EOS 80D (W) Instruction Manual Instruction manuals (PDF files) and software can be downloaded from the Canon website (p.4, 513). www.canon.
Introduction The EOS 80D (W) is a digital single-lens reflex camera featuring a finedetail CMOS sensor with approx. 24.2 effective megapixels, DIGIC 6, high-precision and high-speed 45-point AF (Cross-type AF point: Max. 45 points), max. approx. 7.0 fps continuous shooting, Live View shooting, Full High-Definition (Full HD) movie shooting, and wireless functions (Wi-Fi/NFC).
Item Check List Before starting, check that all the following items are included with your camera. If anything is missing, contact your dealer. Camera (with body cap) Wide Strap Battery Pack LP-E6N (with protective cover) Battery Charger LC-E6/LC-E6E* * Battery Charger LC-E6 or LC-E6E is provided. (The LC-E6E comes with a power cord.) The camera does not come with an interface cable or HDMI cable. The Instruction Manuals provided are listed on the next page.
Instruction Manuals Camera and Wireless Function Basic Instruction Manual The booklet is the Basic Instruction Manual. More detailed Instruction Manuals (PDF files) can be downloaded from the Canon website. Downloading and Viewing the Instruction Manuals (PDF Files) 1 Download the Instruction Manuals (PDF files). Connect to the Internet and access the following Canon website. www.canon.com/icpd Select your country or region of residence and download the Instruction Manuals.
Compatible Cards The following cards can be used with the camera regardless of capacity: If the card is new or was previously formatted by another camera or computer, format the card with this camera (p.64). SD/SDHC*/SDXC* memory cards * UHS-I cards supported. Cards that Can Record Movies When shooting movies, use a large-capacity card with a reading/writing speed class at least as high as shown in the following table. Movie Recording Size (p.
Quick Start Guide Insert the battery (p.36). 1 To charge the battery, see page 34. Insert the card (p.37). 2 3 With the card’s label facing toward the back of the camera, insert it into the card slot. White index Red index Attach the lens (p.47). Align the lens’s white or red mount index with the camera’s mount index of the same color. 4 Set the lens’s focus mode switch to (p.47). 5 Set the power switch to <1>, then set the Mode Dial to (Scene Intelligent Auto) (p.78).
Quick Start Guide 6 Flip out the LCD monitor (p.40). 7 Focus on the subject (p.50). 8 Take the picture (p.50). 9 Review the picture. When the LCD monitor displays the date/time/zone setting screens, see page 43. Look through the viewfinder and aim the viewfinder center over the subject. Press the shutter button halfway, and the camera will focus on the subject. If necessary, the built-in flash will be raised. Press the shutter button completely to take the picture.
Conventions Used in this Manual Icons in this Manual <6> : Indicates the Main Dial. <5> : Indicates the Quick Control Dial. <9> : Indicates the Multi-controller and the push direction. <0> : Indicates the Setting button. 0, 9, 7, 8 : Indicates that each function remains active for approx. 4 sec., 6 sec., 10 sec., or 16 sec. after you let go of the button.
Chapters Introduction 1 2 3 4 5 6 7 8 9 10 11 12 13 14 2 Getting Started 33 Basic Shooting 77 Setting the AF and Drive Modes 115 Image Settings 141 Advanced Operations 189 Flash Photography 227 Shooting with the LCD Monitor (Live View Shooting) 255 Shooting Movies 293 Image Playback 345 Post-Processing Images 389 Sensor Cleaning 403 Customizing the Camera 409 Reference 449 Software Start Guide / Downloading Images to a Computer 511 9
Contents Introduction 2 Item Check List................................................................................. 3 Instruction Manuals .......................................................................... 4 Compatible Cards............................................................................. 5 Quick Start Guide ............................................................................. 6 Conventions Used in this Manual..................................................... 8 Chapters.
Contents Turning the LCD Monitor Off/On ..................................................67 Reverting the Camera to the Default Settings.............................. 68 Displaying the Grid.......................................................................... 71 Q Displaying the Electronic Level ...............................................72 Displaying the Flicker Detection......................................................74 Feature Guide and Help................................................
Contents 3 Setting the AF and Drive Modes 115 f: Selecting the AF Operation....................................................116 S Selecting the AF Area and AF Point ...................................... 120 AF Area Selection Modes............................................................. 124 AF Sensor .................................................................................... 127 Lenses and Usable AF Points ...................................................... 128 When Autofocus Fails .
Contents File Numbering Methods...............................................................184 Setting Copyright Information .......................................................186 5 Advanced Operations 189 d: Program AE.............................................................................190 s: Shutter-Priority AE ................................................................ 192 f: Aperture-Priority AE..............................................................
Contents Menu Function Settings................................................................ 270 Selecting the AF Operation .......................................................... 274 Focusing with AF (AF Method)..................................................... 276 x Shooting with the Touch Shutter............................................. 286 MF: Focusing Manually ................................................................ 288 8 Shooting Movies 293 k Shooting Movies..................
Contents Viewing Images on a TV Set......................................................... 373 K Protecting Images ................................................................... 376 L Erasing Images ........................................................................ 378 W Digital Print Order Format (DPOF)..........................................380 p Specifying Images for a Photobook..........................................384 Changing Image Playback Settings .................................
Contents 13 Reference 449 B Button Functions ................................................................ 450 Checking the Battery Information ................................................. 452 Using a Household Power Outlet ................................................. 456 H Using Eye-Fi Cards................................................................. 457 Function Availability Table by Shooting Mode .............................. 460 System Map .........................................
Index to Features Power LCD Monitor Charging the battery p.34 Brightness adjustment p.386 Battery level p.42 Touch screen p.61 Checking battery information Electronic level p.72 p.452 Feature guide p.75 Help p.76 Household power outlet p.456 Auto power off p.66 Cards Formatting AF AF operation p.64 Release shutter without card p.38 Lens p.116 AF area selection mode p.120 AF point selection p.122 Lens group p.
Index to Features Image Quality Exposure Image-recording quality p.142 Exposure compensation p.200 ISO speed p.148 Picture Style p.154 Exposure compensation with M+ISO Auto p.197 White balance p.162 AEB p.201 Auto Lighting Optimizer p.169 AE lock p.203 Noise reduction for high ISO speeds Safety shift p.415 p.170 Noise reduction for long exposures p.172 Highlight tone priority Lens aberration correction p.174 p.175 Reducing flicker p.
Index to Features Creative filters for movies p.316 Video snapshot p.333 Resizing JPEGs p.395 Time-lapse movie p.319 Cropping JPEGs p.397 Movie Servo AF speed p.329 Creative filters p.399 Image Editing Movie Servo AF tracking sensitivity p.330 Remote control shooting p.332 Playback Image review time p.67 Single-image display p.346 Shooting information display p.348 Index display p.353 RAW image processing p.
Safety Precautions The following precautions are provided to prevent harm or injury to yourself and others. Make sure to thoroughly understand and follow these precautions before using the product. If you experience any malfunctions, problems, or damage to the product, contact the nearest Canon Service Center or the dealer from whom you purchased the product. Warnings: Follow the warnings below. Otherwise, death or serious injuries may result.
Safety Precautions When the camera or accessories are not in use, make sure to remove the battery, and disconnect the power plug and connecting cables from the equipment before storing. This is to prevent electrical shock, excessive heat, fire, and corrosion. Do not use the equipment where there is flammable gas. This is to prevent an explosion or a fire. If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the exposed parts.
Safety Precautions Cautions: Follow the cautions below. Otherwise, physical injury or property damage may result. Do not use or store the product in a high-temperature location such as inside a car under the hot sun. The product may become hot and cause burns. Doing so may also cause battery leakage or explosion, which will degrade the performance or shorten the life of the product. Do not carry the camera around when it is attached to a tripod. Doing so may cause an injury or an accident.
Handling Precautions Camera Care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult the nearest Canon Service Center. Wipe off any water droplets with a dry and clean cloth. If the camera has been exposed to salty air, wipe it with a clean, well-wrung wet cloth.
Handling Precautions If condensation forms on the camera, do not use the camera. This is to avoid damaging the camera. If there is condensation, remove the lens, card and battery from the camera, and wait until condensation has evaporated before using the camera. If the camera will not be used for an extended period, remove the battery and store the camera in a cool, dry, well-ventilated location.
Handling Precautions Cards To protect the card and its recorded data, note the following: Do not drop, bend, or wet the card. Do not subject it to excessive force, physical shock, or vibration. Do not touch the card’s electronic contacts with your fingers or anything metallic. Do not affix any stickers, etc., on the card. Do not store or use the card near anything that has a strong magnetic field, such as a TV set, speakers, or magnets. Also avoid places prone to having static electricity.
Nomenclature Drive mode selection button (p.138) LCD panel (p.28) AF operation selection button (p.116) ISO speed setting button (p.148) Built-in flash/AF-assist beam emitter (p.228/119) Metering mode selection button (p.198) EF lens mount index (p.47) AF area selection mode button (p.121) EF-S lens mount index (p.47) Flash sync contacts Hot shoe (p.233) <6> Main Dial (p.51) Flash button (p.228) Mode Dial lockrelease button (p.51) LCD panel illumination button (p.
Nomenclature
AF start button (p.50, 116, 257, 303) Focal plane mark (p.97) Live View shooting/ Movie shooting switch (p.256/294) <0> Start/Stop button (p.256, 294) AE lock/FE lock button/ Index/Reduce button (p.203, 232/353, 355) Dioptric adjustment knob (p.49) Speaker (p.365) Eyecup (p.220) AF point selection/ Magnify button (p.122/355) Viewfinder eyepiece Power switch (p.41) Access lamp (p.39) Strap mount (p.33) Menu button (p.58) Info button (p.
Nomenclature LCD Panel Drive mode (p.138) u Single shooting o High-speed continuous shooting i Low-speed continuous shooting B Silent single shooting M Silent continuous shooting Q Self-timer: 10 sec./remote control k Self-timer: 2 sec./remote control Highlight tone priority (p.174) ISO speed (p.148) ISO speed (p.148) Possible shots Self-timer countdown Bulb exposure time Error number/Error code (Err) Remaining images to record Time-lapse movie shooting (p.319) Metering mode (p.
Nomenclature Viewfinder Information Single-point AF (Manual selection) (p.120) Focusing screen Area AF frame (p.120) Zone AF (Manual selection of zone) (p.120) Large Zone AF (Manual selection of zone) (p.120) 45-point automatic selection AF (p.120) AF point (p.120) Grid (p.71) Aspect ratio line (p.146) Spot metering circle (p.198) Flicker detection (p.74, 179) Electronic level (p.73) Battery level (p.42) Warning symbol (p.425) ISO speed (p.148) Focus indicator (p.78) AE lock (p.
Nomenclature Mode Dial Turn the Mode Dial while holding down the Mode Dial center (Mode Dial lock-release button). Basic Zone All you do is press the shutter button. The camera sets everything to suit the subject or scene for shooting. A 7 C 8 P : Scene Intelligent Auto (p.78) : Flash Off (p.83) : Creative Auto (p.84) : Special scene (p.88) Food (p.89) G HDR Backlight Control (p.94) C Kids (p.90) 2 Portrait (p.95) x Candlelight (p.91) 3 Landscape (p.96) 6 Night Portrait (p.92) 4 Close-up (p.
Nomenclature Creative Zone These modes give you more control for shooting various subjects as desired. d : Program AE (p.190) s : Shutter-priority AE (p.192) f : Aperture-priority AE (p.194) a : Manual exposure (p.196) F : Bulb (p.204) Custom shooting mode You can register the shooting mode (d/s/f/a/F), AF operation, menu settings, etc., to w, x Mode Dial positions (p.445).
Nomenclature Battery Charger LC-E6 Charger for Battery Pack LP-E6N/LP-E6 (p.34). Power plug Battery pack slot Charge lamp IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed. Battery Charger LC-E6E Charger for Battery Pack LP-E6N/LP-E6 (p.34).
1 Getting Started This chapter explains preparatory steps before you start shooting and basic camera operations. Attaching the Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle. The eyepiece cover is attached to the strap (p.220).
Charging the Battery 1 Remove the protective cover. Detach the protective cover provided with the battery. the battery. 2 Attach As shown in the illustration, attach the battery securely to the charger. To detach the battery, follow the above procedure in reverse. LC-E6 the battery. 3 Recharge For LC-E6 As shown by the arrow, flip out the battery charger’s prongs and insert the prongs into a power outlet.
Charging the Battery Tips for Using the Battery and Charger Upon purchase, the battery is not fully charged. Charge the battery before use. Recharge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually drain and lose its capacity. After recharging the battery, detach it and disconnect the charger from the power outlet. You can attach the cover in a different orientation to indicate whether the battery has been recharged or not.
Installing and Removing the Battery Load a fully-charged Battery Pack LP-E6N (or LP-E6) into the camera. The camera’s viewfinder becomes bright when a battery is installed, and darkens when the battery is removed. If the battery is not installed, the picture in the viewfinder becomes blurred and focus cannot be achieved. Installing the Battery 1 Open the cover. Slide the lever as shown by the arrows and open the cover. the battery. 2 Insert Insert the end with the electrical contacts.
Installing and Removing the Card You can use an SD, SDHC, or SDXC memory card (sold separately) with the camera. SDHC and SDXC memory cards with UHS-I can also be used. The captured images are recorded onto the card. Make sure the card’s write-protect switch is set upward to enable writing and erasing. Installing the Card 1 Write-protect switch Open the cover. Slide the cover as shown by the arrows to open it. the card.
Installing and Removing the Card The number of possible shots depends on the remaining capacity of the card, image-recording quality, ISO speed, etc. Setting [z1: Release shutter without card] to [Disable] will prevent you from shooting without a card inserted (p.470). Removing the Card Access lamp 1 Open the cover. Set the power switch to <2>. Make sure the access lamp is off, then open the cover. If [Recording...] is displayed, close the cover. the card.
Installing and Removing the Card When the access lamp is lit or blinking, it indicates that images are being written to, read from, or erased from the card, or data is being transferred. Do not open the card slot cover during this time. Also, never do any of the following while the access lamp is lit or blinking. Otherwise, it can damage the image data, card, or camera. • Removing the card. • Removing the battery. • Shaking or banging the camera around.
Using the LCD Monitor After you flip out the LCD monitor, you can set menu functions, use Live View shooting, shoot movies, or play back images and movies. You can change the direction and angle of the LCD monitor. 1 Flip out the LCD monitor. the LCD monitor. 2 Rotate When the LCD monitor is swung out, 180° 90° 175° you can rotate it up, down, or over 180° to face the subject. The indicated angle is only approximate. it toward you. 3 Face Normally, use the camera with the LCD monitor facing you.
Turning on the Power If you turn on the power switch and the date/time/zone setting screen appears, see page 43 to set the date/time/zone. <1> : The camera turns on. <2> : The camera is turned off and does not function. Set to this position when not using the camera. Automatic Sensor Cleaning Whenever you set the power switch to <1> or <2>, sensor cleaning will be performed automatically. (A small sound may be heard.) During the sensor cleaning, the LCD monitor will display .
Turning on the Power z Battery Level Indicator When the power switch is set to <1>, the battery level will be indicated in one of six levels. A blinking battery icon (b) indicates that the battery will be exhausted soon. Display z x c m Level (%) 100 - 70 69 - 50 49 - 20 19 - 10 Number of Possible Shots bn 9-1 0 (Approx.
3 Setting the Date, Time, and Zone When you turn on the power for the first time or if the date/time/zone have been reset, the date/time/zone setting screen will appear. Follow the steps below to set the time zone first. Set the camera to the time zone in which you currently live so that, when you travel, you can simply change the setting to the correct time zone for your destination, and the camera will automatically adjust the date/time.
3 Setting the Date, Time, and Zone Select the [Zone] box, then press <0>. Press the keys to select the time zone, then press <0>. If you do not see your time zone, you can also set the time difference with UTC directly. In such a case, press the keys to select the [Time difference] box, then press <0> so is displayed. Press the keys to set, then press <0>. (Returns to .) After setting, press the keys to select [OK], then press <0>.
3 Setting the Date, Time, and Zone the setting. 6 Exit Press the keys to select [OK], then press <0>. The date/time/zone and daylight saving time will be set and the menu will reappear. The date/time/zone settings may be reset in the following cases. If this happens, set the date/time/zone again. • When the camera is stored without the battery. • When the camera’s battery becomes exhausted. • When the camera is exposed to below freezing temperatures for a prolonged period.
3 Selecting the Interface Language 1 Display the menu screen. Press the button to display the menu screen. the [52] tab, select 2 Under [LanguageK]. Press the button and select the [5] tab. Press the keys to select the [52] tab. Press the keys to select the [LanguageK], then press <0>. the desired language. 3 Set Press the keys to select the language, then press <0>. The interface language will change.
Attaching and Detaching a Lens The camera is compatible with all Canon EF and EF-S lenses. The camera cannot be used with EF-M lenses. Attaching a Lens 1 Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows. the lens. 2 Attach Align the lens’s red or white index White index with the camera’s index matching the same color. Turn the lens as shown by the arrow until it clicks in place. Red index the lens’s focus mode switch 3 Set to .
Attaching and Detaching a Lens Zooming Turn the zoom ring on the lens with your fingers. If you want to zoom, do it before focusing. Turning the zoom ring after achieving focus may throw off the focus. Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrow. Turn the lens until it stops, then detach it. Attach the rear lens cap to the detached lens. Do not look at the sun directly through any lens. Doing so may cause loss of vision.
Basic Operation Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. Turn the knob left or right so that the AF points in the viewfinder look the sharpest. If the knob is difficult to turn, remove the eyecup (p.220). If the camera dioptric adjustment still cannot provide a sharp viewfinder image, using E-series Dioptric Adjustment Lenses (sold separately) is recommended. Holding the Camera To obtain sharp images, hold the camera still to minimize camera shake.
Basic Operation Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing Halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed in the viewfinder and on the LCD panel (0). Pressing Completely This releases the shutter and takes the picture.
Basic Operation Mode Dial Turn the dial while holding down the lock release button at the center of the dial. Use it to set the shooting mode. 6 Main Dial (1) After pressing a button, turn the <6> dial. When you press a button such as , the respective function remains selected for the duration of the timer (9). During this time, you can turn the <6> dial to set the desired setting.
Basic Operation 5 Quick Control Dial (1) After pressing a button, turn the <5> dial. When you press a button such as , the respective function remains selected for the duration of the timer (9). During this time, you can turn the <5> dial to set the desired setting. When the function selection ends or if you press the shutter button halfway, the camera will be ready to shoot. Use this dial to select or set the AF operation, drive mode, ISO speed, metering mode, AF point selection, etc.
Basic Operation 9 Multi-controller The Multi-controller <9> has eight keys that tilt in the directions shown by the arrows. Use the eight keys to select the AF point, correct the white balance, move the AF point or magnifying frame during Live View shooting or movie shooting, or scroll around magnified images during playback. For menus and the Quick Control, the Multi-controller works only in the vertical and horizontal directions . It does not work in diagonal directions.
Basic Operation R Multi Function Lock With [54: Multi function lock] set and the switch set upward, the camera prevents you from changing settings inadvertently by moving the Main Dial, Quick Control Dial, and Multi-controller or by touching the touch panel. switch set downward: Lock released switch set upward: Lock engaged 1 Select [Multi function lock]. Under the [54] tab, select [Multi function lock], then press <0>. a checkmark [X] to the 2 Add camera control to be locked.
Basic Operation U LCD Panel Illumination You can illuminate the LCD panel by pressing the button. Turn on (9) or off the LCD panel illumination by pressing the button. During a bulb exposure, pressing the shutter button completely will turn off the LCD panel illumination. Displaying Shooting Function Settings After you press the button a number of times, the shooting function settings will be displayed.
Q Quick Control for Shooting Functions You can directly select and set the shooting functions displayed on the LCD monitor. This is called Quick Control. 1 Press the button (7). The Quick Control screen will appear. the desired function. 2 Set Press the or keys to select a function. The settings of the selected function and Feature guide (p.75) will appear. Turn the <6> or <5> dial to change the setting. Basic Zone modes Creative Zone modes the picture.
Q Quick Control for Shooting Functions Sample Quick Control Screen Aperture (p.194) Shutter speed (p.192) Shooting mode*1 (p.30) Exposure compensation/ AEB setting (p.200/201) Flash exposure compensation (p.230) AE lock*2 (p.203) Highlight tone priority*2 (p.174) ISO speed (p.148) Wi-Fi function*3 Picture Style (p.154) Custom Controls (p.433) AF operation (p.116) Image-recording quality (p.142) Return White balance (p.162) AF area selection mode (p.121) White balance correction (p.
3 Menu Operations You can set various settings with the menus such as the imagerecording quality, date and time, etc. button button <0> button LCD monitor keys Menus in Basic Zone Modes * Some menu tabs and menu items are not displayed in Basic Zone modes.
3 Menu Operations Menu Setting Procedure 1 Display the menu screen. Press the button to display the menu screen. a tab. 2 Select Each time you press the button, the main tab (group of functions) will switch. Press the keys to select a secondary tab. For example, in this manual, the [z3] tab refers to the screen displayed when the z (Shooting) tab’s [3] is selected. the desired item. 3 Select Press the keys to select the item, then press <0>. the setting.
3 Menu Operations In step 2, you can also turn the <6> dial to select a menu tab. In step 4, you can also turn the <5> dial to select certain settings. In steps 2 to 5, you can also use the LCD monitor’s touch screen (p.61). The explanation of menu functions hereafter assumes that you have pressed the button to display the menu screen. To cancel the operation, press the button. For details about each menu item, see page 470.
d Using the Touch Screen The LCD monitor is a touch-sensitive panel that you can operate with your fingers. Tap Sample Display (Quick Control) Use your finger to tap on (touch briefly and then remove your finger from) the LCD monitor. By tapping, you can select menus, icons, etc., displayed on the LCD monitor. When touch-screen operation is possible, a frame will appear around the icon (except on menu screens). For example, when you tap on [Q], the Quick Control screen appears.
d Using the Touch Screen Drag Sample Display (Menu screen) Slide your finger while touching the LCD monitor.
d Using the Touch Screen 3 Touch Control Settings 1 Select [Touch control]. Under the [53] tab, select [Touch control], then press <0>. the touch control setting. 2 Set Select the desired setting, then press <0>. [Standard] is the normal setting. [Sensitive] provides a more reactive touch response than [Standard]. Try using both settings and select the one you prefer. To disable touch-screen operations, select [Disable].
Before You Start 3 Formatting the Card If the card is new or was previously formatted by another camera or computer, format the card with this camera. When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images and data to a computer, etc., before formatting the card. 1 Select [Format card]. Under the [51] tab, select [Format card], then press <0>. the card.
Before You Start Format the card in the following cases: The card is new. The card was formatted by a different camera or a computer. The card is full of images or data. A card-related error is displayed (p.496). Low-level Formatting Perform low-level formatting if the card’s recording or reading speed seems slow or if you want to totally erase data on the card.
Before You Start 3 Disabling the Beeper You can prevent the beeper from sounding when focus is achieved, during self-timer shooting, and for touch screen operations. 1 Select [Beep]. Under the [z1] tab, select [Beep], then press <0>. [Disable]. 2 Select Select [Disable], then press <0>. The beeper will not sound. If [Touch to n] is selected, the beeper will be silent for touch screen operations only.
Before You Start 3 Setting the Image Review Time You can set how long the image is displayed on the LCD monitor immediately after shooting. To keep the image displayed, set [Hold]. To not have the image displayed, set [Off]. 1 Select [Image review]. Under the [z1] tab, select [Image review], then press <0>. the desired time. 2 Set Select the desired setting, then press <0>. If [Hold] is set, the image will be displayed until the auto power off time elapses.
Before You Start 3 Reverting the Camera to the Default SettingsN The camera’s shooting function settings and menu settings can be reverted to their defaults. 1 Select [Clear all camera settings]. Under the [54] tab, select [Clear all camera settings], then press <0>. [OK]. 2 Select Select [OK], then press <0>.
Before You Start Image Recording Settings Image quality 73 Aspect ratio 3:2 Picture Style Auto Auto Lighting Standard Optimizer Lens aberration correction Enable / Correction Peripheral illumination correction data retained 1 min. Enable Enable 2 sec.
Before You Start Live View Shooting Settings Live View shooting AF method AF operation Touch shutter Grid display Exposure simulation Silent LV shooting Metering timer Creative filters Enable u+Tracking X Disable Hide Enable Mode 1 8 sec.
Displaying the Grid You can display a grid in the viewfinder to help you check the camera tilt or compose the shot. 1 Select [Viewfinder display]. Under the [52] tab, select [Viewfinder display], then press <0>. 2 Select [Grid display]. [Show]. 3 Select When you exit the menu, the grid will appear in the viewfinder. You can display a grid on the LCD monitor during Live View shooting and before you start shooting a movie (p.270, 331).
Q Displaying the Electronic Level You can display the electronic level on the LCD monitor and in the viewfinder to help you correct the camera tilt. Note that you can check only the horizontal tilt and not the forward/backward tilt. Displaying the Electronic Level on the LCD Monitor 1 Press the button. Each time you press the button, the screen display will change. Display the electronic level.
Q Displaying the Electronic Level 3 Displaying the Electronic Level in the Viewfinder A simple electronic level using a camera icon can be displayed in the viewfinder. Since this indicator is displayed during shooting, you can take the picture while checking the camera tilt. 1 Select [Viewfinder display]. Under the [52] tab, select [Viewfinder display], then press <0>. 2 Select [Electronic level]. 3 Select [Show]. the shutter button halfway.
Displaying the Flicker DetectionN If you set this function, will appear in the viewfinder when the camera detects flicker caused by the blinking of the light source. By default, flicker detection is set to [Show]. 1 Select [Viewfinder display]. Under the [52] tab, select [Viewfinder display], then press <0>. 2 Select [Flicker detection]. 3 Select [Show]. If you set [z4: Anti-flicker shoot.] to [Enable], you can shoot with reduced unevenness of exposure caused by the flicker (p.179).
Feature Guide and Help The Feature guide and Help display information about camera features. Feature Guide The Feature guide appears when you change the shooting mode or set a shooting function, Live View shooting, movie shooting, or Quick Control for playback, and displays a brief description of that mode, function or option. It also displays a description when you select a function or option with Quick Control. The Feature guide turns off when you tap on the description or proceed with the operation.
Feature Guide and Help v Help When [zHelp] is displayed at the bottom of the menu screen, pressing the button displays the function’s description (Help). If the Help fills more than one screen, a scroll bar will appear on the right edge. You can turn the <5> dial or press the keys to scroll. Example: [z3: Long exp. noise reduction] B Scroll bar Example: [8C.Fn I-1: Exposure level increments] B Example: [8C.
2 Basic Shooting This chapter explains how to use the Basic Zone modes on the Mode Dial for best results. e With Basic Zone modes, all you do is point and shoot, and the camera sets everything automatically (p.107, 460). Also, to prevent botched pictures due to misoperations, advanced shooting function settings cannot be changed. Ba s ic n Zo Before Shooting in the <8> or Mode When the LCD monitor is turned off, press the button or button (p.
A Fully Automatic Shooting (Scene Intelligent Auto) is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. It also adjusts focus automatically by detecting whether the subject is still or moving (p.81). 1 Area AF frame Set the Mode Dial to . Turn the Mode Dial while holding down the lock release button at the center. the Area AF frame over the 2 Aim subject. All the AF points will be used to focus, and the camera will focus on the closest object.
A Fully Automatic Shooting (Scene Intelligent Auto) the picture. 4 Take Press the shutter button completely to take the picture. The captured image will be displayed for approx. 2 sec. on the LCD monitor. After you finish shooting, push down the built-in flash with your fingers. The mode makes the colors look more impressive in nature, outdoor, and sunset scenes.
A Fully Automatic Shooting (Scene Intelligent Auto) The beeper continues to beep softly. (The focus indicator does not light up.) It indicates that the camera is focusing continuously on a moving subject. (The focus indicator does not light up.) You can take sharp pictures of a moving subject. Note that the focus lock (p.81) will not work in this case. Pressing the shutter button halfway does not focus on the subject.
A Full Auto Techniques (Scene Intelligent Auto) Recomposing the Shot Depending on the scene, position the subject toward the left or right to create a balanced background and good perspective. In the mode, pressing the shutter button halfway to focus on a still subject will lock the focus on that subject. Recompose the shot while keeping the shutter button pressed halfway, and then press the shutter button completely to take the picture. This is called “focus lock”.
A Full Auto Techniques (Scene Intelligent Auto) A Live View Shooting You can shoot while viewing the image on the LCD monitor. This is called “Live View shooting”. For details, see page 255. the Live View shooting/Movie 1 Set shooting switch to . the Live View image on 2 Display the LCD monitor. Press the <0> button. The Live View image will appear on the LCD monitor. on the subject. 3 Focus Press the shutter button halfway to focus.
7 Disabling Flash The camera analyzes the scene and sets the optimum settings automatically. In places where flash photography is prohibited such as in a museum or an aquarium, use the <7> (Flash Off) mode. Shooting Tips Prevent camera shake if the numeric display (shutter speed) in the viewfinder blinks. Under low light when camera shake is prone to occur, the viewfinder’s shutter speed display will blink. Hold the camera steady or use a tripod.
C Creative Auto Shooting In the mode, you can set the following functions for shooting: (1) Ambience-based shots, (2) Background blur, (3) Drive mode, and (4) Built-in flash firing. The default settings are the same as the mode. * CA stands for Creative Auto. 1 Set the Mode Dial to . the button (7). 2 Press The Quick Control screen will appear. the desired function. 3 Set Press the or keys to select a function.
C Creative Auto Shooting Shutter speed Aperture ISO speed (3) Battery level Image-recording quality (1) (2) (4) Possible shots If you set (1) or (2) when the camera is set for Live View shooting, you can see the effect on the screen before you start shooting. (1) Ambience-based shots You can select and shoot with the ambience you want to convey in your images. Turn the <6> or <5> dial to select the ambience. You can also select it from a list by pressing <0>. For details, see page 108.
C Creative Auto Shooting (2) Background blur • If [OFF] is set, the degree of background blur will change depending on the brightness. • If it is set to any setting other than [OFF], you can adjust the background blur regardless of the brightness. • If you turn the <6> or <5> dial to move the cursor to the right, the background will look sharper. • Turning the <6> or <5> dial to move the cursor to the left will blur the subject’s background.
C Creative Auto Shooting (3) Drive mode: Use the <6> or <5> dial to make the selection. You can also select it from a list by pressing <0>. Single shooting: Shoot one image at a time. High-speed continuous shooting: While you hold down the shutter button completely, shots will be taken continuously. You can shoot up to approx. 7.0 shots per second. Low-speed continuous shooting: While you hold down the shutter button completely, shots will be taken continuously. You can shoot up to approx. 3.
8: Special Scene Mode The camera will automatically choose the appropriate settings when you select a shooting mode for your subject or scene. 1 Set the Mode Dial to <8>. the button (7). 2 Press The Quick Control screen will appear. a shooting mode. 3 Select Press the or keys to select the desired shooting mode’s icon. Turn the <6> or <5> dial to select a shooting mode.
P Shooting Food When shooting food, use
(Food). The photo will look bright and appetizing. Also, depending on the light source, the reddish tinge will be suppressed in the pictures taken under tungsten lights, etc. Shooting Tips Change the color tone. You can change [Color tone]. To increase the food’s reddish tinge, set it toward [Warm]. Set it toward [Cool] if it looks too red. Avoid using flash. If you use flash, the light may reflect off the dish or food and results in unnatural shadows.
C Shooting Children When you want to continuously focus on and shoot children running around, use (Kids). Skin tones will look healthy. Shooting Tips Track the subject with the Area AF frame. Press the shutter button halfway to start autofocusing in Area AF frame. During autofocusing, the beeper will continue beeping softly. If focus cannot be achieved, the focus indicator will blink. Shoot continuously. The default setting is (High-speed continuous shooting*).
x Shooting Candlelight Portraits When shooting a human subject in candlelight, use (Candlelight). The candlelight color tones will be retained in the photo. Shooting Tips Use the center AF point to focus. Aim the center AF point in the viewfinder over the subject, then shoot. Prevent camera shake if the numeric display (shutter speed) in the viewfinder blinks. Under low light when camera shake is prone to occur, the viewfinder’s shutter speed display will blink.
6 Shooting Night Portraits (With a Tripod) To shoot people at night and obtain a natural-looking night scene in the background, use the <6> (Night Portrait) mode. Using a tripod is recommended. Shooting Tips Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Also, use a tripod to prevent camera shake. Check the subject’s brightness. Under low light, the built-in flash will fire automatically to obtain a good exposure of the subject.
F Shooting Night Scenes (Handheld) Using a tripod when shooting a night scene gives the best results. However, the (Handheld Night Scene) mode enables you to shoot night scenes even while handholding the camera. In this shooting mode, four shots are taken continuously for each picture, and the resulting one image with reduced camera shake is recorded. Shooting Tips Hold the camera firmly. While shooting, hold the camera firmly and steadily.
G Shooting Backlit Scenes When shooting a scene having both bright and dark areas, use the (HDR Backlight Control) mode. When you take one picture in this mode, three continuous shots are taken at different exposures. This results in one image, with a wide tonal range, that has minimized the clipped shadows caused by backlighting. Shooting Tips Hold the camera firmly. While shooting, hold the camera firmly and steadily. In this mode, three shots are aligned and merged into a single image.
2 Shooting Portraits The <2> (Portrait) mode blurs the background to make the human subject stand out. It also makes skin tones and hair look softer. Shooting Tips Select the location where the distance between the subject and the background is the farthest. The further the distance between the subject and background, the more blurred the background will look. The subject will also stand out better against an uncluttered dark background. Use a telephoto lens.
3 Shooting Landscapes Use the <3> (Landscape) mode for wide scenery or to have everything in focus from near to far. For vivid blues and greens, and very sharp and crisp images. Shooting Tips With a zoom lens, use the wide-angle end. When using the wide-angle end of a zoom lens, objects near and far will be in focus better than at the telephoto end. It also adds breadth to landscapes. Shooting night scenes. The <3> mode is also good for night scenes because it disables the built-in flash.
4 Shooting Close-ups When you want to shoot flowers or small things up close, use the <4> (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips Use a simple background. A simple background makes small objects such as flowers stand out better. Move in as close as possible to the subject. Check the lens for its minimum focusing distance. Some lenses have indications such as on them.
5 Shooting Moving Subjects Use the <5> (Sports) mode to shoot a moving subject, such as a running person or a moving vehicle. Shooting Tips Use a telephoto lens. The use of a telephoto lens is recommended for shooting from a distance. Track the subject with the Area AF frame. Press the shutter button halfway to start autofocusing in Area AF frame. During autofocusing, the beeper will continue beeping softly. If focus cannot be achieved, the focus indicator will blink.
Cautions for Kids During Live View shooting, the image quality can be set to 1 or JPEG. If 41 or 61 is set, the image will be recorded in 1 quality. During Live View shooting, if flash is fired in continuous shooting, the continuous shooting speed will decrease. Even if the flash is not fired for subsequent shots, shooting will be performed with the decreased continuous shooting speed.
Cautions for Handheld Night Scene When shooting with flash, if the subject is too close to the camera, the picture may come out extremely bright (overexposure). If you use flash to shoot a night scene with few lights, the shots may not align correctly. This can result in a blurry picture. If you use flash and the human subject is close to the background that is also illuminated by the flash, the shots may not align correctly. This can result in a blurry picture.
v Applying Creative Filters In the (Creative filter) mode, you can apply one of ten filter effects (Grainy B/W*, Soft focus*, Fish-eye effect*, Toy camera effect*, Miniature effect*, Water painting effect*, HDR art standard, HDR art vivid, HDR art bold, and HDR art embossed) for shooting. When the camera is set for Live View shooting, you can see the effect on the screen before you start shooting. The camera saves only the image with the Creative filter applied.
v Applying Creative Filters a shooting mode. 5 Select Press the or keys to select a shooting mode, then press <0> and select [OK]. The image will be displayed with the effects of the filter applied. For the Miniature effect, press the keys to move the white frame to where you want the image to look sharp. Available Shooting Modes in the v Mode Shooting Mode G Page Shooting Mode Grainy B/W p.103 Z Water painting effect Page p.104 W Soft focus p.
v Applying Creative Filters You cannot select RAW or RAW+JPEG. If RAW is set, the image will be recorded in the 73 quality. Also, if RAW+JPEG is set, the image will be recorded in the set JPEG quality. When , , , , , or is set, continuous shooting cannot be set. Dust Delete Data (p.405) will not be appended to images shot with Fish-eye effect applied. is set to (Flash Off) by default. Try to prevent camera shake when shooting in low-light conditions.
v Applying Creative Filters X Fish-eye effect Gives the effect of a fish-eye lens. The image will have a barrel-type distortion. Depending on the level of this filter effect, the area trimmed along the periphery of the image changes. Also, since this filter expands the center part of the image, the resolution at the center may decrease depending on the number of recorded pixels. Check the image on the screen when setting this filter. The AF point will be fixed at center.
v Applying Creative Filters B HDR art vivid The colors are more saturated than with [HDR art standard], and the low contrast and flat gradation create a graphic art effect. C HDR art bold The colors are the most saturated, making the subject pop out, and the picture look like an oil painting. D HDR art embossed The color saturation, brightness, contrast and gradation are decreased to make the picture look flat. The picture looks faded and old.
Q Quick Control In Basic Zone modes, when the shooting function settings are displayed, you can press the button to display the Quick Control screen. The tables on the next page show the functions that can be set with the Quick Control screen in each Basic Zone mode. Example: Portrait mode the Mode Dial to a Basic Zone 1 Set mode. the button (7). 2 Press The Quick Control screen will appear. the desired function. 3 Set Press the or keys to select a function.
Q Quick Control Settable Functions in Basic Zone Modes o: Default setting*1 k: User selectable Function u: Single shooting o: High-speed continuous shooting Drive mode (p.138) i: Low-speed continuous shooting B: Silent single shooting*2 M: Silent continuous shooting*2 Self-timer (p.140) Q k a: Automatic firing Built-in flash firing D: Flash on (Fires at all times) b: Flash off A 7 C o k k k k k k o k k o k k k k k k o k k k o k k k k k k o Ambience-based shots (p.
Shooting with Ambience Selection In Basic Zone modes, when a mode other than , <7>, <8: G>, and is set, you can select the ambience for shooting.
Shooting with Ambience Selection the ambience effect. 5 Set Press the keys to select the effect so that [Effect] appears at the bottom of the screen. Press the keys to select the desired effect. the picture. 6 Take Press the shutter button completely to take the picture. To return to viewfinder shooting, press the <0> button to exit Live View shooting. Then press the shutter button completely to take the picture.
Shooting with Ambience Selection Ambience Settings 1Standard setting Standard image characteristics for the respective shooting mode. Note that <2> has image characteristics geared for portraits and <3> is geared for landscapes. Each ambience is a modification of the respective shooting mode’s image characteristics. 2 Vivid The subject will look sharp and vivid. It makes the photo look more impressive than with [1 Standard setting]. 3 Soft The subject will look softer and more dainty.
Shooting with Ambience Selection 7 Brighter The picture will look brighter. 8 Darker The picture will look darker. 9 Monochrome The picture will be monochrome. You can select the monochrome color to be blue, black and white, or sepia. When [Monochrome] is selected, will appear in the viewfinder.
Shooting by Lighting or Scene Type In the <8: C2345> Basic Zone modes, you can shoot with the settings matching the lighting or scene type. Normally, [e Default setting] is adequate, but if the settings match the lighting condition or scene, the picture will look more accurate to your eyes. For Live View shooting, if you set both [Light/scene-based shots] and [Ambience-based shots] (p.108), you should first set [Light/scenebased shots].
Shooting by Lighting or Scene Type Quick Control, select the 4 With lighting or scene type. Press the button (7). Press the keys to select [e Default setting]. [Light/scenebased shots] will appear on the screen. Press the keys to select the lighting or scene type. The resulting image with the selected lighting or scene type will be displayed. the picture. 5 Take Press the shutter button completely to take the picture.
Shooting by Lighting or Scene Type Lighting or Scene Type Settings eDefault setting Default setting suited for most subjects. fDaylight For subjects under sunlight. Gives more natural-looking blue skies and greenery and reproduces light-colored flowers better. gShade For subjects in the shade. Suitable for skin tones, which may look too bluish, and for light-colored flowers. SCloudy For subjects under overcast skies.
3 Setting the AF and Drive Modes The AF points in the viewfinder are arranged to make AF shooting suitable for a wide variety of subjects and scenes. You can also select the AF operation and drive mode that best match the shooting conditions and subject. The O icon at the upper right of the page title indicates that the function is available only in Creative Zone modes (d/ s/f/a/F). In Basic Zone modes, the AF operation and AF point (AF area selection mode) are set automatically.
f: Selecting the AF OperationN You can select the AF operation characteristics to suit the shooting conditions or subject. In Basic Zone modes, the optimum AF operation is set automatically for the respective shooting mode. 1 Set the lens’s focus mode switch to . the Mode Dial to a Creative 2 Turn Zone mode. 3 Press the button (9). the AF operation. 4 Select While looking at the LCD panel, turn the <6> or <5> dial.
f: Selecting the AF OperationN One-Shot AF for Still Subjects Suited for still subjects. When you press the shutter button halfway, the camera will focus only once. When focus is achieved, the AF point that achieved focus will be displayed, and the focus indicator in the viewfinder will also light up. With evaluative metering, the AF point exposure setting will be set at the Focus indicator same time focus is achieved. While you hold down the shutter button halfway, the focus will be locked.
f: Selecting the AF OperationN AI Servo AF for Moving Subjects This AF operation is suited for moving subjects when the focusing distance keeps changing. While you hold down the shutter button halfway, the camera will keep focusing on the subject continuously. The exposure is set at the moment the picture is taken. When the AF area selection mode (p.120) is set to 45-point automatic selection AF, focus tracking will continue as long as the Area AF frame covers the subject.
f: Selecting the AF OperationN AF Points Lighting Up in Red By default, the AF points light up in red when focus is achieved in lowlight conditions. In Creative Zone modes, you can set whether to have the AF points light up in red when focus is achieved (p.424). AF-Assist Beam with the Built-in Flash Under low-light conditions, when you press the shutter button halfway, the built-in flash may fire a brief burst of flashes. This illuminates the subject to help autofocusing.
S Selecting the AF Area and AF PointN The camera has 45 AF points for autofocusing. You can select the AF area selection mode and AF point(s) suiting the scene or subject. Depending on the lens attached to the camera, the number of usable AF points, AF point patterns, the shape of Area AF frame, etc. will differ. For details, see “Lenses and Usable AF Points” on page 128. AF Area Selection Mode You can select one of four AF area selection modes. See the next page for the selection procedure.
S Selecting the AF Area and AF PointN Selecting the AF Area Selection Mode 1 Press the or button (9). Look through the viewfinder and press the or button. the button. 2 Press Each time you press the AF area selection mode button, the AF area selection mode changes. The AF area selection mode currently set is indicated on the top of the viewfinder. With [8C.Fn II-8: Select AF area selec. mode], you can limit the selectable AF area selection modes (p.420).
S Selecting the AF Area and AF PointN Selecting the AF Point Manually You can manually select the AF point or zone. 1 Press the or button (9). The AF points will be displayed in the viewfinder. In the Zone AF mode or Large Zone AF mode, the selected zone will be displayed. an AF point. 2 Select The AF point selection will change in the direction you tilt <9>. If you press <0>, the center AF point (or center zone) will be selected.
S Selecting the AF Area and AF PointN AF Point Display Indications Pressing the or button lights up the AF points that are cross-type AF points for high-precision autofocusing. The blinking AF points are horizontal-line or vertical-line sensitive. For details, see pages 127-131.
AF Area Selection Modes S Single-point AF (Manual Selection) Select one AF point to be used for focusing. m Zone AF (Manual Selection of Zone) The AF area is divided into nine focusing zones for focusing. All the AF points in the selected zone are used for the automatic AF point selection. It is superior to single-point AF in tracking the subject, and it is effective for moving subjects. However, since it is inclined to focus on the nearest subject, focusing on a specific target may be more difficult.
AF Area Selection Modes o 45-point Automatic Selection AF The Area AF frame (entire AF area) is used to focus. This mode is set automatically in Basic Zone modes (except <8: x> and ). The AF point(s) achieving focus is displayed as . With One-Shot AF, pressing the shutter button halfway will display the AF point(s) that achieved focus. If multiple AF points are displayed, it means they all have achieved focus. This mode tends to focus on the nearest subject.
AF Area Selection Modes AF Using Color Tracking By default, AF will be performed based on color tracking. When the AF area selection mode is set to Zone AF, Large Zone AF, or 45-point automatic selection AF, focus is achieved as follows: In One-Shot AF Mode Focusing on a still human subject in the AF area is made easier. In AI Servo AF Mode Focusing on a human subject in the AF area is made easier. If no skin tones can be detected, the nearest subject will be focused on.
AF Sensor The camera’s AF sensor has 45 AF points. The illustration below shows the AF sensor pattern corresponding to each AF point. When using lenses with a maximum aperture of f/2.8 or faster, high-precision AF is possible with the center AF point in the viewfinder. Depending on the lens attached to the camera, the number of usable AF points, AF point patterns, the shape of Area AF frame, etc. vary. For details, see “Lenses and Usable AF Points” on page 128. Diagram Cross-type focusing: f/5.
Lenses and Usable AF Points Although the camera has 45 AF points, the number of usable AF points and focusing patterns vary depending on the lens. The lenses are thereby classified into eight groups from A to H. When using a lens in Groups E to H, fewer AF points will be usable. See which group each lens belongs to on pages 132-135. Check which group the lens in use belongs to. The number of available AF points varies depending on aspect ratio settings (p. 146).
Lenses and Usable AF Points Group B Autofocusing with 45 points is possible. All the AF area selection modes are selectable. : Cross-type AF point. Subject tracking is superior and highprecision focusing is achieved. Group C Autofocusing with 45 points is possible. All the AF area selection modes are selectable. : Cross-type AF point. Subject tracking is superior and highprecision focusing is achieved. : AF points sensitive to horizontal lines. Group D Autofocusing with 45 points is possible.
Lenses and Usable AF Points Group E Autofocusing with only 35 points is possible. (Not possible with all 45 AF points.) All the AF area selection modes are selectable. During automatic AF point selection, the outer frame marking the AF area (Area AF frame) will be different from 45-point automatic selection AF. : Cross-type AF point. Subject tracking is superior and highprecision focusing is achieved. : AF points sensitive to horizontal lines. : Disabled AF points (not displayed).
Lenses and Usable AF Points Group G Autofocusing with only 27 points is possible. (Not possible with all 45 AF points.) Large Zone AF (manual selection of zone) cannot be selected for AF area selection mode. During automatic AF point selection, the outer frame marking the AF area (Area AF frame) will be different from 45-point automatic selection AF. : Cross-type AF point. Subject tracking is superior and highprecision focusing is achieved. : AF points sensitive to horizontal lines.
Lenses and Usable AF Points Lens Group Designations (as of the release of EOS 80D (W)) EF-S24mm f/2.8 STM EF-S60mm f/2.8 Macro USM EF-S10-18mm f/4.5-5.6 IS STM EF-S10-22mm f/3.5-4.5 USM EF-S15-85mm f/3.5-5.6 IS USM EF-S17-55mm f/2.8 IS USM EF-S17-85mm f/4-5.6 IS USM EF-S18-55mm f/3.5-5.6 EF-S18-55mm f/3.5-5.6 USM EF-S18-55mm f/3.5-5.6 II EF-S18-55mm f/3.5-5.6 II USM EF-S18-55mm f/3.5-5.6 III EF-S18-55mm f/3.5-5.6 IS EF-S18-55mm f/3.5-5.6 IS II EF-S18-55mm f/3.5-5.6 IS STM EF-S18-135mm f/3.5-5.
Lenses and Usable AF Points EF200mm f/2.8L II USM + Extender EF1.4x I/II/III EF200mm f/2.8L II USM + Extender EF2x I/II/III EF300mm f/2.8L USM EF300mm f/2.8L USM + Extender EF1.4x I/II/III EF300mm f/2.8L USM + Extender EF2x I/II/III EF300mm f/2.8L IS USM EF300mm f/2.8L IS USM + Extender EF1.4x I/II/III EF300mm f/2.8L IS USM + Extender EF2x I/II/III EF300mm f/2.8L IS II USM EF300mm f/2.8L IS II USM + Extender EF1.4x I/II/III EF300mm f/2.
Lenses and Usable AF Points EF800mm f/5.6L IS USM + Extender EF1.4x I/II/III EF1200mm f/5.6L USM EF1200mm f/5.6L USM + Extender EF1.4x I/II/III EF8-15mm f/4L Fisheye USM EF11-24mm f/4L USM EF16-35mm f/2.8L USM EF16-35mm f/2.8L II USM EF16-35mm f/4L IS USM EF17-35mm f/2.8L USM EF17-40mm f/4L USM EF20-35mm f/2.8L EF20-35mm f/3.5-4.5 USM EF22-55mm f/4-5.6 USM EF24-70mm f/2.8L USM EF24-70mm f/2.8L II USM EF24-70mm f/4L IS USM EF24-85mm f/3.5-4.5 USM EF24-105mm f/3.5-5.
Lenses and Usable AF Points EF70-200mm f/4L IS USM EF70-200mm f/4L IS USM + Extender EF1.4x I/II/III EF70-200mm f/4L IS USM + Extender EF2x I/II/III EF70-210mm f/3.5-4.5 USM EF70-210mm f/4 EF70-300mm f/4-5.6 IS USM EF70-300mm f/4-5.6L IS USM EF70-300mm f/4.5-5.6 DO IS USM EF75-300mm f/4-5.6 EF75-300mm f/4-5.6 USM EF75-300mm f/4-5.6 II EF75-300mm f/4-5.6 II USM EF75-300mm f/4-5.6 III EF75-300mm f/4-5.6 III USM EF75-300mm f/4-5.6 IS USM EF80-200mm f/2.8L EF80-200mm f/4.5-5.6 EF80-200mm f/4.5-5.
When Autofocus Fails Autofocus may fail to achieve focus (viewfinder’s focus indicator blinks) with certain subjects such as the following: Subjects Difficult to Focus Subjects with very low contrast (Example: Blue skies, solid-color flat surfaces, etc.) Subjects in very low light Strongly backlit or reflective subjects (Example: Cars with highly reflective bodies, etc.) Near and distant subjects framed close to an AF point (Example: Animals in cages, etc.
When Autofocus Fails MF: Manual Focus 1 Set the lens’s focus mode switch to . <4 L> will be displayed on the LCD panel. Focusing ring on the subject. 2 Focus Focus by turning the lens’s focusing ring until the subject looks sharp in the viewfinder. If you press the shutter button halfway during manual focusing, the AF point that achieved focus and the focus indicator will light up in the viewfinder.
i Selecting the Drive Mode Single and continuous drive modes are provided. 1 Press the button (9). the drive mode. 2 Select While looking at the LCD panel, turn the <6> or <5> dial. u : Single shooting When you press the shutter button completely, only one shot will be taken. o: High-speed continuous shooting (Max. approx. 7.0 shots/sec.*) While you hold down the shutter button completely, the camera will shoot continuously.
i Selecting the Drive Mode o: The maximum continuous shooting speed of approx. 7.0 shots/sec. is attained under the following conditions*: 1/500 sec. or faster shutter speed, maximum aperture (varies depending on the lens), Anti-flicker shooting set to Disable, with a fully-charged Battery Pack LP-E6N, and at room temperature (23°C/73°F).
j Using the Self-timer Use the self-timer when you want to be in the picture. 1 Press the button (9). the self-timer. 2 Select While looking at the LCD panel, turn the <6> or <5> dial to select the self-timer delay. Q : Shoot in approx. 10 sec. k : Shoot in approx. 2 sec. the picture. 3 Take Look through the viewfinder, focus on the subject, then press the shutter button completely.
4 Image Settings This chapter explains image-related function settings: Image-recording quality, ISO speed, Picture Style, white balance, Auto Lighting Optimizer, noise reduction, lens aberration correction, anti-flicker shooting, and other functions. In Basic Zone modes, only the following can be set as described in this chapter: Image-recording quality, folder creation and selection, and image file numbering.
3 Setting the Image-Recording Quality You can select the pixel count and the image quality. There are eight JPEG image-recording quality settings: 73, 83, 74, 84, 7a, 8a, b, c. There are three RAW image quality settings: 1, 41, 61 (p.144). 1 Select [Image quality]. Under the [z1] tab, select [Image quality], then press <0>. the image-recording quality. 2 Set To select a RAW setting, turn the <6> dial. To select a JPEG setting, press the keys.
3 Setting the Image-Recording Quality Guide to Image-Recording Quality Settings (Approx.) Image Quality 73 83 74 JPEG 84 7a Pixels Printing Recorded Size 24M A2 11M A3 File Size (MB) Possible Maximum Burst Shots 7.6 940 77 (110) 3.9 1800 120 (120) 4.1 1730 140 (140) 2.0 3430 140 (140) 2.6 2700 140 (140) 1.3 5260 150 (150) 5.9M A4 b*1 2.5M 9x13 cm 1.3 5260 150 (150) c*2 0.3M - 0.3 20180 150 (150) 1 20 (25) 8a 24M A2 28.9 240 RAW 41 14M A3 22.
3 Setting the Image-Recording Quality If you select both RAW and JPEG, the same image will be recorded simultaneously to the card in both RAW and JPEG at the imagerecording qualities that were set. The two images will be recorded with the same file numbers (file extension: .JPG for JPEG and .CR2 for RAW). The image-recording quality icons are as follows: 1 (RAW), 41 (Middle RAW), 61 (Small RAW), JPEG, 7 (Fine), 8 (Normal), 3 (Large), 4 (Middle), 6 (Small).
3 Setting the Image-Recording Quality Maximum Burst for Continuous Shooting The approximate maximum burst is displayed on the bottom right in the viewfinder and on the shooting function settings screen. If the maximum burst for continuous shooting is 99 or higher, “99” will be displayed. The maximum burst is displayed even when a card is not inserted in the camera. Make sure that a card is inserted before taking a picture.
3 Changing the Image’s Aspect RatioN You can change the image’s aspect ratio. [3:2] is set by default. When [4:3], [16:9], or [1:1] is set, frame lines indicating the shooting area will be displayed in the viewfinder. During Live View shooting, the image appears with the surrounding area masked in black on the LCD monitor. 1 Select the aspect ratio. Under the [z4] tab, select [Aspect ratio], then press <0>. the aspect ratio. 2 Set Select an aspect ratio, then press <0>.
3 Changing the Image’s Aspect RatioN The table below shows the aspect ratio and the number of recorded pixels for each image-recording quality. Image Quality Aspect Ratio and Pixel Count (Approx.) 3:2 4:3 16:9 1:1 3 6000x4000 5328x4000* 6000x3368* 4000x4000 (24.0 megapixels) (21.3 megapixels) (20.2 megapixels) (16.0 megapixels) 4 3984x2656 3552x2664 3984x2240* 2656x2656 (10.6 megapixels) (9.5 megapixels) (8.9 megapixels) (7.1 megapixels) a 2976x1984 2656x1992 2976x1680* 1984x1984 (5.
i: Setting the ISO Speed for Still PhotosN Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In Basic Zone modes, the ISO speed is set automatically (p.150). Regarding the ISO speed during movie shooting, see pages 296 and 299. 1 Press the button (9). the ISO speed. 2 Set While looking at the LCD panel or in the viewfinder, turn the <6> or <5> dial. ISO speed can be set within ISO 100 - ISO 16000 in 1/3-stop increments. “A” indicates ISO Auto.
i: Setting the ISO Speed for Still PhotosN As “H” (equivalent to ISO 25600) is an expanded ISO speed setting, noise (dots of light, banding, etc.) and irregular colors will be more noticeable, and the resolution will be lower compared with the standard setting. If [z3: Highlight tone priority] is set to [Enable], ISO 100/125/160 and “H” (equivalent to ISO 25600) cannot be selected (p.174). Shooting in high temperatures may result in images that look grainier.
i: Setting the ISO Speed for Still PhotosN ISO Auto If the ISO speed is set to “A” (Auto), the actual ISO speed setting will be displayed when you press the shutter button halfway. As indicated below, the ISO speed will be set automatically to suit the shooting mode.
i: Setting the ISO Speed for Still PhotosN 3 Setting the Manually-Settable ISO Speed Range You can set the manually-settable ISO speed range (minimum and maximum limits). You can set the minimum limit within ISO 100 to ISO 16000, and the maximum limit within ISO 200 to H (equivalent to ISO 25600). 1 Select [ISO speed settings]. Under the [z2] tab, select [ISO speed settings], then press <0>. 2 Select [Range for stills]. the minimum limit. 3 Set Select the minimum limit box, then press <0>.
i: Setting the ISO Speed for Still PhotosN 3 Setting the ISO Speed Range for ISO Auto You can set the automatic ISO speed range for ISO Auto within ISO 100 - ISO 16000. You can set the minimum limit within ISO 100 - ISO 12800, and the maximum limit within ISO 200 - ISO 16000 in 1-stop increments. 1 Select [Auto range]. the minimum limit. 2 Set Select the minimum limit box, then press <0>. Select the ISO speed, then press <0>. the maximum limit. 3 Set Select the maximum limit box, then press <0>.
i: Setting the ISO Speed for Still PhotosN 3 Setting the Minimum Shutter Speed for ISO Auto You can set the minimum shutter speed so that the shutter speed set automatically will not be too slow when ISO Auto is set. This is useful in the and modes when you use a wide-angle lens to shoot a moving subject or when you use a telephoto lens. It helps to reduce camera shake and blurred subjects. 1 Automatically set Manually set Select [Min. shutter spd.]. the desired minimum shutter 2 Set speed.
A Selecting a Picture StyleN By selecting a Picture Style, you can obtain image characteristics matching your photographic expression or the subject. In Basic Zone modes, [D] (Auto) is set automatically. (In modes, [P] (Standard) is set.) 1 Select [Picture Style]. Under the [z3] tab, select [Picture Style], then press <0>. a Picture Style. 2 Select Select a Picture Style, then press <0>. The Picture Style will be set.
A Selecting a Picture StyleN R Landscape For vivid blues and greens, and very sharp and crisp images. Effective for impressive landscapes. u Fine Detail Suited for detailed outline and fine texture description of the subject. The colors will be slightly vivid. S Neutral This Picture Style is for users who prefer to process images with their computer. For natural colors and subdued images with modest brightness and color saturation. U Faithful Suited for processing the image with a computer.
A Selecting a Picture StyleN Symbols The Picture Style selection screen has icons for [Strength], [Fineness], or [Threshold] of [Sharpness], [Contrast], and other parameters. The numerals indicate the set values for these parameters set for the respective Picture Style.
A Customizing a Picture StyleN You can customize the Picture Styles. You can change or adjust the parameter settings of Picture Styles such as [Strength], [Fineness], or [Threshold] of [Sharpness], and [Contrast], and other parameters from the default settings. To see the resulting effects, take test shots. To customize [Monochrome], see page 159. 1 Select [Picture Style]. Under the [z3] tab, select [Picture Style], then press <0>. a Picture Style.
A Customizing a Picture StyleN Press the button to save the adjusted parameters. The Picture Style selection screen will reappear. Any parameter settings different from the default will be displayed in blue.
A Customizing a Picture StyleN V Monochrome Adjustment Besides the effects described on the preceding page such as [Contrast], or [Strength], [Fineness] and [Threshold] of [Sharpness], you can also set [Filter effect] and [Toning effect]. k Filter effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more. Filter Sample Effects N: None Normal black-and-white image with no filter effects.
A Registering a Picture StyleN You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. You can create multiple Picture Styles with different settings. You can also adjust the parameters of a Picture Style that is registered to the camera with EOS Utility (EOS software, p.512). 1 Select [Picture Style]. Under the [z3] tab, select [Picture Style], then press <0>. [User Def. *].
A Registering a Picture StyleN a parameter. 5 Select Select the parameter (such as [Sharpness] - [Strength]) to be set, then press <0>. the parameter. 6 Set Adjust the parameter as desired, then press <0>. For details, see “Customizing a Picture Style” (p.157). Press the button to register the modified Picture Style. The Picture Style selection screen will then reappear. The base Picture Style will be indicated on the right of [User Def. *].
3 Setting the White BalanceN White balance (WB) is for making the white areas look white. Normally, the Auto [Q] (Ambience priority) or [Qw] (White priority) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with Auto, you can select the white balance to match the light source or set it manually by shooting a white object. In Basic Zone modes, [Q] (Ambience priority) is set automatically. (In the
mode, [Qw] (White priority) is set.) 1 Select [White balance].
3 Setting the White BalanceN White Balance To the human eye, a white object looks white regardless of the type of lighting. With a digital camera, the white for color correction basis is decided depending on the color temperature of the illumination, and then the color is adjusted with software to make the white areas look white. With this function, pictures with natural color tones can be taken.
3 Setting the White BalanceN Cautions for Setting [Qw] (White priority) The warm color cast of subjects may fade. When multiple light sources are included on the screen, the warm color cast of the picture may not be lessened. When using flash, the color tone will be the same as [Q] (Ambience priority). O Custom White Balance Custom white balance enables you to manually set the white balance for a specific light source.
3 Setting the White BalanceN [White balance]. 4 Select Under the [z2] tab, select [White balance], then press <0>. the custom white balance. 5 Select Select [ ], then press <0>. O If the exposure obtained in step 1 differs greatly from the standard exposure, a correct white balance may not be obtained.
3 Setting the White BalanceN P Setting the Color Temperature You can set the white balance’s color temperature numerically. This function is for advanced users. 1 Select [White balance]. Under the [z2] tab, select [White balance], then press <0>. the color temperature. 2 Set Select [P]. Turn the <6> dial to set the color temperature, then press <0>. The color temperature can be set from approx. 2500 K to 10000 K in 100 K increments.
3 White Balance CorrectionN You can correct the white balance that is set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. This function is for advanced users, particularly for those users who understand the use of color temperature conversion and color compensating filters and their effects. White Balance Correction 1 Select [WB Shift/Bkt.].
3 White Balance CorrectionN White Balance Auto Bracketing With just one shot, three images with different color tones can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias and magenta/green bias. This function is called white balance bracketing (WB Bkt.). White balance bracketing is possible up to ±3 levels in single-level increments. Set the white balance bracketing amount.
3 Auto Correction of Brightness and ContrastN If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. This function is called Auto Lighting Optimizer. The default setting is [Standard]. With JPEG images, the correction is applied when the image is captured. In Basic Zone modes, [Standard] is set automatically. 1 Select [Auto Lighting Optimizer]. Under the [z2] tab, select [Auto Lighting Optimizer], then press <0>. the setting.
3 Setting Noise ReductionN High ISO Speed Noise Reduction This function reduces the noise generated in the image. Although noise reduction is applied at all ISO speeds, it is particularly effective at high ISO speeds. When shooting at low ISO speeds, the noise in the darker parts of the image (shadow areas) can further be reduced. 1 Select [High ISO speed NR]. Under the [z3] tab, select [High ISO speed NR], then press <0>. the level. 2 Set Select the desired noise reduction level, then press <0>.
3 Setting Noise ReductionN Cautions for Setting Multi Shot Noise Reduction If there is significant misalignment in the image due to camera shake, the noise reduction effect may become smaller. If you are handholding the camera, keep it steady to prevent camera shake. Using a tripod is recommended. If you shoot a moving subject, the moving subject may leave afterimages. The image alignment may not function properly with repetitive patterns (lattice, stripes, etc.) or flat, single-tone images.
3 Setting Noise ReductionN Long Exposure Noise Reduction Noise reduction is possible with images exposed for 1 sec. or longer. 1 Select [Long exp. noise reduction]. Under the [z3] tab, select [Long exp. noise reduction], then press <0>. the desired setting. 2 Set Select the desired setting, then press <0>. Auto For exposures of 1 sec. or longer, noise reduction is performed automatically if noise typical of long exposures is detected. This [Auto] setting is effective in most cases.
3 Setting Noise ReductionN With [Auto] and [Enable], the noise reduction process after the picture is taken may take the same amount of time as that for the exposure. You cannot take another picture until the noise reduction process is completed. Images taken at ISO 1600 or higher may look grainier with the [Enable] setting than with the [Disable] or [Auto] setting.
3 Highlight Tone PriorityN You can reduce overexposed, clipped highlights. 1 Select [Highlight tone priority]. Under the [z3] tab, select [Highlight tone priority], then press <0>. [Enable]. 2 Select Highlight details are improved. The dynamic range is expanded from the standard 18% gray to bright highlights. The gradation between the grays and highlights becomes smoother. the picture. 3 Take The image will be recorded with highlight tone priority applied.
3 Correction of Lens Peripheral Illumination and AberrationsN Peripheral light fall-off is a phenomenon that makes the image corners look darker due to the lens characteristics. Color fringing along subject outlines is called chromatic aberration. And image distortion due to lens characteristics is called distortion. These lens aberrations and light falloff can be corrected.
3 Correction of Lens Peripheral Illumination and AberrationsN Chromatic Aberration Correction 1 Select the setting. Check that [Correction data available] is displayed for the attached lens. Select [Chromatic aberration], then press <0>. Select [Enable], then press <0>. the picture. 2 Take The image will be recorded with the chromatic aberration corrected. Distortion Correction 1 Select the setting. Check that [Correction data available] is displayed for the attached lens.
3 Correction of Lens Peripheral Illumination and AberrationsN When distortion correction is enabled, the camera records an image range narrower than the one seen through the viewfinder. (Image periphery will be slightly trimmed and resolution slightly lowered.) Distortion correction will be reflected in the captured image, but not in the viewfinder or Live View image during shooting. If you set [Distortion correction] to [Enable], the maximum burst (p.145) during continuous shooting will decrease.
3 Correction of Lens Peripheral Illumination and AberrationsN Cautions for Lens Correction Peripheral illumination correction, chromatic aberration correction, and distortion correction cannot be applied to JPEG images already taken. When using a non-Canon lens, setting the corrections to [Disable] is recommended, even if [Correction data available] is displayed.
3 Reducing FlickerN If you shoot an image with a fast shutter speed under a light source such as fluorescent light, the blinking of the light source causes flicker and the image may be vertically unevenly exposed. If continuous shooting is used under these conditions, uneven exposures or colors across the images may result.
3 Reducing FlickerN If the subject is against a dark background or if there is a bright light in the image, flicker may not be properly detected. Under certain special types of lighting, the camera may not be able to reduce the effects of the flicker even when is displayed in the viewfinder. Depending on the light source, flicker may not be detected properly. If you recompose a shot, may appear and disappear intermittently.
3 Setting the Color SpaceN The range of reproducible colors is called “color space”. With this camera, you can set the color space for captured images to sRGB or Adobe RGB. For normal shooting, sRGB is recommended. In Basic Zone modes, sRGB is set automatically. 1 Select [Color space]. Under the [z2] tab, select [Color space], then press <0>. the desired color space. 2 Set Select [sRGB] or [Adobe RGB], then press <0>.
3 Creating and Selecting a Folder You can freely create and select the folder where the captured images are to be saved. This operation is optional since a folder will be created automatically for saving captured images. Creating a Folder 1 Select [Select folder]. Under the [51] tab, select [Select folder], then press <0>. 2 Select [Create folder]. [OK]. 3 Select A new folder with the folder number increased by one is created.
3 Creating and Selecting a Folder Selecting a Folder Lowest file number Number of images in folder Select a folder on the folder selection screen, then press <0>. The folder where the captured images will be saved is selected. Subsequent captured images will be recorded into the selected folder. Folder name Highest file number Folders As with “100CANON” for example, the folder name starts with three digits (the folder number) followed by five alphanumeric characters.
3 File Numbering Methods The image files will be numbered from 0001 to 9999 in the order the images are taken, then saved in a folder. You can change how the file number is assigned. 1 (Example) IMG_0001.JPG File number Select [File numbering]. Under the [51] tab, select [File numbering], then press <0>. the file numbering method. 2 Select Select the desired setting, then press <0>. Continuous Continues the file numbering sequence even after the card is replaced or a new folder is created.
3 File Numbering Methods Auto Reset Restarts the file numbering from 0001 each time the card is replaced or a new folder is created. When you replace the card or create a folder, the file numbering restarts from 0001 for the new images saved. This is useful if you want to organize images by cards or folders.
3 Setting Copyright InformationN When you set the copyright information, it will be recorded to the image as Exif information. 1 Select [Copyright information]. Under the [54] tab, select [Copyright information], then press <0>. the option to be set. 2 Select Select [Enter author’s name] or [Enter copyright details], then press <0>. text. 3 Enter Press the button to toggle Text palette 186 between the top and bottom entry areas.
3 Setting Copyright InformationN the setting. 4 Exit After entering the text, press the button, then select [OK]. The information will be saved and the screen will return to step 2. Checking the Copyright Information When you select [Display copyright info.] in step 2, you can check the [Author] and [Copyright] information that you entered. If the entry for “Author” or “Copyright” is long, it may not be displayed entirely when you select [Display copyright info.].
5 Advanced Operations In Creative Zone modes, you can change various settings of the camera as you desire to obtain a wide variety of shooting results, by selecting the shutter speed and/or aperture, adjusting the exposure as you prefer, etc. The O icon at the upper right of the page title indicates that the function is available only in Creative Zone modes (d/ s/f/a/F).
d: Program AE The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. * stands for Program. * AE stands for Auto Exposure. 1 Set the Mode Dial to . on the subject. 2 Focus Look through the viewfinder and aim the AF point over the subject. Then press the shutter button halfway. When focus is achieved, the focus indicator on the viewfinder’s bottom right will light up (when in One-Shot AF mode).
d: Program AE If the “30"” shutter speed and the lowest f/number blink, it indicates underexposure. Increase the ISO speed or use flash. If the “8000” shutter speed and the highest f/number blink, it indicates overexposure. Lower the ISO speed or use an ND filter (sold separately) to reduce the amount of light entering the lens. Differences Between and Modes In the mode, many functions, such as the AF operation and metering mode, are set automatically to prevent spoiled shots.
s: Shutter-Priority AE In this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the standard exposure matching the brightness of the subject. This is called shutter-priority AE. A faster shutter speed can freeze the action of a moving subject. A slower shutter speed can create a blurred effect, giving the impression of motion. * stands for Time value. Blurred motion (Slow shutter speed: 1/30 sec.) 1 Frozen motion (Fast shutter speed: 1/2000 sec.
s: Shutter-Priority AE If the lowest f/number blinks, it indicates underexposure. Turn the <6> dial to set a slower shutter speed until the aperture stops blinking or set a higher ISO speed. If the highest f/number blinks, it indicates overexposure. Turn the <6> dial to set a faster shutter speed until the aperture stops blinking or set a lower ISO speed. Shutter Speed Display The shutter speeds from “8000” to “4” indicate the denominator of the fractional shutter speed.
f: Aperture-Priority AE In this mode, you set the desired aperture and the camera sets the shutter speed automatically to obtain the standard exposure matching the subject brightness. This is called aperture-priority AE. A higher f/number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus. On the other hand, a lower f/number (larger aperture hole) will make less of the foreground and background fall within acceptable focus.
f: Aperture-Priority AE If the “30"” shutter speed blinks, it indicates underexposure. Turn the <6> dial to set a faster aperture (lower f/number) until the shutter speed blinking stops or set a higher ISO speed. If the “8000” shutter speed blinks, it indicates overexposure. Turn the <6> dial to set a slower aperture (higher f/number) until the shutter speed blinking stops or set a lower ISO speed. Aperture Value Display The higher the f/number, the smaller the aperture opening will be.
a: Manual Exposure In this mode, you set both the shutter speed and aperture as desired. To determine the exposure, refer to the exposure level indicator in the viewfinder or use a commercially-available exposure meter. This method is called manual exposure. * stands for Manual. 1 Set the Mode Dial to . 2 Set the ISO speed (p.148). the shutter speed and aperture. 3 Set To set the shutter speed, turn the <6> dial. To set the aperture, turn the <5> dial.
a: Manual Exposure Exposure Compensation with ISO Auto If the ISO speed is set to A (AUTO) for manual exposure shooting, you can set exposure compensation (p.200) as follows: • [z2: Expo.comp./AEB] • Under [8C.Fn III-4: Custom Controls] with [s: Expo comp (hold btn, turnS)] (p.438). • Quick Control (p.56) If ISO Auto is set, the ISO speed setting will change to suit the shutter speed and aperture in order to obtain a standard exposure. Therefore, you may not obtain the desired exposure effect.
q Selecting the Metering ModeN You can select one of four methods to measure the subject brightness. In Basic Zone modes, evaluative metering is set automatically. (In the <8: x> and modes, center-weighted average metering is set.) 1 Press the button (9). the metering mode. 2 Select While looking at the LCD panel, turn the <6> or <5> dial.
q Selecting the Metering ModeN e Center-weighted average metering The metering is averaged for the entire scene with the viewfinder center weighted more heavily. With q (Evaluative metering), the exposure setting will be locked when you press the shutter button halfway and focus is achieved. In the w (Partial metering), r (Spot metering), and e (Center-weighted average metering) modes, the exposure is set at the moment the picture is taken. (Pressing the shutter button halfway does not lock the exposure.
O Setting Exposure CompensationN Exposure compensation can brighten (increased exposure) or darken (decreased exposure) the standard exposure set by the camera. Exposure compensation can be set in the , , and shooting modes. Although you can set the exposure compensation up to ±5 stops* in 1/3-stop increments, the exposure compensation indicator in the viewfinder and on the LCD panel can only display the setting up to ±3 stops.
Auto Exposure Bracketing (AEB)N By changing the shutter speed or aperture automatically, the camera brackets the exposure up to ±3 stops in 1/3-stop increments for three successive shots. This is called AEB. * AEB stands for Auto Exposure Bracketing. 1 Select [Expo.comp./AEB]. Under the [z2] tab, select [Expo.comp./AEB], then press <0>. the AEB range. 2 Set Turn the <6> dial to set the AEB AEB range range. Press the keys to set the exposure compensation amount. Press <0> to set it.
Auto Exposure Bracketing (AEB)N During AEB, in the viewfinder and AEB range will blink. If the drive mode is set to or , press the shutter button three times for each shot. When , , or is set and you hold down the shutter button completely, the three bracketed shots will be taken continuously and the camera will automatically stop shooting. When or is set, the three bracketed shots will be taken continuously after a 10-sec. or 2-sec. delay.
A AE LockN You can lock the exposure when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure setting. Press the button to lock the exposure, then recompose and take the picture. This is called AE lock. It is effective for shooting backlit subjects, etc. 1 Focus on the subject. Press the shutter button halfway. The exposure setting will be displayed. the button (0).
F: Bulb Exposures In this mode, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutter button. This is called bulb exposure. Use bulb exposures for night scenes, fireworks, the heavens, and other subjects requiring long exposures. 1 Set the Mode Dial to . the desired aperture. 2 Set While looking at the LCD panel, turn the <6> or <5> dial. the picture.
F: Bulb Exposures With [z3: Long exp. noise reduction], you can reduce the noise generated during long exposures (p.172). For bulb exposures, using a tripod and bulb timer is recommended. Using mirror lockup (p.219) with bulb exposures is also possible. You can also shoot bulb exposures by using Remote Switch RS-60E3 (sold separately, p.221). You can also use Remote Controller RC-6 (sold separately, p.221) for bulb exposures.
F: Bulb Exposures the desired exposure time. 3 Set Select the hour, minute, or second. Press <0> so is displayed. Set the desired number, then press <0>. (Returns to .) [OK]. 4 Select The set time will be displayed on the menu screen. When you exit the menu, will be displayed on the LCD panel. Bulb timer the picture. 5 Take Press the shutter button completely, and the bulb exposure will start and continue until the set time elapses.
w: HDR (High Dynamic Range) ShootingN Clipped highlights and shadows will be reduced for a high dynamic range of tones even with high-contrast scenes. HDR shooting is effective for landscape and still-life shots. With HDR shooting, three images of different exposures (standard exposure, underexposure, and overexposure) are captured continuously for each shot and then merged together automatically. The HDR image is recorded as a JPEG image. * HDR stands for High Dynamic Range. 1 Select [HDR Mode].
w: HDR (High Dynamic Range) ShootingN Effects Natural For images preserving a wide tonal range where the highlight and shadow details would otherwise be lost. Clipped highlights and shadows will be reduced. Art standard While the clipped highlights and shadows will be reduced more than with [Natural], the contrast will be lower, and the gradation flatter to have the picture look like a painting. The subject outlines will have bright (or dark) edges.
w: HDR (High Dynamic Range) ShootingN [Continuous HDR]. 4 Set Select either [1 shot only] or [Every shot], then press <0>. With [1 shot only], HDR shooting will be canceled automatically after the shooting ends. With [Every shot], HDR shooting continues until the setting in step 3 is set to [Disable HDR]. [Auto Image Align]. 5 Set For handheld shooting, select [Enable]. When using a tripod, select [Disable], then press <0>. the picture.
w: HDR (High Dynamic Range) ShootingN You cannot select RAW or RAW+JPEG. The HDR mode cannot be set if RAW or RAW+JPEG is set. The HDR mode cannot be set when AEB, WB bracketing, Multi Shot Noise Reduction, or multiple exposures are set, or during bulb exposures and movie shooting. HDR shooting is not possible with ISO expansion (H). HDR shooting is possible within ISO 100 - ISO 16000. The flash will not fire during HDR shooting.
w: HDR (High Dynamic Range) ShootingN When shooting HDR images with [Auto Image Align] set to [Enable], AF point display information (p.352) and Dust Delete Data (p.405) will not be appended to the image. If you perform handheld HDR shooting with [Auto Image Align] set to [Enable], image periphery will be slightly trimmed and resolution will be slightly lowered. Also, if the images cannot be aligned properly due to camera shake, etc., auto image alignment may not take effect.
P Multiple ExposuresN You can shoot two to nine exposures to be merged into one image. With Live View shooting (p.255), you can see in real time how the exposures are merged when you shoot multiple-exposure images. 1 Select [Multiple exposure]. Under the [z3] tab, select [Multiple exposure], then press <0>. [Multiple exposure]. 2 Set Select [Enable], then press <0>. To exit shooting multiple exposures, select [Disable]. [Multi-expos ctrl].
P Multiple ExposuresN Average Based on the [No. of exposures], negative exposure compensation is set automatically as you shoot multiple exposures. If you shoot multiple exposures of the same scene, the exposure of the subject’s background will be automatically controlled to obtain the standard exposure. the [No. of exposures]. 4 Set Set the number of exposures, then press <0>. You can set it from 2 to 9 exposures. [Continue Mult-exp].
P Multiple ExposuresN subsequent exposures. 7 Shoot The merged multiple-exposure image will be displayed. With Live View shooting, the multipleexposure images merged so far will be displayed. By pressing the button, you can display only the Live View image. Multiple-exposure shooting will end when the set number of exposures are taken. With continuous shooting, if you keep holding down the shutter button, the shooting continues until the set numbers of exposures are taken.
P Multiple ExposuresN During continuous shooting, the continuous shooting speed will decrease greatly. Only the merged multiple-exposure image will be saved. The images taken in steps 6 and 7 for the multiple-exposure image will not be saved. The image-recording quality, ISO speed, Picture Style, high ISO speed noise reduction and color space, etc. set for the first single exposure will also be set for the subsequent exposures. You cannot set an aspect ratio for multiple-exposure shooting.
P Multiple ExposuresN Merging Multiple Exposures with an Image Recorded on the Card You can select a 1 image recorded on the card as the first single exposure. The image data of the selected 1 image will remain intact. You can only select 1 images. You cannot select 41/61 or JPEG images. 1 Select [Select image for multi. expo.]. The images on the card will be displayed. the first image. 2 Select Turn the <5> dial to select the image to be used as the first single exposure, then press <0>.
P Multiple ExposuresN Checking and Deleting Multiple Exposures During Shooting Before you finish shooting the set number of exposures, you can press the button to check the current exposure level, overlap alignment, and overall effect of the merged multipleexposure image. If you press the button, the operations possible during multipleexposure shooting will be displayed. Operation Description q Undo last image Deletes the last image you shot (shoot another image).
P Multiple ExposuresN FAQ Are there any restrictions on the image-recording quality? All JPEG image-recording quality settings can be selected. If 41 or 61 is set, the merged multiple-exposure image will be a 1 image. Image-Recording Quality Setting JPEG Merged Multiple-Exposure Image JPEG 1 1 41/61 1 1+JPEG 1+JPEG 41/61+JPEG 1+JPEG Can I merge images recorded on the card? With [Select image for multi. expo.], you can select the first single exposure from the images recorded on the card (p.
2 Mirror LockupN Camera vibrations caused by the mirror’s reflex action when the picture is taken is called “mirror shock”. Mirror lockup keeps the mirror up before and during exposure to reduce blur caused by camera vibrations. Useful when shooting close-ups (macro photography), using a super telephoto lens, and shooting at slow shutter speeds. 1 Set [Mirror lockup] to [Enable]. Under the [z4] tab, select [Mirror lockup], then press <0>. Select [Enable], then press <0>.
Using the Eyepiece Cover Even if the drive mode is set to continuous shooting, only one shot can be taken. You can also use the self-timer with mirror lockup. If approx. 30 sec. elapse after the mirror is locked up, it will go back down automatically. Pressing the shutter button completely again locks up the mirror again. When shooting with mirror lockup, using a tripod and Remote Switch RS-60E3 (sold separately, p.221) is recommended. You can also use a remote controller (sold separately, p.
F Using a Remote Switch You can connect Remote Switch RS-60E3 (sold separately) to the camera and shoot (p.468). For detailed instructions, refer to the remote switch’s instruction manual. 1 Open the terminal cover. the plug to the remote 2 Connect control terminal. R Remote Control Shooting With Remote Controller RC-6 (sold separately), you can shoot remotely up to approx. 5 meters/16.4 feet away from the camera. You can either shoot immediately or with a 2-sec. delay.
R Remote Control Shooting the self-timer. 4 Select Look at the LCD panel and turn the <6> dial to select or . the remote controller’s 5 Press transmit button. Remote control sensor Point the remote controller toward the camera’s remote control sensor, and press the transmit button. The self-timer lamp lights up and the picture is taken. Fluorescent or LED lighting may cause camera misoperation by triggering the shutter inadvertently. Try to keep the camera away from such light sources.
p Interval Timer Shooting With the interval timer, you can set the shooting interval and the number of shots. The camera will take a series of single shots at the set interval until the set number of shots are taken. 1 Select [Interval timer]. Under the [z4] tab (the [z2] tab in Basic Zone modes), select [Interval timer], then press <0>. [Enable]. 2 Select Select [Enable], then press the button. the shooting interval and 3 Set number of shots.
p Interval Timer Shooting Interval No. of shots [OK]. 4 Select The interval timer settings will be displayed on the menu screen. When you exit the menu,
will be displayed on the LCD panel. Interval timer the picture. 5 Take After taking the first shot, subsequent shots will be taken according to the interval timer settings. During interval timer shooting,
will blink. After the set number of shots are taken, the interval timer shooting will stop and be automatically canceled.
p Interval Timer Shooting Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. If the lens’s focus mode switch is set to , the camera will not shoot when focus is not achieved. Setting it to and focusing manually is recommended. Live View shooting, movie shooting, or bulb exposures cannot be performed with interval timer.
6 Flash Photography This chapter explains how to shoot with built-in flash and external Speedlites (EX-series, sold separately), how to set flash settings on the camera’s menu screen, and how to use the built-in flash for wireless flash shooting. Flash cannot be used with movie shooting. It will not fire. AEB cannot be used with flash.
D Using the Built-in Flash In Creative Zone modes, just press the button to raise the built-in flash for flash photography. Before shooting, check that [D] is displayed in the viewfinder. After shooting, push the built-in flash back down with your fingers until it clicks into place. In Basic Zone modes, depending on the shooting mode, you can set the built-in flash with Quick Control (p.107). The table below shows the shutter speed and aperture settings that will be used with flash.
D Using the Built-in Flash Effective Range of Built-in Flash (Approx. in meters / feet) EF-S18-135mm f/3.5-5.6 IS USM ISO Speed (p.148) ISO 100 Wide Angle Telephoto f/3.5 f/5.6 1 - 3.4 / 3.3 - 11.2 1 - 2.1 / 3.3 - 6.9 ISO 400 1 - 6.9 / 3.3 - 22.6 1 - 4.3 / 3.3 - 14.1 ISO 1600 1.7 - 13.7 / 5.6 - 44.9 1.1 - 8.6 / 3.6 - 28.2 ISO 6400 3.4 - 27.4 / 11.2 - 89.9 2.1 - 17.1 / 6.9 - 56.
D Using the Built-in Flash 3 Red-eye Reduction Using the red-eye reduction lamp before taking a flash picture can reduce red eye. 1 Select [Red-eye reduc.]. Under the [z1] tab, select [Red-eye reduc.], then press <0>. [Enable]. 2 Select For flash photography, when you press the shutter button halfway, the red-eye reduction lamp will be emitted.
D Using the Built-in Flash [y]. 2 Select Press the or keys to select [y*], then press <0>. The flash exposure compensation setting screen will appear. the flash exposure 3 Set compensation amount. To make the flash exposure brighter, turn the <5> or <6> dial to the right (increased exposure). To make it darker, turn the <5> or <6> dial to the left (decreased exposure). When you press the shutter button halfway, the icon will appear in the viewfinder.
D Using the Built-in Flash A FE LockN FE (flash exposure) lock obtains and locks the appropriate flash exposure for the desired part of the image. 1 Press the button. The built-in flash will be raised. Press the shutter button halfway and look in the viewfinder to check that the icon is lit. 2 Focus on the subject. the button (8). 3 Press Aim the viewfinder center over the subject where you want to lock the flash exposure, then press the button.
D Using an External Speedlite EOS-dedicated, EX-series Speedlites Using an EX-series Speedlite (sold separately) makes flash photography easy. For detailed instructions, refer to the EX-series Speedlite’s instruction manual. This camera is a Type-A camera that can use all the features of EX-series Speedlites. To set the flash functions and flash Custom Functions with the camera’s menu, see pages 235-243. Shoe-mount Speedlites Macro Lites Flash exposure compensation Set it with Quick Control (p.
D Using an External Speedlite Canon Speedlites Other Than the EX-series With an EZ/E/EG/ML/TL-series Speedlite set to A-TTL or TTL autoflash mode, the flash can be fired at full output only. Set the camera’s shooting mode to (manual exposure) or (aperture-priority AE) and adjust the aperture setting before shooting. When using a Speedlite that has manual flash mode, shoot in the manual flash mode.
3 Setting the FlashN With the built-in flash or an EX-series, external Speedlite compatible with flash function settings, you can use the camera’s menu screen to set flash functions and the external Speedlite’s Custom Functions. If you use an external Speedlite, attach the Speedlite to the camera and turn on the Speedlite before setting the flash functions. For details on the external Speedlite’s flash functions, refer to the Speedlite’s instruction manual. 1 Select [Flash control].
3 Setting the FlashN Flash Synchronization Speed in Av Mode You can set the flash-sync speed for flash photography in the aperture-priority AE mode. 4: Auto The flash sync speed is set automatically within a range of 1/250 sec. to 30 sec. to suit the scene’s brightness. High-speed sync is also possible. 6: 1/250-1/60 sec. auto Prevents a slow shutter speed from being set in low-light conditions. It is effective for preventing subject blur and camera shake.
3 Setting the FlashN Displaying the Flash Function Setting Screen Directly When you use the built-in flash or an external, EX-series Speedlite compatible with flash function settings, you can press the button to directly display the [Built-in flash settings] or [External flash func. setting] screen without first displaying the menu screen. With built-in flash Press the button twice. Press the button to raise the built-in flash.
3 Setting the FlashN Built-in Flash Settings Flash mode Normally, set this to [E-TTL II]. This enables autoexposure shooting with the built-in flash. To set the flash output level manually, select [Manual flash]. Select [2flash output], then set the flash output level to within 1/1 - 1/128 (1/3-stop increments) before shooting. Shutter synchronization Normally, set this to [1st curtain] so that the flash fires immediately after the exposure starts.
3 Setting the FlashN 2 Flash exposure compensation The same setting as step 3 in “Flash Exposure Compensation” on page 230 can be set. Wireless functions With wireless flash photography (via optical transmission), you can use the built-in flash to wirelessly control external Speedlites. For details, see “Wireless Flash Photography” on page 244.
3 Setting the FlashN External Flash Function Settings The screen display and setting options will vary depending on the external Speedlite model, current flash mode, Speedlite’s Custom Function settings, etc. For the functions compatible with your Speedlite (sold separately), refer to the Speedlite’s instruction manual.
3 Setting the FlashN Wireless functions / Flash ratio control Wireless (multiple) flash shooting is possible with radio or optical transmission. For details on wireless flash, refer to the instruction manual of a Speedlite compatible with wireless flash shooting. With a macro flash (MR-14EX II, etc.) compatible with flash function settings, you can set the flash ratio between flash tubes or flash heads A and B, or perform wireless flash with additional slave units.
3 Setting the FlashN Flash exposure compensation The same setting as step 3 in “Flash Exposure Compensation” on page 230 can be set. For details, refer to the Speedlite’s instruction manual. Flash exposure bracketing While the flash output is changed automatically, three shots are taken. For details, refer to the instruction manual of a Speedlite compatible with flash exposure bracketing. When using second-curtain synchronization, set the shutter speed to 1/25 sec. or slower.
3 Setting the FlashN External Speedlite Custom Function Settings For details on the external Speedlite’s Custom Functions, refer to the Speedlite’s instruction manual. 1 Select [External flash C.Fn setting]. the desired function. 2 Set Select the number, then press <0>. Select the setting, then press <0>. With an EX-series Speedlite, the Speedlite will always fire at full output if the [Flash metering mode] in Flash Custom Function is set to [TTL] (autoflash).
Wireless Flash PhotographyN The camera’s built-in flash can work as a master unit for Canon EXseries, external Speedlites having a wireless slave feature. It can wirelessly trigger the Speedlite(s) to fire via optical transmission. Be sure to read the instructions and cautions about wireless flash photography (optical transmission) in the Speedlite’s instruction manual. Slave Unit Settings and Position Regarding your Speedlite (slave unit), refer to its instruction manual and set it as follows.
Wireless Flash PhotographyN *1: If the slave Speedlite does not have a transmission channel setting function, the flash can work regardless of the camera’s channel setting. *2: In small rooms, the slave unit may work even if its wireless sensor does not face the camera. The camera’s wireless signals can bounce off the walls and be received by the slave unit. When using an EX-series Speedlite with fixed light-emitting unit (flash head) and wireless sensor, take pictures while making sure it can fire.
Wireless Flash PhotographyN Wireless Flash Photography Configurations The tables below show the possible configurations for wireless flash shooting. Select the configuration suiting the subject, shooting conditions, the number of external Speedlites you use, etc. External Speedlite Quantity Fully Automatic (E-TTL II autoflash) A:B Flash Ratio Setting Built-in Flash Page Wireless Functions Firing Group 1 All Single - - p.247 0 Single - Used p.249 0:3 - Multiple - - p.
Wireless Flash PhotographyN Fully Automatic Shooting with One External Speedlite This shows the most basic setup for fully-automatic wireless flash shooting with one external Speedlite. Steps 1 to 4 and 6 apply to all wireless flash shooting. Therefore, these steps are omitted in other wireless flash setups explained on the pages hereafter. On the menu screens, the <0> and <1> icons indicate the external Speedlite, and the <3> and <2> icons indicate the built-in flash.
Wireless Flash PhotographyN 4 Set [Flash mode: E-TTL II]. 5 Set [Wireless func.] to [0]. [Channel]. 6 Set Set the transmission channel (1-4) to the same one as the slave unit. 7 Set [Firing group] to [1All]. the picture. 8 Take Set the camera and take the picture in the same way as with normal flash shooting. To terminate wireless flash shooting, set [Wireless func.] to [Disable]. Setting [E-TTL II meter.] to [Evaluative] is recommended.
Wireless Flash PhotographyN Fully Automatic Shooting with One External Speedlite and Built-in Flash This is fully automatic wireless flash shooting with one external Speedlite and the built-in flash. You can change the flash ratio between the external Speedlite and built-in flash to adjust how the shadows cast on the subject. 1 Set [Wireless func.] to [0:3]. In step 5 on page 248, set [Wireless func.] to [0:3]. the desired flash ratio and 2 Set take the picture.
Wireless Flash PhotographyN Fully Automatic Shooting with Multiple External Speedlites Multiple Speedlite slave units can be fired as one flash unit or separated into slave groups for shooting with flash ratio control. The basic settings are shown below. By changing the [Firing group] setting, you can shoot with various wireless flash setups with multiple Speedlites. Basic settings: Flash mode : E-TTL II Wireless func.
Wireless Flash PhotographyN [1 (A:B)] Firing multiple slave units in multiple groups You can divide the slave units into groups A and B, and change the flash ratio to obtain the desired lighting effect. Refer to the Speedlite’s instruction manual and set one slave unit to firing group A and the other to firing group B. Position the Speedlites as shown in the A B illustration. 1 Set [Firing group] to [1(A:B)]. the A:B flash ratio and shoot. 2 Set Select [A:B fire ratio] and set the flash ratio.
Wireless Flash PhotographyN Fully Automatic Shooting with the Built-in Flash and Multiple External Speedlites The built-in flash can also be added to wireless flash shooting explained on pages 250-251. The basic settings are shown below. By changing the [Firing group] setting, you can shoot with various wireless flash setups of multiple Speedlites complemented with the built-in flash. 1 Basic settings: Flash mode : E-TTL II Wireless func. : 0+3 Channel : (Same as slave units) [Firing group].
Wireless Flash PhotographyN Creative Wireless Flash Shooting Flash exposure compensation When [Flash mode] is set to [E-TTL II], flash exposure compensation can be set. The flash exposure compensation settings (see below) that can be set vary depending on the [Wireless func.] and [Firing group] settings. Flash exposure compensation The set amount of flash exposure compensation will be applied to the built-in flash and all the external Speedlites. 2 exp. comp.
Wireless Flash PhotographyN Setting the Flash Output Manually for Wireless Flash Shooting When [Flash mode] is set to [Manual flash], flash exposure can be set manually. The flash output settings that can be set ([1 flash output], [Group A output], etc.) vary depending on the [Wireless func.] setting (see below). Wireless func.: 0 Firing group: 1All The manual flash output setting is applied to all the external Speedlites.
7 Shooting with the LCD Monitor (Live View Shooting) You can shoot while viewing the image on the camera’s LCD monitor. This is called “Live View shooting”. Live View shooting is enabled by setting the Live View shooting/ Movie shooting switch to . If you handhold the camera and shoot while viewing the LCD monitor, camera shake may cause blurred images. Using a tripod is recommended. Remote Live View Shooting With EOS Utility (EOS software, p.
A Shooting with the LCD Monitor 1 Set the Live View shooting/Movie shooting switch to . the Live View image. 2 Display Press the <0> button. The Live View image will appear on the LCD monitor. The Live View image will be displayed in the brightness level closely matching that of the actual image to be captured. on the subject. 3 Focus When you press the shutter button halfway, the camera will focus with the current AF method (p.276).
A Shooting with the LCD Monitor Enabling Live View Shooting Set [z5: Live View shoot.] (the [z3] tab in Basic Zone modes) to [Enable]. Number of Possible Shots with Live View Shooting Temperature Room Temperature (23°C / 73°F) (Approx. number of shots) Low Temperatures (0°C / 32°F) No Flash 340 310 50% Flash Use 300 270 The figures above are based on a fully-charged Battery Pack LP-E6N and CIPA (Camera & Imaging Products Association) testing standards.
A Shooting with the LCD Monitor Information Display Each time you press the button, the information display will change.
A Shooting with the LCD Monitor The histogram can be displayed by pressing the button when [z5: Expo. simulation: Enable] (p.271) is set. However, the histogram is not displayed while pressing the shutter button completely. You can display the electronic level by pressing the button (p.72). Note that if the AF method is set to [u+Tracking] or the camera is connected to a TV set with an HDMI cable, the electronic level cannot be displayed.
A Shooting with the LCD Monitor Scene Icons In the shooting mode, the camera will detect the scene type and set all the settings automatically to suit the scene. The detected scene type is indicated on the upper left of the screen. For certain scenes or shooting conditions, the icon displayed may not match the actual scene.
A Shooting with the LCD Monitor *5: Displayed with any of the lenses below: • EF-S18-55mm f/3.5-5.6 IS II • EF-S55-250mm f/4-5.6 IS II • EF300mm f/2.8L IS II USM • EF400mm f/2.8L IS II USM • EF500mm f/4L IS II USM • EF600mm f/4L IS II USM • Image Stabilizer lenses released in and after 2012. *4+*5: If the conditions in both *4 and *5 are met, the shutter speed will slow down.
A Shooting with the LCD Monitor B Button Display Options You can change what is displayed when the button is pressed during Live View shooting or movie shooting. 1 Select [zbutton LV display options]. Under the [53] tab, select [zbutton LV display options], then press <0>. Live View info switch setting 1 Select [Live View info switch setting]. a number. 2 Select The numbers represent the number of times to press the button.
A Shooting with the LCD Monitor the options. 3 Edit Select what you want to display and press <0> to add a checkmark [X]. For what you do not want to display, press <0> to remove the checkmark [X]. After completing the settings, select [OK]. Repeat steps 2 and 3 as necessary. Histogram display • Brightness/RGB You can switch the histogram display between [Brightness] and [RGB] (p.352). Set with [Brightness/RGB] in [Histogram disp]. • Display size You can change the display size of the histogram.
Shooting Function Settings f / R / i / DSettings When the Live View image is displayed, if you press the , , , or button, the setting screen will appear on the LCD monitor and you can turn the <6> or <5> dial to set the respective shooting function. With Live View shooting, you cannot set or for the drive mode. In addition, the continuous shooting settings set with viewfinder shooting will not be maintained with Live View shooting.
Shooting Function Settings Q Quick Control In Creative Zone modes, you can set the following: AF method, AF operation, Drive mode, Metering mode, Image quality, White balance, Picture Style, Auto Lighting Optimizer, and Creative filters. In Basic Zone modes, you can set the functions shown in the table on page 107 (except background blur) as well as the functions in bold above. 1 Press the button (7). The settable functions will be displayed. a function and set it.
U Applying Creative FiltersN While viewing the Live View image, you can apply one of seven filter effects (Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, Water painting effect, Toy camera effect, and Miniature effect) for shooting. The camera saves only the image with the Creative filter applied. You can also take a picture without a Creative filter, then apply an effect afterward and save it as a new image (p.399). the Mode Dial to a Creative 1 Turn Zone mode. the button (7).
U Applying Creative FiltersN the filter effect. 5 Adjust Press the button (except for c). Press the keys to adjust the filter effect, then press <0>. the picture. 6 Take The image is shot with the filter effct applied. When you set a Creative filter, single shooting will take effect even if the drive mode is set to or . You cannot shoot with Creative filters if the recording quality is RAW or RAW+JPEG, or if AEB, white balance bracketing, or Multi Shot Noise Reduction is set.
U Applying Creative FiltersN Creative Filter Characteristics G Grainy B/W Creates a grainy black-and-white photo. You can change the blackand-white effect by adjusting the contrast. W Soft focus Gives the image a soft look. You can change the degree of softness by adjusting the blur. X Fish-eye effect Gives the effect of a fish-eye lens. The image will have a barrel-type distortion. Depending on the level of this filter effect, the area trimmed along the periphery of the image changes.
U Applying Creative FiltersN H Toy camera effect Darkens the photo’s corners and applies a unique color tone that makes it look as if it was shot by a toy camera. You can change the color cast by adjusting the color tone. c Miniature effect Creates a diorama effect. You can change where the image looks sharp. In step 4, if you press the button (or tap [T] on the screen), you can switch between the white frame’s vertical and horizontal orientations.
3 Menu Function Settings z5 When the Live View shooting/Movie shooting switch is set to , menu options exclusive to the Live View shooting will appear under the [z5] and [z6] tabs (the [z3] tab in Basic Zone modes). The settable functions on this menu screen apply only to Live View shooting. They do not work with viewfinder shooting (settings are disabled). Live View shooting You can set Live View shooting to [Enable] or [Disable].
3 Menu Function Settings Exposure simulationN Exposure simulation simulates and displays how the brightness (exposure) of the actual image will look. • Enable (g) The displayed image brightness will be close to the actual brightness (exposure) of the resulting image. If you set exposure compensation, the image brightness will change accordingly. • During e (E/g) Normally, the image is displayed at the standard brightness to make the Live View image easy to see (E).
3 Menu Function Settings z6 N Silent LV shootingN • Mode 1 When shooting, you can suppress the mechanical sound more than with viewfinder shooting. Continuous shooting is also possible. If is set, you can shoot at a maximum continuous shooting speed of approx. 7.0 fps. • Mode 2 When the shutter button is pressed completely, only one shot will be taken. While you are holding down the shutter button, the camera operation will be suspended.
3 Menu Function Settings With the TS-E17mm f/4L or TS-E24mm f/3.5L II lens, you can use [Mode 1] or [Mode 2]. Metering timerN You can change how long the exposure setting is displayed (AE lock time). Selecting any of the following menu items will stop Live View shooting. To start Live View shooting again, press the <0> button. • [z3: Dust Delete Data], [53: Sensor cleaning], [54: Clear all camera settings], or [54: z firmware ver.].
Selecting the AF OperationN You can select the AF operation characteristics to suit the shooting conditions or subject. In Basic Zone modes, the optimum AF operation is set automatically for the respective shooting mode. 1 Press the button. the AF operation. 2 Select Press the keys to select the desired AF operation, then press <0>. X: One-Shot AF K: Servo AF If focus cannot be achieved, the AF point will turn orange.
Selecting the AF OperationN Servo AF for Moving Subjects This AF operation is suited for moving subjects. While you hold down the shutter button halfway, the camera will keep focusing on the subject continuously. If the drive mode is set to high-speed continuous shooting, the maximum speed will be approx. 5.0 fps. The pictures will be taken with priority given to the continuous shooting speed. If the drive mode is set to low-speed continuous shooting, the maximum speed will be approx. 3.0 fps.
Focusing with AF (AF Method) Selecting the AF Method You can select an AF method to suit the shooting conditions and your subject. The following AF methods are provided: [u(face)+Tracking] (p.277), [FlexiZone - Multi] (p.279), and [FlexiZone - Single] (p.281). If you want to achieve precise focus, set the lens’s focus mode switch to , magnify the image, and focus manually (p.288). 1 Press the button. the AF method. 2 Select Turn the <6> dial to select the AF method, then press <0>.
Focusing with AF (AF Method) u(face)+Tracking:c The camera detects and focuses on human faces. If a face moves, the AF point
also moves to track the face. 1 Display the Live View image. Press the <0> button. The Live View image will appear on the LCD monitor. the AF point. 2 Check When a face is detected, the area Area frame frame and the
frame will appear on the face for focusing. If multiple faces are detected, will be displayed.
Focusing with AF (AF Method) Focusing on a subject other than a human face Press <0> or and the AF frame will appear at the screen’s center. Then use <9> to move the AF frame over the desired subject. Once the AF frame achieves focus, it will track the subject even if the subject moves or if you change the composition. If the subject’s face is significantly out of focus, face detection will not be possible. Adjust the focus manually (p.
Focusing with AF (AF Method) FlexiZone - Multi: o You can use up to 35 AF points for wide-area focusing (automatic selection). This wide area can also be divided into 9 zones for focusing (zone selection). 1 Display the Live View image. Press the <0> button. The Live View image will appear on the LCD monitor. Area frame the AF point.O 2 Select Pressing <0> or the button will toggle between automatic selection and zone selection. In Basic Zone modes, automatic selection is set automatically.
Focusing with AF (AF Method) on the subject. 3 Focus Aim the AF point over the subject and press the shutter button halfway. When focus is achieved, the AF point will turn green and the beeper will sound. If focus is not achieved, the area frame will turn orange. the picture. 4 Take Check the focus and exposure, then press the shutter button completely to take the picture (p.256).
Focusing with AF (AF Method) FlexiZone - Single: d The camera focuses with a single AF point. This is effective when you want to focus on a particular subject. 1 AF point Display the Live View image. Press the <0> button. The Live View image will appear on the LCD monitor. The AF point < > will appear. During movie shooting, if [Movie Servo AF] is set to [Enable], the AF point will be displayed in a larger size. the AF point. 2 Move Use <9> to move the AF point to where you want to focus.
Focusing with AF (AF Method) the picture. 4 Take Check the focus and exposure, then press the shutter button completely to take the picture (p.256).
Focusing with AF (AF Method) Notes for AF AF Operation Even when focus is achieved, pressing the shutter button halfway will focus again. The image brightness may change during and after the AF operation. Depending on the subject or shooting conditions, etc., focusing may take longer or the continuous shooting speed may become slower. If the light source changes while the Live View image is displayed, the screen may flicker and focusing may be difficult.
Focusing with AF (AF Method) Shooting Conditions that Make Focusing Difficult Low-contrast subjects such as the blue sky, solid-color flat surfaces or when highlight or shadow details are lost. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Subjects with repetitive patterns (Example: Skyscraper windows, computer keyboards, etc.). Fine lines and subject outlines. Under a light source whose brightness, color, or pattern keeps changing.
Focusing with AF (AF Method) If focus is not achieved with the shooting conditions listed on the preceding page, set the lens’s focus mode switch to and focus manually. Depending on the lens used, focusing may take longer or correct focus may not be achieved. For details, refer to the Canon website. If you shoot a peripheral subject and it is slightly out of focus, aim the center AF point or zone over the subject to focus, focus again and then take the picture.
x Shooting with the Touch Shutter Just by tapping on the LCD monitor screen, you can focus and take the picture automatically. This works in all shooting modes. 1 Display the Live View image. Press the <0> button. The Live View image will appear on the LCD monitor. the touch shutter. 2 Enable Tap [y] on the screen’s bottom left. Each time you tap on the icon, it will toggle between [y] and [x]. [x] (Touch shutter: Enable) You can tap on the spot to focus and shoot.
x Shooting with the Touch Shutter Even if you set the drive mode to or , the camera will still shoot in single shooting mode. When you tap on the screen, focusing will be performed with One-Shot AF regardless of the [x: Touch shutter] or [AF operation] settings. The touch shutter does not work with the magnified view. If the Fish-eye effect Creative filter is set, the camera will focus using the AF point at the center of the screen regardless of the point you tap on.
MF: Focusing Manually You can magnify the image and focus precisely with manual focus. 1 Set the lens’s focus mode switch to . Turn the lens focusing ring to focus roughly. the magnifying frame. 2 Display Press the button. The magnifying frame will appear. You can also tap [1] on the screen to magnify the image. Magnifying frame the magnifying frame. 3 Move Use <9> to move the magnifying frame to the position where you want to focus. You can also tap it to move it.
MF: Focusing Manually manually. 5 Focus While looking at the magnified image, turn the lens focusing ring to focus. After achieving focus, press the button to return to the normal view. the picture. 6 Take Check the exposure, then press the shutter button completely to take the picture (p.256). In magnified view, the exposure is locked. (Shutter speed and aperture will be displayed in red.
General Live View Shooting Cautions Image Quality When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable. Shooting in high temperatures may cause noise and irregular colors in the image. If Live View shooting is used continuously for a prolonged period, the camera’s internal temperature may rise, and image quality may deteriorate. Always exit Live View shooting when you are not shooting.
General Live View Shooting Cautions Live View Image Under low- or bright-light conditions, the Live View image may not reflect the brightness of the captured image. Even if a low ISO speed is set, noise may be noticeable in the displayed Live View image under low light. However, when you shoot, the image recorded will have less noise. (The image quality of the Live View image is different from that of the recorded image.
8 Shooting Movies Movie shooting is enabled by setting the Live View shooting/ Movie shooting switch to . For cards that can record movies, see page 5. If you handhold the camera and shoot movies, camera shake can cause blurred movies. Using a tripod is recommended in such cases. Full HD 1080 Full HD 1080 indicates compatibility with HighDefinition featuring 1080 vertical pixels (scanning lines).
k Shooting Movies Autoexposure Shooting Autoexposure control will take effect to suit the scene’s current brightness. the Mode Dial to a mode other 1 Set than and . the Live View shooting/Movie 2 Set shooting switch to . The reflex mirror will make a sound, then the image will appear on the LCD monitor. on the subject. 3 Focus Before shooting a movie, focus with AF or manual focus (p.276-285, 288). When you press the shutter button halfway, the camera will focus with the current AF method.
k Shooting Movies In Basic Zone modes, the shooting result will be the same as with . Also, the scene icon for the scene detected by the camera is displayed on the upper left (p.297). In the , , and shooting modes, the settings will be the same as when shooting in the mode. Settable menu functions differ between Basic Zone modes and Creative Zone modes (p.477). In Creative Zone modes, you can press the button (p.203) to lock the exposure (AE lock).
k Shooting Movies ISO Speed in Basic Zone Modes The ISO speed will be set automatically within ISO 100 - ISO 12800. ISO Speed in the d, s, f, and F Modes The ISO speed will be set automatically within ISO 100 - ISO 12800. In [Range for movies] under [z2: ISO speed settings], if you set [Maximum] to [H(25600)], the automatic setting range will be expanded to H (equivalent to ISO 25600).
k Shooting Movies Scene Icons During movie shooting in a Basic Zone mode (except the mode), an icon representing the scene detected by the camera will be displayed, and the shooting will be performed to suit the scene. For certain scenes or shooting conditions, the icon displayed may not match the actual scene.
k Shooting Movies Manual Exposure Shooting You can manually set the shutter speed, aperture, and ISO speed for movie shooting. Using manual exposure to shoot movies is for advanced users. 1 Set the Mode Dial to . the Live View shooting/Movie 2 Set shooting switch to . the ISO speed. 3 Set Press the button. The ISO speed setting screen will appear on the LCD monitor. Turn the <6> dial to set the ISO speed. For details on the ISO speed, see the next page.
k Shooting Movies ISO Speed During Manual Exposure Shooting With [Auto] (A), the ISO speed will be set automatically within ISO 100 - ISO 12800. In [Range for movies] under [z2: ISO speed settings], if you set [Maximum] to [H(25600)], the automatic setting range will be expanded to H (equivalent to ISO 25600). Even if you set [Minimum] to ISO 200 or higher and [Maximum] to ISO 3200 or lower, the range will be set within ISO 100 - ISO 6400 automatically (p.332).
k Shooting Movies Information Display Each time you press the button, the information display will change.
k Shooting Movies You can display the electronic level by pressing the button (p.72). You can edit what to display when the button is pressed (p.262). Note that if the AF method is set to [u +Tracking] or the camera is connected to a TV set with an HDMI cable (p.373), the electronic level cannot be displayed. The electronic level, grid lines, or histogram cannot be displayed during movie shooting. (The display will disappear when you start shooting a movie.
k Shooting Movies Still Photo Shooting Still photo shooting is not possible during movie shooting. To shoot still photos, stop shooting the movie and perform viewfinder shooting or Live View shooting. Cautions for Movie Shooting Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components.
k Shooting Movies Notes for Movie Shooting Movie-related settings are under the [z4] and [z5] tabs (p.326). (In Basic Zone modes, they are under the [z2] and [z3] tabs.) A movie file is recorded each time you shoot a movie. If the file size exceeds 4 GB, a new file will be created for every subsequent 4 GB (p.309). The movie image’s field of view is approx. 100% (with movie recording size set to [1920x1080]). You can also focus on the image by pressing the
button.
Shooting Function Settings f / i Settings If you press the button while the image is displayed on the LCD monitor, the setting screen will appear on the LCD monitor and you can turn the <6> dial to set the AF method. During manual exposure shooting (p.298), you can press the button to set the ISO speed. drive mode and metering mode cannot be set.
Shooting Function Settings Q Quick Control In Creative Zone modes, the AF method, Movie recording size, Digital zoom, Recording level (set manually only), Volume (headphones), White balance, Picture Style, Auto Lighting Optimizer, Creative filters, and Video snapshot can be set. In Basic Zone modes, only the functions in bold above can be set. 1 Press the button (7). The settable selected function will be displayed. [HDR Movie Shooting] is settable only in Basic Zone modes (p.314).
3 Setting the Movie Recording Size With [z4: Movie rec quality] (the [z2] tab in Basic Zone modes), you can set the movie recording format, movie recording size (image size, frame rate, and compression method), and other functions. MOV/MP4 You can select the movie’s recording format. D MOV The movie is recorded in the MOV format (file extension: “.MOV”). Convenient for editing with a computer. C MP4 The movie is recorded in the MP4 format (file extension: “.MP4”).
3 Setting the Movie Recording Size Movie Recording Size You can select the movie’s size, frame rate, and compression method. Image Size L 1920x1080 Full High-Definition (Full HD) recording quality. The aspect ratio is 16:9. w 1280x720 High-Definition (HD) recording quality. The aspect ratio is 16:9. Frame Rate (fps: frames per second) 6 29.97 fps/8 59.94 fps For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.). 5 25.00 fps/7 50.
3 Setting the Movie Recording Size Compression Method Fixed at W if the recording format is MOV. For the MP4 format, X or Xv can be selected. • In MOV Format W ALL-I (For editing/I-only) Compresses one frame at a time for recording. Although the file size is larger than with IPB (Standard) and IPB (Light), the movie is better suited for editing. • In MP4 Format X IPB (Standard) Compresses multiple frames at a time efficiently for recording.
3 Setting the Movie Recording Size Total Movie Recording Time and File Size Per Minute In MOV Format Movie Recording Quality L 654 W (Approx.) Total Recording Time on Card 4 GB 16 GB 5 min. 23 min. 64 GB 1 hr. 33 min. 654 MB/min. In MP4 Format Movie Recording Quality File Size (Approx.) Total Recording Time on Card 4 GB File Size 16 GB 64 GB 35 min. 2 hr. 21 min. 431 MB/min. 1 hr. 10 min. 4 hr. 41 min. 216 MB/min. 87 X 8 min. L 654 X 17 min. 65 Xv 43 min. 2 hr. 53 min.
3 Setting the Movie Recording Size Movie Shooting Time Limit The maximum recording time of one movie clip is 29 min. 59 sec. If the movie shooting time reaches 29 min. 59 sec., the movie shooting will stop automatically. You can start shooting a movie again by pressing the <0> button. (The movie will be recorded as a new movie file.
3 Using Movie Digital Zoom When the recording size is L6/4 (NTSC) or L5 (PAL), you can shoot with an approx. 3x to 10x digital zoom (except in mode). 1 Select [Digital zoom]. Under the [z4] tab (the [z2] tab in Basic Zone modes), select [Digital zoom] and press <0>. [Approx. 3-10x zoom]. 2 Select Select [Approx. 3-10x zoom], then press <0>. Press the button to exit the menu and return to movie shooting. digital zoom. 3 Use Press the keys. The digital zoom bar will appear.
3 Setting the Sound Recording You can shoot movies while recording sound with the built-in stereo microphones or a commercially-available external stereo microphone. You can also freely adjust the sound-recording level. Set the sound recording with [z4: Sound recording]. Sound Recording/Sound-Recording Level [Auto] : The sound-recording level is adjusted automatically. Auto level control will operate automatically in response to the sound level. [Manual] : For advanced users.
3 Setting the Sound Recording Using Microphones Normally, the built-in microphones will record stereo sound. Stereo sound recording is also possible by connecting a commercially-available external stereo microphone equipped with a miniature stereo plug (3.5 mm) to the camera’s external microphone IN terminal (p.26). Using Headphones By connecting stereo headphones (commercially-available) equipped with a 3.5 mm diameter mini plug to the camera’s headphone terminal (p.
Shooting HDR Movies You can shoot movies by reducing the clipped highlight details of bright areas even in high-contrast scenes. This function is settable in Basic Zone modes (except the mode). HDR movie can be set when the MP4 format is set and the recording size is L6X (NTSC) or L5X (PAL). 1 Set the Mode Dial to a Basic Zone mode. the button (7). 2 Press The Quick Control screen will appear. [4]. 3 Select Press the keys to select [4] (HDR Movie Shooting) on the screen’s right side.
Shooting HDR Movies Since multiple frames are merged to create an HDR movie, a part of the movie may be distorted. During shooting while handholding the camera, the distortion caused by camera shake may be more noticeable. Using a tripod is recommended. Note that even if a tripod is used for shooting, afterimages may be noticeable or noise may look increased when the HDR movie is played back frame-by-frame or in slow-motion compared to normal playback.
v Shooting Movies with Creative Filters In the (Creative filters) mode, you can shoot movies with one of five filter effects (Memory, Dream, Old Movies, Dramatic B&W, and Miniature effect movie). The recording size can be set to L6/4 (NTSC) or L5 (PAL). 1 Set the Mode Dial to . the button (7). 2 Press The Quick Control screen will appear. [l]. 3 Select Press the keys to select [l] (Creative filters) on the upper left of the screen, then press <0>. a filter effect.
v Shooting Movies with Creative Filters the filter effect level. 5 Adjust Press the Q button and select the icon below [Creative filters]. Press the keys to adjust the filter effect, then press <0>. When the Miniature effect movie is set, select the playback speed. 6 Shoot the movie. Magnified view is not possible. The histogram is not displayed. It is not possible to set movie digital zoom, video snapshot, or time-lapse movie.
v Shooting Movies with Creative Filters n Dramatic B&W Creates an atmosphere of dramatic realism with high-contrast black and white. You can adjust the graininess and black-and-white effect. o Miniature effect movie You can shoot movies having a Miniature (diorama) effect. Select the playback speed and shoot. You can change where the image looks sharp.
N Shooting Time-lapse Movies Still photos shot at a set interval can be stitched together automatically to create a time-lapse movie. A time-lapse movie shows how a subject changes in a much shorter period of time than the actual time it took. It is effective for a fixed-point observation of changing scenery, growing plants, celestial motion, etc. Time-lapse movies are recorded in the MOV format and in L6W (NTSC) or L5W (PAL) recording size. the Mode Dial to a mode other 1 Set than . [Time-lapse movie].
N Shooting Time-lapse Movies the shooting interval and 4 Set number of shots. Time required Playback time Check the [k: Time required] and [3: Playback time] displayed at the bottom of the screen to set the shooting interval and number of shots. Select the number to be set (hours: minutes: seconds / number of shots). Press <0> so is displayed. Set the desired number, then press <0>. (Returns to .) Shooting interval Settable from [00:00:01] to [99:59:59].
N Shooting Time-lapse Movies Card- time left The total length of a time-lapse movie that can be recorded on the card based on its remaining capacity. the menu. 7 Exit Press the button to turn off the menu screen. the message. 8 Read Read the message and select [OK]. test shots. 9 Take Set the exposure and shooting functions, and press the shutter button halfway to focus as you do with Live View shooting. Press the shutter button completely to start taking test shots.
N Shooting Time-lapse Movies the time-lapse movie. 11 Shoot Press the shutter button halfway to Shots remaining Time-lapse movie check the focus and exposure. Press the shutter button completely to start shooting the time-lapse movie. AF will not work during time-lapse movie shooting. The exposure setting for the first shot will be applied to subsequent shots. During time-lapse movie shooting, nothing will be displayed on the LCD monitor. will blink on the LCD panel.
N Shooting Time-lapse Movies With time-lapse movie set to [Enable], you cannot set [z4: Movie rec quality] and [53: Video system]. Cannot be set when movie digital zoom is set. If the camera is connected to a computer with the interface cable, or if an HDMI cable is connected to the camera, you cannot select [Enable]. The maximum ISO speed will be ISO 6400 in the , , , and modes, and in the mode with ISO Auto set.
N Shooting Time-lapse Movies If the time it takes to record to the card exceeds the interval between shots due to the shooting functions set or card performance, shooting with the set interval may not be performed. The captured images are not recorded as still photos. Even if you cancel the time-lapse movie shooting after only one shot is taken, it will be recorded as a movie file. If the card does not have enough free space to record the set number of shots, [Playback time] will be displayed in red.
N Shooting Time-lapse Movies You can perform time-lapse movie shooting with a fully-charged Battery Pack LP-E6N for the approximate durations (from start of shooting until the battery is exhausted) listed in the table below. Possible time for time-lapse movie shooting will vary depending on the shooting conditions. Approximate Total Possible Time for Time-lapse Movie Shooting (Approx.) Room Temperature Low Temperatures (23°C / 73°F) (0°C / 32°F) Shooting interval: 1 sec. 3 hr. 50 min. 3 hr. 20 min.
3 Menu Function Settings z4 When the Live View shooting/Movie shooting switch is set to , the movie shooting menu options will appear under the [z4] and [z5] tabs (the [z2] and [z3] tabs in Basic Zone modes). Movie Servo AF With this function enabled, the camera focuses on the subject continuously during movie shooting. The default setting is [Enable]. When [Enable] is set: • The camera focuses on the subject continuously even when you are not pressing the shutter button halfway.
3 Menu Function Settings AF method The AF methods are the same as described on pages 276-285. You can select [u+Tracking], [FlexiZone - Multi], or [FlexiZone Single]. Cautions When [Movie Servo AF] is Set to [Enable] Shooting Conditions that Make Focusing Difficult • A fast-moving subject approaching or moving away from the camera. • A subject moving at a close distance in front of the camera. • Also see “Shooting Conditions that Make Focusing Difficult” on page 284.
3 Menu Function Settings Movie recording quality You can set the movie recording format (MOV or MP4) and movie recording size. For details, see page 306. Digital zoom You can use digital zoom for telephoto shooting. For details, see page 311. Sound recording You can set the sound-recording functions. For details, see page 312.
3 Menu Function Settings Movie Servo AF speedO You can set the Movie Servo AF’s AF speed and its operation conditions. This function is settable when [Movie Servo AF] is set to [Enable] and [AF method] is set to [FlexiZone - Single]. Additionally, the function is enabled when using a lens supporting slow focus transition during movie shooting*. When active : [Always on] sets the AF adjustment speed to take effect at all times for movie shooting (before and during movie shooting).
3 Menu Function Settings Movie Servo AF tracking sensitivityO You can change the Movie Servo AF’s tracking sensitivity to one of seven levels. This affects the responsiveness of AF tracking sensitivity when the AF points stray from the subject, such as during panning or when an obstacle cuts across the AF points. This function is settable when [Movie Servo AF] is set to [Enable] and [AF method] is set to [FlexiZone - Single].
3 Menu Function Settings z5 Metering timerO You can change how long the exposure setting is displayed (AE lock time). Grid display With [3x3 l] or [6x4 m], you can display grid lines to help you level the camera vertically or horizontally. Also, with [3x3+diag n], the grid is displayed together with diagonal lines to help you compose with better balance by aligning the intersections over the subject.
3 Menu Function Settings Video snapshot You can shoot video snapshots. For details, see page 333. Time-lapse movie You can shoot time-lapse movies. For details, see page 319. Remote control shooting When [Enable] is set, you can start or stop movie shooting using Remote Controller RC-6 (sold separately, p.221). [R] will be displayed on the LCD panel. Set the release mode switch to <2>, then press the transmit button.
3 Shooting Video Snapshots You can shoot a series of short movie clips lasting approx. 2 sec., 4 sec., or 8 sec. called video snapshots. The video snapshots can be joined together into a single movie called a video snapshot album. You can thereby show quick highlights of a trip or event. A video snapshot album can also be played back together with background music (p.340, 372).
3 Shooting Video Snapshots 4 Select [Album settings]. 5 Select [Create a new album]. the snapshot length. 6 Select Press <0> and use the keys to select the snapshot’s length, then press <0>. [OK]. 7 Select Press the button to exit the Shooting duration 334 menu. A blue bar will appear to indicate the snapshot length. Go to “Creating a Video Snapshot Album” (p.335).
3 Shooting Video Snapshots Creating a Video Snapshot Album the first video snapshot. 8 Shoot Press the <0> button, then shoot. The blue bar indicating the shooting duration will gradually decrease. After the set shooting duration elapses, the shooting stops automatically. The confirmation screen will appear (p.336-337). as a video snapshot album. 9 Save Select [J Save as album], then press <0>. The movie clip will be saved as the video snapshot album’s first video snapshot.
3 Shooting Video Snapshots Options in Steps 9 and 10 Function Description J Save as album (Step 9) The movie clip will be saved as the video snapshot album’s first video snapshot. J Add to album (Step 10) The video snapshot just recorded will be added to the album recorded immediately before. W Save as a new album (Step 10) A new video snapshot album is created and the movie clip is saved as the first video snapshot. The new album will be a different file from the previously recorded album.
3 Shooting Video Snapshots [Playback video snapshot] Operations in Steps 9 and 10 Function Playback Description 7 Play By pressing <0>, you can play back or pause the video snapshot recorded immediately before. 5 First frame Displays the first scene of the album’s first video snapshot. P Skip backward* Each time you press <0>, the video snapshot skips back by a few seconds. 3 Previous frame Each time you press <0>, the previous frame is displayed. If you hold down <0>, it will rewind the movie.
3 Shooting Video Snapshots Adding to an Existing Album 1 Select [Add to existing album]. Follow step 5 on page 334 to select [Add to existing album], then press <0>. an existing album. 2 Select Turn the <5> dial to select an existing album, then press <0>. Select [OK], then press <0>. Certain video snapshot settings will change to match the existing album’s settings. Press the button to exit the menu. The video snapshot shooting screen will appear. the video snapshot.
3 Shooting Video Snapshots Cautions for Shooting Video Snapshots When the MOV format is selected, video snapshot cannot be set. You can add to an album only video snapshots with the same duration (approx. 2 sec., 4 sec., or 8 sec. each). Note that if you do any of the following while shooting video snapshots, a new album will be created for subsequent video snapshots. • Changing the [Movie rec. size]. • Changing the [Sound rec.
3 Shooting Video Snapshots Playing back an Album You can play back a video snapshot album in the same way as a normal movie (p.365). 1 Play back the movie. Press the button to display an image. the album. 2 Select In the single-image display, the [st] icon displayed on the upper left of the screen indicates a video snapshot album. Turn the <5> dial to select an album. back the album. 3 Play Press <0>. On the movie playback panel displayed, select [7] (Play), then press <0>.
3 Shooting Video Snapshots Editing an Album After shooting, you can rearrange, delete, or play back the video snapshots in the album. 1 Select [X]. On the movie playback panel displayed, select [X] (Edit), then press <0>. The editing screen will be displayed. an editing operation. 2 Select Select an editing option, then press <0>. Function Description T Move snapshot Press the keys to select the video snapshot you want to move, then press <0>.
3 Shooting Video Snapshots the edited album. 3 Save Press the button to return to the Editing panel at the screen’s bottom. Select [W] (Save), then press <0>. The save screen will appear. To save it as a new album, select [New file]. To save it and overwrite the original album, select [Overwrite], then press <0>. If the card does not have enough free space, [New file] will not be available. When the battery level is low, editing albums is not possible. Use a fullycharged battery.
General Movie Shooting Cautions Red Internal Temperature Warning Icon If the camera’s internal temperature increases due to prolonged movie shooting or under a high ambient temperature, a red icon will appear. The red icon indicates that movie shooting will soon be terminated automatically. If this happens, you will not be able to shoot again until the camera’s internal temperature decreases. Turn off the power and let the camera rest for a while.
General Movie Shooting Cautions Recording and Image Quality If you use a card with a slow writing speed, a five-level indicator may appear on the right of the screen during movie shooting. It indicates how much data has not yet been written to the card (remaining capacity of the internal buffer memory). The slower the card, the faster the indicator will climb upward. If the indicator becomes full, movie shooting Indicator will stop automatically.
9 Image Playback This chapter explains how to play back and erase photos and movies, how to display them on a TV screen, and other playback-related functions. Images shot and saved with another device The camera may not be able to properly display images captured with a different camera, edited with a computer, or that have had their file names changed.
x Image Playback Single-Image Display 1 Play back the image. Press the button. The last image captured or played back will appear. an image. 2 Select To play back images starting with the last image captured, turn the <5> dial counterclockwise. To play back images starting with the first captured image, turn the dial clockwise. Each time you press the button, the information display will change.
x Image Playback the image playback. 3 Exit Press the button to exit the image playback and return to shooting-ready state. Shooting Information Display With the shooting information screen displayed (p.346), you can press the keys to change the shooting information displayed at the screen’s bottom as follows. For details, see pages 349-350.
B: Shooting Information Display The information displayed varies depending on the shooting mode and settings.
B: Shooting Information Display Shooting information display • Detailed information Exposure compensation amount Histogram (Brightness/RGB) Shooting date and time Aperture Shutter speed ISO speed Shooting mode Scroll bar Highlight tone priority Metering mode White balance File size Auto Lighting Optimizer White balance correction Flash exposure compensation amount / Multi Shot Noise Reduction Image-recording quality Picture Style/Settings AF Microadjustment * When you shoot in RAW+JPEG image
B: Shooting Information Display • Lens/Histogram information Histogram display (Brightness) Lens name Focal length Histogram display (RGB) • White balance information • Picture Style information 1 • Picture Style information 2 • Color space / Noise reduction information • Lens aberration correction information If you used GPS Receiver GP-E2 to record GPS information for the image, the “GPS information” screen will also appear.
B: Shooting Information Display Sample Movie Information Display Playback Aperture Shutter speed Movie shooting mode/ Time-lapse movie Creative filters Recording format Movie recording size Frame rate Movie file size Shooting time, Playback time Compression method * If manual exposure is used, the shutter speed, aperture, and ISO speed (when set manually) will be displayed. * The icon will be displayed for video snapshots. * The icon will be displayed for HDR movies.
B: Shooting Information Display AF Point Display When [33: AF point disp.] is set to [Enable], the AF point that has achieved focus will be displayed in red. If automatic AF point selection is set, multiple AF points may be displayed at the same time. Histogram The brightness histogram shows the exposure level distribution and overall brightness. The RGB histogram is for checking the color saturation and gradation. The display can be switched with [33: Histogram disp].
x Searching for Images Quickly H Displaying Multiple Images on One Screen (Index Display) Search for images quickly with the index display showing 4, 9, 36, or 100 images on one screen. 1 Switch to the index display. During image playback, press the button. The 4-image index display will appear. The selected image is highlighted with an orange frame. Pressing the button will switch the display as follows: 9 images 9 36 images 9 100 images.
x Searching for Images Quickly I Jumping through Images (Jump Display) In the single-image display, you can turn the <6> dial to jump through the images forward or backward according to the jump method set. 1 Select [Image jump w/6]. Under the [32] tab, select [Image jump w/6], then press <0>. the jump method. 2 Select Select the jump method, then press <0>.
u/y Magnified View You can magnify a captured image by approx. 1.5x to 10x on the LCD monitor. 1 Magnify the image. Press the button during image playback. The image will be magnified. If you hold down the button, the image will be magnified until it reaches the maximum magnification. Press the button to reduce the magnification. If you hold down the button, the magnification will be reduced to the single-image display. Magnified area position around the image.
d Playing Back with the Touch Screen The LCD monitor is a touch-sensitive panel that you can touch with your fingers for various playback operations. First, press the button to play back images. Browsing Images Swipe with one finger. With single-image display, touch the LCD monitor with one finger. You can browse to the next or previous image by swiping your finger to the left or right. Swipe to the left to see the next (newer) image, or swipe to the right to see the previous (older) image.
d Playing Back with the Touch Screen Reducing Image (Index Display) Pinch two fingers. Touch the screen with two fingers spread apart, and pinch your fingers together on the screen. Each time you pinch your fingers, the single-image display will change to the index display. If you spread your fingers, the image display will change in the reverse order. When you select an image, the orange frame will appear. Tap on the image again to display it as a single image.
b Rotating the Image You can rotate the displayed image to the desired orientation. 1 Select [Rotate image]. Under the [31] tab, select [Rotate image], then press <0>. an image. 2 Select Turn the <5> dial to select the image to be rotated. You can also select an image in the index display (p.353). the image. 3 Rotate Each time you press <0>, the image will rotate clockwise as follows: 90° 9 270° 9 0°. To rotate another image, repeat steps 2 and 3. If you set [51: Auto rotate] to [OnzD] (p.
3 Setting Ratings You can rate images (still photos and movies) with one of five rating marks: l/m/n/o/p. This function is called rating. 1 Select [Rating]. Under the [32] tab, select [Rating], then press <0>. an image. 2 Select Turn the <5> dial to select an image or movie to be rated, then press <0>. By pressing the button, you can select images from a three-image display. To return to the single-image display, press the button. the rating.
3 Setting Ratings A total of up to 999 images of a given rating can be displayed. If there are more than 999 images with a given rating, [###] will be displayed. Taking Advantage of Ratings With [32: Image jump w/6], you can display only images having the specified rating. With [32: Slide show], you can play back only images having the specified rating.
Q Quick Control for Playback During playback, you can press the button to set the following: [J: Protect images], [b: Rotate image], [9: Rating], [R: RAW image processing], [U: Creative filters], [S: Resize (JPEG images only)], [N: Cropping (JPEG images only)], [1: Highlight alert], [T: AF point display], [e: Image jump w/6], and [q: Send images to smartphone*]. For movies, only the functions in bold above can be set.
Q Quick Control for Playback the setting. 3 Exit Press the button to exit the Quick Control screen. To rotate an image, set [51: Auto rotate] to [OnzD]. If [51: Auto rotate] is set to [OnD] or [Off], the [b Rotate image] setting will be recorded to the image, but the camera will not rotate the image for display. Pressing the button during the index display will switch to the single-image display and the Quick Control screen will appear.
k Enjoying Movies You can play back movies in the following three ways: Playback on a TV Set (p.373) By connecting the camera to a TV set with HDMI Cable HTC-100, you can play back the camera’s movies and still photos on the TV set. Since hard disk recorders do not have an HDMI IN terminal, the camera cannot be connected to a hard disk recorder with an HDMI cable. Even if the camera is connected to a hard disk recorder with a USB cable, movies and still photos cannot be played back or saved.
k Enjoying Movies Playback and Editing with a Computer The movie files recorded on the card can be transferred to a computer and played back or edited with pre-installed or general-purpose software compatible with the movie’s recording format. To play back or edit a movie with commercially-available software, use software compatible with MOV-format and MP4-format movies. For details on commercially-available software, contact the software manufacturer.
k Playing Back Movies 1 Play back the image. Press the button to display an image. a movie. 2 Select Turn the <5> dial to select the movie to be played back. In the single-image display, the icon displayed on the upper left of the screen indicates a movie. If the movie is a video snapshot, will be displayed. In the index display, perforations at the left edge of a thumbnail indicate a movie.
k Playing Back Movies Movie Playback Panel Operation Playback Description 7 Play Pressing <0> toggles between play and stop. 8 Slow motion Adjust the slow motion speed by pressing the keys. The slow motion speed is indicated on the upper right of the screen. 5 First frame Displays the movie’s first frame. 3 Previous frame Each time you press <0>, the previous frame is displayed. If you hold down <0>, it will rewind the movie.
X Editing a Movie’s First and Last Scenes Playback with the Touch Screen Tap [7] on the center of the screen. The movie will start playing back. To display the movie playback panel, tap on the upper left of the screen. To pause the movie while it is playing back, tap on the screen. The movie playback panel will also appear. X Editing a Movie’s First and Last Scenes You can edit out the first and last scenes of a movie in approx. 1-sec. increments. 1 On the movie playback screen, select [X].
X Editing a Movie’s First and Last Scenes the edited movie. 3 Check Select [7] and press <0> to play back the edited movie. To change the editing, go back to step 2. To cancel the editing, press the button, then select [OK] on the confirmation dialog. the edited movie. 4 Save Select [W], then press <0>. The save screen will appear. To save it as a new movie, select [New file]. To save it and overwrite the original movie file, select [Overwrite], then press <0>.
3 Slide Show (Auto Playback) You can play back the images on the card as an automatic slide show. 1 Number of images to be played back Select [Slide show]. Under the [32] tab, select [Slide show], then press <0>. the images to be played 2 Select back. Press the keys to select the desired option, then press <0>. All images/Movies/Stills Press the keys to select one of the following: [jAll images] [kMovies] [zStills]. Then press <0>.
3 Slide Show (Auto Playback) Item Playback Description jAll images All the still photos and movies on the card will be played back. iDate Still photos and movies taken on the selected shooting date will be played back. nFolder Still photos and movies in the selected folder will be played back. kMovies Only the movies on the card will be played back. zStills Only the still photos on the card will be played back.
3 Slide Show (Auto Playback) [Transition effect] [Background music] the slide show. 4 Start Press the keys to select [Start], then press <0>. After [Loading image...] is displayed, the slide show will start. the slide show. 5 Exit To exit the slide show and return to the setting screen, press the button. To pause the slide show, press <0>. During pause, [G] will be displayed on the upper left of the image. Press <0> again to resume the slide show.
3 Slide Show (Auto Playback) Selecting the Background Music After you use EOS Utility (EOS software) to copy background music to the card, you can play background music together with the slide show. 1 Select [Background music]. Set [Background music] to [On], then press <0>. If the card has no background music, you cannot perform step 2. the background music. 2 Select Press the keys to select the desired background music, then press <0>.
Viewing Images on a TV Set By connecting the camera to a TV set with an HDMI cable, you can play the camera’s still photos and movies on the TV set. For the HDMI cable, HDMI Cable HTC-100 (sold separately) is recommended. If the picture does not appear on the TV screen, check if the [53: Video system] is correctly set to [For NTSC] or [For PAL] (depending on the video system of your TV set). 1 Connect the HDMI cable to the camera.
Viewing Images on a TV Set Adjust movie sound volume with the TV set. The sound volume cannot be adjusted with the camera. Before connecting or disconnecting the cable between the camera and TV set, turn off the camera and TV set. Depending on the TV set, part of the image displayed may be cut off. Do not connect any other device’s output to the camera’s terminal. Doing so may cause a malfunction. Certain TV sets may not be able to display the captured movies.
Viewing Images on a TV Set an image. 5 Select Point the remote control toward the TV set and press the / button to select an image. Still photo playback menu the remote control’s Enter 6 Press button. The menu appears and you can perform the playback operations Movie playback menu shown on the left. Press the / button to select the desired option, then press the Enter 2 : Return button.
K Protecting Images You can set protections to prevent the precious images from being erased accidentally. 3 Protecting a Single Image 1 Select [Protect images]. Under the [31] tab, select [Protect images], then press <0>. [Select images]. 2 Select An image will be displayed. Image protect icon the image. 3 Protect Turn the <5> dial to select the image to be protected, then press <0>. The image will be protected, and the icon will appear at the top of the screen.
K Protecting Images 3 Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [31: Protect images], all the images in the folder or on the card will be protected. To cancel the image protection, select [Unprotect all images in folder] or [Unprotect all images on card]. If you format the card (p.64), the protected images will also be erased. Movies can also be protected.
L Erasing Images You can either select and erase unnecessary images one by one or erase them in one batch. Protected images (p.376) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them. Erasing an image shot in RAW+JPEG will erase both the RAW and JPEG images. Erasing a Single Image 1 Play back the image to be erased. the button.
L Erasing Images [Select and erase images]. 2 Select Select [Select and erase images], then press <0>. An image will be displayed. the images to be erased. 3 Select Turn the <5> dial to select the image to be erased, then press <0>. A checkmark [X] will be displayed on the upper left of the screen. By pressing the button, you can select images from a three-image display. To return to the single-image display, press the button. To select another image to be erased, repeat step 3.
W Digital Print Order Format (DPOF) DPOF (Digital Print Order Format) enables you to print images recorded on the card according to your printing instructions such as the image selection, quantity to print, etc. You can print multiple images in one batch or give the print order to a photofinisher. You can set the print type, date imprinting, and file number imprinting. The print settings will be applied to all print-ordered images. (They cannot be set individually for each image.
W Digital Print Order Format (DPOF) [Print type] Print type Date File number [Date] [File No.] K Standard Prints one image on one sheet. L Index Multiple thumbnail images are printed on one sheet. K Both L Prints both the standard and index prints. On Off On Off [On] imprints the recorded date on the print. [On] imprints the file number on the print. the setting. 4 ExitPress the button. The print order screen will reappear. Next, select [Sel.
W Digital Print Order Format (DPOF) RAW images and movies cannot be print ordered. Even if [Date] and [File No.] are set to [On], the date or file number may not be imprinted depending on the print type setting and printer model. With [Index] prints, the [Date] and [File No.] cannot both be set to [On] at the same time. When printing with DPOF, use the card whose print order specifications have been set.
W Digital Print Order Format (DPOF) Print Ordering Sel.Image Select and order images one by one. By pressing the button, you can select images from a three-image display. To return to the single-image display, press the button. Press the button to save the print order to the card. Quantity Total images selected Checkmark Index icon [Standard] [Both] Press the keys to set the number of copies to be printed for the displayed image. [Index] Press <0> to add a checkmark to the box [X].
p Specifying Images for a Photobook You can specify up to 998 images to be printed in a photobook. When you use EOS Utility (EOS software) to transfer images to a computer, the specified images will be copied to a dedicated folder. This function is useful for ordering photobooks online. Specifying One Image at a Time 1 Select [Photobook Set-up]. Under the [x1] tab, select [Photobook Set-up], then press <0>. [Select images]. 2 Select An image will be displayed.
p Specifying Images for a Photobook Specifying All Images in a Folder or on a Card You can specify all the images in a folder or on a card at once. When [x1: Photobook Set-up] is set to [All images in folder] or [All images on card], all the images in the folder or on the card will be specified. To cancel the image specification, select [Clear all in folder] or [Clear all on card]. RAW images and movies cannot be specified.
Changing Image Playback Settings 3 Adjusting the LCD Monitor Brightness You can adjust the brightness of the LCD monitor to make it easier to view. 1 Select [LCD brightness]. Under the [52] tab, select [LCD brightness], then press <0>. the brightness. 2 Adjust While referring to the gray chart, press the keys, then press <0>. To check the image’s exposure, referring to the histogram is recommended (p.352).
Changing Image Playback Settings 3 Auto Rotation of Vertical Images Vertical images are rotated automatically so they are displayed vertically on the camera’s LCD monitor and on the computer instead of horizontally. You can change the setting for this feature. 1 Select [Auto rotate]. Under the [51] tab, select [Auto rotate], then press <0>. the image rotation. 2 Set Select the desired setting, then press <0>.
10 Post-Processing Images You can process RAW images, resize or crop JPEG images, and apply a Creative filter. The O icon at the upper right of the page title indicates that the function is available only in Creative Zone modes (d/ s/f/a/F). The camera may not be able to process images taken with another camera. Post-processing images as described in this chapter cannot be performed if the camera is set for multiple exposures or when it is connected to a computer via an interface cable.
R Processing RAW Images with the CameraN You can process 1 images with the camera and save them as JPEG images. As the RAW image itself does not change, you can apply different processing conditions to create any number of JPEG images from it. Note that 41 and 61 images cannot be processed with the camera. Use Digital Photo Professional (EOS software, p.512) to process those images. 1 Select [RAW image processing]. Under the [31] tab, select [RAW image processing], then press <0>.
R Processing RAW Images with the CameraN Displaying the setting screen Press <0> to display the setting screen. Turn the <5> or <6> dial to change the setting. Press <0> to finalize the setting and return to the screen in step 3. the image. 4 Save Select [W] (Save), then press <0>. Select [OK] to save the image. Check the destination folder and image file number, then select [OK]. To process another image, repeat steps 2 to 4.
R Processing RAW Images with the CameraN RAW Image Processing Options P Brightness adjustment You can adjust the image brightness up to ±1 stop in 1/3-stop increments. The displayed image will reflect the setting’s effect. Q White balance (p.162) You can select the white balance. If you select [Q] and press the button, you can select [Auto: Ambience priority] or [Auto: White priority]. If you select [P] and press the button, you can set the color temperature.
R Processing RAW Images with the CameraN U Color space (p.181) You can select either sRGB or Adobe RGB. Since the camera’s LCD monitor is not compatible with Adobe RGB, the difference in the image will hardly be perceptible when either color space is set. V Peripheral illumination correction (p.175) A phenomenon that makes the image corners look darker due to the lens characteristics can be corrected. If [Enable] is set, the corrected image will be displayed.
R Processing RAW Images with the CameraN Peripheral Illumination Correction, Distortion Correction, and Chromatic Aberration Correction To perform peripheral illumination correction, distortion correction, and chromatic aberration correction, the correction data of the lens used is necessary. If you cannot apply correction when processing RAW images in the camera, use EOS Utility (EOS software, p.512) to register the correction data to the camera.
S Resizing JPEG Images You can resize a JPEG image to make the pixel count lower and save it as a new image. Resizing an image is possible with JPEG 3/4/a/b images. JPEG c and RAW images cannot be resized. 1 Select [Resize]. Under the [32] tab, select [Resize], then press <0>. An image will be displayed. an image. 2 Select Turn the <5> dial to select the image you want to resize. By pressing the button, you can switch to the index display and select an image. the desired image size.
S Resizing JPEG Images Resize Options by Original Image Size Original Image Size 3 Available Resize Settings 4 a b c k k k k k k k k k 4 a k b Image Sizes The image sizes by aspect ratios are shown in the table below. Image Quality Aspect Ratio and Pixel Count (Approx.) 3:2 4:3 16:9 1:1 4 3552x2664 3984x2240* 2656x2656 3984x2656 (10.6 megapixels) (9.5 megapixels) (8.9 megapixels) (7.1 megapixels) a 2976x1984 2656x1992 2976x1680* 1984x1984 (5.9 megapixels) (5.3 megapixels) (5.
N Cropping JPEG Images You can crop a JPEG image and save it as another image. JPEG c and RAW images cannot be cropped. JPEG images shot with RAW+JPEG can be cropped. 1 Select [Cropping]. Under the [x2] tab, select [Cropping], then press <0>. An image will be displayed. an image. 2 Select Turn the <5> dial to select the image you want to crop. By pressing the button, you can switch to the index display and select an image.
N Cropping JPEG Images Moving the Cropping Frame Press the or keys. The cropping frame will move up, down, left, or right. You can also touch the frame and drag it to the desired position. Switching the Orientations of the Cropping Frame Press the button. The cropping frame will switch between the vertical and horizontal orientations. This also enables you to crop a horizontally shot image to look as if it was shot in vertical orientation.
U Applying Creative Filters You can apply the following Creative filters to an image and save it as a new image: Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, Water painting effect, Toy camera effect, and Miniature effect. 1 Select [Creative filters]. Under the [x1] tab, select [Creative filters], then press <0>. An image will be displayed. an image. 2 Select Turn the <5> dial to select the image you want to apply a filter to.
U Applying Creative Filters the image. 5 Save Select [OK] to save the image. Check the destination folder and image file number, then select [OK]. To apply a filter to another image, repeat steps 2 to 5. When shooting 1+JPEG images, the Creative filter will be applied to the 1 image and the image will be saved as a JPEG image. When shooting 41+JPEG or 61+JPEG images, the Creative filter will be applied to the JPEG image.
U Applying Creative Filters X Fish-eye effect Gives the effect of a fish-eye lens. The image will have a barrel-type distortion. Depending on the level of this filter effect, the area trimmed along the periphery of the image changes. Also, since this filter effect will magnify the image center, the apparent resolution at the center may degrade depending on the number of recorded pixels. Set the filter effect in step 4 while checking the resulting image.
11 Sensor Cleaning The camera has a Self Cleaning Sensor Unit to automatically shake off dust adhered to the image sensor’s front layer (low pass filter). The Dust Delete Data can also be appended to the image so that the dust spots remaining can be deleted automatically by Digital Photo Professional (EOS software, p.512).
f Automatic Sensor Cleaning Whenever you set the power switch to <1> or <2>, the Self Cleaning Sensor Unit is activated to automatically shake off the dust on the front of the sensor. Normally, you need not pay attention to this operation. However, you can choose to perform sensor cleaning manually, or disable it. Cleaning the Sensor Now 1 Select [Sensor cleaning]. Under the [53] tab, select [Sensor cleaning], then press <0>. [Clean nowf]. 2 Select Select [Clean nowf], then press <0>. Select [OK].
3 Appending Dust Delete DataN Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that may be visible on captured images. However, in case visible dust still remains, you can append the Dust Delete Data to the image for erasing the dust spots later. The Dust Delete Data is used by Digital Photo Professional (EOS software, p.512) to erase the dust spots automatically. Preparation Prepare a solid white object such as a sheet of paper. Set the lens focal length to 50 mm or longer.
3 Appending Dust Delete DataN a solid-white object. 3 Shoot At a distance of 20 cm - 30 cm (0.7 ft. - 1.0 ft.), fill the viewfinder with a patternless, solid-white object and take a picture. The picture will be taken in aperturepriority AE mode at an aperture of f/22. Since the image will not be saved, the data can still be obtained even if there is no card in the camera. When the picture is taken, the camera will start collecting the Dust Delete Data.
3 Manual Sensor CleaningN Dust that could not be removed by the automatic sensor cleaning can be removed manually with a commercially-available blower, etc. Before cleaning the sensor, detach the lens from the camera. The image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. 1 Select [Sensor cleaning]. Under the [53] tab, select [Sensor cleaning], then press <0>. 2 Select [Clean manually]. [OK].
3 Manual Sensor CleaningN When Multi Shot Noise Reduction is set, [Clean manually] cannot be selected. While cleaning the sensor, never do any of the following. If the power is cut off, the shutter will close and the shutter curtains and image sensor may get damaged. • Setting the power switch to <2>. • Removing or inserting the battery. The surface of the image sensor is extremely delicate. Clean the sensor with care. Use a plain blower without any brush attached. A brush may scratch the sensor.
12 Customizing the Camera You can make fine adjustments to various camera functions to suit your picture-taking preferences with Custom Functions. Also, current camera settings can be saved under positions of the Mode Dial. The functions explained in this chapter can be set and work only in the Creative Zone modes.
3 Setting Custom FunctionsN 1 Select [8]. the group. 2 Select Select C.Fn I, II, or III, then press <0>. Custom Function number the Custom Function 3 Select number. Press the keys to select the Custom Function number, then press <0>. the setting as desired. 4 Change Press the keys to select the desired setting (number), then press <0>. Repeat steps 2 to 4 if you want to set other Custom Functions.
3 Custom FunctionsN A LV Shooting C.Fn I: Exposure k Movie Shooting 1 Exposure level increments p.413 k k 2 ISO speed setting increments p.413 k In a 3 Bracketing auto cancel p.413 k 4 Bracketing sequence p.414 k 5 Number of bracketed shots p.414 k 6 Safety shift p.415 k A LV Shooting C.Fn II: Autofocus 1 Tracking sensitivity p.416 2 Acceleration/deceleration tracking p.417 3 AF point auto switching p.417 4 AI Servo 1st image priority p.
3 Custom FunctionsN A LV Shooting C.Fn III: Operation/Others k Movie Shooting 1 Warnings z in viewfinder p.425 2 Dial direction during Tv/Av p.425 k k 3 Retract lens on power off p.426 k k 4 Custom Controls p.
3 Custom Function SettingsN C.Fn I: Exposure C.Fn I -1 Exposure level increments 0: 1/3-stop 1: 1/2-stop Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc. This is effective when you prefer to control the exposure in less fine increments than 1/3-stop increments. When [1: 1/2-stop] is set, the exposure level will be displayed in the viewfinder and on the LCD panel as shown below. C.
3 Custom Function SettingsN C.Fn I -4 Bracketing sequence The AEB shooting sequence and white balance bracketing sequence can be changed. 0: 09-9+ 1: -909+ 2: +909White Balance Bracketing B/A Direction M/G Direction AEB 0 : Standard exposure - : Decreased exposure + : Increased exposure 0 : Standard white balance 0 : Standard white balance C.
3 Custom Function SettingsN C.Fn I -6 Safety shift 0: Disable 1: Shutter speed/Aperture Takes effect in the shutter-priority AE and aperturepriority AE modes. If the subject brightness changes and the standard exposure cannot be obtained within the autoexposure range, the camera will automatically change the manually-selected setting to obtain the standard exposure. 2: ISO speed Works in the Program AE, shutter-priority AE, and aperture-priority AE modes.
3 Custom Function SettingsN C.Fn II: Autofocus C.Fn II -1 Tracking sensitivity Sets the subject-tracking sensitivity during AI Servo AF when an obstacle cuts across the AF points or when the AF points stray from the subject. 0: Default setting suited for most subjects. Suitable for moving subjects in general. Locked on: -2 / Locked on: -1 The camera will try to continue focusing on the subject even if an obstacle cuts across the AF points or if the subject strays from the AF points.
3 Custom Function SettingsN C.Fn II -2 Acceleration/deceleration tracking This sets the tracking sensitivity for moving subjects whose speed can momentarily change dramatically by starting or stopping suddenly, etc. 0: Suited for subjects that move at a steady speed (minor changes in moving speed). +2 / +1: Effective for subjects having sudden movements, sudden acceleration/deceleration, or sudden stops.
3 Custom Function SettingsN C.Fn II -4 AI Servo 1st image priority You can set the AF operation characteristics and shutter-release timing for the first shot with AI Servo AF. Equal priority: Equal priority is given to focusing and shutter release. s: Release priority Pressing the shutter button takes the picture immediately even if focus has not been achieved. Useful when you want to give priority to capturing the image rather than achieving focus.
3 Custom Function SettingsN C.Fn II -6 AF-assist beam firing Enables or disables the built-in flash’s AF-assist beam or the EOSdedicated external Speedlite’s AF-assist beam. 0: Enable The AF-assist beam will be emitted when necessary. 1: Disable The AF-assist beam will not be emitted. This prevents the AFassist beam from disturbing others. 2: Enable external flash only If an external Speedlite is attached, it will emit the AF-assist beam when necessary.
3 Custom Function SettingsN C.Fn II -8 Select AF area selection mode You can limit the selectable AF area selection modes to suit your shooting preferences. Select the desired selection mode and press <0> to add a checkmark [X]. Then select [OK] to register the setting. E: Manual selection:1 pt AF You can select one AF point. F: Manual select.:Zone AF The AF area is divided into nine focusing zones for focusing. G: Manual select.
3 Custom Function SettingsN C.Fn II -10 Orientation linked AF point You can set the AF point or the AF area selection mode + AF point separately for vertical shooting and horizontal shooting. 0: Same for both vertical/horizontal The same AF area selection mode and manually-selected AF point (or zone) are used for both vertical shooting and horizontal shooting. 1: Separate AF pts: Area+pt The AF area selection mode and AF point (or zone) can be set separately for each camera orientation (1. Horizontal, 2.
3 Custom Function SettingsN C.Fn II -11 Initial AF Point, o AI Servo AF You can set the AI Servo AF’s starting AF point for when the AF area selection mode is set to Auto selection: 45 pt AF. 0: Auto The AF point which AI Servo AF starts with is set automatically to suit the shooting conditions. 1: Initial o AF pt selected AI Servo AF will start with the manually-selected AF point when the AF operation is set to AI Servo AF and the AF area selection mode is set to Auto selection: 45 pt AF.
3 Custom Function SettingsN With setting [0: Enable], focusing will take slightly longer than with setting [1: Disable]. Even with setting [0: Enable], the expected result may not be obtained depending on the shooting conditions and subject. Under light so low that the flash emits the AF-assist beam automatically, AF points are selected automatically based only on AF information. (The AF will not use information on colors equivalent to skin tones.) C.
3 Custom Function SettingsN C.Fn II -15 Viewfinder display illumination You can set whether or not the AF points in the viewfinder will light up in red when focus is achieved. 0: Auto The AF points automatically light up in red under low light. 1: Enable The AF points light up in red regardless of the ambient light level. 2: Disable The AF points do not light up in red.
3 Custom Function SettingsN C.Fn III: Operation/Others C.Fn III -1 Warnings z in viewfinder When any of the following functions are set, the icon can be displayed on the viewfinder’s bottom right (p.29). The icon will also appear on the shooting function settings display (p.55). Select the function for which you want the warning icon to appear, press <0> to add a checkmark [X], then select [OK]. When monochrome V is set: If the Picture Style is set to [Monochrome] (p.
3 Custom Function SettingsN C.Fn III -3 Retract lens on power off This is to set the lens retraction mechanism for when a gear-driven STM lens (such as EF40mm f/2.8 STM) is attached to the camera. You can set it to retract the extended lens automatically when the camera’s power switch is set to <2>. 0: Enable 1: Disable With auto power off, the lens will not retract regardless of the setting. Before detaching the lens, make sure that it is retracted.
8: Fine Adjustment of AF’s Point of Focus Fine adjustment of the AF’s point of focus is possible for viewfinder shooting. This is called “AF Microadjustment”. Before making the adjustment, read “General Cautions for AF Microadjustment” on page 432. Normally, this adjustment is not required. Perform this adjustment only if necessary. Note that performing this adjustment may prevent accurate focusing from being achieved.
8: Fine Adjustment of AF’s Point of Focus the adjustment. 5 Make Set the adjustment amount. The adjustable range is ±20 steps. Setting it toward “-:a” will shift the point of focus in front of the standard point of focus. Setting it toward “+:b” will shift the point of focus to the rear of the standard point of focus. After making the adjustment, press <0>. Select [1: All by same amount], then press <0>. Press the button to exit. the result of the 6 Check adjustment.
8: Fine Adjustment of AF’s Point of Focus 2: Adjust by Lens You can make the adjustment for each lens and register the adjustment in the camera. You can register the adjustment for up to 40 lenses. When you autofocus with a lens whose adjustment is registered, the point of focus will always be shifted by the adjustment amount. Set the adjustment manually by repeatedly making adjustments, shooting, and checking the results until the desired result is achieved.
8: Fine Adjustment of AF’s Point of Focus Entering the Serial Number Select the digit to be entered, then press <0> so is displayed. Enter the number, then press <0>. After entering all the digits, select [OK]. Lens Serial Number In step 3, if “ * ” appears in front of the 10-digit lens serial number, you can register only one unit of the same lens model. Even if you enter the serial number, “ * ” will remain displayed.
8: Fine Adjustment of AF’s Point of Focus Single focal length lens the adjustment. 4 Make For a zoom lens, select the wide- Zoom lens angle (W) or telephoto (T) end. Pressing <0> will turn off the frame and make the adjustment possible. Set the adjustment amount, then press <0>. The adjustable range is ±20 steps. Setting it toward “-:a” will shift the point of focus in front of the standard point of focus.
8: Fine Adjustment of AF’s Point of Focus When shooting with the intermediate range (focal length) of a zoom lens, the AF’s point of focus is corrected automatically relative to the adjustments made for the wide-angle and telephoto ends. Even if only the wide-angle or telephoto end has been adjusted, a correction will be made automatically for the intermediate range.
8: Custom Controls You can assign often-used functions to camera buttons or dials according to your preferences. 1 Select [C.Fn III: Operation/ Others]. Under the [8] tab, select [C.Fn III: Operation/Others], then press <0>. [4: Custom Controls]. 2 Select The Custom Controls screen will appear. a camera button or dial. 3 Select Select a camera button or dial, then press <0>. The name of the camera control and the assignable functions will be displayed.
8: Custom Controls Assignable Functions to Camera Controls Function a AF Exposure Page Metering and AF start b AF stop c ONE SHOT z AI SERVO/SERVO V r k k k k k k k k k 436 t S AF point direct selection q Metering start t AE lock/FE lock A AE lock A AE lock (while button pressed) T AE lock (hold) k k d FE lock k k k k k 437 k e Set ISO speed (hold button, turnS) f Flash Images Operation Exposure compensation (hold button, turnS) s Shutter speed setting in M mode
8: Custom Controls e 0* s S T T k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k * The AF stop button (0) is provided only on super telephoto IS lenses.
8: Custom Controls a: Metering and AF start When you press the button assigned to this function, metering and AF are executed. b: AF stop The AF will stop while you hold down the button assigned to this function. Useful when you want to stop the AF during AI Servo AF. c: ONE SHOT z AI SERVO/SERVO You can switch the AF operation. In One-Shot AF mode, when you hold down the button to which this function is assigned, the camera switches to AI Servo AF mode*.
8: Custom Controls q: Metering start When you press the shutter button halfway, exposure metering is performed (AF is not performed). t: AE lock/FE lock Normal shooting (No flash) When you press the button assigned to this function, you can lock the exposure (AE lock) during the metering. Useful when you want to focus and meter the shot at different areas or when you want to take multiple shots at the same exposure setting.
8: Custom Controls d: FE lock For flash photography, pressing the button assigned to this function will fire a preflash and record the required flash output (FE lock). e: Set ISO speed (hold button, turnS) You can set the ISO speed by holding down <0> and turning the <6> dial. If this control is used while ISO Auto is set, manual ISO speed setting will take effect.
8: Custom Controls g: Image quality Press <0> to display the image-recording quality setting screen (p.142) on the LCD monitor. A: Picture Style Press <0> to display the Picture Style selection setting screen on the LCD monitor (p.154). B: White balance selection Press <0> to display the white balance setting screen (p.162) on the LCD monitor. h: Depth-of-field preview When you press the depth-of-field preview button, the aperture will stop down and you can check the depth of field (p.195).
3 Registering My MenuN Under My Menu tab, you can register menu items and Custom Functions whose settings you change frequently. You can also name the registered menu tabs and press the button to display the My Menu tab first. Creating and Adding My Menu Tab 1 Select [Add My Menu tab]. Under the [9] tab, select [Add My Menu tab], then press <0>. [OK]. 2 Select The [MY MENU1] tab is created. You can create up to five menu tabs by repeating steps 1 and 2.
3 Registering My MenuN 2 Select [Select items to register]. the desired items. 3 Register Select the desired item, then press <0>. Select [OK] on the confirmation dialog. You can register up to six items. To return to the screen in step 2, press the button. My Menu Tab Settings You can sort and delete items under the menu tab, and rename or delete the menu tab. Sort registered items You can change the order of the registered items in My Menu.
3 Registering My MenuN Delete tab You can delete the My Menu tab currently displayed. Select [Delete tab] to delete the [MY MENU*] tab. Rename tab You can rename the My Menu tab from [MY MENU*]. 1 Select [Rename tab]. text. 2 Enter Press the button to delete any unnecessary characters. Press the button to toggle between the top and bottom entry areas. Press the or keys to move the n and select the desired character. Then press <0> to enter it.
3 Registering My MenuN Deleting All My Menu Tabs / Deleting All Items You can delete all My Menu tabs or all My Menu items you created. Delete all My Menu tabs You can delete all My Menu tabs you created. When you select [Delete all My Menu tabs], all the tabs from [MY MENU1] to [MY MENU5] will be deleted and the [9] tab will revert to its default. Delete all items You can delete all the items registered under the [MY MENU1] to [MY MENU5] tabs and keep the tabs. The menu tab(s) will remain.
3 Registering My MenuN Menu Display Settings You can select [Menu display] to set the menu screen that is to appear first when you press the button. Normal display Displays the last displayed menu screen. Display from My Menu tab Displays with the [9] tab selected. Display only My Menu tab Only the [9] tab is displayed. (The z, 3, 5, and 8 tabs will not be displayed.
w: Registering Custom Shooting ModesN You can register current camera settings, such as the shooting mode, menu functions, and Custom Function settings, as Custom shooting modes under the Mode Dial’s and positions. 1 Select [Custom shooting mode (C1, C2)]. Under the [54] tab, select [Custom shooting mode (C1, C2)], then press <0>. 2 Select [Register settings]. the Custom shooting 3 Register mode. Select the Custom shooting mode to be registered, then press <0>.
w: Registering Custom Shooting ModesN Settings To Be Registered Shooting functions Shooting mode, Shutter speed, Aperture, ISO speed, AF operation, AF area selection mode, AF point, Drive mode, Metering mode, Exposure compensation amount, Flash exposure compensation amount Menu functions [z1] Image quality, Image review time, Beep, Release shutter without card, Lens aberration correction, Flash firing, E-TTL II flash metering, Flash sync speed in Av mode, Red-eye reduction [z2] Exposure compensation/AE
w: Registering Custom Shooting ModesN [51] File numbering, Auto rotate [52] Auto power off, LCD brightness, LCD off/on button, Viewfinder display [53] Touch control, Auto cleaning, z button display options [54] Multi function lock [81] Exposure level increments, ISO speed setting increments, Bracketing auto cancel, Bracketing sequence, Number of bracketed shots, Safety shift [82] Tracking sensitivity, Acceleration/deceleration tracking, AF point auto switching, AI Servo 1st image priority, AI Servo 2nd ima
13 Reference This chapter provides reference information for camera features, system accessories, etc. Certification Logo Select [54: Certification Logo Display] and press <0> to display some of the logos of the camera’s certifications. Other certification logos can be found in this Instruction Manual, on the camera body, and on the camera’s package.
B Button Functions When you press the button while the camera is ready to shoot, you can display [Displays camera settings], [Electronic level] (p.72), and [Displays shooting functions] (p.451). Under the [53] tab, [z button display options] enables you to select the options displayed when the button is pressed. Select the desired display option and press <0> to add a checkmark [X]. After completing the selections, select [OK]. Note that you cannot remove the [X] for all three display options.
B Button Functions Shooting Function Settings White balance correction Shutter speed Aperture AE lock Flash exposure compensation Shooting mode ISO speed Exposure level indicator Highlight tone priority Exposure compensation Wi-Fi function Picture Style Custom Controls AF operation Image-recording quality Quick Control icon Possible shots Battery level AF point selection Wireless signal strength/ Eye-Fi card transmission status White balance GPS acquisition status Metering mode Maximum burst
3 Checking the Battery Information You can check the condition of the battery you are using on the LCD monitor. Each Battery Pack LP-E6N/LP-E6 has a unique serial number, and you can register multiple batteries to the camera. When you use this feature, you can check the registered batteries’ remaining capacity and operation history. Select [Battery info.]. Under the [53] tab, select [Battery info.], then press <0>. The battery info. screen will appear.
3 Checking the Battery Information Registering Batteries to the Camera You can register up to six LP-E6N/LP-E6 batteries to the camera. To register multiple batteries to the camera, follow the procedure below for each battery. 1 Press the button. With the battery info. screen displayed, press the button. The battery history screen will appear. If the battery is not registered, it will be grayed out. [Register]. 2 Select The confirmation dialog will appear. [OK].
3 Checking the Battery Information Labeling the Serial Number on the Battery It is convenient to label each registered Battery Pack LP-E6N/LP-E6 with their serial numbers, using commercially-available labels. 1 Serial number Write the serial number on a label. Write the serial number displayed on the battery history screen on a label approx. 25 mm x 15 mm / 1.0 in. x 0.6 in. in size. 7c40 0300 the battery and affix the 2 Remove label. Set the power switch to <2>.
3 Checking the Battery Information Checking the Remaining Capacity of a Registered Battery You can check the remaining capacity of any battery (even when not installed) and also when it was last used. Serial number Date last used Look for the serial number. Match the battery’s serial number on the battery history screen with the battery’s serial number label. You can check the respective battery’s remaining capacity and the date when it was last used.
Using a Household Power Outlet You can power the camera with a household power outlet by using the DC Coupler DR-E6 and AC Adapter AC-E6N (both sold separately). 1 Place the cord in the groove. Insert the DC coupler’s cord carefully without damaging the cord. the DC coupler. 2 Insert Open the battery compartment cover DC coupler cord hole and open the DC coupler cord hole cover. Insert the DC coupler securely until it locks and put the cord through the hole. Close the cover.
H Using Eye-Fi Cards With a commercially-available Eye-Fi card already set up, you can automatically transfer captured images to a computer or upload them to an online service via a wireless LAN. The image transfer is a function of the Eye-Fi card. For instructions on how to set up and use the Eye-Fi card or to troubleshoot any image transfer problems, refer to the Eye-Fi card’s instruction manual or contact the card manufacturer.
H Using Eye-Fi Cards the connection 4 Display information. Select [Connection info.], then press <0>. the [Access point SSID:]. 5 Check Check that an access point is displayed for [Access point SSID:]. You can also check the Eye-Fi card’s MAC address and firmware version. Press the button to exit the menu. the picture. 6 Take The picture is transferred and the Transmission status icon icon switches from gray (not connected) to one of the icons below.
H Using Eye-Fi Cards Cautions for Using Eye-Fi Cards If [Wi-Fi/NFC] under [51: Wireless communication settings] is set to [Enable], image transfer with an Eye-Fi card is not possible. If “J” is displayed, an error occurred while retrieving the card information. Turn the camera’s power switch off and on again. Even if [Eye-Fi trans.] is set to [Disable], it may still transmit a signal.
Function Availability Table by Shooting Mode Still Photo Shooting in Basic Zone Modes: A 7 C 8 o: Set automatically k: User selectable Function A 7 C Image quality settings selectable k k k : Not selectable/Disabled 8 P C x 6 F k k k k k*1 k*1 k k k k G 2 3 4 5 o o o o o Aspect ratio ISO speed Picture Style Automatically set/Auto o o o Automatically set DDD D DDD D D DDDD Manual selection Ambience-based shots k k Lighting/scene based shots Background blur Color tone Auto White balance
Function Availability Table by Shooting Mode Function AF operation One-Shot AF (Viewfinder AI Servo AF shooting) AI Focus AF AF operation One-Shot AF (Live View shooting) Servo AF AF area selection mode AF point AF AF-assist beam AF Microadjustment*2 Program shift Exposure compensation AEB AE lock Exposure Depth-of-field preview HDR shooting Multiple exposure Interval timer*2 Single shooting High-speed continuous shooting Low-speed continuous shooting Drive Silent single shooting*2 Silent continuous shooti
Function Availability Table by Shooting Mode Still Photo Shooting in Basic Zone Modes: v o: Set automatically k: User selectable Function Image quality settings selectable*1 : Not selectable/Disabled v G W X H c Z A B C D k k k k k k k k k k o o o o o o o o o o Aspect ratio ISO speed Picture Style Automatically set/Auto Manually set Automatically set PPPPPPPPPP Manual selection Ambience-based shots Lighting/scene based shots Background blur Color tone Auto White balance Q
Function Availability Table by Shooting Mode Function AF operation One-Shot AF (Viewfinder AI Servo AF shooting) AI Focus AF AF operation (Live One-Shot AF View shooting) Servo AF AF area selection mode AF point AF AF-assist beam AF Microadjustment*2 Program shift Exposure compensation AEB AE lock Exposure Depth-of-field preview HDR shooting Multiple exposure Interval timer*2 Single shooting High-speed continuous shooting Low-speed continuous shooting Drive Silent single shooting*2 Silent continuous shooti
Function Availability Table by Shooting Mode Still Photo Shooting in Creative Zone Modes o: Set automatically k: User selectable Function Image quality settings selectable Aspect ratio ISO speed Picture Style Automatically set/Auto Manually set Automatically set Manual selection : Not selectable/Disabled d s f a F k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k
Function Availability Table by Shooting Mode Function d s f a F One-Shot AF AI Servo AF AI Focus AF AF operation (Live One-Shot AF View shooting) Servo AF AF area selection mode*3 AF point AF AF-assist beam AF Microadjustment*3 Program shift Exposure compensation AEB AE lock Exposure Depth-of-field preview HDR shooting Multiple exposure Interval timer*3 Bulb timer Single shooting High-speed continuous shooting Low-speed continuous shooting Drive mode Silent single shooting*3 Silent continuous shootin
Function Availability Table by Shooting Mode Movie Shooting o: Set automatically k: User selectable Function A 7 : Not selectable/Disabled C 8 v d s f y F k Movie recording sizes selectable k k k k Digital zoom k k k k HDR movie shooting k k k k Video snapshot k k k k Time-lapse movie k k k k k k k k k k k k k k k k k k k k k k k k k k k k o o o o k o o o o k Automatically set DDDDP k k k k k Manual selection k k k k k k Creat
Function Availability Table by Shooting Mode A Function C 8 v d s f y F k a M o o o o o o o o o o Face+Tracking k k k k k k k k k k FlexiZone - Multi k k k k k k k k k k FlexiZone - Single k k k k k k k k k k Manual focus (MF) k k k k k k k k k k Movie Servo AF k k k k k k k k k k Exposure compensation k k k k *1 AE lock k k k k *2 Metering mode AF 7 Program shift Exposure Depth-of-field preview Aspect ratio Sound recor
System Map ST-E2 ST-E3-RT 270EX II 430EX III-RT/ 430EX III 600EX-RT/ 600EX Macro Ring Lite MR-14EX II Macro Twin Lite MT-24EX Bundled Accessories Magnifier MG-Eb Eyecup Eb Eyepiece Extender EP-EX15 Wide Strap Rubber Frame Eb E-series Dioptric Adjustment Lenses Battery Pack LP-E6N*1 Battery Charger LC-E6 or LC-E6E Angle Finder C AC Adapter DC Coupler AC-E6N*2 DR-E6*2 Battery Grip BG-E14 Leather Case EH21-L Hand Strap E2 468 Battery Magazine BGM-E14L for LP-E6N/LP-E6 (attached to BG-E14) C
System Map Headphones GPS Receiver Remote Remote Switch Timer Remote Controller GP-E2 Controller RS-60E3 TC-80N3 RC-6 EF lenses EF-S lenses Remote Controller Adapter RA-E3 External microphone HDMI Cable HTC-100 (2.9 m/9.5 ft.) Interface Cable IFC-400PCU (1.3 m/4.3 ft.) TV/Video Connect Station CS100 Interface Cable IFC-200U/500U (1.9 m/6.2 ft.) / (4.7 m/15.4 ft.) USB port SD/SDHC/SDXC memory card Card reader Card slot Computer *1: Battery Pack LP-E6 can also be used.
3 Menu Settings Viewfinder Shooting and Live View Shooting z: Shooting 1 (Red) Image quality Page 1* / 41* / 61* 73 / 83 / 74 / 84 / 7a / 8a / b / c 142 Image review Off / 2 sec. / 4 sec. / 8 sec.
3 Menu Settings z: Shooting 2 (Red) Page Exposure compensation/AEB 1/3- and 1/2-stop increments, ±5 stops* (AEB ±3 stops) 200 201 ISO speed settings ISO speed / Range for stills / Auto range / Minimum shutter speed for auto 148 Auto Lighting Optimizer White balance Disable / Low / Standard / High Disabled in M or B modes Q (Ambience priority) / Qw (White priority) / W/E/R/Y/U/D/O/ P (Approx.
3 Menu Settings z: Shooting 4* (Red) Page Interval timer Disable / Enable (Interval / Number of shots) 223 Bulb timer Disable / Enable (Exposure time) 205 Anti-flicker shooting Disable / Enable 179 Mirror lockup Disable / Enable 219 Aspect ratio 3:2 / 4:3 / 16:9 / 1:1 146 * In Basic Zone modes, these menu options are displayed under the [z2] tab.
3 Menu Settings x: Playback 1 (Blue) Page Protect images Protect images 376 Rotate image Rotate images 358 378 Erase images Erase images Print order Specify images to be printed (DPOF) 380 Photobook Set-up Specify images for a photobook 384 Creative filters Grainy B/W / Soft focus / Fish-eye effect / Art bold effect / Water painting effect / Toy camera effect / Miniature effect 399 RAW image processing Process 1 images 390 3: Playback 2 (Blue) Cropping Partially crop JPEG images 397
3 Menu Settings 5: Set-up 1 (Yellow) Page Select folder Create and select a folder File number Continuous / Auto reset / Manual reset 182 184 Auto rotate OnzD / OnD / Off 387 Format card Initialize and erase data on the card 64 Eye-Fi settings Displayed when a commercially-available Eye-Fi card is inserted 457 Wi-Fi/NFC: Disable / Enable Allow NFC connections Wireless communication settings Wi-Fi function: Transfer images between cameras / Connect to smartphone / Remote control (EOS Utili
3 Menu Settings 5: Set-up 3 (Yellow) Page Video system NTSC / PAL 307 373 Feature guide Enable / Disable 75 Touch control Standard / Sensitive / Disable 63 Battery information Power / Remaining capacity / Shutter count / Recharge performance / Battery registration / Serial number / Battery history 452 Auto cleaningf: Enable / Disable Sensor cleaning z button display options Clean nowf 404 Clean manually 407 Displays camera settings / Electronic level / Displays shooting functions 450 L
3 Menu Settings 5: Set-up 4 (Yellow) Page Main Dial Multi function lock Quick Control Dial Multi-controller 54 Touch control Custom shooting mode Register current camera settings to the Mode (C1, C2) Dial’s w and x positions 445 Clear all camera settings Resets the camera to the default settings 68 Copyright information Display copyright information / Enter author’s name / Enter copyright details / Delete copyright information 186 Certification Logo Display Displays some of the logos of the c
3 Menu Settings Movie Shooting z: Shooting 1 (Red) Image quality* Page 1 / 41 / 61 73 / 83 / 74 / 84 / 7a / 8a / b / c 142 Image review Off / 2 sec. / 4 sec. / 8 sec.
3 Menu Settings z: Shooting 2 (Red) Exposure compensation Page 1/3- and 1/2-stop increments, ±3 stops 200 ISO speed settings ISO speed* / Range for movies 148 332 Auto Lighting Optimizer Disable / Low / Standard / High White balance Disabled in M or B modes Q (Ambience priority) / Qw (White priority) / W/E/R/Y/U/D/O/P (Approx.
3 Menu Settings z: Shooting 4*1 (Red) Page Movie Servo AF Enable / Disable 326 AF method u+Tracking / FlexiZone - Multi / FlexiZone Single 327 MOV / MP4 306 Movie recording size (MOV format): • 1920x1080 • NTSC: 29.97p / 23.98p PAL: 25.00p Movie recording quality • ALL-I (For editing) Movie recording size (MP4 format): • 1920x1080 / 1280x720 • NTSC: 59.94p / 29.97p / 23.98p PAL: 50.00p / 25.00p • IPB (Standard) / IPB (Light) 307 Digital zoom 311 Disable / Approx.
3 Menu Settings z: Shooting 5*1 (Red) Page Metering timer 4 sec. / 8 sec. / 16 sec. / 30 sec. / 1 min. / 10 min. / 30 min. Grid display Off / 3x3 l / 6x4 m / 3x3+diag n 331 V button function a/-/q/-/a/k/q/k 331 331 Video snapshot: Enable / Disable Video snapshot Album settings: Create a new album / Add to existing album 333 Show confirm message: Enable/Disable Time-lapse movie Disable / Enable (Interval / No.
Troubleshooting Guide If a problem occurs with the camera, first consult this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center. Power-Related Problems The battery does not recharge. If the battery’s remaining capacity is 94% or higher, the battery will not be recharged (p.452). Do not use any battery other than a genuine Battery Pack LP-E6N/LPE6. The charger’s lamp blinks at high speed.
Troubleshooting Guide The access lamp still lights or blinks even when the power switch is <2>. If the power is turned off while an image is being recorded to the card, the access lamp will remain on/continue to blink for a few seconds. When the image recording is completed, the power will turn off automatically. [Does this battery/do these batteries display the Canon logo?] is displayed. Do not use any battery other than a genuine Battery Pack LP-E6N/LP-E6. Remove and install the battery again (p.
Troubleshooting Guide Shooting-Related Problems The lens cannot be attached. The camera cannot be used with EF-M lenses (p.47). The viewfinder is dark. Install a recharged battery in the camera (p.34). No images can be shot or recorded. Make sure if the card is properly inserted (p.37). Slide the card’s write-protect switch to the write/erase position (p.37). If the card is full, replace the card or delete unnecessary images to make space (p.37, 378).
Troubleshooting Guide The image is out of focus or blurred. Set the lens’s focus mode switch to (p.47). Press the shutter button gently to prevent camera shake (p.49-50). If the lens has an Image Stabilizer, set the IS switch to <1>. In low light, the shutter speed may become slow. Use a faster shutter speed (p.192), set a higher ISO speed (p.148), use flash (p.228, 233), or use a tripod. There are fewer AF points.
Troubleshooting Guide The continuous shooting speed is slow. The continuous shooting speed may become slower depending on the shutter speed, aperture, subject conditions, brightness, lens, flash use, temperature, battery type, remaining battery level, shooting function settings, etc. For details, see page 139. With FlexiZone - Multi, it takes longer to focus. Depending on the shooting conditions, it may take longer to focus on the subject. Use FlexiZone - Single or focus manually.
Troubleshooting Guide Even though I set a decreased exposure compensation, the image comes out bright. Set [z2: Auto Lighting Optimizer] to [Disable]. When [Low], [Standard], or [High] is set, even if you set a decreased exposure compensation or flash exposure compensation, the image may come out bright (p.169). The multiple-exposure image is shot in 1 quality. When the image-recording quality is set to 41 or 61, the multiple-exposure image will be recorded in 1 quality (p.218).
Troubleshooting Guide The built-in flash does not fire. If you use the built-in flash too often in too short a period of time, the flash may stop firing for a while to protect the light-emitting unit. The external flash does not fire. If you use a non-Canon flash unit with Live View shooting, set [z6: Silent LV shoot.] to [Disable] (p.272). The external flash always fires at full output. If you use a flash unit other than an EX-series Speedlite, the flash will always be fired at full output (p.
Troubleshooting Guide The camera makes a noise when it is shaken. The built-in flash’s pop-up mechanism moves slightly. This is normal and not a malfunction. The shutter makes two shutter release sounds during Live View shooting. If you use flash, the shutter will make two shutter release sounds each time you shoot (p.257). During Live View shooting, a white or red icon is displayed. It indicates that the camera’s internal temperature is high.
Troubleshooting Guide The ISO speed cannot be set for movie shooting. In shooting modes other than , the ISO speed is set automatically. In the mode, you can freely set the ISO speed (p.299). The manually set ISO speed changes when switching to movie shooting. ISO speed will be set according to the setting for [Range for stills] during viewfinder shooting and Live View shooting, or that for [Range for movies] during movie shooting with manual exposure.
Troubleshooting Guide Wireless Functions Wireless functions cannot be set. If the camera is connected to a computer, GPS receiver, or other device with an interface cable, wireless functions cannot be set ([51: Wireless communication settings] will be grayed out). Disconnect the interface cable before changing any settings. Refer to the Wireless Function Instruction Manual. Operation Problems I cannot change the setting with the <6>, <5>, <9>, or touch screen.
Troubleshooting Guide Display Problems The menu screen shows fewer tabs and options. In Basic Zone modes, certain tabs and menu options are not displayed. Set the shooting mode to a Creative Zone mode (p.58). Under the [9] tab, [Menu display] is set to [Display only My Menu tab] (p.444). The file name’s first character is an underscore (“_”). Set the color space to sRGB. If Adobe RGB is set, the first character will be an underscore (p.181). The file name starts with “MVI_”.
Troubleshooting Guide [###] is displayed. If the number of images recorded on the card exceeds the number the camera can display, [###] will be displayed (p.360). In the viewfinder, the AF point display speed is slow. In low temperatures, the display speed of the AF points may become slower due to the AF point display device’s characteristics. The display speed will return to normal at room temperature. The LCD monitor does not display a clear image.
Troubleshooting Guide The image cannot be erased. If the image is protected, it cannot be erased (p.376). The movie cannot be played back. Movies edited with a computer cannot be played back with the camera. Operation sound and mechanical sound can be heard during movie playback. If you operate the camera’s dials or lens during movie shooting, the operation sound will also be recorded. Using a commercially-available external microphone is recommended (p.313).
Troubleshooting Guide I cannot process the RAW image. 41 and 61 images cannot be processed with the camera. Use Digital Photo Professional (EOS software) to process the image (p.512). I cannot resize or crop the image. JPEG c, 1, 41, and 61 images cannot be resized or cropped with the camera (p.395). Sensor Cleaning Problems The shutter makes a noise during sensor cleaning. If you selected [Clean nowf], the shutter will make a noise, but no picture is taken (p.404).
Troubleshooting Guide Computer Connection Problems Communication between the connected camera and computer does not work. When using EOS Utility (EOS software), set [z5: Time-lapse movie] to [Disable] (p.319). I cannot download images to a computer. Install the EOS software on the computer (p.513). During a wireless connection, the camera cannot be connected to a computer via an interface cable.
Error Codes Error number If there is a problem with the camera, an error message will appear. Follow the onscreen instructions. Cause and countermeasures Number 01 02 Error Message and Solution Communications between the camera and lens is faulty. Clean the lens contacts. Clean the electrical contacts on the camera and lens, use a Canon lens, or remove and install the battery again (p.25, 26, 36). Card cannot be accessed. Reinsert/change card or format card with camera.
Specifications • Type Type: Recording media: Image sensor size: Compatible lenses: Lens mount: Digital, single-lens reflex, AF/AE camera with built-in flash SD/SDHC*/SDXC* memory cards * UHS-I cards supported Approx. 22.3 x 14.9 mm Canon EF lenses (including EF-S lenses) * Excluding EF-M lenses (35mm-equivalent angle of view is that of a lens with approx. 1.6x the focal length indicated.) Canon EF mount • Image Sensor Type: Effective pixels: Aspect ratio: Dust delete feature: CMOS sensor Approx. 24.
Specifications White balance: Noise reduction: Automatic image brightness correction: Highlight tone priority: Lens aberration correction: Auto (Ambience priority), Auto (White priority), Preset (Daylight, Shade, Cloudy, Tungsten light, White fluorescent light, Flash), Custom, Color temperature setting (approx.
Specifications Focus operation: One-Shot AF, AI Servo AF, AI Focus AF, Manual focusing (MF) AF area selection mode: Single-point AF (Manual selection), Zone AF (Manual selection of zone), Large Zone AF (manual selection of zone), 45-point automatic selection AF AF point automatic AF points can be selected automatically using selection conditions: information on colors equivalent to skin tones.
Specifications ISO speed settings: Exposure compensation: AE lock: Anti-flicker: Interval timer: Bulb timer: Range for stills, Auto range, and Minimum shutter speed for auto settable Manual: ±5 stops in 1/3- or 1/2-stop increments AEB: ±3 stops in 1/3- or 1/2-stop increments (can be combined with manual exposure compensation) Auto: Applied in One-Shot AF with evaluative metering when focus is achieved Manual: With AE lock button Possible Shooting interval and shot count settable Bulb exposure time settab
Specifications Max. burst: JPEG Large/Fine: Approx. 77 shots (approx. 110 shots) RAW: Approx. 20 shots (approx. 25 shots) RAW+JPEG Large/Fine: Approx. 20 shots (approx. 22 shots) * Figures are based on Canon’s testing standards (3:2 aspect ratio, ISO 100 and Standard Picture Style) using an 8 GB card. * Figures in parentheses apply to an UHS-I compatible 16 GB card based on Canon’s testing standards.
Specifications Creative filters: Silent LV shooting: Touch shutter: Grid display: Provided Provided (Mode 1 and 2) Provided Three types • Movie Shooting Recording format: Movie: Audio: Recording size and frame rate: Compression method: Bit rate: Focus method: AF method: Movie Servo AF: Digital zoom: Focusing brightness range: Metering mode: 502 MOV/MP4 MPEG-4 AVC / H.264 Variable (average) bit rate MOV: Linear PCM, MP4: AAC [MOV] Full HD (1920x1080): 29.97p/25.00p/23.
Specifications Metering brightness range: Exposure control: Exposure compensation: ISO speed (Recommended exposure index): ISO speed settings: HDR Movie Shooting: Creative filters for movies: Video snapshots: Sound recording: Headphones: Grid display: Time-lapse movie: Still photo shooting: EV 0 - 20 (at room temperature, ISO 100) Autoexposure shooting (Program AE for movie shooting) and manual exposure ±3 stops in 1/3- or 1/2-stop increments For autoexposure shooting: ISO 100 - ISO 12800 set automatic
Specifications • Playback Image display format: Highlight alert: AF point display: Grid display: Zoom magnification: Image browsing methods: Image rotation: Image protection: Rating: Movie playback: Slide show: Background music: Single-image display (without shooting information), Single-image display (with basic information), Singleimage display (Shooting information displayed: Detailed information, Lens/histogram, White balance, Picture Style 1, Picture Style 2, Color space/noise reduction, Lens aberra
Specifications • Interface DIGITAL terminal: Computer communication (Hi-Speed USB equivalent), GPS Receiver GP-E2, Connect Station CS100 connection Type C (Auto switching of resolution), CEC-compatible HDMI mini OUT terminal: External microphone IN 3.
Specifications • Battery Pack LP-E6N Type: Rechargeable lithium-ion battery Rated voltage: 7.2 V DC Battery capacity: 1865 mAh Working temperature 0°C - 40°C / 32°F - 104°F range: Working humidity: 85% or less Dimensions (W x H x D):Approx. 38.4 x 21.0 x 56.8 mm / 1.5 x 0.8 x 2.2 in. Weight: Approx. 80 g / 2.8 oz. (excluding protective cover) • Battery Charger LC-E6 Compatible battery: Battery Pack LP-E6N/LP-E6 Recharging time: Approx. 2 hr. 30 min. Rated input: 100 - 240 V AC (50/60 Hz) Rated output: 8.
Trademarks Adobe is a trademark of Adobe Systems Incorporated. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. SDXC logo is a trademark of SD-3C, LLC. HDMI, HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Use of genuine Canon accessories is recommended This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
Only for European Union and EEA (Norway, Iceland and Liechtenstein) These symbols indicate that this product is not to be disposed of with your household waste, according to the WEEE Directive (2012/19/EU), the Battery Directive (2006/66/EC) and/or national legislation implementing those Directives.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
14 Software Start Guide / Downloading Images to a Computer This chapter explains the following: Overview of the software for EOS cameras How to download and install the software on a computer How to download and view the Software Instruction Manuals (PDF files) How to download images from the camera to a computer 511
Software Start Guide Software Overview This section explains an overview of various software applications for EOS cameras. Internet connection is required to download and install the software. Download and installation are not possible in environments with no Internet connection. EOS Utility With the camera connected to a computer, EOS Utility enables you to transfer still photos and movies shot with the camera to the computer.
Software Start Guide Downloading and Installing the Software Do not connect the camera to your computer before you install the software. Otherwise, the software will not be installed properly. Even if a previous version of the software is installed on your computer, follow the procedure below to install the latest version. (The previous version will be overwritten.) 1 Download the software. Connect to the Internet from a computer and access the following Canon website. www.canon.
Downloading and Viewing the Software Instruction Manuals (PDF Files) Internet connection is required to download the Software Instruction Manuals (PDF files). Download is not possible in environments with no Internet connection. 1 Download the Software Instruction Manuals (PDF files). Connect to the Internet and access the following Canon website. www.canon.com/icpd Select your country or region of residence and download the Instruction Manuals. 2 View the Software Instruction Manuals (PDF files).
Downloading Images to a Computer You can use EOS software to download the images in the camera to a computer. There are two ways to do this. Downloading by Connecting the Camera to the Computer 1 Install the software (p.513). an interface cable to connect 2 Use the camera to the computer. Connect the cable to the camera’s digital terminal with the cable plug’s icon facing the front of the camera. Connect the plug to the computer’s USB terminal. EOS Utility to download the 3 Use images.
Downloading Images to a Computer Downloading Images with a Card Reader You can use a card reader to download images to a computer. Install the software (p.513). 1 the card into the card 2 Insert reader. Digital Photo Professional to 3 Use download the images. Refer to the Digital Photo Professional Instruction Manual. When downloading images from the camera to a computer with a card reader without using EOS software, copy the DCIM folder on the card to the computer.
Index Numerics 10- or 2-sec. self-timer ..................140 1280x720 (movie) .........................307 1920x1080 (movie) .......................307 45-point AF auto selection ............120 A A (Scene Intelligent Auto) ............78 Access lamp....................................38 Accessories.......................................3 Adobe RGB...................................181 AE lock..........................................203 AEB (Auto Exposure Bracketing) ...
Index Holding the camera ....................49 Settings display ........................450 Candlelight......................................91 Cards ..............................5, 25, 37, 64 Card reminder ............................38 Formatting ..................................64 Low-level formatting ...................65 Troubleshooting....................39, 65 Write protection ..........................37 Center-weighted average metering........................................199 Charger.........
Index F FE lock ..................................232, 233 Feature guide..................................75 FEB ...............................................242 File extension................................185 File name ......................................184 File size.........................143, 309, 349 Filter effects ..................................156 Final image simulation ..........261, 301 Fine (image-recording quality) ..................................143, 144 Firmware ...................
Index Images AF point display........................352 Auto playback...........................369 Auto rotation .............................387 Erasing .....................................378 File numbering..........................184 Highlight alert ...........................351 Histogram .................................352 Index display ............................353 Jump display (image browsing)...354 Magnification ............................355 Manual rotation.........................
Index M M (Manual exposure) ............196, 298 Macro photography .........................97 Magnified view ......................288, 355 Main Dial .........................................51 Manual exposure ..................196, 298 Manual focusing (MF) ...........137, 288 Manual reset .................................185 Manual selection (AF point) ..........122 Maximum burst .....................143, 145 Medium (image-recording quality) ......143, 395 Memory cards 9 Cards Menu ......................
Index O ONE SHOT (One-Shot AF)...117, 274 Orientation linked AF point ...........421 P P (Program AE) ............................190 PAL .......................................307, 475 Partial metering.............................198 Peripheral illumination correction...175 Personal white balance.................165 Photobook set-up..........................384 Picture Style..................154, 157, 160 Pixel count ....................................142 Playback .......................................
Index A (Scene Intelligent Auto) .......78 C (Creative Auto) .....................84 7 (Flash Off).............................83 8 (Special scene) P (Food)..................................89 C (Kids) ..................................90 x (Candlelight) .......................91 6 (Night Portrait) ....................92 F (Handheld Night Scene) .....93 G (HDR Backlight Control).....94 2 (Portrait)..............................95 3 (Landscape) ......................96 4 (Close-up)..........................
Index Viewing on a TV set..............363, 373 Volume (movie playback)..............366 W Warning icon .................................425 Water painting effect .....104, 268, 401 White balance (WB)......................162 Ambience priority (Q) ............163 Bracketing ................................168 Color temperature setting.........166 Correction.................................167 Custom .....................................164 Personal ...................................
CANON INC. 30-2 Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Europe, Africa & Middle East CANON EUROPA N.V. PO Box 2262, 1180 EG Amstelveen, The Netherlands For your local Canon office, please refer to your warranty card or to www.canon-europe.com/Support The product and associated warranty are provided in European countries by Canon Europa N.V. The descriptions in this Instruction Manual are current as of January 2016.
