LED FIRE DISPLAY Item #: HT9738SM / HT9738ME / HT9738LG OWNER’S MANUAL 120V AC; 60 Hz; Maximum power 1500 Watts All electric. No wood or charcoal. No gas. No venting required. WARNING Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so could result in fire, electric shock, or serious personal injury. CAUTION Keep this owner’s manual for future reference.
IMPORTANT SAFETY INFORMATION! WARNING Read all instructions before using this heater! This heater is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m)from the front of the heater, and keep them away from the sides and rear.
WARNING For residential use only! NOT for commercial use! Any commercial or public use of this heater voids all warranties, and could cause injury. This product is not intended to be a primary heat source. It is for supplemental heatonly. INDOOR use only! NEVER use this heater outdoors! Doing so may result in electricshock! Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside! NEVER modify this heater. Doing so could result in personal injury or propertydamage.
PREPARATION This insert has front panel made of GLASS! ALWAYS use extreme caution when handling glass. Failure to do so could result in personal injury or property damage. NOTE: Remove all parts and hardware from the carton and place them on a clean, soft, dry surface. Check the parts list to make sure nothing is missing. Dispose of packaging materials properly. Please recycle whenever possible.
OPERATION Read and understand this entire owner’s manual, including all safety information, before using this product. Failure to do so could cause electric shock, fire, or serious injury. NEVER leave heater unattended during operation! Failure to do so could result in personal injury or property damage. Power Make sure the ON/OFF switch, located on the control panel, is in the OFF position. Plug the power cord into a 120V AC, 15 Amp grounded outlet (see IMPORTANT SAFETY INFORMATION on Pages 2 and 3).
Remote Control BUTTON OPERATION ON/OFF Press to turn the fireplace, and the flame effect, on and off. Note: The power and the flame effect must be on for the heater to turn on. FLAME HEATER TEMP TIMER IMAGE Press to cycle the flame effect brightness through 6 different flame options. The ON/OFF button turns the flame effect on and off. Press to turn the heater on and off. Note: The power, and the flame effect, must be on for the heater to work.
CARE AND MAINTENANCE ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in electric shock, fire, or personal injury. Cleaning NEVER immerse in water or spray with water. Doing so could result in electric shock, fire, or personal injury. Wood: • Wipe gently with a slightly damp cloth or duster. • NEVER use abrasive cleansers, liquid sprays, or any cleaner that could scratch thesurface.
TROUBLESHOOTING GUIDE PROBLEM SOLUTION There is no power to the unit. 1. Make sure the power cord is plugged into a working 120VAC electrical outlet. 2. Check for a tripped circuit breaker, or a blown fuse. 3. If the unit had been working, but then turned off by itself, the temperature limiting control must be reset. Please see instructions on Page 7. The control panel doesn’t work. Make sure the ON/OFF switch on the control panel is turned on. The flame effect does not work.
WARRANTY RELATED ISSUES LIMITED WARRANTY 1. Distributed by XBrand. 2. For details, please see our website www.XBrand-inc.com PLEASE LET US HELP YOU BEFORE RETURNING TO STORE. For any questions please email us at info@XBrand-Inc.com, or visit us at www.XBrand-Inc.com. WE APPRECIATE YOUR FEEDBACK ONLINE. PLEASE HELP US REVIEW THIS PRODUCT AT YOUR PLACE OF PURCHASE.