MARK-IV VHF BROADBAND SIGNAL BOOSTER M4BBDAV USER’S MANUAL REVISION 0 SUBMITTED BY: CANAM TECHNOLOGY, INC.
CANAM TECHNOLOGY, INC. (CTI) MARK-IV VHF BROADBAND SIGNAL BOOSTER M4BBDAV Part 90 Signal Boosters USER’S MANUAL THIS IS A 90.219 CLASS B DEVICE WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. You MUST register Class B signal boosters (as defined in 47 CFR 90.219) online at www.fcc.gov/signal-boosters/registration.
CANAM TECHNOLOGY, INC. (CTI) MARK-IV VHF BROADBAND SIGNAL BOOSTER M4BBDAV USER’S MANUAL TABLE OF CONTENTS Section A. INTRODUCTION ..................................................................................... 4 Section B. SYSTEM DESCRIPTION ........................................................................... 6 Section C. PHYSICAL OVERWIEW .......................................................................... 7 Section D. START - UP ........................................................
CANAM TECHNOLOGY, INC. (CTI) MARK-IV VHF BROADBAND SIGNAL BOOSTER M4BBDAV Section A. USER’S MANUAL INTRODUCTION The MARK-IV VHF Broadband Signal Booster (M4BBDAV) is a Class “B” Industrial Signal Booster for FCC Part 90 PLMRS Public Safety Agencies used to operate within range 150-174 MHz for Land Mobile Radio. This document is the M4BBDAV User’s Guide Manual, intended for the Radio Technical Personnel. This manual is intended to be used with the M4BBDAV Equipment only.
CANAM TECHNOLOGY, INC. (CTI) MARK-IV VHF BROADBAND SIGNAL BOOSTER M4BBDAV USER’S MANUAL Signal boosters such as the M4BBDAV generate radio signals and, therefore, electromagnetic fields. The technical personnel should have a complete understanding of FCC CFR Title 47 sections 1.1307 and 1.1310. Recommendations are included in this Manual, but they do not substitute the FCC guidelines. M4BBDAV Key Features: Broadband Class B Signal Booster, per FCC Part 90.
CANAM TECHNOLOGY, INC. (CTI) MARK-IV VHF BROADBAND SIGNAL BOOSTER M4BBDAV Section B. USER’S MANUAL SYSTEM DESCRIPTION The system houses multi-carrier linear broadband power amplifiers and automatic level control. The amplifiers are designed with special linear characteristics for continuous operation, 100% duty cycle 24 hours/7 days a week. Its modular construction allows easy access to the amplifier modules and power supply. It has a maximum gain around 60dB across the band.
CANAM TECHNOLOGY, INC. (CTI) MARK-IV VHF BROADBAND SIGNAL BOOSTER M4BBDAV Section C. USER’S MANUAL PHYSICAL OVERWIEW Figure 1 shows the visual status that the D.U.T. front panel. Table 1 contains a brief explanation.
CANAM TECHNOLOGY, INC. (CTI) MARK-IV VHF BROADBAND SIGNAL BOOSTER M4BBDAV USER’S MANUAL Figure 2 shows the connectors and visual status that the D.U.T rear panel has. Table 2 contains a brief explanation. Figure 2 - Rear Panel details. Table 2 – Rear Panel details.
CANAM TECHNOLOGY, INC. (CTI) MARK-IV VHF BROADBAND SIGNAL BOOSTER M4BBDAV Section D. D.1 USER’S MANUAL START - UP ACCESSING D.U.T. WEB SERVER The system can be connected to a PC computer using an Ethernet crossover cable or to LAN using an Ethernet straight cable. D.1.1 Connect D.U.T to P.C computer using a crossover cable Figure 3 – D.U.T. connected directly to PC computer. 1. Use an Ethernet crossover cable for connect equipment directly to a PC computer LAN port (refer to Item #5 in Figure 2). 2.
CANAM TECHNOLOGY, INC. (CTI) MARK-IV VHF BROADBAND SIGNAL BOOSTER M4BBDAV USER’S MANUAL Configure PC computer IP address as 192.168.100.X (X is a value between 0-255) with Network Mask = 255.255.255.0. Default gateway can be same value as IP address. o Select “Obtain DNS server address automatically”. 4. Open a web browser and access the equipment by typing, in the address bar, the IP address of the equipment. o Login with username = technician, password = technician. D.1.2 Connect D.U.
CANAM TECHNOLOGY, INC. (CTI) MARK-IV VHF BROADBAND SIGNAL BOOSTER M4BBDAV D.2 USER’S MANUAL USING AND SETTING UP D.U.T 1. Open a web browser and access the equipment by typing, in the address bar, the IP address assigned to the equipment. o Login with username = technician, password = technician. o The Main Status page will be displayed if connection available. 2.
CANAM TECHNOLOGY, INC. (CTI) MARK-IV VHF BROADBAND SIGNAL BOOSTER M4BBDAV Section E. USER’S MANUAL RF CONNECTIONS 1. Use a coaxial cable to connect the test instrument input to D.U.T. RF OUT Port (refer to Item #4 in Figure 2). 2. Use a coaxial cable to connect the RF generator output to D.U.T. RF IN Port (refer to Item #1 in Figure 2).
CANAM TECHNOLOGY, INC.
