TS-E24mm f/3.5L TS-E45mm f/2.8 TS-E90mm f/2.
Thank you for purchasing a Canon product. Canon’s TS-E lenses are tilt-shift lenses designed for EOS cameras. The tilt-shift mechanism enables photographers to control the depth of field and the area photographed and to correct image distortion, making it possible to take sophisticated pictures that cannot be shot using a conventional lens.
a Safety Precautions a Safety Precautions ● Do not look at the sun or a bright light source through the lens or camera. Doing so could result in loss of vision. Looking at the sun directly through the lens is especially hazardous. ● Whether it is attached to the camera or not, do not leave the lens under the sun without the lens cap attached. This is to prevent the lens from concentrating the sun’s rays, which could cause a fire.
Nomenclature Tilt scale (→ 7) Infrared index (→ 11) Distance index Distance scale (→ 5, 11) Tilt index Depth-of-Field scale (→ 11) Lens mount index (→ 5) Tilt knob (→ 7) Contacts Shift knob (→ 9) Shift index Shift scale (→ 9) For detailed information, reference page numbers are provided in parentheses (→ **).
Nomenclature Tilt index Tilt scale (→ 7) Tilt lock knob (→ 7) Focusing ring (→ 5) Hood mount (→ 13) Shift index Rotation lock release button (→ 10) Lens Shift scale (→ 9) Shift lock knob (→ 9) Filter mounting thread (→ 14) For detailed information, reference page numbers are provided in parentheses (→ **).
1. Mounting and Detaching the Lens 2. Focusing See your camera’s instructions for details on mounting and detaching the lens. ● When mounting or detaching the lens, always ensure that the tilt and shift scales are set to the “0” position. ● After detaching the lens, place the lens with the rear end up to prevent the lens surface and contacts from getting scratched. ● If the contacts get soiled, scratched, or have fingerprints on them, corrosion or faulty connections can result.
3. Tilt Function Tilting inclines the lens relative to the image plane. When the tilt scale is set to the “0” position, the focusing and imaging planes are parallel. However, tilting puts the focusing plane at an angle to the imaging plane. ● Example 1 ● Example 2 To shoot so that all of an extensive subject is in focus, you must normally use a small aperture to obtain a large depth of field.
Using Tilt Loosen the tilt lock knob by turning it in the direction of the arrow. Turn the tilt knob to adjust the amount of tilt. Focus the shot by turning the focusing ring. Turn the tilt lock knob in the direction of the arrow to lock the amount of tilt for the shot. ● When you tilt the lens, sharp portions of the tilt mechanism are exposed and care should be taken to avoid touching these portions. ● If you use the tilt and shift functions on the TS-E24mm f/3.
4. Shift Function Shifting moves the optical axis of the lens in parallel off the center of the imaging plane. Shift can be used to good effect in the situations shown below. ● If you photograph a subject such as a building with a normal lens, the top of the building tapers away. But by placing the camera parallel to the building and shifting the lens, you can correct this tapering effect.
Using Shift Loosen the shift lock knob by turning it in the direction of the arrow. Turn the shift knob to adjust the amount of shift. Focus the shot by turning the focusing ring. Turn the shift lock knob in the direction of the arrow to lock the amount of shift for the shot. ● When you shift the lens, sharp portions of the shift mechanism are exposed and care should be taken to avoid touching these portions. ● If you use the tilt and shift functions on the TS-E24mm f/3.
5. Rotation The rotation function enables you to change the direction of tilt or shift by rotating the tilt-shift mechanism. With the lens mounted on the camera, push the rotation lock release button towards the mount and then turn the tilt-shift mechanism. ● The mechanism can be rotated through ±90°. The lens clicks every 30° and locks in place in the 90° position. ● When rotating the lens, set the tilt and shift scales to the “0” position.
6. Depth-of-Field Scale (TS-E24mm f/3.5L) The depth of field is the distance in front of and behind the plane of focus on the subject that appears sharp. The depth of field is indicated by the area between the depth-of-field scale lines below the distance scale. The numbers on the scale are F values, and for example, if the shooting distance is 1.5 m and the aperture is f/8, the area in focus will extend from about 1 m to 3 m.
8. TS-E Tripod Adapter (Sold Separately) With some camera models, the tilt, shift and rotation functions can no longer be used when the camera is mounted directly on a tripod. When this happens, fit the optional TS-E tripod adapter into the tripod mount socket on the camera before mounting the camera on the tripod. 9. Exposure Shots can be taken using AE (automatic exposure) as long as the tilt and shift scales are set to the “0” position.
10. Hoods The EW-75B II, EW-79B II and ES-65 III lens hoods can keep unwanted light out of the lens, and also protects the lens from rain, snow, and dust. Attach the hood using the following procedure. TS-E24mm f/3.5L Turn the hood in the direction of the arrow to attach it securely. 1 2 1 TS-E45mm f/2.8 • TS-E90mm f/2.8 1) Pressing the buttons on the base of the hood inwards, push the hood onto the hood mount on the lens.
Hoods ● Part of the picture may be blocked if the hood is not attached properly. ● When attaching or detaching the hood, grasp the base of the hood to turn it. To prevent deformation, do not grasp the rim of the hood to turn it. 11. Filters (Sold Separately) You can attach filters to the filter mounting thread on the front of the lens. ● Only one filter may be attached. ● Use a polarizing Canon filter. ● To adjust the polarizing filter, first remove the lens hood.
12. Extension Tubes 13. Close-up Lenses (Sold Separately) (Sold Separately) You can attach extension tube EF12 II or EF25 II for magnified shots. The shooting distance and magnification are shown below. Attaching a 250D or 500D close-up lens enables close-up photography. Compatibility with closeup lenses is as follows. TS-E24mm f/3.5L TS-E24mm f/3.5L EF12 II EF25 II Focusing Distance Range (mm) Close Long distance distance 171 179 166 167 Magnification (×) Close distance 0.62 1.
Specifications Focal Length/Aperture Lens Construction Minimum Aperture Diagonal Angle of View Vertical (Normal) Horizontal Min. Focusing Distance Max. Magnification Field of View Tilt amount Shift amount TS-E24mm f/3.5L 24mm f/3.5 9 groups, 11 elements f/22 84° 53° 74° 0.3m (1.0ft.) 0.14× 173 × 263mm (6.8 × 10.4inch) TS-E45mm f/2.8 45mm f/2.8 9 groups, 10 elements f/22 51° 30° 44° 0.4m (1.3ft.) 0.16× 150 × 226mm (5.9 × 8.9inch) ±8° ±11mm TS-E90mm f/2.8 90mm f/2.
Specifications TS-E24mm f/3.5L TS-E45mm f/2.8 TS-E90mm f/2.8 Filter Diameter 72mm 58mm Max. Diameter and Length 78 × 86.7mm (3.1 × 3.4inch) 81 × 90.1mm (3.2 × 3.5inch) 73.6 × 88mm (2.9 × 3.5inch) Weight 570g (18.4oz) 645g (20.8oz) 565g (18.2oz) Hood EW-75B II EW-79B II ES-65 III Lens Cap E-72 E-58 Case LP1216 LP1016 ● The lens length is measured from the mount surface to the front end of the lens. Add 21.5 mm when including the lens cap and dust cap.
CT1-7544-006 © CANON INC. 1991 2009.
cauou CT17600000 ENG EF LENS Quick Guide FRN OBJECTIF EF Guide de demarrage rapide Nomenclature CD Contacts Contacts ® Lens mount index ® Focus mode switch © Repere de monlage d'
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment.
STABILIZER ON 1 rOFF (~
