Installation Instructions

ManualsBrandsCambridge Mobile Telematics ManualsElectronicsDriveWell Tag

CONFIDENTIAL & PROPRIETARY

314 Main Street, Suite 1200 Cambridge, MA 02142

(800) 941-7177 cmtelematics.com

DriveWell Tag

The DriveWell Tag is a Bluetooth Low Energy (BLE) device with an

embedded accelerometer and clock that is used to measure vehicle

dynamics.

Designed to augment smartphone sensors as part of a telematics

program, the Tag continuously captures and records all drives for a

given vehicle, even when the smartphone is absent.

The Tag is affixed to the vehicle’s windshield and is configured to securely

pass its recorded data to the smartphone via BLE for an enhanced, highly

accurate picture of each drive.

System Requirements

The system requires an iOS or Android smartphone that can connect to a

cellular network with a data plan. To minimize data plan usage, it is possible to select an option

within the app to upload trip data via Wi-Fi. If this option is selected, trip processing and data

availability may be delayed until the next time the app is connected to Wi-Fi.

The app requires access to Location Services to function properly. The app will ask for permission

to use Location Services. Users must allow Location Services to ensure correct performance of the

system.

For the Tag to be able to communicate with the smartphone, Bluetooth needs to be active during

each trip. Bluetooth must be enabled for the system to function properly, and the app will request

permission to use Bluetooth.

The Tag must be affixed properly in the vehicle using the provided adhesive backing tape to record

reliable data.

Overview

To use the system, you will need the enclosed Tag as well as a Bluetooth-enabled

smartphone with a recent operating system (Android or iOS).

Install the app, open it, and follow the on-screen prompts to register the app using the provided

activation code. Once registration is complete, you will need to activate the Tag by following the

prompts in the app.

Finally, you will need to affix the Tag securely in the vehicle using the tape on the back of the

device. CMT recommends placing the Tag on the center of the windshield, below the back of the

rear view mirror.

Summary of content (4 pages)

PAGE 1
DriveWell Tag The DriveWell Tag is a Bluetooth Low Energy (BLE) device with an embedded accelerometer and clock that is used to measure vehicle dynamics. Designed to augment smartphone sensors as part of a telematics program, the Tag continuously captures and records all drives for a given vehicle, even when the smartphone is absent.
PAGE 2
Tag Linking To link a new Tag to your smartphone, do the following: 1. Ensure the device has a network connection and that Bluetooth is turned on. 2. Use the smartphone to launch the telematics app with the provided activation code. 3. Accept the app permissions you are prompted to accept, including Bluetooth and Location. 4. Select your vehicle from the list of vehicles displayed in the app. The app displays only vehicles associated with you. 5.
PAGE 3
Care & Safety Make sure the Tag remains dry and follow the care instructions below: • Never open the Tag. • If the battery in the Tag becomes low, request a replacement Tag. • Wipe the Tag with a clean cloth. Should fluids enter the Tag, it may affect the functioning of the Tag, and cause the Tag to need replacement. Trademarks Android is a trademark of Google, Inc. iOS is a registered trademark of Cisco Systems, Inc, licensed to Apple, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc.
PAGE 4
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.