AXIS 1650 User’s Manual AXIS 1650 User’s Manual The Network Print Server for Canon Printers and Multifunctional Products * Including support for the host-based printing methods Canon Advanced Printing Technology Canon Advanced Raster Printing System and other printer types such as Canon BubbleJet 1
Safety Notices AXIS 1650 User’s Manual Safety Notices Take some time to read through the safety notices before installing the print server. Please observe all safety markings and instructions when using this product. Important: Observe “Important:” in the text to avoid operational impairment. Do not proceed until you have fully understood the implications.
AXIS 1650 User’s Manual Safety Notices Liability Every care has been taken in the preparation of this manual; if you detect any inaccuracies or omissions, please inform your local Axis office, which can be found on the cover of this document. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice.
AXIS 1650 User’s Manual Table of Contents About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 About Axis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Section 1 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Package Contents . . . . . .
AXIS 1650 User’s Manual Preface Thank you for purchasing the AXIS 1650. This product has been developed to connect your printer anywhere in your network, allowing all network users access to shared printer resources. About this Manual This manual is applicable for the AXIS 1650 print server with firmware version 1.00 or later, providing introductory information as well as detailed instructions on how to set up and manage the print server in various network environments.
AXIS 1650 User’s Manual Support Services Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your Axis reseller will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can: • • • • Download user documentation and firmware updates Find answers to previously resolved problems in the FAQ database.
AXIS 1650 User’s Manual Section 1 Product Overview Product Overview Package Contents Hardware Model Model/ Part Number Network Print Server AXIS 1650 0214-001- XX With firmware version 1.00 or higher Adhesive Holder & Clip ACC AXIS CLIPS K 20119 USB Cable 70 cm, 28 inches USB cable supports USB Low-Speed and Full-Speed. Hi-Speed is not supported. 20208 Power Adapter Model PS-H Part No.
Product Overview AXIS 1650 User’s Manual The AXIS 1650 Network Print Server Parallel printer port (LPT1) Test button Network indicator Ethernet connector Power adapter connector USB Printer Port (USB1) Power indicator Supported Printers AXIS 1650 is developed to network Canon printers and multifunctional products. AXIS 1650 supports host-based printing methods such as Canon Advanced Printing Technology, Canon Advanced Raster Printing System and other printer types such as Canon BubbleJet.
AXIS 1650 User’s Manual Product Overview Installation and Integration The installation of the AXIS 1650 and its integration into the network is performed using one of these software combinations: AXIS IP JumpStarter (for IP setting) and then AXIS CAPT Print Monitor (for printer installation) • Canon NetSpot Device Installer (for IP setting) and then AXIS CAPT Print Monitor (for printer installation) • AXIS IP JumpStarter and AXIS CAPT Print Monitor are available free of charge from the AXIS 1650 CD and on
Product Overview AXIS 1650 User’s Manual Future proof: You can upgrade the AXIS 1650 Flash memory over the network. This allows you to quickly update and enhance the operational features of your AXIS 1650 when new print server software becomes available. Printer Ports • One Low and -Full speed USB 1.1 port that also works with USB 2.0. Hi-Speed is not supported. • One high-speed IEEE 1284 compatible parallel port that plugs directly into the printer´s parallel port.
AXIS 1650 User’s Manual Section 2 Print Server Installation Print Server Installation Follow these steps to install and configure your AXIS 1650: 1. Connect the Hardware, on page 11 2. Set the IP Address, on page 13 3. Windows Installation, on page 22 1.
Print Server Installation AXIS 1650 User’s Manual 1. Make sure that your printer is switched off and that the print server’s power adapter is disconnected. 2. Locate the serial number, found on the underside label of the print server, and write it down. You will need this number to configure the print server. 3. Either connect the printer to the USB port using the USB cable, or connect the printer directly to the LPT port or use a printer cable.
AXIS 1650 User’s Manual Print Server Installation 2. Set the IP Address • • Before setting the IP address, make a note of the print server’s serial number (S/N), located on its backside label. See Backside label of print server, on page 11. You should obtain an unused IP address from your network administrator. Method Platform AXIS IP JumpStarter software Windows Comment Axis software that allows you to find print servers in your network and assign an IP address to them.
Print Server Installation AXIS 1650 User’s Manual Set a Static IP Address using AXIS IP JumpStarter AXIS IP JumpStarter is an application that helps you to locate your Axis print server on the network and assign an IP address to it. 1. Install AXIS IP JumpStarter, it is available on the AXIS 1650 CD and on www.axis.com 2. Select a print server from the serial number list. All AXIS 1650 appear with the default IP address 192.168.0.90.
AXIS 1650 User’s Manual Print Server Installation 4. Click the radio button that corresponds to your choice of IP setting method (static or dynamic using DHCP). When assigning a static IP address you also have to define the Subnet Mask and Default Gateway. 5. Click OK to save your settings. 6. You may be prompted to enter the server root password (by default set to ), click OK and the print server will appear in the list with the assigned IP address. 7.
Print Server Installation AXIS 1650 User’s Manual Set a Static IP Address using ARP in Windows 98/Me/2000/XP/2003 1. Open a Command Prompt and type: arp -s ping -l 479 Example: arp -s 192.168.3.191 00-40-8c-18-1c-f0 ping -l 479 192.168.3.191 2. If the host returns Reply from 192.168.3.191 ... or a similar message, the IP address has been set successfully. If the host returns Request time out...
AXIS 1650 User’s Manual Print Server Installation Set a Static IP Address using ARP in UNIX Follow the instructions below to set the IP address using ARP. 1. Type the following commands in the shell window: arp -s temp ping -s 479 Example: arp -s 192.168.3.191 00:40:8c:18:1c:f0 temp ping -s 479 192.168.3.191 2. The host will return 192.168.3.191 is alive or a similar message.
Print Server Installation AXIS 1650 User’s Manual Set an IP Address with NetSpot Device Installer software NetSpot Device Installer is software from Canon that allows you to assign an IP address and manage Canon devices connected to your network. NetSpot Device Installer software is supplied on CD-ROM with your Canon printer and on www.canon.com Depending on the provided CD-ROM, NetSpot Device Installer may not be included. If this is the case, please download NetSpot Device Installer from www.canon.
AXIS 1650 User’s Manual Print Server Installation Set the IP address using NetSpot Device Installer Follow these instructions to set the IP address using NetSpot Device Installer: 1. Start the program. The main window will open. After a while a list of devices detected on the network will be displayed. 2. Select the AXIS 1650 that displays the unit’s MAC address and default IP address 196.168.0.
Print Server Installation AXIS 1650 User’s Manual 5. Next, configure the TCP/IP protocol: Select Manual Setting Enter IP Address Enter Gateway Address Enter Subnet Mask The Broadcast Address is filled in automatically 6. After you have finished the configuration, click OK. If you get a message reading “Resetting device”, click OK. 7. Click OK. Your printer’s protocol configuration is now finished and your AXIS 1650 has received an IP address. Continue to Windows Installation, on page 22.
AXIS 1650 User’s Manual Print Server Installation IP Address Host Names If you are using host names, you can map a unique host name to the IP address. Refer to your system manuals or to your network administrator for instructions on how to perform name mapping on your system. Notes • • • • • • • • You need to know the Ethernet address of your AXIS 1650 to perform the installation. The Ethernet address is based on the serial number of your AXIS 1650.
Windows Installation Section 3 AXIS 1650 User’s Manual Windows Installation Installing Printer Ports using AXIS CAPT Print Monitor AXIS CAPT Print Monitor is a Windows component that has been developed for network printing. AXIS CAPT Print Monitor is the recommended tool for Canon printers, including CAPT, Canon Advanced Raster Printing System and BubbleJet.
AXIS 1650 User’s Manual Windows Installation Print Server Installation using AXIS CAPT Print Monitor in Windows 2000, XP and Server 2003 1. Install the AXIS CAPT Print Monitor on your workstation. The software is available on the AXIS 1650 CD and on www.axis.com 2. Launch the software installation and click Next. 3. Read the License Agreement and click Yes if you accept the terms.
Windows Installation AXIS 1650 User’s Manual 4. Leave this check-box unchecked* and click Next. * If you want to disable broadcast status updates and enable unicast, see Enabling Unicast Network Communication, on page 58 Windows XP/Server 2003 only: Make sure the Allow this application to process incoming network printer information on the local subnet checkbox is checked.
AXIS 1650 User’s Manual Windows Installation 5. Click Finish to finish the installation. 6. Windows XP/Server 2003: Go to Start | Printers and Faxes and click the Add a Printer icon to start the Add Printer Wizard. (Windows XP Home Edition: Start | Control Panel | Printers and Faxes | Add a Printer). Click Next. Windows 2000: Go to Start | Settings | Printers and click the Add Printer icon to start the Add Printer Wizard. Click Next.
Windows Installation AXIS 1650 User’s Manual 7. Select Local Printer attached to this computer. Make sure the Automatically detect and install my Plug and Play printer check box is not checked. Click Next. 8. Click the Create a new port radio-button and select AXIS CAPT Port*. Click Next. * AXIS CAPT Port is used for all Canon printers, including CAPT, Canon Advanced Raster Printing System and BubbleJet.
AXIS 1650 User’s Manual Windows Installation 9. The AXIS CAPT Port pop-up window will appear. Select your AXIS 1650 from the Available network printers list and click OK. If your AXIS 1650 doesn’t appear in the Available network printers list, enter its IP address and click Add. 10. Select Manufacturer and Printer from the driver list. Click Next. 11. Choose whether you want to keep the existing driver or to replace it.
Windows Installation AXIS 1650 User’s Manual 13. Choose whether you want to share the printer with other network users, print a test page, etc. Select the appropriate radio button and click Next and Finish. 14. Print a test page to verify. You have now completed the installation.
AXIS 1650 User’s Manual Windows Installation Print Server Installation using AXIS CAPT Print Monitor in Windows 98 and Me Follow the procedure below to install TCP/IP Ports from a Windows 98/Me workstation: 1. Install the AXIS CAPT Print Monitor on your workstation. The software is available on the AXIS 1650 CD and on www.axis.com 2. Launch the software installation and click Next. 3. Read the License Agreement and click Yes if you accept the terms.
Windows Installation AXIS 1650 User’s Manual 4. Leave this check-box unchecked* and click Next. (*If you want to disable broadcast status updates and enable unicast, See Enabling Unicast Network Communication on page 58 for instructions.) 5. Click Finish to finish the installation. 6. Select Settings |Printers from the Start menu and double-click the Add Printer icon to start the Add Printer Wizard. 7.
AXIS 1650 User’s Manual Windows Installation 8. Choose an appropriate printer driver for your printer. If the desired driver appears in the manufacturer and models list dialog, highlight your selection and click Next>. If the desired printer driver is not available, click the Have Disk... button. Insert the printer driver CD that was provided with your printer, select the CD drive and click OK. 9. Select the desired printer driver from the CD and click Next> 10.
Windows Installation AXIS 1650 User’s Manual Print Server Installation using the Standard TCP/IP Port in Windows 2000/XP/2003 Follow the instructions below to use the Windows Standard TCP/IP Port to add a network printer in Windows 2000/ Windows XP/2003. Windows XP/ Server 2003: 1. Go to Start | (Settings) | Printers and Faxes and click the Add a Printer icon to start the Add Printer Wizard. Click Next. Windows 2000: 1.
AXIS 1650 User’s Manual Windows Installation 4. In the Printer Name or IP Address field, enter the IP address of the print server (Example: 192.168.3.191) The Port Name field will be filled in automatically. Click Next. 5. Select Manufacturer and Printer from the lists. Click Next. 6. If you already have the printer’s driver installed, you will be asked whether to keep it or to replace it. Click Next. Supply a name for the printer and choose whether you want to make it your default printer. Click Next.
Windows Installation AXIS 1650 User’s Manual 8. Next, from your desktop, go to Start | Printers (and Faxes). Highlight the installed printer and right-click, choose Properties, then Ports | Configure Port. 9. In the LPR Settings - Queue Name field, you will see the value "z". In the Queue Name field, type USB1 or LPT1, depending on which printer port you are using. Click OK and then Apply. 10. Print a test page to verify. You have now finished the installation.
AXIS 1650 User’s Manual Section 4 Print Server Management and Configuration Print Server Management and Configuration The management and configuration tools that are supported by the AXIS 1650 allow you to: • • • • Change print server parameters Receive extended information about print jobs Receive printer port status and monitor printers Reset the AXIS 1650 Configuration Overview The method you should use to manage and configure your AXIS 1650 is dictated by your TCP/IP network.
Print Server Management and Configuration AXIS 1650 User’s Manual Print Server Management from the Embedded Web Pages All Axis print servers contain an embedded web server that can be accessed through a web browser. The embedded web server provides access to configuration and management pages for the print server and the connected printer, allowing you to perform e.g. these operations: Once you have established the AXIS 1650 in the TCP/IP environment, as described in 2.
AXIS 1650 User’s Manual Print Server Management and Configuration Accessing the Embedded Web Pages Follow these steps to access the AXIS 1650 embedded web pages: 1. Enter the print server’s IP address (or host name) in the Location/Address field of your Web browser. Press Enter 2. The Printer Overview page will appear. Click the Admin button to access the Administration web pages. 3. You may be prompted for a password; enter the default user name root and leave the password field empty. Click OK.
Print Server Management and Configuration AXIS 1650 User’s Manual Available Services from the User Mode The following services are available from the User mode. A link to www.axis.com is available from this mode. Most settings displayed in the User mode are modified from the Admin mode! Printer Overview The Printer Overview page contains a section that allows you to view the general parameter setting of the AXIS 1650 and the connected printer.
AXIS 1650 User’s Manual Print Server Management and Configuration Serial Number Every Axis device is uniquely identified by its serial number. The serial number is found on the under side label of your print server. Language English and Japanese is supported in the print server's web interface. Change the language by clicking the Change button. Printer Status This page displays the status and capabilities of the printer that is connected to the printer port.
Print Server Management and Configuration AXIS 1650 User’s Manual Help The Help pages present basic information about the AXIS 1650 and the Web user interface. Available Services from the Admin Mode The following services are available from the Admin mode. An additional link to www.axis.com is available from this mode.
AXIS 1650 User’s Manual Print Server Management and Configuration System Location This parameter allows you to specify where the network printer is physically located in your organization. This enables you to find the printer to which you have sent your print jobs. Default = System Contact: Enter the name of e.g. the System Manager. Default = System Contact Phone Nbr.: Enter the telephone number of e.g. the System Manager.
Print Server Management and Configuration AXIS 1650 User’s Manual Community Name: Specify the community name for SNMP. Up to 32 alphanumeric characters can be entered. Default = public Restrictions TCP Restriction Enabled Users specified in the IP Address List are rejected or accepted, depending on TCP Restriction Mode, to send printjobs over the print server.
AXIS 1650 User’s Manual Print Server Management and Configuration SNMP Restriction Mode: Accept Only users specified in [SNMP restriction IP address list] are permitted to specify/browse the settings for the device using the SNMP protocol. • Reject Only users specified in [SNMP restriction IP address list] are rejected from specifying/browsing the settings for the device using the SNMP protocol. Default = Accept • SNMP Restriction IP Address List: Users specified here are rejected or accepted.
Print Server Management and Configuration AXIS 1650 User’s Manual Serial Number Every Axis device is uniquely identified by its serial number. The serial number is found on the under side label of your print server. See Print Server Installation, on page 11. Parameter List Displays a list of all parameters and their current settings. Restart Restarts the print server.
AXIS 1650 User’s Manual Print Server Management and Configuration Print Jobs From the Print Jobs page you can view Printer Usage that displays the accumulated usage of the printer connected to your print server. You can also view a log of the 32 latest print jobs that includes the user name, the document name, number of pages and the time when the document was printed. Network Settings From the Network Settings page you can set all parameters that control the network traffic to and from the AXIS 1650.
Print Server Management and Configuration AXIS 1650 User’s Manual DHCP Enabled Select the appropriate radio button to enable DHCP (Dynamic Host Configuration Protocol). DHCP automatically downloads the IP address to each print server at startup. Depending on how your network has been configured, other Internet-related parameters such as the default router, subnet mask, etc. might also be set automatically.
AXIS 1650 User’s Manual Print Server Management and Configuration Subnet Mask Specify the subnet mask used for determining when the traffic should be sent via a router. This number combined with the IP address identifies on which network the print server is located. The normal class C subnet mask value is usually 255.255.255.0. Default value: 0.0.0.0, indicates that all network segments are accessible. Default Router Specify the IP address for the default router.
Print Server Management and Configuration AXIS 1650 User’s Manual WINS Enabled Select the appropriate radio button to enable WINS (Windows Internet Name Service) over TCP/IP. WINS uses NetBIOS names to allow Windows-based clients to locate resources on TCP/IP networks. Default value = Yes WINS Server Address Specify the IP address of the primary WINS server. The WINS server is used for identifying computers with host names instead of IP addresses. Default value =0.0.0.
AXIS 1650 User’s Manual Print Server Management and Configuration SNTP update interval SNTP update interval: The interval the print server shall send a request to the Time Server for a updated time. Default = 1hours Time Zone (Only visible in English firmware version) Specify the time zone for your print server location. Default = GMT Daylight Saving (Only visible in English firmware version) Select Yes if you have Daylight saving.
Print Server Management and Configuration AXIS 1650 User’s Manual AXIS Online Services Click the print server product page to receive information about your print server model. The product page, available on the Axis Web Site, offers you up-to-date information, print server manuals, FAQs, software updates and technical support, etc. Contact Information If you need to contact any Axis distributor or local office, please click the Axis distributor or office link.
AXIS 1650 User’s Manual Print Server Management and Configuration Print Server Management Using FTP Having assigned an IP address to your AXIS 1650, as described in 2. Set the IP Address, on page 13, you can change the AXIS 1650 parameter settings using the File Transport Protocol (FTP). Editing the config file Follow the instructions below to edit the config file using FTP: 1. Log in to the AXIS 1650 by typing: ftp or ftp in a Command prompt. 2.
Print Server Management and Configuration AXIS 1650 User’s Manual Example: How to edit the config file using FTP from a Command prompt. > ftp npserver connected to npserver. 220 AXIS 1650 FTP Print Server v1. Nov 1 2004 ready. Name (npserver:thomas): root 331 User name ok. 230 User logged in ftp> get config 200 PORT command successful. 150 Opening data connection for config (192,36,253,4,13,223), (mode ascii). 226 Transfer complete. 8588 bytes received in 0.24 seconds (35.
AXIS 1650 User’s Manual Print Server Management and Configuration Print Server Management Using SNMP You can use SNMP (Simple Network Management Protocol) for remotely monitoring and configuring the AXIS 1650. All major functions for print servers are supported. General Information SNMP refers to a set of standards for network management, including a protocol, a database structure specification, and a set of data objects. The AXIS 1650 SNMP implementation runs in TCP/IP networks.
The Test Button Section 5 AXIS 1650 User’s Manual The Test Button The test button is located on the front right hand side of the print server and is used to perform a Factory Default: 1. Remove the external power supply to switch off the print server. 2. Press and hold down the test button, while you reconnect the external power supply. 3. Continue to hold down the test button until the network indicator remains constantly lit. This should take about 20 seconds. 4.
AXIS 1650 User’s Manual Section 6 Upgrading the Firmware Upgrading the Firmware The print server’s firmware* is stored in its Flash memory. This memory retains data content even after the power is removed. Flash memory allows data to be erased and re-written, which is why you can install firmware updates in your print server as they become available, without having to replace any parts. New firmware can simply be loaded into the AXIS 1650 over the network.
Upgrading the Firmware AXIS 1650 User’s Manual Upgrading using FTP • To upgrade over the network using FTP you will need a file with the new print server firmware. The name of this file is in the form product_version.bin. • The print server must have a valid IP address. This example uses these sample values: • Print server model: AXIS 1650 • IP address of print server: 10.13.4.105 • New firmware version name: 1650_1_00.
AXIS 1650 User’s Manual Upgrading the Firmware 13. When you see a new ftp prompt the procedure has successfully been completed. Notes: • • • If the upgrading process fails, just repeat the instructions presented above. If you lose contact with the AXIS 1650 after an upgrading failure, just restart the AXIS 1650 to restore contact. If the network LED flashes at regular half second intervals, the AXIS 1650 cannot process any print jobs. In order to leave this state, you must repeat the instructions above.
AXIS 1650 User’s Manual Appendix A Enabling Unicast Network Communication IMPORTANT! All network configuration must be performed by the network administrator! AXIS 1610 and AXIS 1611 do not support the Unicast mode. AXIS CAPT Print Monitor uses broadcast communication, so that status information from the print server can be shared between several users without elevating network traffic. Broadcast communication is used by default in the print server.
AXIS 1650 User’s Manual 6. Open the config file using any text editor: Make sure this parameter is set to YES. 7. Locate the parameter named USE_IP_PORT_NAME: type YES 8. Once the editing is complete, save the file as config 9. In the Command prompt window, upload the configuration file to the AXIS 1650 by typing put config CONFIG 10. To exit FTP, type quit Note: This will also change the Print Server Name parameter so that it is based on the print server’s IP address, with “_” replacing the “.
AXIS 1650 User’s Manual It is important that the destination file is specified in capital letters. Otherwise the edits are temporary and will be lost once the AXIS 1650 has been rebooted. 11. Install AXIS CAPT Print Monitor software on your workstation. The software is available on the AXIS 1650 CD and on www.axis.com. Click your way through the program. 12. During the software setup, you will reach the Set the Unicast Communication Mode screen, check the Enable unicast check-box. 13.
AXIS 1650 User’s Manual 16. Click the Create a new port radio-button and select AXIS CAPT Port. Click Next. 17. A pop-up window will appear. Enter the IP address of the AXIS 1650. 18. Select Manufacturer and Printer from the driver list. Click Next. 19. Choose whether you want to keep the existing driver or to replace it. If you already have the printer’s driver installed, you will be asked whether to keep it or to replace it. 20. Click Next.
AXIS 1650 User’s Manual Appendix B Internet Connection Firewall in Windows XP SP2 If you have upgraded to Windows XP SP2, you need to open UDP port 10260 in the Internet Connection Firewall when using Broadcast communication. For Unicast comunication, the firewall can remain closed. UDP port 10260 is opened automatically in Internet Connection Firewall, if allowed during the installation of AXIS CAPT Print Monitor in Windows XP/2003, see Windows Installation, on page 22.
AXIS 1650 User’s Manual 3. Make sure On is selected. “Don’t allow exceptions” and “Off” must be unchecked! 4. Click Exceptions and highlight AXIS CAPT Port. 5. Click OK.
AXIS 1650 User’s Manual Note: If you accidentally delete the AXIS CAPT Port and want to recreate it, go to Exceptions | Add Port and configure the port.
AXIS 1650 User’s Manual Technical Specifications Supported Printers AXIS 1650 is developed to network Canon printers and multifunctional products. AXIS 1650 supports host-based printing methods such as Canon Advanced Printing Technology, Canon Advanced Raster Printing System and other printer types such as Canon BubbleJet. IMPORTANT: Printers from other manufacturers than Canon are not supported. Supported Systems Microsoft Windows: Windows 98, Windows 2000, Windows Me, Windows XP, Windows Server 2003.
AXIS 1650 User’s Manual Supported Languages English and Japanese. Logical Connection Supports NWay that provides auto-detection of network speed. Use Ethernet II frame type, full duplex. Wired Network Attachments RJ-45 connector (Category 5 shielded twisted pair cable) for 10baseT Ethernet or 100base TX Fast Ethernet. Printer Ports • • One Low and -Full speed USB 1.1 port, and works with USB v 2.0 (Low-Speed and Full-Speed). The USB cable shipped with the product supports Low-Speed and Full-Speed.
AXIS 1650 User’s Manual Environmental Temperature: 40 - 105 °F (5 - 40 °C) Approvals EMC: EN 55 024:1998 EN 55 022:1998 + A1 (CISPR 22:1997 + A1) Class B EN 61000-3-2:2000 EN 61000-3-3:1995+A1 VCCI:2002 Class B ITE (CISPR 22:1997 + A1:2000, Class B C-tick AS/NZS 3548 FCC part 15, subpart B, Class B, demonstrated by compliance with EN 55022:1998 (CISPR 22:1997) Class B. Safety EN 60950, approved power supplies for all countries.
AXIS 1650 User’s Manual Index A Adhesive Clip 12 Adhesive Holder 12 Admin 36 Assistance 6 B BOOTP 44 Broadcast 62 BSD 17 BubbleJet 54 C Canon Advanced Printing Technology 1, 8, 38, 45, 65 Canon Advanced Raster Printing System 1, 8, 38, 65 Canon BubbleJet 1, 8, 65 Configuration methods FTP 51 SNMP 53 Web browser 37 Configure Port 34 D Daylight Saving 49 default IP address 192.168.0.
AXIS 1650 User’s Manual I IEEE 1284 parallel port 10, 66 Installing printer Ports Windows 2000 23, 29 Installing printer ports Windows 2000,XP, 2003 23 Windows 98, Me 29 Internet Connection Firewall 62 IP Address Automatic Assignment Methods 21 Manual Assignment Methods 21 Setting, using ARP 16, 17 Setting, using AXIS IP JumpStarter 14 L Label, backside 11 Language 41 License Agreement 23 Local Printer 30 LPR Settings 34 N Network Settings 45 P Parameter List 44 password 37 peer-to-peer printing 22 Print J
AXIS 1650 User’s Manual R Remote Printer Port 31 Restart 44 Root Password 41 S Serial Number 39, 44 Setting the Internet address ARP 17 SLP enabled 48 SLP restriction enabled 42 SLP restriction IP address list 43 SLP restriction mode 43 SNMP 53 SNMP access enabled 41 SNMP restriction enabled 42 SNMP restriction IP address list 43 SNMP restriction mode 43 SNTP Server Address 48 SNTP update interval 49 Software Default 44 Support 6, 49 Supported Printers 65 Supported printers 8 System Comment 41 System C
AXIS 1650 User’s Manual TCP restriction mode 42 Technical Assistance 6 Test Button 54 Test Page 54 TFTP 44 This Print Server 40 Time Zone 49 two connected printers 10 U UDP port 10260 62 UNIX 17 User 36, 37 W Installing printer ports 23, 29, 61 Windows XP 23 WINS 21 Z z 34 71