Canon _........
Thank you for purchasing a Canon product. The EOS 500 is a high-performance, digital SLR camera featuring a fine-detail CMOS sensor with 15.10 effective mega pixels, OIGIC 4, high-precision and high-speed 9-point AF (all cross-type points), highspeed 6.3 fps continuous shooting, and Live View shooting. The camera is highly responsive to any shooting situation at anytime, provides many features for demanding shoots, and expands shooting possibilities with system accessories.
Item Check List Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer.
Conventions Used in this Manual Icons in this Manual <0 > : Indicates the Quick Control Dial. < ~f: > : Indicates the Multi-controller. < @> : Indicates the setting button. " 04 06, 816 : Indicates that the respective function remains active for I 4 sec., 6 sec. or 16 sec. respectively after you let go of the button.
Chapters For first-time users, chapters 1 and 2 explain the camera's basic operations and shooting procedures. Introduction 21 Camera basics. 1 Getting Started 2 Basic Shooting 3 Image Settings 591 4 Setting the AF and Drive Modes 831 5 Advanced Operations 6 Live View Shooting 7 8 9 Image Playback 131 Sensor Cleaning 1471 Printing Images and Transferring Images to a Computer 1531 10 Customizing the Camera 11 Reference I 18 7 1 Fully automatic shooting for different subjects.
Contents Introduction 1 2 Item Check List.
Contents 3 Image Settings 59 Setting the Image-recording Quality 60 ISO: Setting the ISO Speed 63 ~:~ Selecting a Picture Style 65 ~:~ Customizing a Picture Style 67 ~:~ Registering a Picture Style 69 WB: Setting the White Balance 71 Custom White Balance 72 Setting the Color Temperature 73 White Balance Correction Lens Peripheral Illumination Correction 74 76 Creating and Selecting a Folder.
Contents ~ Using the Built-in 6 Flash Flash Control 111 External Speedlites 113 Live View Shooting 01 115 Preparing for Live View Shooting 118 Using AF to Focus 121 Focusing Manually 127 ~ Image Playback 131 132 INFO.
Contents 9 Printing Images and Transferring Images to a Computer Preparing to Print 154 ~( 156 161 163 166 167 Printing Trimming the Image Digital Print Order Format (DPOF) Direct Printing with DPOF lE. Transferring Images to a Personal Computer 10 11 153 Customizing the Camera 171 Setting Custom Functions Custom Functions 172 173 Custom Function Settings 174 C.Fn I : Exposure 174 C.Fn II : Image C.Fn III : Autofocus/Drive C.
Index to Features • Image improvement features '/Power • Battery • Charging • Battery check @ Power outlet • Auto power off ~ ~ p.24 p.28 -+ p.190 -+ p.44 p.31 .Zoom -+ -+ .Image Stabilizer -+ p.33 • Attaching/Detaching p.32 • Lens peripheral illumination -+ correction • Auto Lighting Optimizer -+ • Noise reduction for long exposures -+ • Noise reduction for high ISO -+ -+ • Highlight tone priority • Language --7 p.42 • Date/Time -+ • LCD brightness adjustment p.176 p.177 -+ -+ p.
Index to Features Shooting Image playback • Creative Auto -+ p.57 • Image review time • Quick Control screen -+ p.38 • Self-timer -+ p.90 • Program AE -+ p.92 • Shutter-priority AE .... p.94 • Aperture-priority AE .Bulb -+ -+ -+ ~ -+ p.106 • Manual exposure Mirror lockup p.96 p.98 p.104 iExposure adjustment • Exposure compensation -+ p.101 .AEB -+ p.102 .AE lock ~ p.103 -+ p.174 ..
Handling Precautions Camera Care .. This camera is a precision instrument. Do not drop it or subject it to physical shock. • The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult your nearest Canon Service Center. Wipe off any water droplets with a dry cloth. If the camera has been exposed to salty air, wipe it with a well-wrung wet cloth.
Handling Precautions LCD Panel and LCD Monitor • Although the LCD monitor is manufactured with very high precision technology with over 99.99% effective pixels, there might be a few dead pixels among the remaining 0.01 % or less pixels. Dead pixels displaying only black or red, etc., are not a malfunction. They do not affect the images recorded. • If the LCD monitor is left on for a prolonged period, screen burn-in may occur where you see remnants of what was displayed.
Quick Start Guide 1 ~ To recharge the battery, se.e page 24. When attaching an EF-S lens, align it -~ • with the white index on the camera. ~&.~> "~'~'~or other lenses, align it with the red ,, Index. o .'----"--'-.J 4 Insert the battery. (p.26) Attach the lens. (p.31) 2 3 ~ _ ]f" _-+-' Set the lens focus mode switch to . (p.31) Open the slot cover and llnsert a card. (p.29) I ' O I • Face. the Iabe.I Si.d.e towar.d. you .
Quick Start Guide Set (Full Auto). (pA8) 6 All the necessary camera settings will be set .automatically. I 7 .. .. .. Focus the subject. (p.35) ~.'\o . . .-'~'''''1-' .. ' ~ ,r" '.'.... , .... ~' ~'.,: Look through the viewfinder and aim ~~. · h~ ~;~.':~~-ti: ~ , . . . .~ .• , the viewfinder center over the subject. Press the shutter button halfway, and ~ '\--~1 the camera will focus the subject. p' •."Ii, If necessary, the built-in flash will pop..JI"jI :-:1:, _.
Nomenclature For detailed information, reference page numbers are provided in parentheses (p. **). < 00· WB > Metering mode selection/White balance selection button (p.1 00/71) < J>:- > LCD panel illumination button (p.1 04) LCD panel (p.18) < AF •DRIVE> AF mode selectionlDrive mode selection button (p.84/89) ---. EF lens mount index (p.31) Built-in f1ash/AF-assist beam (p.107/87) ISO speed setting/ ..- Flash exposure compensation button (p.63/109) EF-S lens mount index (p.
Nomenclature < -e- > Focal plane mark _ < ·:f:· > Multi-controller (p.36) .. < AF-ON > AF start button (p.35,84,118) */ ~.e. > AE lock/ FE lock button/lndex/ Reduce button (p.1 03/11 0/135/137,161 ) < Dioptric adjustment knob (p.34) Eyecup (p.97) I Viewfinder eyepiece Live View shooting/Print/Share button (p.117/159,168) AF point selection/ Magnify button (p.86/137,161)
Nomenclature LCD Panel Shutter speed - - - - - - - - - - - , AF point selection ([ - : : : • ]) Busy (buSY)-------·----------l - Card full warning (FuLL CF) Built-in flash recycling (buSY) ---~ Card error warning (Err CF) Image-recording quality (p.60) No card warning (no CF) L. Large/Fine L.II Large/Normal M. Medium/Fine M .II Medium/Normal Small/Fine S .II Small/Normal ~ RAW S~ Small RAW S. Exposure level indicator -----------l Exposure compensation amount (p.101) AEB range (p.
Nomenclature Viewfinder Information AF points (Superimposed display) Focusing screen Spot metering circle I < * ~<.> -.::J L > AE lockl AEB in-progress < ~ > Flash-ready Focus confirmation light I L Max.
Nomenclature .. " . . . ... , . ~ - . . . . . ~ Mode Dial The Mode Dial has the Basic Zone modes and Creative Zone modes. Camera User Settings Most camera settings can be registered under [II or ~ (p.186). Creative Zone These modes give you more control over the result. P : Program AE (p.92) Tv : Shutter-priority AE (p.94) Av : Aperture-priority AE (p.96) M : Manual exposure (p.98) A·DEP : Automatic depth-of-field AE (p.99) Basic Zone All you do is press the shutter button.
Nomenclature Nomenclature for Kit Lenses EF-S18-200mm f/3.5-5.6 IS and EF-S18-55mm f/3.5-5.6 IS ,.....---- Focus mode switch (p.31) Focusing ring (p.88,127) ,---Zoom ring (p.32) Hood mount ------, (p.209, 210) ttm'lllll!!l-_ ~--.-- I Zoom position index (p.32) 1-------Filter thread (front of lens) (p.209, 210) Image Stabilizer switch (p.33) "l~t j' Lens mount index (p.31) L--_ Contacts (p.13) EF-517-85mm f/4-5.6 15 U5M and EF28-135mm f/3.5-5.615 U5M Focus mode switch (p.
Nomenclature Battery Charger CG-580 Charger for Battery Pack BP-511 A (p.24). () - Power plug This power unit is intended to be correctly orientated in a vertical or floor mount position. IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet.
Getting Started This chapter explains preparatory steps and basic camera operations. ._---_.. _-----..-...-.-- Attaching the Strap Pass the end of the strap through the camera's strap mount eyelet from the bottom. Then pass it through the strap's buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle. • The eyepiece cover is also attached to the strap (p.1 05).
Recharging the Battery 1 Remove the protective cover. • When you remove the battery from the camera, be sure to reattach the cover to protect it against short circuiting. 2 Battery pack slot index CG-580 Attach the battery. • Align the battery's front edge with the battery charger's index line. While pressing down the battery, slide it in the direction of the arrow. • To detach the battery, follow the above procedure in reverse. Recharge the battery.
Recharg ing the Battery ~~~ Tipsfo.r Using the Battery and Charger • Recharge the battery on the day before or on the day it is to be used. Even during non-use or storage, a charged battery will gradually discharge and lose its power. • After recharging the battery, detach it and unplug the power cord or prongs from the power outlet. I • You can attach the cover in a different orientation to indicate whether the battery has been recharged or not.
Installing and Removing the Battery Installing the Battery Load a fully charged Battery Pack BP-511 A into the camera. Open the battery compartment cover. • Slide the lever as shown by the arrow and open the cover. Insert the battery. • Insert the end with the battery contacts. • Insert the battery until it locks in place. Close the cover. • Press the cover until it snaps shut. [l] Battery Pack BP-514, BP-511, or BP-512 can also be used. Removing the Battery ---._._ ... - .~ . . ....,..
Turning on the Power ,,----- - : The camera is turned off and <,» does not operate. Set to this position when not using the camera. : The ca mera tu rns on. : The camera and < 0 > operate (p.37). I About the Automatic Self-Cleaning Sensor • Whenever you set the power switch to , the sensor cleaning will be executed automatically. During the sensor cleaning, the LCD monitor will display < .+0+ >.
Turning on the Power Checking the Battery Level When the power switch is set to < ON > or <..,J >, the battery level will be indicated in one of four levels: rNi!ID ~[$J R @jJ I)) [ @r~ : J Battery level is OK. ~ : Battery level is slightly down, AI FOCUS but adequate power remains. 0 " I / / I " -~- : Battery will be exhausted soon. -/Y::- : Battery must be recharged. " Battery Life .. I / [Approx. number of shots] ,.
Installing and Removing the CF Card Although the thickness is different between the two types of CF cards, either one can be inserted into the camera. Also, Ultra DMA (UDMA) cards and hard disk-type cards can be used. Installing the Card 1 Open the cover. I • 81 ide the cover as shown by the arrow to open it. '----~--- - - Insert the card. Label side • As shown in the illustration, face the label side toward you and insert the end with the small holes into the camera.
Installing and Removing the CF Card Removing the Card 1 Open the cover. • Set the power switch to . • Make sure the access lamp is off, then open the cover. Access lamp 2 Remove the card. • Press the card ejection button. ~ The card will come out. • Close the cover. Card ejection button -- • The access lamp lights or blinks while the picture is taken, when data is being transferred to the card and when data is being recorded, read, or erased on the card.
Attaching and Detaching a Lens Attaching a Lens 1 Remove the caps. • Remove the rear lens cap and the body cap by turning them as shown by the arrow. EF-S lens mount index Attach the lens. • Align the EF-S lens with the camera's white EF-S lens mount index and turn the lens as shown by the arrow until it clicks in place. • When attaching a lens other than an EF-S lens, align the lens with the red EF lens mount index. On the lens, set the focus mode switch to (autofocus).
Attaching and Detaching a Lens About Zooming To zoom, turn the zoom ring on the lens with your fingers. If you want to zoom, do it before focusing. Turning the zoom ring after achieving focus may throw off the focus slightly. While pressing the lens release button, turn the lens as shown by the arrow. • Turn the lens until it stops, then detach it. • Attach the dust cap to the detached lens. To owners of the EF-S18-200mm f/3.5-5.6 IS kit lens: ._- .. I @ r [(2) ~ 0 n A .J _ ..
About the Lens Image Stabilizer The procedure explained here is based on the EF-S 17-85mm f/4-5.6 IS USM lens as an example. * IS stands for Image Stabilizer. 1 Set the IS switch to . • Set the camera's power switch to . 2 Press the shutter button halfway. .. The Image Stabilizer will operate. the pictu reo 3 Take • When the picture looks steady in the viewfinder, press the shutter button completely to take the picture. -- • The Image Stabilizer is not effective for moving subjects.
Basic Operation Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. • Turn the knob left or right so that the nine AF points in the viewfinder look sharp. If the camera's dioptric adjustment still cannot provide a sharp viewfinder image, using Dioptric Adjustment Lens E (10 types, sold separately) is recommended. Holding the Camera To obtain sharp images, hold the camera still to minimize camera shake. Horizontal shooting 1. 2. 3. 4. 5. 6.
Basic Operation Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing halfway This activates autofocusing and automatic exposure metering that sets the shutter speed and aperture. The exposu re setti ng (shutter speed and aperture) is displayed on the LCD panel and in the viewfinder ( 04 ). Pressing completely This releases the shutter and takes the picture.
Basic Operation • , • '.. r • _ • ~ _ , .. • • t Using the Main Dial for Selecting After pressing a button, turn the dial. When you press a button, its function remains selected for 6 seconds ( (6). During this time, you can turn the < > dial to set the desired setting. When the function turns off or if you press the shutter button halfway, the camera will be ready to shoot. Use this dial to select or set the metering mode, AF mode, ISO speed, AF point, etc.
Basic Operation < 0 > Using the Quick Control Dial for Selecting Before using the < 0 > dial, set the power switch to <....J >. After pressing a button, turn the <0> dial. When you press a button, its function remains selected for 6 seconds ( 06 ). During this time, you can turn the < 0 > dial to set the desired setting. When the function turns off or if you press the shutter button halfway, the camera will be ready to shoot.
Using the Quick Control Screen The shooting settings are displayed on the LCD monitor where you can quickly select and set the functions. This is called the Quick Control screen. 1 Display the Quick Control screen. • Press < ~f: > straight down. ~ The Quick Control screen will appear (10 sec.). 2 Basic Zone modes Set the desired setting. • Use < ':f: > to select the function. • In the Basic Zone modes, you can select certain drive modes (p.89) and the image-recording quality (p.60). ...
Using the Quick Control Screen Quick Control Screen Nomenclature Aperture (p.96) ~-~. Shutter speed (p.94 )···········1 Exposu re ---------, compensation/ AEB setting (p.1 02) Shooting mode (p.20) Image-recording quality (p.60) 1/125 M --ISO speed (p.63) F8.0 lmJAUTO D+ -2 .. 1. .rv.. 1.:2 ~ ~ .1. r 19;~~5J ~ [$J .L ONE SHOT Q2,H Aa~;il eXPllsun'cornp. ~ AF point (p.86) -~ . Picture Style (p.65) L .,. Highlight tone priority (p.177) _ Flash exposure compensation (p.1 09) I .
Menu Operations By setting various functions with the menus, you can set the imagerecording quality, date/time, etc. While looking at the LCD monitor, you use the
Menu Operations Menu.· SettingProcecJure 00 Quality Red-eye On/Off Beep Shoot w/o card ~L Review time 2 sec. Review time • Off On On Peripheral iIlumin. correct. Quality Red-eye On/Off Beep Shoot wI 0 card 1 Display the menu. Press the
button to display the menu. a tab. 2 Select • Turn the < a dial to select a tab. I 3 Select the desired item. > • Turn the <0> dial to select the item, then press < @ > . AL Off On On 2 sec. Peripheral illumin. correct.Before You Start mmI!J Setting the Interface Language 1 Select [Language]. LCD brightness Date/Time Language Video system !: ...........:...;+;08/241'0813:10 . E~gli~~. • Under the [~:] tab, select [Language] (the third item from the top), then press <@>. NTSC 2 Set the desired language. • Turn the < 0 > dial to select the language, then press <@>. • The language will change. mmI!J Setting the Date and Time Check if the camera's date and time are set correctly.
Before You Start mI3mJ Formatting the Card If the card is new or was previously formatted by another camera or personal computer, format the card with the camera. __ When the card is formatted, all images and data in the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images to a personal computer, etc., before formatting the card. 1 Select [Format]. • Under the [~.] tab, select [Format], then press <8>.
Before You Start rmm.1 Set the Power-off Tlme/Auto Power Off You can change the auto power-off time for the camera to turn off automatically after a certain period of non-operation. If you do not want the camera to turn off automatically, set this to [Off]. After the power turns off, you can turn on the camera again by pressing the shutter button or other button. 1 Select [Auto power off] . • Under the [~.] tab, select [Auto power off], then press <@>. 2 Set the desired time .
Before You Start UiI3mJ 'Reverting theCarnera to the Default Settings * The camera's shooting settings and menu settings can be reverted to the default. 1 Select [Clear settings]. INFO. button Flash control • Under the [~:] tab, select [Clear settings], then press <@>. Normal disp. Camera user setting ((ear settmgs Firmware Ver. 1.0.0 I Clear settings - Clea~ ~l! camera settl,,!g~. - _ 2 Cancel 3 Select [Clear all camera settings].
Before You Start Camera Settings Camera Settings On Image jump wfB Auto rotate On Shoot wfo card On LCD brightness ~!:. Review time 2 sec. .DatelTime No changes Highlight alert Disable Language No changes Disable Video system No changes Auto power off 1 min. Beep AF point display "i$togr~m ........... ; .... '''''.' Brightness 10 images 0.
Basic Shooting This chapter explains how to use the Basic Zone modes on the Mode Dial for best results. With the Basic Zone modes, all you do is point and shoot and the camera sets everything automatically (p.196). Also, to prevent botched pictures due to mistaken operations, shooting settings cannot be changed in the Basic Zone modes. I:ilAbout the Auto Lighting Optimizer In the Basic Zone modes, the Auto Lighting Optimizer will adjust the image automatically to obtain the optimum brightness and contrast.
o Fully Automatic Shooting 1 Set the Mode Dial to <0>. AF point 2 Aim any AF point over the subject. • All the AF points will operate, and focus will generally be achieved at the AF poi nt coveri ng the closest object. • Aiming the center AF point over the subject will make focusing easier. Focus the subject. • Press the shutter button halfway, and the lens focusing ring will rotate to focus. ~ The AF point which achieves focus will briefly flash in red.
o , • FAQ • The focus confirmation light <. Fully Automatic Shooting > blinks and focus is not achieved. Aim the AF point over an area having good contrast between light and dark, then press the shutter button halfway (p.88). If you are too close to the subject, move away and try again. • Sometimes multiple AF points flash simultaneously. This indicates that focus has been achieved at all those AF points. As long as the AF point covering the desired subject flashes, you can take the picture. <.
o Full Auto Techniques Recomposing the Shot Depending on the scene, position the subject toward the left or right to create a balanced background and good perspective. In the <0> (Full Auto) mode, while you press the shutter button halfway to focus a still subject, the focus will be locked. You can then recompose the shot and press the shutter button completely to take the picture. This is called "focus lock". Focus lock is also possible in other Basic Zone modes (except <~> Sports).
\\ Shooting Portraits <" The > (Portrait) mode blurs the background to make the human subject stand out. It also makes flesh tones and the hair look softer than with the < 0 > (Full Auto) mode. I ~~~ Shooting Tips • The farther the distance between the subject and background, the better. The further the distance between the subject and background, the more blurred the background will look. The subject will also stand out better in front of a plain, dark background. • Use a telephoto lens.
~ Shooting Landscapes Use the < AA > (Landscape) mode for wide scenery, night scenes, or to have everything in focus from near to far. The greens and blues also become more vivid and sharper than with < 0 > (Full Auto). ~~~ Shooting Tips • With a zoom lens, use the wide-angle end. When using the wide-angle end of a zoom lens, objects near and far will be in focus better than at the telephoto end. It also adds breadth to landscapes. • Shooting night scenes.
~ Shooting Close-ups When you want to photograph flowers or small things up close, use the <~> (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). I ~~~ Shooting Tips • Use a simple background. A simple background makes the flower, etc., stand out better. • Move to the subject as close as possible. Check the lens for its minimum focusing distance. Some lenses have indications such as < ~ O.28m/O.9ft>.
~ Shooting Moving Subjects To photograph a moving subject, whether it is a child running or a moving vehicle, use the < ~ > (Sports) mode. ~~~ Shooting Tips • Use a telephoto lens. Using a telephoto lens is recommended so you can shoot from afar. • Use the center AF point to focus. Aim the center AF point over the subject, then press the shutter button halfway to auto focus. During autofocusing, the beeper will continue beeping softly. If focus cannot be achieved, the focus > will blink. .
~ Shooting Portraits at Night To shoot someone at night and obtain a natural-looking exposure in the background, use the <~> (Night Portrait) mode. I ~~~ Shooting Tips • Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Also, use a tripod to prevent camera shake. • Keep the person within 5 meters/16.4 feet from the camera. Under low light, the built-in flash will fire automatically to obtain a good exposure of the person.
rI;J Disabling Flash In places where flash photography is prohibited, use the <~> (Flash Off) mode. This mode is also effective for candlelight scenes when you want to capture the ambient light. ~~~ Shooting Tips • If the numeric display in the viewfinder blinks, take care to prevent camera shake. Under low light when camera shake is prone to occur, the viewfinder's shutter speed display will blink. Hold the camera steady or use a tripod.
~ Creative Auto Shooting The < @) > (Creative Auto) mode enables you to easily change the picture's brightness, etc. The default settings are the same as the < 0 > (Full Auto) mode. * CA stands for Creative Auto. -1 1 j 2 3 Set the Mode Dial to <@». ~ The Creative Auto screen appears on the LCD monitor. Press < ~f: > straight down. ~ You can use < ~f: > to select a function. • Functions (1) to (6) shown on the next page can be selected. Set the desired setting.
@) Creative Auto Shooting (1 ) Shutter speed and aperture _ L _ _. . (2) , (3) . . . (4) (6) ........... (5) Possible shots Battery check Maximum burst (1) Flash firing < ~A > (Auto firing), < ~ > (Flash on), or < ~ > (Flash off) can be selected. If you set <~>, see "Disabling Flash" on page 56. (2) Blurring/sharpening the background If you move the index mark toward the left, the background will look more blurred. If you move it toward the right, the background will look more in focus.
Image Settings This chapter explains image-related function settings: Image-recording quality, ISO speed, Picture Styles, white balance, color space, etc. • In the Basic Zone modes, you can only set the imagerecording quality and lens peripheral illumination correction, create and select folders, and set the file numbering as explained in this chapter. • The icon on the right of the page title indicates that the respective feature is available only in Creative Zone modes "* (P, Tv, Av, M, A-OEP).
Im3mI Setting the Image-recording Quality _ You can select the pixel count and the image quality. The following JPEG quality settings can be set: . l , .Ill, • M, .II M, • S, .II RAW images captured as fimW, SfimW 1, or SfimW2 must be processed with the provided software (p.62). S. 1 Select [Quality]" Quality ~L Red-eye On/Off Off On On Beep Shoot w/o card • ~ Quality .L 15M 4752){316S £205l RAW 2 Select the image-recording quality" • To select a RAW setting, turn the < B > dial.
fii3m] Setting the Image-recording Quality Guide to Image-recording Quality Settings (Approx.) Pixels Printing Size Approx. 15.1 megapixels (15M) A3 or larger Approx.8.0 megapixels (8M) A3 - A4 Approx.3.7 megapixels (3.7M) A4 or smaller Iim!lJ Approx. 15.1 megapixels (15M) S~1 S~2 Quality .L .ilL File Size Possible Maximum (MB) Shots Burst 5.0 370 60 (90) 2.5 740 150 (740) 3.0 620 110 (620) 1.6 1190 390 (1190) 1.7 1090 330 (1090) 0.9 2040 1050 (2040) A3 or larger 20.
mm Setting the Image-recording Quality About RAW The RAW image is the data output by the image sensor and converted to digital data which is recorded on the card as is. You can select it from among 1mWl, SImWl 1, or SImWl 2. "RAW" written in the text will refer to all three RAW settings: 1mWl, SImWl 1, and SImWl 2. With RAW images, you can use the provided software to make various adjustments as needed.
Imm.I Setting the Image-recording Quality o • The maximum burst is displayed even when a card is not in the camera. Make sure that a card is loaded before taking a picture. • The maximum burst for is displayed regardless of the drive mode setting . • If [.g,C.Fn II -2: High ISO speed noise reduction] is set to [2: Strong], the maximum burst will be reduced (p.176). [I] If the viewfinder displays "99" for the maximum burst, it means the maximum burst is 99 or higher.
ISO: Setting the ISO Speed * ISO Speed Guide 'i ' ·:'i·'.··.· Shooting Situation (No flash) ISO Speed ·':ii,:.· . 100 - 200 Sunny outdoors 400 - 800 Overcast skies, evening 1600 - 3200, H1, H2 Dark indoors or night Flash Range The higher the ISO speed, the farther the flash range will be (p.108). () • If [.Q,C.Fn II -3: Highlight tone priority] is set to [1: Enable], the settable ISO speed range will be ISO 200 - 3200 (p.177).
3:~ Selecting a Picture Style *: By selecting a Picture Style, you can obtain the image effects matching your photographic expression or the subject. In the Basic Zone modes (except for @)), you cannot select the Picture Style. [~1\\11 \1.\ I I Picture Style o Portrait 2,() O. button. • When the camera is ready to shoot, press the < ~:~ > button . .. The Picture Style screen will appear. Select a Picture Style.
3:.. Selecting a Picture Style 11: I?;~NJ Neutral This Picture Style is for users who prefer to process images with their personal computer. For natural colors and subdued images. I?;~FI Faithful This Picture Style is for users who prefer to process images with their personal computer. When the subject is captured under a color temperature of 5200K, the color is adjusted colorimetrically to match the subject's color. The image is dull and subdued.
~:~ Customizing a Picture Style * You can customize a Picture Style by adjusting individual parameters like [Sharpness] and [Contrast]. To see the resulting effects, take test shots. To customize [Monochrome], see the next page. 1 Press the < ¢:~ > button. Picture Style o Portrait 2, () 0, Q~ 0, () 0 fi:~sJ ~ ~~q ~:~I I;>:~tl ~~~~ - 'lID[!) Detail 2 set Select a Picture Style. • Turn the < ?~ > or < 0 > dial to select a Picture Style, then press the < INFO, > button. Select a parameter.
.;::. Customizing a Picture Style * I3l • By selecting [Default set.] in step 3, you can revert the respective Picture Style to its defaulf parameter settings. , • To shoot with the Picture Style you modified, follow step 2 ontMe preceding page to select the modified Picture Style and then shoot Monochrome Adjustment For Monochrome, you can also set [Filter effect] and [Toning effect] in addition to [Sharpness] and [Contrast] explained on the preceding page.
~::, Registering a Picture Style * You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. You can create Picture Styles whose parameter settings such as for sharpness and contrast are different. You can also adjust the parameters of a Picture Style which has been registered to the camera with the provided software. 1 Press the < Select [User Def.]. Picture Style User Def.
.;:~ Registering a Picture Style * 6 Set the parameter. • Turn the < 0 > dial to adjust the parameter as desired, then press <@>. For details, see "Customizing the Picture Style" on pages 67-68. Picture Style User Oef. 1 6.() O.Jb o ~.~~~sl 1,,:.pl landscape a.V 0 ~<~:'LI f~:'NI [!:.~ l-rJ;~! ~ r:Dl mI8 Detail set o Eil 70 ~'~'fl • Press the < MEN U> button to register the new Picture Style. The Picture Style selection screen will then reappear. ..
WB : Setting the White Balance *: White balance (WB) is for making the white areas look white. Nornlally, the < m!lm > (Auto) setting will obtain the correct white balance. If naturallooking colors cannot be obtained with < m!lm >, you can select the white balance for each light source or set it manually by shooting a white object. In the Basic Zone modes, will be set automatically. Press the <~·WB> button. (06) Select the white balance. • While looking at the LCD panel, turn the <0> dial.
WB: Setting the White Balance 1< t:::".-.,d Custom White Balance Custom white balance enables you to manually set the white balance for a specific light source for better accuracy. Do this procedure under the actual light source to be used. 1 Photograph a white object. • The plain, white object should fill the spot metering circle. • Focus manually and set the standard exposure for the white object. • You can set any white balance. o o Spot metering circle 2 Select [Custom WB].
WB: Setting the White Balance * o • If the exposure obtained in step 1 is way off, a correct white balance might not be obtained. • If the image was captured while the Picture Style was set to [Monochrome] (p.66), it cannot be selected in step 3. [iJ • Instead of a white object, an 18% gray card (commercially available) can produce a more accurate white balance. • The personal white balance registered with the provided software will be registered under < 1:::l..• .-=:1 >.
fill3m] White Balance Correction "* You can correct the white balance that has been set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. This is for advanced users who are familiar with using color temperature conversion or color compensating filters. White Balance Correction 1 Select [WB SHIFT/BKT]. • Under the [01:] tab, select [WB SHIFT/BKT], then press <@>.
~ White Balance Correction * White Balance Auto Bracketing With just one shot, three images having a different color tone can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias or magenta/green bias. This is called white balance bracketing (WB-BKT). White balance bracketing is possible up to ±3 levels in single-level increments. Set the white balance bracketing amount.
IlimJ!J Lens Peripheral Illumination Correction _ Due to the lens characteristics, the four corners of the picture might look darker. This is called lens light fall-off or drops in peripheral illumination. This can be corrected. For JPEG images, lens light fall-off is corrected when the image is captured. For RAW images, it can be corrected with Digital Photo Professional (provided software). 1 Select [Peripheral illumin. correct.].
Ii!iI3ml Lens Peripheral Illumination Correction About the Lens Correction Data The camera already contains lens peripheral light correction data for about 20 lenses. In step 2, if you select [Enable], the peripheral light correction will be applied automatically for any lens whose correction data has been registered in the camera. With the EOS Utility (provided software), you can check which lenses have their correction data registered in the camera.
~ Creating and Selecting a Folder You can freely create and select the folder where the captured images are to be saved. This is optional since a folder will be created automatically for saving captured images. Create a Folder 1 Select [Select folder]. Auto power off 1 min. Auto rotate OnOl!!. Format File numbering Continuous Select falder-------·-·------·-- Under the [~.] tab, select [Select folder], then press < @ >. Select [Create folder].
rmmJ Creating and Selecting a Folder Selecting a Folder Lowest file number Quantity of images in folder rw Select folder 100CANm. IOlCANOj\ 102CANO~ 103CANOj\ 104CANm 10SCAi\;Oi' Crea~e folder .... 525 _T~l· 236 56 211 7 5 • ~I • With the Select folder screen displayed, turn the < 0 > dial to select the desired folder, then press < @ >. ~ The folder where the captured images will be saved will be selected. Subsequent captured images will be recorded into the selected folder.
Ii3ml File Numbering Methods The file number is like the frame number on a roll of film. The captured images are assigned a sequential file number from 0001 to 9999 and saved in one folder. You can change how the file number is assigned. The file number will appear on a personal computer in this format: IMG 0001.JPG. 1 Select [File numbering]. • Under the [""] tab, select [File numbering], then press <@>. 2 Select the file numbering method.
Ii!il3mI File Numbering Methods Auto Reset The file numbering restarts from 0001 each time the card is replaced or a new folder is created. Whenever the card is replaced or a new folder created, the file numbering starts from 0001. This is convenient if you want to organize images according to cards or folders.
Ii!i§m] Setting the Color Space '* The color space refers to the range of reproducible colors. With this camera, you can set the color space for captured images to sRGB or Adobe RGB. For normal shooting, sRGB is recommended. In the Basic Zone modes, sRGB is set automatically. 1 Select [Color space] . • Under the [01:] tab, select [Color space], then press <@>. 2 Set the desired color space. • Select [sRGB] or [Adobe RGB], then press <@>.
Setting the AF and Drive Modes The viewfinder has 9 AF points. By selecting a suitable AF point, you can shoot with autofocus while framing the subject as desired. You can also select the AF mode and drive mode best matching the shooting conditions and subject. * • The icon on the right of the page title indicates that the respective feature is available only in the Creative Zone modes (P, Tv, Av, M, A-DEP).
AF: Selecting the AF Mode * Select the AF mode suiting the shooting conditions or subject. In the Basic Zone modes, the optimum AF mode is set automatically. 1 On the lens, set the focus mode switch to . Set the Mode Dial to a Creative Zone mode. Press the < AF •DRIVE> button. (06) One-Shot AF for Still Subjects Suited for still subjects. When you press the shutter button halfway, the camera will focus only once. <.
AF: ~ .. : • .. ~ _ . . • .. I ~ •".' . ... F.:.... ~ , ; _ -, ~ Selecting the AF Mode '* .. : ' -" . [i] • If focus cannot be ,achieved, the focus confirmation light in the viewfinder will blink. If this occurs, a picture cannot be taken even if the shutter button is pressed completely. Recompose the picture and try to focus again. Or see "When Autofocus Fails" (p.88). • If the [Ct· Beep] menu is set to [Off], the beeper will not sound when focus is achieved.
tB Selecting the AF Point * Select one of the nine AF points to autofocus. In the Basic Zone and < A-DEP > modes, automatic AF point selection will take effect automatically. You cannot select the AF point. Press the < B:l> button. (06) ~ The selected AF point will be displayed in the viewfinder and on the LCD panel. • When all AF points light up, automatic AF point selection will be set. 2 Select the AF poi nt. • To select an AF point, you can either turn the or <0> dial or use < :-;~ > "" .
m Selecting the AF Point * []] • When looking at the LCD panel to selectthe AF point, note the following: Automatic selection [ - : center [ right [ - J ' top [ J • If focus cannot be achieved with the external, EOS-dedicated Speedlite's AF-assist beam, select the center AF point. =:-J 1 J I AF-Assist Beam with the Built-in Flash Under low-light conditions, when you press the shutter button halfway, the built-in flash fires a brief burst of flashes.
When Autofocus Fails Autofocus can fail to achieve focus (the focus confirmation light blinks) with certain subjects such as the following: <. > Subjects difficult to focus • Low-contrast subjects (Example: Blue sky, solid-color walls, etc.) • Subjects in low light • Extremely backlit or reflective subjects (Example: Car with a reflective body, etc.) • Near and far subjects covered by an AF point (Example: Animal in a cage, etc.
~ Selecting the Drive Mode * Single and continuous drive modes are provided. In the Basic Zone modes, the optimum drive mode is set automatically. Press the < AF •DRIVE> button. (06) Select the drive mode. • While looking at the LCD panel, turn the < 0 > dial. o Single shooting When you press the shutter button completely, one shot will be taken. ~H: High-speed continuous shooting (Max. 6.3 shots per sec.) ~ : Low-speed continuous shooting (Max. 3 shots per sec.
~ Self-timer Operation Use the self-timer when you want to be in the picture. The < & > (10 sec. timer) can be used in all shooting modes. Press the < AF •DRIVE> button. (06) Select the self-timer. • Look at the LCD panel and turn the <0> dial. [ [ ) & : 1a-sec. self-timer J &2 : 2-sec. self-timer '* - 3 Take the picture. ~ ONE SHOT • ~ [i] • Focus the subject and press the shutter button completely.
Advanced Operations . -- With the Creative Zone modes, you can set the desired shutter speed or aperture to obtain the result you want. You take control of the camera . "* • The icon on the right of the page title indicates that the respective feature is available only in the Creative Zone modes (P, Tv, Av, M, A-DEP). • After you press the shutter button halfway and let go, the LCD panel and viewfinder information will remain displayed for about 4 sec. (04 ).
P: Program AE The camera automatically sets the shutter speed and aperture to suit the subject's brightness. This is called Program AE. *
stands for Program. * AE stands for Auto Exposure. Set the Mode Dial to
. Focus the subject. • Look through the viewfinder and aim the selected AF point over the subject. Then press the shutter button halfway.
P: Program AE • 7 ~ aJ I ~ I t. • If the "30"" shutter speed and the maximum aperture blink, it indicates underexposure. Increase the ISO speed or use flash. If the "8000" shutter speed and the minimum aperture blink, it indicates overexposure. Lower the ISO speed or use an NO filter (sold separately) to reduce the amount of light entering the lens.
Tv : Shutter-Priority AE In this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the correct exposure matching the brightness of the subject. This is called shutter-priority AE. A faster shutter speed can freeze the action or moving subject. Or a slower shutter speed can create a blurred effect, giving the impression of motion. * < Tv> stands for Time value. Frozen action (Fast shutter speed) Blurred motion (Slow shutter speed) 1 Set the Mode Dial to .
Tv: Shutter-Priority AE • If the maximum aperture blinks, it indicates underexposure. Turn the <8> dial to set a slower shutter speed until the aperture stops blinking or set a higher ISO speed. • If the minimum aperture blinks, it indicates overexpos ure. Turn the < Ed > dial to set a faster shutter speed until the aperture stops blinking or set a lower ISO speed. []] Shutter Speed Display The shutter speeds from "8000" to "4" indicate the denominator of the fractional shutter speed. For example.
Av: Aperture-Priority AE ..... • '.. ••• _'_ " ,. l. •• - . . ' In this mode, you set the desired aperture and the camera sets the shutter speed automatically to obtain the correct exposure suiting the subject brightness. This is called aperture-priority AE. A higher f/number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus.
Av: Aperture-Priority AE ~- - ~ =-,1'1'=' I ~_IU ~ I I ~It. .-. .-. ,-,.-, u...l, C? I) '-' U '_I~I 71~ [j • If the "30"" shutter speed blinks. it indicates underexposure. Turn the dial to set a larger aperture (smaller f/number) until the blinking stops or set a higher ISO speed. • If the "8000" shutter speed blinks, it indicates overexposu re. Turn the < E& > dial to set a smaller aperture (larger f/number) until the blinking stops or set a lower ISO speed.
M: Manual Exposure In this mode, you set both the shutter speed and aperture as desired. To determine the exposure, refer to the exposure level indicator in the viewfinder or use a commercially-available handheld exposure meter. This method is called manual exposure. * < M > stands for Manual. 1 Set the Mode Dial to . ~ 200 (. L 6.3[2D5J )[s] ONE SHOT @~.'" -2••1••' ••1.:2 Iso ,nn I 2 • To set the shutter speed, turn the dial. • To set the aperture, set the power switch to <....
A-DEP: Automatic Depth-of-Field AE Objects in the foreground and background will be in focus automatically. All the AF points will function to detect the subject, and the aperture required to attain the necessary depth of field will be set automatically. * < A-DEP > stands for Auto-Depth of field. This mode sets the depth of field automatically. '11 Set the Mode Dial to < A-DEP >. I I ! ._-----~ 2 Focus the subject. 3 Take the picture.
[s] Selecting the Metering Mode * The metering mode is the method of measuring the brightness of the subject. In the Basic Zone modes, evaluative metering is set automatically. ~ 1 Press the button. (06) Select the metering mode. • While looking at the LCD panel, turn the dial. -:- ---'----, [$J Evaluative metering This is an all-around metering mode suited for portraits and even backlit subjects. The camera sets the exposure automatically to suit the scene. ., ...
Setting Exposure Compensation * Exposure compensation is used to alter the standard exposure set by the camera. You can make the image look brighter (increased exposure) or darker (decreased exposure). You can set the exposure compensation up to ±2 stops in 1/3-stop increments. 1 Turn the Mode Dial to any Creative Zone mode except . 2 Check the exposure level indicator. • Increased exposure for a brighter image l{!!r~ -2••1•• -I)) .1. 2lso,nn 'uu 3 Set the exposure compensation amount.
(m:mJ Auto Exposure Bracketing (AEB) * By changing the shutter speed or aperture automatically, the camera brackets the exposure up to ±2 stops in 1/3-stop increments for three successive shots. This is called AEB. 1 Select [Expo. comp./AEB]. • 2 Exposure comp./ AEB setting Darker Brighter -4 •• 3••2•• 1••~ •• 1••2•• 3.:4 lB t!D I I @ I '" tiDOl< AEB amount r.:.wm .Jeu :J:J n (. L GJf:UJ n CJ ] [~~ ONE SHOT @r~.Il) 1..;..1.:2 -2•• lso Jaa ~ 0 Under the [01:] tab, select [Expo.
* AE Lock* Use AE lock when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure setting. Press the <*> button to lock the exposure, then recompose and take the shot. This is called AE lock. It is effective for backlit subjects. 1 Focus the subject. • Press the shutter button halfway. .. The exposure setting will be displayed. Press the <*> button.
Bulb Exposures When bulb is set, the shutter stays open while you hold down the shutter button completely, and closes when you let go of the shutter button. This is called bulb exposure. Use bulb exposures for night scenes, fireworks, the heavens, and other subjects requiring long exposures. Set the Mode Dial to . Set the shutter speed to "bulb." I(!!rj] -II) • While looking at the LCD panel, turn the < B > dial to select "bulb." • The next setting after "30" " is "bulb.
Bulb Exposures Using the Eyepiece Cover If you take a picture without looking at the viewfinder, light entering the eyepiece can throw off the exposure. To prevent this, use the eyepiece cover (p.23) attached to the camera strap. 1 Remove the eyecup. • Push the bottom of the eyecup upward. Attach ing the eyepiece cover. • Slide the eyepiece cover down into the eyepiece groove to attach it.
Mirror Lockup * Although using the self-timer or Remote Switch can prevent camera shake, using mirror lockup to prevent camera vibrations can also help when you use a super telephoto lens or shoot close ups. When [,Q,C.Fn III -6: Mirror lockup] is set to [1: Enable] (p.180), shooting with mirror lockup will be possible. 1 Focus the subject, press the shutter button completely and release it. .. The mirror will swing up. 2 Press the shutter button completely again . ..
Using the Built-in Flash E-TTL II autoflash obtains high-precision and consistent flash shots. Using the Built-in Flash in the Basic Zone If necessary, the built-in flash will pop-up automatically in low-light or backlit conditions. (except in <> > <~> modes) Using the Built-in Flash in the Creative Zone Regardless of the light level, you can press the < ~ > button to pop-up and fire the built-in flash whenever desired. If the built-in flash has popped up, you can push it back down with your fingers.
Using the Built-in Flash Effective Range of Built-in Flash Aperture [Approx. meters/feet] ISO Speed 400 1600 100 200 800 f/3.5 3.7/12.1 5.3/17.4 7.4/24.3 10.5/34.4 14.9/48.9 21.0/68.9 29.7 /97.4 42.0/137.8 f/4 3.3/10.8 4.6/15.1 6.5/21.3 9.2/30.2 13.0/42.7 18.4/60.4 26.0/85.3 36.8/120.7 -f/5.6 2.3/7.5 3.3/10.8 4.6/15.1 6.6/21.7 18.6/61.0 26.3/86.3 9.3 f 30.5 3200 13.1/43.0 Hi: 6400 H2:12800 [i] • For close subjects, the subject should be at least 1 meter/3.
Using the Built-in Flash mt· Flash Exposure Compensation "* In the same way as normal exposure compensation, you can set exposure compensation for ftash. You can set flash exposure compensation up to ±2 stops in 1/3-stop increments. I Increased exposure J~ J -2••1.•' •• ~.:2ISolaa t-----/ Decreased exposure l----/J ~ J -2•• ~ ••' ••1.:2IS0:aa 1 Press the < ISO·~ > button. (06) 2 Set the exposure compensation amount. • While looking at the LCD panel or viewfinder, turn the < 0 > dial.
Using the Built-in Flash * FE Lock*' FE (flash exposure) lock obtains and locks the correct flash exposure reading for any part of a subject. 1 Press the < ~ > button to pop-up the built-in flash. • Press the shutter button halfway and look in the viewfinder to check that the < ~ > icon is lit. en c-'.'-'c -2..1 .....1.:2150 I L ., UU Inn "_"_, en _"_, Focus the subject. Press the < * > button.
IE3mJ Flash Control * The built-in flash and an external Speedlite can also be set with the menu. The menu for the external Speed lite will be applicable only to EX-series Speedlites whose functions can be set with the camera. Select [Flash control]. INFO. button Normal disp. Flastlcontrol-----·--Camera user setting Clear settings Firmware Ver. 1.0.0 ---- • Under the [~:] tab, select [Flash control], then press < § >. ~ The flash control screen will appear. About [Flash firing] Flash control Flc!~.
Ii!iI3ml Flash Control '* • E-TTL II For normal flash exposures, set it to [Evaluative]. If [Average] is set, the flash exposure will be averaged for the entire metered scene as with an external metering flash. Flash exposure compensation may be necessary depending on the scene, so this setting is for advanced users. Setting an External Speedlite Select either [External flash func. setting] or [External flash C.Fn setting].
External Speed lites EOS-dedlcated,EX"series SpeedHtes Basically operates like a built-in flash for easy operation. When an EX-series Speed lite is attached to the camera, almost all the autoflash control is done by the camera. In other words, it is like a highoutput flash attached externally in place of the built-in flash. For detailed instructions, see the EX-series Speedlite's instruction manual. This camera is a Type-A camera that can use all the features of EX-series Speedlites. ~.r .· . ..
External Speedlites Using Non-Canon Flash Units Sync Speed The camera can synchronize with non-Canon compact flash units at 1/250 sec. and slower speeds. With large studio flash units, since the flash duration is longer, set the sync speed within 1/60 sec. to 1/30 sec. Be sure to test the flash synchronization before shooting. PC Terminal The camera's PC terminal can be used with flash units having a sync cord. The PC terminal is threaded to prevent inadvertent disconnection.
Live View Shooting You can shoot while viewing the picture on the camera's LCD monitor. This is called "Live View shooting." Live View shooting is effective for still subjects which do not move. If you handhold the camera and shoot while viewing the LCD monitor, camera shake can cause blurred images. Using a tripod is recommended.
Preparing for Live View Shooting '* Set the camera for Live View shooting. 1 Set the shooting mode. • Set the shooting mode to a Creative Zone mode. • Live View shooting does not work in Basic Zone modes. 2 Select [Live View fu nction settings]. • Under the [~:] tab, select [Live View function settings], then press <@>. 3 Select [Live View shoot.]. • Turn the < 0 > dial to select [Live View shoot.], then press <@>. • Turn the < 0 > dial to select [Enable], then press < @ >.
Preparing for Live View Shooting *: Display the Live View image. • Press the < 13 > button. ~ The Live View image will appear on the LCD monitor. • Press the < 13 > button again to turn off the LCD monitor and return to normal shooting. About [Exposure simulation] Exposure simulation displays and simulates how the brightness of the actual image will look.
Shooting*" 1 Use AF to focus. • Press the < AF-ON > button. ~ The camera will focus with the current AF mode (p.121). ~~i/~~~2 t--~~/~~ ~;-_:/~ ·. - •.• • • .• • •.• •' • • •.• • • .• • •.• • • • •.• • }... ,;...;.~-", ", ' ' \ ." _ _ -_._.- j I . Take the picture. • Press the shutter button completely. ... The picture will be taken and the captured image is displayed on the LCD monitor. .. After the image review ends, the camera will return to Live View shooting automatically.
Shooting * • Pressing the < MENU> button will display the menu screen so you can set nlenu functions. Press the < MEN U> button again to return to the Live View image. If you select [01: Dust Delete Data], [~: Sensor cleaning], [~: Clear settings], or [~: Firmware Ver.], the Live View shooting will be terminated. Battery Life with Live View Shooting [Approx. number of shots] ·····shooilllg···col1d.tions Temperature No Flash 50% Flash Use At 23°C / 73°F 180 170 At O°C 132°F 140 130 "."." ...
Shooting * About thelnformati.Qn•• Oisplay • Each time you press the < INFO. > button, the information display will change. Histogram AF point (Quick mode) Live View exposure simulation--__---., Picture Style -'-' AF mode·l.. -- Magnifying frame Drive mode'-" White balance···_·~~:r AEB FEB Flash-ready Image-recording quality-Shutter speed --.. -. Aperture -Exposure level----, AEB range Flash exposure compensation""--' ·AE lock Battery check L_.._Highlight tone priority I L._.
Using AF to Focus * Selectingtbe AF Mode Three AF modes are provided: [Quick mode], [Live mode] (p.123), and [Live ~ mode] (face detection) (p.124). If you want to achieve precise focusing, magnify the image and focus manually (p.127). Select the AF mode. live View function settings Under [~: Live View function settings], select [AF mode]. • While the Live View image is displayed, if you press the < AF· DRIVE> button, you can also select the AF mode with the <£CS3> dial. • • QUlc.
Using AF to Focus * 2 Select the AF point. • Press the < AF •DRIVE> button, then use < ~f: > to select the AF point. If you keep tilting < ~f: > in the same direction, it will toggle between manual and automatic AF point selection. 3 Focus the subject. • Aim the AF point over the subject, and hold down the < AF-ON > button. • The Live View image will turn off, the reflex mirror will go back down, and AF will be executed . ..
Using AF to Focus * - . . . . 1 • .. • - - • Live Mode The image sensor is used to focus. Although AF is possible with the Live View image displayed, the AF operation will take longer than with Quick mode. Also, achieving focus may be more difficult than with Quick mode. 1 Display the Live View image. -=- • Press the < > button . ... The Live View image will appear on the LCD monitor. • The AF point <0> will appear.
Using AF to Focus * Livej; (Face Detection) Mode With the same AF method as with the Live mode, the human face is detected and focused. Have the person face the camera. 1 Display the Live View image. • Press the < 1:1 > button . .. The Live View image will appear on the LCD monitor. > frame • When a face is detected, the will appear over the face to be focused. • If multiple faces are detected, > will be displayed. Use the < '~f; > to move the <.: :. > frame over the target face. <: : <.: :.
Using AF to Focus * • ··ThefaC¢+detec;ti.o~ • • AF•• ·.p().i.nt·•.• n1ig~~ . • •cove.r•• •ooIY•• • P<3.rt.·.. o f••·the•.• face•. • An object other than/a human face might· be. detected as aface. • Facedeteetion will not work if the faeeis very smaIf or large in the picture,toobrighlor .toodark. titl~cf hod~ofltallyordiagQnaUYjorpartially hidden. When you press < ~~:>straightdown,it will switch to the live mode (p.123). You can tilt the < ";~2 >to switch to another AFpoint.
Using AF to Focus"* Shooting conditions which can make focusing difficult: • Low-contrast subjects such as the blue sky and solid-color surfaces. • Subjects in low light. • Stripes and other patterns where there is contrast only in the horizontal direction. • Under a light source whose brightness, color, or pattern keeps changing. • Night scenes or points of light. • Under fluorescent lighting or when the image flickers. • Extremely small subjects. • Subjects strongly reflecting light.
Focusing Manually * Magnify the image and focus manually. Set the lens focus mode switch to . • Turn the lens focusing ring to focus roughly. Move the magnifying frame to the position where you want to focus. • Use < ~f; > to move the magnifying frame. • If you press < ~f~4 > straight down, it will return to the image center. Magnifying frame Magnify the image. • Press the < ~ > button . ... The image within the magnifying frame will be magnified.
Silent Shooting * Instructions for setting the [~: Live View function settings] menu's [Silent shoot.] are explained below. • Mode 1 The shooting operation noise is quieter than the normal shooting. Continuous shooting is also possible. High-speed continuous shooting will be approx. 5.8 fps. • Mode 2 When you press the shutter button completely, only one shot will be taken. While you keep holding down the shutter button, the camera operation will be suspended.
-- Notes about the Live View image • Under low light or bright light conditions, the Live View image might not reflect the brightness of the captured image. • If thelightsource within the image changes, the screen might flicker. If this happens, stop and resume the Live View shooting under the actual light source to be used. • If you point the camera in a different direction, it might throw off the Live View image's correct brightness momentarily. Wait until the brightness level stabilizes before shooting..
o Notes about Custom Functions Live View shooting will disable some Custom Function settings (p.173). • If [,Q,C.Fn II -4: Auto Lighting Optimizer] (p.177) is not set to [3: Disable], the image will look bright even if a decreased exposure compensation has been set. @ Notes about lenses and flash • The focus preset feature on super telephoto lenses cannot be used. • FE lock is not possible when the built-in flash or external Speedlite is used. Modeling flash is not possible when external Speedlite is used.
Image Playback This chapter explains how to playback and erase images, how to display images on a TV screen, and other playback-related functions. About images taken with another camera: The camera might not be able to properly display images captured with a different camera or edited with a personal computer or whose file name was changed.
[E] Image Playback Single Image Display 1 Playback the image. • Press the < ~ > button. ~ The last captured image or last image viewed will appear. Select the image. .. _ _.. _._ ..•.. ..: _".;. ; .. :_: :,:,.: • To playback images starting with the last image, turn the < 0> dial counterclockwise. To playback images starting with the first captured image, turn the dial clockwise . • Press the < INFO. > button to change the display format. .:....:_ .. :.. :.
lB Image Playback INFO. Shooting Information Display Protect .._-- r- AF Microadjustment 1 Exposure compensation amount············, Folder number - File number I l Flash exposure! i-Card compensation amount ! I I Aperture Shutter speed ._. I : , I ~ '-,- I ' II Cl -~~Histogram I (Brightness!RGB) Metering mode. ·····ISO speed Shooting mode ..... Highlight tone priority Picture Style and settings Color temperature if <13> is set . . . Color space ....
[B Image Playback • About the Histogram The brightness histogram display shows the exposure level distribution and overall brightness. And the RGB histogram display is for checking the color saturation and gradation. The display can be switched with the [:EI: Histogram] menu. [Brightness] Display Sample Histograms This histogram is a graph showing the distribution of the image's brightness level.
~ Searching for Images Quickly ~ Display Multiple Images on One Screen (Index display) Search for images quickly with the index display showing four or nine Images on one screen. Turn on the index display. • During image playback, press the <~.~> button. ~ The 4-image index display will appear. The currently-selected image will be highlighted in a blue frame. • Press the < ~.~ > button again to switch to the 9-image index display. 1/125 8.0 100-0003 {(£) . .. ·~·~~ a i----... . .·a-01':.' ... ~ ..
[E] Searching for Images Quickly rim. Jump through Ima.ges(Jump.. display) With the single image display, index display, and magnified view, you can turn the < ~ > dial to jump through the images. 1 Select the jump method. . ~ Highlight alert AF point dlsp Histogram e With the [:EI: Image jump w/~] menu's [1 image/10 images/100 images/Screen/Date/Folder] option, you can set the desired jump method. • With the index display, you can jump by a single screen by selecting [Screen].
~/~ Magnified View You can magnify the image by 1.5x to 10x on the LCD monitor. 1 Magnify the image. Magnified area position • During image playback, press the <~> button . .. The image will be nlagnified. • To increase the magnification, hold down the < ~ > button. The image will continue to be magnified until it reaches the maximum magnification. • Press the < ~.~ > button to reduce the magnification. If you hold down the button, the image will continue to reduce to the single image display.
Rotating the Image IgJ You can rotate the image to the desired orientation. 1 Select [Rotate]. • Under the [Er] tab, select [Rotate], then press < @ >. Select the image. • Turn the < 0 > dial to select the image to be rotated. • You can also select an image on the index display. 3 Rotate the image. • Each time you press < @ >, the image will rotate clockwise as follows: 90° ~ 270° ~ 0° • To rotate another image, repeat steps 2 and 3. • To exit and return to the menu, press the
button.mrml Auto Playback (Slide Show) You can playback the images in the card as an automatic slide show. 1 Select [Slide show]. • Highlight alert AF point disp. Histogram Slide show Image jump wI,... Disable Disable Brightness • Under the [EJ=] tab, select [Slide show], then press < @ >. .... The slide show setting screen appears. 10 images Quantity of images for playback 2 Select the images to be played back. • Turn the < 0 > dial to select the item, then press < @ > .
li!iI3ml Auto Playback (Slide Show) 3 Set the Play time and Repeat options. • Turn the < 0 > dial to select [Set up], then press <@>. • Set the [Play time] and [Repeat] options, then press the
button. [Play time] 4 [Repeat] Start the slide show. • Turn the < 0 > dial to select [Start], then press < @ > • After [Loading image...] is displayed for a few seconds, the slide show will start. • To pause the slide show, press < @ >. • During pause, [II ] will be displayed on the upper left of the image.Viewing the Images on TV You can also view the images on a TV set. Turn off the camera and the television before connecting them. * Depending on the TV monitor, part of the image might be cut off. Viewing on Non-HD (Hi-Definition) TV Sets 1 Connect the provided video cable to the camera. • Connect the video cable to the camera's
Viewing the Images on TV Viewing on HD (Hi..Definition) TV Sets The HOMI Cable HTC-100 (sold separately) is required. 1 Connect the HDMI cable to the camera. • Connect the HOMI cable to the camera's < HDMI OUT> terminal. • With the plug's < ... HDMI MINI> logo facing the front of the camera, insert it into the camera's terminal. Connect the HDMI cable to the TV set. • Connect the HOM I cable to the TV's HOMI IN port.
~ Protecting Images Protecting the image prevents it from being erased accidentally. 1 Select [Protect images]. Under the [Er] tab, select [Protect images], then press <@>. .. The protect setting screen will appear. • Image protect icon 2 Select the image and protect it. • Turn the < 0 > dial to select the image to be protected, then press <@>. .. When an image is protected, the icon will appear on the screen. • To cancel the image protection, press <@> again. The <~> icon will disappear.
illJ Erasing Images You can either select and erase images one by one or erase them in one batch. Protected images (p.143) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect it. o Erasing a Single Image Playback the image to be erased. Press the < ITD > button. • The erase menu will appear at the bottom of the screen. ·3 Erase the image. ..
Changing Image Playback Settings lIBmJ Adjusting the LCD Monitor Brightness You can adjust the brightness of the LCD monitor to make it easier to read. ... ] LCD brightness Date/Time Language Video system .. ~.:~:. 1 Select [LCD brightness]. • Under the [~:] tab, select [LCD brightness], then press <@>. 08/241'08 13: 10 English NTSC 2 Adjust the brightness. • While referring to the gray chart, turn the <0> dial, then press <@>. • You can also display the [LCD brightness] screen with the < FUNC.
Changing Image Playback Settings (i![iI!J Auto Rotate of Vertical Images Vertical images are rotated automatically so they are displayed vertically on the camera's LCD monitor and personal computer instead of horizontally. The setting of this feature can be changed. 1 Select [Auto rotate] . • Under the [~.] tab, select·[Auto rotate], then press <@>. 2 Set the auto rotate. • Turn the < 0 > dial to select the setting, then press < @ >. • OnO.
Sensor Cleaning The camera has a Self Cleaning Sensor Unit attached to the image sensor's front layer (low-pass filter) to shake off dust automatically. The Dust Delete Data can also be appended to the image so that the dust spots remaining can be erased automatically by Digital Photo Professional (provided software). Minimizing Dust • When changing lenses, do it in a place with minimal dust. • When storing the camera without a lens attached, be sure to attach the body cap to the camera.
m3lI!l Automatic Sensor Cleaning Whenever you set the power switch to or , the Self Cleaning Sensor Unit operates to automatically shake off the dust on the front of the sensor. Normally, you need not be aware of this operation. However, you can execute the sensor cleaning at anytime as well as disable it. Cleaning the Sensor Now 1 Select [Sensor cleaning]. • Under the [~:] tab, select [Sensor cleaning], then press < @ >. LCD brightness., ~ .:. .
Ii!iI3HD Appending Dust Delete Data"* Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that might be visible on captured images. However, in case visible dust still remains, you can append the Dust Delete Data to the image to later erase the dust spots. The Dust Delete Data is used by Digital Photo Professional (provided software) to erase the dust spots automatically. Preparation • Get a solid-white object (paper, etc.). • Set the lens focal length to 50mm or longer.
Iii3ml Appending Dust Delete Data * 3 Photograph a solid-white object. o o • At a distance of 20 cm - 30 cm / 0.7 ft. 1.0 ft., fill the viewfinder with a patternless, solid-white object and take a picture. ~ The picture will be taken in the aperture-priority AE mode with an aperture of f/22. • Since the image will not be saved, the data can still be obtained even if there is no card in the camera . ... When the picture is taken, the camera will start obtaining the Dust Delete Data.
Il!LI3ml Manual Sensor Cleaning"* Dust which could not be removed by the automatic sensor cleaning can be removed manually with a blower, etc. The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. Before cleaning the sensor, detach the lens from the camera. 1 08/241'0813:l0 Language English Video system ~_ensQr cteani l19 • Under the [~:] tab, select [Sensor cleaning], then press <@>. ~.:.
ImmJ Manual Sensor Cleaning '* -- • Whil&cleaning.lhe sensor,.n~verdoany~f*hefoUo~iIlQ.Doingany of the following will cut9ffthe power and closE).the shutter. ThE) shutter curtains and image sensormlght get damaged. -Setting the power switch to . • Opening the battery compartment cover. • Opening the card slot cover. • The surface of the image sensor is extremely delicate. Clean the sensor with care. • Use a plain blower without any brush attached. A brush can scratch the sensor.
Printing Images and Transferring Images to aComputer • Printing (p.154) You can connect the camera directly to a printer and print out the images in the card. The camera is compatible with "r( PictBridge" which is the standard for direct printing. • Digital Print Order Format (DPOF) (p.163) DPOF (Digital Print Order Format) enables you to print images recorded in the card according to your printing instructions such as the image selection, quantity to print, etc.
Preparing to Print You do the direct printing procedure entirely with your camera while you look at the LCD monitor.' Connecting the Camera to a Printer Set the camera's power switch to . 2 Set up the printer. • For details, see the printer's instruction manual. Connect the camera to the printer. • Use the interface cable that came with the camera. • When connecting the cable plug to the camera's < ~ > terminal, the cable plug's < ~ > icon rnust face the front side of the camera.
Preparing to Print t( PictBridge 6 Playback the image. • Press the < [B > button. ~ The image will appear, and the < fI( > icon will appear on the upper left to indicate that the camera is connected to a printer. ... The < ddlltV' > button lamp will light in blue. -- • The camera cannot be used with printers compatible only with CP Direct or Bubble Jet Direct. • When connecting the camera to the printer, do not use any cable other than the interface cable provided.
t(Printing The screen display and setting options will differ depending on the printer. Some settings might not be available. For details, see the printer's instruction manual. Printer-connected icon 1 Select the image to be printed. • Check that the < t( > icon is displayed on the upper left of the LCD monitor. • Turn the < 0 > dial to select the image to be printed. 2 Print setting screen ,-.. -.- Press <@>. .. The print setting screen will appear. -Sets the printing effects (p.158).
f(Printing .CD Setting.thePaperSize • Select the size of the paper loaded in the printer, then press < @ >. ~ The paper type screen will appear. ~Setting the Paper Type • Select the type of the paper loaded in the printer, then press < @ >. • When using a Canon printer and Canon paper, read the printer's instruction manual to check what paper types can be used. ~ The page layout screen will appear. IlJ Setting the Page Layout • Select the page layout, then press <@>.
f(Printing 4 Item Set the printing effects. • Set as necessary. If you need not set any printing effects, go to step 5. • The screen display may differ depending on the printer. • Select the option on the upper right, then press < @ >. Select the desired printing effect, then press < @ >. • If the < § > icon is displayed next to < ImI!I >, you can also adjust the printing effect (p.160). Description ~On The image will be printed according to the printer's standard colors.
t( Printing 5 Set the date and file number imprinting. • Set as necessary. • Select <~>, then press <@>. • Set as desired, then press <@>. 6 Set the number of copies. • Set as necessary. • Select , then press <@>. • Set the number of copies, then press <@>. Start printing. • Select [Print], then press < @ >. The < ~iN' > button's blue lamp will blink and the printing will start. []] • With Easy printing, you can print another image with the same settings.
t(Printing ~ Adjustment of Printing Effects /' - "'"- . . . . - ~ ' O~Jatural M '. ~---~ ./, ~ ~ PrintEffect Brightness Adjust levels & Brightener Red-eye corr. : mII!J 1::..1 l JJJ 1 copies ONatural M • ~ Off Off Off In step 4 on page 158, select the printing effect. When the < ~ > icon is displayed next to < ImI!I >, press the < INFO. > button. You can then adjust the printing effect. What can be adjusted or what is displayed will depend on the selection made in step 4.
t{Printing Trimming the Image Tilt correction You can crop the image and print only the trimmed portion as if the image was recomposed. Do the trimming right before printing. If you set the trimming and then set the print settings, you may have to set the trimming again. 1 On the print setting screen, select [Trimming]. 2 Set the trimming frame size, position, and proportion. • The image area within the trimming frame will be printed.
f( Printing • Depending on the printer, the trimmed image area might not be printed as you specified. • The smaller you make the trimming frame, the grainier the picture will look on the pri nt. • While trimming the image, look at the camera's LCD monitor. If you look at the image on a TV screen, the trimming frame might not be displayed accurately. EiI Handling Printer Errors If you resolve a printer error (no ink, no paper, etc.
Digital Print Order Format (DPOF) You can set the print type, date imprinting, and file No. imprinting. The print settings will be applied to all print-ordered images. (They cannot be set individually for each image.) Setting the Pri nting Options 1 Select [Print order] . .. Under the [ET] tab, select [Print order], then press < @ >. [E] "'Print order o Standard o prints Select [Set up]. • Select [Set up], then press <@>. Off Off Date File No. Sel.lmage 2 By.
Digital Print Order Format (DPOF) ~ Print type Date File number Standard Prints one image on one sheet. e Index Multiple, thumbnail images are printed on one sheet. ~ ~ Both Prints both the standard and index prints. On Off On Off [On] imprints the recorded date on the print. [On] imprints the file No. on the print. 4 Exit the setting. • Press the
button . .. The print order screen will reappear. • Next, select [Sel.lmage], [By.], or [All image] to order the images to be printed.Digital Print Order Format (DPOF) Print Ordering • Sel.lmage Select and order images one by one. Press the < ~.~ > button to display the three-image view. To return to the singleimage display, press the < ~ > button. After completing the print order, press the
button to save the print order to the card. Quantity Total images selected Check mark Index icon [Standard] [Both] Press < § > and a print order for 1 copy of the displayed image will be placed.Direct Printing with DPOF I'Print order [dI o Standard mlndex Date File No. 7 prints 2 images On Off Sel.lmage By. All image Set up Print lmmJ~ 1 With a PictBridge printer, you can easily print images with DPOF. Preparing to print. • See page 154. Follow the "Connecting the Camera to a Printer" procedure up to step 5. 2 Under the [Er] tab, select [Print order]. 3 Select [Print]. • [Print] will be displayed only if the camera is connected to the printer and printing is possible.
~. Transferring Images to a Personal Computer _ By connecting the camera to a personal computer, you can transfer images from the camera's card by operating the camera. This feature is called direct image transfer. U Before connecting the camera to a personal computer, be sure to install the provided software (EOS DIGITAL Solution Disk on CD-ROM) in the personal computer. For instructions to install the provided software, see the separate sheet, CD-ROM Guide.
E+ Transferring Images to a Personal Computer o Shooting will be disabled while the direct transfer screen is displayed. [Q] • If the [EaS Utility] screen does not appear, see Software Instruction Manual in the CD-ROM . .. Before disconnecting the cable, turn off the camera. Pull outthe cable by grasping the plug (instead of the cord).
fE. Transferring Images to a Personal Computer Options other than [All Images] are explained below. To start the image transfer, press the < ~ltV > button. • New images Images which have not yet been transferred to the personal computer will be selected by the camera automatically and transferred. • Transfer order images You select the images and they are transferred to the personal computer in a batch. To select the images, see page 170.
~+ Transferring Images to a Personal Computer IliI3:m.l Selecting the Images to be Transferred Under the [Ef] tab, you can use [Transfer order] to select the images to be transferred to a personal computer. When you select [Transfer order images] on page 169, you can transfer the images set by the transfer order. • Sel.lmage Select and order images one by one. Press <@ > to include the displayed image in the transfer order. The > icon will also appear on the upper left.
Customizing the Camera With Custom Functions, you can change the camera functions according to your preference. Also, the current camera settings can be saved under the Mode Dial's < 00 > and < ~ > positions. The functions explained in this chapter apply to Creative Zone modes.
UilmD Setting Custom Functions *: ~ 1 Select [,g,], C. Fn I :Exposure • Turn the dial to select the [,g,] tab. n: C.Fn Image C. Fn ill :Autofocus/Drive C. Fn IV :Operation/Others Clear all Custom Func. (c. Fn) Custom Function No. 2 3 C.Fn I :Exposure Exposure level increments o 1/3-stop Select the group. • Turn the <0> dial to select C.Fn 1IV, then press < @ > . Select the Custom Function number. • Turn the < 0> dial to select the Custom Function No., then press 1.' 12·stOD <@>.
mm!J Custom Functions * C.Fn I: Exposure 1 Exposure level increments 2 3 4 ISO speed setting increments ISO expansion p.174 Bracketing auto cancel Bracketing sequence Safety shift 5 6 7 p.175 Flash sync. speed in Av mode C.Fn II: Image 1 2 3 Long exposure noise reduction High ISO speed noise reduction Highlight tone priority 4 Auto Lighting Optimizer p.176 p.177 C.Fn III: Autofocus/Drive 1 Lens drive when AF impossible Lens AF stop button function AF point selection method i2 .?i3 4 5 i .·.
Ii!iI3ml Custom Function Settings * C.Fn I: Exposure C.Fn I -1 Exposure level increments 0: 1/3-stop 1: 1/2-stop Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, etc. Effective when you prefer to control the exposure in less fine increments than 1/3-stop increments. [j The exposure level will be displayed in the viewfinder and on the LCD panel as shown below. C.Fn I -2 ISO speed setting increments 0: 1/3-stop 1: 1-stop C.
Ii!iI3ml Custom Function Settings *: • ' . "'.. •• ~ '"", C.Fn I -5 ;.- . . ; : .. ~ .. - • (: - l "'... • • ~ • : • • 1. ~ .• ~ .';' ~. -- . - ":" \io ~... • • Bracketing sequence The AEB shooting sequence and white balance bracketing sequence can be changed. 0: 0, -, + 1: -,0,+ AEB . < .:.. .... . .. ... .. ..WBBr~cketing :... . . .: o: Standard exposure o: Standard white balance - : Decreased exposure - : More blue + : Increased exposure + : More amber C.
Ii3:ml Custom Function Settings *: C.Fn II: Image C.Fn II -1 Long exposure noise reduction 0: Off 1: Auto For 1 sec. or longer exposures, noise reduction is performed automatically if noise typical of long exposures is detected. This [Auto] setting is effective in most cases. 2: On Noise reduction is performed for all exposures of 1 sec. or longer. The [On] setting may be effective for noise that cannot be detected or reduced with the [Auto] setting.
~ Custom Function Settings C.Fn II -3 *' Highlight tone priority 0: Disable 1: Enable Improves the highlight detail. The dynamic range is expanded from the standard 18% gray to bright highlights. The gradation between the grays and highlights becomes smoother. o Eil With setting 1, noise in the shadow areas may be slightly more than usual. With setting 1, the settable ISO speed range will be 200 - 3200. Also, <0+> (dynamic range) will be displayed on the LCDpanel and in the viewfinder. C.
m3mI Custom Function Settings * C.Fn III: AutofocuslDrive C.Fn III -1 Lens drive when AF impossible If autofocus is executed, but focus cannot be achieved, the camera can either keep trying to focus or stop. 0: Focus search on 1: Focus search off Prevents the camera from becoming grossly out of focus as it attempts to focus again. Especially convenient with super telephoto lenses which can become extremely out of focus. C.
m3m.l Custom Function Settings *: C.Fn III -3 AF point selection method 0: Normal Press the < I:El > button and use < ~f: > to select the AF point. 1: Multi-controller direct Without pressing the < I:El > button first, you can just use < ~f: > to select the desired AF point. Pressing the < I:El > button will set it to automatic AF point selection. 2: Quick Control Dial direct Without pressing the < EEl > button first, you can just use the < 0 > to select the desired AF point.
UiI3ml Custom Function Settings 1< C.Fn III -6 Mirror lockup 0: Disable 1: Enable Prevents camera vibrations caused by the reflex mirror action which can disturb shooting with super telephoto lenses or close-up (macro) shooting. See page 106 for the mirror lockup procedure. C.Fn III -7 AF Microadjustment o Normally, this adjustment is not required. Do this adjustment only if necessary. Note that doing this adjustment may prevent correct focusing from being achieved.
~ Custom Function Settings"* - Cil • - -• .... ..... •• I It is best to make the adjustment at the actual place to be photographed. This will make the adjustment more precise. • With setting 2, if an Extender is used, the adjustment will be registered for the lens and Extender combination. • The registered AF microadjustments will be retained even if you use the Custom Function to clear all settings (p.172). However, the setting itself will be [0: Disable]. C.Fn IV: Operation/Others C.
rnI3mJ Custom Function Settings * C.Fn IV -3 Assign SET button You can assign a frequently-used function to < @>. When the camera is ready to shoot, you can press <@>. 0: Normal (disabled) 1: Image quality Press < @ > to display the image-recording quality setting screen on the LCD monitor. Turn the < (r':l~ > or < 0 > dial to set the desired imagerecording quality, then press <@>. 2: Picture Style Press < @ > to display the Picture Style selection screen on the LCD monitor.
m3m.l Custom Function Settings"* C.Fn IV -5 Focusing Screen If you change the focusing screen, change this setting to match the focusing screen type. This is to obtain the correct exposures. 0: Ef-A 1: Ef-D 2: Ef-S About focusing screen characteristics Ef-A: Standard Precision Matte Standard. focusing screen that comes with the camera. Provides good viewfinder brightness and enables easy manual focusing. Ef-D: Precision Matte with grid This is the Ef-A with a grid.
Imm.l Custom Function Settings * C.Fn IV -6 Add original decision data 0: Off 1: On Data for verifying whether the image is original or not is appended to the image automatically. When the shooting information of an image appended with the verification data is displayed (p.133), the < iii> icon will appear. To verify whether the image is original, the Original Data Security Kit OSK-E3 (sold separately) is required.
Ii!iI3ID.l Registering My Menu * For faster access, you can register up to six menus and Custom Functions whose settings you change frequently. Select [My Menu settings]. ., Under the [*] tab, select [My Menu settings], then press <@>. My Menu settings 2 Register Sort 3 Select [Register]. • Turn the < 0 > dial to select [Register], then press < @ >. Register the desired items. • Turn the <0> dial to select the item, then press < § >.
Dill Register Camera User Settings *" Under the Mode Dial's < [i] > and < ~ > positions, you can register most of the current camera settings containing your preferred shooting mode, menus, Custom Function settings, etc. 1 Select [Camera user setting] . INFO. button Flash control • Under the [~=J tab, select [Camera user setting], then press < @ >. Normal disp. -- -- -- _._- Camer~use!_s~ttjng _ Clear settings Camera user setting - Reg I sjer_ __ Clear settings _ - 2 Select [Register].
Reference This chapter provides reference information for camera features, system accessories, etc. The back of this chapter also has an index to make it easier to look up things.
INFO. Checking Camera Settings When the camera is ready to shoot, press the < INFO. > button and "Camera settings" and "Shooting functions" screens will appear. When "Shooting functions" is displayed, you can set the shooting functions while looking at the LCD monitor. Display "Camera set." and "Shoot. func." • Press the < INFO. > button. • The button toggles between the two screens. Display one of them. • Under the [~:] tab, select [INFO. button], then press <@>. • Select [Camera set.] or [Shoot. tunc.
INFO. Checking Camera Settings Shooting Functions lock-~-, .--~ AE Aperture Shutter speed - I Exposure level/-.. AEB range Shooting mode AF point . Image-recording quality --'1 !I!! ! I Picture Style ISO speed r-"'-" Highlight tone priority 1""'" I ! F8.0 * lmJ800 0+ -2 •• 1.. t:) •• 1.:2 ~ -213 1/160 P .1 • ., lm+. L ;iH~, ~ Quick Control icon Battery check. Flash exposure ~ compensation ~ ~ ONE SHOT ~~ ! ..........1 White balance correction _._~..J [$J QlH - Drive mode 14 (28] .
Using a Household Power Outlet With AC Adapter Kit ACK-E2 (sold separately), you can connect the camera to a household power outlet and not worry about the battery level. 1 Connect the DC plug. • Connect the DC Coupler's plug to the AC adapter's socket. Connect the power cord. • Connect the power cord to the AC adapter. • Insert the prongs into a power outlet. • After using the camera, unplug the power plug from the power outlet. 3 Place the cord in the groove.
Replacing the Date/Time Battery The date/time (back-up) battery maintains the camera's date and time. Its service life is about 5 years. If the date/time is reset when the battery is replaced, replace the back-up battery with a new CR2016 lithium battery as described below. The date/time setting will also be reset, so be sure to set the correct date/time. Set the power switch to . Remove the battery. Take off the battery holder. (+) (-) 4 Replace the battery.
Using the Battery Grip These are supplemental instructions for using Battery Grip BG-E2 with this camera. For instructions other than "Detaching the Battery Compartment Cover" and "Battery Life" explained below, refer to the Battery Grip BG-E2 Instruction Manual. If you have Battery Grip BG-E2N, read the BG-E2N's Instruction Manual. _------------------------ -----------_.. Detaching the Battery Compartment Cover • Put the camera on a flat surface and hold it firmly so it does not fall.
Menu Settings 0" Shooting 1 (Red) Page Quality .L /.IIL /.M /.IIM /.5/.115 Ilm!i!J / SIi!.WJ 1 / SIi!.WJ 2 60 Red-eye On/Off Off/On 108 Beep On/Off - Shoot w/o card On/Off 29 Review time Off / 2 sec. / 4 sec. / 8 sec. / Hold 145 Peripheral iIIumin. correct. Enable / Disable 76 1/3-stop increments, ±2 stops 102 0: Shooting 2 (Red) Expo. comp./AEB White balance rN4!A:J / ~~~ / ~~ / .. / ~~~ / ~ / ~ / r:::,.
Menu Settings ~: Playback 2 (Blue) Page Highlight alert Disable / Enable 133 AF point disp. Disable / Enable 133 Histogram Brightness / RGB 134 Slide show Set the Play time and Repeat settings for automatic playback of images 139 Image jump w/ ~ 1 image 110 images 1100 images 1 Screen 1 Date 1 Folder 136 Auto power off 1min. 12 min. 14 min. /8 min. 115 min. 130 min. 1 Off 44 Auto rotate OnO. IOn.
Menu Settings ~: Set-up 3 (Yellow) Page INFO. button Normal disp. / Camera set. / Shoot. func. 188 Flash control Flash firing / Built-in flash function setting I External flash function setting / External flash C.Fn setting I Clear external flash C.Fn setting 111 Camera user setting Register current camera settings to the Mode Dial's [i] or ~ position 186 Clear settings Clear all camera settings I Delete copyright information 45 Firmware Ver. For updating the firmware - .
Function Availability Table .: Set automatically 0: User selectable 0 : Not selectable ..·.-.·.·.-.-.-.·.-w...·· . '. Basic Zone Creative Zone Mode Dial ~ ~ m @) p Tv Av M A-OEP JPEG 0 '" til & 0 0 0 0 0 0 0 0 0 0 0 0 RAW 0 0 0 0 0 0 0 0 0 0 0 0 0 RAW + JPEG 0 0 0 0 0 0 0 0 0 0 0 0 0 CII- Auto • • • • • • • • 0 0 0 0 0 Q.
Function Availability Table . : Set automatically 0: User selectable 0 : Not selectable Basic Zone Creative Zone Mode Dial 0 Evaluative s:: t& ~ ~ ~ m • " • • • • • • • @1 p Tv Av M A·DEIl 0 0 0 0 0 0 0 0 0 0 3
Troubleshooting Guide If there is a problem, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center. Power The battery cannot be recharged with the battery charger provided. • Do not recharge any battery pack other than genuine Canon Battery Pack BP-511A, BP-514, BP-511, or BP-512. The camera does not operate even when the power switch is set to .
Troubleshooting Guide Shooting No images can be shot or recorded. • The card is not properly inserted (p.29). • If the card is full, replace the card or delete unnecessary images to make room (p.29, 144). • If you try to focus in the One-Shot AF mode while the focus > in the viewfinder blinks, a picture cannot be confirmation light taken. Press the shutter button halfway again to focus, or focus manually (p.35, 88). <. The LCD monitor does not display a clear image.
Troubleshooting Guide • ~ 9. ....: i. ~.:., - .. F ~ •• '... .-:. 4 ~ :::~ ~ • -. - , - ~ ~~ • Live View shooting is not possible. • When using Live View shooting, use a memory card (a hard disk-type card such as MicroDrive is not recommended). A hard disk-type card requires a lower temperature range for operation than normal memory cards. If the temperature gets too high, the Live View shooting may stop temporarily to prevent damage to the card's hard disk.
Error Codes Error No. Countermeasures If there is a problem with the camera, an error message appears. Follow the onscreen instructions. To recover from the error screen, turn the power switch and , or remove and reinstall the battery. If error 02 (Card problem) is displayed, remove and reinstall the card or format the card. This may resolve the problem. If the same error keeps appearing, there may be a problem. Write down the error code and consult your nearest Canon Service Center. No.
System Map Eyepiece Extender EP-EX15 /n-· · _-_· ,·\ I ' J l ST-E2 Rubber Frame Eb (Ir-~) 220EX 430EX II 580EX II Macro Ring Lite MR-14EX . .:· Bundled E-senes DIoptric Adjustment Lenses Macro Twin Lite MT-24EX . .'... .. ....... ....... Accessories ··· · o · : Eyecup Eb ......•....•....••.
System Map .~U ~ '. r. Timer Remote Controller TC-80N3 Remote Switch RS-80N3 Wireless Controller LC-5 •••• s •••• EF lenses IP • • • • EF-S lenses • - - - - - - - - - ; - : QJiDal:====i
Specifications -Type Type: Recording media: Image sensor size: Compatible lenses: Lens mount: Digital, single-lens reflex, AF/AE camera with built-in flash Type I or II CF card, UDMA-compatible 22.3 x 14.9 mm Canon EF lenses (including EF-S lenses) (35mm-equivalent focal length is approx.1.6 times the lens focal length ) Canon EF mount - Image Sensor Type: Effective pixels: Aspect ratio: Dust delete feature: CMOS sensor Approx. 15.
Specifications • Viewfinder Type: Coverage: Magnification: Eye point: Built-in dioptric adjustment: Focusing screen: Mirror: Depth-of-field preview: Eye-level pentaprism Vertical/Horizontal approx. 95% Approx. 0.95x (-1 m- 1 with 50mm lens at infinity) Approx. 22 mm (From eyepiece lens center at -1 m- 1 ) -3.0 - +1.
Specifications . - ~ - .. • ' ,.. \ ~.. w · . ... • • ... - ~ • ~: p I' .., • . • Shutter Type: Shutter speeds: Electronically-controlled, focal-plane shutter 1/8000 sec. to 1/60 sec. (Full Auto mode), X-sync at 1/250 sec. 1/8000 sec. to 30 sec., bulb (Total shutter speed range. Available range varies by shooting mode.) • Flash Built-in flash: External flash: Flash metering: Flash exposure compensation: FE lock: PC terminal: Retractable, auto pop-up flash Guide No.
Specifications - LCD Monitor Type: Monitor size and dots: Coverage: Interface languages: TFT color liquid-crystal monitor (Brightness adjustable to 7 levels) 3-in. with approx. 920,000 dots (VGA) Approx. 100% 25 - Image Playback Single, Single + Info (Image-recording quality, shooting information, histogram), 4-image index, 9-image index, image rotate possible Zoom magnification: Approx. 1.5x - 10x Image browsing methods: Single image, jump by.
Specifications • Dimensions and Weight Dimensions (W x H x D): 145.5 x 107.8 x 73.5 mm / 5.7 x 4.2 x 2.9 in. Weight: Approx. 730 g / 25.7 oz. (body only) • Operation Environment Working temperature range: O°C - 40°C / 32°F - 104°F Working humidity: 85% or less • Battery Pack BP-511A Type: Rechargeable lithium-ion battery Rated voltage: 7.4 V DC Battery capacity: 1390 mAh Dimensions (W x H x D): 38 x 21 x 55 mm / 1.5 x 0.8 x 2.2 in. Weight: Approx. 82 g /2.9 oz.
Specifications • EF-S18-200mm f/3.5-5.6 IS Angle of view: Diagonal extent: 74°20' - 7°50' Horizontal extent: 64°30' - 6°30' Vertical extent: 45°30' - 4°20' Lens construction: 16 elements in 12 groups Minimum aperture: f/22 - 36 Closest focusing distance: 0.45 m / 1.48 ft. (From image sensor plane) Max. magnification: 0.24x (at 200 mm) 452 x 291 - 93 x 62 mm / 17.8 x 11.5 - 3.7 x 2.4 in. (at Field of view: 0.45 m) Image Stabilizer: Lens shift type Filter size: 72 mm Lens cap: E-72 Max.
Specifications • EF28-13Smm f/3.S-S.6 IS USM Angle of view: Diagonal extent: 75° - 18° Horizontal extent: 65° - 15° Vertical extent: 46° - 10° Lens construction: 16 elements in 12 groups Minimum aperture: f/22 - 36 Closest focusing distance: 0.5 m / 1.64 ft. (From image sensor plane) Max. magnification: 0.19x (at 135 mm) 551 x 355 - 188 x 125 mm / 21.7 x 14.0 - 7.4 x 4.9 in. (at Field of view: 0.5 m) Image Stabilizer: Lens shift type Filter size: 72 mm Lens cap: E-72U Max. diameter x length: 78.4 x 96.
Trademarks .. Adobe is a trademark of Adobe Systems Incorporated. .. CompactFlash is a trademark of SanDisk Corporation . ., Windows is a trademark or registered trademark of Microsoft Corporation in the United States and other countries. • Macintosh and Mac as is a trademark or registered trademark of Apple Inc. in the United States and other countries. • HDMI, HDMI logo, and High-Definition Multimedia Interface are a trademark or registered trademark of HOMI Licensing LLC.
Safety Warnings Follow these safeguards and use the equipment properly to prevent injury, death, and material damage. Preventing Serious Injury or Death • To prevent fire, excessive heat, chemical leakage, and explosions, follow the safeguards below: - Do not use any batteries, power sources, and accessories not specified in this booklet. Do not use any home-made or modified batteries. - Do not short-circuit, disassemble, or modify the battery pack or back-up battery.
~ . . . ,.. . . . . - .~~ . ' •• : : -.J'·I· .:: 1'" • If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the internal parts due to the possibility of electrical shock. • Do not disassemble or modify the equipment. High-voltage internal parts can cause electrical shock. • Do not look at the sun or an extremely bright light source through the camera or lens. Doing so may damage your vision. • Keep the camera from the reach of small children.
Digital Camera Model 05126211 Systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital devices, pursuant to Part 15 of the FCC Rules.
IMPORTANT SAFETY INSTRUCTIONS 1. SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for Battery Charger CG-580 & CB-5L. 2. Before using the charger, read all instructions and cautionary remarks on (1) the charger, (2) the battery pack, and (3) the product using the battery pack. 3. CAUTION - To reduce risk of injury, charge only the Battery Pack BP-511A, BP-514, BP-511, or BP-512. Other types of batteries may burst, causing personal injury and other damage. 4.
MEMO .............. 216 . .
MEMO .•_ _._ .." .. ---.,----_•..• _----_._---._._-~ .•• "'~-'---'_."""~. __ .. _ ..'-'" -~._._--~--_ -.-.-.------.•.•.- -----.--•..•.•---- ,.• ------...• ~,.- .. _-..•--- ...• •.• ·· ·_·_~_· .A·.
MEMO 218
MEMO • 219
MEMO .................................................................................................................................................. ..... _----~_ 220 -..--¥_.._ _-_ __ -.. .._.. -.~ ,._._~ _.._.._._- .. ~ -_._._._--~-,,¥._ .._-_ _.-.~~._._ _.._.. ~_._._ .. _--~._----_ .. ..__._ ~ __.. _-~-_ _--_.
MEMO • 221
MEMO 222
Index AC Adapter Kit 190 Access lamp 30 A-DEP (Automatic depth-of-field AE) 99 Adobe RGB 82 AE lock AF ~ 102, 174, 175 Focusing AF Microadjustment 180 AF start button 35, 181 AF stop button 178 AI Focus AF 85 AI Servo AF 50, 85 Aperture-priority AE 96 .
Index Date ~ Date/Time Date/Time 42 Date/time battery replacement...
Index Hi-Definition 142 Highlight alert 133 JPEG Highlight detail loss 133 Jump display Highlight tone priority 177 Histogram Brightness / RGB 134 Household power 190 Language selection Illumination (LCD panel) 104 Image AF point display Auto playback Auto rotate Erase Highlight alert Histogram Index Jump display Magnified view Manual rotate Playback Protect Shooting information Transfer to personal computer Viewing on TV 133 139 146 144 133 134 135 136 137 138 131 143 133 167 141 LCD mon
Index Metering mode 100, 189 Evaluative! Partial! Spot! Center-weighted average MF (Manual focusing) Mirror lockup Mode Dial -7 88 106, 180 Picture Style Adjustment Selection User defined 67 65 69 Pixel count selection 60 Playback Shooting mode -7 Image Monochrome image 66, 68 Portrait..
Index Revert to default settings .45 sRAW (Small RAW) Review time 145 Strap Rotate (image) 138, 146, 161 Safety shift 175 Safety warnings 212 Saturation 67, 160 Self-timer 90 Sensor cleaning 147 Sepia (Monochrome) 68 Sharpness 67 Shoot w/o card 29 Shooting information display 133 Shooting mode A-DEP Aperture-priority AE Close-up Creative Auto Flash off Full Auto Landscape Manual exposure Nig ht Portrait. Portrait Program AE Shutter-priority AE Sports 20 99 96 ,53 57 56 .
Canon CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. - - - - CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. Far all inquires concerning this product, call toll free in the U.S. 1-800-0K-CANON CANADA - - - CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTREAL BRANCH 5990, C6te-de-Liesse, Montreal Quebec H4T 1V7, Canada CANON CANADA INC. CALGARY OFFICE 2828, 16th Street, N.E.
Quick Start Guide Canon 1 (;~ @'~.~ EOS 50§) CD~ Insert the battery. 6 0 '--..: ~ 2 .131••••• Set the Mode Dial to <0> (Full Auto). All the necessary camera settings will be set automatically. Image Playback ~~ ~~ ~""'.I-----. '--'-------'>..---L-----" ~ ~,::--.L""''''''' Attach the lens. When attaching an EF-S lens, V"/ ~~i!':"""~" align it with the white index on the camera. For other lenses, align it with the red index. 7 Focus the subject.
IBt:=================- Preparation < MENU> button •• ,()I' -t1f(;~~~=~~~~~~ Shooting 1 " LCD monitor <0> Quick f ()I: '" ~ e.'.'ill 0.01 ±O sRGB Standard . rHighlight alert ~ [Alita'poweroff Beep , On hoot w/o card ReView time lion .1 2 sec. I , Menu settings Tab ~: Set-up 1 Auto rotate Format File numbering Select folder Contmuous Image-recording Quality ] ~ are not displayed. ~L Pixels I 15M 4752K3168 [2051' ..,.
ShootingOperation---------------------------------------LCD Panel Nomenclature Basic Zone Modes I Shutter speedl Aperture Image-recording quality ~I_I~. Shots remaining All the settings necessary for shooting are set automatically. You just press the shutter button, and the camera does the rest. =BBBB:B.B[BBB] Wh·t b I I e a ance-~~~~ ~5~ Fla,he,po"," compensation c+t~~"1l- < ~ > Flash button _····:r"'!", [$ ~ Battery check ~ ~ -Q~ -b~ / OK 1 " ~~ 2~M~-AF mode ~~~ii'ii~iiig2IB~.~~ ~H ~ ...
Custom Functions AF: AF Mode* L.-..L.L-J.-""='----'-"----'o.... button, then turn the < 8 > dial. • ISO 100 to 3200 can be set in 1/3-stop increments. • When "A" is selected, the ISO speed is set automatically. When you press the shutter button halfway, the ISO speed setting will be displayed. • Set the lens focus mode switch to . • Press the < AF' DRIVE> button, then turn the dial.
Canon Windows Vista SP1 CD-ROM o to: 1j'~ T l'::tA ~? Windows XP SP2/SP3 Jl,... 8*~li ,/1).:1.-:"'3/ Mac OS X 10.5 CD-ROM Guide T-(.A? English EOS DIGITAL Solution Disk EOS DIGITAL Solution Disk This disk contains various software for EOS DIGITAL. EOS DIGITAL 1fI0)§IlIiY71-? Iyt.ll1liliilcn<::~\il'~o EOS Utility EOS Utility t.!)<:;e:) (Y:JY'ltlllliH" IiIli!!iftO)/(Y:JY"-O)Ill1t:Jil>
Canon Windows Vista SP1 Windows XP SP2/SP3 Guide sur CD-ROM o Franc;:ais EOS DIGITAL Solution Disk Ce CD contient divers logiciels pour EOS DIGITAL. a. Installation des logiciels 3 Sous Macintosh, double cliquez sur I'icone se trouvant sur Ie bureau pour ouvrir Ie CD· ROM puis double cliquez sur [Canon EOS Digital Installer]. Cliquez sur [Installation rapide] et suivez les instructions donnees I'ecran pour installer. • Sous Macintosh, cliquez sur [Installer].
Canon EF LENS
English Instructions Thank you for purchasing the Canon IS USM lens. The Canon EF28-135 f/3.5-5.6 IS* USM** lens is an interchangeable lens developed for EOS cameras that incorporates an image stabilizer function. This image stabilizing function reduces camera shake, the main cause of unusable photographs. It allows you to take sharply focused photographs at slow shutter speeds, without having to use a tripod.
~ Safety Precautions 1. Do not look at the sun, or a bright light source, through the lens or camera. Doing so could result in loss of vision. Looking at the sun directly through the lens is especially hazardous. 2. Whether it is attached to the camera or not, do not leave the lens under the sun without the lens cap attached. This is to prevent the lens from concentrating the sun's rays, which could cause a fire. This device complies with Part 15 of the FCC Rules.
Nomenclature Hood mount---~ r r - - - - - - - Focus mode switch r,------- Zoom index Distance scale Zoom ring Contacts Image stabilizer switch~ Il......
1. Mounting and Detaching the Lens Mounting the lens • Rotate the rear dust cap counter-clockwise to remove it. CD • Align the lens mount index on the lens and red dot on the camera and twist the lens clockwise until it click into place. ® • Squeeze. the release tabs on either side of the lens cap to remove it. ® Detaching the lens • While pressing the lens release button, turn the lens counterclockwise until it stops. Then remove the lens.
2. Zooming Turn the zooming ring to zoom to the desired focal length. • • • The light from the built-in flash may be partially obscured. Use ~ an external flash unit for flash photography. 3. Setting the Focus Mode To select the autofocus mode, set the focus mode switch to AF. To disable the autofocus mode, set the focus mode switch to MF, and focus manually by turning the focusing ring. The camera automatically sets the exposure value. 6.
4. Macro Mechanism This lens is equipped with a macro mechanism for low magnification close-up photography. The autofocus function is also available in the macro range. r-~-~-it~Pb;t6gt~pb-Wllh-;;;~iiriii;;;-~~g~iii~~ti~n-;;~d-tfiini;;;tiiri-fi~id-(Tl ! L.jI view coverage is required in the macro range, set the zoom ring to .: : : i L 135 mm, then set the focus mode switch to MF and turn the : focusing ring tothe minimum focusing distance in the macro range.
6. Using the Image Stabilizer The image stabilizer can be used in either AF or MF mode. 1. Set the image stabilizer switch to on I. 2. Press the shutter button halfway to activate the image stabilizer. 3. To stop using the image stabilizer function, set the image stabilizer switch to off 0 . r-lj]--~-~:~~~~7~~~~~:~:fJ~~z~l~i{~~~:~~~~~:~~~;~~::I~:f:~~ti~~---l L.....- -----I L ~~!~_~~~_ . . .
7. Tips on Using the Image Stabilizer Use the image stabilizer for taking photographs under following conditions. CD Stationary subjects (still-life photography) ® Subjects taken at dusk, or indoors, that are dimly lit. ® Where flash photography is forbidden. @)Subjects that cannot be captured with a fast shutter speed. r----------------------------------------------------------------------------------------------------.-----------------------------i.
8. Infinity Compensation Mark To compensate for shifting of the infinite focus arising from changes in temperature, the distance scale can be rotated slightly past the normal infinity focus mark. To ensure accurate focus, look through the viewfinder and check the focus before shooting. r-r~F:-F~r-~fihi~-i6~~~-~i~~,ri;~lt~(;;~~r~ttir~~-(20:ci6i3o-;;),-~ii~~th~-di~;;h';~-~';~I~-';;ith---l L~ 9.
10.Accessories (Sold separately) Hood The hood EW-788 can prevent unwanted light from entering the lens. It also protects the lens from rain, snow, and dust. Align the hood's red mark (e) with the attachment position mark on the lens, then turn it as shown by the arrow to lock it in place. r--[l]-----------------------------------------------------------------------------------i Filters : == • The hood can be reverse mounted on the lens for storage. .: 1. I .JI ...
Specifications Image Size: 24 x 36 mm/O.9 x 1.4 in. Focal Length/Aperture: 28-135 mm f/3.5-5.6 Construction: 16 elements in 12 groups Angle of View (Diagonal, vertical, horizontal extents): 75-18°, 46-10°, 65-15° Magnification and Field of View: Wide-angle: 0.07x, 355 x 551 mm/14 x 21.7 in. Telephoto: O.19x, 125 x 188 mm/4.9 x 7.4 in. Min. Focusing Distance: 0.5 m/19.7 in. Filter Size: 72 mm Max. Diameter and Length: 78.4 and 96.8 mm/3.1 and 3.8 in. Weight: 500 g/17.6 oz.
Ca11011 =F-F./ :::J~~~:tt http://canon.jp =F-F./ ::;n&7'C~~~ T 108-801 1 **m7c!~7c!i¥i2-16-6 canon.jp/ef CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. CANON U.S.A. INC. For all inquiries concerning this lens, call toll free in the U.S. 1-800-0K-CANON or write to: Customer Relations, Canon U.S.A., Inc. One Canon Plaza, Lake Success, N.Y. 11042-1198 CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC.
PRESENT OWNERSHIP AND PRODUCTS INTERESTED IN Articles deja en possession ou juges dignes d'interet CAMERAS APPAREILS -PHOTO (Camera) (Appareil) (Camera) (Appareil) INTERCHANGEABLE LENS Objectif interchangeable OWNS INTERESTED IN En possession Interesse par (Lens) (Objectif) (Lens) (Objectif) OWNS INTERESTED IN En possession Interesse par INTERESTED IN
NAME NOM ADDRESS ADRESSE CITY VILLE THIS WARRANTY CARD AND YOUR BILL OF SALE MUST BE PRESENTED FOR WARRANTY SERVICE. CETTE CARTE DE GARANTIE ET VOTRE PREUVE D'ACHAT DOIVENT ETRE PRESENTES POUR RECEVOIR LE SERVICE SOUS GARANTIE. DEALER'S NAME & ADDRESS MARCHAND NOM & ADRESSE POSTAL CODE CODE POSTAL PROVINCE MODEL MODELE BODY NO. BOITIER NO PURCHASE DATE DATE D'ACHAT / / DO NOT MAIL, KEEP THIS WARRANTY CARD. IT IS YOUR PERMANENT RECORD OF WARRANTY. IF LOST IT WILL NOT BE RE-ISSUED.
Canon LIMITED WARRANTY The Limited Warranty set forth below is given by Canon U.S.A., Inc. in the United States and Canon Canada, Inc. in Canada (herein referred to collectively as "Canon") with respect to the Canon Binoculars and Photographic Lens Products packaged with this Limited Warranty and identified by model number on this Limited Warranty Card (each a "Product") when purchased and used in the United States or Canada.
Canon _1111,.
Taking too many blurry pictures? Canon IS * Lenses are the solution! I 01 I
Nice shot! Or is it? When you enlarge your image, the print looks fuzzy. Frustrating! But a common experience. In most cases, this accidental blurring is caused by camera shake - especially when shooting with a telephoto lens or at slow shutter speeds in dark places. Even if you try to stay still, the camera isn't perfectly steady in your hands when the shutter button is pressed. But now there's a great solution: Canon 15* Lenses. For beautifully clear, blur-free photos. With ease.
Day or night, indoors or outdoors. Canon IS Lenses give you steady control of great picturesl , .. " " I 03 I ". '.
Contents • • • • • • • • • Page 5 11 :OOAM / Zoo pictures Page 7 12:00PM / Kids in motion Page 9 2:00PM / Animal snapshots Page 11 7:00PM / Night shots Page 13 8:00PM / Indoor pictures Page 15 9:00PM / Sleeping faces Page 17 Photo freedom Page 19 Camera shake Page 25 IS Lens lineup I 04 I
11 :OOAM / Zoo pictures EF70-300mm 1/4-5.6 IS USM. 11125sE Most children love going to the zoo. Here's how to shoot "wild" picturesl Great shot! Can you get it? Photographing animals from afar takes good timing and usually, super-telephoto lens. But don't worry! With a steady-shooting Canon IS Lens, there's no fear of blurry results. Even if you're not using a tripod. P!CrU ern Blurring is virtually unavoidable when shooting distant subjects with a telephoto lens (unlike a wide-angle lens).
• 11:OOAM / Zoo pictures. hutter~p"ority AE 1/16 f/50 It's easy to get rid of distracting elements like cage bars - with a little know-how! Now, see how well the shot turns out. The cage bars are gone, and the animals look like they're in the wild.
12:00PM / Kids in motion EF70300mm f/4561S USM. 1/605eo.. Your child is swinging, running, playing actively. Now you can capture pure energy in pictures! Kid won't slow down? Panning* technique is tricky, but worth trying. Just set a Canon IS Lens to Mode 2 to correct vertical camera shake while taking pictures.
• 1200PM / Kids in motion _ If you know the optimal setting, panning techniques can get better results. Here's one example (with EF70-300mm f/ 4-5.6 IS USM): Jtler~priority AE Go ahead! Impress yourself with panning shots like a pro! (: Actually, there's no simple answer. The optimal shutter speed varies depending on the amount of subject motion and other conditions.
2:00PM / Animal snapshots EF70-300mm 114-56 IS USM. 1/1 25sec Turn a tiny creature into a great picture. Canon IS telephoto zoom makes it easy! You're in the park and a cute chipmunk is posing within range! You lower your camera and focus on its eyes. All set? No, you're not steady enough. You need a Canon IS Lens to stop camera shake - and even create a softly hazy background. Before you blame your camera for poor results, take a good look at your picture-taking posture.
• 2:00PM / Animal snapshots. Here's how to take a charming picture and get an intentionally blurred background (using EF70-300mm f/ 4-5.
7:00PM / Night shots EF-S 17-85mm f/ 456 IS USM Evening enchantment. Canon's standard IS Zoom Lens is ready for brilliant shots! As the sun sets and the dusk grows darker with every passing second, the city lights up with exciting possibilities for glamorous night shots. And you're ready to take dazzling handheld pictures with Canon's standard IS Zoom Lens. Perfect! P;,· rE: fJrC) e r'(} ::; What's the difference between these two night shots? Same low light conditions, same low shutter speed.
• 7:00PM / Night shots. Simple! Just use the convenient AEB (Auto Exposure Bracketing) function to generate three different brightness variations for a single shot! AEB eliminates the time-consuming task of searching for optimal exposure. So you won't miss once-in-a-lifetime pictures. / 4ec.
8:00PM / Indoor shots It's happy birthday timet Take pictures in low light without spoiling the mood. Low light? No flash? Don't be concerned - be inspired! Canon IS Lenses let you take full advantage of candlelight and other low light conditions to create breathtakingly beautiful indoor pictures in available illumination. On any occasion.
• 8:00PM / Indoor shots. Picture problerTls Dim light, didn't use flash, camera shake, fuzzy photos... there are so many excuses for lost photo opportunities! But now, you don't have to apologize any more because Canon IS Lenses show outstanding performance in many different kinds of indoor shooting situations. Without a flash! Without IS lens W"th flash With IS lens Flash sometimes destroys the mood of a room. Consider using available light instead (with Canon EF-S 17-85mm f/ 4-5.6 IS USM): J \;\/he
9:00PM / Sleeping faces EF-S 1785mm f/ 4-56 IS USM, 0 3sec . A child falls asleep. Now, take pictures quietly without waking the sleeperl A child's expression when asleep is especially endearing. Canon IS Lenses are the ideal choice to quietly capture these precious moments. Without distracting flash or blurred images. Without waking a child up and missing that sleeping face! Well, you didn't wake the child up by using a flash, but you didn't get the picture either.
• 9:00PM / Sleeping faces. Shooting angles really matter in photo composition, changing the whole nuance of expression. For example, here's how to use the EF-S 17-85mm f/ 4-5.6 IS USM: 1. Choose the Av mode for exposure and keep the aperture fully open 2 . Turn the IS fu nction of the lens" on. II 3 Lower your camera to your child's eve level , f 4. When aiming at the subject, put your elbow(s) on the table (or somewhere else) to hold the camera steady. 5. i\im at the child's eyelashes to determine focus
Now you can shoot anywhere, anytime.
• Great results _ I 181
\ IS benefits \ \ \ When does camera shake tend to happen, and what causes it to occur? Perhaps you've encountered blurred images when enlarging pictures: photos that look fine in smaller postcard sizes appear quite fuzzy at greater size. In fact, camera shake happens more frequently than you'd think. There are several reasons for accidental blurring.
• - - - ..... - - - . - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - Camera shake _ ~--'~ ~ \J~:'~~ How do Canon IS Lenses repress blurring caused by camera shake? Canon IS lenses detect camera shake with a pair Image Stabilizer Parallel Movement Principle of built-in gyro sensors, shifting lens components in 1. Lens When still the direction of the vibration to counteract it and Capturing element prevent blurring.
- - - ~ - - ~ ~ - ~ ~ - - - - - - - - - - - - - - ~ - - - - - - - - - - - - - - - - - - - - - - - - - \ \ In-lens image stabilizer design benefits \ \ \_-------- Why is each individual lens optimized for shake correction? Each Canon IS Lens has a unique optical design for specialized performance. So, Canon's optical correction systems and control mechanisms are customized for effective positioning in each lens model.
• Camera shake _ How does a stable viewfinder image help you take better picture? Looking into the viewfinder while focusing and framing is essential to SLR shooting, so a stable viewfinder image is crucial. Canon IS Lenses correct for camera shake by shifting certain optical components in inverse relation to the lens movement, maintaining the position of incoming light rays on the film or capturing elements.
\ In-lens image stabilizer design benefits \ Improve your framing accuracy! Blurry viewfinder images lead to framing errors, so you can inadvertently cut off important details, especially when using a telephoto zoom lens. With Canon IS Lenses such framing errors are a thing of the past. Canon's in-lens image stabilizers enable accurate framing when you fill the frame with part of your subject. Since the viewfinder image is blur-free, you can check every detail and make subtle framing adjustments.
• Camero shake _ Capture fleeting photo opportunities! Concentrating on your subject is difficult if the viewfinder image blurred. When you lose IS concentration, you tend to miss small gestures and other momentary photo occasions. Canon's inlens image stabilizer gives you a clear viewfinder image, so it's easier to notice and capture such photo opportunities. 0 0 0 0 0 ,,--- 0 I 0 0 V'ewfinder image wiIn IS on Canon IS Lenses help here.,. Decisive moments with moving subjects.
, Product overview \, Lightweight, compact standard zoom lens for digital SLRs that take EF-S lenses EF-S 17-85mm f/4-5.6 IS USM • lens consl'uction 17 elements In 12 grocps • Focusing d'slo'lCe 035m - 00 • Moximum mognlficatian rate 020x • Filter size: 67mM This shake-compensated, high-magnification standard-type IS zoom lens is ideal in combination with Canon's digital SLR cameras* including EOS 40D and EOS DIGITAL REBEL XSi/450D.
• - - - - - - - - - --- - --- --- - - - - - - Si ng Ie focal-length Ie nses - - - - - - - - - ----- - - - - - - - - - - - -- IS Lens lineup _ ~~ ================================================~ Cl EF200mm f/2L IS USM EF300mm f/28L IS USM • Ler,s construction: 17 elements in 12 groups • Focusing distance" 1.9rr . Mox;muM mogmfical1on rete O. 12x • Filter size" 52rnm rear drop In ype • lers constr:.Jcllor.: J 7 elements in 13 groups' Focu's,ng dislance: • Maximum mogn:lication lole" O.
Canon E-5 Printed In Japan 0055W102 0808Ni40.
Canon
ta snapshot? it's a chance to take state-of-the-art pictures. erCanon Macro Lenses .
I' I ,-.~\'Macro lenses let you approach small subjects and capture big image - ". But that's not the only reason to use them. By making the most of Canon Macro Lenses, you can turn everyday scenes into dramatic photographs.
i 03 03 Contents 04 Start enjoying your macro lens 20 Original ways to enjoy your photos 26 Learn more about macro lenses 31 Canon's Macro Lens lineup 33 Terms
'C"'."":~"'.' ~.'.' ;":;' "" ~ ,\' ~~1I ' .•. . " . '.• ' ...•. ~ . " ...
HO~HtI«~e (<<"e{ Wltlt te«? How It~o~t « flt~II'1 fltvorlte - fr~lt tltrtf toppe({ with.
If you think that macro lenses are just for enlarging images of small subiects or taking extreme close-ups, think again. A macro lens shows close-up pictures of ordinary subjects - revealing an unknown world! For example, you can take pictures of a colorful subject like a cake, using a blurred background for effect, and get striking professional-looking results. A colorful fresh-fruit tart appears even more appetizing when it's photographed under natural light from a window.
There are many ideal subjects for great clear image photos - a child, for example. Using a Conan Macro Lens, his portrait looks a little different from ordinary snapshots, with an attractive blurred background.
Macro lenses are ideal for taking portrait photos. Since the subject stands out crisply against a hazy background, you can capture the whole scene in an attractive image. To create a beautifully blurred background, just choose the Av ' mode setting while keeping the aperture fully open (for example, f/2.8 or an even lower f/number, depending on your lens).
'1 rll.ll1 «r op le tf. 111'1 l1\.ilt w (tk tll1 fk ow er . lI. ite r II. Lell.vef pII.rl'lD!(fe, t 0 ! 11"1 tk lj teD ll.l1 cl el1 're \.i If '1 (t j (k>tI1"(I1" (t todl'l'1 1'l11D! pkoto.,rl'lpk(l1., ow, A pr et t'1 ~f{ftel1(l1~ t~ ~e(>t\.ije 11"1 to~orr (t ' ( I'llrell.i.., ! 09 I(~kt ~orl1(l1~ f~1I.11 ~OII1" to look re(orD!ll1~ toti. '" "1D!(fjerel1t fro~ ploo~.
Rich color variations. Amazing natural patterns. Flowers are the supreme subject of macro shooting, and the ideal way to learn the basics of macro techniques. Only the close-up power of micro photography is really capable of revealing the tiniest details of petals, pistil, and stamens. Try using a colorful blurred background or a hazy dreamlike foreground to bring out the reality of this micro-scale world.
Over tlte '1el\rL fl\~I1"1 Fceef!l\~el leel+1 to .,row 111 wortlt J nflectll1, !teef el+1otlo~H\\ Itttlt(ltl+1e"t It! well I'll ele"JMt
l Why not take oictures of familv antiaues. such as Dad s old watch or camera? t ; You can make full advantage I I J of macro capabilities for clear detail and soft blurring of unfocused fields, and also emphasize aged texture and quality feeling in your images. Spend a little extra time finding the best shooting angle and lighting adjustment to maximize highlighting 2 of glass or metal parts, so the antique object is really IIpresent'1 in the image.
Woof! He PRrt'l j\l\lt OIHe A.t {trMIf}erL, tkel1 IWll+1elilRtel'1 {tArtj Wltf}.,It1' klj titI\. It ~ j kRrli to (O\l\t1t 0., kll+1 for rrotectlol1 jrol+1 ~\I\r"lI\rL V\I\t ite ~oe( ( "reA" tite In" Wltk Vljltof(. rkA.t' j o\l\r jrlel1lil'1 "WRt(kliof}.
When you spend a lot of time with pets, you'll notice a surprising range of facial expressions. Macro lens close-ups can capture these changing looks at iust the right moments, for memorable images to save and treasure. Try taking detailed pet pictures of fur or different parts of the body, using focus settings different from ordinary snapshots. Lower the camero position to the petfs eye level to capture shots with plenty of emotion.
IHlutl cl'Hterll1" l\r()~I1IA l\ illooWlII1" flowerpelA - 1",1A11~~"I; p~tterfHeL IAr",,,ol1jllel - WI/tI1':1 live! !Itt l\ til1l1 ofel1 !r~\(e. Yo~ (/tt! WIlli ",II tke ",(flvlt.., 1i1 thll IWI",II worllA wltko~t l\ Wll\(rO leM\.
Use the zoom-in feature of Canon Macro Lenses to photograph insects. You'll be amazed and captivated by the intricate structures and delicate textures against a beautiful natural background. Make full use of macro artistry to take shots of this micro world! Be very quiet as you get close to insects. And, pay careful attention to your exposure setting because this typically causes camero shake in close-up photography.
T0~~'1 w~f I' kollll~'1J ltl111 I' (o"'fll1 (lt~e over to vlflt. He ~ro"'~kt k(\ jltvorlte to'1 - A clltl\l( ~II1IAt\o\re (I'r ~o((e\ tkAt ke tfll.kej wkenver ke HII llrel'~ II to ~\.1~ tke refil.l (I'r io~e~fII.';1 IU1(( trAvel I'll over tlte worlll 111 It. IV 0\1\ I((11 ' t ';10\1\ like to I}O ~rlvil1" Wlt!<- k(~ !O~e~A'1r i 17 ~oei.
Diorama shots usually require a large-scale photo setup, but it's easy with a macro lens. For instance, iust put a beautiful scenic photo in the background, and photograph a model against it. The photo looks like you're really there! Select /lAv Mode" for a camera exposure mode. Try shooting from one angle while changing the aperture of the lens, and choose your favorite combination of background and model. To see the background more clearly, iust position the model closer to the background. p .
Canon digital SLR cameras make it possible to take pictures in black and white or sepia tones. Monochrome (B/W) photography extends your shooting capabilities while preserving original detail. Just choose these options from the menu for easy set-up. Setting methods (EOS DIGITAL REBEL XTi/400D DIGITAL)·································· j 9 i .
Print out a favorite photo and trim it to the same size as the outer circumference of a candleholder. Then roll the trimmed photo around the holder. You can choose any kind of favorite shot t 21 I -- flowers, landscapes, your child, or even your pet. Then enjoy different moods _J by changing photo subjects.
_ L...-ii_ _--:. ,:-. . a.:-.h -:~. it: ".•.; . :~.: :l_. :,<~ '". J,.I"",J.~. ~. 3~,.j. Tl.t,l~ jot",;"" =~ 1.-;0( I~: • 1 ~1: '_~~ tn w., !:(~ ... ~ ..... I" ! : ~: . ~< -".I~ '", ::"l':.~ :'-•• h ... ' ......."'0( ; " ~ .. :!.':;,. A{p~MII or IMIl it II i\ritWII1" pool:. \ r .~ \ \ ls You 've put a/l you r cul ina ry skil din ner , into a del icio us ma in course for ted cak e and served a bea utif ully dec ora for dessert.
,,~ . ",f . ~\·.t -'1'" This stylish photo stand doubles as on album. You can mount many photos IJIJ and put them on display, or carry the album around to show friends. To make it, simply fold stiff cardboard into an accordion shape fkotof and decorate it with cloth and paper. Punch holes in the front and back covers so it can be bound with cotton string or a ring. A perfect little present! I 23 I .
.... , ., 1 '2. 3 8 'I 10 5 6 1~ 13 14- 15 1e Ii W ~o 'I.e '1.1 ~1 ~~ ?'L 23 14- 2'1 30 An attrac tive calen dar is a useful item that's also impor tant in your daily life. To make one, just write dates and weeks of the year on drawi ng paper . Then select photo s suitab le to each season, pkoto ~ \ '"i I! r \ .!! /" \ I1// \ ~// \ !w,; "ltl.,L rlmj oj (ottOI1 jtrltl." etc.
F jU We send postcards on many occasions, including birthdays, seasonal greetings, party invitations, etc. Handmade postcards are the ideal way to convey your heart. Create your own and deliver your message in images as well as words.
s. I the s () 1 Canon Macro Lenses are highly regarded by professional photographers for ease of use and great results. Our lens technology provides all the features you need for capturing the best shots. So you can really enjoy macro photography with Canon.
II +. -...'-..... , --.. .., \,.,.'.", .. .. --" \.. When you want to photograph a small animal or an insect, it's important to get close quietly without scaring the subject. Canon Macro Lenses with USM and inner focus let you photograph subjects with quiet, rapid autofocus. You'll feel confident to approach many subjects that are sensitive to sound and motion in the big world around them. You'll be able to get close and capture big, bold images of small worlds! This stands Ultrasonic Motor.
Macro photography can only focus on a small area. The impression of a pho~raph chonges dramatical~ by making a small shift in the focusing point. Use autofocus for quick focus, and then turn the focus ring. When you keep your attention on the viewfinder and fine-tune the focus, the difference in the finished photo will be immediately apparent. Use this function to make precise adlustments cher fOCUSing quickly on autofocus without switching to manual.
• T . i ! rlpC)CJ rn,C)lJrit i 1; ";'-'q' '-", ! Perhaps you shoot a horizontal composition, then feel like taking a similar photo in a vertical framing. With a regular tripod, the subject position through the viewfinder inevitably shiHs and the photographer has to refocus from the start. With a tripod mount ring, however, you can maintain the position of the subject in the viewfinder - for an easy, instant frame change to a vertical, horizontal, or even an angled composition.
f- \.. ., ,s-., Enjoy macro shooting anytime with excellent quality reproduction ond a lightweight compact design Thanks to on easy-to-use viewing angle of 96mm (35mm film equivalent), you can use this versatile macro lens for a wide range of shooting purposes including small flowers and objects, portraits with blurred backgrounds, and landscapes.
. - . - .- ~ ~ --,. . t. Small animals, insects, and flowers are hard to photograph in close-up. But this macro lens has a long i 80mm focal length to shoot big, beautiful images of small subjects from farther away. Combined with a model like EOS DIGITAL REBEL XTi/400D DIGITAL *, this lens enables you to command a viewing angle of 288mm (35mm film equivalent) This allows you to take spectacular macro photos from a distance. • Lens construdon 14 elements in 12 groups. Close Focus: 0.
Useful info: .Basics of Inacrophotography , \ The magnification ratio indicates the ratio of image size captured on sensor or film to the actual size of the subject When using a magnification ratio of 1x, for example, the image captured on the sensor or film is the same size as the subject. The maximum magnification ratio represents the largest image size of a sub/ect captured by the lens. The maximum magnification ratio for standard lens EF-S 18-55mm F3.5-5.6 II USM is O.
(,trn': ,.J (Int-Iler Z::1' I • lencE-c I ' I . J _ .... An aperture diaphragm is a mechanism that controls the amount of light entering a camera through the lens. By adiusting the opening of the aperture, one can vary the depth of the zone of in-focus elements. If the aperture is wide open (f/2. 8, for example), the focused area becomes shallow, resulting in greater blurring of images in front of and behind the subject in focus.
Canon E-3 Printed in Japan 0055W101 0708Ni40.
Try My Pfio'l: Your Images Printed Free 1. Choose your favorite photo 2. Visit the Try My Photo website and follow the instructions: www.usa.canon.comjtrymyphoto 3. Canon will print your image using a select Canon Printer and mail your printed image for free* *Please refer to the Try My Photo website Terms & Conditions.
ister Now! Visit www.registercanon.com to register your new EOS camera today and receive the following: • Automatic notification of firmware and software updates • Priority telephone support* • Exclusive priority e-mail support address* There is no charge to register or for the benefits offered. * These benefits valid in the U.s. only. Please read the Terms and Conditions at www.registercanon.com for complete details. Canon For accessories and other supplies visit www.estore.usa.canon.
PIXMA: The other half of photography Integration between Digital Photo Professional and Easy-PhotoPrint Pro for professional prints Easy-PhotoPrint Pro is a professional application that allows you to make beautiful prints with the PIXMA Pr09500 and Pro9000. With seamless operation, just click to transfer your image data from Digital Photo Professional (Ver. 2.1 and later) or Adobe® Photoshop® CS/CS2 to Easy-PhotoPrint Pro then make further settings before printing.
La otra mitad de la fotografia. Asociaci6n entre Digital Photo Professional (Ver. 2.1 y posterior) &Easy-PhotoPrint Pro que simplifica sus impresiones profesionales. Easy-PhotoPrint Pro es un software especialmente creado para los profesionales de la fotograffa y artes graficas. Can solo hacer un clic, usted podra conectarse desde Digital Photo Professional (Ver. 2.
IK9-6211-002 ...
Canon CANON® PowerShot Digital Camera™ Limited WarrantyFor U.S.A. & Canada Only The limited warranty set forth below is given by Canon U.S.A., Inc. (Canon U.S.A.) in the United Stales or Canon Canada Inc.
Ca. . . o...... ~. • Garantie limitee des appareils photo nu~eriques EOS Digital CameraMC et des accessoires de CANON' '• • Pour les Etats·Unis etle Canada seulement La presente garantie limitee est foumie par Canon U.S.A., Inc. (Canon U.S.A.) aux Etats-Unis ou Canon Canada Inc. (Canon Canada) au Canada a I'egard de I'appareil photo numerique EOS de marque Canon.