Instruction manual BHS-500 / BHS-600 Headset for Wireless Communication via Bluetooth Technology 28
Preliminary Remarks Thank you for purchasing this product. Please read this instruction manual thoroughly for proper usage and application before connecting and operating the equipment. CAMOS owns all intellectual property rights including copyright on the instruction manual, hardware and related software of the BHS-500 and BHS-600 which will be protected by Copyright Act. Without CAMOS‘s written permission, they cannot be copied, re-printed or translated into other languages.
Warranty The manufacturer would not take any responsibilty on the sales of products nor entrust the responsibilities to the 3rd party. Product warranty shall not apply to any failure or malfunction which results from improper maintenance, operation or unauthorized modification of the product.
Safety Rules Important warnings Do not use the product in a bathtub. Do not pull the plug with wet hands. This may cause an electric shock. Do not use unapproved power voltage. This may cause fire or electric shock. Do not use a damaged electric cord. This may cause fire and (or) electric shock. Be careful when thunder and lightening occurs. There is a danger of electric shock. Do not attempt to open, disassamble or repair the product by any person except an authorized service dealer.
Regulatory Information FCC compliance Information This device complies with part 15 of FCC Rules. The operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received. Including interference that may cause undesired operation. User information This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to part 15 of the FCC Rules.
Content BHS-600 Introduction Box content Recharge battery Function overview Product description Key functionalities LED Signals Headset mounting/dismounting 6 7 8 9 10 12 14 Intercom functionality Intercom functionality during listening to music Making a call during listening to music Making a call during intercom conversation Settings Headset power on/off Headset registrations & connections 15 16 Appendix Battery recharge time Headset specifications Functions BHS-500 & 600 Accept call Make a call P
Introduction Box content Headset Box Bracket A with tape Bracket B with clip Recharger 5V Additional: Instruction manual Double-sided adhesive tape Earphones 1 microphone for Full-face helmet 1 microphone for Jet/Flip-up helmet 6
Recharge battery The original headset is equipped with a Li-Polymer rechargable battery. Before using the headset for the first time, completely recharge the battery. The recharge time of the battery is two hours. 1) Charging Only recharge the unit with the included 5V recharger. Connect the headset to the charge socket. The red LED will shine during recharging process. 2) End of recharging process Recharge the battery for 2 hours.
Function overview The unit includes the following functions: Talk/Intercom functions (nur BHS-600) Telephone functions • Intercom functionality between driver & passenger • Automatic call detection • Redialing • Voice dialing / VOX • Call acceptance during intercom functionality; at incoming call, the intercom functionality will be muted automatically • Finish call • Interrupt intercom functionality • Adjust volume • Start intercom functionality • Re-direct call to headset Music functions • Play m
Product description Green LED (only BHS-600) Bracket A Red LED „+“ Key „-“ Key Bracket B TALK-Key Pairing Switch5 (CH1/CH2, only BHS-600 ) Reset-Key Master/Slave Switch (only BHS-600) DC 5V 9
Key functionalities Functionalities No. 1 2 3 4 Key Channel 1 (BHS-500 & 600) • Power on/off: Press key for 3 seconds • Minimize volume • Channel 2 (only BHS-600) • Minimize volume Maximize volume • Power on/off: Press key for 3 seconds • Pairing BHS-500: Press the key for 3 sec. until the red LED is blinking very fast • Mazimise volume • Redialing: Press key 1x • Re-direct call: Press key during ringing for 2 sec. • Voice dialing: Press key for 2 sec.
Functions No. Key 5 Choose Master / Slave for channel 2 (Switch sideways) 6 Reset Key (Below CH1/CH2 switch) 7 „-“ & „ +“ Key Channel 1 (BHS-500 & 600) Channel 2 (nur BHS-600) • / For pairing channel 2 change to Master or Slave according to usage Reset of all settings. • Play/stop music: Press both keys together for 3 Sec. 11 • Start/interrupt conversation: Press both keys together for 3 Sec.
LED signals Mode Key Key operation time Display red LED Display green LED Activate CH 1: „-“ Key 3 sec. Flashing for 2 sec., then Stand-by mode / Activate CH 2: „+“ Key 3 sec. / Flashing for 2 sec., then Stand-by mode / Every 100 ms 1x flashing/Sec. Stand-by / Switch off CH 1: „-“ Key 2 sec. interval flashing, then the LED will be turned off / Switch off CH 2: „+“ Key / 2 sec. interval-flashing, then the LED will be turned off Fast flashing for 3 sec.
Mode Key Key operation time Display red LED Display green LED Voice dialing „T“ Key 2 Sec. Finish call „T“ Key Press shortly / / / / Play music „-“ & „ +“ Key Press together for 3 Sec. / / Stop music „-“ & „ +“ Key Press together for 3 Sec. / / Low battery status / / Interval flashing every 3 Sec.
Headset mounting/dismounting 1. Fix bracket A backside or sideways on your helmet by using the double sided adhesive tape 3. Alternatively to this you can also use the clip (bracket B) to mount the helmet sideways (see fig. 2) 14 2.
Settings Headset power on/off The headsets will be switched on/off differently depending on the channel. If you want to switch on the headset, please press the relevant key for 3 sec. If you press this key again, the headset will be switched off. CH 1 „-“ Key „+“ Key CH2 Power on: Press key for 3 sec. Power off: Press key for 3 sec. / / Power on: Press key for 3 sec. Power off: Press key for 3 sec. Volume Press „+“ or „-“ key to change the volume. The volume can be changed at any time during driving.
Headset registration & connection To use the headset, you have to connect it to another wireless Bluetooth device. If this device has a display, the headsets will be displayed as CAMOS BHS-600 or CAMOS BHS-500. 1.) Connect headset with mobile phone (Channel 1) 1a) BHS-500: Press the „-“ key to activate the headset. After this, press the „+“ key until the red LED is blinking fast. Activate the Bluetooth function of your mobile phone simultaneously.
2.) Connect the headset with audio device (Channel 1) 1a) BHS-500: Press the „-“ key to activate the headset. After this, press the „+“ key until the red LED is blinking fast. Activate the Bluetooth function of your audio device simultaneously. 1b) BHS-600: After the headset has been switsched on, enable the headset on channel 1 (CH 1) and press the „-“ key for 3 sec. Activate the Bluetooth function of your mobile phone simultaneously.
4.) Connect Two Way Radio on channel 2 (only BHS-600) Instead of intercom function you can link a two way radio which is equipped with a bluetooth adapter. 1) Switch the headset‘s key in „Slave Mode“ position. 2) Switch the Pairing-key of your headset from position CH2 for a short time to position CH1 and back to CH2. 5.) Connect mobile phone on channel 2 (only BHS-600) If you don‘t need the intercom function the BHS-600 enables you to connect a mobile phone on channel 2.
Important notes to 3 • Channel 1 can only be used for the connection to another Bluetooth device. • Channel 2 is for intercom functionality between two wireless Bluetooth BHS-600 headsets. • If you want to change the Bluetooth device on channel 1, you have to switch off the firstly connected Bluetooth unit before you can connect it to another Bluetooth device. • Once conntected, the paired Bluetooth devices will find each other automatically if the Bluetooth functionality is activated on both units.
Functions 1.) Accept call 1) After you connected the headset with your mobile phone as described before, you can make calls and accept them. (Please consider your local laws/road traffic regulations). 2) Both headsets, BHS-500 & 600, enbable automatic call acceptance with your mobile phone. Please make sure that this functionality is also activated in your phone menu. Otherwise thisfunctionality will not work. 3) To finish the call, shortly press the „T“ button. 2.
Important notes • Please study your mobile phone manual to make sure that your phone supports voice dialing. • If the connection between headset and mobile phone is interrupted because of an extremly long distance between these two devices, the headset will autimatically try to reconnect the systems within the next 30 minutes as soon as the two devices get nearer than 10 meters. • When these 30 minutes are over, shortly press the „-“ or „+“ button again to automatically reconnect the two devices.
3.) Play music 1) Listening to music through mobile phone a) Connect your headset with your mobile phone. b) Activate the music function of your mobile phone. Please refer to the manual of your mobile phone as well. c) To stop the music, press both buttons, „-“ & „+“, for three seconds at the same time. d) To start the music, press both buttons, „-“ & „+“, for three seconds at the same time. Depending on your mobile phone, only MP3 files can be played through the headset.
4.) Intercom functionality (only BHS-600) a) After you connected both BHS-600 headsets, you can use the intercom functionality. b) To stop the conversation, press both buttons, „-“ & „+“, for 1 second at the same time. c) To go on with the conversation, press both buttons, „-“ & „+“, for 2 seconds at the same time. 5.) Intercom functionality while listening to music (only BHS-600) a) Connect channel 1 with your mobile phone or audio device and activate the music. b) Connect the two BHS-600 on channel 2.
6.) Incoming call while listening to music 1) Receiving a call and listening to music via mobile phone Important note: This functionality is not possible with all mobile phones. Please check with the manual of your mobile phone. a) Connect your phone with your headset on channel 1. b) At incoming call, the music will be automatically muted so that you can answer the call. If you finish the call with the „T“ button, the music gets switched on automatically again.
Important notes to 6/2 • The music on your audio device can be automatically activated again, if you press the „T“ button to finish the call. • If you want to connect a mobile phone & audio device to one channel at the same time, please note that you have to use a stereo-audio-device only. • If you shortly press the „T“ button, the music will be interrupted and the phone dials the last dialed number. At some phones, the „T“ button must be pressed twice.
7.) Incoming call during intercom conversation (only BHS-600) a) Connect two headsets like described on page 43. b) Connect your phone with your headset (channel 1). c) If you receive an incoming call, the intercom functionality will be interrupted during the call. d) After the call is finished, you can automatically talk to your passenger again.
Specifications of BHS-500 & BHS-600 Name Wireless data communication system (BHS-500 / BHS-600) Bluetooth version 2.0 Frequency 2,4022 ~ 2,480 MHz Transmission output 0,25 ~ 2,5 mW Wireless distance Up to 10m Dimensions (WxHxD) 51 x 90 x 20,5 Weight 120g Operating temperature -20 ~ 50°C Recharger AC 100 ~ 240V , 50/60Hz DC power DC 5V, 1A Contact address for Europe: Camos motorcom / iMC GmbH Car-Zeiss-Str. 3 D-22946 Trittau Tel. +49 (0)4154 80 83 0 www.imc-motorcom.
Printed in Korea 28
