Product Info

Chapter 2: Basic Settings Hardware Installation
Page
19
2.
WAN Port IP
Address
1. Pick up phone and press “****” to start IVR
2. Choose “2”, and cnPilot Home Router reports current WAN
Port IP Address
3. Input the new WAN port IP address and press “#” key:
4. Use “*” to replace “.”, for example user can input
192*168*20*168 to set the new IP address 192.168.20.168
5. Press # key to indicate that you have finished
Report “operation successful” if user operation is ok.
6. To quit, enter “**”.
1
Network
configuration
3. WAN Port
Subnet Mask
1. Pick up phone and press “****” to start IVR
2. Choose “3”, and cnPilot Home Router reports current WAN
port subnet mask
3. Input a new WAN port subnet mask and press # key:
4. Use “*” to replace “.”, user can input
255*255*255*0 to set the
new WAN port subnet mask 255.255.255.0
5. Press “#” key to indicate that you have finished
Report “operation successful” if user operation is ok.
6. To quit, enter “**”.
4. Gateway
1. Pick up phone and press “****” to start IVR
2. Choose “4”, and cnPilot Home Router reports current gateway
3. Input the new gateway and press “#” key:
4. Use “*” to replace “.”, user can input 192*168*20*1 to set the
new gateway 192.168.20.1.
5. Press “#” key to indicate that you have finished.
Report “operation successful” if user operation is ok.
6. To quit, press “**”.