Technical Specs

•
Balanced Mode Radiator
(BMR)
driver combining bending wave technology for
higher frequencies, with pistonic driver
movement for lower frequencies
• Single BMR
driver to seamlessly c
entire frequency range
from 120Hz to 20kHz
•
IP65 rated for suitability in high humidity and
dusty environments
Minx C46 In-
Ceiling S
Detailed Specifications
Sensitivity (SPL)
Frequency response
Impedance
Recommended amplifier power
Drivers
Dimensions
Weight
*Using a high powered amplifier lower down its volume scale results in lower distortion and better sound. Of course if
you hear a distorted sound or mechanical ‘crack’ as the speakers hit their end stops, you are playing the speakers
too loud and this may cause damage. With an AVR the Minx C46 speakers should be set to ‘small’ with a crossover
frequency of 140Hz. In this configuration, power handling is considerable increased.
Tested in accordance with appropriate requirements of IEC/E
ingress.
(BMR)
full range
driver combining bending wave technology for
higher frequencies, with pistonic driver
movement for lower frequencies
driver to seamlessly c
over the
from 120Hz to 20kHz
IP65 rated for suitability in high humidity and
•
Incredibly wide dispersion from the BMR
driver
fills the room and
any ‘sweet spot’ problem
• Metal back box
integrat
• Fits into
standard 75mm (3’’) ceiling spotlight
mounting hole
• Ceiling mount
and c
Ceiling S
peaker
Detailed Specifications
86dB (2.83 Vrms input)
120Hz – 20kHz
8 Ohms compatible
15-200 Watts *
1 x 2.25’’ (57mm) BMR driver
98mm (3.6’’) height x 88mm (3.4’’)
diameter (inc.
Inside diameter/mounting hole required: 75mm (3’’)
0.46kg (1.01 lbs)
*Using a high powered amplifier lower down its volume scale results in lower distortion and better sound. Of course if
you hear a distorted sound or mechanical ‘crack’ as the speakers hit their end stops, you are playing the speakers
too loud and this may cause damage. With an AVR the Minx C46 speakers should be set to ‘small’ with a crossover
frequency of 140Hz. In this configuration, power handling is considerable increased.
Tested in accordance with appropriate requirements of IEC/E
N 60529, this product is rated IP65 for dust and water
Incredibly wide dispersion from the BMR
fills the room and
virtually eliminates
any ‘sweet spot’ problem
s
integrat
ed into the product
standard 75mm (3’’) ceiling spotlight
and c
utting template included
diameter (inc.
outer bezel)
Inside diameter/mounting hole required: 75mm (3’’)
*Using a high powered amplifier lower down its volume scale results in lower distortion and better sound. Of course if
you hear a distorted sound or mechanical ‘crack’ as the speakers hit their end stops, you are playing the speakers
too loud and this may cause damage. With an AVR the Minx C46 speakers should be set to ‘small’ with a crossover
N 60529, this product is rated IP65 for dust and water