Product Info
Table Of Contents
- Contents
- About This User Guide
- Chapter 1: Product Description
- Chapter 2: Basic Settings
- Chapter 3: Advanced Configuration
- Chapter 4: Troubleshooting Guide
- Appendix: Third Party Software
- Appendix: General Details
- Glossary
Chapter 3: Advanced Configuration Network
Page
52
Table 16 LAN port
Field Name
Description
IP Address Enter the IP address of the router on the local area network. All the IP
addresses of the computers which are in the router’s LAN must be in
the same network segment with this address, and the default gateway
of the computers must be this IP address. (The default is 192.168.11.1).
Local Subnet Mask Enter the subnet mask to determine the size of the network (default is
255.255.255.0/24).
Local DHCP Server Enable/Disable Local DHCP Server.
DHCP Start
Address
Enter a valid IP address as a starting IP address of the DHCP server,
and if the router’s LAN IP address is 192.168.11.1, starting IP address
can be 192.168.11.2 or greater, but should be less than the ending IP
address.
DHCP End Address Enter a valid IP address as an end IP address of the DHCP pool.