English Camera Basic Instruction Manual The Camera Basic Instruction Manual covers the most basic operations and functions. Instruction manuals (PDF files) and software can be downloaded from the Canon Web site (p.4, 103). www.canon.
Introduction The EOS REBEL T7 or EOS 1500D is a digital single-lens reflex camera featuring a fine-detail CMOS sensor with approx. 24.1 effective megapixels, DIGIC 4+, high-precision and high-speed 9-point AF, approx. 3.0 shots/sec. continuous shooting, Live View shooting, Full High-Definition (Full HD) movie shooting, and Wi-Fi/NFC (wireless communication) function. Before Starting to Shoot, Be Sure to Read the Following To avoid botched pictures and accidents, first read the “Safety Instructions” (p.
Item Check List Before starting, check that all the following items are included with your camera. If anything is missing, contact your dealer. Camera (with eyecup and body cap) Strap Battery Pack LP-E10 (with protective cover) Battery Charger LC-E10/LC-E10E* * Battery Charger LC-E10 or LC-E10E is provided. (The LC-E10E comes with a power cord.) The camera does not come with the Software CD-ROM, an interface cable or HDMI cable. The Instruction Manuals provided are listed on the next page.
Instruction Manuals Camera and Wireless Function Basic Instruction Manual The booklet is the Basic Instruction Manual. More detailed Instruction Manuals (PDF files) can be downloaded from the Canon Web site. Downloading and Viewing the Instruction Manuals (PDF Files) 1 Download the Instruction Manuals (PDF files). Connect to the Internet and access the following Canon Web site. www.canon.com/icpd Select your country or region of residence and download the Instruction Manuals.
Compatible Cards The following cards can be used with the camera regardless of capacity: If the card is new or was previously formatted by another camera or computer, it is recommended that you format the card with this camera (p.44). • SD memory cards • SDHC memory cards • SDXC memory cards The camera can use UHS-I cards, but since it is not compatible with the UHS-I standard, writing/reading speeds will be equivalent to SD Speed Class 10 at most.
Quick Start Guide 1 Insert the battery (p.28). To charge the battery, see page 26. 2 Insert the card (p.28). With the card’s label facing toward the back of the camera, insert it into the card slot. 3 White index Red index Attach the lens (p.36). Align the lens’s white or red mount index with the camera’s mount index of the same color to attach the lens. 4 Set the lens’s focus mode switch to (p.36). 5 Set the power switch to <1> (p.31).
Quick Start Guide 6 Set the Mode Dial to (Scene Intelligent Auto) (p.50). 7 Focus on the subject (p.39). Look through the viewfinder and aim the viewfinder center over the subject. Press the shutter button halfway, and the camera will focus on the subject. If necessary, the built-in flash will be raised. 8 Take the picture (p.39). Press the shutter button completely to take the picture. 9 Review the picture. All the necessary camera settings will be set automatically.
Conventions Used in this Manual Icons in this Manual <6> : Indicates the Main Dial. : Indicates the cross keys on the top, bottom, left, and right. <0> : Indicates the Setting button. 0, 9, 7, 8 : Indicates that each function remains active for approx. 4 sec., 6 sec., 10 sec., or 16 sec. after you let go of the button.
Chapters Introduction 2 1 Getting Started 25 2 Basic Shooting and Image Playback 49 3 Shooting with the LCD Monitor (Live View Shooting) 69 4 Shooting Movies 83 5 Image Playback 93 6 Software Start Guide / Downloading Images to a Computer 101 9
Contents Introduction 2 Item Check List................................................................................. 3 Instruction Manuals .......................................................................... 4 Compatible Cards............................................................................. 5 Quick Start Guide ............................................................................. 6 Conventions Used in this Manual..................................................... 8 Chapters.
Contents 2 Basic Shooting and Image Playback 49 A Fully Automatic Shooting (Scene Intelligent Auto) ...................50 A Full Auto Techniques (Scene Intelligent Auto)..........................53 7 Disabling Flash ......................................................................... 55 C Creative Auto Shooting.............................................................56 2 Shooting Portraits ...................................................................... 59 3 Shooting Landscapes ..........
Contents 6 Software Start Guide / Downloading Images to a Computer 101 Software Start Guide .................................................................... 102 Downloading and Viewing the Software Instruction Manuals (PDF Files) ................................................................................... 104 Downloading Images to a Computer ............................................ 105 Index..............................................................................................
Safety Instructions Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent injury or harm to the operator of the product or others. WARNING: Denotes the risk of serious injury or death. Keep the product out of the reach of young children. A strap wrapped around a person’s neck may result in strangulation. The parts or provided items of cameras or accessories are dangerous if swallowed. If swallowed, seek immediate medical assistance.
Safety Instructions Observe the following instructions when using a battery charger or AC adapter. • Periodically remove any dust buildup from the power plug and power outlet using a dry cloth. • Do not plug in or unplug the product with wet hands. • Do not use the product if the power plug is not fully inserted into the power outlet. • Do not expose the power plug and terminals to dirt or let them come into contact with metallic pins or other metal objects.
Safety Instructions CAUTION: Denotes the risk of injury. Do not fire the flash near the eyes. It may hurt the eyes. Strap is intended for use on the body only. Hanging the strap with any product attached on a hook or other object may damage the product. Also, do not shake the product or expose the product to strong impacts. Do not apply strong pressure on the lens or allow an object to hit it. This may cause injury or damage to the product. Flash emits high temperatures when fired.
Handling Precautions Camera Care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult the nearest Canon Service Center. Wipe off any water droplets with a dry and clean cloth. If the camera has been exposed to salty air, wipe it with a well-wrung wet cloth.
Handling Precautions If condensation forms on the camera, do not use the camera. This is to avoid damaging the camera. If there is condensation, remove the lens, card and battery from the camera, and wait until condensation has evaporated before using the camera. If the camera will not be used for an extended period, remove the battery and store the camera in a cool, dry, well-ventilated location.
Handling Precautions Cards To protect the card and its recorded data, note the following: Do not drop, bend, or wet the card. Do not subject it to excessive force, physical shock, or vibration. Do not touch the card’s electronic contacts with your fingers or anything metallic. Do not affix any stickers, etc. on the card. Do not store or use the card near anything that has a strong magnetic field, such as a TV set, speakers, or magnets. Also avoid places prone to having static electricity.
Nomenclature Built-in flash/AF-assist beam emitter Mode Dial (p.23) Power switch (p.31) EF Lens mount index (p.36) Flash button EF-S Lens mount index (p.36) <6> Main Dial Hot shoe Microphone (p.84) Shutter button (p.39) Focal plane mark (p.61) Speaker (p.96) Red-eye reduction/ Self-timer lamp Strap mount (p.25) Grip p (N-Mark)* Mirror Terminal cover Contacts (p.18) Lens mount Lens lock pin Lens release button (p.37) Remote control terminal Digital terminal (p.105) Body cap (p.
Nomenclature Live View shooting/ Movie shooting button (p.70/84) Dioptric adjustment knob (p.38) Eyecup Display button (p.46, 68, 72, 86) AE lock/ FE lock button/Index/ Reduce button (p.94/95) Viewfinder eyepiece AF point selection button/ Magnify button (p.95) LCD monitor (p.42) DC cord hole Aperture/ Exposure compensation button/ Erase button (p.98) Quick Control button (p.40) Tripod socket Serial number Card slot/Battery compartment cover (p.
Nomenclature Shooting Function Settings (in Creative Zone modes, p.23) c Main Dial pointer Shooting mode Exposure level indicator Exposure compensation amount AEB range Shutter speed Aperture Auto Lighting Optimizer ISO speed Highlight tone priority Picture Style y Flash exposure compensation 0 External flash exposure compensation AF operation X: One-Shot AF 9: AI Focus AF Z: AI Servo AF MF: Manual Focus Raise built-in flash (p.
Nomenclature Viewfinder Information AF point activation indicator <•> Focusing screen AF point ISO speed White balance correction AE lock/ AEB in-progress Focus indicator Maximum burst Flash-ready FE lock out of range warning <0> Monochrome shooting ISO speed High-speed sync (FP flash) FE lock/ FEB in-progress Flash exposure compensation Highlight tone priority Exposure level indicator Exposure compensation amount AEB range Red-eye reduction lamp ON Aperture Shut
Nomenclature Mode Dial The Mode Dial includes the Basic Zone modes, Creative Zone modes, and the Movie shooting mode. Creative Zone These modes give you more control for shooting various subjects as desired. d : Program AE s : Shutter-priority AE f : Aperture-priority AE a : Manual exposure Basic Zone All you do is press the shutter button. The camera sets everything to suit the subject or scene for shooting. A : Scene Intelligent Auto (p.50) 7 : Flash Off (p.55) C : Creative Auto (p.
Nomenclature Battery Charger LC-E10 Charger for Battery Pack LP-E10 (p.26). Power plug Charge lamp Full-charge lamp Battery pack slot IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed. Battery Charger LC-E10E Charger for Battery Pack LP-E10 (p.26).
1 Getting Started This chapter explains preparatory steps before you start shooting and basic camera operations. Attaching the Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle. The eyepiece cover is attached to the strap.
Charging the Battery 1 Remove the protective cover. Detach the protective cover provided with the battery. the battery. 2 Attach As shown in the illustration, attach the battery securely to the charger. To detach the battery, follow the above procedure in reverse. LC-E10 the battery. 3 Recharge For LC-E10 As shown by the arrow, flip out the battery charger’s prongs and insert the prongs into a power outlet.
Charging the Battery Tips for Using the Battery and Charger Upon purchase, the battery is not fully charged. Charge the battery before use. Recharge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually drain and lose its capacity. After recharging the battery, detach it and disconnect the charger from the power outlet. When not using the camera, remove the battery.
Installing and Removing the Battery and Card Load a fully charged Battery Pack LP-E10 into the camera. You can use an SD, SDHC, or SDXC memory card (sold separately) with the camera. The captured images are recorded onto the card. Make sure the card’s write-protect switch is set upward to enable writing and erasing. Installing the Battery and Card 1 Open the cover. Slide the lever as shown by the arrows and open the cover. the battery. 2 Insert Insert the end with the electrical contacts.
Installing and Removing the Battery and Card After opening the card slot/battery compartment cover, be careful not to forcefully swing it back further. Otherwise, the hinge may break. The number of possible shots depends on the remaining capacity of the card, image-recording quality, ISO speed, etc. Setting [z1: Release shutter without card] to [Disable] will prevent you from shooting without a card inserted. Removing the Battery and Card the power switch to <2> 1 Set (p.31). the cover.
Installing and Removing the Battery and Card When the access lamp is lit or blinking, it indicates that images are being written to, read from, or erased from the card, or data is being transferred. Do not open the card slot/battery compartment cover. Also, never do any of the following while the access lamp is lit or blinking. Otherwise, it can damage the image data, card, or camera. • Removing the card. • Removing the battery. • Shaking or banging the camera around.
Turning on the Power If you turn on the power and the date/time/zone setting screen appears, see page 33 to set the date/time/zone. <1> : The camera turns on. <2> : The camera is turned off and does not function. Set to this position when not using the camera. 3 Auto Power Off To save battery power, the camera turns off automatically after approx. 30 seconds of non-operation. To turn on the camera again, just press the shutter button halfway (p.39).
Turning on the Power z Battery Level Indicator When the power is turned on, the battery level will be indicated in one of the four levels. z : Battery level is sufficient. x : Battery level is low, but the camera can still be used. c : Battery will be exhausted soon. (Blinks) n : Recharge the battery. Number of Possible Shots with Viewfinder Shooting (Approx.
3 Setting the Date, Time, and Zone When you turn on the power for the first time or if the date/time/zone have been reset, the date/time/zone setting screen will appear. Follow the steps below to set the time zone first. Set the camera to the time zone in which you currently live so that, when you travel, you can simply change the setting to the correct time zone for your destination, and the camera will automatically adjust the date/time.
3 Setting the Date, Time, and Zone the date and time. 4 Set Press the keys to select the number. Press <0> so is displayed. Press the keys to set the number, then press <0>. (Returns to .) the daylight saving time. 5 Set Set it if necessary. Press the keys to select [Y]. Press <0> so is displayed. Press the keys to select [Z], then press <0>. When the daylight saving time is set to [Z], the time set in step 4 will advance by 1 hour.
3 Selecting the Interface Language 1 Display the menu screen. Press the button to display the menu screen. the [52] tab, select 2 Under [LanguageK]. Press the keys to select the [52] tab. Press the keys to select the [LanguageK], then press <0>. the desired language. 3 Set Press the and keys to select the language, then press <0>. The interface language will change.
Attaching and Detaching a Lens The camera is compatible with all Canon EF and EF-S lenses. The camera cannot be used with EF-M lenses. Attaching a Lens 1 Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows. the lens. 2 Attach Align the lens’s red or white index White index with the camera’s index matching the same color. Turn the lens as shown by the arrow until it clicks in place. Red index the lens’s focus mode switch 3 Set to .
Attaching and Detaching a Lens Zooming Turn the zoom ring on the lens with your fingers. If you want to zoom, do it before focusing. Turning the zoom ring after achieving focus may throw off the focus. Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrow. Turn the lens until it stops, then detach it. Attach the rear lens cap to the detached lens. Do not look at the sun directly through any lens. Doing so may cause loss of vision.
Basic Operation Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. Turn the knob left or right so that the AF points (nine boxes) in the viewfinder look the sharpest. If the knob is difficult to turn, remove the eyecup. If the camera dioptric adjustment still cannot provide a sharp viewfinder image, using E-series Dioptric Adjustment Lenses (sold separately) is recommended. Holding the Camera To obtain sharp images, hold the camera still to minimize camera shake.
Basic Operation Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing Halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed in the viewfinder (0). While you press the shutter button halfway, the LCD monitor will turn off.
Q Quick Control for Shooting Functions You can directly select and set the shooting functions displayed on the LCD monitor. This is called Quick Control. 1 Press the button. The Quick Control screen will appear (7). the desired function. 2 Set Press the cross keys to select a function. The settings of the selected function and Feature guide (p.47) will appear. Turn the <6> dial to change the setting. You can also select from a list by selecting a function and pressing <0>.
Q Quick Control for Shooting Functions Sample Quick Control Screen Shutter speed Shooting mode* (p.23) Aperture Highlight tone priority* ISO speed Exposure compensation/ AEB setting Picture Style AF operation White balance Drive/self-timer Flash exposure compensation Raise built-in flash Auto Lighting Optimizer Image-recording quality Metering mode Functions marked with an asterisk * cannot be set with the Quick Control. When you select and press <0>, the built-in flash will be raised.
3 Menu Operations You can set various settings with the menus such as the imagerecording quality, date and time, etc. <0> button cross keys LCD monitor button Menu Screen The menu tabs and items displayed will differ depending on the shooting mode.
3 Menu Operations Menu Setting Procedure 1 Display the menu screen. Press the button to display the menu screen. a tab. 2 Select Press the cross keys to select a tab (group of functions). For example, in this manual, “the [z3] tab” refers to the screen displayed when the third z (Shooting) tab from the left [L] is selected. the desired item. 3 Select Press the cross keys to select the item, then press <0>. the setting.
3 Formatting the Card If the card is new or was previously formatted by another camera or computer, format the card with this camera. When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. Make sure to transfer the indispensable data to a computer, etc. before formatting the card. 1 Select [Format card]. Under the [51] tab, select [Format card], then press <0>. the card.
3 Formatting the Card Format the card in the following cases: The card is new. The card was formatted by a different camera or a computer. The card is full with images or data. A card-related error is displayed. Low-level Formatting Perform low-level formatting if the card’s recording or reading speed seems slow or if you want to totally erase data on the card.
Switching the LCD Monitor Display The LCD monitor can display the shooting settings screen, menu screen, captured images, etc. Shooting Function Settings When you turn on the power, the shooting settings will be displayed. When you press the shutter button halfway, the display will turn off. And when you let go of the shutter button, the display will turn on. You can also turn off the display by pressing the button. Press the button again to turn on the display.
Feature Guide The Feature guide appears when you change the shooting mode or set a shooting function, Live View shooting, movie shooting, or Quick Control for playback, and it displays a brief description of that mode, function or option. It displays the description when you select a function or option with the Quick Control. The Feature guide turns off when you further proceed with any operation.
2 Basic Shooting and Image Playback This chapter explains how to use the Basic Zone modes on the Mode Dial for best results and how to play back images. With Basic Zone modes, all you do is point and shoot while the camera sets everything automatically (p.67). Also, to prevent botched pictures due to mistaken operations, advanced shooting function settings cannot be changed.
A Fully Automatic Shooting (Scene Intelligent Auto) is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. It also adjusts focus automatically by detecting whether the subject is still or moving (p.53). 1 AF point Set the Mode Dial to . any AF point over the 2 Aim subject. All the AF points will be used to focus, and the camera will normally focus on the closest object. Aiming the center AF point over the subject will make focusing easier.
A Fully Automatic Shooting (Scene Intelligent Auto) the picture. 4 Take Press the shutter button completely to take the picture. The captured image will be displayed for approx. 2 sec. on the LCD monitor. After you finish shooting, push down the built-in flash with your fingers. The mode makes the colors look more impressive in nature, outdoor, and sunset scenes.
A Fully Automatic Shooting (Scene Intelligent Auto) The flash fired even though it was daylight. For a backlit subject, the flash may fire to help lighten the subject’s dark areas. If you do not want the flash to fire, use the Flash off mode (p.55). Other than the flash setting, the camera will shoot with the same settings as with . The flash fired and the picture came out extremely bright. Move further away from the subject and shoot.
A Full Auto Techniques (Scene Intelligent Auto) Recomposing the Shot Depending on the scene, position the subject toward the left or right to create a balanced background and good perspective. In the mode, pressing the shutter button halfway to focus on a still subject will lock the focus on that subject. Recompose the shot while keeping the shutter button pressed halfway, and then press the shutter button completely to take the picture. This is called “focus lock”.
A Full Auto Techniques (Scene Intelligent Auto) A Live View Shooting You can shoot while viewing the image on the LCD monitor. This is called “Live View shooting”. For details, see page 69. 1 Display the Live View image on the LCD monitor. Press the button. The Live View image will appear on the LCD monitor. on the subject. 2 Focus Aim the center AF point < > on the subject. Press the shutter button halfway to focus.
7 Disabling Flash The camera analyzes the scene and sets the optimum settings automatically. In places where flash photography is prohibited such as in a museum or an aquarium, use the <7> (Flash Off) mode. This mode is also effective for capturing the particular ambience of a scene, such as candlelight scenes. Shooting Tips Prevent camera shake if the numeric display (shutter speed) in the viewfinder blinks.
C Creative Auto Shooting In the mode, you can easily change the depth of field, drive/selftimer, and flash firing. You can also select and shoot with the ambience you want to convey in your images. The default settings are the same as the mode. * CA stands for Creative Auto. 1 Set the Mode Dial to . the button (7). 2 Press The Quick Control screen will appear. the desired function. 3 Set Press the cross keys to select a function.
C Creative Auto Shooting (1) Shutter speed Aperture ISO speed (2) (3) Battery level (4) Possible shots Image-recording quality Pressing the button enables you to set the following: (1) Ambience-based shots You can select and shoot with the ambience you want to convey in your images. Press the keys or turn the <6> dial to select the ambience. You can also select it from a list by pressing <0>.
C Creative Auto Shooting (3) Drive/self-timer: Press <0> and set it with the keys or <6> dial. Single shooting: Shoot one image at a time. Continuous shooting: While you hold down the shutter button completely, shots will be taken continuously. You can shoot up to approx. 3 shots per second. Self-timer: 10 sec. : The picture is taken 10 seconds after you press the shutter button.
2 Shooting Portraits The <2> (Portrait) mode blurs the background to make the human subject stand out. It also makes skin tones and hair look softer. Shooting Tips Select the location where the distance between the subject and the background is the farthest. The further the distance between the subject and background, the more blurred the background will look. The subject will also stand out better against an uncluttered dark background. Use a telephoto lens.
3 Shooting Landscapes Use the <3> (Landscape) mode for wide scenery or to have everything in focus from near to far. For vivid blues and greens, and very sharp and crisp images. Shooting Tips With a zoom lens, use the wide-angle end. When using the wide-angle end of a zoom lens, objects near and far will be in focus better than at the telephoto end. It also adds breadth to landscapes. When shooting night scenes. Since the built-in flash will be disabled, this mode <3> is also good for night scenes.
4 Shooting Close-ups When you want to shoot flowers or small things up close, use the <4> (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips Use a simple background. A simple background makes small objects such as flowers stand out better. Move in as close as possible to the subject. Check the lens for its minimum focusing distance. Some lenses have indications such as on them.
5 Shooting Moving Subjects Use the <5> (Sports) mode to shoot a moving subject, such as a running person or a moving vehicle. Shooting Tips Use a telephoto lens. The use of a telephoto lens is recommended for shooting from a distance. Use the center AF point to focus. Aim the center AF point over the subject, then press the shutter button halfway to autofocus. During autofocusing, the beeper will continue beeping softly. If focus cannot be achieved, the focus indicator will blink.
P Shooting Food When shooting food, use
(Food). The photo will look bright and appetizing. Also, depending on the light source, the reddish tinge will be suppressed in the pictures taken under tungsten lights, etc. Shooting Tips Change the color tone. You can change [Color tone]. To increase the food’s reddish tinge, set it toward [Warm]. Set it toward [Cool] if it looks too red. Avoid using flash. If you use flash, the light may reflect off the dish or food and results in unnatural shadows.
6 Shooting Night Portraits To shoot people at night and obtain a natural-looking night scene in the background, use the <6> (Night Portrait) mode. Using a tripod is recommended. Shooting Tips Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Also, use a tripod to prevent camera shake. Check the subject’s brightness. Under low light, the built-in flash will fire automatically to obtain a good exposure of the subject.
6 Shooting Night Portraits During Live View shooting, it may be difficult to focus on dots of light such as in a night scene. In such a case, it is recommended that you set the AF method to [Quick mode] and shoot. If it is still difficult to focus, set the lens’s focus mode switch to and focus manually. Tell the subject to keep still even after the flash fires. If you use the self-timer together with flash, the self-timer lamp will light up briefly after the picture is taken.
Q Quick Control In Basic Zone modes, when the shooting function settings are displayed, you can press the button to display the Quick Control screen and can set the functions shown in the table on the next page. Example: Portrait mode the Mode Dial to a Basic Zone 1 Set mode. the button (7). 2 Press The Quick Control screen will appear. the desired function. 3 Set Press the cross keys to select a function. (This step is not necessary in the A/7 mode.
Q Quick Control Settable Functions in Basic Zone Modes o: Default setting k: User selectable Function A 7 C o o o k o j: 10 sec. k k k q: Continuous shooting* k k a: Automatic firing o u: Single shooting Drive/ self-timer i: Continuous shooting Built-in flash D: Flash on (Fires at firing all times) b: Flash off Ambience-based shots 3 4 o o k k k k k k k o o 5 P 6 o o k k k k k k o o o k o k k k Light/scene-based shots Blurring/sharpening the background (p.
x Image Playback The easiest way to play back images is explained below. For more details on the playback procedure, see page 93. 1 Play back the image. Press the button. The last image captured or played back will appear. an image. 2 Select To view images starting with the last captured image, press the key. To view images starting with the first (oldest) image, press the key. Each time you press the button, the information display will change.
3 Shooting with the LCD Monitor (Live View Shooting) You can shoot while viewing the picture on the camera’s LCD monitor. This is called “Live View shooting”. Live View shooting is effective for still subjects which do not move. If you handhold the camera and shoot while viewing the LCD monitor, camera shake can cause blurred images. Using a tripod is recommended. Remote Live View Shooting With EOS Utility (EOS software, p.
A Shooting with the LCD Monitor 1 Display the Live View image. Press the button. The Live View image will appear on the LCD monitor. The Live View image will closely reflect the brightness level of the actual image you capture. on the subject. 2 Focus When you press the shutter button halfway, the camera will focus with the current AF method (p.73). the picture. 3 Take Press the shutter button completely. The picture is taken and the captured image is displayed on the LCD monitor.
A Shooting with the LCD Monitor Enabling Live View Shooting Set [Live View shoot.] to [Enable]. In Basic Zone modes, the Live View menu options will be displayed under [z2], and in Creative Zone modes, they will be displayed under [z4]. Number of Possible Shots with Live View Shooting (Approx.
A Shooting with the LCD Monitor Information Display Each time you press the button, the information display will change.
Using AF to Focus (AF Method) Selecting the AF Method You can select an AF method to suit the shooting conditions and your subject. The following AF methods are provided: [FlexiZone - Single], [u Live mode] (face detection, p.74), and [Quick mode] (p.79). If you want to achieve precise focus, set the lens’s focus mode switch to , magnify the image, and focus manually. Select the AF method. Under the [z4] tab, select [AF method]. (In Basic Zone modes, it is under the [z2] tab.
Using AF to Focus (AF Method) on the subject. 3 Focus Aim the AF point over the subject and press the shutter button halfway. When focus is achieved, the AF point will turn green and the beeper will sound. If focus is not achieved, the AF point will turn orange. the picture. 4 Take Check the focus and exposure, then press the shutter button completely to take the picture (p.70). u (Face detection) Live Mode: c Human faces are detected and focused on with the same AF method as FlexiZone - Single.
Using AF to Focus (AF Method) on the subject. 3 Focus Press the shutter button halfway and the camera will focus on the face covered by the
frame. When focus is achieved, the AF point will turn green and the beeper will sound. If focus is not achieved, the AF point will turn orange. If a face cannot be detected, the AF point < > will be displayed and AF will be executed at the center. the picture.
Using AF to Focus (AF Method) Notes for [FlexiZone - Single] and [u Live mode] AF Operation Focusing will take longer than with [Quick mode]. Even when focus is achieved, pressing the shutter button halfway will focus again. You cannot focus on a moving subject continuously. The image brightness may change during and after the AF operation. If the light source changes while the Live View image is displayed, the screen may flicker and focusing may be difficult.
Using AF to Focus (AF Method) Shooting Conditions that Make Focusing Difficult Low-contrast subjects such as the blue sky, solid-color flat surfaces or when highlight or shadow details are lost. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Subjects with repetitive patterns (Example: Skyscraper windows, computer keyboards, etc.). Fine lines and subject outlines. Under a light source whose brightness, color, or pattern keeps changing.
Using AF to Focus (AF Method) If focus is not achieved with the shooting conditions on the preceding page, set the lens’s focus mode switch to and focus manually. If you use AF with any of the following lenses, using [Quick mode] is recommended. Autofocusing with [FlexiZone - Single] or [u Live mode] may take longer or correct focus may not be achieved. EF50mm f/1.4 USM, EF50mm f/1.8 II, EF50mm f/2.5 Compact Macro, EF100mm f/2.8 Macro USM, EF75-300mm f/4-5.6 III, EF75-300mm f/4-5.
Using AF to Focus (AF Method) Quick Mode: f The dedicated AF sensor is used to focus in One-Shot AF, using the same AF method as with viewfinder shooting. Although you can focus on the target subject quickly, the Live View image will be interrupted momentarily during the AF operation. You can use nine AF points to focus (automatic selection). You can also select one AF point to focus and focus only on the area covered by that AF point (manual selection). AF point 1 Display the Live View image.
Using AF to Focus (AF Method) on the subject. 3 Focus Aim the AF point over the subject and press the shutter button halfway. The Live View image will turn off, the reflex mirror will go back down, and AF will be executed. (No picture is taken.) When focus is achieved, the AF point that achieved focus will turn green and the Live View image will reappear. If focus is not achieved, the AF point will turn orange and blink. the picture.
General Live View Shooting Cautions Image Quality When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable. Shooting in high temperatures may cause noise and irregular colors in the image. If Live View shooting is used continuously for a prolonged period, the camera’s internal temperature may rise, and image quality may deteriorate. Always exit Live View shooting when you are not shooting.
General Live View Shooting Cautions Live View Image Under low- or bright-light conditions, the Live View image may not reflect the brightness of the captured image. Even if a low ISO speed is set, noise may be noticeable in the displayed Live View image under low light. However, when you shoot, the image recorded will have less noise. (The image quality of the Live View image is different from that of the recorded image.
4 Shooting Movies Movie shooting is enabled by setting the Mode Dial to . The movie recording format will be MOV. For cards that can record movies, see page 5. Full HD 1080 Full HD 1080 indicates compatibility with HighDefinition featuring 1080 vertical pixels (scanning lines).
k Shooting Movies Connecting the camera to a TV set is recommended to play back the movies shot. Autoexposure Shooting 1 Set the Mode Dial to . The reflex mirror will make a sound, then the image will appear on the LCD monitor. on the subject. 2 Focus Before shooting a movie, focus with AF or manual focus (p.73-80). When you press the shutter button halfway, the camera will focus with the current AF method. the movie.
k Shooting Movies General Movie Shooting Cautions are on pages 91-92. If necessary, also read General Live View Shooting Cautions on pages 81-82. The ISO speed (ISO 100 - ISO 6400), shutter speed, and aperture are set automatically. You can press the button to lock the exposure (AE lock). The exposure setting will be displayed for the number of seconds set with [k2: Metering timer]. After applying AE lock during movie shooting, you can cancel it by pressing the button.
k Shooting Movies Information Display Each time you press the button, the information display will change.
k Shooting Movies Notes for Movie Shooting Do not allow the product to maintain contact with the same area of skin for extended periods of time during use. This may result in low-temperature contact burns, including skin redness and blistering, even if the product does not feel hot. The use of a tripod or similar equipment is recommended when using the product in hot places and for people with circulation problems or less sensitive skin.
k Shooting Movies Movie-related settings are under the [k1], [k2], and [k3] tabs. A movie file is recorded each time you shoot a movie (p.90). The movie image’s field of view is approx. 100% (with movie recording size set to [A]). Monaural sound is recorded by the camera’s built-in microphone (p.84). With a fully-charged Battery Pack LP-E10, the total movie shooting time will be as follows: approx. 1 hr. 30 min. at room temperature (23°C/73°F), and approx. 1 hr. 25 min.
3 Setting the Movie Recording Size The menu option [k2: Movie rec. size] enables you to select the movie’s image size [****x****] and frame rate [9] (frames recorded per second). The 9 (frame rate) switches automatically depending on the [k2: Video system] setting. Image Size [1920x1080] (A) : Full High-Definition (Full HD) recording quality. The aspect ratio is 16:9. [1280x720] (B) : High-Definition (HD) recording quality. The aspect ratio is 16:9. [640x480] (C) : Standard-definition recording quality.
3 Setting the Movie Recording Size Total Movie Recording Time and File Size Per Minute Movie recording Size Total Recording Time on Card (Approx.) File Size 4 GB 16 GB 64 GB 11 min. 44 min. 2 hr. 59 min. 340 MB/min. 11 min. 44 min. 2 hr. 59 min. 340 MB/min. 2 hr. 50 min. 11 hr. 20 min. 90 MB/min. 6 [1920x1080] 5 4 [1280x720] [640x480] 8 7 6 5 42 min.
General Movie Shooting Cautions Red Internal Temperature Warning Icon If the camera’s internal temperature increases due to prolonged movie shooting or under a high ambient temperature, a red icon will appear. The red icon indicates that movie shooting will soon be terminated automatically. If this happens, you will not be able to shoot again until the camera’s internal temperature decreases. Turn off the power and let the camera rest for a while.
General Movie Shooting Cautions Recording and Image Quality If you use a card with a slow writing speed, a five-level indicator may appear on the right of the screen during movie shooting. It indicates how much data has not yet been written to the card (remaining capacity of the internal buffer memory). The slower the card, the faster the indicator will climb upward. If the indicator becomes full, movie shooting will stop automatically.
5 Image Playback This chapter explains basic procedures to play back images and movies. Images shot and saved with another device The camera may not be able to properly display images captured with a different camera, edited with a computer, or that have had their file names changed.
x Searching for Images Quickly H Displaying Multiple Images on One Screen (Index Display) Search for images quickly with the index display showing four or nine images on one screen. 1 Play back the image. When you press the button, the last image captured will be displayed. to the index display. 2 Switch Press the button. The 4-image index display will appear. The selected image is highlighted with an orange frame. Press the button again to switch to the 9-image display.
u/y Magnified View You can magnify a captured image by approx. 1.5x to 10x on the LCD monitor. 1 Magnify the image. Press the button during image playback. The image will be magnified. If you hold down the button, the image will be magnified until it reaches the maximum magnification. Press the button to reduce the magnification. If you hold down the button, the magnification will be reduced to the single-image display. Magnified area position the display area.
k Playing Back Movies 1 Play back the image. Press the button to display an image. a movie. 2 Select Press the keys to select a movie. In the single-image display, the <1s> icon displayed on the upper left of the screen indicates a movie. If the movie is a video snapshot, [ts] will be displayed. In the index display, perforations at the left edge of a thumbnail indicate a movie. As movies cannot be played back from the index display, press <0> to switch to the single-image display.
k Playing Back Movies Movie Playback Panel Operation Playback Description 2 Exit Returns to the single-image display. 7 Play Pressing <0> toggles between playback and stop. 8 Slow motion Adjust the slow motion speed by pressing the keys. The slow motion speed is indicated on the upper right of the screen. 5 First frame Displays the movie’s first frame. 3 Previous frame Each time you press <0>, the previous frame is displayed. If you hold down <0>, it will rewind the movie.
L Erasing Images You can either select and erase unnecessary images one by one or erase them in one batch. Protected images will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them. Erasing a 1+73 image will erase both the RAW and JPEG images. Erasing a Single Image 1 Play back the image to be erased. the button. 2 Press The Erase menu will appear. the image.
B Shooting Information Display Sample Still Photo Taken in a Creative Zone Mode Exposure compensation amount Protect images Flash exposure compensation amount Rating Folder number - File number Aperture Histogram (Brightness/RGB) Shutter speed Picture Style/Settings Metering mode Shooting mode ISO speed Highlight tone priority White balance Image-recording quality Playback number/ Total images recorded Eye-Fi transfer Color space Shooting date and time White balance correction File size * With 1
B Shooting Information Display Sample Still Photo Taken in a Basic Zone Mode Ambience and ambience effects Shooting mode Lighting or scene * With images taken in a Basic Zone mode, the information displayed will differ depending on the shooting mode.
6 Software Start Guide / Downloading Images to a Computer This chapter explains the following: Overview of the software for EOS DIGITAL cameras How to download and install the software on a computer How to download and view the Software Instruction Manuals (PDF files) How to download images from the camera to a computer 101
Software Start Guide Software Overview This section explains an overview of various software applications for EOS DIGITAL cameras. Internet connection is required to download and install the software. Download and installation are not possible in environments with no Internet connection. EOS Utility With the camera connected to a computer, EOS Utility enables you to transfer still photos and movies shot with the camera to the computer.
Software Start Guide Downloading and Installing the Software Do not connect the camera to your computer before you install the software. Otherwise, the software will not be installed properly. Even if a previous version of the software is installed on your computer, follow the procedure below to install the latest version. (The previous version will be overwritten.) 1 Download the software. Connect to the Internet from a computer and access the following Canon Web site. www.canon.
Downloading and Viewing the Software Instruction Manuals (PDF Files) Internet connection is required to download the Software Instruction Manuals (PDF files). Download is not possible in environments with no Internet connection. 1 Download the Software Instruction Manuals (PDF files). Connect to the Internet and access the following Canon Web site. www.canon.com/icpd Select your country or region of residence and download the Instruction Manuals. 2 View the Software Instruction Manuals (PDF files).
Downloading Images to a Computer You can use the EOS software to download the images in the camera to a computer. There are two ways to do this. Downloading by Connecting the Camera to the Computer 1 Install the software (p.103). an interface cable (sold 2 Use separately) to connect the camera to the computer. Connect the cable to the camera’s digital terminal with the cable plug’s icon facing the front of the camera. Connect the cord’s plug to the computer’s USB terminal.
Downloading Images to a Computer Downloading Images with a Card Reader You can also use a card reader to download images to a computer. Install the software (p.103). 1 the card into the card 2 Insert reader. Digital Photo Professional to 3 Use download the images. Refer to the Digital Photo Professional Instruction Manual. When downloading images from the camera to a computer with a card reader without using EOS software, copy the DCIM folder on the card to the computer.
Trademarks Adobe is a trademark of Adobe Systems Incorporated. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. SDXC logo is a trademark of SD-3C, LLC. HDMI, HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Third party software This product includes third party software. expat.
Use of genuine Canon accessories is recommended This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc. caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
Digital Camera Model DS126741 Systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital devices, pursuant to Part 15 of the FCC Rules.
USA and Canada only: The Lithium ion/polymer battery that powers the product is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery. For CA, USA only Included lithium battery contains Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
Index Numerics 1280x720 (movie) ...........................89 1920x1080 (movie) .........................89 640x480 (movie) .............................89 A A (Scene Intelligent Auto)............50 Access lamp ...................................30 Accessories ......................................3 Angle of view ..................................37 Auto Lighting Optimizer ..................49 Auto power off.................................31 B Basic Zone modes ..........................23 Battery .......
Index I Image Zone.....................................23 Images Erasing .......................................98 Index display...............................94 Magnified view............................95 Playback ...............................68, 93 Shooting information...................99 Index display ...................................94 L Landscape ......................................60 Language selection.........................35 Large (image-recording quality) ......21 LCD monitor...........
Index S SD, SDHC, SDXC cards 9 Cards Shooting function settings.........21, 46 Shooting information display...........99 Shooting modes..............................23 A (Scene Intelligent Auto) .......50 7 (Flash Off) ............................55 C (Creative Auto) .....................56 2 (Portrait) ................................59 3 (Landscape) .........................60 4 (Close-up) .............................61 5 (Sports).................................62 P (Food) .............................
English Wireless Function Basic Instruction Manual In Wireless Function Basic Instruction Manual, basic operation procedures for easy-to-use “Connect to a smartphone” and “Save images to Connect Station” are explained.
Introduction What You Can Do Using the Wireless Functions By connecting to a Wi-Fi network or other device supporting this camera’s wireless functions, you can perform tasks such as transferring images or controlling the camera. (1) Connect to a smartphone (CANON iMAGE GATEWAY) (5) Send images to a Web service (4) Save images to Canon Connect Station* (2) Transfer images between cameras (3) Print images using a Wi-Fi printer * Use the latest firmware.
Introduction (1) q Connect to a smartphone (p.W-17) Connect the camera to a smartphone or tablet wirelessly and use the dedicated application “Camera Connect” to operate the camera remotely or view images stored in the camera. In this manual and on the camera’s LCD monitor, “smartphone” refers to smartphones and tablets. (2) z Transfer images between cameras Transfer images between Canon cameras with built-in wireless functions.
Introduction Instruction Manual For more detailed procedures, refer to the Instruction Manual downloadable from the Canon Web site. For how to download the Instruction Manual, see page 4.
Contents Introduction W-2 What You Can Do Using the Wireless Functions ........................ W-2 Conventions Used in this Manual ................................................ W-6 Preparation and Basic Operation 1 W-7 Registering a Nickname............................................................... W-8 Basic Operation and Settings .................................................... W-11 NFC Function.............................................................................
Conventions Used in this Manual In this manual, the term “wireless” is used as a general term for Wi-Fi and Canon’s original wireless functions. Icons in this Manual <6> : Indicates the Main Dial. : Indicates the cross keys on the top, bottom, left, and right. <0> : Indicates the Setting button.
1 Preparation and Basic Operation This chapter describes how to register a nickname (for identification) necessary for using the camera’s wireless functions and the basic operations.
Registering a Nickname First, set the camera’s nickname (for identification). When the camera is connected to another device wirelessly, the nickname will be displayed on the device. Be sure to set a nickname as otherwise you cannot set the wireless functions. 1 Select [Wi-Fi/NFC]. Under the [53] tab, select [Wi-Fi/ NFC], then press <0>. [Enable]. 2 Select Press the key to select [Enable], then press <0>.
Registering a Nickname a nickname. 3 Enter For instructions on entering characters, see the next page. When using the default nickname (the camera name), proceed to step 4. Otherwise, enter any characters between 1 to 10 characters in length. the setting. 4 Exit When you are finished, press the button. Select [OK] on the confirmation dialog and press <0> to return to the menu screen. The nickname can be changed later on the [General sett.] screen.
Registering a Nickname Virtual Keyboard Operation Changing the entry area Press the button to toggle between the top and bottom entry areas. Moving the cursor Press the keys to move the cursor. Entering text In the bottom area, press the cross keys or turn the <6> dial to select a character, then press <0> to enter it. You can check how many characters you have entered, and how many more can be entered, by referring to [*/*] on the upper right of the screen.
Basic Operation and Settings The basic operation for using the camera’s wireless functions is explained here. Follow the procedures below. 1 Select [Wi-Fi/NFC]. Under the [53] tab, select [Wi-Fi/ NFC], then press <0>. [Enable]. 2 Select Press the key to select [Enable], then press <0>. When a nickname (for identification) is not registered, a registration screen is displayed. See page W-8 to register a nickname. [Wi-Fi function] under the [53] tab is now selectable.
Basic Operation and Settings the Wi-Fi function to 4 Select connect to. Press the or keys to select an item. When the connection settings are not registered, the setting screen is displayed. When the connection settings are already registered, the reconnection screen is displayed. When using the NFC function, see page W-14. [Wi-Fi/NFC] Set to [Enable] to enable the selection of [Wi-Fi function] under the [53] tab.
Basic Operation and Settings Wireless Connection Status Wireless connection status can be checked with the camera’s lamp. Connection Status Connected Data is being sent or received Waiting for connection/ Waiting for reconnection lamp Connection error Lamp On Blinking rapidly Blinking Blinking somewhat rapidly Cable Connection Cautions When [53: Wi-Fi/NFC] is set to [Enable], connection via interface cable or HDMI cable is disabled.
NFC Function Using an NFC-enabled smartphone or Connect Station enables you to do the following: Touch a smartphone to the camera to easily connect them wirelessly (p.W-19). While playing back images on the camera, touch a smartphone to the camera to send a captured image to the smartphone (p.W-30). Hold the camera close to Connect Station (sold separately) to easily connect them wirelessly (p.W-36). When using the NFC function, follow the steps below to set the camera’s NFC setting.
NFC Function When establishing wireless communications using the NFC function, see the following pages. Connecting to a smartphone wirelessly: page W-19* Sending images to a smartphone: page W-30* Connecting to Connect Station: page W-36 * When connecting to a smartphone, see pages W-16 and W-18 as well. NFC Function Cautions This camera cannot be connected to other NFC-enabled cameras or printers using the NFC function.
Preparation for Smartphones To use [q] (Connect to smartphone), a smartphone on which iOS or Android is installed is necessary. In addition, the dedicated application Camera Connect (free of charge) must be installed on the smartphone. Camera Connect can be downloaded from the App Store or Google Play. For the operating system versions supported by Camera Connect, refer to the download site of Camera Connect.
2 Connecting to a Smartphone Connecting the camera to a smartphone enables you to do the following: • View images stored in the camera on a smartphone or save viewed images to a smartphone. • Operate the camera to take a picture or change camera settings using a smartphone. • Send images to a smartphone from the camera. Install Camera Connect on the smartphone before setting up a connection (p.W-16). The camera cannot be connected to a smartphone when the Mode Dial is set to .
Connection Method When the smartphone is NFC-enabled: See page W-19. You can easily set up a connection using the NFC function. When the smartphone is not NFC-enabled: See page W-22. Set up a connection by selecting [Easy connection]. Smartphones labeled with the p mark are NFC-enabled. Some smartphones are not labeled with the p mark even if they are NFCenabled; if you do not know whether your smartphone is NFC-enabled, contact the manufacturer of the smartphone.
Connecting Automatically with the NFC Function Connect the camera and a smartphone using the NFC function. The operation flow for connecting via NFC is as follows. (1) Turn on the camera and smartphone. (2) Enable the NFC function on the camera and smartphone. (3) Touch the smartphone to the camera so that they come into contact with each other. For the camera’s NFC setting, see page W-14.
Connecting Automatically with the NFC Function to the camera. 3 Connect When a connection is established, The device name set on Camera Connect the screen on the left will appear on the camera’s LCD monitor. When connecting to the same smartphone, this screen will not appear again. Select [OK] and press <0>. The camera’s lamp will light up in green. After a message is displayed, the camera’s LCD monitor will turn off. The main window of Camera Connect will be displayed on the smartphone.
Connecting Automatically with the NFC Function If necessary, also read “NFC Function Cautions” (p.W-15). When touching the smartphone to the camera, be careful not to drop the camera or smartphone. Do not touch the smartphone to the camera with too much force. Doing so can scratch the camera or smartphone. Just holding the smartphone close to the mark may not establish a connection. Be sure to touch the mark with the smartphone so that they come into contact with each other.
Connecting with Easy Connection The camera and a smartphone can be directly connected wirelessly. Since no access point is necessary for connection, you can establish a wireless connection easily. To establish connection, operations on the smartphone are required. For details, refer to the smartphone’s instruction manual. Operation on the Smartphone-1 1 Install Camera Connect on the smartphone (p.W-16). Operation on the Camera-1 [Wi-Fi function].
Connecting with Easy Connection Operation on the Smartphone-2 Smartphone’s screen (sample) the smartphone and 5 Operate connect it to the camera. Activate the smartphone’s Wi-Fi function, then select the SSID (network name) displayed on the camera’s LCD monitor. For the password, enter the encryption key displayed on the camera’s LCD monitor. Camera’s screen SSID (network name) Encryption key (password) Camera Connect on the 6 Start smartphone.
Connecting with Easy Connection the camera to connect to 7 Select on the smartphone. Select and touch the camera to connect to from [Cameras] on Camera Connect. Operation on the Camera-2 to the camera. 8 Connect When a connection is established, The device name set on Camera Connect W-24 the screen on the left will appear on the camera’s LCD monitor. Select [OK] and press <0>. The camera’s lamp will light up in green. After a message is displayed, the camera’s LCD monitor will turn off.
Connecting with Easy Connection Operation on the Smartphone-3 the camera using 9 Operate Camera Connect. Perform further operations using Camera Connect. See page W-26. The settings for connecting to a smartphone are now complete. You can check or change the device name on the setting screen of Camera Connect. While connected, the camera’s auto power off does not function.
Operating the Camera Using a Smartphone You can use a smartphone with Camera Connect installed to view images stored in the camera and shoot remotely. Camera Connect Main Window The main functions of Camera Connect are described below. [Images on camera] Images stored in the camera can be viewed. Images stored in the camera can be saved on a smartphone. Operations such as deletion can be performed on images stored in the camera.
Operating the Camera Using a Smartphone Terminating the Connection To terminate the connection, perform either of the following operations. On the smartphone’s Camera Connect screen, tap [e]. Set the camera’s power to <2>. While connected, a picture cannot be taken even if the camera’s shutter button is pressed. In remote shooting, the AF speed may become slower.
Reconnecting The camera can reconnect to a smartphone for which connection settings have been registered. 1 Select [Wi-Fi function]. Under the [53] tab, set [Wi-Fi/NFC] to [Enable], then select [Wi-Fi function]. [q]. 2 Select Select [q] (Connect to smartphone) and press <0>. [Connect]. 3 Select When settings for multiple connection destinations are registered, select [Choose set.], select the connection destination, then connect to the destination. Select [Connect] and press <0>.
Reconnecting the smartphone’s Wi-Fi 4 Activate function. If the connection destination has been changed, restore the setting to connect to the camera. Camera Connect on the 5 Start smartphone. A connection will be established. If you do not know the SSID of the camera when reconnecting, select [Review/change settings] in step 3 to check it. With NFC connection or when connecting by selecting [Easy connection], “_Canon0A” is displayed at the end of the SSID.
Easy Image Transfer Using the NFC Function While playing back images on the camera, touch an NFC-enabled smartphone to the camera to send a captured image to the smartphone. If a connection has already been established wirelessly, terminate the connection and then play back an image on the camera. Set up the camera to allow use of its NFC function in advance (p.W-14). For the smartphone’s Wi-Fi setting, NFC setting, and NFC antenna position, refer to the smartphone’s instruction manual.
Easy Image Transfer Using the NFC Function the images to send. 4 Select Select and send image(s). When the index display is selected in step 2, the multiple image selection screen will appear. See step 3 on page W-32. Sending Images Individually Select and send images individually. 1 Select an image to send. Press the keys to select an image to send, then press <0>. By pressing the button, you can switch to the index display and select an image. [Send img shown].
Easy Image Transfer Using the NFC Function Sending Multiple Images Select multiple images and send them at once. If the multiple image selection screen is displayed, perform from step 3. 1 Press <0>. [Send selected]. 2 Select To select a size at which to send the images, select [Resize image] and press <0>. Select [Send selected] and press <0>. the images to send. 3 Select Press the keys to select the image to send, then press the keys.
Easy Image Transfer Using the NFC Function [Resize image]. 4 Select Set it if necessary. On the displayed screen, select an image size, then press <0>. [Send]. 5 Select The selected images will be sent. When the transfer is complete, the screen for step 1 will reappear. To send other images, repeat steps 1 to 5.
Easy Image Transfer Using the NFC Function Terminating the Connection To end the image transfer, press the button on the image transfer screen. Select [OK] on the confirmation dialog to terminate the connection. If necessary, also read “NFC Function Cautions” (p.W-15). While connected, a picture cannot be taken even if the camera’s shutter button is pressed. Images cannot be sent using the NFC function while the camera is connected to another device wirelessly.
3 Connecting to Connect Station Connect Station (sold separately) is a device that allows you to import captured still photos and movies for viewing on your TV set, smartphone, etc., or for sharing over a network. You can easily save still photos and movies to Connect Station by holding this camera close to Connect Station.
Saving Images This section explains how to connect the camera and Connect Station (sold separately) wirelessly. To save images in other ways, refer to the Connect Station Instruction Manual. Set up the camera to allow use of its NFC function in advance (p.W-14). the NFC function on the 1 Enable camera (p.W-14). the camera close to Connect 2 Hold Station. NFC connect point Turn on the camera and Connect Station, then hold the camera’s p mark close to the Connect Station’s NFC connect point.
Saving Images If necessary, also read “NFC Function Cautions” (p.W-15). While saving images, a picture cannot be taken even if the camera’s shutter button is pressed. Do not drop the camera on Connect Station or touch the camera to it with too much force. Doing so may damage Connect Station’s internal hard disk. If the camera is not recognized right away, try holding it close to Connect Station and slowly moving it or rotating it horizontally.
W-38
Wireless Communication Function Precautions 9Countries and Regions Permitting Wireless Communication Function Use Use of wireless communication functions is restricted in some countries and regions, and illegal use may be punishable under national or local regulations. To avoid violating wireless communication function regulations, visit the Canon Web site to check where use is allowed.
Hereby, Canon Inc., declares that this DS126741 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.canon-europe.com/ce-documentation Wi-Fi Frequency range: Wi-Fi Maximum output power: 2401 MHz - 2473 MHz 13.64 dBm CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands CANON INC.
Index A Android....................................... W-16 C Cable.......................................... W-13 Camera Connect............. W-16, W-26 Connect Station.......................... W-35 Connecting to a smartphone...... W-17 E Eye-Fi Card................................ W-13 I iOS ............................................. W-16 K Keyboard.................................... W-10 N NFC............ W-14, W-18, W-19, W-36 Sending images..................... W-30 Nickname .................
The descriptions in this Instruction Manual are current as of October 2017. For information on the compatibility with any products introduced after this date, contact any Canon Service Center. For the latest version Instruction Manual, refer to the Canon Web site.
CPB-L507-000 © CANON INC.
Nomenclature EF Zoom Lenses EF80-200mm f/4.5-5.6 II EF75-300mm f/4-5.6 II EF75-300mm f/4-5.6 III EF90-300mm f/4.5-5.6 ● ① ② ● ③ ● ④ ● ⑤ ● ⑥ ● Zoom ring Zoom position index Contacts Lens mount index Focus mode switch Focusing ring EF80-200mm f/4.5-5.6 II Instructions Thank you for purchasing a Canon product. Safety Precautions 1. Do not look at the sun or a bright light source through the lens or camera. Doing so could result in loss of vision.
4. Hood The lens hood can keep unwanted light out of the lens, and also protects the lens from rain, snow, and dust. Fit the hood to the hood mount, then turn it in the direction of the arrow to attach it securely ❻ . The hood can be reverse-mounted on the lens for storage ❼ . • Part of the picture may be blocked if the hood is not attached properly. • When attaching or detaching the hood, grasp the base of the hood to turn it. To prevent deformation, do not grasp the rim of the hood to turn it. 5.
Ca. . . on 1 11 Garantie limitee des appareils photo nymeriques EOS Digital CameraMC et des accessoires de CANONE Pour les Etats-Unis et le Canada seulement La presente garantie limitee est fournie par Canon U.S.A., Inc. (Canon U.S.A.) aux Etats-Unis ou Canon Canada Inc.
Canon CANON~EOS Digital Camera™ and Accessories Limited Warranty-For U.S.A. & Canada Only The limited warranty set forth below is given by Canon U.S.A., Inc. (Canon U.S.A.) in the United States or Canon Canada Inc. (Canon Canada) in Canada with respect to the Canon brand EOS Digital Camera, as well as with respect to the accessories packaged with this limited warranty (collectively the "Products")*, when purchased and used in the United States or Canada.
Canon CANON LIMITED WARRANTY CANON U.S.A., INC. CANON CANADA;INC. NAME NOM ADDRESS ADRESSE CITY VILLE POSTAL CODE CODE POSTAL PROVINCE THESE ARE NOT REGISTRATION CARDS - Retain for your Records CES CARTES NE SONT PAS GELLES POUR L:ENREGISTREMENT. - Les conserver comme reference. DEALER'S NAME & ADDRESS MARCHAND NOM & ADRESSE PURCHASE DATE DATE D'ACHAT I BODY NO. / BOlTIER NO MODEL/ MODELE EOS REBEL T7 112072028676 EF-S18-55/3.5-5.
Canon Dealer Record of Canon Purchase Fiche d'Achat pour Concessiionnaire Canon Complete this card at time of sale.
Register Your EOS Camera Now Visit www.canon.ca/register ENJOY THE BENEFITS OF REGISTERING • Receive automatic notification of the most up to date driver, firmware and software upgrades. • Receive the latest product and promotion information from Canon Canada Inc. • As a valued customer, you will receive important information relating specifically to your product. Register Your EOS Camera Now Visit www.registercanon.
Where imagination shapes innovation Ask questions, have conversations and share experiences / ~ of 11 Become a fan the official Canon Facebook page C A @ ' FOR@)} Taking professional imaging products to the next level I Canon Online Store Get Everything Canon. Directly from Canon Learn more about Canon and exciting ·• career opportunities '-, a tm Visit our online store for the latest in Canon products and deals. EXPLORE. LEARN. CREATE.