ZXSDR R8862A S7100 User Manual ® Caltta Technologies. All rights reserved.
ZXSDR R8862A S7100 Product Description Internal Use Only▲ © 2020 Caltta Technologies. All rights reserved. 2020 Copyright Caltta Technologies Co.,Ltd. All rights reserved Copyright statement: The copyright of this document belongs to Caltta Technologies Co.,Ltd. Text contains proprietary information owned by Caltta Technologies Co.,Ltd., without the written permission of Caltta Technologies Co.,Ltd.
ZXSDR R8862A S7100 Product Description Internal Use Only ▲ Catalog 1 Overview....................................................................................................................................................5 1.1 Introduction..................................................................................................................................... 5 1.2 Benefits......................................................................................................................
ZXSDR R8862A S7100 Product Description Internal Use Only▲ 1 Overview 1.1 Introduction This document provides a high level description of ZXSDR R8862A S7100 (hereinafter ZXSDR R8862A S7100), which is one new compact distributed RRU (Remote Radio Unit) used in ZTE wireless total solution. The RRU is based on common ZTE compacted RRU platform.and can work in LTE single mode or MultiMode at the same frequency band. 1.
ZXSDR R8862A S7100 Product Description Internal Use Only ▲ 2 Functionality 2.1 Physical Appearance ZXSDR R8862A S7100 2.2 Functionality ZXSDR R8862A S7100 is the remote radio unit of distributed base station. The signal is transmitted /received through ZXSDR R8862A S7100 to/from base band processing unit for further processing via standard CPRI interface. By applying the distributed system, the feeder loss will be eliminated when the radio unit is positioned close to the antenna.
ZXSDR R8862A S7100 Product Description Internal Use Only▲ Support transmit channel switching on/off function ZXSDR R8862A S7100 software failure will not affect the running of BBU and other ZXSDR R8862A S7100s which are connected to it.
ZXSDR R8862A S7100 Product Description Internal Use Only▲ 4 Interface Indices The external interfaces of the R8862A are located at the bottom and on the front side of the chassis. For a description of the external interfaces at the bottom of the R8862A chassis, refer to Table 4-1. Table 4-1 No.
ZXSDR R8862A S7100 Product Description Internal Use Only▲ 5 Application Scenarios R8862A as the Remote Radio Unit (RRU) and Baseband Unit (BBU) comprise distributed macro eNodeB BS8700. Typical application scenarios of BS8700 are shown in the following figure: ® Caltta Technologies. All rights reserved.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.
