User's Manual

ManualsBrandsCanon ManualsCamera LensCanon 2045B002

EF14mm f/2.8L II USM

Instruction

ENG

COPY

Summary of content (10 pages)

PAGE 1
EF14mm f/2.
PAGE 2
Thank you for purchasing a Canon product. The Canon EF14mm f/2.8L II USM is a highperformance super wide-angle lens designed for EOS cameras. ¡“USM” stands for Ultrasonic Motor. C Features 1. Aspherical and UD lens elements result in outstanding image delineation. 2. Ultrasonic motor (USM) for fast, quiet focusing. 3. Manual focusing is available after the subject comes into focus in autofocus mode (ONE SHOT AF). 4. Close-up photography up to 0.2 m/0.7 ft. 5.
PAGE 3
a Safety Precautions a Safety Precautions • Do not look at the sun or a bright light source through the lens or camera. Doing so could result in loss of vision. Looking at the sun directly through the lens is especially hazardous. • Whether it is attached to the camera or not, do not leave the lens under the sun without the lens cap attached. This is to prevent the lens from concentrating the sun’s rays, which could cause a fire. Handling Cautions C This device complies with Part 15 of the FCC Rules.
PAGE 4
Nomenclature Distance scale (→ 5, 6) Built-in lens hood Infrared index (→ 6) Depth-of-Field scale (→ 6) C Focusing ring (→ 5) Focus mode switch (→ 5) Y P O Distance index (→ 5) Gelatin filter holder (→ 7) Contacts (→ 4) Lens mount index (→ 4) For detailed information, reference page numbers are provided in parentheses (→ **).
PAGE 5
1. Mounting and Detaching the Lens See your camera’s instructions for details on mounting and detaching the lens. ¡After detaching the lens, place the lens with the rear end up to prevent the lens surface and electrical contacts from getting scratched. ¡If the contacts get soiled, scratched, or have fingerprints on them, corrosion or faulty connections can result. The camera and lens may not operate properly. ¡If the contacts get soiled or have fingerprints on them, clean them with a soft cloth.
PAGE 6
2. Setting the Focus Mode 3. Infinity Compensation Mark Infinity compensation mark Distance index Y P O To shoot in autofocus mode, set the focus mode switch to AF. To use only manual focusing, set the focus mode switch to MF, and focus by turning the focusing ring. The focusing ring always works, regardless of the focus mode. C After autofocusing in ONE SHOT AF mode, focus manually by pressing the shutter button halfway and turning the focusing ring.
PAGE 7
4. Infrared Index 5. Depth-of-Field Scale Y P O The infrared index corrects the focus setting when using monochrome infrared film. Focus on the subject manually, then adjust the distance setting by moving the focusing ring to the corresponding infrared index mark. C Some EOS cameras cannot use infrared film. See the instructions for your EOS camera. ¡The infrared index position is based on a wavelength of 800 nm. ¡Be sure to observe the manufacturer’s instructions when using infrared film.
PAGE 8
6. Filter Holder Y P O There is a gelatin filter holder at the rear of the lens. Cut the gelatin filter to fit within the white frames. Then insert the gelatin filter into the filter holder. C ¡Only one filter can be used. ¡When you use a gelatin filter, ghosting may appear in the image.
PAGE 9
Specifications Image Size Focal Length/Aperture Lens Construction Minimum Aperture Angle of View Min. Focusing Distance Max. Magnification Field of View Filter Hood Case Max. Diameter and Length Weight 24 × 36 mm 14 mm f/2.8 11 groups, 14 elements f/22 Diagonal: 114° Vertical: 81° Horizontal: 104° 0.2 m / 0.7 ft. 0.15 × 162 × 250 mm / 6.4 × 9.8 inch (at 0.2 m) Insert Built-in LP1016 80 × 94 mm / 3.1 × 3.7 inch 645 g / 22.