Page 28 FCC ID. : Ziploc-801 Cah Technology Co., Ltd.
Feat: FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PACKAGE CONTENTS 1 RACING WHEEL 1 FOOT PEDALS 1 OPERATION INSTRUCTION 2 DESK TOP CLAMPS Please note: In order for your wheel to operate, you have to connect the foot pedals to the wheel. Alternatively your wheel sail only operate in Gena Pad Mode.
setup Please follow the following steps to setup your Wheel and Pedal to your computer. 1. CONNECTING THE FOOT PEDAL i Locate the 4-pin male foot pedal connector on the end of the foot pedal cable. -ovate the 4-pin female connector on the wheel cable. Connecting the 4-pin male foot pedal connector to the 4-pin female connector on the wheel cable. Both 4-pin connector have a "ARROWHEAD marked on the connector. Let the "ARROWHEAD " mark opposite and you can easily connect two connectors, Il.
il. CALIBRATION WHEEL WITH PEDAL IN WINDOWS 295 (OR WINDOWS 98) Turn your computer on. Follow the steps below to calibrate your wheel and pedal. L. In Windows 95 (or Windows 98) hit START and select SETTINGS. Then select CONTROL PANEL and double click on the "GAME CONTROLLERS "icon. 2. Select the ADVANCED Tab on the top of your screen. 3. Click on CONTROLLER ID#1. 4. Click on CHANGE to open the CHANGE CONTROLLER ASSIGNMENT window. scroll down the list to select "2 AXIS, 4 BUTTON JOYSTICK" and click on OKAY.
IV. FUNCTIONS There are some special features on the wheel. Please look the follow instructions carefully to use it correctly. 1. LED INDICATORS There are 5 LED indicators on the front of wheel. @ Red LED indicator. When you connect the wheel to your computer, the red LED indicator will always light on. If you turn off your computer or unplug the wheel to your computer, the red LED indicator will light off. @ Yellow LED indicator.
If you are in the GAME PAD mode and press the center button on the front of the wheel. you are switch the wheel function to the Wheel mode and the yellow LED will go off. Your need to calibrate the wheel and pedals again to use them correctly in your game.
Game Pad Mode D-PAD Y-AXIS UP S DOWN—f~ X-AXIS UP A1 Y-AXIS DOWRY.
D-PAD 3 142 YELLOW POWER OH GAME PAD MODE) * OFF(WHEEL MODE) 1 Russo in) COME GREEN GREEN, TURBO MODE. START Y-AXIS DOWN Y-AXIS UP 7.
. IBM-PC is a registered trademark of International Business Machines Corporation. All other brand and product names listed are trademarks or registered trademarks of their respective holders. Specifications are subject to change without notice. CAN TECHNOLOGY CO., LTD. 10 NAN YUAN RD., CHUNG LI INDUSTRIAL DISTRICT, CHUNG LI CITY, TAIWAN, ROC. TEL : 886-3-451-1737 FAX : 886-3-451-2010 E-mail : syn can@ ms7. hint.