Instructions / Assembly

3. Connect (push) electrical
wires from fixture into correct
inserts.
4. Tuck the electrical wires
into the electrical box and
position the “key slots” over
the support screws. Turn and
lock the support screws into
the “key slots”. Tighten the
support screws into place.
5. Install proper bulb type
and wattage (not included).
6. Remove the thumb
screws that are already on
your fixture. Attach the glass
shade to the fixture using the
thumb screws (tighten with
fingers only).
7. After installation, seal
around the perimeter
between the fixture and the
ceiling surface with weather
resistant caulking (not
included).
INSTALLATION:
IOL459
09/19
SAFETY PRECAUTIONS:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
DO NOT REMOVE INSULATION FROM FIXTURE.
2. WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
4. CAUTION – RISK OF FIRE. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH
CIRCUIT CONDUCTOR.
5. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A
CLEAN, SOFT CLOTH.
NOTE: Product may not look exactly as shown in figures.
1-800-267-4427 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
1. Install the mounting
bracket to the electrical box
using two electrical box
screws (not included). (Note:
Do not adjust the two
support screws at this time.)
2
. Option 1: Connect
(push) electrical wires from
electric box (house wiring)
into correct inserts.
Option 2: For multiple black
(live) & white (neutral) wires
joined in the electrical box
(house wiring), attach a single
“black” and “white” Jumper
Wire before connecting. Strip
7mm from a 6” Jumper Wires
supplied. Then connect
(push) wires into correct
inserts.
Tel: [phone], Fax: [phone]
QUESTIONS OR CONCERNS CONTACT AT:
EASY CONNECT
INSTALLATION INSTRUCTIONS
TM
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
TOOLS AND MATERIALS REQUIRED:
Phillips
Screwdriver
Easy Connect
mounting
bracket
TM
Electrical
Box
Electrical box
screws
Black (Live)
White
(Neutral)
Green
(Ground)
L
(L)
Black (Live)
(L)
Black (Live)
(N)
White
(Neutral)
Green
(Ground)
Green
(Ground)
Jumper
Wire
Jumper
Wire
Jumper
Wire
L
N
Option 1
Option 2
(N)
White
(Neutral)
L
N
(L)
Black
(Live)
(N)
White
(Neutral)
Green
(Ground)
L
N
Fixture
Key slots
Support
screws
Support
screws
Bulb
Shade
Thumb
Screw
Weather
Resistant
Caulking
(not included)