Instruction Manual Instruction manuals (PDF files) and software can be downloaded from the Canon website (p.4, 489). www.canon.
Introduction The EOS 77D is a digital single-lens reflex camera featuring a finedetail CMOS sensor with approx. 24.2 effective megapixels, DIGIC 7, high-precision and high-speed 45-point AF (up to 45 cross-type AF points), maximum continuous shooting speed of approx. 6.0 shots/sec., Live View shooting, Full High-Definition (Full HD) movie shooting, and Wi-Fi/NFC/Bluetooth (wireless communication) function.
Item Check List Before starting, check that all the following items are included with your camera. If anything is missing, contact your dealer. Camera (with eyecup and body cap) Strap Battery Pack LP-E17 Battery Charger LC-E17E* (with protective cover) * Battery Charger LC-E17E comes with a power cord. The camera does not come with the Software CD-ROM, an interface cable or HDMI cable. The Instruction Manuals are listed on the next page.
Instruction Manuals Quick Reference Guide The booklet is the Quick Reference Guide. More detailed Instruction Manuals (PDF files) can be downloaded from the Canon website. Downloading and Viewing the Instruction Manuals (PDF Files) 1 Download the Instruction Manuals (PDF files). Connect to the Internet and access the following Canon website. www.canon.com/icpd Select your country or region of residence and download the Instruction Manuals.
Instruction Manuals The Instruction Manuals (PDF files) can also be downloaded using the QR code. www.canon.com/icpd A software application is required to read out the QR code. Select your country or region of residence, then download the Instruction Manuals. The QR code can also be displayed under [54: Manual/software URL].
Quick Start Guide Insert the battery (p.40). 1 Upon purchase, charge the battery to start using (p.38). Insert the card (p.41). 2 3 With the card’s label facing toward the back of the camera, insert it into the card slot. White index Red index Attach the lens (p.51). Align the lens’s white or red mount index with the camera’s mount index of the same color to attach the lens. 4 Set the lens’s focus mode switch to (p.51).
Quick Start Guide 6 Flip out the LCD monitor (p.44). 7 Focus on the subject (p.54). 8 Take the picture (p.54). 9 Review the picture. When the LCD monitor displays the date/time/zone setting screen, see page 47. Look through the viewfinder and aim the viewfinder center over the subject. Press the shutter button halfway, and the camera will focus on the subject. The built-in flash will be raised as necessary. Press the shutter button completely to take the picture.
Compatible Cards The following cards can be used with the camera regardless of capacity. If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera (p.74). SD/SDHC*/SDXC* memory cards * UHS-I cards supported. Cards that Can Record Movies When shooting movies, use a large-capacity card with a reading/writing speed class at least as high as shown in the following table. Movie Recording Size (p.
Chapters Introduction 1 2 3 4 5 6 7 8 9 10 11 12 13 14 2 Getting Started and Basic Camera Operations 37 Basic Shooting and Image Playback 83 Setting the AF and Drive Modes 123 Image Settings 151 Advanced Operations for Photographic Effects 189 Flash Photography 215 Shooting with the LCD Monitor (Live View Shooting) 241 Shooting Movies 275 Handy Features 323 Image Playback 345 Post-Processing Images 391 Customizing the Camera 399 Reference 419 Software Start Guide / Downloading I
Contents by Purpose Shooting Shoot automatically p.83-120 (Basic Zone modes) Shoot continuously p.147 (i Continuous shooting) Take a picture of yourself in a group p.149 (j Self-timer) Freeze the action Blur the action p.192 (s Shutter-priority AE) Blur the background p.90 (C Creative Auto) Keep the background in sharp focus p.194 (f Aperture-priority AE) Adjust the image brightness (exposure) p.205 (Exposure compensation) Shoot in low light p.
Take many pictures p.152 (7a, 8a, b) AF (Focusing) Change the AF area selection mode p.129 (S AF area selection mode) Shoot a moving subject p.100, 103, 126 (AI Servo AF) Playback View the images on the camera p.121 (x Playback) Search for pictures quickly p.346 (H Index display) p.347 (I Image browsing) Rate images p.353 (Ratings) Prevent important images from accidental deletion p.372 (K Image protect) Delete unnecessary images p.
Index to Features Power Battery • Charging • Installing/Removing • Battery level • Checking battery information Recording Images p.38 p.40 p.46 p.421 Creating/Selecting a folder p.327 File numbering p.329 AF AF operation p.124 Household power outlet p.422 AF area selection mode p.129 Auto power off AF point selection p.131 Lens group p.137 Manual focusing p.146 p.45 Cards Installing/Removing p.41 Formatting p.
Index to Features Shooting Movie Shooting Shooting mode p.30 Movie shooting p.275 ISO speed p.158 AF method p.259 Aspect ratio p.156 Movie recording size p.287 Bulb p.199 Movie Servo AF p.315 Bulb timer p.201 Sound recording p.313 Interval timer p.211 Manual exposure p.280 Metering mode p.203 Digital zoom p.290 Mirror lockup p.209 HDR movie shooting p.291 Remote control p.423 Creative filters for movies p.
Index to Features Image Editing Creative filters p.392 Resizing p.395 Cropping p.397 Customization Custom Functions (C.Fn) p.400 My Menu p.413 Software Software Start Guide p.488 Software Instruction Manual p.
Conventions Used in this Manual Icons in this Manual <6> : Indicates the Main Dial. <5> : Indicates the Quick Control Dial. : Indicates the direction of the shift or move when the key on the Quick Control Dial is pressed. <0> : Indicates the Setting button. 0/9/7/8 : Indicates that each function remains active for approx. 4 sec., 6 sec., 10 sec., or 16 sec. after you let go of the button.
Contents Introduction 2 Item Check List................................................................................. 3 Instruction Manuals .......................................................................... 4 Quick Start Guide ............................................................................. 6 Compatible Cards............................................................................. 8 Chapters........................................................................................
Contents 2 Basic Shooting and Image Playback 83 A Fully Automatic Shooting (Scene Intelligent Auto) ...................84 A Full Auto Techniques (Scene Intelligent Auto)..........................87 7 Shooting When You Cannot Use Flash ....................................89 C Creative Auto Shooting.............................................................90 2 Shooting Portraits ...................................................................... 97 3 Shooting Landscapes .............................
Contents 4 Image Settings 151 Setting the Image-Recording Quality ........................................... 152 Changing the Image’s Aspect Ratio ............................................. 156 g: Setting the ISO Speed for Still Photos ................................. 158 A Selecting a Picture Style ...................................................... 161 A Customizing a Picture Style ................................................. 164 A Registering a Picture Style .............................
Contents Wireless Flash Photography ......................................................... 229 Easy Wireless Flash Photography ................................................232 Custom Wireless Flash Photography............................................ 235 7 Shooting with the LCD Monitor (Live View Shooting) 241 A Shooting with the LCD Monitor ............................................... 242 Shooting Function Settings ...........................................................
Contents Creating and Selecting a Folder ................................................ 327 File Numbering Methods............................................................ 329 Setting the Copyright Information .............................................. 332 Auto Rotation of Vertical Images ............................................... 334 Reverting the Camera to the Default Settings ........................... 335 Disabling the Auto Turn Off of the LCD Monitor ........................
Contents 11 Post-Processing Images 391 U Applying Creative Filter Effects ............................................... 392 S Resizing JPEG Images ...........................................................395 N Cropping JPEG Images...........................................................397 12 Customizing the Camera 399 Setting Custom Functions............................................................. 400 Custom Function Setting Items.....................................................
Safety Precautions The following precautions are provided to prevent harm or injury to yourself and others. Make sure to thoroughly understand and follow these precautions before using the product. If you experience any malfunctions, problems, or damage to the product, contact the nearest Canon Service Center or the dealer from whom you purchased the product. Warnings: Follow the warnings below. Otherwise, death or serious injuries may result.
Safety Precautions When the camera or accessories are not in use, make sure to remove the battery, and disconnect the power plug and connecting cables from the equipment before storing. This is to prevent electrical shock, excessive heat, fire, and corrosion. Do not use the equipment where there is flammable gas. This is to prevent an explosion or a fire. If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the exposed internal parts.
Safety Precautions Cautions: Follow the cautions below. Otherwise, physical injury or property damage may result. Do not use or store the product in a high-temperature location such as inside a car under the hot sun. The product may become hot and cause burns. Doing so may also cause battery leakage or explosion, which will degrade the performance or shorten the life of the product. Do not carry the camera around when it is attached to a tripod. Doing so may cause an injury or an accident.
Handling Precautions Camera Care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult the nearest Canon Service Center. Wipe off any water droplets with a dry and clean cloth. If the camera has been exposed to salty air, wipe it with a clean, well-wrung wet cloth.
Handling Precautions If condensation forms on the camera, do not use the camera. This is to avoid damaging the camera. If there is condensation, remove the lens, card and battery from the camera, and wait until condensation has evaporated before using the camera. If the camera will not be used for an extended period, remove the battery and store the camera in a cool, dry, well-ventilated location.
Handling Precautions Cards To protect the card and its recorded data, note the following: Do not drop, bend, or wet the card. Do not subject it to excessive force, physical shock, or vibration. Do not touch the card’s electronic contacts with your fingers or anything metallic. Do not affix any stickers, etc., on the card. Do not store or use the card near anything that has a strong magnetic field, such as a TV set, speakers, or magnets. Also avoid places prone to having static electricity.
Nomenclature Built-in flash/AF-assist beam emitter (p.216/127) EF lens mount index (p.51) Flash sync contacts Focal plane mark (p.99) Hot shoe (p.221) LCD panel (p.33) EF-S lens mount index (p.51) AF area selection button (p.130) Flash button (p.216) ISO speed setting button (p.158) Mode Dial lock-release button (p.55) <6> Main Dial (p.55) Mode Dial (p.30) LCD panel illumination button (p.58) Strap mount (p.37) Shutter button (p.54) Speaker (p.
Nomenclature Dioptric adjustment knob (p.53) Live View shooting/Movie shooting button (p.242/276) Display-off sensor (p.76, 338) Quick Control button (p.65) AF start button (p.54, 124, 244, 285) Viewfinder eyepiece Eyecup (p.427) AE lock/FE lock button/Index/Reduce button (p.208/219/346, 349) Info button (p.76, 121, 245, 282, 420) AF point selection/Magnify button (p.131/349) Power switch (p.45) Menu button (p.67) Wi-Fi button LCD monitor/ Touch screen (p.
Nomenclature Mode Dial You can set the shooting mode. Turn the Mode Dial while holding down the Mode Dial center (Mode Dial lock release button). Basic Zone All you do is press the shutter button. The camera sets everything to suit the subject or scene for shooting. A : Scene Intelligent Auto (p.84) 7 : Flash Off (p.89) C : Creative Auto (p.90) 2 3 4 5 : : : : Portrait (p.97) Landscape (p.98) Close-up (p.99) Sports (p.100) 8: Special scene (p.101) q Group Photo (p.102) C Kids (p.103) P Food (p.
Nomenclature Creative Zone These modes give you more control for shooting various subjects as desired. d s f a : Program AE (p.190) : Shutter-priority AE (p.192) : Aperture-priority AE (p.194) : Manual exposure (p.
Nomenclature Quick Control Screen (Example in the mode with [s: Shooting screen: Standard] set (p.65)) Shutter speed Multi function lock warning (LOCK) (p.57) Exposure level indicator Exposure compensation amount (p.205) AEB range (p.206) Multi function lock warning (LOCK) (p.57) Aperture Multi function lock warning (LOCK) (p.57) Auto Lighting Optimizer (p.175) ISO speed (p.158) Highlight tone priority (p.403) Flash exposure compensation (p.218, 239) Shooting mode Picture Style (p.
Nomenclature LCD Panel ISO speed (p.158) ISO speed indicator (p.158) Interval timer shooting (p.211) Bulb timer shooting (p.201) Time-lapse movie shooting (p.296) Battery level (p.46) Highlight tone priority (p.403) Possible shots Self-timer countdown Bulb exposure time Possible shots during white balance bracketing Card error warning (Err) Error number Exposure level indicator Exposure compensation amount (p.205) AEB range (p.
Nomenclature Viewfinder Information Spot metering circle (p.203) Focusing screen Large Zone AF frame (p.129) AF point (p.129) Grid (p.80) Area AF frame (p.129) Aspect ratio line (p.156) Flicker detection (p.81, 185) Electronic level (p.79) Warning icon (p.407) ISO speed indicator (p.158) Focus indicator AE lock (p.208) AEB in-progress (p.206) Flash-ready (p.216, 221) Improper FE lock warning High-speed sync (p.227) FE lock (p.
Nomenclature Battery Charger LC-E17E Charger for Battery Pack LP-E17 (p.38).
1 Getting Started and Basic Camera Operations This chapter describes preparatory steps before you start shooting and the basic camera operations. Attaching the Provided Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle. The eyepiece cover is also attached to the strap (p.427).
Charging the Battery 1 Remove the protective cover. Detach the protective cover provided with the battery. the battery. 2 Attach As shown in the illustration, attach the battery securely to the charger. To detach the battery, follow the above procedure in reverse. LC-E17E the battery. 3 Recharge Connect the power cord to the charger and insert the plug into a power outlet. Recharging starts automatically and the charge lamp lights up in orange.
Charging the Battery Tips for Using the Battery and Charger Upon purchase, the battery is not fully charged. Charge the battery before use. Recharge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually drain and lose its capacity. After recharging the battery, detach it and disconnect the charger from the power outlet. When not using the camera, remove the battery.
Installing and Removing the Battery Load a fully charged Battery Pack LP-E17 into the camera. The camera’s viewfinder becomes bright when a battery is installed, and darkens when the battery is removed. If the battery is not installed, the image in the viewfinder becomes blurred and you cannot perform focusing. Installing the Battery 1 Open the cover. Slide the lever as shown by the arrows and open the cover. the battery. 2 Insert Insert the end with the electrical contacts.
Installing and Removing the Card You can use an SD, SDHC, or SDXC memory card (sold separately) with the camera. SDHC and SDXC memory cards with UHS-I can also be used. The captured images are recorded onto the card. Make sure the card’s write-protect switch is set upward to enable writing and erasing. Installing the Card 1 Write-protect switch Open the cover. Slide the cover as shown by the arrows to open it. the card.
Installing and Removing the Card The number of possible shots varies depending on the remaining capacity of the card, image-recording quality, ISO speed, etc. Setting [z1: Release shutter without card] to [Disable] will prevent you from shooting without a card, forgetting to install it (p.324). Removing the Card 1 Access lamp Open the cover. Set the power switch to <2>. Check that the access lamp is off, then open the cover. If [Recording...] is displayed, close the cover. the card.
Installing and Removing the Card When the access lamp is lit or blinking, it indicates that images are being written to, read from, or erased from the card, or data is being transferred. Do not open the card slot cover during this time. Also, never do any of the following while the access lamp is lit or blinking. Otherwise, it can damage the image data, card, or camera. • Removing the card. • Removing the battery. • Shaking or banging the camera around.
Using the LCD Monitor After you flip out the LCD monitor, you can set menu functions, use Live View shooting, shoot movies, or play back photos and movies. You can change the direction and angle of the LCD monitor. 1 Flip out the LCD monitor. the LCD monitor. 2 Rotate When the LCD monitor is swung out, 180° 90° 175° you can rotate it up, down, or over 180° to face the subject. The indicated angle is only approximate. it toward you. 3 Face Normally, use the camera with the LCD monitor facing you.
Turning on the Power If you turn on the power switch and the date/time/zone setting screen appears, see page 47 to set the date/time/zone. : The camera turns on. You can shoot movies (p.276). <1> : The camera turns on. You can shoot still photos. <2> : The camera is turned off and does not function. Set the power switch to this position when not using the camera. Automatic Sensor Cleaning Whenever you set the power switch to <1> or <2>, sensor cleaning will be performed automatically.
Turning on the Power V Battery Level Indicator When the power is turned on, the battery level will be indicated in one of the four levels. V b v m : Battery level is sufficient. : Battery level is low, but the camera can still be used. : Battery will be exhausted soon. (Blinks) : Recharge the battery. Number of Possible Shots with Viewfinder Shooting Temperature Room Temperature (23°C / 73°F) Low Temperatures (0°C / 32°F) No Flash Approx. 820 shots Approx. 770 shots 50% Flash Use Approx.
3 Setting the Date, Time, and Zone When you turn on the power for the first time or if the date/time/zone have been reset, the date/time/zone setting screen will appear. Follow the steps below to set the time zone first. Set the camera to the time zone in which you currently live so that, when you travel, you can simply change the setting to the correct time zone for your destination, and the camera will automatically adjust the date/time.
3 Setting the Date, Time, and Zone Press <0> again. Press the keys to select the time zone, then press <0>. If your desired time zone is not listed, press the button, then proceed to the next step to set it (with the time difference from the Coordinated Universal Time, UTC). To set the time difference from UTC, press the keys to select a parameter (+/-/hour/minute) for [Time difference]. Press <0> so is displayed. Press the keys to set it, then press <0>.
3 Setting the Date, Time, and Zone the daylight saving time. 5 Set Set it if necessary. Press the keys to select [Y]. Press <0> so is displayed. Press the keys to select [Z], then press <0>. When the daylight saving time is set to [Z], the time set in step 4 will advance by 1 hour. If [Y] is set, the daylight saving time will be canceled and the time will go back by 1 hour. the setting. 6 Exit Press the keys to select [OK], then press <0>.
3 Selecting the Interface Language 1 Display the menu screen. Press the button to display the menu screen. the [52] tab, select 2 Under [LanguageK]. Press the button and select the [5] tab. Press the keys to select the [52] tab. Press the keys to select the [LanguageK], then press <0>. the desired language. 3 Set Press the keys to select the language, then press <0>. The interface language will change.
Attaching and Detaching a Lens The camera is compatible with all Canon EF and EF-S lenses. Note that you cannot use the EF-M lenses. Attaching a Lens 1 Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows. the lens. 2 Attach Align the lens’s red or white index White index with the camera’s index matching the same color. Turn the lens as shown by the arrow until it clicks in place. Red index the lens’s focus mode switch 3 Set to .
Attaching and Detaching a Lens Zooming Turn the zoom ring on the lens with your fingers. If you want to zoom, do it before focusing. Turning the zoom ring after achieving focus may throw off the focus. Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrow. Turn the lens until it stops, then detach it. Attach the rear lens cap to the detached lens. Do not look at the sun directly through any lens. Doing so may cause loss of vision.
Basic Shooting Operations Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. Turn the knob left or right so that the AF points in the viewfinder look sharp. If the knob is difficult to turn, remove the eyecup (p.427). If the camera’s dioptric adjustment still cannot provide a sharp viewfinder image, using E-series Dioptric Adjustment Lenses (sold separately) is recommended. Holding the Camera To obtain sharp images, hold the camera still to minimize camera shake.
Basic Shooting Operations Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing Halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed in the viewfinder and on the LCD panel (0). Pressing Completely This releases the shutter and takes the picture.
Basic Shooting Operations Mode Dial Turn the dial while holding down the lock release button at the center of the dial. Use it to set the shooting mode. 6 Main Dial (1) After pressing a button, turn the <6> dial. After pressing a button such as , turn the <6> dial to change the setting. For the button, the function remains selected for approx. 6 sec. (9) after pressing the button.
Basic Shooting Operations 5 Quick Control Dial (1) After pressing a button, turn the <5> dial. After pressing a button such as , turn the <5> dial to change the setting. For the button, the function remains selected for approx. 6 sec. (9) after pressing the button. When the timer ends or if you press the shutter button halfway, the camera will go back to shooting-ready state.
Basic Shooting Operations R Multi Function Lock With [54: Multi function lock] set and the switch set upward, you can prevent the settings from being changed by accidentally operating Main Dial or Quick Control Dial or by inadvertently tapping on the touch screen. switch set downward: Lock released switch set upward: Lock engaged 1 Select [Multi function lock]. Under the [54] tab, select [Multi function lock], then press <0>. a checkmark [X] to the 2 Add camera control to be locked.
Basic Shooting Operations U LCD Panel Illumination You can illuminate the LCD panel by pressing the button. Turn on (9) or off the LCD panel illumination by pressing the button. During a bulb exposure, pressing the shutter button completely will turn off the LCD panel illumination. Displaying the Quick Control Screen After you press the button a number of times, the Quick Control screen will appear. You can then check the current shooting function settings.
3 Setting the Screen Display Level You can set how information is displayed on the screen according to your preference. Change the settings as necessary. 1 Display the menu screen. Press the button to display the menu screen. the [s] tab. 2 Select Press the button and select the [s] tab. Shooting Screen You can select [Standard] or [Guided] (friendly display) for the Quick Control screen in viewfinder shooting. By default, it is set to [Standard]. 1 Select [Shooting screen].
3 Setting the Screen Display Level Sample Screens : Standard : Guided : Standard : Guided In Creative Zone modes, when [Guided] is set, only the functions particular to the set shooting mode are displayed on the Quick Control screen. Note that items that cannot be set from the Quick Control screen when [Guided] is selected can be set via the menu screen (p.68).
3 Setting the Screen Display Level Menu Display You can select the display method from [Standard] or [Guided]. If you set [Guided], main tab descriptions are provided when you press the button. If you set [Standard], you proceed directly to the menu screen when you press the button. By default, it is set to [Standard]. 1 Select [Menu display]. 2 Select the display method. Main tabs When [Guided] is set, the [9 (My Menu)] tab does not appear. To set My Menu (p.
3 Setting the Screen Display Level Shooting Mode Guide You can display the description of the shooting mode (mode guide) when switching the shooting mode during viewfinder shooting. By default, it is set to [Enable]. 1 Select [Mode guide]. 2 Select [Enable]. the Mode Dial. 3 Turn A description of the selected shooting mode will appear. the key. 4 Press The rest of the description will appear. When you press <0>, the description will disappear and the Quick Control screen will appear.
3 Setting the Screen Display Level Feature Guide When using Quick Control or setting menu items, you can display a brief description of functions and options (feature guide). By default, it is set to [Enable]. 1 Select [Feature guide]. 2 Select [Enable]. Sample Screens Quick Control screen Menu screen Feature guide The description will disappear when you tap on it or proceed with the operation.
3 Setting the Screen Display Level Shooting Tips Shooting tips appear when [Shooting screen] is set to [Guided] (p.59) and the camera setting is in any of the following cases. In Basic Zone modes, shooting tips appear regardless of the [Shooting screen] setting. • To further blur the background (with the lowest aperture value set in the mode). • The image is likely to be overexposed. • The image is likely to be underexposed. • Camera shake is likely to occur (only in Basic Zone modes).
Q Quick Control for Shooting Functions You can directly select and set the shooting functions displayed on the LCD monitor with intuitive operations. This is called Quick Control. 1 Press the button (7). The Quick Control screen will appear. the desired functions. 2 Set Press the or keys to select a function. The settings of the selected function and Feature guide (p.63) will appear. Turn the <6> or <5> dial to change the setting.
Q Quick Control for Shooting Functions Sample Quick Control Screen When [s: Shooting screen: Standard] is Set Aperture (p.194) Shutter speed (p.192) Shooting mode* (p.30) Highlight tone priority* (p.403) Exposure compensation/ AEB setting (p.205/206) ISO speed (p.158) Flash exposure compensation (p.218) Picture Style (p.161) Built-in flash settings (p.226) AF operation (p.124) Image-recording quality (p.152) Return White balance (p.169) AF area selection mode (p.130) White balance correction (p.
3 Menu Operations and Configurations You can configure various settings with the menus such as the imagerecording quality, date/time, etc. button <0> button Quick Control Dial keys LCD monitor Menu Screen The menu tabs and items displayed vary depending on the shooting mode.
3 Menu Operations and Configurations Menu Setting Procedure When [s: Menu display: Standard] is Set 1 Display the menu screen. Press the button to display the menu screen. a tab. 2 Select Each time you press the button, the main tab (group of functions) will switch. Press the Quick Control Dial’s keys to select a secondary tab. For example, in this manual, the [z3] tab refers to the screen displayed when the z (Shooting) tab’s [3] is selected. the desired item.
3 Menu Operations and Configurations the setting. 6 Exit Press the button to exit the menu and return to shooting-ready state. In step 2, you can also turn the <6> dial to select a menu tab. In step 4, you can also turn the <5> dial to select certain settings. In steps 2 to 6, you can also tap on the LCD monitor to perform the operation (p.71). The description of menu functions hereafter assumes that you have pressed the button to display the menu screen.
3 Menu Operations and Configurations a secondary tab. 4 Select Press the Quick Control Dial’s keys to select a secondary tab. For example, in this manual, the [z3] tab refers to the screen displayed when the z (Shooting) tab’s [3] is selected. The subsequent operations are the same as those for [s: Menu display: Standard]. See the steps on page 68, starting with step 3. To exit the setting, press the button twice.
d Operating the Camera with Touch Screen You can operate the camera by tapping on the LCD monitor (touchsensitive panel) with your fingers. Tap Sample Screen (Quick Control) Use your finger to tap on (touch briefly and then remove your finger from) the LCD monitor. By tapping, you can select menus, icons, etc., displayed on the LCD monitor. For example, when you tap on [Q], the Quick Control screen appears. By tapping on [Q], you can return to the preceding screen.
d Operating the Camera with Touch Screen Drag Sample Screen (Menu screen) Slide your finger while touching the LCD monitor.
d Operating the Camera with Touch Screen 3 Setting the Touch Control Response 1 Select [Touch control]. Under the [53] tab, select [Touch control], then press <0>. the touch control response 2 Set setting. Select the desired setting, then press <0>. [Standard] is the normal setting. [Sensitive] provides a more reactive touch screen response than [Standard]. Try using both settings and select the one you prefer. To disable touch operations, select [Disable].
3 Formatting the Card If the card is new or was previously formatted by another camera or computer, format the card with this camera. When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images and data to a computer, etc., before formatting the card. 1 Select [Format card]. Under the [51] tab, select [Format card], then press <0>. the card.
3 Formatting the Card Execute [Format card] in the following cases: The card is new. The card was formatted by a different camera or a computer. The card is full of images or data. A card-related error is displayed (p.467). Low-level Formatting Perform low-level formatting if the card’s recording or reading speed seems slow or if you want to totally erase the data on the card.
Switching the LCD Monitor Display The LCD monitor can display the Quick Control screen, menu screen, captured images, etc. When you turn on the power, the Quick Control screen will appear. You can then check the current shooting function settings. When your eye is near the viewfinder, the display-off sensor (p.29, 338) will turn off the LCD monitor to prevent glare. When your eye leaves the viewfinder, the LCD monitor will turn on again.
Switching the LCD Monitor Display Under [52: LCD auto off], you can prevent the LCD monitor from turning off automatically (p.338). Even when the menu screen or captured image is displayed, pressing the shutter button will enable you to shoot immediately. If you look through the viewfinder eyepiece while wearing sunglasses, the LCD monitor may not turn off automatically. If this occurs, press the button to turn off the LCD monitor.
3 Displaying the Electronic Level You can display the electronic level on the LCD monitor and in the viewfinder to help you correct the camera tilt. Note that you can check only the horizontal tilt and not the forward/backward tilt. Displaying the Electronic Level on the LCD Monitor 1 Press the button. Each time you press the button, the screen display will change. Display the electronic level.
3 Displaying the Electronic Level Displaying the Electronic Level in the Viewfinder A simple electronic level using a camera icon can be displayed in the viewfinder. Since this indicator is displayed during shooting, you can take the picture while checking the camera tilt. 1 Select [Viewfinder display]. Under the [52] tab, select [Viewfinder display], then press <0>. 2 Select [Electronic level]. 3 Select [Show]. the shutter button halfway.
3 Displaying the Grid You can display a grid in the viewfinder to help you check the camera tilt or compose the shot. 1 Select [Viewfinder display]. Under the [52] tab, select [Viewfinder display], then press <0>. 2 Select [Grid display]. [Show]. 3 Select When you exit the menu, the grid will appear in the viewfinder. You can display a grid on the LCD monitor during Live View shooting and before you start shooting a movie (p.255, 317).
3 Displaying the Flicker DetectionN If you set this function, will appear in the viewfinder when the camera detects flicker caused by the blinking of the light source. By default, flicker detection is set to [Show]. 1 Select [Viewfinder display]. Under the [52] tab, select [Viewfinder display], then press <0>. 2 Select [Flicker detection]. 3 Select [Show]. If you set [z5: Anti-flicker shoot.] to [Enable], you can shoot with reduced unevenness of exposure caused by the flicker (p.185).
2 Basic Shooting and Image Playback This chapter describes how to use the Basic Zone modes on the Mode Dial for best results and how to play back images. With Basic Zone modes, all you do is point and shoot, and the camera sets everything automatically (p.118, 430). Also, because advanced shooting function settings cannot be changed, you can enjoy shooting photographs without worrying about botched pictures due to misoperation.
A Fully Automatic Shooting (Scene Intelligent Auto) is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. It can also adjust focus automatically on either the still or moving subject by detecting the motion of the subject (p.87). 1 Area AF frame Set the Mode Dial to . Turn the Mode Dial while holding down the lock release button at the center. the Area AF frame over the 2 Aim subject.
A Fully Automatic Shooting (Scene Intelligent Auto) the picture. 4 Take Press the shutter button completely to take the picture. The captured image will be displayed for approx. 2 sec. on the LCD monitor. When you finish shooting, push down the built-in flash with your fingers. The mode makes the colors look more impressive in nature, outdoor, and sunset scenes.
A Fully Automatic Shooting (Scene Intelligent Auto) The beeper continues to beep softly. (The focus indicator does not light up.) It indicates that the camera is focusing continuously on a moving subject. (The focus indicator does not light up.) You can take sharp pictures of a moving subject. Note that focus lock (p.87) will not work in this case. Pressing the shutter button halfway does not focus on the subject.
A Full Auto Techniques (Scene Intelligent Auto) Recomposing the Shot Depending on the scene, positioning the subject toward the left or right to include a balanced background will result in a picture with better perspective. In the mode, pressing the shutter button halfway to focus on a still subject will lock the focus on that subject. Recompose the shot while keeping the shutter button pressed halfway, and then press the shutter button completely to take the picture. This is called “focus lock”.
A Full Auto Techniques (Scene Intelligent Auto) A Live View Shooting You can shoot while viewing the image on the LCD monitor. This is called “Live View shooting”. For details, see page 241. 1 Display the Live View image on the LCD monitor. Press the button. The Live View image will appear on the LCD monitor. on the subject. 2 Focus Press the shutter button halfway to focus. When focus is achieved, the AF point will turn green and the beeper will sound. the picture.
7 Shooting When You Cannot Use Flash The camera analyzes the scene and sets the optimum settings automatically. In places where flash photography is prohibited such as in a museum or an aquarium, use the <7> (Flash Off) mode. Shooting Tips Prevent camera shake if the numeric display (shutter speed) in the viewfinder blinks. Under low light when camera shake is prone to occur, the viewfinder’s shutter speed display will blink. Hold the camera steady or use a tripod.
C Creative Auto Shooting In the mode, you can set the following functions for shooting: (1) Ambience-based shots, (2) Background blur, (3) Drive mode, and (4) Built-in flash firing. The default settings are the same as the mode. * CA stands for Creative Auto. 1 Set the Mode Dial to . the button (7). 2 Press The Quick Control screen will appear. the desired functions. 3 Set Press the or keys to select a function.
C Creative Auto Shooting Shutter speed Aperture ISO speed (1) (2) (4) (3) Battery level Possible shots Image-recording quality If you set (1) or (2) when the camera is set for Live View shooting, you can see the effect on the screen before you start shooting. (1) Ambience-based shots You can select and shoot with the ambience you want to convey in your images. Turn the <6> or <5> dial to select the ambience. You can also select it from a list by pressing <0>. For details, see page 94.
C Creative Auto Shooting (2) Background blur • If [OFF] is set, the degree of background blur will change depending on the brightness. • If it is set to any setting other than [OFF], you can adjust the background blur regardless of the brightness. • If you turn the <6> or <5> dial to move the cursor to the right, the background will look sharper. • Turning the <6> or <5> dial to move the cursor to the left will blur the subject’s background.
C Creative Auto Shooting (3) Drive mode: Use the <6> or <5> dial to make the selection. You can also select it from a list by pressing <0>. Single shooting: Shoot one image at a time. High-speed continuous shooting: While you hold down the shutter button completely, shots will be taken continuously. You can shoot up to approx. 6.0 shots per second. Low-speed continuous shooting: While you hold down the shutter button completely, shots will be taken continuously. You can shoot up to approx. 3.
C Creative Auto Shooting Shooting with Ambience Selection Ambience Ambience Effect 1 Ambience: Standard No setting 2 Vivid Low / Standard / Strong 3 Soft Low / Standard / Strong 4 Warm Low / Standard / Strong 5 Intense Low / Standard / Strong 6 Cool Low / Standard / Strong 7 Brighter Low / Medium / High 8 Darker Low / Medium / High 9 Monochrome Blue / B/W / Sepia 1 Display the Live View image. Press the button to display the Live View image.
C Creative Auto Shooting the ambience effect. 3 Set Press the keys to select the effect so that [Effect] appears at the bottom of the screen. Press the keys to select the desired effect. the picture. 4 Take Press the shutter button completely to take the picture. To return to viewfinder shooting, press the button to exit Live View shooting. Then press the shutter button completely to take the picture.
C Creative Auto Shooting Ambience Settings 1Ambience: Standard This provides standard image characteristics. 2 Vivid The subject looks crisp, sharp and vivid. Effective to make the picture look more impressive than with [1 Ambience: Standard]. 3 Soft The subject is less defined, giving the picture a softer and daintier look. Good for portraits, pets, flowers, etc. 4 Warm The subject is less defined with a warmer color cast, giving the picture a warmer and gentler look.
2 Shooting Portraits The <2> (Portrait) mode blurs the background to make the human subject stand out. It also makes skin tones and hair look softer. Shooting Tips Select the location where the distance between the subject and the background is the farthest. The further the distance between the subject and background, the more blurred the background will look. The subject will also stand out better against an uncluttered dark background. Use a telephoto lens.
3 Shooting Landscapes Use the <3> (Landscape) mode for wide scenery or to have everything in focus from near to far. For vivid blues and greens, and very sharp and crisp images. Shooting Tips With a zoom lens, use the wide-angle end. When using a zoom lens, set the lens to the wide-angle end to make the objects near and far in focus. It also adds breadth to landscapes. Shooting night scenes. The <3> mode is also good for night scenes because it disables the built-in flash.
4 Shooting Close-ups When you want to shoot flowers or small things up close, use the <4> (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips Use a simple background. A simple background makes small objects such as flowers stand out better. Move in as close as possible to the subject. Check the lens for its minimum focusing distance. Some lenses have indications such as <0.39m/1.3ft> on them.
5 Shooting Moving Subjects Use the <5> (Sports) mode to shoot a moving subject, such as a running person or a moving vehicle. Shooting Tips Use a telephoto lens. Use of a telephoto lens is recommended for shooting from a distance. Track the subject with the Area AF frame. Press the shutter button halfway to start autofocusing in Area AF frame. During autofocusing, the beeper will continue beeping softly. If focus cannot be achieved, the focus indicator will blink.
8: Special Scene Mode The camera will automatically choose the appropriate settings when you select a shooting mode for your subject or scene. 1 Set the Mode Dial to <8>. the button (7). 2 Press The Quick Control screen will appear. a shooting mode. 3 Select Select [Choose scene], then press <0>. Press the keys to select the desired shooting mode, then press <0>. You can also select by turning the <6> or <5> dial.
q Shooting Group Photos Use the (Group Photo) mode to shoot group photos. You can take a picture in which both the people in the front and people in the back are all in focus. Shooting Tips Use a wide-angle lens. When using a zoom lens, use the wide-angle end to make it easy to get all the people in the group in focus at once, from the front row to the back.
C Photographing Children When you want to continuously focus on and photograph children running around, use (Kids). Skin tones will look healthy. Shooting Tips Track the subject with the Area AF frame. Press the shutter button halfway to start autofocusing in Area AF frame. During autofocusing, the beeper will continue beeping softly. If focus cannot be achieved, the focus indicator will blink. Shoot continuously. The default setting is (High-speed continuous shooting*).
P Shooting Food When shooting food, use
(Food). The photo will look bright and appetizing. Also, depending on the light source, the reddish tinge will be suppressed in the pictures taken under tungsten lights, etc. Shooting Tips Change the color tone. You can change [Color tone]. To increase the food’s reddish tinge, set it toward [Warm]. Set it toward [Cool] if it looks too red. Avoid using flash. If you use flash, the light may reflect off the dish or food and results in unnatural shadows.
x Shooting Candlelight Portraits When photographing a human subject lit in candlelight, use (Candlelight). The atmosphere of candlelight is reflected in the color tones of the picture. Shooting Tips Use the center AF point to focus. Aim the center AF point in the viewfinder over the subject, then shoot. Prevent camera shake if the numeric display (shutter speed) in the viewfinder blinks. Under low light where camera shake is prone to occur, the viewfinder’s shutter speed display will blink.
6 Shooting Night Portraits (With a Tripod) To photograph people at night and obtain a natural-looking night scene in the background, use the <6> (Night Portrait) mode. Using a tripod is recommended. Shooting Tips Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Also, since camera shake is prone to occur with handheld shooting, use a tripod. Check the subject’s brightness.
F Shooting Night Scenes (Handheld) Using a tripod when shooting a night scene gives the best results. However, the (Handheld Night Scene) mode enables you to shoot night scenes even while handholding the camera. In this shooting mode, four shots are taken consecutively for each picture, and the resulting one image with reduced camera shake is recorded. Shooting Tips Hold the camera firmly. During shooting, hold the camera firmly and steadily.
G Shooting Backlit Scenes When shooting a scene having both the bright and dark areas, use the (HDR Backlight Control) mode. When you take one picture in this mode, three consecutive shots are taken at different exposures. This results in one image, with a wide tonal range, that has minimized the clipped shadows caused by backlighting. Shooting Tips Hold the camera firmly. During shooting, hold the camera firmly and steadily. In this mode, three shots are aligned and merged into a single image.
Cautions for Group Photo Since distortion correction is applied, the camera records an image range narrower than the one seen through the viewfinder. (The image periphery is slightly trimmed and the resolution looks slightly lowered.) Also, during Live View shooting, the angle of view changes slightly. Cautions for Kids During Live View shooting, if flash is fired in continuous shooting, the continuous shooting speed will decrease.
Cautions for Handheld Night Scene and HDR Backlight Control You cannot select 1+73 or 1. If 1+73 or 1 is set, the image will be recorded in 73 quality. If you shoot a moving subject, the subject’s movement may leave afterimages, or the surrounding area of the subject may become dark. The image alignment may not function properly with repetitive patterns (lattice, stripes, etc.), flat or single-tone images, or images significantly misaligned due to camera shake.
v Shooting with Creative Filter Effects In the (Creative filter) mode, you can apply one of ten filter effects (Grainy B/W*, Soft focus*, Fish-eye effect*, Water painting effect*, Toy camera effect*, Miniature effect*, HDR art standard, HDR art vivid, HDR art bold, and HDR art embossed) for shooting. When the camera is set for Live View shooting, you can see the effect on the screen before you start shooting. The camera saves only the image with the Creative filter applied.
v Shooting with Creative Filter Effects a shooting mode. 4 Select Press the keys to select a shooting mode, then press <0>. The image will be displayed with the effects of the filter applied. Available Shooting Modes in the v Mode Shooting Mode Page G Grainy B/W p.113 c Shooting Mode Page Miniature effect p.114 W Soft focus p.113 A HDR art standard p.114 X Fish-eye effect p.113 B HDR art vivid p.114 Z Water painting effect p.114 C HDR art bold p.
v Shooting with Creative Filter Effects You cannot select 1+73 or 1. If 1+73 or 1 is set, the image will be recorded in 73 quality. When , , , , , or is set, continuous shooting cannot be set. Dust Delete Data (p.341) will not be appended to images shot with Fisheye effect applied. is set to (Flash Off) by default. Try to prevent camera shake when shooting in low-light conditions.
v Shooting with Creative Filter Effects Z Water painting effect Makes the photo look like a watercolor painting with soft colors. You can control the color density by adjusting the filter effect. Note that night scenes or dark scenes may not be rendered with a smooth gradation and may look irregular or have significant noise. H Toy camera effect Darkens the photo’s corners and applies a unique color tone that makes it look as if it was shot by a toy camera.
v Shooting with Creative Filter Effects C HDR art bold The colors are the most saturated, making the subject pop out, and the picture looks like an oil painting. D HDR art embossed The color saturation, brightness, contrast and gradation are decreased to make the picture look flat. The picture looks faded and old. The subject outlines will have bolder bright (or dark) edges.
v Shooting with Creative Filter Effects Adjusting Miniature Effect 1 Move the AF point. Move the AF point to where you want to focus on. If the AF point is not fully covered by the miniature effect frame, the [r] icon on the bottom right of the screen will blink. In the next step, adjust the position of the miniature effect frame so that it covers the AF point. the miniature effect frame. 2 Move Press the button (or tap the [r] icon on the bottom right of the screen).
Q Quick Control In Basic Zone modes, press the button to display the Quick Control screen. You can set the items shown in the tables on pages 118-119. Example: the Mode Dial to a Basic Zone 1 Set mode. the button (7). 2 Press The Quick Control screen will appear. the desired functions. 3 Set Press the or keys to select a function. (This step is not necessary in the 7 mode.) The settings of the selected function and Feature guide (p.63) will appear.
Q Quick Control Settable Functions in Basic Zone Modes o: Default setting* k: User selectable Function A 7 C 2 3 4 5 u: Single shooting o k k k k k o k k o k k k k k o k k k k k o k k k k k k o k k k o k k o k k k k k k o k k k k o o k k k k k o k k k k k k G o: High-speed continuous shooting Drive mode (p.147) i: Low-speed continuous shooting Q: 10sec. l: 2sec.
Q Quick Control o: Default setting* k: User selectable Function u: Single shooting : Not selectable G o W o v X o k k k o k k k k k k o k k k k k k o k k k k k k o k k k k k k o k k k c o A o k k k k k v B o k k k k k C o k k k k k D o k k k k k o o o o Z o H o o: High-speed continuous shooting Drive mode (p.147) i: Low-speed continuous shooting Q: 10sec. l: 2sec.
Adjusting the Brightness In Basic Zone modes, when a mode other than , <7>, , <8: G>, or is set, you can adjust the brightness for shooting. You can adjust both the brightness and darkness across 3-step ranges with 0 being the standard. 1 Set the Mode Dial to <2>, <3>, <4>, <5>, or <8>. When <8> is set, set to , , , , <6>, or . the Live View image. 2 Display Press the button to display the Live View image (except ). Quick Control, select the 3 With desired brightness.
x Image Playback The easiest way to play back images is described below. For more details on the playback procedure, see page 345. 1 Play back the image. Press the button. The last image captured or played back will appear. an image. 2 Select To play back images starting with the last image captured, turn the <5> dial counterclockwise. To play back images starting with the first captured image, turn the <5> dial clockwise. Each time you press the button, the display will change.
x Image Playback the image playback. 3 Exit Press the button to exit the image playback and return to shooting-ready state. Shooting Information Display With the shooting information screen displayed (p.121), you can press the keys to change the shooting information displayed at the screen bottom as follows. For details, see pages 386-387.
3 Setting the AF and Drive Modes The AF points in the viewfinder are arranged to make AF shooting suitable for a wide variety of subjects and scenes. You can also select the AF operation and drive mode that best match the shooting conditions and subject. The O icon at the upper right of the page title indicates that the function is available only in Creative Zone modes (p.31). In Basic Zone modes, the AF operation is set automatically. stands for autofocus. stands for manual focus.
f: Changing the Autofocus OperationN You can select the AF (autofocus) operation characteristics to suit the shooting conditions or subject. In Basic Zone modes, the optimum AF operation is set automatically for the respective shooting mode. 1 Set the lens’s focus mode switch to . the Mode Dial to a Creative 2 Turn Zone mode. the button. 3 Press [AF operation] will appear. the AF operation. 4 Select Press the keys to select the desired AF operation, then press <0>. on the subject.
f: Changing the Autofocus OperationN One-Shot AF for Still Subjects Suited for still subjects. When you press the shutter button halfway, the camera will focus only once. The AF point that achieves focus is displayed, and the focus indicator in the viewfinder will also light up. With evaluative metering, the AF point exposure setting will be set at the Focus indicator same time focus is achieved. While you hold down the shutter button halfway, the focus will be locked.
f: Changing the Autofocus OperationN AI Servo AF for Moving Subjects This AF operation is suited for moving subjects when the focusing distance keeps changing. While you hold down the shutter button halfway, the camera will keep focusing on the subject continuously. The exposure is set at the moment the picture is taken. When the AF area selection mode (p.129) is set to Automatic selection AF, focus tracking will continue as long as the Area AF frame covers the subject.
f: Changing the Autofocus OperationN AF Points Lighting Up in Red By default, the AF points light up in red when focus is achieved in lowlight conditions or on a dark subject. In Creative Zone modes, you can set whether to have the AF points light up in red when focus is achieved (p.406). AF-Assist Beam with the Built-in Flash Under low-light conditions, when you press the shutter button halfway, the built-in flash may fire a brief burst of flashes. This illuminates the subject to help autofocusing.
f: Changing the Autofocus OperationN 3 Setting Lens Electronic MF With the following USM and STM lenses equipped with electronic manual focusing function, you can set whether to use electronic manual focusing in One-Shot AF mode. The default setting is [Disable after One-Shot AF]. EF-S18-135mm f/3.5-5.6 IS USM EF300mm f/2.8L USM EF1200mm f/5.6L USM EF50mm f/1.0L USM EF400mm f/2.8L USM EF28-80mm f/2.8-4L USM EF85mm f/1.2L USM EF400mm f/2.8L II USM EF70-300mm f/4-5.6 IS II USM EF85mm f/1.
S Selecting the AF Area and AF Point The camera has 45 AF points for autofocusing. You can select the AF area selection mode and AF point(s) suiting the scene or subject. Depending on the lens used, the number of usable AF points, AF point patterns, Area AF frame shape, etc. vary. For details, see “Lenses and Usable AF Points” on page 137. AF Area Selection Mode You can select one of four AF area selection modes. For the selection procedure, see the next page.
S Selecting the AF Area and AF Point Selecting the AF Area Selection Mode 1 Press the or button (9). Look through the viewfinder and press the or button. the button. 2 Press Each time you press the button, the AF area selection mode changes. In the <8: x> and modes, you cannot select the AF area. Single-point AF (fixed at center) is applied for shooting.
S Selecting the AF Area and AF Point Selecting the AF Point Manually You can manually select the AF point or zone. 1 Press the or button (9). The AF points will be displayed in the viewfinder. In the Zone AF mode or Large Zone AF mode, the selected zone will be displayed. <6> <5> an AF point. 2 Select You can select an AF point in horizontal direction with the <6> dial or vertical direction with the <5> dial. If you press <0>, the center AF point (or center zone) will be selected.
S Selecting the AF Area and AF Point AF Point Display Indications Pressing the or button lights up the AF points that are cross-type AF points for high-precision autofocusing. The blinking AF points are horizontal-line or vertical-line sensitive. For details, see pages 136-140.
AF Area Selection Modes S Single-point AF (Manual selection) Select one AF point to be used for focusing. m Zone AF (Manual selection of zone) The AF area is divided into nine focusing zones for focusing. Since all the AF points in the selected zone are used for Automatic selection AF, it is superior to Single-point AF in tracking the subject, and it is also effective for moving subjects. However, since it is inclined to focus on the nearest subject, focusing on a specific target may be more difficult.
AF Area Selection Modes o Automatic selection AF The Area AF frame (entire AF area) is used to focus. The AF point(s) achieving focus is displayed as . With One-Shot AF, pressing the shutter button halfway will display the AF point(s) that achieved focus. If multiple AF points are displayed, it means they all have achieved focus. This mode tends to focus on the nearest subject. With AI Servo AF, the manually-selected (p.131) AF point is used first to achieve focus.
AF Area Selection Modes AF Using Color Tracking By default, AF will be performed based on color tracking. However, in the <3>, <4>, <8: Px6F> and modes, AF will not be performed based on color tracking. When the AF area selection mode is set to Zone AF, Large Zone AF, or Automatic selection AF, focus is achieved as follows: In One-Shot AF Mode Focusing on a still human subject in the AF area is made easier. In AI Servo AF Mode Focusing on a human subject in the AF area is made easier.
AF Sensor The camera’s AF sensor has 45 AF points. The illustration below shows the AF sensor pattern corresponding to each AF point. When using lenses with a maximum aperture of f/2.8 or faster, high-precision AF is possible at the viewfinder center. Depending on the lens used, the number of usable AF points, AF point patterns, Area AF frame shape, etc. vary. For details, see “Lenses and Usable AF Points” on page 137. Diagram Cross-type focusing: f/5.6 vertical + f/5.
Lenses and Usable AF Points Although the camera has 45 AF points, the number of usable AF points, AF point patterns, Area AF frame shape, etc. vary depending on the lens used. The lenses are thereby classified into eight groups from A to H. Using a lens in Groups E to H will have fewer usable AF points. Lens groups are listed on pages 141-144. Check which group your lens belongs to. The number of available AF points varies depending on aspect ratio settings (p.156).
Lenses and Usable AF Points Group B Autofocusing with 45 points is possible. All the AF area selection modes are selectable. : Cross-type AF point. Subject tracking performance is superior and high-precision focusing is achieved. Group C Autofocusing with 45 points is possible. All the AF area selection modes are selectable. : Cross-type AF point. Subject tracking performance is superior and high-precision focusing is achieved. : AF points sensitive to horizontal lines.
Lenses and Usable AF Points Group E Autofocusing with the 35 points is possible. (Not possible with all 45 AF points.) All the AF area selection modes are selectable. During automatic AF point selection, the outer frame marking the AF area (Area AF frame) will be different from 45-point Automatic selection AF. : Cross-type AF point. Subject tracking performance is superior and high-precision focusing is achieved. : AF points sensitive to horizontal lines. : Disabled AF points (not displayed).
Lenses and Usable AF Points Group G Autofocusing with 27 points is possible. (Not possible with all 45 AF points.) Large Zone AF (manual selection of zone) cannot be selected in AF area selection mode. During automatic AF point selection, the outer frame marking the AF area (Area AF frame) will be different from 45-point Automatic selection AF. : Cross-type AF point. Subject tracking performance is superior and high-precision focusing is achieved. : AF points sensitive to horizontal lines.
Lenses and Usable AF Points Lens Group Designations (As of the product’s release date) EF-S24mm f/2.8 STM EF-S60mm f/2.8 Macro USM EF-S10-18mm f/4.5-5.6 IS STM EF-S10-22mm f/3.5-4.5 USM EF-S15-85mm f/3.5-5.6 IS USM EF-S17-55mm f/2.8 IS USM EF-S17-85mm f/4-5.6 IS USM EF-S18-55mm f/3.5-5.6 EF-S18-55mm f/3.5-5.6 USM EF-S18-55mm f/3.5-5.6 II EF-S18-55mm f/3.5-5.6 II USM EF-S18-55mm f/3.5-5.6 III EF-S18-55mm f/3.5-5.6 IS EF-S18-55mm f/3.5-5.6 IS II EF-S18-55mm f/3.5-5.6 IS STM EF-S18-55mm f/4-5.
Lenses and Usable AF Points EF200mm f/2.8L USM + Extender EF2x I/II/III EF200mm f/2.8L II USM EF200mm f/2.8L II USM + Extender EF1.4x I/II/III EF200mm f/2.8L II USM + Extender EF2x I/II/III EF300mm f/2.8L USM EF300mm f/2.8L USM + Extender EF1.4x I/II/III EF300mm f/2.8L USM + Extender EF2x I/II/III EF300mm f/2.8L IS USM EF300mm f/2.8L IS USM + Extender EF1.4x I/II/III EF300mm f/2.8L IS USM + Extender EF2x I/II/III EF300mm f/2.8L IS II USM EF300mm f/2.8L IS II USM + Extender EF1.4x I/II/III EF300mm f/2.
Lenses and Usable AF Points EF600mm f/4L IS II USM + Extender EF2x I/II/III EF800mm f/5.6L IS USM EF800mm f/5.6L IS USM + Extender EF1.4x I/II/III EF1200mm f/5.6L USM EF1200mm f/5.6L USM + Extender EF1.4x I/II/III EF8-15mm f/4L Fisheye USM EF11-24mm f/4L USM EF16-35mm f/2.8L USM EF16-35mm f/2.8L II USM EF16-35mm f/2.8L III USM EF16-35mm f/4L IS USM EF17-35mm f/2.8L USM EF17-40mm f/4L USM EF20-35mm f/2.8L EF20-35mm f/3.5-4.5 USM EF22-55mm f/4-5.6 USM EF24-70mm f/2.8L USM EF24-70mm f/2.
Lenses and Usable AF Points EF70-200mm f/4L USM + Extender EF1.4x I/II/III EF70-200mm f/4L USM + Extender EF2x I/II/III EF70-200mm f/4L IS USM EF70-200mm f/4L IS USM + Extender EF1.4x I/II/III EF70-200mm f/4L IS USM + Extender EF2x I/II/III EF70-210mm f/3.5-4.5 USM EF70-210mm f/4 EF70-300mm f/4-5.6 IS USM EF70-300mm f/4-5.6 IS II USM EF70-300mm f/4-5.6L IS USM EF70-300mm f/4.5-5.6 DO IS USM EF75-300mm f/4-5.6 EF75-300mm f/4-5.6 USM EF75-300mm f/4-5.6 II EF75-300mm f/4-5.6 II USM EF75-300mm f/4-5.
Subjects Difficult to Focus on Autofocus may fail to achieve focus (focus indicator in the viewfinder blinks) with special subjects such as the following: Subjects with very low contrast (Example: Blue skies, solid-color flat surfaces, etc.) Subjects in very low light Strongly backlit or reflective subjects (Example: Cars with highly reflective bodies, etc.) Near and distant subjects framed close to an AF point (Example: Animals in cages, etc.
Subjects Difficult to Focus on MF: Manual Focus the lens’s focus mode switch 1 Set to . on the subject. 2 Focus Focus by turning the lens focusing Focusing ring ring until the subject looks sharp in the viewfinder. If you press the shutter button halfway during manual focusing, the AF point that achieved focus and the focus indicator will light up in the viewfinder. With Automatic selection AF, when the center AF point achieves focus, the focus indicator will light up.
i Selecting the Drive Mode Single and continuous drive modes are provided. 1 Press the button. [Drive mode] will appear. the drive mode. 2 Select Press the keys to select the desired drive mode, then press <0>. u : Single shooting When you press the shutter button completely, only one shot will be taken. o: High-speed continuous shooting (Max. approx. 6.0 shots/sec.) When you press the shutter button completely, the camera will shoot continuously while you keep holding it down.
i Selecting the Drive Mode o: The approx. 6.0 shots/sec. maximum high-speed continuous shooting speed is achieved under the following conditions*: 1/500 sec. or faster shutter speed, maximum aperture (varies depending on the lens), flicker reduction disabled, fully charged battery pack, and at room temperature (23°C / 73°F).
j Using the Self-timer the button. 1 Press [Drive mode] will appear. the self-timer. 2 Select Press the keys to select the self-timer, then press <0>. Q: 10-sec. self-timer The remote controller can also be used (p.423). l: 2-sec. self-timer (p.93) q: 10-sec. self-timer plus continuous shots Press the keys to set the number of multiple shots (2 to 10) to be taken with the self-timer. the picture.
4 Image Settings This chapter describes image-related function settings: Image-recording quality, aspect ratio, ISO speed, Picture Style, white balance, Auto Lighting Optimizer, noise reduction, lens aberration correction, anti-flicker shooting, and other functions. The O icon at the upper right of the page title indicates that the function is available only in Creative Zone modes (p.31).
3 Setting the Image-Recording Quality You can select the pixel count and its image quality. Nine imagerecording quality settings are provided: 73, 83, 74, 84, 7a, 8a, b, 1+73, 1. 1 Select the image-recording quality. Under the [z1] tab, select [Image quality], then press <0>. [Image quality] will appear. Pixels recorded (pixel count) Possible shots the image-recording quality.
3 Setting the Image-Recording Quality Guide to Image-recording Quality Settings Image Quality 73 83 High quality 74 Medium 84 quality JPEG 7a 8a b Low quality 1+73 1 High quality Pixels Recorded 24M 11M 5.9M 3.8M 24M File Size (MB) (Approx.) Possible Shots Maximum Burst 7.6 950 190 (Full) 3.9 1840 Full (Full) 4.1 1790 Full (Full) 2.0 3480 Full (Full) 2.6 2730 Full (Full) 1.3 5260 Full (Full) Full (Full) 1.8 3810 29.4+7.6 170 19 (23) 29.
3 Setting the Image-Recording Quality FAQ I want to select the image-recording quality matching the paper size for printing. Refer to the diagram on the left when Paper size choosing the image-recording quality. If A2(59.4x42cm/23.4x16.5in.) you want to crop the image, selecting a 73 higher quality (more pixels) such as 73, A3(42x29.7cm/ 83 83, 1+73, or 1 is recommended. 1+73 16.5x11.7in.) 74 1 b is suitable for playing back the image 84 with a digital photo frame. 7a b 8a A4(29.7x21cm/11.7x8.3in.) 12.
3 Setting the Image-Recording Quality 1 1 is the raw image data before it is made into 73 or other images. 1 images cannot be viewed on a computer without the use of software, such as Digital Photo Professional (EOS software, p.488). However, you can perform various adjustments on them that are impossible with other image types such as 73. 1 is effective when you want to precisely adjust the image yourself or shoot an important subject. 1+73 1+73 records a 1 image and a 73 image with a single shot.
3 Changing the Image’s Aspect RatioN You can change the image’s aspect ratio. [3:2] is set by default. When [4:3], [16:9], or [1:1] is set, frame lines indicating the image area will be displayed in the viewfinder. During Live View shooting, the image appears with the surrounding area masked in black on the LCD monitor. 1 Select the aspect ratio. Under the [z5] tab, select [Aspect ratio], then press <0>. the aspect ratio. 2 Set Select an aspect ratio, then press <0>.
3 Changing the Image’s Aspect RatioN The table below shows the aspect ratio and the number of recorded pixels for each image-recording quality. Image Quality 3/1 Aspect Ratio and Pixel Count (Approx.) 3:2 4:3 16:9 1:1 6000x4000 5328x4000* 6000x3368* 4000x4000 (24.0 megapixels) (21.3 megapixels) (20.2 megapixels) (16.0 megapixels) 4 3984x2656 3552x2664 (10.6 megapixels) (9.5 megapixels) 3984x2240* (8.9 megapixels) 2656x2656 (7.1 megapixels) a 2976x1984 (5.9 megapixels) 2656x1992 (5.
g: Setting the ISO Speed for Still PhotosN Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In Basic Zone modes, the ISO speed is set automatically. Regarding the ISO speed during movie shooting, see pages 278 and 281. 1 Press the button (9). the ISO speed. 2 Set While looking at the LCD panel or in the viewfinder, turn the <6> or <5> dial. ISO speed can be set within ISO 100 ISO 25600. “A” indicates ISO Auto. The ISO speed will be set automatically (p.
g: Setting the ISO Speed for Still PhotosN Under [54: Custom Functions (C.Fn)], if [4: Highlight tone priority] is set to [1:Enable], ISO 100 and “H” (equivalent to ISO 51200) cannot be selected (p.403). Shooting in high temperatures may result in images that look grainier. Long exposures can also cause irregular colors in the image. When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable.
g: Setting the ISO Speed for Still PhotosN 3 Setting the Maximum ISO Speed for [AUTO]N For ISO Auto, you can set the maximum ISO speed limit within ISO 400 - ISO 25600. Under the [z2] tab, select [zISO Auto], then press <0>. Select the ISO speed, then press <0>.
A Selecting a Picture StyleN Just by selecting a preset Picture Style, you can obtain image characteristics effectively matching your photographic expression or the subject. 1 Press the button. The Picture Style selection screen will appear. a Picture Style. 2 Select Select a Picture Style, then press <0>. The Picture Style will be set. You can also set the Picture Style with [z3: Picture Style].
A Selecting a Picture StyleN Q Portrait For nice skin tones. The image looks softer. Suited for close-up portraits. By changing the [Color tone] (p.165), you can adjust the skin tone. R Landscape For vivid blues and greens, and very sharp and crisp images. Effective for impressive landscapes. u Fine Detail Suited for detailed outline and fine texture description of the subject. The colors will be slightly vivid. S Neutral Geared for users who prefer to process images with their computer.
A Selecting a Picture StyleN Symbols The Picture Style selection screen has icons for [Strength], [Fineness], or [Threshold] for [Sharpness] as well as [Contrast], and other parameters. The numerals indicate the values for these parameters set for the respective Picture Style.
A Customizing a Picture StyleN You can customize the Picture Styles. You can change or adjust the parameter settings of Picture Styles such as [Strength], [Fineness], or [Threshold] for [Sharpness] as well as [Contrast] and other parameters from the default settings. To see the resulting effects, take test shots. To customize [Monochrome], see page 166. 1 Press the button. The Picture Style selection screen will appear. a Picture Style. 2 Select Select a Picture Style, then press button.
A Customizing a Picture StyleN Parameter Settings and Effects Sharpness g J Strength 0: Weak outline emphasis K Fineness*1 1: Fine 7: Strong outline emphasis 5: Grainy L Threshold*2 1: Low 5: High +4: High contrast h Contrast -4: Low contrast i Saturation -4: Low saturation +4: High saturation j Color tone -4: Reddish skin tone +4: Yellowish skin tone *1: Indicates the fineness of the outlines to be emphasized. The smaller the number, the finer the outlines that can be emphasized.
A Customizing a Picture StyleN V Monochrome Adjustment Besides the effects described on the preceding page such as [Contrast], or [Strength], [Fineness] and [Threshold] for [Sharpness], you can also set [Filter effect] and [Toning effect]. kFilter effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more. Filter Sample Effects N: None Normal black-and-white image with no filter effects.
A Registering a Picture StyleN You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. Useful when you want to preset multiple Picture Styles with different settings. You can also adjust the parameters of a Picture Style that is registered to the camera with EOS Utility (EOS software, p.488) here. 1 Press the button. The Picture Style selection screen will appear. [User Def. *].
A Registering a Picture StyleN a parameter. 5 Select Select the parameter (such as [Strength] of [Sharpness]) to be set, then press <0>. the parameter. 6 Set Press the keys to adjust the effect of the parameter, then press <0>. For details, see “Customizing a Picture Style” (p.164-166). Press the button to register the adjusted parameter settings. The Picture Style selection screen will then reappear. The base Picture Style will be indicated on the right of [User Def. *].
B: Matching the Light SourceN White balance (WB) is for making the white areas look white. Normally, the Auto [Q] (Ambience priority) or [Qw] (White priority) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with Auto, you can select the white balance to match the light source or set it manually by shooting a white object. In Basic Zone modes, [Q] (Ambience priority) is set automatically. (In the
mode, [Qw] (White priority) is set.) 1 Press the button.
B: Matching the Light SourceN Q Auto White Balance With [Q] (Ambience priority), you can increase the intensity of the image’s warm color cast when shooting a tungsten-light scene. If you select [Qw] (White priority), you can reduce the intensity of the image’s warm color cast. If you want to match the Auto white balance of previous EOS camera models, select [Q] (Ambience priority). the button. 1 Press [White balance] will appear. [Q]. 2 Select With [Q] selected, press the button.
B: Matching the Light SourceN O Custom White Balance With custom white balance, you can set the white balance for the specific light source of the shooting location. Make sure to perform this procedure under the light source at the actual location of the shoot. 1 Shoot a white object. Look through the viewfinder and aim the entire dotted line box (shown in the illustration) over a plain, white object. Focus manually and shoot with the standard exposure set for the white object.
B: Matching the Light SourceN [O (Custom)]. 4 Select Press the button. Select [O (Custom)], then press <0>. If the exposure obtained in step 1 differs greatly from the standard exposure, a correct white balance may not be obtained. In step 3, the following images cannot be selected: Images captured with the Picture Style set to [Monochrome] (p.162), images shot with a Creative filter, images processed with a Creative filter after shooting, cropped images, and images shot with another camera.
u Adjusting the Color Tone for the Light SourceN You can correct the white balance that is set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. This function is for advanced users, particularly for those users who understand the use of color temperature conversion and color compensating filters and their effects. White Balance Correction 1 Select [WB Shift/Bkt.
u Adjusting the Color Tone for the Light SourceN White Balance Auto Bracketing With just one shot, three images with different color tones can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias and magenta/green bias. This function is called white balance bracketing (WB Bkt.). White balance bracketing is possible up to ±3 levels in single-level increments. Set the white balance bracketing amount.
3 Auto Correction of Brightness and ContrastN If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. This function is called Auto Lighting Optimizer. The default setting is [Standard]. With JPEG images, the correction is applied when the image is captured. In Basic Zone modes, [Standard] is set automatically. 1 Select [Auto Lighting Optimizer]. Under the [z2] tab, select [Auto Lighting Optimizer], then press <0>. the setting.
3 Setting Noise ReductionN High ISO Speed Noise Reduction This function reduces the noise generated in the image. Although noise reduction is applied at all ISO speeds, it is particularly effective at high ISO speeds. When shooting at low ISO speeds, the noise in the darker parts of the image (shadow areas) can further be reduced. Change the setting to match the noise level. 1 Select [High ISO speed NR]. Under the [z4] tab, select [High ISO speed NR], then press <0>. the level.
3 Setting Noise ReductionN When [Multi Shot Noise Reduction] is Set If there is significant misalignment in the image due to camera shake, the noise reduction effect may become smaller. If you are handholding the camera, keep it steady to prevent camera shake. Using a tripod is recommended. If you shoot a moving subject, the moving subject may leave afterimages. The image alignment may not function properly with repetitive patterns (lattice, stripes, etc.) or flat, single-tone images.
3 Setting Noise ReductionN the desired setting. 2 Set Select the desired setting, then press <0>. [Auto] For exposures of 1 sec. or longer, noise reduction is performed automatically if noise typical of long exposures is detected. This [Auto] setting is effective enough in most cases. [Enable] Noise reduction is performed for all exposures of 1 sec. or longer. The [Enable] setting may reduce noise that cannot be detected with the [Auto] setting. the picture.
3 Correction of Lens Aberrations due to Optical CharacteristicsN Peripheral light fall-off is a phenomenon that makes the image corners look darker due to the optical characteristics of the lens. Color fringing along subject outlines is called chromatic aberration. Image distortion due to optical characteristics of the lens is called distortion. And decreased image sharpness due to the aperture is called diffraction phenomenon. These lens aberrations can be corrected.
3 Correction of Lens Aberrations due to Optical CharacteristicsN [Enable]. 3 Select Check that [Correction data available] is displayed for the attached lens. Select [Enable], then press <0>. the picture. 4 Take The image will be recorded with the peripheral illumination corrected. Depending on shooting conditions, noise may appear on the image periphery. The higher the ISO speed, the lower the correction amount will be.
3 Correction of Lens Aberrations due to Optical CharacteristicsN Chromatic Aberration Correction 1 Select [Chromatic aberr corr]. [Enable]. 2 Select Check that [Correction data available] is displayed for the attached lens. Select [Enable], then press <0>. the picture. 3 Take The image will be recorded with the chromatic aberration corrected. Distortion Correction 1 Select [Distortion correction]. [Enable]. 2 Select Check that [Correction data available] is displayed for the attached lens.
3 Correction of Lens Aberrations due to Optical CharacteristicsN Since distortion correction is applied, the camera records an image range narrower than the one seen through the viewfinder. (The image periphery is slightly trimmed and the resolution looks slightly lowered.) Distortion correction will be reflected in the captured image, but it cannot be seen in the viewfinder during shooting. Distortion correction cannot be set during movie shooting or when Multi Shot Noise Reduction is set.
3 Correction of Lens Aberrations due to Optical CharacteristicsN Lens Correction Data The lens correction data for lens aberration corrections is registered (stored) in the camera. With [Enable] selected, the peripheral illumination correction, chromatic aberration correction, distortion correction, and diffraction correction will be applied automatically. With EOS Utility (EOS software, p.488), you can check which lenses have their correction data registered in the camera.
3 Correction of Lens Aberrations due to Optical CharacteristicsN Cautions for Lens Correction Peripheral illumination correction, chromatic aberration correction, distortion correction, and diffraction correction cannot be applied to JPEG images already taken. When using a non-Canon lens, setting the corrections to [Disable] is recommended, even if [Correction data available] is displayed.
3 Reducing FlickerN If you shoot an image with a fast shutter speed under a light source such as fluorescent light, the blinking of the light source causes flicker and the image may be vertically unevenly exposed. If continuous shooting is used under these conditions, uneven exposures or colors across the images may result.
3 Reducing FlickerN Under [54: Custom Functions (C.Fn)], if you set [10: Mirror lockup] to [1:Enable], the [Anti-flicker shoot.] setting will automatically switch to [Disable]. If the subject is against a dark background or if there is a bright light in the image, flicker may not be properly detected. Under certain special types of lighting, the camera may not be able to reduce the effects of the flicker even when is displayed in the viewfinder.
3 Setting the Color Reproduction RangeN The range of reproducible colors is called “color space”. With this camera, you can set the color space for captured images to sRGB or Adobe RGB. For normal shooting, sRGB is recommended. In Basic Zone modes, [sRGB] is set automatically. 1 Select [Color space]. Under the [z3] tab, select [Color space], then press <0>. the desired color space. 2 Set Select [sRGB] or [Adobe RGB], then press <0>.
5 Advanced Operations for Photographic Effects Cre ati v e ne Zo In Creative Zone modes, you can change various settings of the camera as you desire to obtain a wide variety of shooting results, by selecting the shutter speed and/or aperture, adjusting the exposure as you prefer, etc. The O icon at the upper right of the page title indicates that the function is available only in Creative Zone modes.
d: Program AE The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. * stands for Program. * AE stands for Auto Exposure. 1 Set the Mode Dial to . on the subject. 2 Focus Look through the viewfinder and aim the AF point over the subject. Then press the shutter button halfway. When focus is achieved, the focus indicator on the viewfinder’s bottom right will light up (in One-Shot AF mode).
d: Program AE Shooting Tips Change the ISO speed. Use the built-in flash. To match the subject and ambient lighting level, you can change the ISO speed (p.158) or use the built-in flash (p.216). In the mode, the built-in flash will not fire automatically. Therefore, press the (flash) button to raise the built-in flash when indoors or shooting in low light. Change the program using Program shift.
s: Conveying the Subject’s Movement You can either freeze the action or create motion blur with the (Shutter-priority AE) mode on the Mode Dial. * stands for Time value. Blurred motion (Slow shutter speed: 1/30 sec.) 1 Frozen motion (Fast shutter speed: 1/2000 sec.) Set the Mode Dial to . the desired shutter speed. 2 Set While looking at the LCD panel or in the viewfinder, turn the <6> dial. See “Shooting Tips” on the next page for advice on setting the shutter speed.
s: Conveying the Subject’s Movement Shooting Tips To freeze the motion of a fast-moving subject Use a fast shutter speed such as 1/4000 sec. to 1/500 sec. according to the speed of the moving subject. To blur a running child or animal and convey an impression of motion Use a medium shutter speed such as 1/250 sec. to 1/30 sec. Follow the moving subject through the viewfinder and press the shutter button to take the picture. If you use a telephoto lens, hold it steady to prevent camera shake.
f: Changing the Depth of Field To blur the background or to make everything near and far look sharp, set the Mode Dial to (Aperture-priority AE) to adjust the depth of field (range of acceptable focus). * stands for Aperture value (the size of the lens diaphragm opening). Blurred background (With a low aperture f/number: f/5.6) 1 Sharp foreground and background (With a high aperture f/number: f/32) Set the Mode Dial to . the desired aperture.
f: Changing the Depth of Field Shooting Tips When using an aperture with a high f/number or shooting in low light scenes, note that camera shake can occur. A higher aperture f/number will make the shutter speed slower. Under low light, the shutter speed can be as long as 30 sec. In such cases, increase the ISO speed and hold the camera steady or use a tripod. The depth of field depends not only on the aperture, but also on the lens and on the subject distance.
f: Changing the Depth of Field D Using the Built-in Flash To obtain a correct flash exposure, the flash output will be automatically controlled (autoflash) to match the set aperture. The shutter speed will be set automatically within the range of 1/200 sec. - 30 sec. to match the brightness of the scene. In low light, the main subject is exposed with the autoflash, and the background is exposed with a slow shutter speed set automatically.
a: Manual Exposure You can set both the shutter speed and aperture manually as desired. While referring to the exposure level indicator in the viewfinder, you can set the exposure as desired. This method is called manual exposure. * stands for Manual. 1 Set the Mode Dial to . 2 Set the ISO speed (p.158). the shutter speed and aperture. 3 Set To set the shutter speed, turn the <6> <5> Standard exposure index Exposure level mark <6> dial. To set the aperture, turn the <5> dial.
a: Manual Exposure Exposure Compensation with ISO Auto If the ISO speed is set to A (AUTO) for manual exposure shooting, you can set exposure compensation (p.205) as follows: [z2: Expo.comp./AEB] [s: Expo comp (hold btn, turn S)] with [14: Custom Controls] under [54: Custom Functions(C.Fn)] (p.409) Quick Control (p.65) If ISO Auto is set, the ISO speed setting will change to obtain the standard exposure with the set shutter speed and aperture.
BULB: Long (Bulb) Exposures In this mode, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutter button. This is called bulb exposure. Use bulb exposures for night scenes, fireworks, the heavens, and other subjects requiring long exposures. 1 Set the Mode Dial to . to (buLb). 2 Set Turn the <6> dial counterclockwise to set it. the desired aperture. 3 Set Turn the <5> dial to set it. the picture.
BULB: Long (Bulb) Exposures Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. Since long bulb exposures produce more noise than usual, the image may look slightly grainy. If ISO Auto is set, the ISO speed will be ISO 400.
BULB: Long (Bulb) Exposures p Bulb TimerN You can preset the bulb exposure’s exposure time. With the bulb timer, you need not keep holding down the shutter button during the bulb exposure. This reduces camera shake. The bulb timer can be set only for (bulb exposure). It cannot be set (or will not function) in any other mode. 1 Select [Bulb timer]. Under the [z5] tab, select [Bulb timer], then press <0>. [Enable]. 2 Select Select [Enable], then press the button. the desired exposure time.
BULB: Long (Bulb) Exposures [OK]. 4 Select The set time will be displayed on the menu screen. When you exit the menu,
will be displayed on the LCD panel. Bulb timer Elapsed exposure time the picture. 5 Take Press the shutter button completely, and the bulb exposure will start and continue until the set time elapses. During bulb timer shooting,
will blink. To cancel the timer setting, set [Disable] in step 2. The drive mode cannot be selected.
q Changing the Metering ModeN Four methods (metering modes) to measure the subject’s brightness are provided. Normally, evaluative metering is recommended. In Basic Zone modes, evaluative metering is set automatically. (In the <8: x> and modes, center-weighted average metering is set.) 1 Select [Metering mode]. Under the [z3] tab, select [Metering mode], then press <0>. the metering mode. 2 Set Select the desired metering mode, then press <0>.
q Changing the Metering ModeN e Center-weighted average metering The metering is averaged for the entire scene with the screen center weighted more heavily. This metering mode is for advanced experts. With q (Evaluative metering), the exposure setting will be locked when you press the shutter button halfway and focus is achieved. In the w (Partial metering), r (Spot metering), and e (Center-weighted average metering) modes, the exposure is set at the moment the picture is taken.
Setting the Desired Exposure CompensationN Set exposure compensation if the exposure (without flash) does not come out as desired. This feature can be used in Creative Zone modes (except ). You can set the exposure compensation up to ±5 stops* in 1/3-stop increments. If the mode and ISO Auto are both set, see page 198 to set the exposure compensation. * In Live View shooting/movie shooting, or when [s: Shooting screen] is set to [Guided], exposure compensation can be set up to ±3 stops.
3 Auto Exposure BracketingN This feature takes exposure compensation a step further by varying the exposure automatically in the range of ±2 stops in 1/3-stop increments with three shots as shown below. You can then choose the best exposure. This is called AEB (Auto Exposure Bracketing). Standard exposure Darker exposure (Decreased exposure) 1 Brighter exposure (Increased exposure) Select [Expo.comp./AEB]. Under the [z2] tab, select [Expo.comp./AEB], then press <0>. the AEB range.
3 Auto Exposure BracketingN Canceling AEB Follow steps 1 and 2 to turn off the AEB range display (set to 0). The AEB setting will also be canceled automatically if the power switch is set to <2>, flash recharging is complete, etc. Shooting Tips Using AEB with continuous shooting If you set the drive mode to or (p.
A Locking the ExposureN You can lock the exposure when you want to set the focus and exposure separately or when you are to take multiple shots at the same exposure setting. Press the button to lock the exposure, then recompose and take the picture. This is called AE lock. It is effective for shooting backlit subjects, etc. 1 Focus on the subject. Press the shutter button halfway. The exposure setting will be displayed. the button (0).
Mirror Lockup to Reduce Camera Vibration BlurN You can use the mirror lockup function to prevent the disturbing mechanical vibrations (mirror shock) when shooting with super telephoto lenses or shooting close-ups (macro photography). Mirror lockup is enabled by setting [10: Mirror lockup] to [1:Enable] in [54: Custom Functions (C.Fn)] (p.406). 1 Focus on the subject, then press the shutter button completely. The mirror will swing up. 2 Press the shutter button completely again.
Mirror Lockup to Reduce Camera Vibration BlurN Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. In very bright light, such as at the beach or a ski slope on a sunny day, take the picture promptly after mirror lockup is stabilized.
p Interval Timer Shooting With the interval timer, you can set the shooting interval and the number of shots. The camera will repeat taking one shot with the set interval until the set number of shots are taken. 1 Select [Interval timer]. Under the [z5] tab (the [z1] tab in Basic Zone modes), select [Interval timer], then press <0>. [Enable]. 2 Select Select [Enable], then press the button. the shooting interval and 3 Set number of shots.
p Interval Timer Shooting Number of shots Shooting interval [OK]. 4 Select The interval timer settings will be displayed on the menu screen. When you exit the menu,
will be displayed on the LCD panel. Interval timer the picture. 5 Take First shot is taken and shooting continues according to the interval timer settings. During interval timer shooting,
will blink. After the set number of shots are taken, the interval timer shooting will stop and be automatically canceled.
p Interval Timer Shooting Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. If the lens’s focus mode switch is set to , the camera will not shoot when focus is not achieved. Setting it to and focusing manually before shooting is recommended. Live View shooting, movie shooting, bulb exposures, or mirror lockup cannot be performed with interval timer.
6 Flash Photography This chapter describes how to shoot with built-in flash and external Speedlites (EX-series, sold separately), how to set flash settings on the camera’s menu screen, and how to use the built-in flash for wireless flash photography. Flash cannot be used in movie shooting. (It will not fire.) AEB cannot be used in flash photography.
D Using the Built-in Flash In indoor, low light, or backlit conditions in daylight, just raise the built-in flash and press the shutter button to easily take beautiful pictures. In the mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set automatically to prevent camera shake. 1 Press the button. In Creative Zone modes, you can press the button anytime to take flash pictures. While the flash is recharging, “buSY” is displayed in the viewfinder and on the LCD panel.
D Using the Built-in Flash Shooting Tips In bright light, decrease the ISO speed. If the exposure setting in the viewfinder blinks, decrease the ISO speed. Detach the lens hood. Do not get too close to the subject. If the lens has a hood attached or you are too close to the subject, the bottom of the picture may look dark due to the obstructed flash light. For important shots, play back the image and check to make sure the picture does not look unnaturally dark at the bottom part.
D Using the Built-in Flash y Flash Exposure CompensationN Set the flash exposure compensation if the brightness of the subject does not come out as desired (so you want to adjust the flash output) in flash photography. You can set the flash exposure compensation up to ±2 stops in 1/3-stop increments. 1 Press the button (7). The Quick Control screen will appear (p.65). [y]. 2 Select Press the or keys to select [y*]. [Flash exposure comp.] will be displayed at the bottom.
D Using the Built-in Flash The compensation amount will be retained even after you set the power switch to <2>. You can also set flash exposure compensation with [Built-in flash settings] in [z2: Flash control] (p.226). A Locking the Flash Exposure (FE lock)N If the subject is on the side of the frame and you use flash, the subject may turn out to be too bright or dark depending on the background, etc. Use FE lock in such a case.
D Using the Built-in Flash the picture. 4 Take Compose the shot and press the shutter button completely. The flash is fired, and the picture is taken. If the subject is too far away and the captured image comes out dark, the icon will blink. Move closer to the subject and repeat steps 2 to 4. FE lock is not possible during Live View shooting.
D Using an External Speedlite EOS-dedicated, EX-series Speedlites Using an EX-series Speedlite (sold separately) makes flash photography easy. For operation procedures, refer to the EX-series Speedlite’s Instruction Manual. This camera is a Type-A camera that can use all the features of EX-series Speedlites. To set the flash functions and flash Custom Functions on the camera’s menu screen, see pages 223-228.
D Using an External Speedlite Canon Speedlites Other Than the EX-series With an EZ/E/EG/ML/TL-series Speedlite set to A-TTL or TTL autoflash mode, the flash is fired at full output at all times. Set the camera’s shooting mode to (manual exposure) or (aperture-priority AE) and adjust the aperture setting before shooting. When using a Speedlite that has manual flash mode, shoot in the manual flash mode.
3 Setting the Flash FunctionN With the built-in flash or an EX-series, external Speedlite compatible with the flash function settings, you can use the camera’s menu screen to set flash functions and the external Speedlite’s Custom Functions. If you use an external Speedlite, attach the Speedlite to the camera and turn on the Speedlite before setting the flash functions. For details on the external Speedlite’s flash functions, refer to the Speedlite’s instruction manual. 1 Select [Flash control].
3 Setting the Flash FunctionN Flash Sync. Speed in Av Mode You can set the flash-sync speed for flash photography in the aperture-priority AE mode. 4 : Auto The flash sync speed is set automatically within a range of 1/200 sec. to 30 sec. to suit the scene’s brightness. High-speed sync is also possible. 6 : 1/200-1/60 sec. auto Prevents a slow shutter speed from being set in low-light conditions. It is effective for preventing subject blur and camera shake.
3 Setting the Flash FunctionN Displaying the Flash Function Setting Screen Directly When you use the built-in flash or an external, EX-series Speedlite compatible with the flash function settings, you can press the button to directly display the [Built-in flash settings] or [External flash func. setting] screen without first displaying the menu screen. With built-in flash Press the button twice. Press the button to raise the built-in flash.
3 Setting the Flash FunctionN [Built-in flash settings] and [External flash func. setting] You can set the functions in the table below. The functions displayed under [External flash func. setting] vary depending on the Speedlite model. Select [Built-in flash settings] or [External flash func. setting]. The flash function setting screen will be displayed. With [Built-in flash settings], only the highlighted functions can be selected and set. Flash mode [Built-in flash settings] [External flash func.
3 Setting the Flash FunctionN Flash mode When using an external Speedlite, you can select the flash mode to suit your desired photographic effects. [E-TTL II] is the standard mode of EX-series Speedlites for automatic flash photography. [Manual flash] is the mode for advanced users who want to set the [Flash output] (1/1 to 1/128) themselves. Regarding other flash modes, refer to the instruction manual of a Speedlite compatible with the respective flash mode.
3 Setting the Flash FunctionN Setting the External Speedlite Custom Functions The Custom Functions displayed under [External flash C.Fn setting] vary depending on the Speedlite model. 1 Display the Custom Function. With the camera ready to shoot with an external Speedlite, select [External flash C.Fn setting], then press <0>. the Custom Function. 2 Set Press the keys to select the function number, then set the function. The procedure is the same as setting the camera’s Custom Functions (p.
Wireless Flash PhotographyN The camera’s built-in flash can work as a master unit for Canon EXseries, external Speedlites equipped with a wireless slave feature. It can wirelessly trigger the Speedlite(s) to fire via optical transmission. Be sure to read the instructions and cautions about wireless flash photography (optical transmission) in the Speedlite’s instruction manual.
Wireless Flash PhotographyN *1: If the slave Speedlite does not have a transmission channel setting function, the flash can work regardless of the camera’s channel setting. *2: In small rooms, the slave unit may work even if its wireless sensor does not face the camera. The camera’s wireless signals may be able to bounce off the walls and enable wireless photography.
Wireless Flash PhotographyN Wireless Flash Photography Configurations The tables below show the possible configurations for wireless flash photography. Select the configuration suiting the subject, shooting conditions, the number of external Speedlites you use, etc. External Speedlite A:B Flash Quantity Ratio Built-in Page Flash Setting Wireless Firing Group Functions Single - - p.232 0 Single - Used p.235 0:3 - Multiple - - p.234 0 1All Set - p.
Easy Wireless Flash PhotographyN The basics of easy, fully automatic wireless flash photography are described below. Fully Automatic Shooting with One External Speedlite Steps 1 to 4 and 6 apply to all wireless flash photography. Therefore, these steps are omitted in other wireless flash setups described on the pages hereafter. 1 Press the button to raise the built-in flash. For wireless flash photography, be sure to raise the built-in flash. [Flash control].
Easy Wireless Flash PhotographyN [Built-in flash settings]. 4 Select Select [Built-in flash settings], then press <0>. [EasyWireless]. 5 Select For [Built-in flash], select [EasyWireless], then press <0>. [Channel]. 6 Set Set the transmission channel (1-4) to the same one as the slave unit. the picture. 7 Take Set the camera and take the picture in the same way as with normal flash photography. the wireless flash 8 Exit photography. For [Built-in flash], select [NormalFiring].
Easy Wireless Flash PhotographyN Fully Automatic Shooting with Multiple External Speedlites You can have multiple slave units fire as if they were a single Speedlite. This is convenient when you need a large flash output. Basic settings: Flash mode E-TTL II meter. Built-in flash Channel : E-TTL II : Evaluative : EasyWireless : (Same as slave units) All the slave units will be controlled to fire at the same output and obtain a standard exposure.
Custom Wireless Flash PhotographyN Fully Automatic Shooting with One External Speedlite and Built-in Flash This is fully automatic wireless flash photography with one external Speedlite and the built-in flash. You can change the flash ratio between the external Speedlite and built-in flash to adjust how the shadows cast on the subject. On the menu screens, the <0> and <1> icons indicate the external Speedlite, and the <3> and <2> icons indicate the built-in flash. 1 Select [CustWireless].
Custom Wireless Flash PhotographyN Fully Automatic Shooting with Multiple External Speedlites Multiple Speedlite slave units can be fired as one flash unit or separated into slave groups for shooting with flash ratio control. The basic settings are shown below. By changing the [Firing group] setting, you can shoot with various wireless flash setups with multiple Speedlites. Basic settings: Flash mode E-TTL II meter. Wireless func.
Custom Wireless Flash PhotographyN [1(A:B)] Firing multiple slave units in multiple groups A You can divide the slave units into groups A and B, and can change the flash ratio to obtain the desired lighting effect. Refer to the Speedlite’s instruction manual and set one slave unit to firing group A and the other to firing group B. Position the Speedlites as shown in the illustration. B 1 Select [Wireless func.]. Follow step 2 on page 235 to select [0], then press <0>.
Custom Wireless Flash PhotographyN Fully Automatic Shooting with the Built-in Flash and Multiple External Speedlites The built-in flash can also be added to the wireless flash photography described on pages 236-237. The basic settings are shown below. By changing the [Firing group] setting, you can shoot with various wireless flash setups of multiple Speedlites complemented with the built-in flash. 1 Basic settings: Flash mode E-TTL II meter. Wireless func.
Custom Wireless Flash PhotographyN Flash Exposure Compensation When [Flash mode] is set to [E-TTL II], flash exposure compensation can be set. The flash exposure compensation settings (see below) that can be set vary depending on the [Wireless func.] and [Firing group] settings. [Flash exposure comp.] The set amount of flash exposure compensation will be applied to the built-in flash and all the external Speedlites. [2exp. comp.] Flash exposure compensation is applied only to the built-in flash.
Custom Wireless Flash PhotographyN Setting the Flash Output Manually for Wireless Flash Photography When [Flash mode] is set to [Manual flash], flash exposure can be set manually. The flash output settings that can be set ([1flash output], [Group A output], etc.) vary depending on the [Wireless func.] setting (see below). [Wireless func.: 0] [Firing group: 1All] The manual flash output setting is applied to all the external Speedlites.
7 Shooting with the LCD Monitor (Live View Shooting) You can shoot while viewing the image on the camera’s LCD monitor. This is called “Live View shooting”. If you handhold the camera and shoot while viewing the LCD monitor, camera shake may cause blurred images. Using a tripod is recommended in such cases. Remote Live View Shooting With EOS Utility (EOS software, p.488) installed on your computer, you can connect the camera to the computer and shoot remotely while viewing the computer screen.
A Shooting with the LCD Monitor 1 Display the Live View image. Press the button. The Live View image will appear on the LCD monitor. In the mode, the scene icon for the scene detected by the camera is displayed on the upper left of the screen (p.247). The Live View image will be displayed in the brightness level closely matching that of the actual image to be captured. on the subject. 2 Focus When you press the shutter button halfway, the camera will focus with the current AF method (p.
A Shooting with the LCD Monitor 3 Enabling Live View Shooting Set [z5: Live View shoot.] (the [z1] tab in Basic Zone modes) to [Enable]. Number of Possible Shots with Live View Shooting Temperature Room Temperature (23°C / 73°F) Low Temperatures (0°C / 32°F) No Flash Approx. 310 shots Approx. 270 shots 50% Flash Use Approx. 270 shots Approx. 230 shots The figures above are based on a fully-charged Battery Pack LP-E17 and CIPA (Camera & Imaging Products Association) testing standards.
A Shooting with the LCD Monitor In the <8: x> mode, Live View shooting is not possible. In the <8: q> mode, the angle of view changes slightly in Live View shooting because distortion correction is applied. In the <8: FG> and modes, the image area will be smaller. For flash photography, the continuous shooting speed will become slower (max. approx. 2.0 shots/sec.). Do not point the camera toward an intense light source, such as the sun or an intense artificial light source.
A Shooting with the LCD Monitor Information Display Each time you press the button, the information display will change.
A Shooting with the LCD Monitor You can display the electronic level by pressing the button (p.78). Note that if the AF method is set to [u+Tracking] or the camera is connected to a TV set with an HDMI cable, the electronic level cannot be displayed. You can display the histogram by pressing the button. However, the histogram is not displayed while pressing the shutter button completely.
A Shooting with the LCD Monitor Scene Icons In the shooting mode, the camera detects the scene type and sets everything automatically to suit the scene. The detected scene type is indicated on the upper left of the screen.
A Shooting with the LCD Monitor *4: Displayed when all the following conditions apply: The shooting scene is dark, it is a night scene, and the camera is mounted on a tripod. *5: Displayed with any of the lenses below: • EF-S18-55mm f/3.5-5.6 IS II • EF-S55-250mm f/4-5.6 IS II • EF300mm f/2.8L IS II USM • EF400mm f/2.8L IS II USM • EF500mm f/4L IS II USM • EF600mm f/4L IS II USM • Image Stabilizer lenses released in and after 2012.
Shooting Function Settings Function settings particular to Live View shooting are described here. Q Quick Control In Creative Zone modes, if you press the button with the image displayed on the LCD monitor, you can set AF method, AF operation, Drive mode, Metering mode, Image quality, White balance, Picture Style, Auto Lighting Optimizer, and Creative filters.
Shooting Function Settings the setting. 3 Exit Press <0> or the button to finalize the setting and return to Live View shooting. You can also select [2] to return to Live View shooting. In Creative Zone modes, you can set the ISO speed by pressing the button. When you set w (Partial metering) or r (Spot metering), a metering circle will be displayed at the center of the screen.
U Shooting with Creative Filter EffectsN While viewing the Live View image, you can apply one of seven filter effects (Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, Water painting effect, Toy camera effect, and Miniature effect) for shooting. The camera saves only the image with the Creative filter applied. You can also take a picture without a Creative filter, then apply an effect afterward and save it as a new image (p.392). the Mode Dial to a Creative 1 Turn Zone mode. the button (7).
U Shooting with Creative Filter EffectsN the filter effect. 5 Adjust Press the button (except for c). Press the keys to adjust the filter effect, then press <0>. the picture. 6 Take The image is shot with the filter effect applied. When you set a Creative filter, single shooting will take effect even if the drive mode is set to or .
U Shooting with Creative Filter EffectsN Creative Filter Characteristics G Grainy B/W Creates a grainy black-and-white photo. You can change the blackand-white effect by adjusting the contrast. W Soft focus Gives the image a soft look. You can change the degree of softness by adjusting the blur. X Fish-eye effect Gives the effect of a fish-eye lens. The image will have a barrel-type distortion. Depending on the level of this filter effect, the area trimmed along the periphery of the image changes.
U Shooting with Creative Filter EffectsN H Toy camera effect Darkens the photo’s corners and applies a unique color tone that makes it look as if it was shot by a toy camera. You can change the color cast by adjusting the color tone. c Miniature effect Creates a diorama effect. If you want the image center to look sharp, take the picture without changing any setting. To move the area that looks sharp (miniature effect frame), see “Adjusting Miniature Effect” (p.116).
3 Menu Function Settings When the camera is set for Live View shooting, menu options exclusive to Live View shooting will appear under the [z6] tab (the [z2] tab in Basic Zone modes). AF method You can select [u+Tracking], [Smooth zone], or [Live 1-point AF]. See pages 259-268 for the AF method. Touch Shutter Just by tapping on the LCD monitor screen, you can focus and take the picture automatically. For details, see page 269.
Changing the Autofocus OperationN You can select the AF (autofocus) operation characteristics to suit the shooting conditions or subject. In Basic Zone modes, the optimum AF operation is set automatically for the respective shooting mode. the button. 1 Press The Quick Control screen will appear. [X]. 2 Select Press the keys to select [X] (AF operation) on the left side of the screen. the AF operation. 3 Select Press the keys to select the desired AF operation, then press <0>.
Changing the Autofocus OperationN One-Shot AF for Still Subjects Suited for still subjects. When you press the shutter button halfway, the camera will focus only once. When focus is achieved, the AF point will turn green and the beeper will sound. The focus remains locked while you hold down the shutter button halfway, allowing you to recompose the image before taking the picture. When the drive mode is set to for high-speed continuous shooting, the maximum continuous shooting speed is approx. 6.
Changing the Autofocus OperationN Servo AF for Moving Subjects This AF operation is suited for moving subjects. While you hold down the shutter button halfway, the camera keeps focusing on the subject continuously. When the drive mode is set to for high-speed continuous shooting, the maximum continuous shooting speed is approx. 4.5 shots/sec. The pictures will be taken with priority given to the continuous shooting speed.
3 Focusing with AF Selecting the AF Method You can select an AF method to suit the shooting conditions and your subject. The following AF methods are provided: [u(face)+Tracking] (p.260), [Smooth zone] (p.262), and [Live 1-point AF] (p.264). If you want to achieve precise focus, set the lens’s focus mode switch to , magnify the image, and focus manually (p.271). Select the AF method. Under the [z6] tab (the [z2] tab in Basic Zone modes), select [AF method].
3 Focusing with AF u(face)+Tracking: c The camera detects and focuses on human faces. If a face moves, the AF point
also moves to track the face. 1 Area AF frame Display the Live View image. Press the button. The Live View image will appear on the LCD monitor. The Area AF frame will be displayed. the AF point. 2 Check When a face is detected, the AF point will appear over the face to be focused on. If multiple faces are detected, will be displayed.
3 Focusing with AF the picture. 4 Take Check the focus and exposure, then press the shutter button completely to take the picture (p.242). Focusing on a subject other than a human face If you press <0> or the button, the AF point will appear at the center and you can use the or keys to move the AF point. Once the AF point achieves focus, it will track the subject even if you change the composition or the subject moves.
3 Focusing with AF Smooth Zone: o The selected Zone AF frame is used to focus. The AF area is larger than with [Live 1-point AF]. 1 Display the Live View image. Press the button. The Live View image will appear on the LCD monitor. The Zone AF frame will be displayed. Zone AF frame the AF point. 2 Select Press the or keys to select a zone. To return to the center zone, press <0> or the button. You can also touch the LCD monitor screen to move the Zone AF frame.
3 Focusing with AF the picture. 4 Take Check the focus and exposure, then press the shutter button completely to take the picture (p.242).
3 Focusing with AF Live 1-point AF: d The camera focuses with a single AF point. This is effective when you want to focus on a particular subject. the Live View image. 1 Display Press the button. AF point The Live View image will appear on the LCD monitor. The AF point < > will appear. During movie shooting, if [Movie Servo AF] is set to [Enable], a larger AF point will be displayed. the AF point. 2 Move Press the or keys to move the AF point to where you want to focus.
3 Focusing with AF Notes for AF AF Operation Even when focus is achieved, pressing the shutter button halfway will focus again. The image brightness may change during and after the AF operation. Depending on the subject and shooting conditions, it may take longer to focus, or the continuous shooting speed may decrease. If the light source changes while the Live View image is displayed, the screen may flicker and focusing may be difficult.
3 Focusing with AF Shooting Conditions that Make Focusing Difficult Subject with low-contrast such as the blue sky, solid-color flat surfaces or when highlight or shadow details are clipped. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Subjects with repetitive patterns (Example: Skyscraper windows, computer keyboards, etc.). Fine lines and subject outlines. Under a light source whose brightness, color, or pattern keeps changing.
3 Focusing with AF Magnified View In the [Smooth zone] and [Live 1-point AF] modes, either press the button or tap on [Y] displayed on the bottom right of the screen. You can magnify the image by approx. 5x or 10x and check the focus. Magnified view is not possible with [u+Tracking]. To move the AF point, press the or keys or tap on the spot you want to magnify. Either press the button or tap on [Y] to magnify the area covered by the magnifying frame.
3 Focusing with AF If focusing is difficult in the magnified view, return to the normal view and perform AF. If you perform AF in the normal view and then use the magnified view, accurate focus may not be achieved. AF speed differs between normal view and magnified view. When in magnified view, Movie Servo AF (p.315) will not function. With the magnified view, achieving focus becomes more difficult due to camera shake. Using a tripod is recommended.
x Shooting with the Touch Shutter Just by tapping on the LCD monitor screen, you can focus and take the picture automatically. 1 Display the Live View image. Press the button. The Live View image will appear on the LCD monitor. the touch shutter. 2 Enable Tap [y] on the screen’s bottom left. Each time you tap on the icon, it will toggle between [y] and [x]. [x] (Touch shutter: Enable) The camera will focus on the spot you tap on, then the picture will be taken.
x Shooting with the Touch Shutter Even if you set the drive mode to or , the camera will still shoot in the single shooting mode. Even if [AF operation] is set to [Servo AF], tapping on the screen will focus on the image with [One-Shot AF]. Tapping on the screen in magnified view will not focus or take the picture. If the Fish-eye effect Creative filter is set, the camera will focus using the AF point at the center of the screen regardless of the point you tap on.
MF: Focusing Manually You can magnify the image and focus precisely with MF (manual focus). 1 Set the lens’s focus mode switch to . Turn the lens focusing ring to focus roughly. the magnifying frame. 2 Display Press the button. The magnifying frame will appear. You can also tap [1] on the screen to magnify the image. the magnifying frame. 3 Move Press the or Magnifying frame keys to move the magnifying frame to where you want to focus.
MF: Focusing Manually manually. 5 Focus While looking at the magnified image, turn the lens focusing ring to focus. After achieving focus, press the button to return to the normal view. the picture. 6 Take Check the focus and exposure, then press the shutter button to take the picture (p.242). In magnified view, the exposure is locked. (Shutter speed and aperture will be displayed in red.) Even with manual focusing, you can use the touch shutter to take a picture.
General Live View Shooting Cautions Image Quality When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable. Shooting in high temperatures may cause noise and irregular colors in the image. If Live View shooting is used continuously for a prolonged period, the camera’s internal temperature may rise, and image quality may deteriorate. Always exit Live View shooting when you are not shooting.
General Live View Shooting Cautions Live View Image Under low- or bright-light conditions, the Live View image may not reflect the brightness of the captured image. Even if a low ISO speed is set, noise may be noticeable in the displayed Live View image under low light. However, when you shoot, the image recorded will have less noise. (The image quality of the Live View image is different from that of the recorded image.
8 Shooting Movies Movie shooting is enabled by setting the power switch to . For cards that can record movies, see page 8. If you handhold the camera and shoot movies, camera shake can cause blurred movies. In such a case, using a tripod is recommended. To shoot while handholding the camera, see page 88. Full HD 1080 Full HD 1080 indicates compatibility with HighDefinition featuring 1080 vertical pixels (scanning lines).
k Shooting Movies Connecting the camera to a TV set is recommended to play back the shot movies (p.369-371). Autoexposure Shooting When the shooting mode is set to any mode other than , autoexposure control will take effect to suit the scene’s current brightness. 1 Set the power switch to . The reflex mirror will make a sound, then the image will appear on the LCD monitor. the Mode Dial to a mode other 2 Set than <8>, , or . on the subject.
k Shooting Movies General Movie Shooting Cautions are on pages 321-322. If necessary, also read “General Live View Shooting Cautions” on pages 273-274. In Basic Zone modes (except the <8> and modes), the shooting result will be the same as with . Also, the scene icon for the scene detected by the camera is displayed on the upper left (p.279). In the and shooting modes, the settings will be the same as when shooting in the mode.
k Shooting Movies ISO Speed in Basic Zone Modes The ISO speed will be set automatically within ISO 100 - ISO 12800. ISO Speed in the , , and Modes The ISO speed will be set automatically within ISO 100 - ISO 12800. The maximum limit varies depending on the [kISO Auto] setting (p.320). Under [54: Custom Functions(C.Fn)], if [2: ISO expansion] is set to [1:On], [Max.:H(25600)] can also be selected for [kISO Auto]. Under [54: Custom Functions(C.
k Shooting Movies Scene Icons During movie shooting in Basic Zone modes (except the <8> and modes), an icon representing the scene detected by the camera will be displayed, and the shooting will be performed to suit the scene. For certain scenes or shooting conditions, the icon displayed may not match the actual scene.
k Shooting Movies Manual Exposure Shooting In the mode, you can manually set the shutter speed, aperture, and ISO speed for movie shooting. Using manual exposure to shoot movies is for advanced users. 1 Set the power switch to . The reflex mirror will make a sound, then the image will appear on the LCD monitor. 2 Set the Mode Dial to . the ISO speed. 3 SetPress the button and turn the <6> or <5> dial to select the ISO speed. For details on the ISO speed, see the next page.
k Shooting Movies and shoot the movie. 5 Focus The procedure is the same as steps 3 and 4 for “Autoexposure Shooting” (p.276). ISO Speed During Manual Exposure Shooting With [AUTO] (A), the ISO speed will be set automatically within ISO 100 - ISO 12800. The maximum limit varies depending on the [kISO Auto] setting (p.320). You can set the ISO speed manually within ISO 100 - ISO 12800 in whole-stop increments. Under [54: Custom Functions(C.
k Shooting Movies Information Display Each time you press the button, the information display will change.
k Shooting Movies You can display the electronic level by pressing the button (p.78). If the AF method is set to [u+Tracking] or the camera is connected to a TV set with an HDMI cable (p.369), the electronic level cannot be displayed. The electronic level, grid lines, or histogram cannot be displayed during movie shooting. (The display will disappear when you start shooting a movie.) When movie shooting starts, the movie shooting remaining time will change to the elapsed time.
k Shooting Movies Still Photo Shooting Still photos cannot be taken during movie shooting. To take still photos, stop the movie shooting and take still photos using viewfinder shooting or Live View shooting. Cautions for Movie Shooting Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components.
k Shooting Movies Notes for Movie Shooting Each time you shoot a movie, a new movie file is created on the card. The movie image’s field of view is approx. 100% (with movie recording size set to [1920x1080]). You can also focus on the image by pressing the
button. Stereo sound is recorded by the camera’s built-in microphones. If you connect the Directional Stereo Microphone DM-E1 (sold separately) to the camera’s external microphone IN terminal (p.
Shooting Function Settings Function settings particular to movie shooting are described here. Q Quick Control If you press the button when the image is displayed on the LCD monitor, you can set AF method, Movie rec. size, Digital zoom, Movie digital IS, Video snapshot, White balance, Picture Style, Auto Lighting Optimizer, and Creative filters. In Basic Zone modes, only the functions in bold above can be set. 1 Press the button (7). The settable functions will be displayed.
3 Setting the Movie Recording Size With [z1: Movie rec. size], you can set the movie recording size (image size, frame rate, and compression method) and other functions. Movies will be recorded in the MP4 format. Image Size L 1920x1080 Full High-Definition (Full HD) recording quality. The aspect ratio is 16:9. w 1280x720 High-Definition (HD) recording quality. The aspect ratio is 16:9. x 640x480 Standard-definition recording quality. The aspect ratio is 4:3. Frame Rate (fps: frame per second) 6 29.
3 Setting the Movie Recording Size Compression method X IPB (Standard) Compresses multiple frames at a time efficiently for recording. Xv IPB (Light) Since the movie is recorded at a low bit rate for playback on various devices, the file size will be smaller than with IPB (Standard). Therefore, you can shoot longer than with IPB (Standard).
3 Setting the Movie Recording Size Movie Files Exceeding 4 GB Even if you shoot a movie exceeding 4 GB, you can keep shooting without interruption. Using SD/SDHC cards formatted with the camera If you use the camera to format an SD/SDHC card, the camera will format it in FAT32. With a FAT32-formatted card, if you shoot a movie and the file size exceeds 4 GB, a new movie file will be created automatically. When you play back the movie, you will have to play each movie file individually.
3 Using Movie Digital Zoom When the recording size is L6/4 (NTSC) or L5 (PAL), you can shoot with an approx. 3x to 10x digital zoom. the Mode Dial to a mode other 1 Set than <8> or . [Digital zoom]. 2 Select Under the [z1] tab, select [Digital zoom], then press <0>. [Approx. 3-10x zoom]. 3 Select Select [Approx. 3-10x zoom], then press <0>. Press the button to exit the menu and return to movie shooting. digital zoom. 4 Use Press the keys. The digital zoom bar will appear.
u Shooting HDR Movies You can shoot movies by reducing the clipped highlight details of bright areas even in high-contrast scenes. The recording size is L6X (NTSC) or L5X (PAL). 1 Set the Mode Dial to <8>. 2 Shoot an HDR movie. Since multiple frames are merged to create an HDR movie, certain parts of the movie image may look distorted. During handheld shooting, camera shake may make the distortion look more noticeable. Using a tripod is recommended.
v Shooting Movies with Creative Filter Effects In the (Creative filters) mode, you can shoot movies with one of five filter effects (Dream, Old Movies, Memory, Dramatic B&W, and Miniature effect movie). The recording size can be set to L6/4 (NTSC) or L5 (PAL). 1 Set the Mode Dial to . the button (7). 2 Press The Quick Control screen will appear. [l]. 3 Select Press the keys to select [l] (Creative filters) on the upper left of the screen, then press <0>. a filter effect.
v Shooting Movies with Creative Filter Effects the filter effect level. 5 Adjust Press the button and select the icon below [Creative filters]. Press the keys to adjust the filter effect, then press <0>. When the Miniature effect movie is set, select the playback speed. 6 Shoot the movie. Magnified view is not possible. The histogram is not displayed. Movie digital zoom, video snapshot, time-lapse movie, and Movie digital IS cannot be set.
v Shooting Movies with Creative Filter Effects k Memory Creates the atmosphere of a distant memory. Gives the movie a soft look overall, reducing brightness of the periphery of the screen. You can modify the overall saturation and the dark areas along the screen edges by adjusting the filter effect. n Dramatic B&W Creates an atmosphere of dramatic realism with high-contrast black and white. You can adjust the graininess and black-and-white effect.
v Shooting Movies with Creative Filter Effects (Miniature Effect Movies) Sound will not be recorded. Movie Servo AF will not function. Miniature effect movies whose playback time is shorter than 1 sec. cannot be edited (p.364).
N Shooting Time-lapse Movies Images shot at a set interval can be stitched together automatically to create a movie file. A time-lapse movie shows how a subject changes in a much shorter period of time than the actual time it took. It is effective for a fixed-point observation of changing scenery, growing plants, etc. Time-lapse movies are recorded in the MOV format and in L6W (NTSC) or L5W (PAL) recording size. the Mode Dial to a mode other 1 Set than <8> or . [Time-lapse movie].
N Shooting Time-lapse Movies the shooting interval and 4 Set number of shots. Check the [k: Time required] and [3: Playback time] displayed at the bottom of the screen to set the shooting interval and number of shots. Set the shooting interval Playback Time required (hours:minutes:seconds) with time [Interval]. Set the number of shots with [No. of shots]. Press <0> so is displayed. Set the desired number, then press <0>. (Returns to .
N Shooting Time-lapse Movies whether to turn off the LCD 6 Set monitor automatically. Select [LCD auto off] and set. Disable The Live View image will remain displayed during shooting. Note that the LCD monitor will turn off when approx. 30 min. elapse after the shooting started. Enable The LCD monitor will turn off approx. 10 sec. after shooting the first frame. You can press the button to turn off or on the LCD monitor during shooting. the beeper for shooting.
N Shooting Time-lapse Movies Time required Indicates the time required to shoot the set number of shots with the set interval. If it exceeds 24 hours, “*** days” will be displayed. Playback time Indicates the recording time (time required to play back the movie) when shooting with the set intervals to create the movie in “L 6 W (NTSC)” or “L 5 W (PAL)” format. the menu. 9 Exit Press the button to turn off the menu screen. the time-lapse movie.
N Shooting Time-lapse Movies Using a tripod is recommended. To cancel the time-lapse movie shooting, press the button. (The setting will be switched to [Disable].) The time-lapse movie shot so far will be recorded on the card. You can play back the shot time-lapse movie with this camera the same way that you play back normal movies. If the time required for shooting is more than 24 hours but not more than 48, “2 days” will be indicated.
N Shooting Time-lapse Movies During time-lapse movie shooting, auto power off will not take effect. Also, you cannot adjust the shooting function and menu function settings, play back images, etc. Sound is not recorded for time-lapse movies. If the next scheduled shot is not possible, it will be skipped. This may shorten the recording time of the created time-lapse movie.
N Shooting Time-lapse Movies You can shoot time-lapse movies with a fully-charged Battery Pack LP-E17 as shown in the table below (approx. time from start of shooting until the battery becomes exhausted). The possible shooting time will vary depending on the shooting conditions. Total Possible Time for Time-lapse Movie Shooting LCD Monitor Room Temperature Low Temperatures During Shooting (23°C / 73°F) (0°C / 32°F) Turned on Approx. 2 hr. 10 min. Approx. 2 hr. Turned off Approx. 3 hr. 30 min. Approx.
3 Shooting Video Snapshots You can shoot a series of short movie clips lasting approx. 2 sec., 4 sec., or 8 sec. called video snapshots. The video snapshots can be joined together into a single movie called a video snapshot album. You can thereby show short and quick highlights of a trip or event. A video snapshot album can also be played back together with background music (p.310, 368).
3 Shooting Video Snapshots 4 Select [Album settings]. 5 Select [Create a new album]. the snapshot length. 6 Select Press <0> and use the keys to select the snapshot’s length, then press <0>. [OK]. 7 Select Press the button to exit the Shooting duration 304 menu. A blue bar will appear to indicate the snapshot length. Go to “Creating a Video Snapshot Album” (p.305).
3 Shooting Video Snapshots Creating a Video Snapshot Album the first video snapshot. 8 Shoot Press the button, then shoot. The blue bar indicating the shooting duration will gradually decrease. After the set shooting duration elapses, the shooting stops automatically. The confirmation screen will appear (p.306-307). as a video snapshot album. 9 Save Select [J Save as album], then press <0>. The movie clip will be saved as the video snapshot album’s first video snapshot.
3 Shooting Video Snapshots Options in Steps 9 and 10 Function Description J Save as album (Step 9) The movie clip will be saved as the video snapshot album’s first video snapshot. J Add to album (Step 10) The video snapshot just recorded will be added to the album recorded immediately before. W Save as a new album (Step 10) A new video snapshot album is created and the movie clip is saved as the first video snapshot. The new album will be a different file from the previously recorded album.
3 Shooting Video Snapshots [Playback video snapshot] Operations in Steps 9 and 10 Function Playback Description 7 Play By pressing <0>, you can play back or pause the video snapshot recorded immediately before. 5 First frame Displays the first scene of the album’s first video snapshot. P Skip backward* Each time you press <0>, the video snapshot skips back by a few seconds. 3 Previous frame Displays the previous frame each time you press <0>. Holding <0> down will rewind the movie.
3 Shooting Video Snapshots Adding to an Existing Album 1 Select [Add to existing album]. Follow step 5 on page 304 to select [Add to existing album], then press <0>. an existing album. 2 Select Turn the <5> dial to select an existing album, then press <0>. Select [OK], then press <0>. Certain video snapshot settings will change to match the existing album’s settings. Press the button to exit the menu. The video snapshot shooting screen will appear. the video snapshot.
3 Shooting Video Snapshots Cautions for Shooting Video Snapshots You can add to an album only the video snapshots with the same duration (approx. 2 sec., 4 sec., or 8 sec. each). Note that if you do any of the following while shooting video snapshots, a new album will be created for subsequent video snapshots. • Changing the [Movie rec. size]. • Changing the [Sound rec.] setting from [Auto]/[Manual] to [Disable] or from [Disable] to [Auto]/[Manual]. • Updating the firmware.
3 Shooting Video Snapshots Playing Back an Album You can play back a video snapshot album in the same way as a normal movie (p.362). 1 Play back the movie. Press the button to display an image. the album. 2 Select In the single-image display, the [st] icon displayed on the upper left of the screen indicates a video snapshot album. Turn the <5> dial to select an album. back the album. 3 Play Press <0>. On the movie playback panel displayed, select [7] (Play), then press <0>.
3 Shooting Video Snapshots Editing an Album After shooting, you can rearrange, delete, or play back the video snapshots in the album. 1 Select [X]. On the movie playback panel displayed, select [X] (Edit), then press <0>. The editing screen will be displayed. an editing operation. 2 Select Select an editing option, then press <0>. Function Description T Move snapshot Press the keys to select the video snapshot you want to move, then press <0>.
3 Shooting Video Snapshots the edited album. 3 Save Press the button to return to the Editing panel at the screen bottom. Select [W] (Save), then press <0>. The save screen will appear. To save it as a new album, select [New file]. To save it and overwrite the original album, select [Overwrite], then press <0>. If the card does not have enough free space, [New file] will not be available. When the battery level is low, editing albums is not possible. Use a fullycharged battery.
3 Menu Function Settings When the power switch is set to , the [z1], [z4], and [z5] tabs will be displayed as the menu options exclusive to movie shooting (the [z1], [z2], and [z3] tabs in Basic Zone modes). z1 z4 z5 z1 Movie recording size You can set the movie recording size (image size, frame rate, and compression method). For details, see page 287. Digital zoom You can use digital zoom for telephoto shooting. For details, see page 290.
3 Menu Function Settings [Sound rec./Rec. level] options [Auto] : The sound-recording level is adjusted automatically. Auto level control will operate automatically in response to the sound level. [Manual] : For advanced users. You can adjust the soundrecording level to one of 64 levels. Select [Rec. level] and press the keys while looking at the level meter to adjust the soundrecording level. Look at the peak hold indicator (approx. 3 sec.
3 Menu Function Settings Lens aberration correctionN You can set peripheral illumination correction and chromatic aberration correction. For details, see page 179. Lens electronic MFN When a lens equipped with an electronic manual focusing function is used, see page 128. z4 Movie Servo AF With this function enabled, the camera focuses on the subject continuously during movie shooting. The default setting is [Enable].
3 Menu Function Settings Cautions When [Movie Servo AF] is Set to [Enable] Shooting Conditions that Make Focusing Difficult • A fast-moving subject approaching or moving away from the camera. • A subject moving at a close distance in front of the camera. • Also see “Shooting Conditions that Make Focusing Difficult” on page 266. Since this drives the lens continuously, it will consume battery power and shorten the possible movie shooting time (p.288).
3 Menu Function Settings Grid display With [3x3 l] or [6x4 m], you can display grid lines to help you level the camera vertically or horizontally. Also, with [3x3+diag n], the grid is displayed together with diagonal lines to help you compose with better balance by aligning the intersections over the subject. Note that the grid is not displayed on the LCD monitor during movie shooting.
3 Menu Function Settings z5 Video snapshot You can shoot video snapshots. For details, see page 303. Time-lapse movie You can shoot time-lapse movies. For details, see page 296. Remote control shooting When [Enable] is set, you can start or stop movie shooting using Wireless Remote Control BR-E1 (sold separately, p.423) or Remote Controller RC-6 (sold separately, p.426). • When Using BR-E1 Set the release mode/movie shooting switch to the position, then press the release button.
3 Menu Function Settings Movie digital IS In-camera image stabilization electronically corrects camera shake during movie shooting. This function is called “Movie digital IS”. With Movie digital IS, images can be stabilized even when using a lens without Image Stabilizer. When using a lens with built-in optical Image Stabilizer, Movie digital IS will function when the lens’s Image Stabilizer switch is set to <1>. Disable (v) : Image stabilization with Movie digital IS is disabled.
3 Menu Function Settings ISO Speed During Movie ShootingN You can set the ISO speed separately for still photo shooting and movie shooting. Set under the [z2] tab. [kISO speed] In manual exposure, you can set the ISO speed (p.281). [kISO Auto] You can set the maximum limit of the automatic ISO speed for ISO Auto to ISO 6400 or ISO 12800. Under [54: Custom Functions(C.Fn)], if [2: ISO expansion] is set to [1:On], you can select [Max.:H(25600)].
General Movie Shooting Cautions Red Internal Temperature Warning Icon If the camera’s internal temperature increases due to prolonged movie shooting or under a high ambient temperature, a red icon will appear. The red icon indicates that movie shooting will soon be terminated automatically. If this happens, you will not be able to shoot again until the camera’s internal temperature decreases. Turn off the power and let the camera rest for a while.
General Movie Shooting Cautions Recording and Image Quality If you use a card with a slow writing speed, a five-level indicator may appear on the right of the screen during movie shooting. It indicates how much data has not yet been written to the card (remaining capacity of the internal buffer memory). The slower the card, the faster the indicator will climb upward. If the indicator becomes full, movie shooting Indicator will stop automatically.
9 Handy Features Disabling the Beeper (p.324) Card Reminder (p.324) Setting the Image Review Time (p.325) Setting the Auto Power Off Time (p.325) Adjusting the LCD Monitor Brightness (p.326) Creating and Selecting a Folder (p.327) File Numbering Methods (p.329) Setting the Copyright Information (p.332) Auto Rotation of Vertical Images (p.334) Reverting the Camera to the Default Settings (p.335) Preventing the LCD Monitor from Turning Off Automatically (p.338) Automatic Sensor Cleaning (p.
Handy Features 3 Disabling the Beeper You can prevent the beeper from sounding when focus is achieved, during self-timer shooting, and during touch operations. Under the [53] tab, select [Beep], then press <0>. Select [Disable], then press <0>. To silence the beeper only for touch operations, select [Touch n]. 3 Card Reminder This setting prevents shooting if there is no card in the camera. Under the [z1] tab, select [Release shutter without card], then press <0>. Select [Disable], then press <0>.
Handy Features 3 Setting the Image Review Time You can change how long the image is displayed on the LCD monitor immediately after shooting. If [Off] is set, the image will not be displayed immediately after shooting. If [Hold] is set, the image review will be displayed up until the [Auto power off] time has elapsed. Note that during image review, if you operate any camera controls such as pressing the shutter button halfway, the image review will end.
Handy Features 3 Adjusting the LCD Monitor Brightness You can adjust the brightness of the LCD monitor to make it easier to view. Under the [52] tab, select [LCD brightness], then press <0>. Press the keys to adjust the brightness on the adjustment screen, then press <0>. When checking the exposure of an image, set the LCD monitor brightness to 4 and prevent the ambient light from affecting the image.
Handy Features 3 Creating and Selecting a Folder You can freely create and select the folder where the captured images are to be saved. This operation is optional since a folder will be created automatically for saving captured images. Creating a Folder 1 Select [Select folder]. Under the [51] tab, select [Select folder], then press <0>. [Create folder]. 2 Select Select [Create folder], then press <0>. a new folder. 3 Create Select [OK], then press <0>.
Handy Features Selecting a Folder Lowest file number Number of images in folder With the folder selection screen displayed, select a folder and press <0>. The folder where the captured images will be saved is selected. Subsequently captured images will be recorded into the selected folder. Folder name Highest file number Folders As with “100CANON” for example, the folder name starts with three digits (the folder number) followed by five alphanumeric characters.
Handy Features 3 File Numbering Methods The image files will be numbered from 0001 to 9999 in the order the images are taken, then saved in a folder. You can change how the file number is assigned. The file number will appear on your computer in this format: IMG_0001.JPG. In [File numbering] under the [51] tab, select [Numbering], then press <0>. The available settings are described below. Select the option, then press <0>.
Handy Features [Auto reset]: When you wish to restart the file numbering from 0001 each time the card is replaced or a new folder is created. When you replace the card or create a folder, the file numbering restarts from 0001 for the new images saved. This is useful if you want to organize images by cards or folders.
Handy Features [Manual reset]: When you wish to reset the file numbering to 0001 or to start from file number 0001 in a new folder. In [File numbering] under the [51] tab, select [Manual reset], then select [OK] on the confirmation dialog. When you reset the file numbering manually, a new folder is created automatically and the file numbering of images saved to that folder starts from 0001.
Handy Features 3 Setting the Copyright InformationN When you set the copyright information, it will be appended to the image as Exif information. 1 Select [Copyright information]. Under the [54] tab, select [Copyright information], then press <0>. the item to be set. 2 Select Select [Enter author’s name] or [Enter copyright details], then press <0>. text. 3 Enter Press the or Character palette Input mode keys to move the n and select the desired character.
Handy Features Checking the Copyright Information When you select [Display copyright info.] in step 2, you can check the [Author] and [Copyright] information that you entered. Deleting the Copyright Information When you select [Delete copyright information] in step 2, you can delete the [Author] and [Copyright] information. If the entry for “Author” or “Copyright” is long, it may not be displayed entirely when you select [Display copyright info.].
Handy Features 3 Auto Rotation of Vertical Images Images shot in vertical orientation are rotated automatically to the proper orientation for viewing, so they will not be displayed in horizontal orientation when played back on the camera’s LCD monitor or viewed on a computer screen. You can change the setting of this feature. Under the [51] tab, select [Auto rotate], then press <0>. The available settings are described below. Select the option, then press <0>.
Handy Features 3 Reverting the Camera to the Default SettingsN The camera’s shooting function settings and menu settings can be reverted to their defaults. This option is available in Creative Zone modes. 1 Select [Clear settings]. Under the [54] tab, select [Clear settings], then press <0>. [Clear all camera settings]. 2 Select Select [Clear all camera settings], then press <0>. [OK]. 3 Select Select [OK], then press <0>.
Handy Features Shooting Function Settings Image Recording Settings <8> mode q (Group Photo) Image quality mode G (Grainy B/W) Aspect ratio 3:2 AF operation One-Shot AF Picture Style Auto Standard AF area selection mode Auto selection AF 73 Drive mode u (Single shooting) Auto Lighting Optimizer Metering mode q (Evaluative metering) Lens aberration correction zISO speed AUTO (Auto) zISO Auto Maximum 6400 Exposure compensation/AEB Canceled Peripheral illumination Enable correctio
Handy Features Camera Settings Auto power off 10 sec/30 sec Live View Shooting Settings Live View shooting Enable Beep AF method Release shutter without card Enable Enable u+Tracking AF operation X Touch Shutter Disable Image review time 2 sec. Metering timer 8 sec.
Handy Features 3 Disabling the Auto Turn Off of the LCD Monitor You can prevent the display-off sensor from turning off the LCD monitor when your eye approaches the viewfinder. Under the [52] tab, select [LCD auto off], then press <0>. Select [Disable], then press <0>. When Angle Finder C (sold separately) is attached to the viewfinder, set it to [Disable]. If [Enable] is set, the LCD monitor may remain off.
f Automatic Sensor Cleaning Whenever you set the power switch to <1> or <2>, the Self Cleaning Sensor Unit is activated to automatically shake off any dust on the front of the sensor. Normally, you need not pay attention to this operation. However, you can manually perform sensor cleaning or can disable this unit as follows. Activating the Sensor Cleaning Manually 1 Select [Sensor cleaning]. Under the [54] tab, select [Sensor cleaning], then press <0>. [Clean nowf].
f Automatic Sensor Cleaning Disabling Automatic Sensor Cleaning In step 2, select [Auto cleaningf] and set it to [Disable]. The sensor will no longer be cleaned when you set the power switch to <1> or <2>.
3 Appending Dust Delete DataN Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that may be visible on captured images. However, for the case where visible dust still remains, you can append the Dust Delete Data to the image for erasing the dust spots later. The Dust Delete Data is used by Digital Photo Professional (EOS software, p.488) to erase the dust spots automatically. Preparation Prepare a solid white object such as a sheet of paper.
3 Appending Dust Delete DataN a solid-white object. 3 Shoot At a distance of 20 cm - 30 cm (0.7 ft. - 1.0 ft.), fill the viewfinder with a patternless, solid-white object and take a picture. The picture will be taken in aperturepriority AE mode at an aperture of f/22. Since the image will not be saved, the data can still be obtained even if there is no card in the camera. When the picture is taken, the camera will start collecting the Dust Delete Data.
3 Manual Sensor CleaningN Dust that could not be removed by the automatic sensor cleaning can be removed manually with a commercially-available blower, etc. Before cleaning the sensor, detach the lens from the camera. The image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. 1 Select [Sensor cleaning]. Under the [54] tab, select [Sensor cleaning], then press <0>. [Clean manually].
3 Manual Sensor CleaningN When Multi Shot Noise Reduction is set, [Clean manually] cannot be selected. While cleaning the sensor, never do any of the following. If the power is cut off, the shutter will close and the shutter curtains and image sensor may get damaged. • Setting the power switch to <2>. • Removing or inserting the battery. The surface of the image sensor is extremely delicate. Clean the sensor with care. Use a plain blower without any brush attached. A brush can scratch the sensor.
10 Image Playback This chapter describes advanced usage of the playback methods described in Chapter 2 “Basic Shooting and Image Playback,” how to play back and erase the captured images (still photos/movies), how to view them on a TV screen, and other playback-related functions. Images shot and saved with another device The camera may not be able to properly display images captured with a different camera, edited with a computer, or that have had their file names changed.
x Searching for Images Quickly H Display Multiple Images on One Screen (Index Display) Search for images quickly with the index display showing 4, 9, 36, or 100 images on one screen. 1 Play back the image. When you press the button, the last image captured will be displayed. to the index display. 2 Switch Press the button. The 4-image index display will appear. The selected image is highlighted with an orange frame.
x Searching for Images Quickly I Jumping through Images (Jump Display) In the single-image display, you can turn the <6> dial to jump through the images forward or backward according to the jump method set. 1 Select [Image jump w/6]. Under the [x2] tab, select [Image jump w/6], then press <0>. the jump method. 2 Select Turn the <5> dial to select the jump method, then press <0>.
x Searching for Images Quickly by jumping. 3 Browse Press the button to play back images. In the single-image display, turn the <6> dial. You can browse by the set method.
u/y Magnifying Images You can magnify a captured image by approx. 1.5x to 10x on the LCD monitor. 1 Magnify the image. Press the button during image playback. The image will be magnified. If you hold down the button, the image will be magnified until it reaches the maximum magnification. Press the button to reduce the magnification. If you hold down the button, the magnification will be reduced to the single-image display. Magnified area position around the image.
d Playing Back with the Touch Screen The LCD monitor is a touch-sensitive panel that you can touch with your fingers for various playback operations. First, press the button to play back images. Browsing Images Swipe with one finger. With single-image display, touch the LCD monitor with one finger. You can browse to the next or previous image by swiping your finger to the left or right. Swipe to the left to see the next (newer) image, or swipe to the right to see the previous (older) image.
d Playing Back with the Touch Screen Reducing Image (Index Display) Pinch two fingers. Touch the screen with two fingers spread apart, and pinch your fingers together on the screen. Each time you pinch your fingers, the single-image display will change to the index display. When you select an image, the orange frame will appear. Tap on the image again to display it as a single image. Magnifying Image Spread two fingers apart.
b Rotating the Image You can rotate the displayed image to the desired orientation. 1 Select [Rotate image]. Under the [x1] tab, select [Rotate image], then press <0>. an image. 2 Select Turn the <5> dial to select the image to be rotated. You can also select an image in the index display (p.346). the image. 3 Rotate Each time you press <0>, the image will rotate clockwise as follows: 90° 9 270° 9 0°. To rotate another image, repeat steps 2 and 3.
3 Setting Ratings You can rate images (still photos and movies) with one of the five rating marks: l/m/n/o/p. This function is called rating. Rating a Single Image 1 Select [Rating]. Under the [x2] tab, select [Rating], then press <0>. [Select images]. 2 Select An image is displayed. the image to be rated. 3 Select Turn the <5> dial to select an image to be rated, then press <0>. By pressing the button, you can select images from a three-image display.
3 Setting Ratings Specifying the Range You can specify the range of images to rate all the images in the range at once. 1 Select [Select range]. Select [Select range] in [x2: Rating], then press <0>. the range of images. 2 Specify Select the first image, then press <0>. Select the last image, then press <0>. The [X] icon will appear on the selected images. To cancel the selection, repeat this step. To return to the previous screen, press the button. the range.
3 Setting Ratings Specifying All Images in a Folder or on a Card You can rate all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [x2: Rating], all the images in the folder or on the card will be specified. Turn the <6> dial to select a rating mark, then select [OK]. To cancel the rating, select the [OFF] rating mark. A total of up to 999 images of a given rating can be displayed.
3 Setting Image Search Conditions You can search for images by specifying the conditions and display the filtered images. You can also play back in a slide show, protect, or erase all the found images at once. 1 Select [Set image search conditions]. Under the [x2] tab, select [Set image search conditions], then press <0>. the search conditions. 2 Set Press the keys to select the condition. Press the keys to set the setting. To cancel the condition, press the button.
3 Setting Image Search Conditions the search conditions. 3 Implement Press <0>. Read the message that appears and select [OK]. the found images. 4 Display Press the button to play back images. Images that match the set conditions will appear in a yellow frame. If there are no images that match the condition, [OK] cannot be selected in step 2 even if you press <0>. (You cannot proceed to step 3.) Even if [52: Auto power off] is set to [4 min.] or less, the auto power off time will be approx.
Q Quick Control for Playback During playback, you can press the button to set the following: [J: Protect images], [b: Rotate image], [9: Rating], [U: Creative filters], [S: Resize (JPEG images only)], [N: Cropping], [T: AF point display], [e: Image jump w/6], [t: Image search], and [q: Send images to smartphone*]. For movies, only the functions in bold above can be set. * Not selectable if [Wi-Fi] under [51: Wireless communication settings] is set to [Disable]. 1 Press the button.
Q Quick Control for Playback To rotate an image, set [51: Auto rotate] to [OnzD]. If [51: Auto rotate] is set to [OnD] or [Off], the [b Rotate image] setting will be recorded to the image, but the camera will not rotate the image for display. Pressing the button during the index display will switch to the single-image display, and the Quick Control screen will appear. Pressing the button again will return to the index display.
k Enjoying Movies The three main ways to play back and enjoy movies are as follows: Playback on a TV Set (p.369) By connecting the camera to a TV set with an HDMI cable, you can play back the camera’s movies and still photos on the TV set. Since hard disk recorders do not have an HDMI IN terminal, the camera cannot be connected to a hard disk recorder with an HDMI cable. Even if the camera is connected to a hard disk recorder with a USB cable, movies and still photos cannot be played back or saved.
k Enjoying Movies Playback and Editing with a Computer The movie files recorded on the card can be transferred to a computer and played back or edited with pre-installed or general-purpose software compatible with the movie’s recording format. To play back or edit a movie with commercially-available software, use software compatible with MOV-format and MP4-format movies. For details on commercially-available software, contact the software manufacturer.
k Playing Back Movies 1 Play back the image. Press the button to display an image. a movie. 2 Select Turn the <5> dial to select the movie to be played back. In the single-image display, the icon displayed on the upper left indicates a movie. If the movie is a video snapshot, will be displayed. In the index display, perforations at the left edge of a thumbnail indicate a movie. As movies cannot be played back from the index display, press <0> to switch to the single-image display.
k Playing Back Movies Movie Playback Panel Operation Playback Description 7 Play Pressing <0> toggles between play and stop. 8 Slow motion Adjust the slow motion speed by pressing the keys. The slow motion speed is indicated on the upper right of the screen. 5 First frame Displays the movie’s first frame. 3 Previous frame Displays the previous frame each time you press <0>. Holding <0> down will rewind the movie. 6 Next frame Plays the movie frame-by-frame each time you press <0>.
X Editing a Movie’s First and Last Scenes Playback with the Touch Screen Tap [7] at the center of the screen. The movie will start playing back. To display the movie playback panel, tap on the upper left of the screen. To pause the movie while it is playing back, tap on the screen. The movie playback panel will also appear. X Editing a Movie’s First and Last Scenes You can edit out the first and last scenes of a movie in approx. 1-sec. increments. 1 On the movie playback screen, select [X].
X Editing a Movie’s First and Last Scenes the edited movie. 3 Check Select [7] and press <0> to play back the edited movie. To change the edited part, go back to step 2. To cancel the editing, press the button, then select [OK] on the confirmation dialog. the edited movie. 4 Save Select [W], then press <0>. The save screen will appear. To save it as a new movie, select [New file]. To save it and overwrite the original movie file, select [Overwrite], then press <0>.
3 Slide Show (Auto Playback) You can automatically play back all the images on the card one after another. 1 Number of images to be played back Select [Slide show]. Under the [x2] tab, select [Slide show], then press <0>. [Set up] as desired. 2 Configure Press the keys to select [Set up], then press <0>. Set the [Display time], [Repeat] (repeated playback), [Transition effect] (effect when changing images), and [Background music] for the still photos.
3 Slide Show (Auto Playback) the slide show. 3 Start Press the keys to select [Start], then press <0>. After [Loading image...] is displayed, the slide show will start. the slide show. 4 Exit To exit the slide show and return to the setting screen, press the button. To pause the slide show, press <0>. During pause, [G] will be displayed on the upper left of the image. Press <0> again to resume the slide show. You can also pause the slide show by tapping on the screen.
3 Slide Show (Auto Playback) Selecting the Background Music After you use EOS Utility (EOS software) to copy background music to the card, you can play background music together with the slide show. 1 Select [Background music]. Set [Background music] to [On], then press <0>. If the card has no background music, you cannot perform step 2. the background music. 2 Select Press the keys to select the desired background music, then press <0>.
Viewing Images on a TV Set By connecting the camera to a TV set with an HDMI cable, you can play the camera’s still photos and movies on the TV set. For the HDMI cable, HDMI Cable HTC-100 (sold separately) is recommended. If the picture does not appear on the TV screen, check if the [53: Video system] is correctly set to [For NTSC] or [For PAL] (depending on the video system of your TV set). 1 Connect the HDMI cable to the camera.
Viewing Images on a TV Set Adjust movie sound volume with the TV set. The sound volume cannot be adjusted with the camera. Before connecting or disconnecting the cable between the camera and TV set, turn off the camera and TV set. Depending on the TV set, part of the image displayed may be cut off. Do not connect any other device’s output to the camera’s terminal. Doing so may cause a malfunction. Certain TV sets may not display the images due to incompatibility.
Viewing Images on a TV Set an image. 5 Select Point the remote control toward the TV set and press the / button to select an image. Still photo playback menu the remote control’s Enter 6 Press button. Movie playback menu 2 : Return a : 9-image index 1 : Play movie y : Slide show B : Display shooting info b : Rotate The menu appears and you can perform the playback operations shown on the left. Press the remote control’s / button to select the desired option, then press the Enter button.
K Protecting Images You can protect important images from being accidentally erased by the camera’s erase function. 3 Protecting a Single Image 1 Select [Protect images]. Under the [31] tab, select [Protect images], then press <0>. [Select images]. 2 Select An image is displayed. Image protection icon the image to be protected. 3 Select Turn the <5> dial to select the image to be protected. You can also select an image on the index display (p.346). the image.
K Protecting Images 3 Specifying the Range of Images to be Protected You can specify the range of images to protect all the images in the range at once. 1 Select [Select range]. Select [Select range] in [x1: Protect images], then press <0>. the range of images. 2 Specify Select the first image, then press <0>. Select the last image, then press <0>. The images will be protected and the icon will appear. To cancel the selection, repeat this step.
K Protecting Images 3 Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [31: Protect images], all the images in the folder or on the card will be protected. To cancel the image protection, select [Unprotect all images in folder] or [Unprotect all images on card]. If you format the card (p.74), the protected images will also be erased. Movies can also be protected.
L Erasing Images You can either select and erase unnecessary images one by one or erase them in one batch. Protected images (p.372) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them. Erasing an image shot in RAW+JPEG will erase both the RAW and JPEG images. Erasing a Single Image 1 Play back the image to be erased. the button.
L Erasing Images [Select and erase images]. 2 Select An image is displayed. the images to be erased. 3 Select Turn the <5> dial to select the image to be erased, then press <0>. A checkmark will be displayed on the upper left of the screen. By pressing the button, you can select images from a three-image display. To return to the single-image display, press the button. To select another image to be erased, repeat step 3. the images. 4 Erase Press the button.
L Erasing Images 3 Specifying the Range of Images to be Erased You can specify the range of images to erase all the images in the range at once. 1 Select [Select range]. Select [Select range] in [31: Erase images], then press <0>. the range of images. 2 Specify Select the first image, then press <0>. Select the last image, then press <0>. The [X] icon will appear on the selected images. To cancel the selection, repeat this step. To return to the previous screen, press the button.
W Digital Print Order Format (DPOF) DPOF (Digital Print Order Format) enables you to print images recorded on the card according to your printing instructions such as the image selection, quantity to print, etc. You can print multiple images in one batch or create a print order for a photofinisher. You can set the print settings such as print type, date imprinting, file number imprinting, etc. The print settings will be applied to all the images specified for printing.
W Digital Print Order Format (DPOF) [Print type] K Standard Print type Date File number L Index [Date] [File No.] Prints one image on one sheet. Multiple thumbnail images are printed on one sheet. K Both Prints both the standard and index prints. L On [On] imprints the recorded date of the captured image. Off On [On] imprints the file number. Off the setting. 4 Exit Press the button. The print order screen will reappear. Next, select [Sel.
W Digital Print Order Format (DPOF) 3 Specifying Images for Printing Selecting Images Select and specify the images one by one. By pressing the button, you can select images from a three-image display. To return to the single-image display, press the button. Press the button to save the print order to the card. [Standard] [Both] Press the keys to set the number of copies to be printed for the displayed image.
W Digital Print Order Format (DPOF) the range of images. 2 Specify Select the first image, then press <0>. Select the last image, then press <0>. The [X] icon will appear on the selected images. One copy of all the specified images will be set for printing. To cancel the selection, repeat this step. To return to the previous screen, press the button. • All Images in a Folder Select [Mark all in folder] and select the folder.
p Specifying Images for a Photobook You can specify up to 998 images to be printed in a photobook. When you use EOS Utility (EOS software) to transfer images to a computer, the specified images will be copied to a dedicated folder. This function is useful for ordering photobooks online. 3 Specifying One Image at a Time 1 Select [Photobook Set-up]. Under the [x1] tab, select [Photobook Set-up], then press <0>. [Select images]. 2 Select An image is displayed. the image to be specified.
p Specifying Images for a Photobook 3 Specifying the Range You can specify the range of images to select all the images in the range at once. 1 Select [Select range]. In [Multiple] under [x1: Photobook Set-up], select [Select range], then press <0>. the range of images. 2 Specify Select the first image, then press <0>. Select the last image, then press <0>. The [X] icon will appear on the selected images. To cancel the selection, repeat this step.
p Specifying Images for a Photobook 3 Specifying All Images in a Folder or on a Card You can also specify all the images in a folder or on a card at once. When [Multiple] under [x1: Photobook Set-up] is set to [All images in folder] or [All images on card], all the images in the folder or on the card will be specified. To clear your selections, select [Clear all in folder] or [Clear all on card]. RAW images and movies cannot be specified.
B: Shooting Information Display The information displayed varies depending on the shooting mode and settings.
B: Shooting Information Display Shooting information display • Detailed information Exposure compensation amount Aperture Histogram (Brightness/RGB) Shooting date and time Shutter speed ISO speed Shooting mode Scroll bar Highlight tone priority White balance Metering mode File size Auto Lighting Optimizer Flash exposure compensation amount / Multi Shot Noise Reduction White balance correction Picture Style/Settings Image-recording quality * When you shoot in the 1+73 image-recording quality
B: Shooting Information Display • Lens / Histogram information Histogram display (Brightness) Lens name Focal length Histogram display (RGB) • White balance information • Picture Style information 1 • Picture Style information 2 • Color space / Noise reduction information • Lens aberration correction information If you used GPS Receiver GP-E2 to record GPS information for the image, the “GPS information” screen will also appear.
B: Shooting Information Display Sample Movie Information Display Playback Aperture Shutter speed Movie shooting mode/ Time-lapse movie Creative filters/ Movie digital IS Recording format Movie recording size Frame rate Movie file size Shooting time, Playback time Compression method * If manual exposure is used, the shutter speed, aperture, and ISO speed (when set manually) will be displayed. * The icon will be displayed for video snapshots.
B: Shooting Information Display Highlight Alert When the shooting information is displayed, overexposed and clipped highlights will blink. To obtain a better result for the blinking areas where you want the gradation to be faithfully reproduced, set the exposure compensation to a negative amount and shoot again. Histogram The brightness histogram shows the exposure level distribution and overall brightness. The RGB histogram is for checking the color saturation and gradation.
11 Post-Processing Images After taking a picture, you can apply a filter effect, resize the JPEG image (reduce the pixel count), or crop the JPEG image. The camera may not be able to process images taken with another camera. Post-processing of images as described in this chapter cannot be performed when the camera is connected to a computer with an interface cable.
U Applying Creative Filter Effects You can apply the following Creative filters to an image and save it as a new image: Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, Water painting effect, Toy camera effect, and Miniature effect. 1 Select [Creative filters]. Under the [x1] tab, select [Creative filters], then press <0>. An image will be displayed. an image. 2 Select Select the image you want to apply a filter to.
U Applying Creative Filter Effects the image. 5 Save Select [OK] to save the image. Check the destination folder and image file number, then select [OK]. To apply a filter to another image, repeat steps 2 to 5. When shooting 1+73 or 1 image, the Creative filter will be applied to the 1 image and the image will be saved as a JPEG image. If an aspect ratio was set for a 1 image and the filter effect is applied to it, the image will be saved in the aspect ratio that is set. Dust Delete Data (p.
U Applying Creative Filter Effects Y Art bold effect Makes the photo look like an oil painting and the subject look more three-dimensional. You can adjust the contrast and saturation. Note that subjects such as the sky or white walls may not be rendered with a smooth gradation and may look irregular or have significant noise. Z Water painting effect Makes the photo look like a watercolor painting with soft colors. You can control the color density by adjusting the filter effect.
S Resizing JPEG Images You can resize a JPEG image to make the pixel count lower and save it as a new image. Resizing an image is possible only with JPEG 3, 4, and a images. JPEG b and RAW images cannot be resized. 1 Select [Resize]. Under the [32] tab, select [Resize], then press <0>. An image will be displayed. an image. 2 Select Select the image you want to resize. By pressing the button, you can switch to the index display and select an image. the desired image size.
S Resizing JPEG Images Resize Options by Original Image Quality Available Resize Settings Original Image Quality 4 a 3 k k k k k 4 b k a Image Sizes The image sizes by aspect ratios are shown in the table below. Image Quality Aspect Ratio and Pixel Count (Approx.) 3:2 16:9 1:1 4 3984x2656 3552x2664 (10.6 megapixels) (9.5 megapixels) 4:3 3984x2240* (8.9 megapixels) 2656x2656 (7.1 megapixels) a 2976x1984 (5.9 megapixels) 2656x1992 (5.3 megapixels) 2976x1680* (5.
N Cropping JPEG Images You can crop a captured JPEG image and save it as another image. Images shot in RAW cannot be cropped. JPEG images shot with 1+73 can be cropped. 1 Select [Cropping]. Under the [x2] tab, select [Cropping], then press <0>. An image will be displayed. an image. 2 Select Select the image you want to crop. By pressing the button, you can switch to the index display and select an image. the cropping frame size, 3 Set aspect ratio, position, and tilt correction.
N Cropping JPEG Images Moving the Cropping Frame Press the or keys. The cropping frame will move up, down, left, or right. You can also touch the cropping frame and drag it to the desired position. Correcting the Tilt Press the button. Check the tilt with the displayed grid, then turn the <5> dial to correct the tilt. You can correct the tilt up to ±10° in 0.1° increments. If you tap on [8] or [9] on the upper left of the screen, the tilt will be corrected in 0.
12 Customizing the Camera You can make fine adjustments to various camera functions to suit your picture-taking preferences with Custom Functions. Custom Functions can be set and work only in Creative Zone modes.
3 Setting Custom FunctionsN 1 Custom Function number Select [Custom Functions(C.Fn)]. Under the [54] tab, select [Custom Functions(C.Fn)], then press <0>. the Custom Function 2 Select number. Press the keys to select the Custom Function number, then press <0>. the setting as desired. 3 Change Press the keys to select the desired setting (number), then press <0>. Repeat steps 2 to 3 if you want to set other Custom Functions.
3 Setting Custom FunctionsN Custom Functions C.Fn I: Exposure 1 Exposure level increments 2 ISO expansion 3 Exposure compensation auto cancel p.402 A LV Shooting k Movie Shooting k k k k k k k k C.Fn II: Image 4 Highlight tone priority p.403 C.Fn III: Autofocus/Drive 5 AF-assist beam firing 6 AF area selection method 7 Auto AF point selection: Color Tracking 8 AF point display during focus 9 Viewfinder display illumination 10 Mirror lockup p.404 k* p.405 p.
3 Custom Function Setting ItemsN Custom Functions are organized into four groups based on the function type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus/Drive, C.Fn IV: Operation/Others. C.Fn I: Exposure C.Fn-1 Exposure level increments 0: 1/3-stop 1: 1/2-stop Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc. This is effective when you prefer to control the exposure in less fine increments than 1/3-stop increments.
3 Custom Function Setting ItemsN C.Fn II: Image C.Fn-4 Highlight tone priority 0: Disable 1: Enable Highlight details are improved. The dynamic range is expanded from the standard 18% gray to bright highlights. The gradation between the grays and highlights becomes smoother. With setting 1, the Auto Lighting Optimizer (p.175) is automatically set to [Disable] and the setting cannot be changed. With setting 1, noise (grainy image, banding, etc.) may become slightly more noticeable than with setting 0.
3 Custom Function Setting ItemsN C.Fn III: Autofocus/Drive C.Fn-5 AF-assist beam firing Enables or disables the built-in flash’s AF-assist beam or the EOSdedicated external Speedlite’s AF-assist beam. 0: Enable The AF-assist beam will be emitted when necessary. 1: Disable The AF-assist beam will not be emitted. This prevents the AFassist beam from disturbing others. 2: Enable external flash only If an external Speedlite is attached, it will emit the AF-assist beam when necessary.
3 Custom Function Setting ItemsN C.Fn-7 Auto AF point selection: Color Tracking Use this function to autofocus by recognizing colors equivalent to skin tones. This function works when the AF area selection mode is set to Zone AF (manual selection of zone), Large Zone AF (manual selection of zone), or Automatic selection AF. 0: Enable The camera selects AF points automatically based on AF information and information on colors equivalent to skin tones.
3 Custom Function Setting ItemsN C.Fn-9 Viewfinder display illumination You can set whether the AF points in the viewfinder will light up in red when focus is achieved. 0: Auto The AF points automatically light up in red under low light. 1: Enable The AF points light up in red regardless of the ambient light level. 2: Disable The AF points do not light up in red. When AI Servo AF is set, the AF points will not light up in red even when focus is achieved.
3 Custom Function Setting ItemsN C.Fn IV: Operation/Others C.Fn-11 Warnings z in viewfinder When any of the following functions are set, the icon can be displayed on the viewfinder’s bottom left (p.34). The icon will also appear on the Quick Control screen (p.58). Select the function for which you want the warning icon to appear, press <0> to add a checkmark [X], then select [OK]. When monochrome V is set: If the Picture Style is set to [Monochrome] (p.162), the warning icon will appear.
3 Custom Function Setting ItemsN C.Fn-13 Retract lens on power off This is the setting for the lens retraction mechanism when a geardriven STM lens (such as EF40mm f/2.8 STM) is attached to the camera. You can set it to retract the extended lens automatically when the camera’s power switch is set to <2>. 0: Enable 1: Disable With auto power off, the lens will not retract regardless of the setting. Before detaching the lens, make sure that it is retracted.
Custom ControlsN You can assign frequently-used functions to camera buttons or dials according to your preferences for easy operations. 1 Select [Custom Functions(C.Fn)]. Under the [54] tab, select [Custom Functions(C.Fn)], then press <0>. [14: Custom Controls]. 2 Select The Custom Controls setting screen will appear. a camera button or dial. 3 Select Select a camera button or dial, then press <0>. The name of the camera control and the assignable functions will be displayed.
Custom ControlsN Assignable Functions to Camera Controls Function AF Exposure Flash Images Operation a Metering and AF start b AF stop q Metering start t AE lock/FE lock A AE lock A AE lock (while button pressed) d FE lock f Exposure compensation (hold button, turnS) y Flash exposure compensation 0/3 Flash function settings g Image quality M Menu display j No function (disabled) Page 410 410 V r k k k k k k 411 k k 412 412 412 k a: Metering and AF start When you press the
Custom ControlsN t s k k k k k k k A: AE lock k When you press the button assigned to this function, you can lock the exposure (AE lock) while the metering timer is active. Useful when you want to set the focus and exposure separately. k k k t: AE lock/FE lock Normal shooting (No flash) When you press the button assigned to this function, you can lock the exposure (AE lock) while the metering timer is active.
Custom ControlsN y: Flash exposure compensation Press <0> to display the exposure compensation setting screen (p.218) for the attached (built-in or external) flash unit on the LCD monitor. 0/3: Flash function settings Press <0> to display the flash function setting screen (p.225) on the LCD monitor. g: Image quality Press <0> to display the image-recording quality setting screen (p.152) on the LCD monitor. M: Menu display Press <0> to display the menu on the LCD monitor.
3 Registering My MenuN Under My Menu tab, you can register menu items and Custom Functions whose settings you change frequently. You can also name the registered menu tabs, and press the button to display the My Menu tab first. Creating and Adding My Menu Tab 1 Select [Add My Menu tab]. Under the [9] tab, select [Add My Menu tab], then press <0>. [OK]. 2 Select The [MY MENU1] tab is created. You can create up to five menu tabs by repeating steps 1 and 2.
3 Registering My MenuN 2 Select [Select items to register]. the desired items. 3 Register Select the desired item, then press <0>. Select [OK] on the confirmation dialog. You can register up to six items. To return to the screen in step 2, press the button. My Menu Tab Settings You can sort and delete items under the menu tab, and rename or delete the menu tab. Sort registered items You can change the order of the registered items in My Menu.
3 Registering My MenuN Delete tab You can delete the My Menu tab currently displayed. Select [Delete tab] to delete the [MY MENU*] tab. Rename tab You can rename the My Menu tab from [MY MENU*]. 1 Select [Rename tab]. text. 2 Enter Press the button to delete any unnecessary characters. Press the or keys to move the n and select the desired character. Then press <0> to enter it. By selecting [E], you can change the input mode. You can enter up to 16 characters.
3 Registering My MenuN Deleting All My Menu Tabs / Deleting All Items You can delete all the created My Menu tabs or My Menu items registered under them. Delete all My Menu tabs You can delete all My Menu tabs you created. When you select [Delete all My Menu tabs], all the tabs from [MY MENU1] to [MY MENU5] will be deleted and the [9] tab will revert to its default. Delete all items You can delete all the items registered under the [MY MENU1] to [MY MENU5] tabs. The tab(s) will remain.
3 Registering My MenuN Menu Display Settings You can select [Menu display] to set the menu screen that is to appear first when you press the button. Normal display Displays the last displayed menu screen. Display from My Menu tab Displays with the [9] tab selected. Display only My Menu tab Only the [9] tab is displayed. (The z, 3, 5, and s tabs will not be displayed.
13 Reference This chapter provides reference information for camera features, system accessories, etc. Certification Logo Select [55: Certification Logo Display]* and press <0> to display some of the logos of the camera’s certifications. Other certification logos can be found in this Instruction Manual, on the camera body, and on the camera’s package. * Displayed under the [54] tab during movie shooting.
B Button Functions When you press the button with the camera being ready to shoot, you can toggle the display between the electronic level and Quick Control screen. [z button display options] under the [53] tab enables you to select the options displayed when the button is pressed. Select the desired display option, then press <0> to add a checkmark . After completing the selection, select [OK], then press <0>.
3 Checking the Battery Information You can check the conditions of the battery you are using on the LCD monitor. Select [Battery info.]. Under the [53] tab, select [Battery info.], then press <0>. The battery information screen will appear. Battery position Battery model or household power source being used. The battery level (p.46) is displayed. Battery’s recharge performance level is displayed in three levels. (Green) : Battery’s recharge performance is fine.
Using a Household Power Outlet You can power the camera with a household power outlet by using the DC Coupler DR-E18 and AC Adapter AC-E6N (each sold separately). 1 Connect the DC coupler’s plug. Connect the DC coupler’s plug to the AC Adapter’s socket. the power cord. 2 Connect Connect the power cord as shown in the illustration. After using the camera, unplug the power plug from the power outlet. the DC coupler.
Remote Control Shooting Wireless Remote Control BR-E1 (Sold Separately) You can use a Bluetooth connection with Bluetooth low energy technology-compatible Wireless Remote Control BR-E1 for remote control operations. In order to use the BR-E1, you first need to pair the camera and remote controller (registering the device to the camera). Pairing 1 Select [Wireless communication settings]. Under the [51] tab, select [Wireless communication settings], then press <0>. 2 Select [Bluetooth function].
Remote Control Shooting [Pairing]. 5 Select Select [Pairing], then press <0>. Press and hold the button and button simultaneously for 3 sec. or more. Pairing starts. After the pairing is complete, the remote controller is registered to the camera. For operations after the pairing is complete, refer to Wireless Remote Control BR-E1’s Instruction Manual.
Remote Control Shooting 2 Select [Bluetooth function]. [Check/clear connection 3 Select info]. 4 Press the button. Bluetooth address of the remote controller [Connecting...] is displayed when the remote controller is not being operated. the connection information. 5 Clear Select [OK], then press <0>. The remote controller’s connection information will be cleared.
Remote Control Shooting Remote Controller RC-6 (Sold Separately) This remote controller enables you to take pictures wirelessly up to approx. 5 meters/16.4 feet away from the camera. You can either shoot immediately or with a 2-sec. delay. Remote control sensor Set the drive mode to (p.149). Point the remote controller toward the camera’s remote control sensor, then press the transmit button. The camera will autofocus.
Remote Control Shooting F Remote Switch RS-60E3 (Sold Separately) Remote Switch RS-60E3 comes with an approx. 60 cm/2.0 ft cord. When connected to the camera’s remote control terminal, it can be pressed halfway and completely, just like the shutter button. Using the Eyepiece Cover When you take a picture without looking through the viewfinder, such as when you use the self-timer, bulb exposure, or a remote switch, stray light entering the viewfinder may cause the picture to look dark.
H Using Eye-Fi Cards With a commercially-available Eye-Fi card already set up, you can automatically transfer captured images to a computer or upload them to an online service via a wireless LAN. The image transfer is a function of the Eye-Fi card. For instructions on how to set up and use the Eye-Fi card or to troubleshoot any image transfer problems, refer to the Eye-Fi card’s instruction manual or contact the card manufacturer.
H Using Eye-Fi Cards the [Access point SSID:]. 5 Check Check that an access point is displayed for [Access point SSID:]. You can also check the Eye-Fi card’s MAC address and firmware version. Press the button to exit the menu. the picture. 6 Take The picture is transferred and the icon switches from gray (not connected) to one of the icons in the sequence below. For transferred images, O is displayed in the shooting information Transmission status icon (p.385).
Function Availability Table by Shooting Mode Still Photo Shooting in Basic Zone Modes: A7C2345 o: Set automatically k: User selectable Function Image quality settings selectable : Not selectable/Disabled A 7 C 2 3 4 5 k k k k k k k o o o o o o o Aspect ratio ISO speed Picture Style Automatically set/Auto Manually set Automatically set D D D D D D D Manual selection k k Ambience-based shots Background blur Brightness k k k k Color tone Auto White balance Q Q Q Q Q Q Q
Function Availability Table by Shooting Mode Function AF operation (Viewfinder shooting) 7 C 2 3 4 o*2 o o 5 o*2 AI Servo AF o*2 o o*2 o o*2 o o o o k k o k k k k o k k o k k k k o k k High-speed continuous shooting k Low-speed continuous shooting k Self-timer k Automatic firing k Flash on (Fires at all times) k Flash off k Red-eye reduction k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k o o o o o k k k k k k k k k k AI Focus A
Function Availability Table by Shooting Mode Still Photo Shooting in Basic Zone Modes: 8 o: Set automatically k: User selectable Function Image quality settings selectable : Not selectable/Disabled 8 q C P x 6 F G k k k k k k*1 k*1 o o o o o o o Aspect ratio ISO speed Picture Style Automatically set/Auto Manually set Automatically set D D D D D D D Manual selection Ambience-based shots Background blur k Brightness Color tone Auto White balance Q k k k k k Q Qw Q k k Q Q
Function Availability Table by Shooting Mode Function AF operation (Viewfinder shooting) One-Shot AF C P o 8 x 6 o o F o G o*3 o o o o k k o k k o k k o k k k k k o k k k k k k k k k k o k k k k o o o*3 AI Servo AF AI Focus AF AF operation (Live One-Shot AF View shooting) Servo AF AF area selection mode AF q o*3 AF point selection AF-assist beam o k k o o k k k k o o o k k k k k k k k k k k k k k k k k k k k k k o o o Program shift Exposure compensation Exposure AEB A
Function Availability Table by Shooting Mode Still Photo Shooting in Basic Zone Modes: v o: Set automatically k: User selectable Function Image quality settings selectable*1 : Not selectable/Disabled v G W X Z H c A B C D k k k k k k k k k k o o o o o o o o o o Aspect ratio ISO speed Picture Style Automatically set/Auto Manually set Automatically set PPDPPPDPPP Manual selection Ambience-based shots Background blur Brightness Color tone Auto White balance Q Q Q Q Q Q Q Q Q
Function Availability Table by Shooting Mode Function AF operation One-Shot AF (Viewfinder AI Servo AF shooting) AI Focus AF AF operation (Live One-Shot AF View shooting) Servo AF v G W X Z H c o*3 o*3 o o*3 o*3 o o o o o o o AF area selection mode k k o k k o o o k k o k k o o o k k k k k k k k k k k k k k Flash on (Fires at all times) k Flash off k Built-in flash Red-eye reduction k k k k k k k k k k k k k k k k k k k k k k k k k k o o o o o AF AF point selection AF-assis
Function Availability Table by Shooting Mode Still Photo Shooting in Creative Zone Modes o: Set automatically k: User selectable Function Image quality settings selectable Aspect ratio ISO speed Picture Style Automatically set/Auto Manually set Automatically set Manual selection Creative filters*1*2 Auto White balance Preset Custom Correction/Bracketing Auto Lighting Optimizer Peripheral illumination correction Lens aberration correction Chromatic aberration correction Distortion correction Diffractio
Function Availability Table by Shooting Mode AF operation (Viewfinder shooting) Function d s f a One-Shot AF k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k AI Servo AF AI Focus AF AF operation (Live One-Shot AF View shooting) Servo AF AF area selection mode*3 AF AF point selection AF-assist beam Program shift Exposure compensation Exposure AEB
Function Availability Table by Shooting Mode Movie Shooting o: Set automatically k: User selectable Function A 7 C 2 3 4 y d u Select movie recording k size k k k k k k k k k k k k k Digital zoom : Not selectable/Disabled 5 8 v s f a k o k *1 M k k k k k k k k o HDR movie shooting k k k k k k k k k k k k k o o o k Picture Automatically set DDDDDDDDP k Style Manual selection k k k k k k k QQQQQQQQQ k k k k k k k k k k k k k k k k
Function Availability Table by Shooting Mode Function 2 3 4 5 8 v y d u s f a k M o o o o o o o o o o o o o Face+Tracking k k k k k k k k k k k k k Smooth zone k k k k k k k k k k k k k Live 1-point AF k k k k k k k k k k k k k Manual focusing (MF) k k k k k k k k k k k k k Movie Servo AF k k k k k k k k k k k k k Exposure compensation k k k *2 AE lock k k k *3 Metering AF A 7 C Program shift Exposure
System Map ST-E2 ST-E3-RT Eyepiece Extender EP-EX15II 270EX II 430EX III-RT/ 430EX III 600EX II-RT Macro Ring Lite MR-14EX II Macro Twin Lite MT-24EX Bundled Accessories Magnifier MG-Ef Eyecup Ef Rubber Frame Ef Strap E-series Dioptric Adjustment Lenses Angle Finder C Semi Hard Case EH26-L/EH27-L Battery Pack LP-E17 Battery Charger LC-E17E AC Adapter AC-E6N*1 Protecting Cloth PC-E1 Hand Strap E2 440 DC Coupler DR-E18*1
System Map GPS Receiver GP-E2*2 Wireless Remote Control BR-E1 Remote Controller RC-6 Remote Timer Remote Switch Controller RS-60E3 TC-80N3 EF lenses EF-S lenses Remote Controller Adapter RA-E3 HDMI Cable HTC-100 (2.9 m/9.5 ft.) TV/Video Directional Stereo Microphone DM-E1 Interface Cable IFC-400PCU (1.3 m/4.3 ft.) Interface Cable IFC-200U/500U (1.9 m/6.2 ft.) / (4.7 m/15.4 ft.
3 Menu Settings Viewfinder Shooting (Basic Zone Modes) z: Shooting 1 (Red) Page Image quality 73/83/74/84/7a/8a/b/ 1+73*/1* 152 Image review time Off / 2 sec. / 4 sec. / 8 sec. / Hold 325 Release shutter without card Enable / Disable 324 Red-eye reduction Disable / Enable 217 Interval timer Disable / Enable (Interval / Number of shots) Enable / Disable Live View shooting * Not selectable in the <8: FG> and modes.
3 Menu Settings Viewfinder Shooting and Live View Shooting (Creative Zone Modes) z: Shooting 1 (Red) Page Image quality 73/83/74/84/7a/8a/b/1+73/1 152 Image review time Off / 2 sec. / 4 sec. / 8 sec.
3 Menu Settings z: Shooting 3 (Red) Page Metering mode q Evaluative metering / w Partial metering / r Spot metering / e Center-weighted average metering 203 Color space sRGB / Adobe RGB 187 Picture Style DAuto / PStandard / QPortrait / RLandscape / uFine Detail / SNeutral / UFaithful / VMonochrome / WUser Defined 1-3 161 White balance Q (Ambience priority) / Qw (White priority) / W/E/R/Y/U/D/O 169 Custom White Balance Manual setting of white balance 171 White balance correction: B/A/M/G bia
3 Menu Settings z: Shooting 6* (Red) Page AF method u+Tracking / Smooth zone / Live 1-point AF 259 Touch shutter Disable / Enable 269 Metering timer 4 sec. / 8 sec. / 16 sec. / 30 sec. / 1 min. / 10 min. / 30 min. 255 Grid display Off / 3x3 l / 6x4 m / 3x3+diag n * The [z6] tab appears in Live View shooting.
3 Menu Settings x: Playback 3 (Blue) Page AF point display Disable / Enable 388 Histogram display Brightness / RGB 389 Control over HDMI Disable / Enable 370 Create and select a folder 327 Numbering: Continuous / Auto reset 329 Manual reset 331 Auto rotate OnzD / OnD / Off 334 Format card Erase data on the card by formatting 74 Eye-Fi settings Displayed when a commercially-available Eye-Fi card is inserted 428 5: Set-up 1 (Yellow) Select folder File numbering Wi-Fi settings: Wi-F
3 Menu Settings When using a wireless communication function, be sure to check the countries and areas of use, and observe the laws and regulations of the country or region. [51: Wireless communication settings] cannot be selected if the camera is connected to a computer, GPS receiver, or another device with an interface cable. 5: Set-up 2 (Yellow) Page Auto power off 10 sec/30 sec / 30 sec. / 1 min. / 2 min. / 4 min. / 8 min. / 15 min.
3 Menu Settings Cautions for Using GPS Receiver GP-E2 (sold separately) Check if your country or area allows the use of GPS and follow any legal regulations. Update the GP-E2’s firmware to Version 2.0.0 or later. (Using the cable for connection is not possible with firmware versions earlier than Version 2.0.0.) When updating the firmware, an interface cable (sold separately, p.441) must be used. For how to update the GP-E2’s firmware, refer to the Canon website.
3 Menu Settings 5: Set-up 5*1 (Yellow) Certification Logo Display*2 Page Displays some of the logos of the camera’s certifications 419 z firmware ver.*3 For updating the firmware *1: Not displayed for movie shooting. *2: Displayed under the [54] tab during movie shooting. *3: Not displayed for Live View shooting. - To prevent an inadvertent update of the firmware, selecting [z firmware ver.] will disable touch control.
3 Menu Settings k Movie Shooting z: Shooting 1 (Red) Page Movie recording size • 1920x1080 / 1280x720 / 640x480 • NTSC: 59.94p / 29.97p / 23.98p PAL: 50.00p / 25.00p • Standard / Light 287 Digital zoom Disable / Approx.
3 Menu Settings z: Shooting 3 (Red) Page Picture Style DAuto / PStandard / QPortrait / RLandscape / uFine Detail / SNeutral / UFaithful / VMonochrome / WUser Defined 1-3 161 White balance Q (Ambience priority) / Qw (White priority) / W/E/R/Y/U/D/O 169 Custom White Balance Manual setting of white balance 171 B/A/M/G bias, 9 levels each 173 White balance shift z: Shooting 4* (Red) Movie Servo AF Enable / Disable 315 AF method u+Tracking / Smooth zone / Live 1-point AF 316 Metering time
Troubleshooting Guide If a problem occurs with the camera, first consult this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center. Power-Related Problems The battery does not recharge. Do not use any battery other than genuine Canon Battery Pack LP-E17. The battery charger’s lamp blinks.
Troubleshooting Guide [Battery communication error. Does this battery/do these batteries display the Canon logo?] is displayed. Do not use any battery other than genuine Canon Battery Pack LP-E17. Remove and install the battery again (p.40). If the electrical contacts are dirty, use a soft cloth to clean them. The battery becomes exhausted quickly. Use a fully-charged battery (p.38). The battery performance may have degraded. See [53: Battery info.
Troubleshooting Guide Shooting-Related Problems The lens cannot be attached. The camera cannot be used with EF-M lenses (p.51). The viewfinder is dark. Install a recharged battery in the camera (p.38). No images can be shot or recorded. Make sure the card is properly inserted (p.41). Slide the card’s write-protect switch to the Write/Erase setting (p.41). If the card is full, replace the card or delete unnecessary images to make space (p.41, 375).
Troubleshooting Guide The image is out of focus or blurred. Set the lens’s focus mode switch to (p.51). Press the shutter button gently to prevent camera shake (p.53-54). If the lens has an Image Stabilizer, set the IS switch to <1>. In low light, the shutter speed may become slow. Use a faster shutter speed (p.192), set a higher ISO speed (p.158), use flash (p.216), or use a tripod. There are fewer AF points.
Troubleshooting Guide I cannot lock the focus and recompose the shot. Set the AF operation to One-Shot AF. Focus lock is not possible in the AI Servo AF mode or when servo takes effect in AI Focus AF mode (p.124). Horizontal stripes appear, or the exposure or color tone look strange. Horizontal stripes (noise) or irregular exposures can be caused by fluorescent lighting, LED lighting, or other light sources during viewfinder or Live View shooting.
Troubleshooting Guide ISO 100 cannot be set. Under [54: Custom Functions(C.Fn)], if [4: Highlight tone priority] is set to [1:Enable], ISO 100 cannot be set. If [0:Disable] is set, ISO 100 can be set (p.403). This also applies to movie shooting (p.320). Expanded ISO speeds cannot be selected. Under [54: Custom Functions(C.
Troubleshooting Guide The built-in flash rises by itself. In shooting modes ( <2> <4> <8: qC6> ) whose default setting is (Built-in autoflash), the built-in flash will be raised automatically when necessary. In the <8: xG> and modes, when you press the shutter button halfway under low-light conditions, the built-in flash may be raised automatically and emit the AF-assist beam. The built-in flash does not fire.
Troubleshooting Guide The camera makes a noise when it is shaken. A small noise may be heard when the camera’s internal mechanism moves slightly. The shutter makes two release sounds during Live View shooting. If you use flash, the shutter will make two release sounds each time you shoot (p.244). During Live View shooting, a white s or red E icon is displayed. It indicates that the camera’s internal temperature is high.
Troubleshooting Guide The ISO speed cannot be set for movie shooting. In shooting modes other than , the ISO speed is set automatically. In the mode, you can manually set the ISO speed (p.281). The exposure changes during movie shooting. If you change the shutter speed or aperture during movie shooting, the changes in the exposure may be recorded. Zooming the lens during movie shooting may cause changes in the exposure regardless of whether the lens’s maximum aperture changes or not.
Troubleshooting Guide Wi-Fi Wi-Fi cannot be set. If the camera is connected to a computer, GPS receiver, or other device with an interface cable, Wi-Fi functions cannot be set. ([51: Wireless communication settings] will be grayed out.) Disconnect the interface cable before setting any functions. Refer to the Wi-Fi (Wireless Communication) Function Instruction Manual. Operation Problems I cannot change the setting with the <6>, <5>, or touch screen. Set the switch downward (lock release, p.57).
Troubleshooting Guide Display Problems The LCD monitor does not turn on or suddenly turns off. If there is dust on top of the eyepiece cover (p.427), the LCD monitor may not turn on or may suddenly turn off, due to incorrect operation of the display-off sensor. If this occurs, remove the dust. If the LCD monitor does not turn on with Eyepiece Extender EP-EX15ll (sold separately) or Magnifier MG-Ef (sold separately) attached to the viewfinder, set [52: LCD auto off] to [Disable] (p.338).
Troubleshooting Guide The shooting date and time displayed are incorrect. Make sure the correct date and time are set (p.47). Check the time zone and daylight saving time (p.47). The date and time are not in the image. The shooting date and time do not appear in the image. The date and time are recorded in the image data as shooting information. When printing, you can imprint the date and time in the picture, using the date and time recorded in the shooting information (p.378). [###] is displayed.
Troubleshooting Guide Playback Problems Part of the image blinks in black. It is the highlight alert (p.389). Overexposed areas with clipped highlight will blink. The image cannot be erased. If the image is protected, it cannot be erased (p.372). The movie cannot be played back. Movies edited with a computer cannot be played back with the camera. Operation sound and mechanical sound can be heard during movie playback.
Troubleshooting Guide There are multiple movie files for a single movie shoot. If the movie file size reaches 4 GB, another movie file will be created automatically (p.289). However, if you use an SDXC card formatted with the camera, you can record a movie in a single file even if it exceeds 4 GB. My card reader does not recognize the card. Depending on the card reader used and the computer’s operating system, SDXC cards may not be correctly recognized.
Troubleshooting Guide Dots of light appear on the image. White, red, blue, or other colored dots of light may appear on images if the sensor is affected by cosmic rays, etc. Their appearance may be suppressed if you perform [Clean nowf] under [54: Sensor cleaning] (p.339). Sensor Cleaning Problems The shutter makes a sound during sensor cleaning. When you select [Clean nowf], the shutter will make a mechanical sound, but no picture is taken (p.339). Automatic sensor cleaning does not work.
Error Codes Error number If there is a problem with the camera, an error message will appear. Follow the onscreen instructions. Cause and countermeasures Number 01 02 Error Message and Solution Communications between the camera and lens is faulty. Clean the lens contacts. Clean the electrical contacts on the camera and lens, use a Canon lens, or remove and install the battery again (p.27, 28, 40). Card cannot be accessed. Reinsert/change card or format card with the camera.
Specifications • Type Type: Recording media: Image sensor size: Compatible lenses: Lens mount: Digital, single-lens reflex, AF/AE camera with built-in flash SD/SDHC*/SDXC* memory cards * UHS-I cards supported Approx. 22.3 x 14.9 mm Canon EF lenses (including EF-S lenses) * Excluding EF-M lenses (35mm-equivalent angle of view is that of a lens with approx. 1.6x the focal length indicated.) Canon EF mount • Image Sensor Type: Effective pixels: Aspect ratio: Dust delete feature: CMOS sensor Approx. 24.
Specifications Noise reduction: Automatic image brightness correction: Highlight tone priority: Lens aberration correction: Applicable to long exposures and high ISO speed shots Auto Lighting Optimizer provided Provided Peripheral illumination correction, Chromatic aberration correction, Distortion correction, Diffraction correction • Viewfinder Type: Eye-level pentamirror Field of view coverage: Vertical/Horizontal approx. 95% (with Eye point approx.
Specifications • Exposure Control Metering mode: Metering brightness range: Shooting mode: ISO speed (Recommended exposure index): ISO speed settings: Exposure compensation: AE lock: Flicker reduction: Interval timer: Bulb timer: 470 63-zone TTL open-aperture metering using 7560-pixel RGB plus IR metering sensor • Evaluative metering (linked to all AF points) • Partial metering (approx. 6.0% of viewfinder at center) • Spot metering (approx. 3.
Specifications • Shutter Type: Shutter speed: Electronically-controlled, focal-plane shutter 1/4000 sec. to 30 sec. (total shutter speed range; available range varies by shooting mode), Bulb, X-sync at 1/200 sec. • Drive System Drive mode: Continuous shooting speed: Max. burst: Single shooting, High-speed continuous shooting, Low-speed continuous shooting, 10-sec. self-timer/ remote control, 2-sec. delay, 10-sec. delay with continuous shooting High-speed continuous shooting: Max. approx. 6.
Specifications • Flash Built-in flash: External Speedlite: Flash metering: Flash exposure compensation: FE lock: PC terminal: Flash control: Retractable, auto pop-up flash Guide No.: Approx. 12/39.4 (ISO 100, in meters/feet) Flash coverage: Approx. 17mm lens angle of view Recharge time: Approx. 3 sec.
Specifications • Movie Shooting Recording format: Movie: Audio: Recording size and frame rate: Compression method: Bit rate: Focus system: AF method: Movie Servo AF: Movie digital IS: Digital zoom: Focusing brightness range: MP4 * Time-lapse movie shooting: MOV MPEG-4 AVC / H.264 Variable (average) bit rate AAC Full HD (1920x1080): 59.94p/50.00p/29.97p/25.00p/ 23.98p HD (1280x720) : 59.94p/50.00p/29.97p/25.00p VGA (640x480) : 29.97p/25.
Specifications Metering mode: Metering brightness range: Exposure control: Exposure compensation: ISO speed (Recommended exposure index): ISO speed settings: HDR Movie Shooting: Creative filters for movies: Video snapshots: Sound recording: Grid display: Time-lapse movie: Still photo shooting: Center-weighted average and Evaluative metering with the image sensor * Automatically set by the AF method EV 0 - 20 (at room temperature, ISO 100, with centerweighted average metering) Autoexposure shooting (Pr
Specifications • Playback Image display format: Highlight alert: AF point display: Zoom magnification ratio: Image search: Image browsing methods: Image rotation: Image protection: Rating: Movie playback: Slide show: Background music: Single-image display (without shooting information), Single-image display (with basic information), Singleimage display (Shooting information displayed: Detailed information, Lens/histogram, White balance, Picture Style 1, Picture Style 2, Color space/noise reduction, Lens
Specifications • Interface DIGITAL terminal: Computer communication (Hi-Speed USB equivalent), GPS Receiver GP-E2, Connect Station CS100 connection Type C (Auto switching of resolution), CEC-compatible HDMI mini OUT terminal: External microphone IN 3.
Specifications • Battery Pack LP-E17 Type: Rated voltage: Battery capacity: Working temperature range: Working humidity: Dimensions (W x H x D): Weight: Rechargeable lithium-ion battery 7.2 V DC 1040 mAh For charging: 5°C - 40°C / 41°F - 104°F For shooting: 0°C - 40°C / 32°F - 104°F 85% or less Approx. 33.0 x 14.0 x 49.4 mm / 1.30 x 0.55 x 1.94 in. Approx. 45 g / 1.59 oz.
Trademarks Adobe is a trademark of Adobe Systems Incorporated. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. SDXC logo is a trademark of SD-3C, LLC. HDMI, HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Third party software This product includes third party software. expat.
Use of Genuine Canon Accessories Is Recommended This product is designed to achieve optimum performance when used with genuine Canon accessories. Therefore, using this product with genuine accessories is highly recommended. Canon shall not be liable for any damage to this product and/or accidents such as malfunction, fire, etc., caused by the failure of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
Only for European Union and EEA (Norway, Iceland and Liechtenstein) These symbols indicate that this product is not to be disposed of with your household waste, according to the WEEE Directive (2012/19/EU), the Battery Directive (2006/66/EC) and/or national legislation implementing those Directives.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
14 Software Start Guide / Downloading Images to a Computer This chapter describes the following: Overview of the software for EOS cameras How to download and install the software on a computer How to download and view the Software Instruction Manuals (PDF files) How to download images from the camera to a computer 487
Software Start Guide Software Overview This section describes an overview of various software applications for EOS cameras. An Internet connection is required to download and install the software. Download and installation are not possible in environments with no Internet connection. EOS Utility With the camera connected to a computer, EOS Utility enables you to transfer still photos and movies shot with the camera to the computer.
Software Start Guide Downloading and Installing the Software Do not connect the camera to a computer before you install the software. The software will not be installed correctly. Even if a previous version of the software is installed on your computer, follow the procedure below to install the latest version. (The previous version will be overwritten.) 1 Download the software. Connect to the Internet from a computer and access the following Canon website. www.canon.
Downloading and Viewing the Software Instruction Manuals (PDF Files) Internet connection is required to download the Software Instruction Manuals (PDF files). Download is not possible in environments with no Internet connection. 1 Download the Software Instruction Manuals (PDF files). Connect to the Internet and access the following Canon website. www.canon.com/icpd 2 View the Software Instruction Manuals (PDF files). Double-click a downloaded Instruction Manual (PDF file) to open it.
Downloading Images to a Computer You can use EOS software to download images from the camera to a computer. There are two ways to do this. Downloading by Connecting the Camera to the Computer 1 Install the software (p.489). an interface cable (sold 2 Use separately) to connect the camera to the computer. Connect the cable to the camera’s digital terminal with the cable plug’s icon facing the front of the camera. Connect the cord’s plug to the computer’s USB terminal.
Downloading Images to a Computer Downloading Images with a Card Reader You can use a card reader to download images to a computer. Install the software (p.489). 1 the card into the card 2 Insert reader. Digital Photo Professional to 3 Use download the images. Refer to the Digital Photo Professional Instruction Manual. When downloading images from the camera to a computer with a card reader without using EOS software, copy the DCIM folder on the card to the computer.
Index Numerics 10- or 2-sec. self-timer ..................149 1280x720 (movie) .........................287 1920x1080 (movie) .......................287 640x480 (movie) ...........................287 A A (Scene Intelligent Auto) ............84 AC adapter....................................422 Access lamp....................................42 Accessories.......................................3 Adobe RGB...................................187 AE lock..........................................
Index Candlelight....................................105 Cards ..............................8, 27, 41, 74 Card reminder ............................42 Formatting ..................................74 Low-level formatting ...................75 Troubleshooting....................43, 75 Write-protect switch....................41 Center-weighted average metering........................................204 Charger.....................................35, 38 Chromatic aberration correction ...
Index F FE lock ..........................................219 Feature guide..................................63 FEB (Flash exposure bracketing) ...226 File extension................................331 File name ......................................329 File size.........................153, 288, 386 Filter effects ..........................163, 166 Final image simulation ..........248, 283 Fine (image-recording quality) ........32 Firmware .......................................
Index I ICC profile.....................................187 Illumination (LCD panel) .................58 Image dust prevention ..................339 Image review time.........................325 Image-recording quality ................152 Images AF point display........................388 Auto playback...........................366 Auto rotation .............................334 Erasing .....................................375 File numbering..........................329 Highlight alert .....................
Index LOCK ..............................................57 Long (bulb) exposures ..................199 Long exposure noise reduction.....177 Low-speed continuous shooting ...147 M M (Manual exposure) ....................197 Macro photography .........................99 Magnifying images ................271, 349 Main Dial .........................................55 Manual exposure ..................197, 280 Manual focusing (MF) ...........146, 271 Manual reset .................................
Index N NFC ..............................................446 Night Portrait.................................106 Night scenes .........................106, 107 Noise reduction High ISO speed ........................176 Long exposures........................177 Nomenclature .................................28 Non-Canon flash units ..................222 Normal (Image-recording quality) ...32 NTSC ....................................287, 447 O ONE SHOT (One-Shot AF)...125, 257 P P (Program AE) .............
Index Sharpness.....................................165 Shooting information .....................385 Shooting mode guide ......................62 Shooting modes ..............................30 Av (Aperture-priority AE) ..........194 M (Manual exposure)................197 P (Program AE) ........................190 Tv (Shutter-priority AE).............192 A (Scene Intelligent Auto) .......84 7 (Flash Off).............................89 C (Creative Auto) .....................90 2(Portrait) .................
Index U USB (digital) terminal....................491 V Vari-angle LCD monitor ............44, 88 Vertical image auto rotation ..........334 Video snapshot album ..................303 Video snapshots ...........................303 Video system ................287, 369, 447 Viewfinder .......................................34 Dioptric adjustment.....................53 Electronic level ...........................78 Flicker detection .........................81 Grid...........................................
CANON INC. 30-2 Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Europe, Africa & Middle East CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands For your local Canon office, please refer to your warranty card or to www.canon-europe.com/Support The product and associated warranty are provided in European countries by Canon Europa N.V. The descriptions in this Instruction Manual are current as of December 2016.
