PRODUCT PROFILE This device is a new Android-based vehicle trouble diagnostic device developed for Internet applications. It inherits from OBDSTAR advanced diagnosing technology and it is characterized by covering wide range of vehicles, featuring powerful function, and providing precise result. Through motorcycle diagnostic OBD connector and variant mobile intelligent terminals, it achieves motorcycle trouble diagnosis for full car model and full system vehicle.
USER MANUAL Product:Intelligent Motorcycle Scanner Model:MS80 Revised 30 October 2020
Large number of videos help users to operate device easily. 3. Personal center: User information and the device’s configuration information. 4. Upgrade: built-in WIFI mode can realize application downloading and diagnostic function by one key upgrade. 5. System setting: set VCI formation, language, unit, Workshop information, About and Network test etc. 6. Remote assistance: achieve remote assistance by this function. 3 KNOWLEDGE OF THIS DEVICE 3.
TECHNICAL PARAMETERS ●Operation system: Android 5.1.1 ●CPU: Exynos4418 Quad Core ARM Cortex A9 1.4GHz ●Battery: 3700mA, rechargeable polymer lithium battery ●Extension memory card: 32G Micro SD (TF) card supported ●Storage capacity: 32GB ●LCD: 8.0 inch ●LCD resolution: 1280*800 ●Touch screen: Capacitive touch screen ● Camera: 5 mega rear-view camera ●Wi-Fi: supported ●Working temperature: -10℃ ~ 55℃ (14℉ ~ 131℉) ●Storage temperature: -20℃ ~ 70℃ (-4℉ ~ 158℉) ●Weight: about 1.
●Dimension: 254mm*174*mm*35mm 5 ACCESSORIES（Standard Configuration） 5.1 Main test cable 5.2 Other Connectors Other connectors are used to connect the diagnosis socket of non OBD II vehicles. To choose the connector according to the vehicle brand and models.
5.
P001 Programmer is used for key transponder renewing and EEPROM reading and writing functions, the wiring of key renewing (specific function operation is helpful in software) is as shown below; Note: Not all configurations include P001 Programmer accessories. 5.4 Others accessories DC Power Adapter (Output DC 12V/2A) To power up the tablet via connecting with outside power Supply. 6 CHARGE THIS DEVICE 1. Connect the included USB cable with charger. 2. Plug the charger into AC outlet.
3. When it connects to charger, battery logo indicates , it indicates that the battery is in charging. 4. When battery logo changes into , it indicates that the battery is fully charged and then disconnect charger from AC outlet. 5. Unplug USB cable on the charger from this device. 7 USING BATTERY ● If the battery keeps unused for a long time or battery is completely discharged, it is normal if it cannot be turned on while being charged. Please charge it for a period and then turn it on.
2. Shorten the standby time: Enter main menu, choose “Settings” > “DEVICE”> “Display” > “Sleep” to select a shorter standby time. 3. Decrease the brightness of LCD display: Enter main menu, choose “Settings” > “DEVICE” > “Display” > “Brightness”, and then drag the slider to adjust it. 4. Change “Live wallpaper” into “Gallery”. 5. Set Bluetooth off: Enter main menu, choose “Settings” > “Wireless &Network” > “Bluetooth”, and then toggle the switch to OFF. 6. Press VOLUME key to decrease the volume.
it to gallery B. Back button : go back to previous interface or exit program. C. Home button : return to the desktop D. Touch screen menu button E. DP button : select desired item : enter diagnose and program interface F. VIC button : enter system settings 10 CUSTOMIZE YOUR DESKTOP 10.1 Add items on the desktop On the main menu, hold and press the desired item, the system will automatically enter the desktop and place the icon into the circle.
in the upper middle of the screen. 2. Dragon the item to “X Delete”. 3. When the item and icon turn red and then release it. 10.4 Change your wallpaper 1. Hold and press a blank area on the desktop, a popup wallpaper will be shown on the screen. 2. Choose desired wallpaper. 3. Click upper left corner “√ to set wallpaper”. 10.5 Create a folder on the desktop 1. Drag one icon to another icon, the system will create a folder. 2. Input the folder name.
to any location. 12 AUTO-R0TATE THE SCREEN To perform such operations as browsing webpage, viewing images etc., rotate this device, the screen will automatically change the display direction. To disable this function, click “Settings” and click “display” to enter. Unselect the option “Auto-rotate the screen”. 13 LOCK&UNLOCK 13.1 Lock the screen ● When the device is ON, press POWER key to lock the screen. ● The system will lock the screen automatically after this device remains idle for a long time. 13.
2. In the notification panel, click the desired notification item to open it. 14.2 Turn off the notification panel When the notification panel is opened, click on the blank space of the screen and the notification panel will automatically retract. 15 INPUT METHOD Set input method： Enter main menu and then select “Settings”-> “Language and keyboard” to Choose desired input method. The default input method, Sogou input can support powerful word stock engine, Intelligent Sogou input and multiple keyboard mode.
The way to disable functions of this device is to set it as airplane mode. In this mode, all wireless radio waves will be off, including mobile network, Bluetooth and WLAN. Do one of the followings to enable or disable airplane mode: Press POWER key and choose “Airplane mode” from the pop-up option menu. Access the main menu, and choose “Settings” > “WLAN” > “More…” >“Airplane mode”. 1 CONNECT VCI CONNECTOR Procedure to connect VCI connector: 1. Locate motorcycles’ diagnostic socket.
For new users, please follow the 3.1 to get familiar with and start using this device. Connect the diagnostic connector –>user registration–>user login–>download or upgrade software–>select function or vehicle type–>proceed diagnosis 3 PERSONAL CENTER Used to set up and manage account details, and you can view the dealer information. 3.
corner to enter the user registration interface.
Fill in the information in each field.
3.
Display personal basic information and modify information and password. 3.2.1 Modify information 3.2.
3.2.3 View distributor information Click "View Distributor Information" to view the Distributor Contact Information.
3.2.4 Recover password Click on the forgotten password in the login interface to enter the password recover interface, fill in the relevant information to recover the password. 3.3 Recharge and expense 3.3.1 Recharge CREDIT Click "Recharge CREDIT" to recharge through 2 contact methods.
3.3.2 Upgrade configuration Click "Upgrade configuration" to upgrade the software configuration, you need to consume CREDIT.
Click“View Configuration Contrast Information” to view the configuration table. 3.3.3 Renewal fee Click "Renewal fee" to upgrade the software service years, you need to consume CREDIT.
3.3.3 Order history Click "Order history" to view the Order history.
The main interface is divided into two pages, including the following functions: Moto Diag: Enter the motorcycle diagnostic programming function. Motorboat Diag: Enter the motorboat diagnostic programming function. Moto IMMO: enter the moto IMMO programming fun ction for programming. Personal Center: new user registration, login; User details management, dealer information inquiry. Remote assistance: Realize remote hosting operation.
Upgrade: To download diagnostic software or upgrade diagnostic software to the latest version. Support Center: Provides abundant automotive technology, video data, handbook and repair case for your reference, and also including relevant information of this product. 5 START DIAGNOSING Tap on the main menu screen, and then choose “Moto Diag” to enter the function selection and vehicle selection page.
Click on the plus sign to enter the interface for selecting vehicle series and tick the square in the upper right corner to choose to add to favorites: If you want to delete favorite vehicles from Favorites, click the minus sign and remove the ticked. You can see all the downloaded software of the machine configuration.
Hereinafter, take OBDII for example, to introduce how to start diagnosing. Click on the icon of the “OBDII Engine” under the menu of other special functions.
To select software version, as following photo shown: To enter diagnostic function menu, as following photo shown:
To select AUTO SCAN, as following photo shown: 5.
Tap “Read vehicle information”, as following photo shown: 5.
5.
5.
6 SUPPORT CENTER We have powerful maintenance database and detailed product introduction information.
6.1 VIDEO CENTER Connect the diagnosis function operation videos of the actual vehicles; 6.2 Product Description Introduce the instruction manual of this product, and exhibit the basic information of the equipment, diagnosis instructions, upgrades, other applications and additional explanations of the company's products in the device. 6.
It includes VCI information, language, unit, Workshop information, user information and about etc. 7.1 VCI information 7.
7.3 Unit 7.
7.5 About Display software version updates and product announcements. 7.
The network test function is convenient for network connection failure and other phenomena during the use process. The test logs are submitted and engineers can analyze the network status of the machine through the test logs. 8 REMOTE ASSISTANCE This application can realize remote hosting operation via the Third Party’s software: Quick Support.
1 Detection System Upgrade The system APK automatically detects the version. If there is a version update, a red dot is in the upper right corner of the upgrade button.
If not, click “Esc”, you will directly return to the main interface. However you cannot enter the upgrade diagnosis application interface.
Click on the installation and perform the program installation, automatically close the program and install. After installation, click on the program image to reenter the DP program: Re-enter the main interface and prompt statement. (Notes: Ensure Internet connection is normal when updating.) 2.
Tap main screen “Bulk update”, start downloading and upgrading If a software needs to be canceled, just tap the corresponding Check Box.
search box (Fuzzy Search function). As following photo shown: After the upgrade is completed, you can enter the diagnostic programming to view the upgrade version description and the version number, and you can perform related diagnostic operations and functions. (Notes: Ensure Internet connection is normal when updating. Besides, because of many software, it may take several minutes, please wait patiently.) 1 EMAIL The function allows you to send and receive email.
device. For example: Yahoo! ®, Sohu, 163 and external device or IMAP email account of other manufacturers. 1.1 Add an email account Note: Before sending or receiving email, you have to set up an email account. In addition, this function requires a stable network connection. 1. On the desktop, tap to enter main menu screen, and then tap 2. Input email address, tap “next step” or “manual setup” 3.
2. Tap the desired account, and then tap to choose “Settings”. 3. Tap the account to be deleted to enter, and then scroll the screen until “Remove account” appears, tap it to delete. 1.3 Send an email 1. Enter main menu screen, and tap to enter account screen. 2. Tap the desired email account. 3. Tap to enter new mail writing interface. 4. Input the receiver address in to field. 5. Input a title in Subject column. 6. Enter the content in Compose email area. 7.
4. Tap the desired one to read. 2 WLAN This function enables you to enjoy surfing on the Internet and downloading data from the Internet via Wi-Fi. 2.1 Set WI-FI on 1. Enter main menu screen, choose “Settings” > WLAN 2. When the WLAN sign appears blue, it indicates Wi-Fi has been activated already. Note: To prolong the battery life, please switch Wi-Fi off when it keeps unattended. 2.
Enter main menu screen, tap to OBDSTAR the browser. You can choose the desired homepage or input the website address to browse. 1. Tap to input or edit the web link 2. Web page display area 3. Tap to open bookmarks, view history and saved web pages. 3.2 Browser webpage 1. Open the browser. 2. Input the web address, and tap “Go” on the keyboard to visit the website. Tips: Alternatively, you can also tap, and then choose “Bookmarks/History” from the pull-down list to choose the web link you want to access. 3.
• To zoom in so that the text on a webpage appears in a column that fits your device’s screen, double-tap with the tip of your finger. • To zoom in manually, place two fingers on the screen and then spread them apart. To zoom out, either double-tap again or place two fingers apart on the screen and then pinch them together. 3.4 Save favorite webpage to bookmark 1. While browsing a webpage, tap and choose “Save to bookmarks”. 2. Edit a label for the bookmark. 3. Tap “OK” to confirm and save it. 3.
While browsing a webpage, choose “Settings”, you can view or change browser settings, privacy & security setting and advanced setting etc. 4 CAMERA 4.1 Open and close camera • Enter main menu screen, tap camera. • In shoot mode, tap back button to exit the camera. 4.2 Take a photo 1. Open camera, select whether to remember the shoot spot of the photo? Tap the next step. 2. In shoot mode, aim the camera lens at the object you want to photograph and adjust it as desired. 3. Tap to take a photo. 4.
• Share, tap to send this picture to your friend or upload it online. • Edit, beatify the photo, and view the detailed information of the photo. • Tap the back button on photo interface to return to the shoot mode. 3. Swipe the screen rightwards or leftwards to view the next/previous picture. 4.4 Record a video 1. Open the camera, and swipe the screen rightwards to display button , and switch to video mode. 2. Aim the camera lens at the object you want to photograph and adjust it as desired. 3. Tap 4.
• Share, send this video file to your friend or upload it online. • Tap to back button on the video interface to return to the view state. 3. When the video is playing, swipe the screen leftwards and rightwards to control the speed of video playing, and tap to stop video playing, and tap to start video playing. 4.6 Customize camera settings In camera mode: Tap to enter camera setting screen: Tap to set camera sudoku mode; Tap to turn on /off flash mode; Tap to set timer of selfie, 3s or 10s 4.
Enter main menu screen, tap “Gallery” to access it. The system searches images and videos in this device and SD card automatically, and categorizes it into corresponding folders. 5.2 View a photo 1. Enter main menu screen, tap “Gallery”. 2. Tap the picture folder you want to view. 3. Tap the desired image to browse. 4. Swipe the screen rightwards or leftwards to view the next/previous picture. 6 MUSIC Music files are stored into 4 categories: Artists, Albums, Songs and Playlist.
You can use calculator to operate algorithm of plus, subtract, multiply and divide, and function operation of sin, cos, tan and log. 8 CALENDAR This function lets you view calendar or create to-do events. Enter main menu screen, tap “Calendar”. Swipe up and down to switch to month; Tap someday, the followings can be done. Tap to refresh, search, and hide control and setting. 9 ALARMS 9.1 Add an alarm 1. Enter main menu, and tap “Alarm”. 2. Tap to add alarms. 3. Set the detailed information of the alarm.
Tips: After the alarm is deleted, you can choose to cancel delete alarm on the right side from the option menu. 9.3 Customize your alarm 1. Enter main menu, and tap “Alarm”. 2. Tap menu button, and then choose “Settings”. 3. Alarm volume: Set the volume of alarms. 4. Set the duration of alarm. 5. Set the duration the alarm snooze next time. 6. Volume buttons: set what these buttons function when pressed during an alarm. 7. Set default ringtone: choose the alarm ringtone. 9.4 Countdown setting 1.
9.5 Second clock setting 1. Enter the main menu to tap to choose second clock; 2. Tap to start second and clock, and tap to stop second clock; 3. Tap to reset second time; 4. Tap on the right side to display the smaller unit counter of second clock; 10 ES FILE VIEWER Open ES file viewer, and enter main menu. You can manage SD card, browse by category and browse all music, picture, video, document application, package, favorites, installation package, management recommended through catalogue.
1. Enter main menu screen, tap “Settings” > “Display”. 2. When setting the rotation of device, remain the orientation of the rotated screen. 12 Set Screen Lock You can set the screen lock pattern, and when the screen is locked, it will not be unlocked until you draw the right pattern. 1. Enter main menu screen, tap “Settings” > “Security” > “Screen lock”. 2. There are several options available for your selection. To define a pattern, follow the on-screen prompts to plot your pattern. 3.
• Tap and choose “Sort by size” from the pull-down menu, the applications will be displayed in size order automatically. • Tap and choose “Reset app preferences” from the pull-down menu, a confirmation dialog box will appear on the screen, tap “Reset apps” to proceed; tap “Cancel” to abort. 3. To uninstall an application, tap it to enter the application information screen. 4. Tap “Uninstall” and then follow the on-screen instructions to finish it. 13.2 View the running applications 1.
2. Tap “Language” and choose the desired language in this device. The setting of input method The device provides several kinds of input methods. Tap setting before the desired input method. 15 SET DATE&TIME This device is preset to use the network-provided date, time zone and time. Note: If Automatic date & time is set as Use networkprovided time, date, time and time zone will not be defined. 1. Enter the main menu screen, and tap “Settings” > “Date & time”. 2.
5. Select or deselect “Use 24-hour format” to switch between 12-hour format and 24-hour format. 6. Tap “Choose date format” to choose the desired date of this device format from the list. 16 RESTORE KEY MASTER TO FACTORY SETTINGS This option enables you to restore this device to the default factory settings. Once it is reset, all data (including downloaded applications) will be deleted. Note: Before resetting to factory data, please back up all important data saved in your device. 1.
2. Uninstall: Tap “Settings” > “Apps”, and choose the desired one to uninstall. Copyright Information Copyright 2017 by OBDSTAR Technology Co.,Ltd. (called OBDSTAR for short) all rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording or otherwise) without prior written permission of OBDSTAR (hereinafter referred to as OBDSTAR).
of this unit or unauthorized modifications, repairs, or alternations to this unit, failure to strictly comply with OBDSTAR operating and maintenance instructions. OBDSTAR shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as original OBDSTAR products or the products approved by OBDSTAR.
names, logos, and company names. Other products or company names referred to in this manual may be trademarks of their respective owners. You may not use any trademark, service mark, domain name, logo, or company name of OBDSTAR or any third party without permission from the owner of the applicable trademark, service mark, domain name, logo, or company name. You may contact OBDSTAR by visiting the website at www.obdstar.com, or writing to OBDSTAR Technology Co., Ltd.
In places where this device is forbidden or using this device may cause interference or generate a potential risk, please turn off it. 3. Do not use this device while driving. 4. At medical sites, please observe the relevant regulations or rules. In areas close to medical equipment, please turn off this product. 5. Turn off this device before boarding any airplane. 6. Never place this device into apparatus with strong electromagnetic field. 7. Do not dismantle this device by yourself.
12. Please use the included battery and charger. Otherwise, explosion may happen. 13. Adhere to laws and regulations, respect people’s privacy and legal rights, during operating this device. Precautions On Using This Device The ignition switch should be OFF while plugging or unplugging the diagnostic connector. Precautions for ECU Operation 1. Do not disconnect the inner consumer when the ignition switch is on.
6. Do connect ECU harness connector firmly, otherwise, electronic elements, such as IC inside ECU, will be damaged. Safety warnings and cautions Before using and operating the device, please read and observe the following precautions to avoid dangerous or illegal conditions and to ensure the best performance of this device. Medical equipment 1.
1. Do not use this device at the gas station (repair station) or near flammable materials or chemicals, and follow all graphic or text instructions. This device may cause an explosion or fire in or around the fuel or chemical storage and transport area or in an explosive area. 2. Do not store or transport the equipment and its accessories in flame or flammable liquids, gases or explosive materials in the same box. Traffic safety 1.
3. Turn off this device where it is expressly prohibited to use the wireless device. 4. When this device is powered by the power adapter, the choice of the altitude of the product is determined by the matching adapter. For the tropical environment temperature condition, keep the ambient temperature from 0 ℃ to 40 ℃. When this device is powered by the battery, keep the ambient temperature from -10℃ to 40 ℃.
support recovery operations. Do not dispose of device, batteries and their accessories as ordinary household waste. Original accessories Use only original accessories provided by the device manufacturer. If you use any non-original accessories, are likely to affect the performance of this device, in violation of the warranty terms of this device and the country on the communication terminal products, the relevant provisions, and even lead to personal harm. Use batteries and chargers 1.
4. Do not disassemble or modify the battery to prevent the battery from leaking, overheating, igniting or bursting. 5. If the battery leaks, do not expose the skin or eyes to the leaked liquid; if it gets on the skin or eyes, rinse immediately with water and go to the hospital for medical treatment. 6. If the charger's cable is damaged, do not use it to avoid electric shock or fire. 7. Do not throw the battery into the fire, otherwise it will cause the battery to fire and burst. Repair and maintenance 1.
When the temperature below 0 ℃, the battery performance will be limited. 4. Do not use potent chemicals, cleaning agents or strong detergent cleaning device or accessories. Before cleaning and maintenance, please shut down and disconnect the charger. 5. Do not disassemble device and accessories, otherwise the device and accessories will not be covered by our warranty. 6.
accordance with the provisions of the manual Operation, etc., resulting in damage to the device or components are not covered by this warranty. Waiver statement The above warranty can be substituted for any other form of warranty.
the warranty, OBDSTAR will charge maintenance and return freight. OBDSTAR Technology Co., Ltd. Address: Floor 2, Block B3, Junfeng Industrial Park, Chongqing Road, Peace Community, Fuhai Street, Baoan District, Shenzhen, China 518000 China Declaration OBDSTAR reserves the right to change the product design and specifications without notice. Physical appearance and color may be little different from the one shown in the instruction, please take the device as the standard.
FCC Caution. (1)§ 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.
