Installation Sheet

TOOLS AND MATERIALS REQUIRED:
BL16WAC
11/17
SAFETY PRECAUTIONS:
INSTALLATION:
Blade
Screwdriver
Phillips
Screwdriver
Wire Cutters
Pliers
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL OUTLET BOX.
WALL MOUNT
Electrical
Arm
Shade
Box
White
Wire
Set Screws
Screws
Arm
Gasket
Arm
Gasket
Back Plate
Back Plate
Back Plate Gasket
Back
Plate Gasket
Ground
Wire
Black Wire
1. Run black, white and green wires from fixture through arm.
2. Screw the arm onto the shade. Put the arm gasket, back plate and
back plate gasket in place. Seal other end of arm into back plate with
gasket in place.
3. Connect the ground wires (bare copper or green) from your fixture to
the ground wire (bare copper or green) or ground screw in the electrical
outlet box. Connect black wire from fixture to black wire in outlet box and
connect the white wire from fixture to white wire in outlet box.
4. Put back plate gasket in place and attach backplate to junction box
using screws provided.
5. Align fixture and secure by tightening set screws on backplate.
6. After Installation, seal around the top and side perimeter between the
fixture and the wall surface with weather resistant caulking. The bottom
should be left un-caulked to prevent moisture build-up.
7. Install proper bulb type and wattage (not included).
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING: SUITABLE FOR WET LOCATIONS WHEN
THREADS ARE SEALED WITH TEFLON
TAPE OR PIPE SEAL.
NOTE: Product may not look exactly as shown in diagrams. Bulbs are not included.
QUESTIONS OR CONCERNS CONTACT AT:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
Wiring supplies
as required by
local electrical
code
Tel: [phone], Fax: [phone]
!