camera Setup] > [High-Speed Zoom] 2 Select [i On] and then select [X].
Zooming NOTES • When an optional RC-V100 Remote Controller is connected to the camcorder, you can zoom with the remote controller's ZOOM dial. At default settings, turn the dial right to zoom in (S) and left to zoom out (T). Soft Zoom Control Soft zoom control allows you to start and/or stop the zoom gradually. 1 Select [Soft Zoom Control]. > [v ! Camera Setup] > [Soft Zoom Control] 2 Select the desired option and then select [X].
Focus Adjustment Focus Adjustment The camcorder offers manual and automatic focus adjustment. When using manual focus, you can use the focus preset and peaking functions to assist you. When using automatic focus, you can use face detection & tracking to help make sure the subject is in focus. 54 Manual Focus Use the focus/zoom ring to focus manually. Manual focus is available even after touching the screen to adjust the focus automatically.
Focus Adjustment Focus Preset When manual focus is activated, you can register a certain focus point and then, after you focus manually somewhere else, have the camcorder return to the preset focus position. Current focusing distance Select to return to the preset focus position Operating modes: 1 Activate the manual focus and adjust the focus to the desired position (A 54). • The current approximate focusing distance will appear inside the focus frame and in the focus preset button.
Focus Adjustment Peaking When peaking is activated, the edges of objects in focus will be highlighted in red, blue or yellow on the screen. In addition, you can choose to switch the screen to black & white while peaking is activated, further emphasizing the edges. 1 Open the focus controls. [FUNC] > [< Focus] 56 2 If necessary, change the peaking settings. [i] > Desired options > [L] • For the black & white setting: Select [Off] or [On]. For the peaking color: Select [Red], [Blue] or [Yellow].
Focus Adjustment Autofocus When autofocus is activated, the camcorder continuously adjusts the focus on the subject in the center of the screen. The focusing range is 1 cm (0.39 in.; at full wide-angle, measured from the front of the lens barrel) to G and 60 cm (2 ft.; throughout the zoom range, measured from the front of the lens barrel) to G. Perform the following procedure to set the autofocus speed. Operating modes: 57 1 During manual focus: Press the AF/MF button. 2 Select [AF Mode].
Focus Adjustment • Autofocus may not work well on the following subjects or in the following cases. In such case, focus manually. - Reflective surfaces - Through dirty or wet windows - Subjects with low contrast or without vertical lines - Night scenes - Fast moving subjects - When subjects are at different distances. 58 Face Detection & Tracking During autofocus, the camcorder automatically detects people’s faces and uses this information to select the optimal focus and exposure settings.
Focus Adjustment NOTES • The camcorder may mistakenly detect the faces of non-human subjects. In such case, turn face detection & tracking off. • When face detection & tracking is activated, the slowest shutter speed used by the camcorder is 1/30 (1/24 if the frame rate is set to 23.98P). • In certain cases, faces may not be detected correctly. Typical examples include: - Faces extremely small, large, dark or bright in relation to the overall picture.
Image Stabilization Image Stabilization Use the image stabilizer to compensate for camcorder shake in order to achieve steadier shots. The camcorder offers 3 methods of image stabilization. Standard IS (Å): Standard IS compensates for a lower degree of camcorder shake, for example, for handheld shots while you remain stationary, and is suitable for shooting natural-looking scenes.
Setting the Time Code Setting the Time Code The camcorder generates a time code signal and records it with the recorded clips. The time code signal can be output from the HDMI OUT terminal. Depending on the frame rate used, you may be able to select between a drop frame an non-drop frame time code signal (A 63). Though the time code display style is different for DF and NDF, in this section the NDF display style is used for simplicity’s sake.
Setting the Time Code Setting the Time Code’s Initial Value If you set the running mode to [ 62 Preset], you can set the initial value of the time code. 1 Select [Initial Time Code]. > [3 " Recording Setup] > [Initial Time Code] • The time code setting screen appears with an orange selection frame indicating the hours. • Select [Reset] to reset the time code to [00:00:00:00] and return to the previous screen.
Setting the Time Code Selecting Drop Frame or Non-Drop Frame You can select between a drop frame (DF) or non-drop frame (NDF) time code, depending on how you plan to use your recordings. However, when the frame rate is set to 23.98P, the time code is set to non-drop frame (NDF) and cannot be changed. 1 Select [DF/NDF]. > [3 # Recording Setup] > [DF/NDF] 2 Select [ DF] or [ NDF] and then select [X]. • The time code display will differ depending on the setting.
Setting the User Bit Setting the User Bit The user bit display can be selected from the date or the time of recording, or an identification code consisting of 8 characters in the hexadecimal system. There are sixteen possible characters: the numbers 0 to 9 and the letters A to F. The user bit will be output from the HDMI OUT terminal. Operating modes: 64 1 Open the [User Bit Settings] screen.
Using the Mini Advanced Shoe Using the Mini Advanced Shoe Using the mini advanced shoe, you can attach compatible optional accessories to the camcorder to expand its functionality. For details about optional accessories available for use with your camcorder, refer to Optional Accessories (A 121). For details about how to attach and use the accessories, refer also to the instruction manual of the accessory used. 1 Open the mini advanced shoe cover. 2 Attach the optional accessory to the mini advanced shoe.
Recording Audio Recording Audio 66 The camcorder features 2-channel AAC audio recording and playback. You can record audio using the built-in microphone, the mini advanced shoe and optional DM-100 Directional Stereo Microphone or the MIC terminal (commercially available microphones). When recording outdoors in the open, the built-in microphone may record loud audible wind noise. In such cases, using an external microphone with a foam cover or wind screen is recommended.
Recording Audio Adjusting the L and R channels of the MIC terminal independently You can use the > [¡ Audio Setup] > [MIC ALC Link] setting to separate the audio level adjustment for the L and R channels of an external microphone connected to the MIC terminal, allowing each channel to be adjusted independently. 67 Audio Scenes You can have the camcorder optimize the audio settings of the built-in microphone by selecting the audio scene that matches your surroundings.
Recording Audio Settings for each audio scene [‘ Standard] 68 [’ Music] [ Festival] [‚ Speech] [ Meeting] [“ Forests [” Noise [„ Custom and Birds] Suppression] Setting] [¡ Audio] [ Manual]: 70 [ Manual]: 70 [ Manual]: 70 [ Manual]: 86 [ Manual]: 94 [ Manual]: 80 [ Manual]: 70 Selected by user (A 68) [Built-in Mic Att.
Recording Audio NOTES • When the audio level meter reaches the red point (0 dB), the sound may be distorted. • If the audio level meter display is normal but the sound is distorted, activate the microphone's attenuator with the following procedure. • We recommend using headphones to check the sound level while adjusting the audio recording level or when the microphone attenuator is activated.
Recording Audio Wind Screen (Built-in Microphone) The camcorder automatically reduces the background sound of wind when recording outdoors. You can select from two levels or turn off the auto wind screen. When recording in surroundings unaffected by wind or if you want to record low-frequency sounds, we recommend turning off the wind screen. Operating modes: 70 1 Select the [„ Custom Setting] audio scene (A 67). 2 Select [Built-in Mic Wind Screen].
Recording Audio Audio Equalizer (Built-in Microphone) You can use the audio equalizer to adjust sound levels by specifically targeting the high- or lowfrequency range and selecting one of 3 available levels. Operating modes: 1 Select the [„ Custom Setting] audio scene (A 67). 2 Select [Built-in Mic Freq. Response]. > [¡ ! Audio Setup] > [Built-in Mic Freq. Response] 3 Select the desired option and then select [X]. Options [h Normal]: Appropriate for balanced sound under most normal recording conditions.
Recording Audio Audio Compressor The audio compressor reduces the dynamic range between the loudest and quietest audio levels while maintaining a clear distinction. This can make listening to the audio easier. You can select one of two levels according to the audio recording conditions. The audio compressor can be used only when the audio limiter is activated. * Operating modes: 72 * In mode only for external microphones.
Using Headphones Using Headphones Use headphones for playback or to check the audio level while recording. The following procedure explains how to adjust the volume. Operating modes: 73 1 Select [Headphone Volume]. > [C " Audio Setup] > [Headphone Volume] 2 Select [Ô] or [Õ] to adjust the volume and then select [X]. • You can also drag your finger along the volume bar. To adjust the volume during playback During playback, adjust the headphones volume the same way you adjust the speaker’s volume (A 87).
Color Bars/Audio Reference Signal Color Bars/Audio Reference Signal You can have the camcorder output and record color bars and a 1 kHz audio reference signal and output them from the HDMI OUT terminal and × (headphone) terminal (audio reference signal only). Operating modes: 74 Recording Color Bars You can choose between SMPTE and ARIB color bars. 1 Select [Color Bars]. > [3 # Recording Setup] > [Color Bars] 2 Select the desired option and then select [X].
Pre-Recording Pre-Recording When pre-recording is activated, the camcorder starts recording continuously into a temporary memory (approx. 3 seconds) so when you press the START/STOP button, the clip will contain also a few seconds of video and audio recorded before you pressed the button. Operating modes: 1 Press the PRE REC button. • Pre-recording is activated and z appears at the top of the screen. • Press the button again to turn off pre-recording. 2 Press the START/STOP button.
Onscreen Displays Onscreen Displays You can turn most onscreen displays on or off. Operating modes: 76 Repeatedly press the DISP button to turn the onscreen displays on/off in the following sequence: mode: • All displays on • Onscreen markers1 • Displays off mode2: • Only data code on • All displays on 1 2 The onscreen markers will be displayed only when > [£ Display Setup] > [Onscreen Markers] is set to an option other than [j Off]. Pressing the DISP button has the same effect as touching the screen.
Using the Optional RC-V100 Remote Controller Using the Optional RC-V100 Remote Controller You can connect the optional RC-V100 Remote Controller to the camcorder’s REMOTE terminal in order to control the camcorder (including advanced recording functions) from a distance. The remote controller lets you turn the camcorder on, navigate the menus and remotely control the aperture and shutter speed, and more. Use the cable supplied with the remote controller to connect it to the camcorder.
Using the GP-E2 GPS Receiver Using the GP-E2 GPS Receiver When the optional GP-E2 GPS Receiver is connected to the camcorder's USB terminal, the camcorder will automatically record the GPS information (longitude, latitude and altitude) and the UTC (coordinated universal time) date and time to every recording you make (clips and photos). The recorded GPS information can be checked on the clip information screen or photo playback screen (single photo view).
Using the GP-E2 GPS Receiver IMPORTANT • In certain countries/regions, the use of GPS may be restricted. Be sure to use the GPS receiver in accordance with local laws and regulations of the country/region where the receiver is used. Be particularly careful when traveling outside of your home country. • Be careful about using the GPS receiver in places where the use of electronic devices is restricted.
CUSTOM Dial and Button 4 Customization Customization CUSTOM Dial and Button You can assign to the CUSTOM button and dial one of several frequently used functions. You can then adjust the selected function using the CUSTOM button and dial, without having to access the menu. 80 Operating modes: 1 Select [CUSTOM Dial & Button]. > [B # System Setup] > [CUSTOM Dial & Button] 2 Select the desired option and then select [X].
Assignable Buttons Assignable Buttons The camcorder offers 5 assignable buttons on the camcorder's body and an onscreen button (touch operation) to which you can assign various functions (assignable buttons). Assign often-used functions to the buttons you find most convenient, to personalize the camcorder to your needs and preferences. The names of the buttons printed on the camcorder also indicate their default settings.
Assignable Buttons Assignable functions Function name 82 Description A [B AF/MF] Switches between autofocus and manual focus. 54 [~ Face Only AF] Switches between standard autofocus and autofocus only when a face is detected. 58 [^ Magnification] Turns magnification on/off. 56 [ Turns the constant backlight correction function on/off. 45 [± Powered IS] Turns powered IS on/off. 60 [Å Set WB] Registers a custom white balance setting.
Saving and Loading Menu Settings Saving and Loading Menu Settings After you adjust settings in the various menus, you can save those settings on an SD card. You can load those settings at a later date or on another HF G50 camcorder so that you can use that camcorder in a similar way. Camcorder settings can only be saved on or loaded from the SD card in card slot B. Operating modes: 83 Saving Camcorder Settings 1 Insert the SD card where you want to save the camcorder's settings into SD card slot B.
Basic Playback 5 Playback Playback Basic Playback This section explains how to play back clips and photos. For details on playing back recordings using an external monitor, refer to Connecting to an External Monitor (A 92). 84 Operating modes: 1 Set the power switch to MEDIA. • The camcorder switches to screen appears. mode and the clip index 2 Look for the clip or photo you wish to play back. • Swipe left/right or select [Ï]/[Ð] to check other index pages.
Basic Playback 4 Touch the screen to display the playback controls. • During video or photo playback, the playback controls will disappear automatically after a few seconds. In video playback pause, touch the screen again to hide the playback controls. • For details on the playback controls, refer to Playback Controls (A 86).
Basic Playback Playback Controls The following playback types are available using the onscreen controls. Using the joystick, push the joystick to select the desired button and then press the joystick. Clip playback controls Playback type 86 Operation Onscreen icon During playback, select [Ø] / [×]. • Select repeatedly to increase the playback speed to approximately 5x 15x 60x the normal speed. • During fast playback, select [Ð] to return to playback at normal speed.
Basic Playback Adjusting the Volume During playback, audio will be output from the monaural built-in speaker. You can connect a pair of headphones to the × (headphone) terminal to listen to the audio in stereo. 1 During playback, touch the screen to display the playback controls. 2 Select [Ó/ ]. 3 Select [Ø]/[Ô] or [Ù]/[Õ] to adjust the volume and then select [K]. 87 • You can also drag your finger along the respective volume bar.
Clip and Photo Operations Clip and Photo Operations Deleting Clips and Photos You can delete clips and photos you are not interested in keeping. 88 Operating modes: Deleting Clips and Photos from the Index Screen 1 Open the desired index screen (A 84). • Drag your finger left/right until a clip or photo you want to delete appears. 2 Select [Delete]. [FUNC] > [Delete] 3 Select the desired option and then select [Yes].
Clip and Photo Operations Deleting a Photo during Playback 1 Play back the desired photo (A 84). 2 Touch the screen to display the playback controls and then delete the photo. [FUNC] > [Delete] > [¸ Proceed] > [Yes] 3 Drag your finger left/right to select another photo to delete or select [X]. IMPORTANT • Be careful when deleting recordings. Once deleted, they cannot be recovered. • Save copies of important recordings before deleting them (A 94).
Video Output Configuration 6 External Connections External Connections Video Output Configuration 90 The video signal output from the HDMI™ OUT terminal depends on the clip's video configuration and on various menu settings. The video signal output can also change depending on the capabilities of the connected monitor. Operating modes: Video Output Configuration (Recording) Recording video configuration Resolution Frame rate Scan mode setting1 Maximum resolution setting2 1920x1080 3840x2160 29.
Video Output Configuration Video Output Configuration (Playback) Video configuration of the clip Resolution Frame rate Scan mode setting1 Maximum resolution setting2 Resolution Frame rate 3840x2160 Same as that for video configuration 1920x1080 1920x1080 Same as that for video configuration 1280x720 (59.94P) 1280x720 59.94P — 1920x1080 59.94i 3840x2160 1920x1080 Same as that for video configuration 1920x1080 1920x1080 Same as that for video configuration 1280x720 (59.
Connecting to an External Monitor Connecting to an External Monitor When you connect the camcorder to an external monitor for playback, use the HDMI OUT terminal. Then, select the video signal output configuration. You can output also the onscreen displays (A 102). Operating modes: 92 Connection Diagram We recommend that you power the camcorder from a power outlet using the compact power adapter.
Connecting to an External Monitor • If the connected monitor is not compatible with the signal output from the camcorder, then HDMI output will stop. • The time code signal will not be output from the HDMI OUT terminal in the following cases. - In mode. - When slow & fast motion recording is activated. - When the output is 720x480 / 59.94P. • The frames value in the time code will run from 0 to 29 instead of 0 to 23 in the following cases.
Working with Clips on a Computer 7 Saving Clips Saving Clips Working with Clips on a Computer 94 Make sure to save clips recorded with this camcorder to a computer. To do so, you will need a card reader connected to a computer or a computer with an SD card slot. For details on transferring files from the SD card, refer to the computer’s instruction manual or OS’s help modules. Under certain circumstances, clips may be split and recorded as separate files.
Copying Clips and Photos Between SD Cards Copying Clips and Photos Between SD Cards You can copy clips and photos from one SD card to the other. Operating modes: 1 Open the desired index screen (A 84). • To copy all theclips or photos recorded on the same date (saved in the same folder), drag your finger left/right untila clip or photo you want to copy appears. 2 Select [Copy (6'7)] or [Copy (7'6)]. [FUNC] > [Copy (6'7)] or [Copy (7'6)] 3 Select the desired option and then select [Yes].
Menu Options 8 Additional Information Additional Information Menu Options Menu items not available appear grayed out. For details about how to select an item, refer to Using the Menus (A 25). For details about each function, see the reference page. Menu options without a 96 reference page are explained after the tables. Underlined menu options indicate default values. FUNC Menu FUNC Menu ( Mode) Onscreen button Setting options/Function AUTO n A Aperture] Aperture value adjustment dial, F1.
Menu Options FUNC Menu ( Mode) Menu item Setting options and additional information For clips: [y] index screen Single clip (playback pause) [Copy (6'7)], [Copy (7'6)] , [Select], [All Clips] – 95 88 – 89 For photos: [}] index screen Single photo view [Copy (6'7)], [Copy (7'6)] , [Select], [All Photos] 95 88 [Delete] [Trim] [Delete] Setup Menus [v Camera Setup] menu ( mode only) Menu item A Setting options [Digital Zoom] [j Off], [s 400x],
Menu Options [Digital Zoom]: Determines the operation of the digital zoom. • When you zoom, once you exceed the optical zoom range, the camcorder will automatically switch to digital zoom. • With the digital zoom the image is digitally processed, so the image resolution will deteriorate the more you zoom in. • Digital zoom is not available in mode or when > [v Camera Setup] > [Conversion Lens] is set to [¿ WA-H58].
Menu Options [Powered IS Button]: Determines the operation mode of the assignable button set to [È Powered IS] (A 60). [Î Press and Hold]: Powered IS will be activated while you hold the button pressed down. [Ï Toggle On/Off]: Each press of the button will turn the Powered IS function on and off. [Set WB Priority]: Convenient for times when you need to use a particular white balance setting frequently.
Menu Options Menu item 100 A Setting options [Used Space in Memory] [6], [7] – – [Initialize 8] [6 Mem. Card A], [7 Mem. Card B] 30 [Rec Command] [i On], [j Off] – 33 [HDMI Time Code] [i On], [j Off] – – [Time Code Mode] [ Preset], [ – 61 [Time Code Running Mode] [ Rec Run], [ – 61 [DF/NDF] [ – 63 [Initial Time Code] 00:00:00.00 to 23:59:59.
Menu Options Understanding file numbers • An example file number is “101-0107”. The first 3 digits indicate the folder number where the clip/ photo is stored and the last 4 digits indicate the consecutive number assigned to the recording (from 0001 to 9999). • The file number also indicates the name and location of the file on the SD card. For example, a clip numbered 101-0107 that was recorded on October 25, is located in the “DCIM\101_1025” folder as the file “MVI_0107.
Menu Options [£ Display Setup] menu Menu item 102 A Setting options [HDMI Max Resolution] [3840x2160]*, [1920x1080], [1280x720(59.94P)] [HDMI Scan Mode] [ * 92 92 – – – – mode only.
Menu Options [B System Setup] menu Menu item A Setting options [ ], [Dansk], [Deutsch], [ ], [English], [Español], [Français], [Italiano], [Magyar], [Melayu], [Nederlands], [Norsk], [Polski], [Português], [ ], [Suomi], [Svenska], [Türkçe], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ] 24 [Time Zone/DST] ["] (home time zone) or [#] (travel time zone): [New York], list of world time zones [$] (DST adjustment): Toggle on or off 24 [Date/Time] [Date/Time]: ([Jan.
Menu Options [Battery Info]: When you are using a battery pack that is compatible with Intelligent System, this option displays a screen where you can verify the battery charge (as a percentage) and the remaining recording time ( mode) or playback time ( mode). • If the battery pack is depleted, the battery information may not be displayed.
Appendix: Onscreen Icons and Displays Appendix: Onscreen Icons and Displays Recording Onscreen markers (A102) 105 Face detection frame (A58) Tracking (A58) Left side of the screen Icon/Display Description F00.0 Aperture value (A 41) ND1/0 ND filter (A 44) 1/00000 Shutter speed (A 40) 00.0dB Gain value (A 40) AE +/-0 0/0 +/-0 0/0 Exposure compensation (A 43) Exposure lock (A 43) 00.0dB AGC limit (A 46) =, ?, @, D Focus (A 54) 0.
Appendix: Onscreen Icons and Displays Top of the screen Icon/Display N 106 Description mode (A 32, 33) ’, ‚, “, n, H, I, Q, K, L, M, R, S, T Shooting mode (A 37) 00:00:00.00, 00:00:00:00 Time code (A 61) Ñ, Ü Recording operation (A 32) Ñ Record standby, Ü Recording z Pre-recording mode (A 75) Å, Ä, È (in yellow) Image stabilizer (A 60) , , , (in white), (in yellow), (in red) 000 min Remaining battery charge (A 16) The icon shows an estimate of the remaining charge.
Appendix: Onscreen Icons and Displays Icon/Display å, Description Microphone attenuator (A 69) ë, à ’, , ‚, ”, „ Wind screen (A 70) , “, Audio scenes (A 67) MIC power (A 66) 107 Bottom of the screen Icon/Display Description [FUNC] Opens the FUNC menu (A 26, 96) B, ~, ^, , ±, Å, Ä, z, , , Onscreen assignable button (A 81) • By default, the [ Photo] function (take a photo) is assigned to the button.
Appendix: Onscreen Icons and Displays Playback Clips Photos 108 Top of the screen Icon/Display [FUNC] Description Opens the FUNC menu (A 26). Ð, Ý, Ø, ×, Ö, Playback operation (A 86) Õ, Ô, Ó Ð: Playback, Ý: Playback pause, Ø/×: Fast playback, Ö/Õ: Slow playback, Ô/Ó: Frame reverse/advance 6 /7 SD card in use. 00:00:00.00, 00:00:00:00 Time code (A 61) 000000/000000 Current photo / Total number of photos x0.
Troubleshooting Troubleshooting If you have a problem with your camcorder, refer to this section. Consult a Canon Service Center if the problem persists. Power source The camcorder will not turn on or it turns off by itself. - The battery pack is depleted. Replace or charge the battery pack. - Remove the battery pack and reattach it correctly. Cannot charge the battery pack. - Make sure the camcorder is off so charging can start.
Troubleshooting When a subject flits across in front of the lens, the image appears slightly bent. - This is a phenomenon typical of CMOS image sensors. When a subject crosses very quickly in front of the camcorder, the image may seem slightly warped. This is not a malfunction. Changing the operating mode between recording (Ü)/record standby (Ñ)/playback (Ð) takes longer than usual. - When the SD card contains a large number of clips, some operations may take longer than usual.
Troubleshooting The red POWER/CHG indicator flashes rapidly (one flash at 0.5-second intervals). - The temperature of the battery pack is outside its operating range (approximately 0 – 40 °C (32 – 104 °F)). Remove the battery pack, warm it or let it cool down, as necessary, and try charging it again. - Charge the battery pack in temperatures between approximately 0 °C and 40 °C (32 °F and 104 °F). - The battery pack is damaged. Use a different battery pack.
Troubleshooting SD Card and Accessories Cannot insert the SD card. - The SD card you are trying to insert is not facing the correct direction. Turn it over and insert it. 112 Cannot record on the SD card. - A compatible SD card must be used (A 28). - Initialize the SD card (A 30) when you use it with the camcorder for the first time. - The SD card is full. Delete some recordings (A 88) to free some space or replace the SD card.
Troubleshooting List of Messages (in alphabetical order) Accessing the memory card. Do not remove the memory card. - You opened the SD card compartment cover while the camcorder was accessing the SD card or the camcorder started accessing the card as you opened the SD card compartment cover. Do not remove the SD card until this message disappears. Back up recordings regularly - This message may appear when you turn on the camcorder.
Troubleshooting Memory card is full - The SD card is full. Delete some recordings (A 88) to free some space or replace the SD card. Memory card is write-protected - The LOCK switch on the SD card is set to prevent accidental erasure. Change the position of the LOCK switch. 114 No clips - There are no clips on the SD card selected. No memory card - Insert a compatible SD card into the camcorder (A 28). No photos - There are no photos to play back. Operation canceled - Cannot access the SD card.
Safety Instructions and Handling Precautions Safety Instructions and Handling Precautions Be sure to read these instructions in order to operate the product safely. WARNING Denotes the risk of serious injury or death. • Stop using the product in any case of unusual circumstances such as the presence of smoke or a strange smell. • Do not touch any exposed internal parts. • Do not get the product wet. Do not insert foreign objects or liquids into the product.
Safety Instructions and Handling Precautions CAUTION 116 Denotes the risk of injury. • Do not leave the product in places exposed to extremely high or low temperatures. The product may become extremely hot/cold and cause burns or injury when touched. • Only mount the product on a tripod that is sufficiently sturdy. • Do not look at the screen or through the viewfinder for prolonged periods of time. This may induce symptoms similar to motion sickness.
Safety Instructions and Handling Precautions Battery Pack DANGER! Treat the battery pack with care. • Keep it away from fire (or it might explode). • Do not expose the battery pack to temperature higher than 60 °C (140 °F). Do not leave it near a heater or inside a car in hot weather. • Do not try to disassemble or modify it. • Do not drop it or subject it to shocks. • Do not get it wet. • Dirty terminals may cause a poor contact between the battery pack and the camcorder.
Safety Instructions and Handling Precautions Built-in Rechargeable Lithium Battery The camcorder has a built-in rechargeable lithium battery to keep the date/time and other settings. The built-in lithium battery is recharged while you use the camcorder; however, it will discharge completely if you do not use the camcorder for about 3 months. To recharge the built-in lithium battery: Connect the compact power adapter to the camcorder and leave it connected for 24 hours with the camcorder off.
Maintenance/Others Maintenance/Others Cleaning Camcorder Body • Use a soft, dry cloth to clean the camcorder body. Never use chemically treated cloths or volatile solvents such as paint thinner. Lens, Viewfinder and Instant AF Sensor • If the lens surface or Instant AF sensor is dirty, autofocus may not work properly. • Remove any dust or dirt particles using a non-aerosol type blower. • Use a clean, soft lens-cleaning cloth to gently wipe the lens or viewfinder. Never use tissue paper.
Maintenance/Others Using the Camcorder Abroad Power Sources You can use the compact power adapter to operate the camcorder and to charge battery packs in any country with power supply between 100 and 240 V AC, 50/60 Hz. Consult a Canon Service Center for information on plug adapters for overseas use.
Optional Accessories Optional Accessories (Availability differs from area to area) The following optional accessories are compatible with this camcorder. Select accessories are described in more detail in the following pages.
Optional Accessories Call or visit your local retailer/dealer for genuine Canon video accessories. You can also obtain genuine accessories for your Canon camcorder by calling: 1-800-828-4040, Canon U.S.A. Information Center. 122 Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc.
Optional Accessories VL-5 Video Light This video light enables you to record brightly in color even in dark places. It attaches to the camcorder’s mini advanced shoe for cable-free operation. DM-100 Directional Stereo Microphone This highly sensitive, super-directional microphone attaches to the camcorder’s mini advanced shoe. It can be used as directional microphone (monaural) or stereo microphone.
Specifications Specifications VIXIA HF G50 124 — Values given are approximate figures. System • Recording System Clips: MP4 Video: MPEG-4 AVC/H.264 Audio: MPEG-2 AAC-LC (2ch) Video configuration (resolution, bit rate, frame rate) 3840x2160: 150 Mbps (29.97P, 23.98P) 1920x1080: 35 Mbps, 17 Mbps (59.94P, 29.97P, 23.98P) 1280x720: 8 Mbps (59.94P) Color sampling: YCbCr 4:2:0, 8 bit Photos: DCF (Design rule for Camera File system), compatible with Exif1 Ver. 2.
Specifications • White Balance Auto white balance, Custom white balance (2 settings), User-defined color temperature or Preset white balance settings: Daylight, Tungsten • Minimum Illumination 0.3 lx ([Low Light] shooting mode, 1/2 shutter speed) 5.0 lx ([Programmed AE] shooting mode, 59.
Specifications CA-570 Compact Power Adapter • Power supply: 100 – 240 V AC, 50/60 Hz • Rated output / consumption: 8.4 V DC, 1.5 A / 29 VA (100 V) – 39 VA (240 V) • Operating temperature: 0 – 40 °C (32 – 104 °F) • Dimensions: 52 x 29 x 90 mm (2.1 x 1.1 x 3.5 in.) 126 • Weight: 135 g (4.8 oz.) BP-820 Battery Pack • Battery type Rechargeable lithium ion battery, compatible with Intelligent System • Rated voltage: 7.
Reference Tables Reference Tables Approximate recording times The camcorder uses a variable bit rate (VBR) to encode video so the actual recording times will vary depending on the subject. The following table shows the approximate recording times for a single recording operation until the indicated SD card becomes full. 127 SD card Bit rate 8 GB 16 GB 32 GB 64 GB 128 GB 150 Mbps 5 min. 10 min. 25 min. 55 min. 110 min. 35 Mbps 25 min. 55 min. 115 min. 240 min. 485 min. 17 Mbps 55 min.
Index 128 A D Abroad, using the camcorder . . . . . . . . . . . 120 Accessories . . . . . . . . . . . . . . . . . . . . . . . . 121 AGC (automatic gain control) limit . . . . . . . . 46 Aperture (f number) . . . . . . . . . . . . . . . . . . . . 40 Assignable buttons . . . . . . . . . . . . . . . . . . . . 81 Audio compressor . . . . . . . . . . . . . . . . . . . . 72 Audio equalizer . . . . . . . . . . . . . . . . . . . . . . . 71 Audio limiter . . . . . . . . . . . . . . . . . . . . . . . . .
L Language . . . . . . . . . . . . . . . . . . . . . . . . . . . Lens hood . . . . . . . . . . . . . . . . . . . . . . . . . . Look . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Low cut filter . . . . . . . . . . . . . . . . . . . . . . . . Low light (Special Scene mode) . . . . . . . . . . S 24 17 49 69 38 M (shooting mode) . . . . . . . . . . . . . . . . . . . . 40 Magnification . . . . . . . . . . . . . . . . . . . . . . . . 56 Maintenance . . . . . . . . . . . . . . . . . . . . . . . .
USA CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY FOR THE UNITED STATES 130 The limited warranty set forth below is given by Canon U.S.A., Inc. (“Canon USA”) with respect to Canon Consumer Digital Video Equipment (the “Equipment”) purchased in the United States. This limited warranty is only effective upon presentation of your Bill of Sale or other proof of purchase.
CANADA CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY The limited warranty set forth below is given by Canon Canada Inc. (“Canon Canada”) with respect to Canon Consumer Digital Video Equipment (the “Equipment”) purchased in Canada. This limited warranty is only effective upon presentation of a bill of sale or other proof of purchase for this Equipment to a Canon Service Facility when repairs are required.
Canon Inc. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan The information in this document is verified as of February 2019. Subject to change without notice. Visit your local Canon website to download the latest version. © CANON INC. 2019 PUB.
Canon PUB. DT0-B138-A VIXIA HFGSO 4K Camcorder Camescope 4K Videocamara 4K NTSC This guide contains only the most important information to start using the camcorder. To download the latest version of the complete Instruction Manual, refer to page 2. Ce guide presente uniquement les fonctions de base. Pour telecharger le mode d'emploi contenant des informations plus approfondies, consultez la page 2. Esta gufa solo muestra las funciones basicas.
Downloading the Full-version Instruction Manual (PDF File) This guide will get you started and show you how to use the most basic functions of your camcorder to shoot video, take photos and play back your recordings (using the camcorder or connecting it to an external monitor). To learn how to use the more advanced functions, to read important handling precautions and to consult the troubleshooting section if an error message is displayed, download the full-version Instruction Manual (PDF file).
Important Usage Instructions WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Water and Moisture - Hazard of electric shock - Do not use this product near water or in rainy/moist situations. Objects and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Be careful not to spill liquid of any kind onto the product.
IMPORTANT SAFETY INSTRUCTIONS 2 3 4 5 6 7 8 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
Precautions About the Battery Pack DANGER! Treat the battery pack with care. • Keep it away from fire (or it might explode). • Do not expose the battery pack to temperature higher than 60 °C (140 °F). Do not leave it near a heater or inside a car in hot weather. • Do not try to disassemble or modify it. • Do not drop it or subject it to shocks. • Do not get it wet. Important Note About Recording Media • Observe the following precautions while the ACCESS indicator is on or flashing.
Supplied Accessories Supplied Accessories The following accessories are supplied with the camcorder: 6 CA-570 Compact Power Adapter (incl.
Table of Contents Table of Contents 06 Supplied Accessories 08 Names of Parts 12 Charging the Battery Pack 14 Basic Preparations 15 Setting the Date, Time and Language 16 Using SD Cards 17 Recording Clips and Photos 19 Playing Back and Saving Clips and Photos 21 Connecting to an External Monitor 22 Onscreen Icons and Displays 26 Safety Instructions and Handling Precautions 30 Others 31 Abridged Specifications 32 Additional Information I 7
Names of Parts Names of Parts Left side view Ji] 21 " 1 3 t .--~ .
Names of Parts Right side view 7 1 2 3 4 Built-in speaker ( ~PDF> Adjusting the Volum0J MIC terminal ( ~PDF) Recording AudidJ HDMI OUT terminal ( ~PDF) Using the HDMI OUT Termina1 REMOTE terminal ( ~PDF) Using the Optional RC- V100 Remote Control/el) 8 5 6 7 8 0 (headphones) terminal ( ~PDF> Using HeadphoneSJ USB terminal ( ~PDF) Using the GP-E2 GPS Receive!) DC IN terminal ( ~PDF> Charging the Battery Pack') Grip belt ( ~PDF) Grip Belt and StrapSJ I 9
Names of Parts Front view canon l4KJ 1 --------Back view 4 5 ['.::::=r-;;.;;;;;:..+-,z:?.
Names of Parts Bottom view Top view 3 9 4 = gQg =o go:; o= IIIICll -=- 10 11 2 12 8 1 2 3 4 5 6 7 Power switch ( ~PDF> Turning the Camcorder On and Off, POWER / CHG (battery charging) indicator ( ~PDF> Charging the Battery Pac~ Built-in stereo microphone ( ~PDF> Recording Audio) Accessory shoe Camera mode switch (~PDF) Setting the Camera Mode) Grip zoom rocker (~PDF> Using the Zoom RockelJ ACCESS indicator ( ~PDF> Recording Clips and PhotOS) Mini advanced shoe ( ~PDF> Using the Mini Advanc
Charging the Battery Pack Charging the Battery Pack The camcorder can be powered with a battery pack or directly using the supplied CA-570 Compact Power Adapter. When you use the compact power adapter, the power of the battery pack will not be consumed. Charge the battery pack before use. 1 Attach the ferrite core to the cable about 6 cm (2.4 in.) from the DC plug (the plug to be connected to the DC IN terminal).
Charging t he Battery Pack 0 IMPORTANT • Turn off the camcorder before connecting or disconnecting the compact power adapter. After you turn off the camcorder, important data is updated on the SD card. Be sure to wait until the green POWER/CHG indicator goes out. • When using the compact power adapter, do not fix it permanently to one place as this may cause a malfunction.
Basic Preparations Basic Preparations This section covers the basic preparations for the camcorder such as attaching the lens hood, adjusting the grip belt and adjusting the viewfinder and LCD screen. 0 IMPORTANT • Be careful not to drop the camcorder when attaching, removing or adjusting the various accessories. Using a table or other stable surface is recommended. Preparing the Lens Hood, Grip Belt and LCD Panel 1 Remove the lens cap.
Setting the Date, Time and Language Setting the Date, Time and Language When you turn on the camcorder for the first time, you will need to set the date and time before using the camcorder. You can also change the date format and time zone. (For your convenience, you can do so after changing the language to your preference.) ~ PDF} Changing the Time Zone 1 Set the power switch to CAMERA. • When the internal clock is not set, the [Date/Time] screen will appear. 2 Change the date/time.
Using SO Cards Using SD Cards Use commercially available ,,s,;;,;,, SO, ~ SOHC (SO High Capacity) or ~~ SOXC (SO extended Capacity) cards. Make sure you use a compatible SD card. ~PDF) Using SD Cards 1 Turn off the camcorder. • Make sure the POWER/CHG indicator is off (G)). 2 Open the SD card compartment cover (®). 3 Insert the SD card straight, with the label facing the front of the camcorder, all the way into one of the SD card slots. • Close the SD card compartment cover.
Recording Clips and Photos Recording Clips and Photos This section explains the basics of recording clips* and photos in IAUTOI mode. For details on recording audio, refer to the Instruction Manual. Before making important recordings for the first time, make test recordings using the video configuration(s) you plan to use to check that the camcorder operates correctly. Should the camcorder fail to operate correctly, refer to the Instruction Manual.
Recording Clips and Photos CD NOTES • Use [M] mode to access advanced functions and to change various settings up to your preferences. ~PDF> Recording Clips and Photos Selecting the Video Configuration You can set the video configuration used for recording clips. Select the combination of resolution/ bit rate and frame rate settings that best matches your creative needs. ~PDF) Video Configuration: Resolution, Bit Rate and Frame Rate 1 Select the resolution and bit rate.
Playing Back and Saving Clips and Photos Playing Back and Saving Clips and Photos You c an play back clips and photos you have recorded. ~ PDF) Playback You c an also connect an external monitor to the camcorde·r (OJ 21). 1 Set the power switch to MEDIA. • The camcorder switches to IMED1AJ mode and the clip index screen appears. 2 Look for the clip or photo you wish to play back. • Swipe left/right or select [ ◄ )/[ ► ]to check other index pages.
Playing Back and Saving Clips and Photos ® @ G) Touch anywhere else to hide the playback controls or wait a few seconds. @Stop ® Volume controls ® Next clip ® Pause (select again to resume playback) @ Fast playback* (select again to increase the speed) (J) Beginning of the clip (select twice to skip to the beginning of the previous clip) * In playback pause, these controls are replaced by the slow playback controls. Photos: The selected photo is displayed in single photo view.
Connecting to an External Monitor Connecting to an External Monitor When you connect the camcorder to an external monitor for playback,use the HDMI OUT terminal. Then, select the video signal output configuration. ~PDF> Connecting to an External Monitor HDMIOUT terminal USB ml HDMIIN terminal UCE-------~]J+ HTC-100 High Speed ~ @ REMOTE HDMI Cable (optional) •I auaa I CD NOTES • We recommend powering the camcorder using the compact power adapter.
Onscreen Icons and Displays Onscreen Icons and Displays Recording Onscreen markers 0:00:01 )5 M ■ •o :1,ai:, @172min F4 0 NDl/4 1.1 30 0.0clB r.l 0h53m ~ JSlO,/i50 150'.'bps rrtd fllm MF 0 8m .fm!J - • r.m ~~G§· ~ It{/,!, i-c STBY• FUNC PHOTO r..i l! ,JFf ,, . l!l!I cy~I + I I Face detection frame Tracking Left side of the screen Icon/Display Description F00.
Onscreen Icons and Displays Top of the screen Icon/Display Description !AUTO! mode ( QZl PDF> Recording Clips and PhotoSj f!!!II!) P, TV, AV, M, 9 , ~.~ .... . Shooting mode ( QZl PDF) Shooting ModeSJ 00:00:00.00, 00:00:00:00 Time code ( QZl PDF> Setting the Time Codt!J ~.~. ■, • Recording operation ( QZl PDF> Recording Clips and PhotoSJ ■ Record standby, • Recording Pre-recording mode ( QZJPDF) Pre-Recordin{/) Image stabilizer ( QZJPDF) Image Stabilizatioll) ((.)) ' (<.
Onscreen Icons and Displays Icon/Display mo I Description Microphone attenuator (~PDF> Microphone Attenuator (Built-in Microphone or External Microphone)J r.i.!oit Wind screen ( ~PDF> Wind Screen (Built-in Microphone)J ~..,., ""'~.
Onscreen Icons and Displays Playback Clips Photos ► FUN( a @220rn1n ~~)f ~l)11,,1·1 0 00 04.03 rir ,i film ml clJ',16 113 0104 3840,)160 150',lb I 'J 20 f'M Oct 2',.2019 :-: Top of the screen Icon/Display Description [FUNG] Opens the FUNG menu (~PDF) FUNC MenU). ► ,II,~. ►► , ◄ I, I ► , ◄II , II► - [1] /[fil -- ~ Playback operation ( ~PDF> Playback Controls, ►: Playback, 11: Playback pause, ~/ ►►: Fast playback, ◄ I/I ► : Slow playback, ◄ II/II ► : Frame reverse/advance -SD card in use.
Safety Instructions and Handling Precautions Safety Instructions and Handling Precautions Be sure to read these instructions in order to operate the product safely. & WARNING Denotes the risk of serious injury or death. • Stop using the product in any 'c ase of unusual circumstances such as the presence of smoke or ~ strange smell. • Do not touch any exposed internal parts. • Do not get the product wet. Do not insert foreign objects or liquids into the product.
Safety Instructions and Handling Precautions Lt. CAUTION Denotes the risk of injury. • Do not leave the product in places exposed to extremely high or low temperatures. The product may become extremely hot/cold and cause burns or injury when touched. • Only mount the product on a tripod that is sufficiently sturdy. • Do not look at the screen or through the viewfinder for prolonged periods of time. This may induce symptoms similar to motion sickness.
Safety Instructions and Handling Precautions Battery Pack DANGER! Treat the battery pack with care. • Keep it away from fire (or it might explode). • Do not expose the battery pack to temperature higher than 60 °C (140 °F). Do not leave it near a heater or inside a car in hot weather. • Do not try to disassemble or modify it. • Do not drop it or subject it to shocks. • Do not get it wet. • Dirty terminals may cause a poor contact between the battery pack and the camcorder.
Safety Instructions and Handling Precautions Built-in Rechargeable Lithium Battery The camcorder has a built-in rechargeable lithium battery to keep the date/ time and other settings. The built-in lithium battery is recharged while you use the camcorder; however, it will discharge completely if you do not use the camcorder for about 3 months. To recharge the built-in lithium battery: Connect the compact power adapter to the camcorder and leave it connected for 24 hours with the camcorder off.
Others Others Condensation Moving the camcorder rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its internal surfaces. Stop using the camcorder if condensation is detected. Continued use may damage the camcorder.
Abridged Specifications Abridged Specifications The specifications given here are an abridged version of the full specifications of the camcorder. Be sure to read the full version of the instruction manual for the complete information. ~PDF) Specifications ♦ - Values given are approximate figures. • Recording Media (not included) For approximate recording times, see the table at the end . SD, SDHC (SD High Capacity) or SDXC (SD extended Capacity) card (2 slots) • Power Supply (rated) 7.
Additional Information Additional Information Approximate recording times The camcorder uses a variable bit rate (VBR) to encode video so the actual recording times will vary depending on the subject. The following table shows the approximate recording times for a single recording operation until the indicated SD card becomes full. SD card Bit rate 8GB 16 GB _1 11 32 GB 64GB 128 GB 150 Mbps 5 min. 10 min. 25 min. 55 min. 110min. 35 Mbps 55 min. 120 min. 115 min. 245 min. 240 min. 495 min.
Additional Information Optional Accessories Canon offers a wide range of optional accessories for your camcorder. ~PDF> Optional Accessories Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
USA CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY FOR THE UNITED STATES The limited warranty set forth below is given by Canon U.S.A., Inc. ("Canon USA") with respect to Canon Consumer Digital Video Equipment (the "Equipment") purchased in the United States. This limited warranty is only effective upon presentation of your Bill of Sale or other proof of purchase.
ICANADAI CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY The limited warranty set forth below is given by Canon Canada Inc. ("Canon Canada") with respect to Canon Consumer Digital Video Equipment (the "Equipment") purchased in Canada. This limited warranty is only effective upon presentation of a bill of sale or other proof of purchase for this Equipment to a Canon Service Facility when repairs are required.
canon Canon Inc. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501 , Japan USA CANON U.S.A., INC. NEW JERSEY OFFICE CANON U.S.A., INC. LOS ANGELES OFFICE 100 Jamesburg Road, Jamesburg, NJ 08831 USA 15955 Alton Parkway, Irvine, CA 92618 USA CANON U.S.A., INC. CHICAGO OFFICE CANON U.S.A., INC. HONOLULU OFFICE 100 Park Blvd., Itasca, IL 60143 USA 210 Ward Avenue, Suite 200, Honolulu, HI 96814 USA (' If you have any questions, call the Canon U.S.A.
Specifications Main Unit Specs Type 4K video camera (4K camcorder) Power Supply (rated) 7.4 V DC (battery pack), 8.4 V DC (DC IN) Television System NTSC Recording Format MP4 Video Recording System MPEG-4 AVC / H.264 Audio Recording System MPEG-2 AAC-LC (2ch 16 bit) Image Sensor 1/2.3-inch 4K UHD CMOS sensor Total Pixels Approx. 21.14 Megapixels (5352x3950) Effective Pixels Approx. 8.29 Megapixels (3840x2160) Lens Zoom Ratio: 20x Optical Focal Length: 3.67–73.
Optical system (lens shift) + electronic stabilization Image Stabilization Control modes: • Dynamic IS* • Powered IS * When in Dynamic IS, shooting angle will be different than when set to Standard IS or IS Off. IS Modes other than Intelligent IS: • Standard IS • IS off Filter Diameter 58mm Viewfinder 0.24-inch, TFT Widescreen color LCD (equivalent to approx. 1.56 million dots, 100% field of view) LCD Screen 3.0-inch LCD, Capacitive Touch Panel (approx. 0.
,~, ~ . i: l · CANON iMAGE GATEWAY fl'nFi} Store, share, play and print at this Canon online photo site. CERTIFIED •~; ), Canon Digital Learning Center ::,: or :,1 ANON DIGITAL: ~ NING CENTER ', :1 • l:w:-:o ,\rt1cles. Blof,S & f,for{!♦:, , --v \ • ·- WIRELESS HELP Learn How to Set Up Your Wi-Fi• Connection! USA Find easy step by step instructions for your camera at usa.canon.
Register Your Canon Imaging Product Now Visit www.canon.ca/register ENJOY THE BENEFITS OF REGISTERING Register Your Canon Imaging Product Now Visit www.registercanon.com • Receive automatic notification of the most up to date driver. firmware and software upgrades. • Receive the latest product and promotion information from Canon Canada Inc. • As a valued customer, you will receive important information relating specifically to your product.
canon Dealer Record of Canon Purchase (Fill in this information card at time of sale.) I 1111111 11111111111 DTO-B080 Purchaser's Name ------------------- MODEL NO. VIXIA HF G50 SERIAL NO.
