DVD5030B 3D Blu-Ray DVD Player Made in China INSTRUCTION MANUAL : WWW.CAMPOMATIC.
Content Safety Notice and Important /////////////////////////////////////////2 Using Remote & Battery/////////////////////////////////////////////5 Using Discs//////////////////////////////////////////////////////// 6 Panel Description///////////////////////////////////////////////////7 Remote Control Description///////////////////////////////////////// 8 Device Connection Description////////////////////////////////////// 9 Setup – customizing setting in the main menu//////////////////////// 22 System/////
Safety Notice and Important Warning To avoid fire and electric shock, do not expose the device to rain or moisture. To avoid electric shock, do not open the shell; only ask qualified personnel to repair. Please replace the AC power line only at the special maintenance center. Prevent the battery or the device installed with battery from overheating, such as sunlight, fire or similar heat sources. Caution The chemical apparatus in the player is harmful to eyes.
Safety Notice and Important Notice The player complies with the limit regulation on using connection cable within 3m in EMC directive. Placement •Please put the player in a ventilated place to avoid heat accumulated in the player. •Do not put the player on soft surfaces such as carpet to avoid blocking the vents. •Do not install the player in a narrow space (e.g. bookshelf or similar place).
Safety Notice and Important Important Note: The player can keep still video image or OSD image on the TV screen for long time, but it may damage the TV screen permanently. Plasma and projection TV are easily affected.
Using Remote & Battery Installing the battery Using remote control Aim the remote control at the receiver on the panel and then operate. 1.Open the battery cover. O PE N 2.Insert the battery (R03, AAA). About 7m Align the +/- polarity of the battery to the sign in the slot. 3.Put on the battery cover. CL O SE Notice for remote control operation •Do not put the remote control of the player in strong light, or else the remote control malfunctions or in disorder.
Using Discs Holding the disc: Do not touch the playing side of the disc Do not paste paper or adhesive tape on the playing side of the disc Cleaning the disc: The fingerprint and dirt on the disc surface may affect the audio and video quality. Use soft cloth to wipe the disc from center to outside. Disc storage: If the dirt can’t be cleaned with soft cloth, please wipe with wet cloth, and then use dry cloth. Do not use any solvents, e.g.
Panel Description Parts and operation guide Front panel 1 2 3 5 4 6 7 8 4.USB interface Connect USB device to this interface. 5.Front panel display 6.Eject/Insert 7.Play/Pause 8.Stop 1.Disc tray 2.ON/Standby Turn on the player or set to standby mode. 3.Remote receiver Rear panel 1 2 3 4 5 8 9 10 11 12 13 14 15 16 17 1.Left Front Channel Output 2.Left Surround Channel Output 3.Center Channel Output 4.Component Y output 5.Component Pb output 6.Component Pr output 7.
Remote Control Description Remote control While playing, press the following buttons to operate. 1 2 15 16 3 4 5 17 6 18 19 20 21 7 8 22 23 9 24 10 11 12 13 14 25 26 27 28 1. Power: turn on/off the player. 2. Screen control: access more options while playing. 3. Subtitle: select subtitle language. 4. Mute: mute or cancel mute. 5. Audio: select audio language or channel. 6. Clear: clear error. 7. OK: confirm. 8. Setup: display setup menu. 9. 0~9: select and enter numbers. 10.
Device Connection Description Video and component input Audio/video connection cable Component connection cable VIDEO!!!!R!!!!!!!!!L Audio/video input Y Pb Pr! Component input TV Connecting 5.
Device Connection Description Connecting two-channel analog input amplifier Audio input R L Audio connect cable Coaxial and fiber connection Coaxial cable Fiber cable 9 Coaxial Fiber
Device Connection Description HDMI connection HDMI OUT HDMI IN HDMI Connection TV Network connection Internet Internet MBO! Connect the network cable, configure the network in the Setup menu (refer to P16), and then the network function is available.
Setup – customizing setting in the main menu Specific setting method and description Menu Submenu Item Setting and description Screen saver (prevent screen aging) ON Enable screen saver. If there is no operation in Fifteen minutes while playing, the screen saver will be activated automatically, and enters standby mode if there is no operation in Fifteen minutes. OFF Disable this function Auto-play ON Enable auto-play. When a disc is inserted, the player will read and play automatically.
Setup – customizing setting in the main menu Specific setting method and description Menu Submenu Item Setting and description BUDA (for BD-J disc playing) disk can be used to save BD-J data.
Setup – customizing setting in the main menu Specific setting method and description Menu Submenu Item Setting and description PIP Secondary screen Primary screen OFF Disable this function. Secondary audio ON Enable secondary audio. The secondary audio function of certain BD discs allows playing the primary and secondary audio simultaneously.
Setup – customizing setting in the main menu Specific setting method and description Menu Submenu Item Setting and description Select this function and press [OK] and the screen shows the dialog box below: Change password Change password Please enter current password Press [0]-[9] to enter current password, and the following dialog box appears if the password is valid: Change password General New password Security Press [0]-[9] to enter a new password (twice) and then exit above dialog box automatic
Setup – customizing setting in the main menu Specific setting method and description Menu Submenu Security Item Setting and description Motion Picture Association of America Film Rating Child lock (allow selecting playing content according to disc rating and filtering the content improper for children) Rating Description Children Suitable for children safe G Suitable for all ages PG Watch under parent guide PG-13 Children younger than 13 watch under PGR Parent guide is required R Watch un
Setup – customizing setting in the main menu Specific setting method and description Menu General Submenu Item Setting and description Interface the USB interface in the rear side of the player must be inserted with a wireless NIC with Ralink 307× chip). To change the network access mode, please disconnect the current network connection first. Information Display the network information, such as interface, IP address, etc. Connection test Test whether the network is connected successfully.
Setup – customizing setting in the main menu Specific setting method and description Menu Submenu Item Setting and description If wireless network access is selected, it requires configuration.
Setup – customizing setting in the main menu Specific setting method and description Menu Submenu Item Setting and description the horizontal direction of the output signal will remain unchanged, and the vertical direction will be compressed to 9/16 of the horizontal width. When connected to 4:3 TV, select: 4:3 panoramic The left side and right side of 16:9 image will be cut to fit the 4:3 screen, the image quality remains unchanged, but the left and right edges are cut off.
Setup – customizing setting in the main menu Specific setting method and description Menu Submenu Item Setting and description Set color space RGB YcbCr YcbCr422 Full RGB Color space TV HDMI high color Set HDMI color depth to 30-bit, 36-bit, 48-bit or OFF. 30-bit 36-bit 48-bit OFF HDMI 1080P 24HZ Enable/disable the output of HDMI 1080P 24HZ. ON OFF HDMI 3D Enable/disable the output of 3D signal. Auto The player checks and selects whether HDMI signal outputs the signal of 3D Blu-ray disc.
Setup – customizing setting in the main menu Specific setting method and description Menu Submenu Audio output Item Setting and description Digital output (select the digital audio signal format from the digital audio output terminal) Turn off the signal output of digital audio output terminal of the player. Bit stream !PCM Re-encode OFF Bit stream: When “Bit stream” is selected, the digital audio signal will output in the format of original stream. Select when connected device can decode.
Setup – customizing setting in the main menu Specific setting method and description Menu Submenu Audio output Item Setting and description Dynamic output compression (set the dynamic compression to ON/OFF Dynamic range is the difference between the minimum audio strength higher than device noise and the maximum audio strength before distortion. Enable dynamic compression for viewing in the night.
Setup – customizing setting in the main menu Specific setting method and description Menu Audio Submenu Item Setting and description OFF Rock Pop Live Dance Postprocessing EQ System Software version info Display software version Confirm after upgrading.
Playing – Advanced Playing Operation Advanced Playing Operation 1. Using screen control menu With screen control menu, you can set and select certain playing status. In the playing state, press [Screen control] key and show the screen control menu on the screen, as shown below. CENW Press the direction key [ ] to open the audio bar, and press [ ] [ ] to switch the audio. Angle [BD-V DVD-V]: display current playing angle.
Playing – Advanced Playing Operation 2. Using OSD menu In OSD menu, you can check the current playing state. In playing state, press the [OSD] key to show the OSD menu on the screen. When playing BD-V DVD-V disc, the menu is shown below: 503:!!!!!!!!11;11;17 2!!!!3!!!!4!!!!5!!!!!6!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Uzqf;!NQ4 Upubm!ujnf;!15;25 Ujumf;!Yvxfj.
Playing – Advanced Playing Operation Play Setup Scenes Special Features SD-LIVE 3.4 In BD-LIVE menu, press direction key , [OK] and number keys to select, download the trailer, special features and interactive games, or play downloaded content. Note This function is only available when the player is connected to the network successfully. When connected to the network, it is also limited by the network speed. Please follow the content in page 16 for network setting.
Media Player – Special operation of data discs and USB playing Note: With media player, you can play the photos, music and video saved in data discs and USB devices (including HDD). Item0/4 Media Center USB1 = Type: Folder ... Photo Compatible file format Music Movie Audio MP3,AAC,WMA AVCHD Video MKV,TS,AVI,MPG,RMVB,DIVX,WMV Photo JPEG, PNG = File type Popup Menu Media Center Edit Menu Exit 4.Press the direction key to select the type of the data file to be played (e.g.
Media Player – Special operation of data discs and USB playing [Pause]: pause playing of lantern slide; [Play]: start playing lantern slide; [Next]: go to next picture; [Previous]: go to previous picture; [ ]: pause playing and convert the picture; [ ]: pause playing and mirror the picture; [ ]: pause playing and rotate the picture counterclockwise; [ ]: pause playing and rotate the picture clockwise; [ ] to select data files, and then press [OK] to play all the files in the playing list.
Troubleshooting If there is any failure, please check as below. If you are not sure with the instructions or the problems still can’t be solved, please contact your local distributor. It isn’t the problem of the player in the following cases. There is noise when the disc is rotating; Image distortion occurs in the process of scanning. Warning In any case, it is prohibited to repair the player without authorization, or else the warranty is void. Do not disassemble the shell to avoid electric shock.
Troubleshooting player according to the specification of the TV. HDMI always has output, and CVBS only has output at 720P. Therefore, certain user can’t watch BD images in CVBS, because the output resolution in the setting menu is too high; please set the resolution in HDMI state to lower than 720P. TV has no image Please make sure that the TV has been connected to the player through VIDEO OUT terminal or HDMI terminal. Please make sure that the AV selection of the TV is proper.
Troubleshooting Then, make sure that the BUDA in system setting is set to “External”. Lyrics display of MP3 The MP3 file and lyrics must have the same name, and the lyrics must be in LRC format. Support WIFI dongle Only support the ic port of Ralink 307X WIFI dongle How to adjust area code Press [Setup] to enter main menu interface, and press number “8520” to enter area code page. Blu-ray code: adjust the area code of Blu-ray discs, and enter “1”, “2” or “4” directly to select A, B or C. ! 30 .
Technical Specifications Specifications Note The specification is subject to change without prior notice. Area code The player supports the following area code. DVD Blu-ray Country/Region The Middle East Compatible media BD-Video DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R/-R DL (double-layer) VCD/SVCD Audio CD, CD-R-/CD-RW, MP3, JPEG MKV USB device File format Video: .avi、.mp4、.mkv、.rmvb、.rm、.divx、.wmv Audio: .mp3、.wma、.AAC Picture: .jpg、.gif、.
Technical Specifications Accessories Remote control and battery HDMI Cable User’s Manual ! 32