EN
WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can be re-used). It is important to have WEEE subjected to specific treatments, in order to remove and dispose properly all pollutants, and Carefully read this manual for correct and recover and recycle all materials. Individuals can safe appliance use and for helpful tips on play an important role in ensuring that WEEE efficient maintenance.
1. GENERAL SAFETY RULES in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Children should be supervised to ensure that they do not play with the appliance. Children of less than 3 years should be kept away unless continuously supervised. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
Do not expose the washing machine to rain, direct sunlight or other weather elements. Protect from possible freezing. and The technical details (supply voltage and power input) are indicated on the product rating When moving, do not lift the plate washing machine by the knobs or detergent drawer; during Make sure that the electrical transport, never rest the door on system is earthed, complies the trolley. We recommend two with all applicable law and that people lift the washing machine.
2. INSTALLATION the 2 or 4 transportation screws (A) on the back and remove the 2 or 4 flat washers, rubber bungs and plastic spacer tubes (B) as illustrated in figure 1. If the washing machine is builtin, unscrew the 3 or 4 transportation screws (A) and remove the 3 or 4 flat washers, rubber bungs and plastic spacer tubes (B).
EN Instructions for mounting the furniture door Position the template onto the reverse of the furniture door. It is possible to mount the hinges and closure magnet on the right or left-hand side depending on your requirements. Mark the screw hole positions, then drill out these positions. Fix the hinges in place with the 4 screws provided (A). the magnet (B) in place using screw (C). Fix the plate (D) on the right or left-hand side, depending on your installation requirements.
Mount the furniture door to the front of the washer using the hinges. Fix the spacers (I) in place with the 2 screws (J) and then fix the hinges with 2 screw (H). We suggest mounting the furniture door so that it opens towards the left, which is the same direction as the porthole door. This will leave more space when you are loading washing into the appliance. Slide the washer into an opening of the size indicated in the diagram opposite.
EN Hydraulic connections Connect the water hose to the water supply tap (fig. 3) only using the hose supplied with the appliance (do not reuse old hose-sets). SOME MODELS may include one or more of the following features: HOT&COLD (fig. 4): water mains connection settings with hot and cold water for higher energy savings. Connect the grey tube to the cold water tap and the red one to the hot water tap.
Setting The washing machine should be installed in its final position such that the water fill hose is not kinked or trapped. The corrugated drain hose should be inserted into suitable drain pipe of between 50 cm and 85 cm height above the floor using the curved drain hose support. If an under sink connection is used the drain hose must be routed above the sink overfill opening to prevent back siphoning. Care must be taken to avoid kinking or trapping the drain hose (fig. 7).
The detergent draw is split into compartments as illustrated in figure 9: WARNING: 3 some detergents are not designed for use in the dispenser drawer but are supplied with their own dispenser that is placed in the drum directly. compartment "1": for prewash detergent; compartment “ ”: for special additives, softeners, starch fragrances, etc.; WARNING: only use liquid products; the washing machine is set to automatically dose additives at each cycle during the last rinse. compartment detergent.
4. PRACTICAL HINTS Maximise the load size Achieve the best use of energy, water, Load tips When sorting laundry, make sure: - have eliminated metallic objects such as hair clips, pins, coins, from laundry; - to have buttoned pillow cases, closed zips, tied loose belts and long robe ribbons; - to have removed rollers, hooks or clips from curtains; - to have carefully read clothing washing labels; - to have removed any persistent stains using specific detergents.
For washes between 40°C and 60°C the type of detergent used needs to be appropriate for the type of fabric and level of soiling. Normal powders are suitable for “white” or colour fast fabrics with high soiling, while liquid detergents or “colour protecting” powders are suitable for coloured fabrics with light levels of soiling. For washing at temperatures below 40°C we recommend the use of liquid detergents or detergents specifically labeled as suitable for low temperature washing.
5. CLEANING AND MAINTENANCE Remove and clean the filter; when Looking after your appliance correctly can extend its lifespan. Cleaning the appliance’s exterior Disconnect the machine from the power supply. finished, replace it turning it clockwise. The filter handle will be locked when it is not possible to turn any further and the handle is horizontal. Smearing a small amount of liquid soap on the filter seal will help refitting.
This washing machine automatically adjusts the level of the water to the type and quantity of washing. This system gives a reduction in energy consumption and a saving in washing times. 7. CONTROLS AND PROGRAMS Program selection Turn on the washing machine and select the required program. Adjust the washing temperature if necessary and press the required "option" buttons. Press the START/PAUSE button to start washing.
Press to start the selected cycle. Opening the door When the START/PAUSE button has been pressed, the appliance can take few seconds before it starts working. A special safety device prevents the door from being opened immediately after the end of the cycle. Wait for 2 minutes after the wash cycle has finished and the "Door Security" light has gone out before opening the door.
- Confirm by pressing the START/PAUSE button. The delay countdown will begin and when it has finished the programme will start automatically. - EASY IRON This function allows you to minimizes creases as much as possible, eliminating the intermediate spins or reducing the intensity of the last one. If an option is selected that is not compatible with the selected programme then the option indicator light first flashes and then goes off.
The key lock can be simply cancelled by SPIN SPEED button By pressing this button, it is possible to reduce the maximum speed, and if you wish, the spin cycle can be cancelled. If the label does not indicate specific information, it is possible to use the maximum spin expected in the program. pressing the two buttons simultaneously again or turning off the appliance. Digital Display The display’s indicator system allows you to be constantly informed about the status of the machine.
is pressed on the machine with the door closed, the indicator will flash momentarily and then illuminate. If the door is not properly closed, the light will continue to flash for about 7 seconds, after which the start command will be automatically cancelled. In this case, close the door in the proper way and press the START/PAUSE button. A special safety device prevents the door from being opened immediately after the end of the cycle.
Table of programmes 1) (MAX.) * PROGRAMME (see control panel) (MAX.
1) 2) 3) INFORMATION FOR THE TEST LABORATORIES STANDARD PROGRAMMES ACCORDING TO (EU) No 1015/2010 e No 1061/2010 When a programme is selected, on the display is shown the display shows the recommended wash temperature that can be reduced (where allowed) by the relevant button. ECO 40-60 PROGRAMME SETTING THE TEMPERATURE TO 40°C ECO 40-60 PROGRAMME SETTING THE TEMPERATURE TO 60°C For the programmes shown you can adjust the duration and intensity of the wash using the STAIN LEVEL button.
Description of programmes To clean different types of fabrics and various levels of dirt, the washing machine has specific programs to meet every need of washing (see table of programmes). Choose programme in accordance with the laundry instructions appearing on labels, especially the maximum recommended temperature. Cottons + Prewash This programme has been designed to remove the stronger stains from cotton white clothes. The prewash guarantees the tough dirt removal.
washing at medium temperature, this programme is recommended for laundry that is not particularly dirty. Rapid (14'/30'/44') Saving without compromising! This new programme may be used to obtain excellent results while saving water, energy, detergent and time. This option washes at a medium temperature suitable for any kind of fabric. Recommended for small loads and lightly soiled items. Perfect Cotton 59' This programme guarantees excellent results for cotton laundry.
8. TROUBLESHOOTING AND WARRANTY If you believe the washing machine is not working correctly, consult the quick guide provided below which includes some practical tips on how to fix the most common problems. ERROR CODE FORMAT Models with a display: the error is shown by a number preceded by the letter “E” (example: E2 = Error 2). Models without display: an error is shown by a sequence of flashes of every LED.
Problem Possible causes and practical solutions The washing machine does not work / start The washing machine does not spin Make sure the product is plugged into a working supply socket. Make sure power is on. Make sure the wall socket is working, testing it with another appliance such as a lamp. The door may not be correctly closed: open and close it again. Check whether the required program was correctly selected and the start button pressed.
It is always recommended to use original spare parts, that are available at our Authorised Customer Service Centres. Warranty The product is guaranteed under the terms and conditions stated on the certificate included with the product. The certificate has to be stored so as to be shown to the Authorized Customer Service Centre in case of need. You can also check the warranty conditions on our web site.
fkhldsk
- CBW D X E (21) - 21.09 - 70004576 - IDM s.r.l.